I have problem with my PMP5197D Ultra,it doesn't start.
When i turn it on stucks on loading as seen on picture.
can anyone please help me?
Thank you.
So... how did you solve it?
Same issue
I am having the same issue Please some one suggest a solution :'(
u need to go to recovery do fresh install thats what i did to mine
i have the answer xD go to prestigo website load the first firmware package ! unzip it now you find 2 folder if i correct rememer !!! firmware with the img and a tool to create an sd card write with this tool the image to sd put it in your *off* device now hold power and home button until the red mirror comes now wait it makes a click noisy sound but its ok its reboot autom. now ure tab is new flashed and will work
Related
hi every one..
yesterday i downloaded the newest rom from htc which support ARABIC..
here is my steps:
1-I downloaded it,
2-extracted RUU***.nbh which size 220 MB,
3-changed the name of the file to KAISIMG.nbh
4-copied to the SD card
5-restarted in bootloader for installation
6-started progress until it reached radio or somthing
7-hanged for 10 miniutes at the same rate whith no changing in progress
8-restarted the phone
9-the device officially dead
I tried to remove the device`s battrey for 1 day,,but still nothing
PLZ HELP ME,, WHAT CAN I DO WITH IT BESIDE THOWING IT,OFCOURS ??
I have no idea about kaiser, but try get into bootloader (Hold Camera + Power buttons together and reset with stylus-Ithink) if you can then transfer another normal working rom to the sd and flash it. If you cant get it into bootloader then i think we can call it officially dead? Maybe if you search kaiser forum, there must be someone else whos had the same problem and look if they fixed it.
the problem is the device not working.. not even a power to lite the screen like if it was without a battry,, after all thanx for ur try
Hello,
I'm new to flashing and installing ROM on android phones.
I enabled root in this phone.
I wanted to install JellyBean 4.2.2.
After a long search on the internet and a lot of trying I decided to open a thread here.
My phone is Star N800 MTK6575 with Android 4.0.4.
When I tried to install ROM through recovery mode it showed me this:
"Failed to verify whole-file signature"
I tried to install ClockWorkMode Recovery without success
SP flash tool and Odin also disappointed me..
Could anyone help me please?
Maybe I did something wrong, can you please explain me step by step how to upgrade this phone?
Please help me, every answer will be appreciated.
Thank you!
I think I found the problem.
When I plug in my phone in the usb, when it's turn off and without the battery, I see it in the Device Manager appearing and then disconnecting.
I tried to change the Power Settings but it didn't help. Anyone faced this problem in the past and knows how to fix it?
Dont alter the zip,
in cwm toggle off the sign verification,then try flashing..:thumbup:
SENT FROM MONSTER ! ! !
HIT THANX OR I WILL JUST
CRY...
I don't have CWM, I have a regular android recovery mode..
I can't flash anything with it..
HELP ME PLEASE :crying:
Sel0x said:
HELP ME PLEASE :crying:
Click to expand...
Click to collapse
Hi, If u want to flash anyting from SP flash tool .Den follow these things.....Turn off ur phone with sim card,batter,and sd card out....Also make sure that u have installed mtk6575 drivers installed already....After that load everthing in sp flash tool and before clicking on download button..just press and hold volume up key and then insert usb in port...ur pc will detect the phone and install recovery or Rom........I also faced the same problem but this thing really helped me to install ROM
Hi,
Could You provide me that 4.2.2 ROM for N800 MTK6575, please.
I have a "brick" what needs a firmware...
Thanks,
Hi all:crying:
Description :
A1: The system.img.gz you applied, wasn't suiting to the firmware version installed on your tablet. Download latest Acer firmware update, copy it on a micro sd card, plug it into your Iconia, go to recovery by holding Volume up and Power button while device is turned off. Then choose apply update from sd card.
A2: If you cannot apply any Acer firmware, because you always get a partition error while installing, you should do a reboot after you get the error. A user reported that this made her/his device boot into Android again, showing the new version in settings -> info. Good luck
A3: If the A1 and A2 didn't help. Send back the device to Acer. Tell them you tried to apply an update from sd card and ended up in this bootloop. Sending device back to Acer over UPS is free. Good luck!
I failed root my AIT A1 and now im trapped in bootloap (my fault,RTFM fail.) I try find somewhere *.zip with official FW to apply it back trough recovery. Got any one advice how solve this issue? On acer.com is nothing usefull.I know how fix but cant find files witch i need....Ty for your time and LINKS...or Ideas
Help ...
I have same problem :crying:
QUOTE=MaCZalla;46183161]Hi all:crying:
Description :
A1: The system.img.gz you applied, wasn't suiting to the firmware version installed on your tablet. Download latest Acer firmware update, copy it on a micro sd card, plug it into your Iconia, go to recovery by holding Volume up and Power button while device is turned off. Then choose apply update from sd card.
A2: If you cannot apply any Acer firmware, because you always get a partition error while installing, you should do a reboot after you get the error. A user reported that this made her/his device boot into Android again, showing the new version in settings -> info. Good luck
A3: If the A1 and A2 didn't help. Send back the device to Acer. Tell them you tried to apply an update from sd card and ended up in this bootloop. Sending device back to Acer over UPS is free. Good luck!
I failed root my AIT A1 and now im trapped in bootloap (my fault,RTFM fail.) I try find somewhere *.zip with official FW to apply it back trough recovery. Got any one advice how solve this issue? On acer.com is nothing usefull.I know how fix but cant find files witch i need....Ty for your time and LINKS...or Ideas[/QUOTE]
A1-811 howto ROM backup
Well, I'd like to do a backup An original ROM. I do not know how this could be achieved. I think it would help a lot of people.
MaCZalla said:
Hi all:crying:
Description :
A1: The system.img.gz you applied, wasn't suiting to the firmware version installed on your tablet. Download latest Acer firmware update, copy it on a micro sd card, plug it into your Iconia, go to recovery by holding Volume up and Power button while device is turned off. Then choose apply update from sd card.
A2: If you cannot apply any Acer firmware, because you always get a partition error while installing, you should do a reboot after you get the error. A user reported that this made her/his device boot into Android again, showing the new version in settings -> info. Good luck
A3: If the A1 and A2 didn't help. Send back the device to Acer. Tell them you tried to apply an update from sd card and ended up in this bootloop. Sending device back to Acer over UPS is free. Good luck!
I failed root my AIT A1 and now im trapped in bootloap (my fault,RTFM fail.) I try find somewhere *.zip with official FW to apply it back trough recovery. Got any one advice how solve this issue? On acer.com is nothing usefull.I know how fix but cant find files witch i need....Ty for your time and LINKS...or Ideas
Click to expand...
Click to collapse
Have you unlocked you tablet? If you have, why not use a custom recovery (TWRP for example is a powerful yet simple to use recovery)? If you haven't, then it was a bad idea trying to root your tablet.
Please reply so that I can help.
Reupload A1-811 ROM
Can anyone reupload the original stock ROM? I want to unbrick my tab but hotfile.com link from the first page is down
Thank you
In case anyone else ends up in this thread, the solution to get an A1-811 out of a bootloop, ie. "unbrick" it, please follow the Firmwares for flashing - [EN] guide from this thread:
http://forum.xda-developers.com/android/general/acer-ax-b1-t2875894
A1-811
pls give me link dwnload custom ROM A1-811
Hi acer devils I need your help: "My acer iconia a1-811 show logo acer and then black screen".
No recovery... Nothing! Someone can help me?
extrem84 said:
Hi acer devils I need your help: "My acer iconia a1-811 show logo acer and then black screen".
No recovery... Nothing! Someone can help me?
Click to expand...
Click to collapse
I have similar but can still go into recovery. In recov the internal sdcard won't mount, so I just think the memory is fried...
Unless you're prepared to solder stuff or replace the MB I don't think there's much we can do...
nikagl said:
I have similar but can still go into recovery. In recov the internal sdcard won't mount, so I just think the memory is fried...
Unless you're prepared to solder stuff or replace the MB I don't think there's much we can do...
Click to expand...
Click to collapse
Thank you for your answer. I tried to flash, but this stupid tab continue to turn on :crying:
If i can't flash... do you know where to buy a memory to solder??
extrem84 said:
Thank you for your answer. I tried to flash, but this stupid tab continue to turn on :crying:
If i can't flash... do you know where to buy a memory to solder??
Click to expand...
Click to collapse
I honestly have no idea. I would search for partnumbers and order stuff in China (eBay)
Hi, I'm new to the forum and I hope that I asked the question in the right place
My English is bad but I hope you will understand my problem and help to solve it.
I have Prestigio MultiPad 8.0 HD PMP5588C_DUO and three days ago there was a problem. When started, freeze on boot screen and will not continue. Download on official site last firmware for i found on the internet that is the problem. Unzip, copy on sd card, put sd card in tablet, press volume up + power but nothing happens. Only freeze on boot screen and will not continue.
I hope you understand and that you will help me to solve the problem.
I have the same problem, any ideas ? You solved your problem?
https://youtu.be/NaP4fwfUd0w
Hello,
I hope it is the right place to ask for help .... The automatic system update failed and now the tablet is stuck at Android System Recovery Screen. Wipe Data / factory reset does not bring the system back, so I guess I need to upload rom / update from sd card - I got option "apply update from sd card".
So, please, help me to recover from this situation as my tablet is stuck .... I do not have or could not find the right files to use with "apply update from sd card."
Or, any links to the tutorial for updating / uploading rom for this model will help ...
Thank You very much in advance.
Kindest Regards
Lukasz
I solved the problem by uploading the rom again.
1) SPF Tool + MTEK drivers for win
2) Official ROM
Just two things:
a) if SPF throws error you need to choose upgrade firmare not download
b) you need to take off the back cover and unattach the battery otherwise it will not work
Have a nice day
Lukasz
Hi !
Thanks for confirming that you solved your problem !
I will now move your thread to the dedicated section .
Cheers
Hi everyone. Just did the solution like what Luqpa_W said but my tablet is still bootlooping on lenovo screen. There is no problem during flashing and everything seems fine during flashing. I do not really understand what is the problem with my tablet. If someone knows how to deal with it, please let me know.
_____
EDITED: My tablet just got booted! After several times of reboot, it seems working. Thanks!