Database Info

[MICROMAX A110] ROM of Mobistel Cynus T2

DISCLAIMER : DON’T BE HASTY “HASTE MAKES WASTE”
TRY AT UR OWN RISK.
I AM NOT RESPONSIBLE FOR BRICKING UR DEVICES,DEAD SD CARDS AND MANY THINGS..
We are not responsible for anything. This ROM has been tested 100% working before being posted here.
ROM of Mobistel Cynus T2
The ROM remains ultimately stock and the partitions will be untouched during the flashing process. The changes are
- 12MP Rear Cam
- 1.3MP Front Cam
- Better Speed in 3G
- Great Sound output than both the stock ROMS (V1 & V2)
- Better adobe flash performance in browsers
- Brighter Flash intensity than V2
- Lesser battery drain compared to bothe the stock ROMS
- Super smooth and Super Stable
- Comes with official Mobistel UI
Antutu Score - 6415
Quadrant Score - 2604
Again reminding everybody about the idea of this ROM. We tested whether MC T2 ROMs will boot on system as Mobistel is lauching its JB update in the first week of JAN. This ROM was so stable and perfect for our device too which ensures no need of port of JB from other devices as it will be readily available for our devices too even before Micromax releases it (if they ever had a idea of that).
Rom Flashing Steps:
First you need to revert to stock recovery as this ROM will not get updated to CWM recovery.
Then copy the ROM in your internal sd card.
Enter stock recovery by pressing (Vol+)+(Vol-)+Power. Then press Vol+ button once the option screen turns up.
Flash the ROM.(No need to wipe cache and Dalvik cache)
Reboot the device.
Go to settings-backup & reset-factory data reset.
No lags found so far. If you find something please post it as comments below.
Once again Thanks for your help and Co-Operation for the testing{ Kishore Kanna}
Mediafire upload credits to Rameez Shaik.
ALL CREDITS GOES TO Kishore Kanna AND Rameez Shaik
MEDIAFIRE LINK : http://www.mediafire.com/?8phwxmo8bqtwm7l
NEW SCREENSHOTS ARE HERE AND
1.NO LIGHT SENSOR
2.MAGNETIC SENSOR SHOWN BUT NOT WORKING
3.TV OUT [USERS U SHOULD CHECK AND REPLY]
4.GPS LOCKS FASTER
5.SOUND ENHANCED[LITTLE LOUDER]
REMAINING SAME AS MMX A110
NOTE; ONLY WORKS IN STOCK V2 ROM AND I HAVE NO ISSUES WITH SIM NETWORK AND 3G
JELLY BEAN HAS BEEN RELEASED BY MOBISTEL
LINK:http://mobistel.de/downloads/CynusT2JellyBean_V15.01.zip

Nice
Sent from my Micromax A110 using xda app-developers app

Superb check for auto brightness and tv out functions please in this rom...
Sent from my GT-I5800 using xda premium

Just flashed it
First impressions are good...yet to test camera and flash intensity but device is genrally little more smoother that stock v1/v2 of mmx.
Rooted, about to instal CWM.Will keep you guys posted.:victory:
But seriously--12mp n 1.3 mp...why was mmx limiting the hardware specs like this??
No auto brightness
images andvideos are now by default stored on external memory unlike v2
Flash is definately brighter than V2
Edit:: Just saw a tv out option in display settings....but i confess that i dont know how to use it
More learned men kindly tell me about this tv out.
Edit 2:: Just saw the option for wifi direct.now sure wether it is working or not...it did turn on upon ticking the box however the settings didnt popup for them upon opening.
Edit 3:: Installed CWM...taking backup now.

Will update about everything tomorrow including TV out and light sensor
And thank me if useful :beer:
Sent from my Micromax A110 using xda premium

check out the specs of mobistel cynus t2...
check for magnetic sensors also by installing compass..

Hi,
I have a question.
will Titanium backup of applications and data help to recover all app+data lost during flashing this ROM ?

yes darkangel u can use titanium to restore everything pertaining to your apps

UI Screen Shoot
srinath2912 said:
DISCLAIMER : DON’T BE HASTY “HASTE MAKES WASTE”
TRY AT UR OWN RISK.
I AM NOT RESPONSIBLE FOR BRICKING UR DEVICES,DEAD SD CARDS AND MANY THINGS..
We are not responsible for anything. This ROM has been tested 100% working before being posted here.
ROM of Mobistel Cynus T2
The ROM remains ultimately stock and the partitions will be untouched during the flashing process. The changes are
- 12MP Rear Cam
- 1.3MP Front Cam
- Better Speed in 3G
- Great Sound output than both the stock ROMS (V1 & V2)
- Better adobe flash performance in browsers
- Brighter Flash intensity than V2
- Lesser battery drain compared to bothe the stock ROMS
- Super smooth and Super Stable
- Comes with official Mobistel UI
Antutu Score - 6415
Quadrant Score - 2604
Again reminding everybody about the idea of this ROM. We tested whether MC T2 ROMs will boot on system as Mobistel is lauching its JB update in the first week of JAN. This ROM was so stable and perfect for our device too which ensures no need of port of JB from other devices as it will be readily available for our devices too even before Micromax releases it (if they ever had a idea of that).
Rom Flashing Steps:
First you need to revert to stock recovery as this ROM will not get updated to CWM recovery.
Then copy the ROM in your internal sd card.
Enter stock recovery by pressing (Vol+)+(Vol-)+Power. Then press Vol+ button once the option screen turns up.
Flash the ROM.(No need to wipe cache and Dalvik cache)
Reboot the device.
Go to settings-backup & reset-factory data reset.
No lags found so far. If you find something please post it as comments below.
Once again Thanks for your help and Co-Operation for the testing{ Kishore Kanna}
Mediafire upload credits to Rameez Shaik.
ALL CREDITS GOES TO Kishore Kanna AND Rameez Shaik
MEDIAFIRE LINK : http://www.mediafire.com/?8phwxmo8bqtwm7l
Click to expand...
Click to collapse
Good Work
Please Dont mind
include also UI Screen Shoot

guys m new to mmx a110.kindly tell me can i flash this rom on micromax a110???and i am on stock rom.i think m on v1 stock.so please suggest me.
Sent from my Micromax A110 using xda app-developers app

Looking good surely gonna test it thanks

shivg86 said:
guys m new to mmx a110.kindly tell me can i flash this rom on micromax a110???and i am on stock rom.i think m on v1 stock.so please suggest me.
Sent from my Micromax A110 using xda app-developers app
Click to expand...
Click to collapse
shivg86...its very simple.
1--copy zip file to memory card
2--turn off mobile phone.
3--with mobile in off state, press both volume buttons and power button simultaneously
4..now canvas2 logo will flash...leave those buttons now...then the recovery screen will flash.
Now press volume up button.
5--choose update from sdcard2
6--select the zip file using volume buttons
7--press enter by pressing the menu(square capacitive button)
8---let it reboot
9--you are done, enjoy
10--thank me by pressing thanks...if this short guide helped you.

New screens
Check the screens it has magnetic sensor but doesn't work..
I officially give permission to all developers to use this rom and modify

it will root my phone na ankit???and what is new in this rom.can you please tell.
Sent from my Micromax A110 using xda app-developers app

shivg86 said:
it will root my phone na ankit???and what is new in this rom.can you please tell.
Sent from my Micromax A110 using xda app-developers app
Click to expand...
Click to collapse
No, it will not root your phone..that is very easy to do.

ankitaggarwal001 said:
No, it will not root your phone..that is very easy to do.
Click to expand...
Click to collapse
Hi Ankit,
could you please tell us if there is a magnetic sensor that is enabled by the ROM?

darkangel1016 said:
Hi Ankit,
could you please tell us if there is a magnetic sensor that is enabled by the ROM?
Click to expand...
Click to collapse
yes...if u check for sensors it does detect a sensor but the sensor itself did not detect any magnetic field. either the earth's natural magnetic field or the one i created by using an electromagnet.

BOY!!! I can't wait to have this ROM on MMX A110.
Talented Developers PLEASE.. Make this ROM Flashable via CWM. I am just excited at the prspects.. Custom ROMs with THIS as base!!
Looking forward to having this ROM realigned & redesigned to fit on MMX A110!

alap1983 said:
BOY!!! I can't wait to have this ROM on MMX A110.
Talented Developers PLEASE.. Make this ROM Flashable via CWM. I am just excited at the prspects.. Custom ROMs with THIS as base!!
Looking forward to having this ROM realigned & redesigned to fit on MMX A110!
Click to expand...
Click to collapse
http://d-h.st/YGZ
this is the flashable cwm of this mobistel rom.
Please click on thanks if this helps you.
credits to kishore

Anyone tested this?
---------- Post added at 12:21 AM ---------- Previous post was at 12:17 AM ----------
EDIT: DOWNLOADING
READ :http://www.android-hilfe.de/mobiste...bean-fuer-das-cynus-t1-t2-ab-januar-13-a.html

[ROM][AROMA][JB]MEGAMAX™ A110 ROM SERIES V2[Custom ROM for MICROMAX A110][03-04-2013]

MEGAMAX
Shahul proudly presents you Fisrt custom ROM for Micromax A110 with Aroma Installer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES
All Bloats Removed
Pre-Rooted
Zipalingned
Deodexed
Super user added
Aroma Installer options
5 launchers options
Apex, Nova, Holo, Launcher8, Xperia z
4 Music Players
Stock, Sony walkman, miui, Google Music
3 Video players
Stock, Mx player, Easy Player
3 Browsers
Stock, Opera, Ucbrowser
4 Battery icons
stock, circle, CM, BigAndroid
2 Keyboards
Android 4.2, Xperia T
2 camera and gallery
Stock, Cymera
2 Sound Recorder
Stock, miui
3 fonts to choose
Stock, Rosemary, Ubuntu
OTG Updater
Ad Blocking
More Productive Apps
LMT PIE navigation
Power Options
​
Click to expand...
Click to collapse
Note: Do this at your own risk
PROCEDURE TO FLASH ROM
Install TWRP or CWM Recovery
Wipe cache
Wipe delvik cache
Factory Reset
Install Zip from sd card
Now you get stunning Aroma Installer to customize.
Click install
Again Wipe delvik cache
Fix Permission
Finally Reboot
After Boot Logo wait for 5 min to Boot-up.
Note: Rom is based on Aroma, so there some issue with fix permission. It may stuck at boot logo here is solution given by our warriers
BOND1987 said:
Bro,
Do the below given steps again with CWM recovery and you will not face problem:-
1) wipe data and factory reset.
2) wipe cache partition.
3) wipe dalvik cache(in advanced menu).
4) format cache ( in mount and storage).
5) format data from the same.
6) format system.
If system formating fails then again boot to recovery and just format system.
Now install rom and then wipe dalvik cache and then fix permission. You wont feel problem again.
Do the same as mentioned.
Options are same buddy.
Do try the process then let me know.
If its not booting then restore your previous rom or install any other rom by just go to mount and storage and then plug your phone to pc and then click on the mount usb storage option and then copy any other rom and flash it. Then install the CWM recovery 6.0.1.2 through Mobile uncle tool and you can find recovery img from few post back posted by me' then do the same process.
Hit Thanks Instead of Saying It.....
Click to expand...
Click to collapse
haricharankumar said:
U can use CWM 6.1.0.2. Things that I did to install this Rom:
A. Take a nandroid backup of your existing Rom
B. Wipe Cache
C. Factory Reset
D. Advanced - Wipe Dalvik Cache (Do it thrice. I do it everytime when flashing a new Rom)
E. Flash Megamax V2
F. While inside aroma, I picked up everything stock except for the Xperia Keyboard
G. Take the cyanogen mod battery icon. It's working fine for me
H. Recommend not to install any other additional app from Aroma
I. Once aroma finishes, do not reboot. As told, go to CWM and once again clear Dalvik Cache and Fix Permissions)
No need to do any tinkering with Partitions.
Now reboot. After setting up the new ROM, install ROM Manager and use Fix Permissions within it. This should solve many of your permissions related issues.
Hit thanks if I had helped you.
Cheers
Haricharan
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
apoorv.mehrotra said:
Now the procedure to flash: (CMW Only, TWRP will not work i believe)
1) Wipe every thing (dalvik cache, cache, battery stats etc..etc..) i hope all know what to wipe
2) Follow the aroma or Megamax instructions
3) Select any battery icon except the one giving problem, i selected droid i worked for me
4) In last when the installer asks you to install apps like "Skype, gmail, gtal, faceboo etc...etc..." my advise, do not select any one. Skip that step without selecting and start the installation. You can install all these apps from google play later
5) the installer once complete and will reboot will not take more than 2 - 3 minutes to boot your phone. Or may be even less
6) Once done enjoy.
Click to expand...
Click to collapse
djmaddy said:
Okay sucessfully installed the rom without any glitchtes with following recovery
http://forum.xda-developers.com/showthread.php?t=2204785
Here is procedure which i did:
Wipe data/factory reset
Wipe cache
Wipe dalvik
Format system
Format cache
Install zip
Selected default browser,default music,circle mod,no user apps,default camera,sony xperia keyboard.. Apex launcher...
Dont resart your rom goto recovery again
Wipe cache
Wipe dalvik
Fix permissions
Reboot!
Working like charm! No google gapps message... Smooth as silk
Gr8 rom! Keep up the good work mate
Still testing will let u know if any bugs!
Asta la vista
Click to expand...
Click to collapse
​
Click to expand...
Click to collapse
CREDITS
Amrulz for Aroma Installer
DsiXDA for Android kitchen
Thilanc for Xperia z Launcher Mod
Rizal for Sony Media App Mod
Apoonet for Miui Mods
noname81 for LMT
Micromax for JB ROM v2
Click to expand...
Click to collapse
FEEDBACK
haricharankumar said:
Hi, I've been using this ROM now for more than a week. It's very stable and I have no issues in using it for my daily needs. I'm not a avid gamer. So cannot comment on the gaming performance.
But, I love the interface with Rose Mary and the file manager which is inbuilt with root permissions! The UI is very fluid.
Before this, I've tried my hand at many other popular ROMs. But, never I had used them continuously for more than a couple of days due to some problem or the other including, random reboots, bad Wi-Fi signal, bad battery management etc.
But, this ROM really suits my needs perfectly and is very stable and good looking. And this to me is by far the most good looking and of all the best custom modded ROM for the Canvas 2 that is available as on date. With tweaks added thru Pimp my ROM, it works even better.
Once again, thanks Shahul for giving us this ROM.
Click to expand...
Click to collapse
wrishaba said:
Thank you for your valiant attempts.
Rest every thing works good.
No doubt about it.
Superb rom and good experrience as well as it is typical from other roms.
Particularly the sound effects totally different from the native musif fx.
Enjoying this rom.
Hats off to you my boy.
Wrishaba
Click to expand...
Click to collapse
violin.siva said:
Hey man who are you its just amazing ROM you have made. I have flashed out so many but planned to remain stable in this ROM till u post any updates. Wow my phones features and admiring has totally changed. The font u have made for the ROM is great and a stylish look really no words to praise you man. Thanks a lot for this wonderful ROM.
Sent from my Micromax A110 using xda app-developers app
Click to expand...
Click to collapse
santhosh1110 said:
Nice Rom.
Rom is quite smooth & fast.
Keep up the good work. :good:
Click to expand...
Click to collapse
pankycool123 said:
I have two connection, 1 is postpaid (vodafone) & 2nd is airtel (Prepaid)........ in Postpaid connection network is not coming by default.
after changing V2 stock modem.img both network is coming...............
Rom is quite smooth & fast
initial i got 160 mb free ram.
overall it is good........... thanks.......
Click to expand...
Click to collapse
Click to expand...
Click to collapse
DOWNLOAD LINK
MEGAMAX_A110_ROM_SERIES_V2.0.zip - 454.03 MB​
Click to expand...
Click to collapse
OLD VERSION BELOW
MEGAMAX_A110_JELLYTREAT_V1.0.zip - 313.10 MB
I Really Don't Have Anything, But You Are Free To
Button & Rate This Thread 5 Stars
If you like my work and wish to donate!
​
Click to expand...
Click to collapse

Screenshot
OLD Screenshots
YOU CAN

ADDONS AND FAQ's
After Flashing New ROM, Calibrate your Battery.
FOR THOSE WITH BATTERY PROBLEMS:
1. After flashing your phone with a new ROM, install this software:
BATTERY CALIBRATION on Play Store - 47 KB size
2. Then, charge your phone to 100%.
3. IMPORTANT. Remove CHARGER first.
4. IMMEDIATELY hit "Battery Calibration" (1 or 2 seconds delay is fine, wait for BATTERY voltage to drop and be stable)
5. Use your phone normally (don't charge in between) till it hits 1%.
6. Then charge your phone UNINTERRUPTED (leave it for charging all night) till 100%.
7. Unplug and start using. You should be having as little as 2-3% battery drain for 6-8 hours of IDLING now. That's the optimization of a calibrated battery.
Click to expand...
Click to collapse
OLD Version Addons
1.Network FIX Working Confirmed
Here v2 modem img
Go to System/etc/fiemware and replace modem.img with downloaded img.
Click to expand...
Click to collapse
2.Xperia Launcher Theme Option Removed.
Xperia Z launcher support theme option only in xperia series device. if u click theme option it wil FC.
To fix this issue We can remove Theme option by flashing a theme remove zip file. FIX HERE
Click to expand...
Click to collapse
3.Camera FIX
Flash Zip file from Here. If It works Thank Hp_vercetti .
Here u have some camera images taken by Abhishekkoni.
Click to expand...
Click to collapse

FAQ About Megamax
FAQ's
How to Activate LMT?
Goto App Drawer open LMT. Wait for few second it will ask for super user permission grant it.
Now select start services.Also select Autostart and enable it.
Click to expand...
Click to collapse
Which version this ROM is based on ?
This ROM is based on latest Micromax JB v2
Click to expand...
Click to collapse
Click to expand...
Click to collapse

hi there,
could you please tell me weather this is based on cynus t2 17.01 ?
also, could you please post the screenshot of the dialer ?

darkangel1016 said:
hi there,
could you please tell me weather this is based on cynus t2 17.01 ?
also, could you please post the screenshot of the dialer ?
Click to expand...
Click to collapse
Yes Buddy Its based on Latest Mobistel Cynus t2 17.01.
Dialer Screenshot attached.

looking quite good........

pankycool123 said:
looking quite good........
Click to expand...
Click to collapse
Then give it a try Bro, I expect ur feedback.

can someone give me a mirror link preferably google docs.. other filehosting websites blocked at college..

mirchi said:
can someone give me a mirror link preferably google docs.. other filehosting websites blocked at college..
Click to expand...
Click to collapse
Try this proxy link It may work for you.
http://hidedoor.com/servlet/redirect.srv/syy/sp-n/p1/3Rh

shahulakthar said:
Try this proxy link It may work for you.
http://hidedoor.com/servlet/redirect.srv/syy/sp-n/p1/3Rh
Click to expand...
Click to collapse
Those techniques are all tried...

I am using your ROM, why you are not posting in MMX A110 forum? Request MODs to move your thread to appropriate section. So far I have found that Auto-rotation is not working.
:good:

Re: [ROM][JB]MEGAMAX™ A110 JELLYTREAT V1[Custom ROM for MICROMAX A110][4-03-2013]
Tata Vista said:
I am using your ROM, why you are not posting in MMX A110 forum? Request MODs to move your thread to appropriate section. So far I have found that Auto-rotation is not working.
:good:
Click to expand...
Click to collapse
Really I don't know about a110 forum.
link please.
You mean auto rotation for xperia z launcher. If so I provide auto rotation in add on.
Sent from my Micromax A110 using xda app-developers app

shahulakthar said:
Really I don't know about a110 forum.
link please.
You mean auto rotation for xperia z launcher. If so I provide auto rotation in add on.
Sent from my Micromax A110 using xda app-developers app
Click to expand...
Click to collapse
Micromax A110 forum ---> http://forum.xda-developers.com/forumdisplay.php?f=2142

shahulakthar said:
Then give it a try Bro, I expect ur feedback.
Click to expand...
Click to collapse
downloading.........

just flashed your rom, but network is not coming. i think yu have not change the modem.img file from stock v2 ?????

review
all is working fine.. just a little wifi issue seems to be there. ram free i ve got 145 after restarting without any extra apps installed which is a bit on lower side
overall it is a good one:good:

pankycool123 said:
just flashed your rom, but network is not coming. i think yu have not change the modem.img file from stock v2 ?????
Click to expand...
Click to collapse
Oh i didn't change modem.img. I don't have any issue in network. Now I check this details at a110 discussion thread and come with possible solution.
If u know what to do u can share.

Modem.img Ready
Now i created flashable zip with modem img
flash it using cwm.
Zip file attached.

???
shahulakthar said:
Click to expand...
Click to collapse
wer is dis option???

[NEW] Download Official JB/Cynus T2 for MMX A110 CWM+Sptool flash (29/07/2013)

Here is some good news for MMX A110 user Micromax Decided to introduce New ROM for MMX A110 roomers says it is 4.2os
Hello Friends here is the link to Download Official JB for Micromax A110 Original+CWM
:good::good:New Original Official Micromax A110 Sp-tool flash file for JB v1.11 :good::good:
Dev-host Link sheared by sheshuvadrevu
Dev-host Link Official Stock Rom JB V1.10
###############-C-W-M-################
@ Untouched <Rooted> MMX A110 JB V1.11 CWM
@ Untouched <Rooted> MMX A110 JB V1.10 CWM
@ Cynus T2 Stock JellyBean V17.01 <Rooted>
Installation(FOR CWM):
1. Download Any Stock JellyBean Zip from link above.
2. Move it to your sd card
3. Go to cwm recovery
4. Install zip from sd card
5.Wipe data
6. Wipe cache
7. Wipe dalvik cache
8. Reboot
9. Follow setup procedure.
10. Reboot , enjoy
ALL Credits Of cwm Paplu3 Go to thread
######################################
official Link
ftp://sts.micromaxinfo.com:22/mxliv...o Jelly Bean/S9081_MP_F4.1_B1_IN_MMX_1.10.rar
Due to password change of official ftp please download that file from here. http://d-h.st/EOB
>>>
Software release notes:Software release notes MMX A110 V3 1.11
1. Operating system is upgraded from ICS to Jelly bean.
2. M! Store is removed.
3. New wallpapers are integrated.
4. Software is backward compatible with old TP available(BYD Make).
5. Power on animation is changed.
Hardware release notes:
1.TP is changed from BYD to BAOMING.
Software release notes MMX A110 V3 1.10:
1.Operating system is upgraded from ICS to Jelly bean.
2.M! Store is removed.
3.New wallpapers are integrated.
4.Software is backward compatible with old TP available(BYD Make).
5.No TV out
Here is Tutorial Flashing official ROM with SP-tools
Rom Based on Official JB
1)JMP™ v8.0 ROM Jelly Bean 4.1.1 Micromax A110 By Jigar
2) MMXZJB™ V2 Custom Rom By kumar abhishek
Note:with this ROM autorotation working for paki user qnor mobile
Sent from my MMX A110 using xda premium

sanz_khan said:
Hello friends here is the link to
download Official JB for Micromax A110 sheared by senior member sheshuvadrevu
http://d-h.st/EOB
Sent from my MMX A110 using xda premium
Click to expand...
Click to collapse
LOL
"sheared??"
Thanks by the way..
I hope this is not the correction section to post this...!

Re: Official JB for MMX A110 (13/03/2013)
Screen shots are too small to see plz upload again on some good image hosting site.
Sent from my GT-I9300 using Xparent Red Tapatalk 2

someone uplode the wallpapers and systemui.apk .:highfive:

Re: Official JB for MMX A110 (13/03/2013)
viijay4b7 said:
LOL
"sheared??"
Thanks by the way..
I hope this is not the correction section to post this...!
Click to expand...
Click to collapse
Ss are very small. Upload again
Sent from my GT-I9300

Re: Official JB for MMX A110 (13/03/2013)
hey bro can you plz make a flashable zip of this update please bro.
hope u understand.
Please.
Sent from my GT-I9300 using xda premium

sohamraut said:
hey bro can you plz make a flashable zip of this update please bro.
hope u understand.
Please.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Here is it.. flash this on any rooted jb rom with cwm..and enjoy
http://www.facebook.com/l.php?u=http://www.mediafire.com/download.php?xkpq2jev5sae883&h=MAQFf_mrK
Credits: mmxa110user
---------- Post added at 07:51 PM ---------- Previous post was at 07:50 PM ----------
Check this post for screen shots...
http://forum.xda-developers.com/showthread.php?t=1960080&page=653

Re: Official JB for MMX A110 (13/03/2013)
viijay4b7 said:
Here is it.. flash this on any rooted jb rom with cwm..and enjoy
http://www.facebook.com/l.php?u=http://www.mediafire.com/download.php?xkpq2jev5sae883&h=MAQFf_mrK
Credits: mmxa110user
---------- Post added at 07:51 PM ---------- Previous post was at 07:50 PM ----------
Check this post for screen shots...
http://forum.xda-developers.com/showthread.php?t=1960080&page=653
Click to expand...
Click to collapse
Lol.. why are you giving kernel ??
Sent from my GT-I9300

Re: Official JB for MMX A110 (13/03/2013)
wat wil hap with this.
i waant jb official rom.
plz help bro.
Sent from my GT-I9300 using xda premium

Re: Official JB for MMX A110 (13/03/2013)
Nice
Sent from my Cynus T2 using Tapatalk 2

Re: Official JB for MMX A110 (13/03/2013)
Dibbyo123 said:
Lol.. why are you giving kernel ??
Sent from my GT-I9300
Click to expand...
Click to collapse
I expected WiFi improvements in the official kernel build!! for everythng else cynus t2 is so perfect! ... Thats y flashed kernel alone
Sent from my Micromax A110

Request...
Dialer Screenshot Please....

Is this an official Micromax Jellybean rom?
and if yes then it would be grt if flashing procedure are posted
thanks

is the rooting method same as that of cynus t2 ?

darkangel1016 said:
is the rooting method same as that of cynus t2 ?
Click to expand...
Click to collapse
Yes. Flash CWM and flash SuperSU 1.25 zip. Already done with it. Removed all bloatware in titanium backup pro and everything is smooth.

sanz_khan said:
/COLOR]
Sent from my MMX A110 using xda premium
Click to expand...
Click to collapse
Please remove those password and login details...Don't give those details openly pm if required.
Micromax has already ask to remove from public sites..
This may create problem as we cant access there site if they take any action..

Re: Official JB for MMX A110 (13/03/2013)
Borsutkar said:
Please remove those password and login details...Don't give those details openly pm if required.
Micromax has already ask to remove from public sites..
This may create problem as we cant access there site if they take any action..
Click to expand...
Click to collapse
Edited u also remove quoted
Sent from my GT-I9300 using xda premium

Re: Official JB for MMX A110 (13/03/2013)
Official ROM Same as cynus T2 no big difference is there and also no TV out
.I think autorotation work with Qnor pak v
Jigar moded that official ROM and releasing soon as JMP V8.0 series
Sent from my GT-I9300 using xda premium

finally
thank god finally we got it.........

Re: Download Official JB for MMX A110 CWM added(14/03/2013)
Want to use multi window in our MMX A110 here is the solution download multiscreen multitasking THD use given apps with multi window
Sent from my GT-I9300 using xda premium

JMP v10

hii guys.. I want to flash jmpv10... but as jigar said before flashing jmpv10 we should on Micromax stock JB...! now I m on stock rom v2 ( ics 4.0.4).. can I flash jmpv10 on stock rom v2... or need to flash mmx JB??? help me

Pranesh Desai said:
hii guys.. I want to flash jmpv10... but as jigar said before flashing jmpv10 we should on Micromax stock JB...! now I m on stock rom v2 ( ics 4.0.4).. can I flash jmpv10 on stock rom v2... or need to flash mmx JB??? help me
Click to expand...
Click to collapse
u can flash it bro.. dnt wry go head

Rakesh251 said:
u can flash it bro.. dnt wry go head
Click to expand...
Click to collapse
no buddy u need to be on stock jb so plz first flash stock jb through sp flash tool, then flash jmp v10

No dude just go ahead .no needs of so flash tool. I did it directly. no problem facing....
best of luck.
don't forget to hit thanxxxx

skdmech94 said:
No dude just go ahead .no needs of so flash tool. I did it directly. no problem facing....
best of luck.
don't forget to hit thanxxxx
Click to expand...
Click to collapse
Yes you are right no need to flash job rom first. But I don't personally feel to move to some new rom instead of original firmware just for some tweaks when could easy found in xda. You can get same or even more performance using official stock rom. This I am saying from lots of search over Google.
Sent from my Micromax A110 using xda app-developers app

Thanx for reply

hi Jigar,
I hv MMX a110.apparently I had flashed Cynus T2JB cwmV17.01 and has been working very well.
now yday installed JMP-V10 rom. it has been installed well except below:
- the shortcut icons (only for the apps on the sd card) cannot stay on the desktops after phone reboot.
- no notifications on the shortcut icons for new emails and new smss. but the ribbon does show the notifications.
if someone can help to fix these issues. pls do ask if u want anymore info.
thanks- Chetan
Sent from my Samsung GT-S9081 using xda app-developers app

chetanpsp said:
hi Jigar,
I hv MMX a110.apparently I had flashed Cynus T2JB cwmV17.01 and has been working very well.
now yday installed JMP-V10 rom. it has been installed well except below:
- the shortcut icons (only for the apps on the sd card) cannot stay on the desktops after phone reboot.
- no notifications on the shortcut icons for new emails and new smss. but the ribbon does show the notifications.
if someone can help to fix these issues. pls do ask if u want anymore info.
thanks- Chetan
Sent from my Samsung GT-S9081 using xda app-developers app
Click to expand...
Click to collapse
issues like this can happen, hence it is advisable to first flash the stock mmx jb (preferably via sp tool) then flash any custom rom
also all the benifits of jmp 10 like better fps is only available when your refresh rate is 60 hertz which can be done only by flashing official mmx jb rom through sp flash tool

mohit141785 said:
issues like this can happen, hence it is advisable to first flash the stock mmx jb (preferably via sp tool) then flash any custom rom
also all the benifits of jmp 10 like better fps is only available when your refresh rate is 60 hertz which can be done only by flashing official mmx jb rom through sp flash tool
Click to expand...
Click to collapse
FULLY AGREED
Sent from my Micromax A110

[[ZhaoBlastJB]] First Ever Jelly Bean Custom ROM for Micromax A90s and BLU Vivo 4.3

Presents you Modified First Ever Jelly Bean Custom ROM for Micromax a90s and BLU Vivo 4.3
Click to expand...
Click to collapse
ZhaoBlastJB v1.1
Click to expand...
Click to collapse
Change Logs
Click to expand...
Click to collapse
BASED ON Official BLU Vivo(D910i) JB 4.1.1 v7
zipalign all apps
De-Odexed apps and Framework
Added Data/Apps Functionality in ROM
Added Latest Chainfire SuperSU
Added Nano+Syro Text Editor (Developing Tools)
Added Bash Shell
Removed Annoying Boot Sound
Added Samsung Galaxy S4 Touch Wiz 5.0 with 100% transparency
Added Samsung Galaxy S4 Weather Widget
Most Advance Features is Online Theme Support in this Updates ( Big Thanx to Shailu i ll use their Modified Build.prop )
Init.d supported
Init.d tweaks for battery savings and overall performance
Build.prop tweaks added
LCD Density set to 230 u can change it as per u r wish by editing build.prop
now no more ADB icons in Statusbar shht gooo
Added HC Audio Soung Engine + Sony Sound Enhancements ……
Now Music is FUN J u guys feel it I’ll sure about it
Added Sony Walkman
Add Sony Album :- View and share your moments in High Clarity
Add Sony Bravia 2+ Bravia 3 Patch for Better Image & Graphic Views
Solved GPS Bugs itself
This time All Gaps there nothing removed
like Google now , Gmaps,Gmail etc...all there
Don’t Remember any other changes
Click to expand...
Click to collapse
Requirements
If u already in Older ZhaoBlastJB then only CWM or TWRP require otherwise u must flash first BLU Vivo Firmware before go ahead
SPFT Firmware of Blu Vivo 4.3 here its must needed........ if u not already flash it cuz otherwise ROM not booted up
Click to expand...
Click to collapse
How to Flash ROM
Wipe Data/Factory reset
Wipe Cache
Mount & Storage Menu ..n format these
Format Data
Format System
Format Cache
Now go In Advance Menu and Wipe Delvik Cache
Now Go Back in Main Menu and
Choose Zip From SD Card
Wait for Installtion finish
Reboot
After that Boot logo appears wait some minutes, it will take more time for first boot for deodexed Rom.
Click to expand...
Click to collapse
Bugs :-
Apps Header not shown clearly last line is having this Problem for that after flash ROM do not restart your device must flash fixes mod first then reboot device finally
Other Bugs Find it for me
Click to expand...
Click to collapse
SCREENSHOTS OF New Version
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download New Version From Here
Click to expand...
Click to collapse
Apps Header Crashed fixed MODS with Performance Tweaks and Online Theme Support
Download it from HERE
Click to expand...
Click to collapse
Credits :-
Click to expand...
Click to collapse
All BLU Team for JB Specially lopestom Who Provide Stock BLU Vivo 4.3 JB firmware to US
DsiXDA for Android kitchen
Xperia Z Developers
Micromax
All XDA Members & Devs
Samsung Devs Specially for TW 5 & S4 Weather Widgets
So say big Thanks to Him not me
Click to expand...
Click to collapse
ZhaoBlastJB
Click to expand...
Click to collapse
Some Features of OLD ROM
Click to expand...
Click to collapse
BASE on JB 4.1.1
Removed unused system apps
zipalign all apps
De-Odexed apps and Framework
Added Data/Apps Functionality in ROM
Added Latest Chainfire SuperSU
Added Nano+Spyro Tools
Added Bash Shell
Removed Annoying Boot Sound
Init.d supported
Init.d tweaks for battery savings and overall performance
Build.prop tweaks added
LCD Density set to 250 for better Graphical View in your A90s or BLU Vivo 4.3 with XZ Home
now no more ADB icons in Statusbar shht gooo
Modified Statusbar to Canvas3D
Micromax Canvas3D Boot & Shut Animations added
New Customized Settings Styles
Add Sony Walkman with Enhancements
Add Sony Album :- View and share your moments in High Clarity
Add Sony Bravia 2+ Bravia 3 Patch for Better Image & Graphic Views
Added Gaming Tweaks : Gaming Performance is Improved
Solved GPS Bugs itself now u locked in a seconds
Removed GAPS for better and smoother performances
( Only GTalk and Playstore remain )
dont remember any other changes
Click to expand...
Click to collapse
Requirements
First Flash SPFT Firmware of Blu Vivo 4.3 here its must needed........ otherwise ROM not bootup
Click to expand...
Click to collapse
[/SIZE]
[/QUOTE]
SCREENSHOTS OF Old Version
Click to expand...
Click to collapse
Download OLD ROM from Here
Click to expand...
Click to collapse

Reverse for MODS and Changes
Thanks
Hardy

Reverse for Bugs and Fixes
Edit :- New TWRP & CWM posted as per many user request cuz old Recovery not compatible with JB OS
Click to expand...
Click to collapse
Working New CWM and TWRP with JB ROM
Click to expand...
Click to collapse
Download it from here
Click to expand...
Click to collapse

How's the battery life compared to stock rom?
Sent from my A90S using xda app-developers app

Super Smooth First Jellybean
The ROM is super smooth.
Cam :]Working
Wifi:Working
GPS :Yet To check
THIS ROM SUPPORTS USB FAST CHARGE. NOW YOU SHOULD BE ABLE TO CHARGE YOUR PHONE FROM PC WITH SAME SPEED THAT OF WALL CHARGER
Battery Backup on MA Daily use : Yet to check.+
EDIT: Acid Mod v8 + awsome beats works like charm in this ROM..
Suggestions
Replace the both file manager with ES FILE Explorer V3.0 http://forum.xda-developers.com/showthread.php?t=2210417 (I will try To make patch for this)

avishekrc said:
How's the battery life compared to stock rom?
Sent from my A90S using xda app-developers app
Click to expand...
Click to collapse
well for me its 1 day or plus basically its depends on your uses of your device
still i say everything is better then stock JB i guess
also try your self and give me your feedback its appreciated to me and my work
Thanks
Hardy

BHARDIK said:
Presents you Modified First Ever Jelly Bean Custom ROM for Micromax a90s and BLU Vivo 4.3
Click to expand...
Click to collapse
Thanks for this.:good::good:
Now many users mmx and BLU have option to have a ROM with improvements..:laugh::laugh:
These weeks will be busy, however, I will certainly put this great ROM.
Still waiting for work Shahul ........

Is there any way we can use it for mmx a90
Sent from my A90 using xda app-developers app

vipul921 said:
Is there any way we can use it for mmx a90
Sent from my A90 using xda app-developers app
Click to expand...
Click to collapse
Hardware is different. Not possible

OP Added Working CWM & TWRP for JB ROM also Gaps + FB Home Mods for JB ROM plz check mods and Fixes
Gpas + FB Home is also worked in ICS ROM too in any Device try it and let me know
Click to expand...
Click to collapse
Press Thanks if i'll be Helpful
Thanks
Hardy

lopestom said:
Thanks for this.:good::good:
Now many users mmx and BLU have option to have a ROM with improvements..:laugh::laugh:
These weeks will be busy, however, I will certainly put this great ROM.
Still waiting for work Shahul ........
Click to expand...
Click to collapse
He is best compared to me me also waiting for his Work still i try my best to provides to you guys something better
Thanks
Hardy

A90S struck at boot logo.
was on shahulakthar's megamax V1 rom,
CWM v6.0.1.2
Wanted to install your rom, but mistakenly downloaded the beta version of it and installed and it worked. After I realized that it was beta, I downloaded the correct version and installed. Now its struck at boot logo.
Now I went back to megamax.
So... what did I do wrong here and how can I fix it???
Please help. Thanks.

hotbaggy said:
was on shahulakthar's megamax V1 rom,
CWM v6.0.1.2
Wanted to install your rom, but mistakenly downloaded the beta version of it and installed and it worked. After I realized that it was beta, I downloaded the correct version and installed. Now its struck at boot logo.
Now I went back to megamax.
So... what did I do wrong here and how can I fix it???
Please help. Thanks.
Click to expand...
Click to collapse
not understand what u mean beta version there r no Beta version of JB rom ..... btwn u have to flash first BLU vivo firmware before installing this ROM otherwise its want bot check first post of this threads
check what is requirements .... threads
Sent from my VIVO 4.3 using xda premium

BHARDIK said:
not understand what u mean beta version there r no Beta version of JB rom ..... btwn u have to flash first BLU vivo firmware before installing this ROM otherwise its want bot check first post of this threads
check what is requirements .... threads
Sent from my VIVO 4.3 using xda premium
Click to expand...
Click to collapse
OOPS.... I'm so sorry man, ignore my earlier post. Out of utter excitement I totally missed the requirement part. . will do it later tonight.
But I have to say, the blu vivo 4.3 is quite confusing dude... should we backup IMEI???

I think due to this update of JB everyone had forgot your zhaolight V5 ICS update but still i wanna give review about dat,perhaps we are now on JB I wanna give you Salute for your BEST ROM TILL DATE ZHAOLIGHT V5. Its incredibly awesome bro. When I first installed it just make me feel like am on JB you have done a brilliantly good job regarding this ROM. I am again planning to switch back to your old ROM coz its totally bug free n gaming n other things were awsome in it. Now coming to this rom i dont know y but whenever i reboot to system it lag on the bootscreen n slow as compare to Stock JB. Walkman sometimes doesnt work at all and I liked the feature of Google Now but you have removed it so i have to installed it again but its not a big concern. Finally i wanna say that i vl stick to your ZhaoLightV5 untill I got a better update on JB. Thanks for your hard work and I know Its not an easy task to make such ROM's.

Shivam Bhalla said:
I think due to this update of JB everyone had forgot your zhaolight V5 ICS update but still i wanna give review about dat,perhaps we are now on JB I wanna give you Salute for your BEST ROM TILL DATE ZHAOLIGHT V5. Its incredibly awesome bro. When I first installed it just make me feel like am on JB you have done a brilliantly good job regarding this ROM. I am again planning to switch back to your old ROM coz its totally bug free n gaming n other things were awsome in it. Now coming to this rom i dont know y but whenever i reboot to system it lag on the bootscreen n slow as compare to Stock JB. Walkman sometimes doesnt work at all and I liked the feature of Google Now but you have removed it so i have to installed it again but its not a big concern. Finally i wanna say that i vl stick to your ZhaoLightV5 untill I got a better update on JB. Thanks for your hard work and I know Its not an easy task to make such ROM's.
Click to expand...
Click to collapse
thank you for your review its really appreciated to my work .... btwn walkman and thay reatart thing is not happen to me .... i have to say something on this
first reboot on recovery
now go on mount & storage
now format these one by one
format data
format system
format cache
go advanve menu wipe delvik cache
now flash rom again and reboot u never face any problem like u said
Thanks
Hardy
Sent from my VIVO 4.3 using xda premium

Ok i vl do as u said.
---------- Post added at 04:54 PM ---------- Previous post was at 04:06 PM ----------
BHARDIK said:
thank you for your review its really appreciated to my work .... btwn walkman and thay reatart thing is not happen to me .... i have to say something on this
first reboot on recovery
now go on mount & storage
now format these one by one
format data
format system
format cache
go advanve menu wipe delvik cache
now flash rom again and reboot u never face any problem like u said
Thanks
Hardy
Sent from my VIVO 4.3 using xda premium
Click to expand...
Click to collapse
Did the same as u have told but bootscreen is still laggy n now when i try to change wallpaper it reports "unfortunately 3d stereo wallpaper has stoped." Plz look into this n rest everything is smooth.

should we root blu???
Hi hardy,
After flashing Firmware of Blu Vivo 4.3, should i root it before flashing ZhaoBlastJB ???
forgive if i asked a very basic question.

hotbaggy said:
Hi hardy,
After flashing Firmware of Blu Vivo 4.3, should i root it before flashing ZhaoBlastJB ???
forgive if i asked a very basic question.
Click to expand...
Click to collapse
no need to root just copy rom in sd and follow instruction
Sent from my VIVO 4.3 using xda premium

BHARDIK said:
no need to root just copy rom in sd and follow instruction
Sent from my VIVO 4.3 using xda premium
Click to expand...
Click to collapse
I am having stock unrooted ICS v 4.0.4.I haven't rooted ever. Please can you let me know the steps. I dont think CWM is also available in the stock rom. Can I install Bluevivo without rooting or without using CWM.