For All users who own GT-I8160L/P variant of the Galaxy Ace 2 and get Unknown Baseband / IMEI ( Doesnt detect SIM ) while flashing Custom ROMS, Here is a solution ... :laugh:
Requirements :
1. A working brain
2. Galaxy Ace 2 GT-I8160/P/L
3. A computer and rooted phone.
4. Root explorer or similar app
Instructions
1. Using Root Explorer ( or similar app ) go to /system/lib and locate a folder called "tee" . ( This should be done using a ROM which detects SIM )
2. Copy that folder onto your SD Card / PC .
3. Open your desired ROM using 7zip / Or any similar application and once again navigate to /system/lib and replace the "tee" folder with the one you just copied
4. Then flash the ROM as usual using custom recovery !
5. WORKING??
For people who have no idea even after such an awesome guide , Here!
Note : To flash custom ROMs based on Jelly Bean, install any firmware based on android 4.1.2 and copy its "tee" folder.
LINKS :
For i8160P :
GT-I8160P DBT I8160PXXME1 (Germany)
GT-I8160P PHE I8160PXXME1 (Spain)
GT-I8160P VIA I8160PXXME1 (Germany O2):
GT-I8160P O2C I8160PXXME1 (Czech Republic O2C)
GT-I8160P XEZ I8160PXXME1 (Czech Republic)
For i8160L
GT-I8160L THL I8160LDCME1 (Thailand)
Credits :
zahirovic.safet ( for all the links ) :good:
Don't Forget to click the Thanks button if this helped
this works, hope the same thing works with JB when released.
thank you!
I can also confirm this works. Finally able to get custom ROMs on the 'L' model. That ****s legit.
Re: [GUIDE] Installing Custom Roms on GT-I8160L
gracias amigo eres lo mejor te amo!!!!!!!
Sent from my GT-I8160L using xda app-developers app
Just out of curiousity, whats the BIG difference between I8160L and I8160? (Hardware-wise)
If I8160P has NFC, and I8160L is for latin america (??)
Re: [GUIDE] Installing Custom Roms on GT-I8160L
Ahora puedo correr las custom sin problemas!!!! Gracias!!!
Sent from my GT-I8160 using xda app-developers app wiht Krillo's v5
Dr01nE said:
Just out of curiousity, whats the BIG difference between I8160L and I8160? (Hardware-wise)
If I8160P has NFC, and I8160L is for latin america (??)
Click to expand...
Click to collapse
I dont know myself !! I own a GT-I8160 not 'L' version
Dr01nE said:
Just out of curiousity, whats the BIG difference between I8160L and I8160? (Hardware-wise)
If I8160P has NFC, and I8160L is for latin america (??)
Click to expand...
Click to collapse
It's about mobile network frequency.(For difference mobile network,GT-I8160:900+2100MHz GT-I8160L:850+2100MHz)
Sorry for my bad grammar.
This works with MB4 Jellybean leak?
Im afraid to try it
Maydaylol said:
This works with MB4 Jellybean leak?
Im afraid to try it
Click to expand...
Click to collapse
You want to install the jelly bean leak?
Yup, i've got the i8160L Model, someone said in one post that maybe this could work with the jellybean leak rom
JB
Guys, I also want to try jelly bean on my i8160l but how can I put the tee folder on jb, how do I put it in jelly bean? And is it through my pc or directly from my phone? Can someone explain me please?
Realtgg said:
Guys, I also want to try jelly bean on my i8160l but how can I put the tee folder on jb, how do I put it in jelly bean? And is it through my pc or directly from my phone? Can someone explain me please?
Click to expand...
Click to collapse
This method doesn't work for Odin flashable roms
Thanks, worked on I8160P
loof13 said:
For All users who own GT-I8160L variant of the Galaxy Ace 2 and get Unknown Baseband / IMEI ( Doesnt detect SIM ) while flashing Custom ROMS, Here is a solution ... :laugh:
1. Using Root Explorer ( or similar app ) go to /system/lib and locate a folder called "tee" . ( This should be done using a ROM which detects SIM )
2. Copy that folder onto your SD Card / PC .
3. Open your desired ROM using 7zip and once again navigate to /system/lib and replace the "tee" folder with the one you just copied
4. Then flash the ROM as usual using custom recovery !
[/COLOR][/SIZE]
Click to expand...
Click to collapse
Can you provide a working tee directory from GT-I8160 device? Because even on stock rom, the device doesnt detect sim.
Okay, now I really messed up. When turning on the phone, I get a SOFTWARE UPDATE FAIL error message, nothing else. I tried to flash a modem I extracted from stock rom using
Code:
tar cf modem.tar modem.bin.md5
md5sum -t modem.tar>>modem.tar
mv modem.tar modem.tar.md5
in Linux to create the file. It failed, now I get the error on boot.
So:
Is there anything I can do to rebuild this phone from scratch? Including partitioning etc?
I just need it to work somehow, because right now, I went from a phone that’s not mine and didn’t have play store to a phone that’ll cost me 230 USD, which I don’t have
Reflashing the kernel helped the error message, but I still can’t flash radio
ziphi said:
Okay, now I really messed up. When turning on the phone, I get a SOFTWARE UPDATE FAIL error message, nothing else. I tried to flash a modem I extracted from stock rom using
Code:
tar cf modem.tar modem.bin.md5
md5sum -t modem.tar>>modem.tar
mv modem.tar modem.tar.md5
in Linux to create the file. It failed, now I get the error on boot.
So:
Is there anything I can do to rebuild this phone from scratch? Including partitioning etc?
I just need it to work somehow, because right now, I went from a phone that’s not mine and didn’t have play store to a phone that’ll cost me 230 USD, which I don’t have
Reflashing the kernel helped the error message, but I still can’t flash radio
Click to expand...
Click to collapse
Have your tried re flashing stock rom?
loof13 said:
Have your tried re flashing stock rom?
Click to expand...
Click to collapse
yes, it worked. i got the phone running again, but it still can't detect the sim card. would using someone else's tee directory work? i also tried flashing a Chinese rom, cause the phone was bought in China, but it didn't help. do you have any advice?
Send me screenshots of your about phone. Also do other sims work in your phone ??
loof13 said:
Send me screenshots of your about phone. Also do other sims work in your phone ??
Click to expand...
Click to collapse
Thank you for your offer, I managed to solve the problem, see this thread. It took me only about 30 hours… I’m so happy right now, cause it wasn’t even my phone
Related
hi all
Im new for XDA , actually i come here to learn from Experts well i guess now yet again i need a help
I flashed my Galaxy SL I9003 using the provided guidelines and the firmwares every thing was perfect until now. i flashed my phone from froyo to GB.
in froyo i used to use one app which is Al-jazeera news widget. it was pre-installed in my phone when i brought it. but sadly it is not available with GB. i purchase this phone in gulf region and now i have upgrade it with Russian firmware ( I9003SERKPU_SER )
Is there any way i can get it back (i dont want to go back to froyo.. i love GB )
Please help me
no body in XDA to help me ?
Try to install that apk
Muzain said:
no body in XDA to help me ?
Click to expand...
Click to collapse
Flash this firmware.
It's got that widget and lot more.
http://www.hotfile.com/dl/149111090/49bff21/I9003JPKPH_I9003OJPKPC_PAK.zip.html
Mihai134 said:
Try to install that apk
Click to expand...
Click to collapse
thanks for your time bro but i already try those it doesn't contain the widget.....
rockyddroid said:
Flash this firmware.
It's got that widget and lot more.
http://www.hotfile.com/dl/149111090/49bff21/I9003JPKPH_I9003OJPKPC_PAK.zip.html
Click to expand...
Click to collapse
Can you please tel me what is contains...(features, apps etc) is this is a new firmware or kernell or something else.... please don't get me wrong still I'm newbie
after hours of researching i have fine-tuned my phone as i want so if i flash this will it ruin all my efforts..? do i have to install all my software's etc etc back again?
Muzain said:
Can you please tel me what is contains...(features, apps etc) is this is a new firmware or kernell or something else.... please don't get me wrong still I'm newbie
after hours of researching i have fine-tuned my phone as i want so if i flash this will it ruin all my efforts..? do i have to install all my software's etc etc back again?
Click to expand...
Click to collapse
This is the new value pack, i.e new official firmware.
It contains the Al Jazeera widget you were talking about. In addition, it has apps like tquran and prayertimes. It has a new lockscreen and callscreen.
It's perfectly safe to flash it. I got first hand experience.
Just flash it.
rockyddroid said:
This is the new value pack, i.e new official firmware.
It contains the Al Jazeera widget you were talking about. In addition, it has apps like tquran and prayertimes. It has a new lock screen and call screen.
It's perfectly safe to flash it. I got first hand experience.
Just flash it.
Click to expand...
Click to collapse
Downloading....
BTW i already flashed a some lock screens and etc etc from this thread http://forum.xda-developers.com/showthread.php?t=1618453
will be wiped out? sorry if this is a dumb question (no problem even it does)
And my phone is Galaxy SL I9003 with Gingerbread 2.3.6 XXKPU will this be compatible..?
i took the challenge
i flashed it thru ODIN everything is perfect except the i cons
my XXKPU icons are curved and more colorful than this firmware... well i root and took the exact .apk from it but i cant install it in my current firmware
any idea?
Muzain said:
i took the challenge
i flashed it thru ODIN everything is perfect except the i cons
my XXKPU icons are curved and more colorful than this firmware... well i root and took the exact .apk from it but i cant install it in my current firmware
any idea?
Click to expand...
Click to collapse
I think you need to use Root Explorer and paste those files somewhere. Don't know for sure. Sorry.
rockyddroid said:
I think you need to use Root Explorer and paste those files somewhere. Don't know for sure. Sorry.
Click to expand...
Click to collapse
i tried that but no luck.....
please help
please help i did everything up to my knowledge i need guidance from experts
in short what i did :
1. installed Pakistan firmware thru Odin (2.3.4 KPH)
2. rooted
3. extract the file from /system/app using root explorer
4. took a copy of the ODEX file also
5. re-flashed my phone from the beginning (not just pda) with XXKPE and from
that to XXKPU
( FYI: didn't work in this either in my previous attempts)
6. rooted
7. copy the .apk and the ODEX file to /system/app using root explorer
8. set permission Rw-R-R for the .apk ( i even tried it as it was)
9. restart (no luck) then DE-ODEXed (still no luck)
10. ????????????
Hi!
I have a Brazilian Galaxy Note 10.1 (firmware code: ZVV) and I want to install a ROM that I found in sammobilie that has some improvements.
However this ROM is designed for Chile (firmware code: CHO).
The both firmwares seems to be designed to the same region:
My firmware: N8000UBALGA
Firmware that I want to flash: N8000UBALI3
The difference is the CSC.
I have two questions:
1) Is it "safe" to flash this ROM using Odin?
2) How can I know if the new firmware will have support for Brazilian Portuguese?
Thanks,
Ronan
Ronis_BR said:
Hi!
I have a Brazilian Galaxy Note 10.1 (firmware code: ZVV) and I want to install a ROM that I found in sammobilie that has some improvements.
However this ROM is designed for Chile (firmware code: CHO).
The both firmwares seems to be designed to the same region:
My firmware: N8000UBALGA
Firmware that I want to flash: N8000UBALI3
The difference is the CSC.
I have two questions:
1) Is it "safe" to flash this ROM using Odin?
2) How can I know if the new firmware will have support for Brazilian Portuguese?
Thanks,
Ronan
Click to expand...
Click to collapse
Personally I prefere europian roms (first to get recent updates and have some good samsung apps not avaliable on other countries ) so you can download the Rom from Portugal and flash via Odin , it is safe and you won't lose your waranty. And about Chile , if its native language is Portuguese then its Rom will support portuguees for sure .
Sent from my GT-N8000 using xda app-developers app
hoss_n2 said:
Personally I prefere europian roms (first to get recent updates and have some good samsung apps not avaliable on other countries ) so you can download the Rom from Portugal and flash via Odin , it is safe and you won't lose your waranty. And about Chile , if its native language is Portuguese then its Rom will support portuguees for sure .
Sent from my GT-N8000 using xda app-developers app
Click to expand...
Click to collapse
The language in Chile is not Portuguese, also Portuguese from Portugal is quite different from Brazilian Portuguese.
However in my Brazilian ROM, I have option to select almost all languages in System configurations.
I'm just wondering if the ROM from Chile will also have this option...
So best idea is to go back to sammobile, find your stock rom and have that as a backup in case you decide you need to go back.
The only way you'll know for sure is to try it...
ultramag69 said:
So best idea is to go back to sammobile, find your stock rom and have that as a backup in case you decide you need to go back.
The only way you'll know for sure is to try it...
Click to expand...
Click to collapse
Ok, but it won't brick my device right
Also, I'm not sure what options do I need to set in Odin.
I saw some sites saying to do not mark Repartition. Is it right?
Thanks,
Ronan
Ok, I have flashed the firmware from Chile (CHO) without any problems.
It was almost the same... I only saw one difference: in S Note, you have a scroll bar.
Thus, I flashed my original ROM again (Vivo ROM, ZVV).
Afterwards I had a little problem with Kies. The installed ROM is really ZVV (I checked with *#1234#), but Kies was showing that I had a CHO ROM and that an uptade through Kies is not possible. I tried everything, factory reset, cache wipe, reflash the ZVV ROM, but nothing fixed the problem. Then I realized that the problem was not with my Galaxy Note, but with Kies itself. I uninstalled it and used a register cleanner to remove all entries related to Kies. Then I installed Kies again and the problem was finally fixed!! I think that Kies stored my device information with CHO ROM and did not uptade CSC when I plugged it with the ZVV ROM.
Thanks,
Ronan
Sent from my GT-N8000 using xda premium
Cool, glad everything went well.
Rule of thumb for ODIN, everything is set up when you start ODIN. All you need to do is add the files you wish to flash. Don't change any other settings and,generally, all will be well... There's always a chance of a bad flash but most times it's user error rather than anything else. It can also be a ba download of the flash file. If you have an MD5 checksum for the update, use an MD5 checker app to ensure the flash file isn't corrupted. This will lessen the chance of a failed flash...
Cheers mate...
ultramag69 said:
Cool, glad everything went well.
Rule of thumb for ODIN, everything is set up when you start ODIN. All you need to do is add the files you wish to flash. Don't change any other settings and,generally, all will be well... There's always a chance of a bad flash but most times it's user error rather than anything else. It can also be a ba download of the flash file. If you have an MD5 checksum for the update, use an MD5 checker app to ensure the flash file isn't corrupted. This will lessen the chance of a failed flash...
Cheers mate...
Click to expand...
Click to collapse
if I flash a ROM from another country, will I lose apps and settings?
PS: I anot rooted, so I cannot make backups with titanium
Depends on the update... I'v had updates that wipe ALL data then I've had others where the data is still there... I tend to find its a roll of the dice every time. This is why I root my device....
I updated one just recently, the Oz rom, and it left all data intact however it is better to clear all data otherwise you might have a problem with the new rom and old data causing issues...
My firmware: N8000ZCCMD2 4.1.2
Firmware that I want to flash:Android 4.1.2 XXCMA2 Firmware Details: is that suitable pls help
Flash a different carrier's KitKat 4.4.2 on N8000
Hi! My tablet (N8000) has the 4.1.2 version, and I don't think any KitKat update will come soon, because the device code is SEK (Ukraine / Kyivstar) and you know the situation there.
Therefore I decided to upgrade via Odin to the 4.4.2 official version from Poland, at least. Or any other country that already has the update.
Will I encounter any problems if flashing the ROM from another country? I know the answer is pretty straight forward that everything should be fine, but still, better ask.
Thank you!
Please help !
Update media please wait
E:Con t mount /dev/block/mmcblkop1
( No such file or directory )
E: copy_dbdata_media : Can t mount SDCARD :
your storage not prepard yet.please use Ui me
nu for format and reboot actions .
copy default media content failed..
i flash cm10.1 and is failed
View attachment 1821265
0988846477 said:
Please help !
Update media please wait
E:Con t mount /dev/block/mmcblkop1
( No such file or directory )
E: copy_dbdata_media : Can t mount SDCARD :
your storage not prepard yet.please use Ui me
nu for format and reboot actions .
copy default media content failed..
i flash cm10.1 and is failed
View attachment 1821265
Click to expand...
Click to collapse
I dont understand man... after it is said like 10000 times on forum and still you ignore the fact you cannot flash via samsung stock recovery... you need a custom recovery like CWM to flash a custom ROM..
anyways lets just bring you phone back...
*Download ODIN http://dl.xda-developers.com/attachd...din3-v1.85.zip
*Also download any gingerbread stock ROM (http://hotfile.com/dl/145857619/8242...Q_SER.zip.html
Pass: sampro.pl)
*Install Samsung USB drivers.
*Put your phone into download mode by pressing Volume down+Home+Power key...
*Open ODIN and select the downloaded stock ROM (PDA only)
*Now connect your phone to pc via usb cable (you should see a com port turned yellow in ODIN which means your phone is detected by ODIN).
*Click start and wait till it says it PASSED
*Reboot your phone.
*Find the proper instruction to root your phone and how to flash a custom recovery.Then install a Custom ROM of your choice(read the authors installing instructions first and proceed)
I think he not flashing zip.
He have corrupted mmc chip.
Sent from my GT-I9003 using Tapatalk 2
mustafahussain said:
*Download ODIN http://dl.xda-developers.com/attachd...din3-v1.85.zip
*Also download any gingerbread stock ROM (http://hotfile.com/dl/145857619/8242...Q_SER.zip.html
Click to expand...
Click to collapse
Hi
I'm trying to restore my phone because it doesn't start any more after latest update of CM 10.1 (nor normal boot nor recovery mode) so I want to try to reinstall stock rom, but your links are broken can you post the correct ones? thank you
EDIT
Found links by myself
Can I try the procedure, anyway?
Flashing and change android version 2.2.1 Froyo to android 2.3.6 GB
mustafahussain said:
I dont understand man... after it is said like 10000 times on forum and still you ignore the fact you cannot flash via samsung stock recovery... you need a custom recovery like CWM to flash a custom ROM..
anyways lets just bring you phone back...
*Download ODIN http://dl.xda-developers.com/attachd...din3-v1.85.zip
*Also download any gingerbread stock ROM (http://hotfile.com/dl/145857619/8242...Q_SER.zip.html
Pass: sampro.pl)
*Install Samsung USB drivers.
*Put your phone into download mode by pressing Volume down+Home+Power key...
*Open ODIN and select the downloaded stock ROM (PDA only)
*Now connect your phone to pc via usb cable (you should see a com port turned yellow in ODIN which means your phone is detected by ODIN).
*Click start and wait till it says it PASSED
*Reboot your phone.
*Find the proper instruction to root your phone and how to flash a custom recovery.Then install a Custom ROM of your choice(read the authors installing instructions first and proceed)
Click to expand...
Click to collapse
Hi Mustafa.
I´m new in this forum.
u r senior member, and maybe u can help me ( sorry about my english i´m from Brazil.)
I have gt-I9003L.
have a big problem.
the signal is poor. i can´t use in closed areas, like home, shopping mall etc. work only in open area and not so good.
i would like to fix it ( signal problem ) i unlocked the phone with galaxysim unlock.
i wanna use the phone totally. phone with no signal and no internet conection, i don´t need it.
i have superuser access, busybox, titanium backup.
i´m trying to flash my phone to check if i can solve my problem.
i did follow the instructions in this link : http://www.tarracodroid.com/index.p...scl-gt-i9003?pageNumber=1#udjaCommentsWrapper
and now, my phone is dead. only black screen. i cant turn the phone on.
Please. help me
DJEPS said:
Hi Mustafa.
I´m new in this forum.
u r senior member, and maybe u can help me ( sorry about my english i´m from Brazil.)
I have gt-I9003L.
have a big problem.
the signal is poor. i can´t use in closed areas, like home, shopping mall etc. work only in open area and not so good.
i would like to fix it ( signal problem ) i unlocked the phone with galaxysim unlock.
i wanna use the phone totally. phone with no signal and no internet conection, i don´t need it.
i have superuser access, busybox, titanium backup.
i´m trying to flash my phone to check if i can solve my problem.
i did follow the instructions in this link : http://www.tarracodroid.com/index.p...scl-gt-i9003?pageNumber=1#udjaCommentsWrapper
and now, my phone is dead. only black screen. i cant turn the phone on.
Please. help me
Click to expand...
Click to collapse
Let me try help.
No signal inside building and bad signal in outdoor, odd. Are you on custom ROM or stock ROM?
When you said dead, does it vibrate and shows the bootlogo (Samsung, galaxy scl GT-i9003) then black screen (this is called 'Boot Freeze'), or the phone didn't vibrate and it didn't show any signs of life (if you stuck on this position...... last option, change mother board. This is called 'Hard Bricked')?
I need to know are you on custom/stock ROM, your kernel, and your baseband version.
~Message sent via telepathy from Galaxy SL
Black Screen
Rich'Dawg' said:
Let me try help.
No signal inside building and bad signal in outdoor, odd. Are you on custom ROM or stock ROM?
When you said dead, does it vibrate and shows the bootlogo (Samsung, galaxy scl GT-i9003) then black screen (this is called 'Boot Freeze'), or the phone didn't vibrate and it didn't show any signs of life (if you stuck on this position...... last option, change mother board. This is called 'Hard Bricked')?
I need to know are you on custom/stock ROM, your kernel, and your baseband version.
~Message sent via telepathy from Galaxy SL
Click to expand...
Click to collapse
I ave i think is custom rom, i never change nothing in the phone.
when i try to turn on, just vibrate once, e only black screen, don´t show me boot logo...
now i cant give baseband and kernel, i don´t have access, just like i told u, only black screen, but i can put it in download mode...
didi u see the link? thanks!!!
Android X Model
Rich'Dawg' said:
Let me try help.
No signal inside building and bad signal in outdoor, odd. Are you on custom ROM or stock ROM?
When you said dead, does it vibrate and shows the bootlogo (Samsung, galaxy scl GT-i9003) then black screen (this is called 'Boot Freeze'), or the phone didn't vibrate and it didn't show any signs of life (if you stuck on this position...... last option, change mother board. This is called 'Hard Bricked')?
I need to know are you on custom/stock ROM, your kernel, and your baseband version.
~Message sent via telepathy from Galaxy SL
Click to expand...
Click to collapse
hi Dawg.
Maybe u can help me.
I made all the procedures -> forum.xda-developers.com/showthread.php?t=1894737
in this moment i´m using 2.3.6 GB for GT-I9003.
But Now my phone show me other model version GT-I9003 and the original model is GT-I9003L my model finish with "L"
And looking for information on internet i found sammobile.com.
there, i found my device model ( GT-I9003L ) and a up grade firmware 2.3.6 for GT-I9003L. ( 2.2.1 original version )
My Signal problem still the same... I´m looking for a good baseband to use my phone in BRAZIL. i don´t now if you can help me.
*#1234#
Model Version:
PDA: I9003XXKPE
PHONE: I9003XXKPE
CSC: I9003XXKPE
Settings -> About Phone
Model Number: GT-I9003 ( before the procedure above was GT-I9003L )
Firmware version: 2.3.6
Baseband Version: I9003XXKPQ
Kernel Version: 2.3.6.7-CL709629 [email protected] #9
Build Number: GINGERBREAD.XXKPQ
Could u help me!?
Thanks in advance!
DJEPS said:
hi Dawg.
Maybe u can help me.
I made all the procedures -> forum.xda-developers.com/showthread.php?t=1894737
in this moment i´m using 2.3.6 GB for GT-I9003.
But Now my phone show me other model version GT-I9003 and the original model is GT-I9003L my model finish with "L"
And looking for information on internet i found sammobile.com.
there, i found my device model ( GT-I9003L ) and a up grade firmware 2.3.6 for GT-I9003L. ( 2.2.1 original version )
My Signal problem still the same... I´m looking for a good baseband to use my phone in BRAZIL. i don´t now if you can help me.
*#1234#
Model Version:
PDA: I9003XXKPE
PHONE: I9003XXKPE
CSC: I9003XXKPE
Settings -> About Phone
Model Number: GT-I9003 ( before the procedure above was GT-I9003L )
Firmware version: 2.3.6
Baseband Version: I9003XXKPQ
Kernel Version: 2.3.6.7-CL709629 [email protected] #9
Build Number: GINGERBREAD.XXKPQ
Could u help me!?
Thanks in advance!
Click to expand...
Click to collapse
Wait, you said i9003L? Oh right, its the code for SL user in America. Try DDLF2, that is the most stable ROM.
If that doesn't effect the phone..... Something is wrong inside your phone.
Sent from my GT-I9003 using xda app-developers app
0988846477 said:
Please help !
Update media please wait
E:Con t mount /dev/block/mmcblkop1
( No such file or directory )
E: copy_dbdata_media : Can t mount SDCARD :
your storage not prepard yet.please use Ui me
nu for format and reboot actions .
copy default media content failed..
i flash cm10.1 and is failed
View attachment 1821265
Click to expand...
Click to collapse
Full KPE with odin 1.85 to solve this problem
The Procedure
Rich'Dawg' said:
Wait, you said i9003L? Oh right, its the code for SL user in America. Try DDLF2, that is the most stable ROM.
If that doesn't effect the phone..... Something is wrong inside your phone.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Hi Dawg!
Could you help me?
I need know, where can i find this file DDLF2 , and how can i upgrade my phone. the correct procedure.
Thanks in advance
See ya
DJEPS said:
Hi Dawg!
Could you help me?
I need know, where can i find this file DDLF2 , and how can i upgrade my phone. the correct procedure.
Thanks in advance
See ya
Click to expand...
Click to collapse
Www.sammobile.com in the firmware section
Sent from my LT26i using Tapatalk 2
DDLF2
Rich'Dawg' said:
Wait, you said i9003L? Oh right, its the code for SL user in America. Try DDLF2, that is the most stable ROM.
If that doesn't effect the phone..... Something is wrong inside your phone.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Hi!
i´m already with DDLF2 now!
But signal, still the same!!! i don´t know what to do anymore...
i don´t know how many times i change Android version in my phone... maybe replace antenna?
I just wanna us my phone...
Somebody help meeeeee!!!!!
i've a galaxy sl 9003 with a stock rom, suddenly before 2 days the phone took a restart and then i was left with no cellular signal, no imei, no baseband version, i tried switching sim's but in vain, asked the guy at the service centre and got a shocker that the motherboard needs to be replaced....need help on this
the phone is working its booting up i can use the wifi but the cellular part isn't working...
bhavin.trivedi said:
i've a galaxy sl 9003 with a stock rom, suddenly before 2 days the phone took a restart and then i was left with no cellular signal, no imei, no baseband version, i tried switching sim's but in vain, asked the guy at the service centre and got a shocker that the motherboard needs to be replaced....need help on this
the phone is working its booting up i can use the wifi but the cellular part isn't working...
Click to expand...
Click to collapse
try flashing a CM9 based rom...
DDJF2
Rich'Dawg' said:
Wait, you said i9003L? Oh right, its the code for SL user in America. Try DDLF2, that is the most stable ROM.
If that doesn't effect the phone..... Something is wrong inside your phone.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Hi! Dawg
now, my phone is running DDLF2
*#1234#
PDA - I9003DDLF2
PHONE - I9003DDLE1
CSC - I9003DDLF2
Settings -> About Phone
Model Number: GT-I9003 ( before the procedure above was GT-I9003L )
Firmware version: 2.3.6
Baseband Version: I9003DDLE1
Kernel Version: 2.3.35.7-CL1153545
[email protected] #1
Build Number: GINGERBREAD.DDLF2
The signal, is better, but just a little bit.
Everything ( when i got signal ) works including internet conection, E, H or 3G...
But i´m still trying out fin find a baseband to use my phone with TIM in Brasil.
i gotta friend in the office and his phone is Galaxy SII Lite GT-I9070. if i put both phone one beside another, my friend´s phone gotta signal inside the office, and my phone... NO SERVICE...
I don´t know what to do anymore...
Please, somebody help me!!!!
DJEPS said:
Hi! Dawg
now, my phone is running DDLF2
*#1234#
PDA - I9003DDLF2
PHONE - I9003DDLE1
CSC - I9003DDLF2
Settings -> About Phone
Model Number: GT-I9003 ( before the procedure above was GT-I9003L )
Firmware version: 2.3.6
Baseband Version: I9003DDLE1
Kernel Version: 2.3.35.7-CL1153545
[email protected] #1
Build Number: GINGERBREAD.DDLF2
The signal, is better, but just a little bit.
Everything ( when i got signal ) works including internet conection, E, H or 3G...
But i´m still trying out fin find a baseband to use my phone with TIM in Brasil.
i gotta friend in the office and his phone is Galaxy SII Lite GT-I9070. if i put both phone one beside another, my friend´s phone gotta signal inside the office, and my phone... NO SERVICE...
I don´t know what to do anymore...
Please, somebody help me!!!!
Click to expand...
Click to collapse
how about you lokk at this http://forum.xda-developers.com/showthread.php?t=1004647
i think there are all the modems and stock roms
not able to go into anything except download mode
DJEPS said:
I ave i think is custom rom, i never change nothing in the phone.
when i try to turn on, just vibrate once, e only black screen, don´t show me boot logo...
now i cant give baseband and kernel, i don´t have access, just like i told u, only black screen, but i can put it in download mode...
didi u see the link? thanks!!!
Click to expand...
Click to collapse
i too have the same problem!!!:crying:
also, not detected by odin
wasiq2210 said:
i too have the same problem!!!:crying:
also, not detected by odin
Click to expand...
Click to collapse
Download and Install the latest samsung usb driver in your pc. then try connecting to ODIN in download mod. it will detect your device.
Try Replacing your microSdCard and reflash your rom with a clean install.
If you cannot replace it you can try fixing it by downloading SD Card Formater for windows.
Plug you sdcard to your computer.
Open SDCard Formater.
Format the sdcard using the options that will set it to its default values.
If it doesnt help. Try with a new SDCard.
Please press "Thank" button if it helped you.
Sent from my GT-I9003 using XDA Free mobile app
I have a very strange problem I have updated my note gt-n8000 to 4.1.2 via OTA but when I returned to 4.0.4 stock rom downloaded from sammobile using odin my mobile network disconnect when the screen is off and reconnect when the device come back from sleep (screen is on) ,I try to reflash using different firmware but the problem persist the country is XSG (UAE) and problem fixed when returned to 4.1.2 or 4.1.1
any one has solution? please help me
hossam sokkary said:
I have a very strange problem I have updated my note gt-n8000 to 4.1.2 via OTA but when I returned to 4.0.4 stock rom downloaded from sammobile using odin my mobile network disconnect when the screen is off and reconnect when the device come back from sleep (screen is on) ,I try to reflash using different firmware but the problem persist the country is XSG (UAE) and problem fixed when returned to 4.1.2 or 4.1.1
any one has solution? please help me
Click to expand...
Click to collapse
What ROMs did you used and how used it in Odin? Did you need PIT file for downgrade?
cocoe
hossam sokkary said:
I have a very strange problem I have updated my note gt-n8000 to 4.1.2 via OTA but when I returned to 4.0.4 stock rom downloaded from sammobile using odin my mobile network disconnect when the screen is off and reconnect when the device come back from sleep (screen is on) ,I try to reflash using different firmware but the problem persist the country is XSG (UAE) and problem fixed when returned to 4.1.2 or 4.1.1
any one has solution? please help me
Click to expand...
Click to collapse
Wifi settings can be set to disconnect when screen off.
My Note N8000 has a hardware problem and will prepare to send to tech service through Operator Tech service, still has N8000 in ICS 4.0.4. I would like to downgrade to ICS 4.0.4 from JB 4.1.2 but I am worry about flash using ODIN. I don't know if needed a special ICS pack or ayone would be OK. My worries are about possible repartition back to ICS and PIT needed at same time as separated PDA, CSC and modem files. Does ICS and JB partitions were the same or if different, were to find a specific distributed list of files for ICS installation and then apply a second update for my operator?
If not needed specific PIT/PDA/CSC and Modem files, could I apply a normal pack using ODIN? what for downgrade from JB?
Thanks
wifi
shaun298 said:
Wifi settings can be set to disconnect when screen off.
Click to expand...
Click to collapse
Wifi doesnot disconnect when screen is off only mobile network I didnot find any solution and I want to keep ICS 4.04 can you help me
PIT
cocoe68 said:
My Note N8000 has a hardware problem and will prepare to send to tech service through Operator Tech service, still has N8000 in ICS 4.0.4. I would like to downgrade to ICS 4.0.4 from JB 4.1.2 but I am worry about flash using ODIN. I don't know if needed a special ICS pack or ayone would be OK. My worries are about possible repartition back to ICS and PIT needed at same time as separated PDA, CSC and modem files. Does ICS and JB partitions were the same or if different, were to find a specific distributed list of files for ICS installation and then apply a second update for my operator?
If not needed specific PIT/PDA/CSC and Modem files, could I apply a normal pack using ODIN? what for downgrade from JB?
Thanks
Click to expand...
Click to collapse
I donot find any pit for gt-n8000 until now only pda file odin is safe to use but you should do clearing of cash and reset through recovery mode after flashing with odin because it may stuck to samsung logo
hossam sokkary said:
I donot find any pit for gt-n8000 until now only pda file odin is safe to use but you should do clearing of cash and reset through recovery mode after flashing with odin because it may stuck to samsung logo
Click to expand...
Click to collapse
Thanks for your support and confidence to install it, I finally decided to flash back from JB to ICS using an INU (India N8000DDALH1) version wich include boot.img, cache.img, hidden.img, modem.img, recovery.img and system.img. After installing old ICS from India, I reset user and partition data from recovery and flash my operator ICS 4.0.4 and it woks perfectly, Now it is in ICS 4.0.4 as I need.
hossam sokkary said:
I donot find any pit for gt-n8000 until now only pda file odin is safe to use but you should do clearing of cash and reset through recovery mode after flashing with odin because it may stuck to samsung logo
Click to expand...
Click to collapse
A quick search in the general section found this - http://forum.xda-developers.com/attachment.php?attachmentid=1943965&d=1367957676
You can go to this thread to verify - http://forum.xda-developers.com/showthread.php?t=2268735
Just remember flashing a pit file can potentially hard brick your device if it isn't right...Your choice to flash, not mine...
great thanks
ultramag69 said:
A quick search in the general section found this - http://forum.xda-developers.com/attachment.php?attachmentid=1943965&d=1367957676
You can go to this thread to verify - http://forum.xda-developers.com/showthread.php?t=2268735
Just remember flashing a pit file can potentially hard brick your device if it isn't right...Your choice to flash, not mine...
Click to expand...
Click to collapse
Thank you very much for replying but can you tell me other website in english that have pit and csc and modem because this website is russian and i understand nothing ,great thanks
great thanks
cocoe68 said:
Thanks for your support and confidence to install it, I finally decided to flash back from JB to ICS using an INU (India N8000DDALH1) version wich include boot.img, cache.img, hidden.img, modem.img, recovery.img and system.img. After installing old ICS from India, I reset user and partition data from recovery and flash my operator ICS 4.0.4 and it woks perfectly, Now it is in ICS 4.0.4 as I need.
Click to expand...
Click to collapse
Thank you for replying but i want to ask you about your mobile network status during device sleeping or standby It show no disconnection
hossam sokkary said:
Thank you very much for replying but can you tell me other website in english that have pit and csc and modem because this website is russian and i understand nothing ,great thanks
Click to expand...
Click to collapse
The first link is to the pit file itself, should open up a download screen...
You don't need the csc or modem as the stock rom or .tar file should contain this... Go to Sammobile to find the stock rom for your region (you will need to register)....
thanks
ultramag69 said:
The first link is to the pit file itself, should open up a download screen...
You don't need the csc or modem as the stock rom or .tar file should contain this... Go to Sammobile to find the stock rom for your region (you will need to register)....
Click to expand...
Click to collapse
yes I see thank you but it is risky to do repartition or not because i flash my country ICS 4.0.4 without repartition and the problem of mobile disconection still persist this problem is not present in jelly bean and not present in ics before updating to jelly bean and what is repartition effect ,sorry for many question and thank you in advance
Using a pit file is risky. If the pit file you use is corrupt, not the right one for your device or has any other problems you will brick your device. Most people here will tell you that you're mad to use pit file when flashing. But hey, if you cant get ANYTHING to work, you're one step off returning it to Samsung and you have a null waranty then I say go ahead and try... You can't make it any worse....
If you don't have all the above conditions then to be honest I'd do a butt ton of research before playing around with the pit file.
Just out of interest, what was so terribly bad about Jelly Bean that you wanted to revert to ICS?
I have an N8000 with XSG and JB. I cannot fault it, and I wouldn't want to go back to ICS
answer
Bulbous said:
Just out of interest, what was so terribly bad about Jelly Bean that you wanted to revert to ICS?
I have an N8000 with XSG and JB. I cannot fault it, and I wouldn't want to go back to ICS
Click to expand...
Click to collapse
My favorite browsers doesnot support flash in jelly bean and my essential using of this tablet is internet browsing so I want to downgrade in addition I donot noticed any practical difference in performance between both version thank you for replying
My reason to return back to ICS is battery drain and mobile operator tech. service visit. My Note 10.1 needs to repair a SIM card slot issue under warranty, I need to restore as operator sold it because of warranty purposes. When it return back to me I will maintain last ICS it exist in the market. It seems to be better than JB, I also have a SGS II and battery drain is terrible when using JB, I returned to ICS and it works much better.
cocoe
You do not need to return it to how the operator sold it. If there is a update to the software pushed out by the manufacturer then warranty is still valid...
If the place you bought it off told you that they're blowing smoke up your arse trying to make it hard as possible for you to return under warranty.
If the sales rep insists then speak to their manager. You can't loose warranty by upgrading the software the Manufacturer is endorsing...
As for battery, I don't know what you are running but battery is fine on JB... I tend to find it takes a day or 2 for the rom to stabilise and battery might suffer for that small amount of time but once it does its awesome...
HELP
my device is made in vietienam please help me to return to ICS
hello guys,
this guide is meant for Galaxy S Dous and similar devices ....
as we know we dont have any guide on how to change baseband for our device without flashing full Odin package...
I have searched alot but only found that Modem.bin or modem.tar is the file that need to flashed using odin for changing baseband but our device's odin package not having any such file...
so there was no file related to such but taking courage i flashed Fat.bin using odin and voila !!
it changed my baseband so this guide will tell u how to change basebands with baseband files .....
GUIDE :->
Requirements :->
1. Odin3-v3.04
2. Fat.bin file for ur prefered baseband.
3. Samsung drivers. [ must ]
STEPS :->
1. Download odin & Fat.bin
2. Now open Odin & select PHONE & choose "fat.bin"
3. connect your phone using usb cable and phone's drivers must be installed
4. Ur phone will be detected by odin [ green color at ID:COM ]
5. Click on Start & wait until ur phone reboots
note :- only two options will be checked that are --> Auto reboot & F.reset time
Basebands :-->
S7562XXBMJ1----> https://www.mediafire.com/?2gxoc60ao3gpqfb [ Cosmic Rom Baseband Version ]
More will be added ... [ request to xda members ...if u have different firmware version then extract ur fat.bin and upload it somewhere and give me link ..]
regards,
abhi922.
HIT THANKS BUTTON IF I HELP U....
reserved
Nice guide but one doubt if I want to go back to my previous backup is it possible or I have to change baseband again
Sent from my GT-S7562 using xda app-developers app
pravin.narote said:
Nice guide but one doubt if I want to go back to my previous backup is it possible or I have to change baseband again
Sent from my GT-S7562 using xda app-developers app
Click to expand...
Click to collapse
no, backup is not possible...
u need to flash back ur baseband....
OK how to get file for my baseband
Sent from my GT-S7562 using xda app-developers app
pravin.narote said:
OK how to get file for my baseband
Sent from my GT-S7562 using xda app-developers app
Click to expand...
Click to collapse
Open ur odin package.tar.md5 using winrar
then extract fat.bin from it...
flash it using odin via above method..
Thanks . Works without any problem .
Waste of time
I tried this Rom (Cosmic) no success at all!
The changebands trick did not work either, never could make a single phone call. Wasted like three or four hours triying to make this work but I could not.
Thanks anyway. I guess I will have to be stuck on the boring stock rom.
In case anyone manages to make this work on S duos Latin America version please let me know how!!
Ccasarguedas said:
I tried this Rom (Cosmic) no success at all!
The changebands trick did not work either, never could make a single phone call. Wasted like three or four hours triying to make this work but I could not.
Thanks anyway. I guess I will have to be stuck on the boring stock rom.
In case anyone manages to make this work on S duos Latin America version please let me know how!!
Click to expand...
Click to collapse
Try installing a full stock BMJ1 a clean install.
Than try Cosmic 2.0 over it check if works.. than 2.5 update.
Make sure you are following steps right..
If still not, try another baseband. just baseband.