[Q] What should I freeze for this problem? - General Questions and Answers

I suppose I should add "if anything" to the question ...
I have a Galaxy Stellar, rooted, using Titanium Backup.
Problem is:
When I slide the pulldown menu to get access to the status bar, the help tip box pops up to explain how I can tap a button to turn a function on or off. If the "Do not show again" box is marked and I hit the OK button, there is about a 5-10 second pause and a box comes up that says "Unfortunately, System UI has stopped", after which it will go back out to the home screen and another 5-10 second pause later it all seems to go back to normal. However, if I leave the box unmarked and hit the OK button, there is no problem, except that I have to hit the OK button every time I pull the status bar down.
Is there an app and/or function that I can freeze to prevent the help tips from popping up at all? I have already frozen (and defrosted) the Help app.

you can either do a clean install, OR using root explorer (or another app that does the job), navigate to /data/data/com.android.systemui/shared_prefs and delete the file there (there should only be one file in that folder)
then just reboot and it should be fine

kickstand03 said:
you can either do a clean install, OR using root explorer (or another app that does the job), navigate to /data/data/com.android.systemui/shared_prefs and delete the file there (there should only be one file in that folder)
then just reboot and it should be fine
Click to expand...
Click to collapse
Thanks for the reply ... found the folder okay, but there were no files in it, just an empty Lib folder.
Looks like I'll have to flash back to the out of the box ROM because even the factory reset didn't fix the problem ... although it's still in the warranty period so I might bring it back to stock and return it.

Related

Sprite Backup Problem (also, which files are contacts and msgs located in??)

Ok so this morning I go to backup my phone since I haven't done it in 4 months. (I'm running an AT&T Tilt)
I open up the Sprite Backup program and set it to back up the phone. It restarts the phone (as usual) and begins the backup process on startup. Then, when it finishes, it restarts again but it won't boot up. It goes to a white error screen that says something along the lines of "A program with an unsigned cab has been installed" or something like that and says to "press the SEND button to reset the phone or any other button to cancel. This operation will delete all of your personal data and reset the phone to factory settings."
Uh-oh, I thought... So I hit another button because I don't want to lose all of my personal data. It stayed on the white AT&T screen with the R, G, and D numbers on the bottom right corner.
After resetting and taking out the battery and resetting again, nothing changed. So I popped the microSD card into my computer to see if SpriteBackup actually finished backing up the system. Hey! It was there, about 62MB in size and it was a whole file (no corruption), with today's date and the time that I backed it up. So I said, alright, let me just turn on the phone, press the SEND button to reset it, and then just restore the Backup file with SpriteBackup. I did it and it restored it, but after rebooting, the initial configuration screen for the phone kicks in again (the one that comes up when you first buy the phone) and it reinstalls the "stock" programs and settings.
Almost everything is back to normal, except:
I'm missing some contacts that I've added within the past 3 months.
I'm missing some text/MMS messages since May 19th...
In the "Remove Programs" windows, there are only 5 programs installed, the ones that come stock with the phone.
Does anyone know a solution? Or if there's a way to transfer my contacts/messages out of the SpriteBackup file to my computer, i might as well just wipe my phone clean, install an updated rom, and start from scratch.
All I need are all my contacts and my messages. Does anyone know where they are located?
Thanks in advance..

[Q] Need help. the file 'start' cannot be opened

The file 'start' cannot be opened. Either it is not signed with a trusted certificate...
I have no idea where to find this file and how to fix the situation. The error prompt pops up constantly and freezes my phone to where i have to soft reset all the time. I cannot do a hard reset on my touch pro as my friend got it wet on a canoe trip and the volume buttons are no longer of any use. It seems to only do this on newer roms as I can use the original ATT firmware just fine. I do not use a sd card to flash.
From what I've read over the internet I need this file's certificate or something or another. If this can be provided by anyone I would appreciate it. Thank you.
The message almost never has anything to do with certificates (if you're on a cooked rom, if definitely shouldn't). It usually means you have a bad shortcut, or an app is missing some files so when you try to launch it, it can't open. When do you get the message? What are you trying to start? Is it a program in the start menu, or is it something you're launching with a button.
You can always hard reset-clear storage will do it, and there are apps like sk tools that will initiate a hard reset.
It happens as soon as I turn on my phone. It's the first thing that pops up so it makes it really difficult to even do anything. I'll look around for that program for the hard reset. Thank you.
Ok, saw in the title that it's the program 'start'. Before you hard reset, look in your startup folder (\windows\startup). If there's a shortcut for something called 'start.lnk', try removing it (move it to your sd card for safe-keeping). You can also see what the shortcut points to by opening it with Total Commander, using the editor.

[Q] (HTC HD2) How do I restart Sense when it is frozen? (Without restarting device)

I have a T-Mobile HTC HD2. I do NOT want to update it or do anything that requires a factory reset. Whenever my Sense application freezes (quite often, and usually when I open a new text), I am unable to access the Settings menu to turn off or restart Sense in the Today Screen settings, because I cannot GET to the Today settings. It simply does nothing when I tap "Settings" in the start menu. If I have to restart the phone, it takes approximately 2 minutes and 30 seconds to turn back on, which is unacceptable. I want to know how to restart a frozen Sense without restarting the Device (in a minute or less). I have tried ReSense and it does not work. I have also tried looking for the Today settings application in the File Explorer, with no success there either.
Try to use CleanRAM, and select level 3. Hope this helps, Google will be your friend.
Thanks! That worked to restart Sense and speed up my phone as well.
Hi guys,
I will let my experience here...
I had a very specific kind of freeze tha happened about 3 months since the last hard reset.
This freeze occurs this way:
- Someday (i don't know how and neither why...) when my phone restarts after about 2 to 5 minutes it freeze if still on any sense screen... and nothing works, except for push windows button that make it goes to start screen... On windows screen if I wait more than a minute to do something it freezes again and I need to push windows button again, then I can go to my folders and run any program...
- sometimes it just freezes if I push lock\end button and when I try to slide the unlocker it freezes and the only thing that works again is the start button.
- If I restart my HD2 without the memory card inside I never get any freezing at all...
- The solution: I deleted (on storage card) the "HTC" folder (in the "application data" folder and every file called "device" or "album" or "thumbnail" on storage card. On restart the phone create new files and foders like that, but the freezes disapears !!!

[Q] apk files not installing

Hi there!
Not sure if this is the right section to post this...but here goes.
I've got an apk I need to install stored on my external SD card. When I press to install it the display dims and just hqngs there until I press the screen to undim it.
How is this fixed?
Thanks.
When the screen dims and just hangs it usually means that there is a choice of apps to open the file/ execute the command, but in HC there is a bug that sometimes stops the dialog box from being displayed. You just need to rotate the Xoom with auto rotate enabled and the box will pop up.
Thanks for the reply Okantomi.
I pressed the apk until the dialogue box appears which gives me the choice of how to deal with the apk file, i pressed install. it then just hangs on the dimmed screen.
I will give your advice a go, and see what happens.
Thanks again.

[Q] Pantech Flex phone Soft Keys And Status Bar are gone

Ok so i was using my Android Pantech Flex and the only reason i rooted it was to get rid of the soft keys and completly use my fullscreen, so i found this application called "Full!screen+" and also i downloaded this app called "LMT" which lets you use pie, i think its called like that to be able to just do gestures to go to home and back buttons etc. Unfortunately the Full!screen+ app got rid of the soft keys and status bar but it was no problem because i had the LMT application installed as well. The whole BIG PROBLEM STARTED WHEN I looked up a video on youtube to just remove the soft keys and be able to enable the status bar and what happened was that i got this app called ES FILE EXPLORER and went to "/system/build.prop" and at the very bottom i had to type this code "qcmu.hw.mainkeys=1" and i saved it, then i rebooted my phone. Then After the Reboot, My phone was showing this message every second saying"systemui has stopped working, i Looked it up in here and i saw a thread were it said to factory reset the phone to fix it and i did but everything got deleted no more root apps were installed But The FULL!SCREEN+ App was still activated but no longer installed? and thats when my soft keys dissapear and i still kept on getting the systemui. has stopped working, so now i cant navigate my phone to go back or press home button to go back unless i keep on rebooting. Even a font that i had installed still is actvated aswell. But Please Help ME! This has stressed me out because i just got my phone like 2 weeks ago and now i want to completly remove the root and keep it on stock rom Like a regular phone before it was rooted please Help Me i want my regular phone to be back to normal
AndroidPantechFlex said:
Ok so i was using my Android Pantech Flex and the only reason i rooted it was to get rid of the soft keys and completly use my fullscreen, so i found this application called "Full!screen+" and also i downloaded this app called "LMT" which lets you use pie, i think its called like that to be able to just do gestures to go to home and back buttons etc. Unfortunately the Full!screen+ app got rid of the soft keys and status bar but it was no problem because i had the LMT application installed as well. The whole BIG PROBLEM STARTED WHEN I looked up a video on youtube to just remove the soft keys and be able to enable the status bar and what happened was that i got this app called ES FILE EXPLORER and went to "/system/build.prop" and at the very bottom i had to type this code "qcmu.hw.mainkeys=1" and i saved it, then i rebooted my phone. Then After the Reboot, My phone was showing this message every second saying"systemui has stopped working, i Looked it up in here and i saw a thread were it said to factory reset the phone to fix it and i did but everything got deleted no more root apps were installed But The FULL!SCREEN+ App was still activated but no longer installed? and thats when my soft keys dissapear and i still kept on getting the systemui. has stopped working, so now i cant navigate my phone to go back or press home button to go back unless i keep on rebooting. Even a font that i had installed still is actvated aswell. But Please Help ME! This has stressed me out because i just got my phone like 2 weeks ago and now i want to completly remove the root and keep it on stock rom Like a regular phone before it was rooted please Help Me i want my regular phone to be back to normal
Click to expand...
Click to collapse
might just have to factory reset then you need to look up a methood to get back to stock.

Categories

Resources