[solved] need this file Urgent,Please Help - HTC Butterfly

Hello,
Did anyone have the following link zip file but without crc error??
http://forum.xda-developers.com/showthread.php?t=2157029
I have download 10 times , still have error, and can't use the zip fix to repair it:crying:
I need this file to repair me half bricked HTL21
(My device was a DELUXE_UB1 PVT SHIP S-OFF)
I need the radio and hboot in the zip file....
I already try to flash a japan RUU , but it just reboot after the RUU installed.......
and I found this file have the radio what at the beginning install in this device.....
Thank you

The ZIP is working. You don't have to extract it. Follow these instructions...
kokkein said:
Not sure whether the file can be converted to exe file or not. The following steps are how I did it.
1) Download the file. (PL99IMG_DLXB1_U_JB_45_hTC_Asia_WWE_1.12.707.1_R_Radio_3A.22.306.10_10.07.1060.04D_release_signed.zip)
2) Rename the file to PL99IMG.zip
3) Copy PL99IMG.zip to root directory of external SD Card
4) Insert the SD Card into HTC Butterfly
5) Boot in HBoot and just follow instructions.
P/S : I relock my phone before flashing the zip file.
Click to expand...
Click to collapse
or if you don't have a microSD, flash it using a PC (need adb, drivers, etc.). Rename the ZIP first to PL99IMG.zip
4.4.2 With a PC, via fastboot USB
You will need sdk & and drivers, please take a look here. If you already have it, continue.
Reboot to bootloader by Holding Vol down + Power button
Connect your phone to the PC while in the bootloader. The phone should say fastboot USB, if not, select fastboot on the phone & check if it says fastboot USB, if not, change the USB port you are using.
Navigate to the platform tools folder located inside android-sdk folder
Copy the PL99IMG.zip file from step 4.1 to this folder
Hold down shift and right-click anywhere in the empty space inside the window.
Enter the following command
Code:
fastboot erase cache
You may not see any output, then enter the command
Code:
fastboot oem rebootRUU
You phone will now go into the RUU mode.
Wait for around 30 seconds, then enter the command
Code:
fastboot flash zip PL99IMG.zip
The installation will begin and you will be able to see the progress at every step.
Once done, enter the command
Code:
fastboot reboot
If you experience a boot loop, repeat 4.4.2 again.
Click to expand...
Click to collapse
More info (error codes, etc) http://forum.xda-developers.com/showthread.php?t=1672425

MY device was a HTL21 HTC J buttery , but not come with the original bootloader
It was deluxe UB1 not Deluxe J, and flashed a TW ported rom
So. if I flash a japan RUU , it is ok, but then I will reboot again & again...(This is also the reason that I get into the trouble , beause I flash a japan RUU)
If I flash a TW RUU then It say it is not for this model & stop.
If I flash a custom TW rom, then it can start the system, for 1 min then it will force close and reboot.
So, I think if I flash the radio.img or maybe also the hboot, then flash the TW ported rom than It should work.
But I can't flash a TW RUU, I must flash the radio and hboot in fastboot, so I need to unzip the file .........
I think the problem because I have a japan radio (may be also the hboot)
I already bring the device to the shop for repair, but I'm not sure they can fix it.
Anyway, thanks
WPMan said:
The ZIP is working. You don't have to extract it. Follow these instructions...
or if you don't have a microSD, flash it using a PC (need adb, drivers, etc.). Rename the ZIP first to PL99IMG.zip
More info (error codes, etc) http://forum.xda-developers.com/showthread.php?t=1672425
Click to expand...
Click to collapse

Related

[Q]

Hi
Im new.
I install this rom but i don't have s-off only unlocky by htc-dev
my hboot is 2.00.2
Please help in easy steps beceasue i reed few links but not understend what shud i do
I don't understand
Sent from my SGH-I747 using xda app-developers app
Tankshell said:
I don't understand
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Hi.
I unlock phon by HTCDEV website, then I install CM recovery and install root. I i want to install new rom Sabsa Prime v12.0.
But i don't know that i don't have S-OFF. I still have S-ON and after flash my phon freez on start. I have only Hboot and recovery
HTCdev unlocked = you need to flash boot.img manually.
Unzip the boot.img from sabsa archive then:
fastboot flash boot boot.img
If you don't understand what I mean, search the forum, there are many thread about that.
Tapatalké depuis mon Desire S
U must use aahk
Sent from my HTC Desire HD using Tapatalk 2
Elokwentnyemu said:
Hi
Im new.
I install this rom but i don't have s-off only unlocky by htc-dev
my hboot is 2.00.2
Please help in easy steps beceasue i reed few links but not understend what shud i do
Click to expand...
Click to collapse
I advise you to first read the various forum first. I am not responsible if you messed up with your phone..READ,READ,READ,READ then ACT...
I have referred the following links to root my HTC Desire S .
http://forum.xda-developers.com/showthread.php?t=1525100
http://forum.xda-developers.com/showthread.php?t=1146601
Following are the points which will help you to root your phone..
For S-ON phone only
1. Unlock your bootloader via HTCdev
2. Flash a recovery (Clockworkmod or 4ext)
3. Install Superuser through recovery and test root access. Superuser is a application which requires to root you phone. Search the various forum you will get the Superuser zip file. Copy this file on you SD card
- Activate USB debugging (Settings > Developer options) and connect your phone to the computer (charge only)
- Start menu > Run > cmd
- Go into C:/Android
- Type adb.exe shell and press Enter - You obtain $, meaning you're connected to your device.
- Type su and press Enter - You obtain #, meaning that you got root access !
4. Install the Custom ROM file through Recovery ( Copy the ROM zip to your SD card first)
5. Go to the Boot loader (Volume down (Hold down) and power button) …please do no reboot your phone or you will face the problem of BOOT LAP . You can use C:\Android>adb reboot bootloader to come out from the boot lap.
6. Go to the Command prompt and flash the boot.img manually (You will get the Boot.img file from the ROM zip file. Extract the zip file and copy the Boot.img file where you copied the Fastboot and adb file on your computer. In my case its C:\Android>fastboot flash boot boot.img
If you are on S-ON step no 6 needs to done every time post flashing the Custom ROM. Its must. Remember this or your phone will get stuck in bootlap
7. Reboot the phone
Enjoy...
Things to be done before
1) Turn off the Fastboot from Settings>Power
2) Activate USB debugging (Settings > Developper options) and connect your phone to the computer (charge only)
3) Install HTC sync on your PC and then uninstall as we required only HTC drivers
4) Copy Superuser zip file, ROM zip file in SD card before you start
5) And finally Battery should be fully charge

[Guide] How to Flash The Downloaded OTA File [ HTC One Mini 4.2.2 to 4.3]

Greeting from Vietnam, and sorry for my English
So, you dont want to wait the official-update from your carier/country, you got the OTA file from somewhere else, i'm gonna show you how to flash it, step by step with some stricks
This might works with other phones (I think), but in this guide we'll doing stuffs with HTC One Mini Android 4.2.2, flashing 4.3 OTA file
Before you do anything, i suggest you should do a nandroid backup, so you can get back your official rom any time. This is very important, please google for it
(For those who dont know: to do this, you'll need Unlock bootloader, then installing a custom recovery, i recommend TWRP instead of CWM, i've got error with cwm once -> Get into Recovery Mode -> Backup -> Save it to your computer)
I've googled and tried some other ways to upgrade the phone, but it was not work, like:
http://forum.xda-developers.com/showthread.php?t=2573479
Flash another 4.2.2 ROM -> [Settings > About > Software update] -> Download (only) the OTA file -> Flash the stock recovery file -> Then the phone will alert "the update is downloaded and ready"
Click to expand...
Click to collapse
Well, that's the idea. But right after your download is done (in your phone), it turns out error: "Variant system version", saying your phone has been modified, and end up by delete the OTA file
Let's get started
1. Requirement, Your phone must be:
Disabled Fast Boot:
Settings > Power > Untick Fast boot
Click to expand...
Click to collapse
Enabled USB Debugging:
Settings -> Developer Options -> USB Debugging
If you do not see "Developer Options", Go to Settings > About phone > Software > More > click on build number 7 times. This should enable that section
Click to expand...
Click to collapse
Unlocked Bootloader
Got the S-Off (For HTC phones, to: be able to write to /system)
Installed a custom recovery (recommend TWRP)
The guide can be found at here: http://forum.xda-developers.com/showthread.php?t=2365506
2. Download the OTA file
You can use any OTA files, like the EU, the international,...
For HTC One mini, 4.3 OTA file can use this: OTA_M4_UL_JB43_SENSE55_MR_HTC_Europe_2.12.401.1-1.32.401.2_release_342200vz5jcl35ysxswchv.zip by http://forum.xda-developers.com/showpost.php?p=48404636&postcount=1
3. Flash the firmware
Extract the OTA file you'll get firmware.zip
Make sure you already got the fastboot.exe, adb.exe, AdbWinApi.dll, ... files -> Move all these files + the firmware, the OTA file into a folder like: D:\htc
Reboot your phone into Fastboot USB Mode
Power off > Hold the both Volume Down key + Power key several seconds > Fast Boot
(Use the Volume key to change the selection, the Power key to chose/enter)
Click to expand...
Click to collapse
Make sure your phone is recognized by fastboot and adb, to check:
fastboot devices
- and:
adb devices
Click to expand...
Click to collapse
In case you got error "Device not found" with adb: turn the phone into Recovery Mode, it will fix this, so you can do adb push, shell...
Relock the bootloader, so we can flash the firmware update:
fastboot oem lock
The phone will reboot
Click to expand...
Click to collapse
Reboot to OEM update mode:
adb reboot oem-78
The phone will show the white-text HTC
Click to expand...
Click to collapse
Flash the firmware.zip:
fastboot flash zip firmware.zip
You'll see a green progressbar on the screen, if not: do the command again
Click to expand...
Click to collapse
Unlock Bootloader from http://htcdev.com, install the TWRP Recovery again
fastboot flash unlocktoken Unlock_Code.bin
fastboot flash recovery Twrp-2.6.0.0.img
You might need to get the new Unlock_Code.bin from htcdev
Click to expand...
Click to collapse
Now your phone is wiped, the /sdcard/ folder is empty
4. Make the OTA Flash-able file
Download the sample.zip file at here, we'll rename it to: OTA-4.3.zip, see How to make a flashable zip at here: http://forum.xda-developers.com/showthread.php?t=2163974
Open OTA-4.3.zip with winrar or 7zip, you'll see 2 folders: META-INF/ and system/ . We're going to put data from the OTA file into this zip file (Notice that the system/ folder is empty)
From the extracted OTA file that you've downloaded (OTA_M4_UL_JB43_SENSE55_MR_HTC_Europe_2.12.401.1-1.32.401.2_release_342200vz5jcl35ysxswchv.zip) copy 2 folders: system/ and patch/ into OTA-4.3.zip, just drag and drop them to opened OTA-4.3.zip (by winrar), hit OK in the winrar popup
--> You might wonder why we're doing this: Why we put 2 folders from OTA_M4_UL_JB43_SENSE55_MR_HTC_Europe_2.12.401.1-1.32.401.2_release_342200vz5jcl35ysxswchv.zip to the new, almost empty OTA-4.3.zip; instead of delete all other files, folders from OTA_M4_UL_JB43_SENSE55_MR_HTC_Europe_2.12.401.1-1.32.401.2_release_342200vz5jcl35ysxswchv.zip
--> The anwser is: i have no idea, the second way just doesn't work, i tried
5. Flash the OTA Flash-able file
Copy the OTA Flash-able file (OTA-4.3.zip) into your phone, your phone can not boot up now, so we'll use adb push command
adb push OTA-4.3.zip /sdcard/
It may takes few minutes
Click to expand...
Click to collapse
Now simply Install Zip from recovery:
Boot into Recovery Mode > Install Zip > select OTA-4.3.zip
Click to expand...
Click to collapse
Reboot the phone, if everything goes well, it's showing a progressbar of the Apps installing
You're now in 4.3
Thank you for this information but unfortunately it didnt work for me.
windovv said:
You'll see a green progressbar on the screen, if not: do the command again
Click to expand...
Click to collapse
I do see the green progress bar and it moves to the right but....
the Fastboot/DOS window finishes the flash firmware command successfully but the green progress bar shown on the phone does not go to the very end.....
so at this point I reboot back to fastboot on the phone and then unlock the bootloader then follow the rest of your instructions....
Everything appears to be successful but when i boot the phone it displays the boot animation to the end then just stays there....The phone never goes past the boot animation
Ive managed to restore a backup so thats not a problem but im really struggling to install the 4.3 and sense 5.5 update using the other method shown at the beginning of your post and your method here
anyhow, looks my radio, HBOOT etc is updated now ive flashed the "firmware.zip" from my OTA
Sirius-C said:
Thank you for this information but unfortunately it didnt work for me.
I do see the green progress bar and it moves to the right but....
the Fastboot/DOS window finishes the flash firmware command successfully but the green progress bar shown on the phone does not go to the very end.....
Click to expand...
Click to collapse
I think this step is just fine, i've noticed that the progress bar was near to the end, not full of the bar. If you not sure about this, you can do this step (run this command) twice:
fastboot flash zip firmware.zip
You'll see a green progressbar on the screen, if not: do the command again
Click to expand...
Click to collapse
Everything appears to be successful but when i boot the phone it displays the boot animation to the end then just stays there....The phone never goes past the boot animation
Click to expand...
Click to collapse
It seems like you have just flashed the firmware.zip only, the rest of the OTA file has not been flashed successfully yet. The phone is now wiped, so it can't boot up
Reboot the phone, if everything goes well, it's showing a progressbar of the Apps installing
Click to expand...
Click to collapse
Notice that in some cases, there's no progressbar showing, but the phone still configuring itself, and it can takes about 5-10 miniutes
so at this point I reboot back to fastboot on the phone and then unlock the bootloader then follow the rest of your instructions....
Click to expand...
Click to collapse
At this step, pls install a custom recovery ~> goto recovery mode ~> File Management, you'll see that there're system folders, like /sdcard/, check out if they're empty or not...
Bottom line: make sure firmware.zip has been flashed (do the flash command twice), verify step 4 and step 5 in #1
Hello,
Many thanks for your reply.
I did flash the OTA zip after modifying it. I can only think that I did not wait long enough after the boot animation, although i did wait approx 5 minutes or more.
Since posting here I have managed to install the OTA update but I used the alternative method here:
http://forum.xda-developers.com/showthread.php?t=2573479
I already had an unlocked bootloader and S-OFF so I skipped that part of the tutorial...
But I was unsuccessful the first time because I did not SUPERCID, as I read passed it..

[Q] HTC One S Insert USB storage for mounting

I installed Maximus 10 HD on my one s and I only have 2.23 gb available and when I go to storage it says "Insert USB storage for mounting".
I tried Magio Rom and i have the same problem with it.
What can I do?
matei890 said:
I installed Maximus 10 HD on my one s and I only have 2.23 gb available and when I go to storage it says "Insert USB storage for mounting".
I tried Magio Rom and i have the same problem with it.
What can I do?
Click to expand...
Click to collapse
I've had this issue too. It happened cause you have not properly followed steps for installation.
Try these!
Download ROM and put it on internal sdcard.
Put device in fastboot mode (Power + Volume Down)
Enter Recovery.
Find in Recovery "Choose zip from sdcard" choose appropriate zip file.
Proceed steps that Aroma installer gives.
After install finish you MUST reboot device in fastboot mode.
Now it's time to install 4.2.2 capable firmware.
Download Install package.rar (Archive stored in same folder as rom)
(Note that fastboot.exe not capable yet with Windows 8.1, you need Windows XP/Vista/7/8)
Connect device to PC and make sure you see lines Fastboot USB.
Extract Install package in any place on your PC.
Open folder, run Command Prompt, type there
1.fastboot oem rebootRUU
2.fastboot flash zip firmware.zip
If you get an error
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
type command once again
fastboot flash zip firmware.zip
fastboot flash recovery TWRP2.6.1.0.img
fastboot reboot
Make sure that installation was successful and press enter to reboot device.
Device will boot in system, wait till you can see device on PC and copy ROM on internal SD card once again.
Repeat ROM installation with Aroma installer, do wipe during install.
Congratulations, you have device with fully working Android 4.2.2 and Sense 5.0.
Have a nice day!

[FIX]Distortion/Crackling/Slower audio playback while screen off.

This is a fix for those of you who are facing problem with their VZW M8's audio distortion while screen is off after flashing some ROM/KERNEL.
Step by Step Guide :-
1. Download this file - https://drive.google.com/file/d/0B0PzOLijcR7sbkhJYUY5RjItNFk/view?usp=sharing
2. Reboot your phone into bootloader
3. Open command prompt(Note : ADB/Fastboot drivers Must be installed and properly working).
4. Connect Your phone to PC
5.Type this in command prompt
Code:
fastboot oem rebootRUU
6.
Code:
fastboot flash zip <name of the file you have downloaded with its proper location>
7.If the flashing fails repeat step 6.(It must be a success on second attempt if not try again.)
8.
Code:
fastboot reboot
9.Test if the problem still persist
10.if yes, tell below.
11. if no, enjoy the music! also inform below.
Alternate METHOD for flashing above file :
1. rename the downloaded file to 0P6BIMG.zip
2. place it in your external sd cards root directory(not in any folder)
3.Reboot to bootloader
4. Select HBOOT
5. Press Volume up after HBOOT has finished scanning The file.
6. press power button once installation is over.
7. Test if the problem still persist
8. if yes, tell below.
9. if no, enjoy the music! also inform below.
NOTE : If you update phones stock firmware unofficially you might need to follow this guide again
Maaaaaaaaaaaaaaaaan!!!!!! YOU ARE AMAZING!!! I have been dealing with this problem for over 2 weeks!!! this is the solution!!! thank you very much!!!

TWRP for Gionee M5 Mini MT6580

I've done deep search about this concern for 2 hours but I've only seen twrp for M5 mini but with different Mediatek. I have MT6580 so some forums doesnt give me any answers so I need help to you guys if you have twrp for this type of Mediatek. Need to flash a rom to my phone~ Thanks in advance
Upload your stock recovery, we'll see if something can be done
I'm new so i don't know how to extract my stock recovery
CSAPawn said:
I'm new so i don't know how to extract my stock recovery
Click to expand...
Click to collapse
Then you download your stock firmware just extract it with any unzipper app like winrar or 7zip, then zip it and upload it here or it´s not able upload it to some cloud host like Google Drive
This is my stock firmware Lollipop
http://www.mediafire.com/file/wd5a4xqftiao7t6/Gionee_M5_Mini_MT6580_5.1.zip
I have Marshmallow update right now so here's the update file https://mega.nz/#!jQdWkYiB
CSAPawn said:
I have Marshmallow update right now so here's the update file https://mega.nz/#!jQdWkYiB
Click to expand...
Click to collapse
Download it, you might need it in the future, and inside the zip you will see a file called recovery, extract it and upload me here, I need this file to try to made a custom recovery for your device
Okay! Le me just download it~
https://drive.google.com/file/d/1i57tu6g-qLWFHL8JknfrHJqh1SsYDk_X/view here's the recovery of Marshmallow update
CSAPawn said:
https://drive.google.com/file/d/1i57tu6g-qLWFHL8JknfrHJqh1SsYDk_X/view here's the recovery of Marshmallow update
Click to expand...
Click to collapse
This is not your recovery, there must to have other recovery with image extension, guide you for the size, atleast a 10 MB
That is the only one with the name "recovery" in the zip file, i think i should find it in Lollipop stock rom. Gonna download it first~
CSAPawn said:
That is the only one with the name "recovery" in the zip file, i think i should find it in Lollipop stock rom. Gonna download it first~
Click to expand...
Click to collapse
Show me a screen of your zip open please to see the files.
What is the size of your recovery cause the uploaded is just some kbs
And what is the size of the boot image
SubwayChamp said:
Show me a screen of your zip open please to see the files.
What is the size of your recovery cause the uploaded is just some kbs
And what is the size of the boot image
Click to expand...
Click to collapse
https://ibb.co/cYWrsy here's the main directory of the zip
https://ibb.co/nMLqkJ and recovery file found on "sig" folder on main directory
Boot Image file size is 7.48 MB
I'm now downloading the Lollipop Stock Rom because that Marshmallow Rom is just an update which might be incomplete in some files~
https://drive.google.com/open?id=1wX5N5_NzKhbg4gWG2RIQ6Ta5MzHYK0W1
Here's the link of 2 files with recovery file name in .img file format
https://ibb.co/gGCvKd
Here's the full content of the Lollipop Stock Rom
CSAPawn said:
https://drive.google.com/open?id=1wX5N5_NzKhbg4gWG2RIQ6Ta5MzHYK0W1
Here's the link of 2 files with recovery file name in .img file format
https://ibb.co/gGCvKd
Here's the full content of the Lollipop Stock Rom
Click to expand...
Click to collapse
Ok, now you need to unlock bootloader. Follow the next steps:
Download to your pc the latest version of adb installer from here https://androidmtk.com/download-15-seconds-adb-installer , in the process just type "y" to all questions. After it finishes unpack this adb folder and put it in your main drive, by i.e. c: drive
View attachment adb.zip
Install all the drivers for your device.
1- In your device go to settings/about device/build number and tap 7 times, then go back to settings and you will see developer options into settings, enable USB debugging and enable OEM unlock if it´s present,
2- Extract from the zip twrp.img and put it inside adb folder
View attachment twrp-wl2.zip
3- Connect your device power on to pc and run the file "run-adb" as administrator with right mouse button
4- Type adb reboot bootloader and you will be prompted in display of your device, tap on the small box "always allow" and tap on "ok"
5- Now device will reboot to fastboot mode, type fastboot devices you have to see a serial of your device in the window, then if it´s detected type now fastboot oem unlock you have to confirm wiith the button of your device, pay attention.
6- Then you will go to flash twrp onto your device, for this type fastboot flash recovery twrp.img and then to reboot to recovery type fastboot boot twrp.img is important that here device reboots to recovery before to reboot to system.
7- In twrp you will be prompted to allow modifications, just swipe to confirm.
If you also want to root your device download the latest version of Magisk in zip format to flash it through twrp.
When al finishes if sucessful you have to format data (all your data will gone) in order to can reboot to system again due to encryption, anyway unlocking bootloader most probably you will lose it before.
Read carefully and do steps one by one, don´t jump nor ignore nothing of the indicated to avoid any damage. If you are not sure in some steps just stops process and ask before.
I´m not sure you that this twrp matches for your device cause I can´t try before and but will see that.
Don´t forget to provide screenies of the process if something goes wrong to can clear.
OMG Thank you very much for this guide, I'll follow the steps later and post a pic after~
SubwayChamp said:
Ok, now you need to unlock bootloader. Follow the next steps:
Download to your pc the latest version of adb installer from here https://androidmtk.com/download-15-seconds-adb-installer , in the process just type "y" to all questions. After it finishes unpack this adb folder and put it in your main drive, by i.e. c: drive
View attachment 4530163
Install all the drivers for your device.
1- In your device go to settings/about device/build number and tap 7 times, then go back to settings and you will see developer options into settings, enable USB debugging and enable OEM unlock if it´s present,
2- Extract from the zip twrp.img and put it inside adb folder
View attachment 4530170
3- Connect your device power on to pc and run the file "run-adb" as administrator with right mouse button
4- Type adb reboot bootloader and you will be prompted in display of your device, tap on the small box "always allow" and tap on "ok"
5- Now device will reboot to fastboot mode, type fastboot devices you have to see a serial of your device in the window, then if it´s detected type now fastboot oem unlock you have to confirm wiith the button of your device, pay attention.
6- Then you will go to flash twrp onto your device, for this type fastboot flash recovery twrp.img and then to reboot to recovery type fastboot boot twrp.img is important that here device reboots to recovery before to reboot to system.
7- In twrp you will be prompted to allow modifications, just swipe to confirm.
If you also want to root your device download the latest version of Magisk in zip format to flash it through twrp.
When al finishes if sucessful you have to format data (all your data will gone) in order to can reboot to system again due to encryption, anyway unlocking bootloader most probably you will lose it before.
Read carefully and do steps one by one, don´t jump nor ignore nothing of the indicated to avoid any damage. If you are not sure in some steps just stops process and ask before.
I´m not sure you that this twrp matches for your device cause I can´t try before and but will see that.
Don´t forget to provide screenies of the process if something goes wrong to can clear.
Click to expand...
Click to collapse
When I type fastboot devices nothing happens, adb says <waiting for device> and my phone is now in FASTBOOT mode...
https://ibb.co/gf9RUd
Already Installed ADB installer, extract adb.zip into my C. then run administrator.
USB Debugging and OEM Unlock has been enabled in my phone but still my PC doesn't show any serial number
I think my PC doesn't recognize my phone
CSAPawn said:
Already Installed ADB installer, extract adb.zip into my C. then run administrator.
USB Debugging and OEM Unlock has been enabled in my phone but still my PC doesn't show any serial number
I think my PC doesn't recognize my phone
Click to expand...
Click to collapse
Just copy paste all the commands that I gave you. It´s fastboot devices not fastboot device in fastboot you ever have to write exactly or the command won´t work.

Categories

Resources