Database Info

whatsapp problem on CM9

Hello!
I flashed CM9 RC2 recently and now whatsapp doesn't work. I get warning after installing it saying that custom rom might cause whatsapp not to work properly. After starting whatsapp it simply closes down.
Before CM9 RC2 i used HyperSensation Rom (2.9 i think), and it worked normally without any problems.
Is there anything i can do to get this to work besides reflashing ROM?
Thank you.

Delete the data of the app.. Un-install it and install it again that might help
Sent from my pyramid using blazing fast sonic waves

Tried that several times. Problem still persists.
EDIT: Just to report. Eventually i installed latest AOKP rom from their site (Milestone 6), and it works fine now.

ive had this same problem. I am usuing the CM9 RC2 right from the cyanogen mod website for samsung captivate ATT. if i install the AOKP rom you think it will work. and if i do whats the difference between AOKP build 40 and milestone 6.
edit: ok i installed milestone 6 and still did not work. what the hell

hshaikh said:
ive had this same problem. I am usuing the CM9 RC2 right from the cyanogen mod website for samsung captivate ATT. if i install the AOKP rom you think it will work. and if i do whats the difference between AOKP build 40 and milestone 6.
edit: ok i installed milestone 6 and still did not work. what the hell
Click to expand...
Click to collapse
AOKP builds marked with number (for example: build 40) are something like beta builds and are more likely to have bugs. Milestone builds are more stable releases.
Regarding problem with whatsapp. Seriously i dont know why is this happening. I tried searching net and found couple guys with same problem but nobody offered solution. As i said in my first post, i used hypersensation which was build on one of earlier CM9 releases and it worked fine. So i would suggest to try some earlier releases of AOKP or CM9 or some rom from XDA based on them.

could you please provide me with a link to the rom you used. i will try that one

Here is hypersensation. However i used 2.9 version based on CM9, current version is 3.1. Download is in post 2. In post 3 you can find AOKP roms, but i haven't tried these.

I am using a samsung Captivate. will this rom work for me

My guess is no. You should probably go to Samsung Captivate forum and check there. I don't know anything about Captivate.

Google wallet not working on cm10

I don't know if this is a general problem or just me but every time I change the build.prop codes then flash wallet,I reboot back up and the NFC options are gone. Im using the latest cm10 on Verizon's s3. I had wallet working on bean stock rom before this as well. Is there a different method for cm10 or is it just not available yet?

pplayz18 said:
I don't know if this is a general problem or just me but every time I change the build.prop codes then flash wallet,I reboot back up and the NFC options are gone. Im using the latest cm10 on Verizon's s3. I had wallet working on bean stock rom before this as well. Is there a different method for cm10 or is it just not available yet?
Click to expand...
Click to collapse
Which CM10 build are you using? It's my understanding that on the current build of the official CM10 NFC is not yet supported. This could be the case on the unofficial ones as well but I'm not sure.

Relentless D said:
Which CM10 build are you using? It's my understanding that on the current build of the official CM10 NFC is not yet supported. This could be the case on the unofficial ones as well but I'm not sure.
Click to expand...
Click to collapse
A nightly unofficial one released last night. 3.0.39

The only thing that is different about getting GW working on CM10 is you don't need to flash anything (except Google Wallet if you are using the .zip provided by ogdobber) and editing the build prop. NFC is currently broken on the newer CM (and all others based off of CM code) for the time being but I would imagine it would be fixed after the main bugs are all squared away.
The last unofficial build I that had NFC working was InvisibleK's 8/13 but that was before the recent MMS or RIL fixes.

Marcismo55 said:
The only thing that is different about getting GW working on CM10 is you don't need to flash anything (except Google Wallet if you are using the .zip provided by ogdobber) and editing the build prop. NFC is currently broken on the newer CM (and all others based off of CM code) for the time being but I would imagine it would be fixed after the main bugs are all squared away.
The last unofficial build I that had NFC working was InvisibleK's 8/13 but that was before the recent MMS or RIL fixes.
Click to expand...
Click to collapse
I figured it out. I was trying to use the same verizon zip file when I needed to use one specifically for aosp roms.

pplayz18 said:
I figured it out. I was trying to use the same verizon zip file when I needed to use one specifically for aosp roms.
Click to expand...
Click to collapse
Do you have a link to get it working?

pplayz18 said:
I don't know if this is a general problem or just me but every time I change the build.prop codes then flash wallet,I reboot back up and the NFC options are gone. Im using the latest cm10 on Verizon's s3. I had wallet working on bean stock rom before this as well. Is there a different method for cm10 or is it just not available yet?
Click to expand...
Click to collapse
if you took the time to read the notes on the release, you would see that it is not supported yet.
Since you did not, now you will likely have a ton of people telling you to read next time.
NFC DOESNT WORK. THEREFORE NOTHING THAT RELIES ON IT WORKS.
Its a piece of hardware, that does not FUNCTION yet.

did you also figure out that NFC doesn't work on any CM10 build yet so it doesn't matter what you flash?

Not to thread jack... but...
It's been quite a few days without any action on this thread and NFC is one thing I'd really like to try out. With that said I love CM10, currently running the 8-27 nightly without any other issues and love it... NFC isn't that important that I'd go back to a TW/Stock Rom for it.
Any word from the CM guys on when/if the rils and NFC functionality will be fixed up? Patiently waiting and love everyone working on CM10 D2VZW! :good:

Flashed the 8-31 nightly and NFC just greys out after ticking the box still. Wake me up when September comes
Sent from my R00T3D/UNL0CK3D SGS3 running CM10 nightlies

I was reading in the official CM10 thread that someone had developed a fix and that it would soon be implemented into the Nightlies
Edit:
http://forum.xda-developers.com/showpost.php?p=30952627&postcount=1317

[Q] rom suggestion?

Hey all, I've been running CM10 on my One X for a while and have had some issues. I'm stuck on a nightly from about 6 weeks ago because every time I update to a newer nightly the wifi stops working. The version I'm on works ok, but the camera is often laggy and sometimes causes the phone to lock up and sometimes the actual phone app stops responding. I also recently tried to update to the CM10.1 nightly but that went rather badly (would not boot) and I had to go back to my safe nightly.
Does any have suggestions on a stable, fast, non sense/close to stock JB rom?

chadcf said:
Hey all, I've been running CM10 on my One X for a while and have had some issues. I'm stuck on a nightly from about 6 weeks ago because every time I update to a newer nightly the wifi stops working. The version I'm on works ok, but the camera is often laggy and sometimes causes the phone to lock up and sometimes the actual phone app stops responding. I also recently tried to update to the CM10.1 nightly but that went rather badly (would not boot) and I had to go back to my safe nightly.
Does any have suggestions on a stable, fast, non sense/close to stock JB rom?
Click to expand...
Click to collapse
All the sense jb rims are pretty much close to stock but some have more tweaks than others ... Theyre all great go check them out! I personnaly use viper xl at the moment and I'm happy
---------- Post added at 06:35 AM ---------- Previous post was at 06:34 AM ----------
I do suggest close to stock hatka or clean Rom!

Best Rom threads are frowned upon on xda.
Try some roms and find one that works best for you.
Closed
XDA Moderator

[Q] Which CM version works best?

So I'm trying to prolong the use of this tablet but keep it stable and quick, and I think CyanogenMod is the way to go. There are a number of versions available for it, with 10.0 being the last stable build that I can find. I flashed 10.0 and it was quick and stable, except for one major problem: the Google+ app just would not load no matter what, and by searching I found others had the same issues with no fix.
So I'm back to stock 4.1.2 JB now, which is fine but I'd rather move to CM if I can. I flashed the latest nightly, but was having major issues with Gapps closing and the Play Store wasn't even available (even though I flashed the correct Gapps package).
For those that are using CM, which version is the best to use? Any help would be much appreciated, thanks!

Honestly, I use the CM11 builds and they are working great.
XOOM XOOM!

slinky317 said:
So I'm trying to prolong the use of this tablet but keep it stable and quick, and I think CyanogenMod is the way to go. There are a number of versions available for it, with 10.0 being the last stable build that I can find. I flashed 10.0 and it was quick and stable, except for one major problem: the Google+ app just would not load no matter what, and by searching I found others had the same issues with no fix.
So I'm back to stock 4.1.2 JB now, which is fine but I'd rather move to CM if I can. I flashed the latest nightly, but was having major issues with Gapps closing and the Play Store wasn't even available (even though I flashed the correct Gapps package).
For those that are using CM, which version is the best to use? Any help would be much appreciated, thanks!
Click to expand...
Click to collapse
CM10.1 (based on 4.2.x) really great. I used it for the past few months.
Never give me problem. Of course you must install 2/20/13 JB Unified GApps.
Looking forward to try CM11 but having hard time with TWRP (big part) at the moment.

TheMan0790 said:
Honestly, I use the CM11 builds and they are working great.
Click to expand...
Click to collapse
Another vote for CM11, but you do have to install BigPart. That isn't a big deal if you read carefully through the resource thread before proceeding. I'm certainly not a tech wizard (color TV and phones without dials were big deals when I was a kid, VCRs didn't come out until I was in college, and I was in my mid twenties when home computers just started to become widespread) and was able to run BigPart without trouble.

I got BigPart working successfully with no problems on the first go. Merely requires some reading and should work fine.
Break me off a piece of that Kit-Kat ROM!

[Q] lets make a list of ROMS for TeamWin Recovery Project 2.7.1.0(kitkat Bootloader))

Can we start a list of sorts with Roms that work with the new bootloader?? so far i read that Dhacker29 has a few test builds of cm11 . i have one installed right now and it has some bugs but works and is faster than my hd has ever been . i can run this game i like and before it couldnt play without lagging now it runs crazy fast . anyway thank you Dhacker29 for the recovery and rom. i was reading another site and someone mentioned another dev that had a test build out for the new recovery but i cant for the life of me find or remember who it was. also how can i tell if a rom will work without trying to install it. i read that the kernel had to be 3.5 and newer or some shshhsh. anyway thanks in advance to anyone that responds

I second this. Was actually thinking of suggesting the same thing. Might help keep people from flashing the JB kernel Roms and asking what they did wrong. Least maybe a bit more.
>.>

almost forgot
heres a link to Dhackers Test rom that im using . it has a few minor bugs but all the hardware works soo
http://androidhosting.org/Devs/Dhacker29/msm8960/cm-11-20140619-UNOFFICIAL-RAZR-HD_M-KITKAT-TEST.zip
i hope its ok to do this anyway Thanks Dhacker29!!!!

http://androidhosting.org/Devs/Dhacker29/msm8960/
here's the whole directory with all his builds and where I think he adds them

I believe there is a PACMan Alpha out as well. Has the same bugs as CM11

cmh714 said:
I believe there is a PACMan Alpha out as well. Has the same bugs as CM11
Click to expand...
Click to collapse
i would love to have pacman rom on here!! i read that you cant downgrade your bootloader is this true or is that only apply to locked bootloaders?

JohnnyMcG said:
Can we start a list of sorts with Roms that work with the new bootloader?? so far i read that Dhacker29 has a few test builds of cm11 . i have one installed right now and it has some bugs but works and is faster than my hd has ever been . i can run this game i like and before it couldnt play without lagging now it runs crazy fast . anyway thank you Dhacker29 for the recovery and rom. i was reading another site and someone mentioned another dev that had a test build out for the new recovery but i cant for the life of me find or remember who it was. also how can i tell if a rom will work without trying to install it. i read that the kernel had to be 3.5 and newer or some shshhsh. anyway thanks in advance to anyone that responds
Click to expand...
Click to collapse
Any stable builds? Maybe some that use stock and then tweak it out.

i think you can install the stock files and then root and use a root app manager to remove all the bloatware from your phone. there is even a thread that tells you all the apps you can get rid of without jacking anything up. here you can check it out
http://forum.xda-developers.com/showthread.php?t=2756195

spapesh said:
Any stable builds? Maybe some that use stock and then tweak it out.
Click to expand...
Click to collapse
after root you can download xposed installer and then download one of the customizing modules and you can then change your icons in the status bar. nav bar, even alter the way your toast messages come in . anything you can think change the color of your wifi and 4g icons or change them to something entirely diff . here check that out too . you probably already know all this already but just in case.
http://forum.xda-developers.com/xposed/xposed-installer-versions-changelog-t2714053

JohnnyMcG said:
i think you can install the stock files and then root and use a root app manager to remove all the bloatware from your phone. there is even a thread that tells you all the apps you can get rid of without jacking anything up. here you can check it out
http://forum.xda-developers.com/showthread.php?t=2756195
Click to expand...
Click to collapse
This is what I did. I was already running stock KK before rooting/unlocking. Still running it now but I removed a lot of crap. I'm looking forward to at least a few stable ROMs to try out on this phone, but I'm cool with this for now.
Sent from my DROID RAZR HD using Tapatalk

Does anyone know if the available KK-bootloader roms work on xt925? I know the ROM unification for a lot of devices have taken place. I am not sure this also happens with the new KK-bootlader, or if we are back on the old xt925 vs xt926 compatability devide...
Thanks in advance.

idless said:
Does anyone know if the available KK-bootloader roms work on xt925? I know the ROM unification for a lot of devices have taken place. I am not sure this also happens with the new KK-bootlader, or if we are back on the old xt925 vs xt926 compatability devide...
Thanks in advance.
Click to expand...
Click to collapse
not sure . you can ask Dhacker29 he is the one that made the recovery I think. or you can post your question in this thread and you might get a better response
http://forum.xda-developers.com/showthread.php?t=2776515

Here is a Gummy rom that supports the 3.4 kernel.
https://mobile.twitter.com/dhacker29/status/480220911225036800
Source: http://forum.xda-developers.com/showpost.php?p=53609374&postcount=2913
So far I know of these Roms that are being developed to run on 3.4 kernel
CM11 Unofficial: http://androidhosting.org/Devs/Dhacker29/msm8960/
PAC-man Alpha 1: http://forum.xda-developers.com/showthread.php?t=2683962&page=3 I read mention that this works but I've not tested it myself
Gummy Rom Nightly: https://mobile.twitter.com/dhacker29/status/480220911225036800 <-- using this right now. Seems pretty good.
full list like CM11 unofficial http://androidhosting.org/Devs/Gummy/moto_msm8960/NIGHTLY/
NexesqueKK 0.01: http://www.droidrzr.com/index.php/t...2-droid-nexesque-for-razr-hd-beta-442-builds/ I saw on DroidRZR.com that there was a test for the 3.4 kernel but my attempts to flash it failed
Beanstalk Nightly (Kitstalk): http://www.droidrzr.com/index.php/topic/35880-rom442kit-katunofficalxt926-beanstalk/ flashed the 6-23 one on my phone.. Seems to be working

wow
I thought I was decent at finding info online but i couldn't find any of those threads except for the pacman alpha but for the life of me I can't find where to download the alpha build I can find the nightly n the 4.3 but alas no alpha maybe its under one of the devs tabs instead of the pacman tab idk anyway thanks a lot for all the great info

Jaysp656 said:
Here is a Gummy rom that supports the 3.4 kernel.
https://mobile.twitter.com/dhacker29/status/480220911225036800
Source: http://forum.xda-developers.com/showpost.php?p=53609374&postcount=2913
So far I know of these Roms that are being developed to run on 3.4 kernel
CM11 Unofficial: http://androidhosting.org/Devs/Dhacker29/msm8960/
PAC-man Alpha 1: http://forum.xda-developers.com/showthread.php?t=2683962&page=3 I read mention that this works but I've not tested it myself
Gummy Rom Nightly: https://mobile.twitter.com/dhacker29/status/480220911225036800 <-- using this right now. Seems pretty good.
full list like CM11 unofficial http://androidhosting.org/Devs/Gummy/moto_msm8960/NIGHTLY/
NexesqueKK 0.01: http://www.droidrzr.com/index.php/t...2-droid-nexesque-for-razr-hd-beta-442-builds/ I saw on DroidRZR.com that there was a test for the 3.4 kernel but my attempts to flash it failed
Beanstalk Nightly (Kitstalk): http://www.droidrzr.com/index.php/topic/35880-rom442kit-katunofficalxt926-beanstalk/ flashed the 6-23 one on my phone.. Seems to be working
Click to expand...
Click to collapse
Gummy rom tested on my xt925. Stuck at unlocked bootloader sign. I don't think xt925 is supported yet.

Yeah I don't know if any have xt925 support or not. Hopefully they will include them eventually.

Gummy Rom
I recently tried Gummy Rom for 3.4 kernel. It was pretty good, but had trouble with bluetooth freezing the phone and wifi dropout at times. It has great progress, and appreciate those who are working on it. :good:

I have installed dhacker's 4.4 cm build from 24/6. Happy to report that it boots - and so far, at least - works great. This is on an xt925! It's the first 4.4 bootloader rom other than moto that I have got to actually boot up on this phone.

I installed gummy and have been using the auto updater running nightlies right now I'm running 6-24 build . it seems like the the previous ver. had fixed the screen dimming issue but it seemed to come back on this ver. but rarely happens I haven't tied Bluetooth yet and the popping/static sound issue is still there but other than that I like the rom . thanks for
Sent from my DROID RAZR HD using Tapatalk

In droidrzr forums there is an Unofficial Omni Rom for kitkat bootloader..
btw, for xt925, dhacker says that we only need the new bootloader (maybe installing the leaked soak test from France we can use the newest roms)