[Q] problem usind odin - Verizon Samsung Galaxy S III

long story short i had a rooted from ics verizon s3 that had the cracked glass then phone was dropped and digitizer went out so instead of sending it to sammy to get fixed i had an updrage on my acct so i opted to get another s3 and this one already had jb installed, so i found a guide on this forum by usin odin, the first mistake i made was flashing the "vralec" bootchain under the bootchain tab above the pda tab, then went about flashing clockworkmod using the pda tab and now i cant get into recovery mode, when i try i get a samsung custom message and a picture of a unlocked pad lock, and everytime i boot the phone up i get the same message the boots reguarly. someone please help i wanna get all this bloatware gone and start flashing roms.
thanks in advance
Bill

silveradodmax said:
long story short i had a rooted from ics verizon s3 that had the cracked glass then phone was dropped and digitizer went out so instead of sending it to sammy to get fixed i had an updrage on my acct so i opted to get another s3 and this one already had jb installed, so i found a guide on this forum by usin odin, the first mistake i made was flashing the "vralec" bootchain under the bootchain tab above the pda tab, then went about flashing clockworkmod using the pda tab and now i cant get into recovery mode, when i try i get a samsung custom message and a picture of a unlocked pad lock, and everytime i boot the phone up i get the same message the boots reguarly. someone please help i wanna get all this bloatware gone and start flashing roms.
thanks in advance
Bill
Click to expand...
Click to collapse
Can you get back into odin/download mode? If you can then redo the guide to root/unlock/custom recovery via odin. Make sure to follow the steps exactly and only use pda. I assume you are using this guide HERE to root and unlock JellyBean.

dark_system said:
Can you get back into odin/download mode? If you can then redo the guide to root/unlock/custom recovery via odin. Make sure to follow the steps exactly and only use pda. I assume you are using this guide HERE to root and unlock JellyBean.
Click to expand...
Click to collapse
thanks i got it figured out, i used this link https://www.google.com/url?q=http://forum.xda-developers.com/showthread.php%3Ft%3D1853159&sa=U&ei=9MYkUfO0I6mN0QGdvIGIDw&ved=0CAcQFjAA&client=internal-uds-cse&usg=AFQjCNFbbP3bzyuz9d-Tjqy1ooqFS6br2A for rebooting into recovery from ADB

Related

[Q] Yellow triangle of death?

Got the yellow triangle with " unauthorized software found on your device. Return to authorized Verizon dealer." I was trying to return this to stock and the directions on Odin said the bootloader had to be locked. I took the EZunlock and locked it back then all hell broke loose. Any ideas?
ergon said:
Got the yellow triangle with " unauthorized software found on your device. Return to authorized Verizon dealer." I was trying to return this to stock and the directions on Odin said the bootloader had to be locked. I took the EZunlock and locked it back then all hell broke loose. Any ideas?
Click to expand...
Click to collapse
where did u read the bootloader had to be locked? all u need to do is odin back to stock, root, unlock bootloader.
All you need to do is download Odin, and and whatever tar file you want, boot phone into download (volume down, home, power), select yes when it asks are you sure, open Odin, select the tar file and start. Easy schmeasy
Sent from my SCH-I535 using xda app-developers app
ergon said:
Got the yellow triangle with " unauthorized software found on your device. Return to authorized Verizon dealer." I was trying to return this to stock and the directions on Odin said the bootloader had to be locked. I took the EZunlock and locked it back then all hell broke loose. Any ideas?
Click to expand...
Click to collapse
You rebooted your phone after locking the bootloader. You shouldn't have done that. Your issue isn't unfixable tho, not by any means. IIRC VRALF2 I'm pretty sure is the only stock image that doesn't re-lock the bootloader(I haven't tested all of them). If you choose VRALG1 that will re-lock the bootloader for you when you flash it, it did for me the other day when I started over.
Just boot into download mode and flash the G1 thru Odin then do a factory wipe and you should be fine. I'm 99% sure you didn't trip the flash counter doing this, someone else chime in on this please?
And make sure you use PDA mode when you use Odin and don't unplug your phone from it until it says finished(even if it says removed, let it continue rebooting and doing its thing before unplugging. The Start and Cancel buttons should 'come back to life' when it's ok)
This might be the source the OP was referring to:
http://forum.xda-developers.com/showthread.php?t=1867253&highlight=odin+to+stock
Although it clearly says to NOT reboot after re-locking your bootloader, it does say that the first step is to lock it before flashing to stock via Odin. Further down in the thread he says he'll remove it from the guide, but I don't think flashing stock via Odin locks the BL so if youre trying to return it to Verizon I would lock it first.
nghtrain88 said:
This might be the source the OP was referring to:
http://forum.xda-developers.com/showthread.php?t=1867253&highlight=odin+to+stock
Although it clearly says to NOT reboot after re-locking your bootloader, it does say that the first step is to lock it before flashing to stock via Odin. Further down in the thread he says he'll remove it from the guide, but I don't think flashing stock via Odin locks the BL so if youre trying to return it to Verizon I would lock it first.
Click to expand...
Click to collapse
Certain stock images do. I've had g1 lock and I've read that he will to.
Don't get me wrong, locking it yourself prior to flashing thru Odin is a good thing to do just to make sure. It's easier than having to re-root just to lock it then flash all over again.
Brian Gove said:
Certain stock images do. I've had g1 lock and I've read that he will to.
Don't get me wrong, locking it yourself prior to flashing thru Odin is a good thing to do just to make sure. It's easier than having to re-root just to lock it then flash all over again.
Click to expand...
Click to collapse
the only stock rom i have found that locks the bootloader is vralhd... are you sure g1 locked your bootloader because i thought we had this conversation already lol? unless your returning the device, why would you even want to lock it back up?
droidstyle said:
the only stock rom i have found that locks the bootloader is vralhd... are you sure g1 locked your bootloader because i thought we had this conversation already lol? unless your returning the device, why would you even want to lock it back up?
Click to expand...
Click to collapse
Yeah, I meant HD, not HE.
We did, but that was when I flashed F2. F2 doesn't lock it, but a week or so ago I had to flash back to stock to start over, used G1 and it re-locked my bootloader on me.
One of these days when I'm bored I'll sit down and try them all just to double check too.
cvbcbcmv said:
Don't over think it. This is simply happening because the bootloader is locked and your trying to run a custom rom. Just restore to stock and you're fine.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I am having the same issue but when I go to restore back to stock Odin says it has completed 100% but when the phone reboots I get the triangle again. Please help.
i get this very same problem with with yellow triangle when i try to flash a rom it happend to me 2 times so i had to odin back any ideas why it happens when i try to flash a rom
Bootloader is locked
Sent from my SCH-I535 using xda app-developers app
Verizon note 2 will not go into download just yellow triangle
Okay bye hope someone can help me I rooted my galaxy note 2 by Verizon with framaroot and didn't realize the boot loader was locked and try to download ROM manager and it locked my phone up all I got was a yellow triangle said that they did not recognize a program then I did Adam's way of returning to stock with casual will not read it so then I found the root66_vzw..... same as stock but rooted and unlock boot loader and I flashed it and the pit file that went with it using Odin. It said pass when everything was done it upload bar on the phone I seen it on the screen and when it went to reset then it come back to the same Verizon yellow triangle and now I can't get it to going to download mode or do anything at all except for when I plug in the cable to my computer the yellow triangle come on. Can someone help?? Please I really we'd love to have my phone back! I would appreciate it very much thank you sincerely
worknman69 said:
Okay bye hope someone can help me I rooted my galaxy note 2 by Verizon with framaroot and didn't realize the boot loader was locked and try to download ROM manager and it locked my phone up all I got was a yellow triangle said that they did not recognize a program then I did Adam's way of returning to stock with casual will not read it so then I found the root66_vzw..... same as stock but rooted and unlock boot loader and I flashed it and the pit file that went with it using Odin. It said pass when everything was done it upload bar on the phone I seen it on the screen and when it went to reset then it come back to the same Verizon yellow triangle and now I can't get it to going to download mode or do anything at all except for when I plug in the cable to my computer the yellow triangle come on. Can someone help?? Please I really we'd love to have my phone back! I would appreciate it very much thank you sincerely
Click to expand...
Click to collapse
We don't have a Note 2 go to the Note 2 forums to get help.

[Q] Stuck in ODIN mode

I tried installing a ROM i found on this forum but when i went to reboot and turn back on a warning messege appeared saying something along the lines that the OS was blocked by verizon wireless and i had to bring my phone to the nearest store. It wouldnt reboot into recovery it just kept flashing back to the messege. Im not sure what i did but i managed to boot the phone into something called ODIN mode? It asked me if i wanted to install some firmware in which i assumed was the finishing process to the ROM installation but now its just hungup at the "Downloading...Do not turn off target!!" screen. Im not sure what to do from here any help would be greatly appreciated thanks!
cvbcbcmv said:
First, relax if you're nervous. There is nothing wrong. You didn't unlock your bootloader before flashing the rom, that's why the message is there. Read some of the threads (I'm mobile so I can't link but I'm sure there stickied in one of the sections) about restoring to stock. Grab the Odin file and read a tutorial if the thread doesn't have one on how to flash it. It's just another method of flashing to stock. I would give you step by steps if I wasn't on my phone in bed, if you still need help tomorrow hit me with a pm and ill help you as soon as I get home from school. I can get you familiar with the important things about rooting and flashing on this phone.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the quick reply. Is it okay to power off the phone if it says its downloading still. And my phone used to be rooted until the OTA updated it to 4.0.4 for some reason it completely slipped my mind to unlock the bootloader again.
You aren't downloading unless you've hooked your phone to your computer and have run Odin
Sent from my SCH-I535 using xda app-developers app

[Q] ROM will not complete flash

What I have:
ATT Samsung Galaxy S2 Skyrocket
What I was doing:
Updating via Kies to JB
What Happened:
It froze or got stuck half way on upgrade via Kies. Went to recovery likes prompted but will not recovery. Samsung says mail them the phone because stuck in recovery mode.
What I have done now:
Went to XDA ! and downloaded ODIN 1.85 and stock ATT tar file per Vicom (sp). Also installed TWRP. I can get into recovery and download modes ! I tried to flash with ODIN but did not work ( would not reboot) Tried to flash with TWRP with ATT tar in my sd card. Looked like it worked but would not reboot.
What now? Any ideas?
RPHGALAXYS2 said:
What I have:
ATT Samsung Galaxy S2 Skyrocket
What I was doing:
Updating via Kies to JB
What Happened:
It froze or got stuck half way on upgrade via Kies. Went to recovery likes prompted but will not recovery. Samsung says mail them the phone because stuck in recovery mode.
What I have done now:
Went to XDA ! and downloaded ODIN 1.85 and stock ATT tar file per Vicom (sp). Also installed TWRP. I can get into recovery and download modes ! I tried to flash with ODIN but did not work ( would not reboot) Tried to flash with TWRP with ATT tar in my sd card. Looked like it worked but would not reboot.
What now? Any ideas?
Click to expand...
Click to collapse
If you have twrp, and can get to it, install the ucmc1 stock ROM by Mohan. .tar file is for Odin only. Also, read vincoms sticky again (and again)
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
FIXED
Did every thing in Vincoms procedures. Nothing worked. Talked to Samsung and they said when original update failed to complete it did not leave enough info for recovery to finish it. BUT ! Samsung said to just go to ATT Service center store ( not retail ) and have them flash phone for free back to original. Took ATT all of 10 minutes ! Phone is like new. Now why did the original Samsung rep I first talked not tell me aboyt ATT re flash? Anyway phone is fixed
RPHGALAXYS2 said:
Did every thing in Vincoms procedures. Nothing worked. Talked to Samsung and they said when original update failed to complete it did not leave enough info for recovery to finish it. BUT ! Samsung said to just go to ATT Service center store ( not retail ) and have them flash phone for free back to original. Took ATT all of 10 minutes ! Phone is like new. Now why did the original Samsung rep I first talked not tell me aboyt ATT re flash? Anyway phone is fixed
Click to expand...
Click to collapse
Question.
When they flashed your phone, did they flash it to JB? Or did they flash it to ICS and you updated it to JB? (Or neither?) The first time I tried to update my phone via Kies, the same thing happened to me and AT&T said they couldn't flash my phone. (Maybe it has to do with where you're from?) I had to send my phone to Samsung and I got it back with ICS, and I'm afraid to do the update via Kies because I don't want it to do that again, or I'll have to send it to Samsung again.
Basically, I'm trying to figure out if I can do the update safely now.
ajdearmond said:
Question.
When they flashed your phone, did they flash it to JB? Or did they flash it to ICS and you updated it to JB? (Or neither?) The first time I tried to update my phone via Kies, the same thing happened to me and AT&T said they couldn't flash my phone. (Maybe it has to do with where you're from?) I had to send my phone to Samsung and I got it back with ICS, and I'm afraid to do the update via Kies because I don't want it to do that again, or I'll have to send it to Samsung again.
Basically, I'm trying to figure out if I can do the update safely now.
Click to expand...
Click to collapse
Nothing is ever safe. Either take the risk or don't. Or just Odin it yourself instead of sending your phone away like a tard.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Nothing is ever safe. Either take the risk or don't. Or just Odin it yourself instead of sending your phone away like a tard.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Sorry, it would have probably been easier if I just linked my original thread. I used Odin, I did everything I could. It just wouldn't completely transfer, it would just do basically what this persons phone was doing from what I can tell.
I understand there's a risk, and that's why I haven't done it yet. I just figured I'd ask, I'd be a lot more comfortable doing it if it worked for him

[Q] Can anyone help me finish rooting my GS3? Made small error.

So I was going along the steps in this thread right here, working on rooting and unlocking my phone: http://forum.xda-developers.com/show....php?t=2046439
I downloaded everything, Booted into ODIN mode and flashed the VRALEC, rebooted the phone into ODIN mode and flashed the custom recovery, I have a little unlocked padlock on my loading screen now so Im assuming thats how I know it worked. Unfortunately, I forgot to uncheck "Auto-Reboot". Now I'm too scared to go any further because the post says thats a very important step...so yea. Does anyone know if it's possible to roll it back to stock condition and start from scratch? And if it is, can anyone point me in the direction of learning how to do that? Thanks.
Raindeux said:
So I was going along the steps in this thread right here, working on rooting and unlocking my phone: http://forum.xda-developers.com/show....php?t=2046439
I downloaded everything, Booted into ODIN mode and flashed the VRALEC, rebooted the phone into ODIN mode and flashed the custom recovery, I have a little unlocked padlock on my loading screen now so Im assuming thats how I know it worked. Unfortunately, I forgot to uncheck "Auto-Reboot". Now I'm too scared to go any further because the post says thats a very important step...so yea. Does anyone know if it's possible to roll it back to stock condition and start from scratch? And if it is, can anyone point me in the direction of learning how to do that? Thanks.
Click to expand...
Click to collapse
After reeboot you should see custom recovery. If not,you can just repeat the step
Sent from my Micromax A110 using xda app-developers app

unbrick?

I gues I've managed to somewhat brick my S7. I installed a bootloader I got from here, and went thru the root steps, I chose NOT to wipe data at the end of the root. Seeing as the whole point for rooting was to be able to see some files that required I root the phone in order to access. Now the phone will boot and get stuck at the T-mobile splash screen. I can still get into ODIN mode, and can reset the phone using buttons. It just gets stuck at the T-Mobile screen each time. Is there anyway to walk back from this and get the phone back to regular working order?
OdinValknir said:
I gues I've managed to somewhat brick my S7. I installed a bootloader I got from here, and went thru the root steps, I chose NOT to wipe data at the end of the root. Seeing as the whole point for rooting was to be able to see some files that required I root the phone in order to access. Now the phone will boot and get stuck at the T-mobile splash screen. I can still get into ODIN mode, and can reset the phone using buttons. It just gets stuck at the T-Mobile screen each time. Is there anyway to walk back from this and get the phone back to regular working order?
Click to expand...
Click to collapse
I think the only way is to flash official rom through ODIN
hope it can help
I'll give that a try. Not a big deal if I can't get it. My kids use it to play mobile games and such on, so they're kinda upset. But I'll mess with it some more.
Thanks for replying
OdinValknir said:
I'll give that a try. Not a big deal if I can't get it. My kids use it to play mobile games and such on, so they're kinda upset. But I'll mess with it some more.
Thanks for replying
Click to expand...
Click to collapse
once you root you have to do factory reset otherwise It wont boot
follow here to root
https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616
first odin the stock base you will get all the files here
https://forum.xda-developers.com/tmobile-galaxy-s7/development/rom-g930tuvu4cri2-t3864700
The root worked fine, but like you said it won't boot since I didn't do a factory reset at the end of it. So you're saying if I flash the stock stuff back onto it via Odin it will return to working order?
zfk110 said:
once you root you have to do factory reset otherwise It wont boot
follow here to root
https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616
first odin the stock base you will get all the files here
https://forum.xda-developers.com/tmobile-galaxy-s7/development/rom-g930tuvu4cri2-t3864700
Click to expand...
Click to collapse
There are 2 CSC files in that zip, I'm adding everything but the HOME_CSC file to odin, and getting a fail either way. Whether I add the last file or not.

Categories

Resources