Database Info

[A700] [HowTo] Update German Version to JB

Hi!
Just found a way to update to JB from the 1.053 version (Acer_AV043_A700_RV22RC03_EMEA_DE) on wich every other update failed for me. But runs with the other versions, too.
Unlock Bootloader
Install CWM (6.0.1.4)
Visit this german forum
get the file A700 JB Full ROM AV051_1.028.00_EMEA_DE RV09RC02.zip
flash it via CWM
DONE!
Just tested and it's working.
Credits go to those who deserve it.
I deleted CWM and a mate let it where it was and both A700 are running fine [*] (see below!)
... now waiting for root
----------------------------
[*] New info:
My friend, who kept CWM, unlocked the bootloader again after the update and now has a bootloop. So my advice is to kill CWM after the update.
I don't get into recovery too (with locked bootloader) it says "recovery image verified failed". But system starts normally afterwards.
------------------
More info:
I had CWM on the tab too, because i misunderstood the question:
When asked
Code:
ROM may flash stock recovery on boot. Fix?
No
No
No
Yes - Disable recovery flash
say NO! to kill CWM.
------------------
Still more info to come:
(4.10.2012)
The bootloop was fixed by flashing a propriate recovery after beeing able to enter fastboot using the right key combination.
andiby left us a JB stock recovery: recovery.img and he build a CWM 6.0.1.4 with JB Kernel: recovery-a700-6014JB.img which runs fine for me.
Use the CWM with JB Kernel only to flash files and not to WIPE, FORMAT or RESTORE a backup, because there were issues with a different JB based CWM and I can't guarantee this one to work, because I have not tested it.

I'm on FR Firmware, can you tell me how should I proceed?

If you want to keep the FR firmware you will have to wait for an appropriate update file.
If you want to switch to Germen I think it should work with this method, because the zip file contains everything from bootloader to system files.

Do you think I can here: https://app.dumptruck.goldenfrog.com/p/GOKKb2PavJ download an install then install Acer_A700_AV043.RV07RC03_AV043.RV07RC06_EMEA_DE thereafter this here JB?

I would not recommend it, because your file is only 340 MB while the one from the thread above is nearly 400 MB.
I think you only need the file from my post, because there is everything in it fpr JB afaik, but I can give no guarantee, because I only used it to update my German version.
PS: Might it be posible to reduce the size of your signature a bit? Threads are much more difficult to read if a signature is almost always larger than a normal post. Thank you to give consideration to my request.

DЯΦ[email protected]П said:
I would not recommend it, because your file is only 340 MB while the one from the thread above is nearly 400 MB.
PS: Might it be posible to reduce the size of your signature a bit? Threads are much more difficult to read if a signature is almost always larger than a normal post. Thank you to give consideration to my wish.
Click to expand...
Click to collapse
Yes but i can from FR Firmware to DE and install first update (5MB) and this is 1.053 => finally JB or i think wrong?
PS: Nope. These are my projects

update or flash total
Is it an upgrade or full flash?
Did you delete all data you had or upgrade your system?

elunico32 said:
Is it an upgrade or full flash?
Did you delete all data you had or upgrade your system?
Click to expand...
Click to collapse
It's an update. Everything is on the tab as before.
@DakiX: all I can say is that I would not recommend using this method with any other file than the one mentioned in the first post, because this is the one I tested.

Thank
Thank you. I will flash now.

DЯΦ[email protected]П said:
@DakiX: all I can say is that I would not recommend using this method with any other file than the one mentioned in the first post, because this is the one I tested.
Click to expand...
Click to collapse
You don't understand me what i mean. I will flash the DE Firmware afterthat 1.053 und then the JB!
Are you from germany?

DakiX said:
You don't understand me what i mean.
Click to expand...
Click to collapse
Maybe ...
I will flash the DE Firmware afterthat 1.053 und then the JB!
Click to expand...
Click to collapse
I just don't get why you want to flash anything else before the "A700 JB Full ROM AV051_1.028.00_EMEA_DE RV09RC02.zip" because it is a FULL ROM and should be flashable over ICS 1.023, ICS 1.027, ICS 1.053 and ICS 1.055 to get JB 1.028.
Are you from germany?
Click to expand...
Click to collapse
My flag says: yes

You have a PM

Works great ! Thanks !
But for me, recovery 6.0.1.4 is KO after the update. I need to use the one with "the brick bug". Not good at all
I will wait for Pawitp before using it...

ROM may flash stock recovery on boot. Fix?
No
No
No
Yes - Disable recovery flash
Yes or no?

DakiX said:
ROM may flash stock recovery on boot. Fix?
No
No
No
Yes - Disable recovery flash
Yes or no?
Click to expand...
Click to collapse
I disabled it, then CWM is away and the Tab as stock as possible.
A friend kept CWM and now has some issues...

HOLY *%/***** i had FR Firmware and i do this:
download jb
move to sd
unlock bootloader
root with patched-boot
flash cwm
reboot to recovery
install jb..
yes disable recovery..
reboot system now & FINALLY JELLY BEAN :good: oh my... its very fast + smooth and equal to another tablet!
I hate to root and flash 10 inch tablets - i'm am smartphone fetishist

DakiX said:
HOLY *%/***** i had FR Firmware and i do this:
download jb
move to sd
unlock bootloader
root with patched-boot
flash cwm
reboot to recovery
install jb..
yes disable recovery..
reboot system now & FINALLY JELLY BEAN :good: oh my... its very fast + smooth and equal to another tablet!
I hate to root and flash 10 inch tablets - i'm am smartphone fetishist
Click to expand...
Click to collapse
Can you get into recovery mode using "adb reboot recovery"?

Nope.. failed but its understandable because CWM must be made for 4.1.1

DakiX said:
Nope.. failed but its understandable because CWM must be made for 4.1.1
Click to expand...
Click to collapse
But you kicked CWM and should have stock recovery now. Thats what you did by sayin "yes" or am i completely wrong?

DЯΦ[email protected]П said:
But you kicked CWM and should have stock recovery now. Thats what you did by sayin "yes" or am i completely wrong?
Click to expand...
Click to collapse
Yes i disable it. I can in stock recovery but CWM is gone^^ that i mean :highfive:

[Q] Problem with one s

Hello, i have htc one s.
The main problems is that he wont start....after screen HTC one .... it restart by imself....
I tried with volume down + power, and reset to factory... what next ?

Did you install a custom recovery, or have you rooted your phone?
Gesendet von meinem One S

onesvip said:
Did you install a custom recovery, or have you rooted your phone?
Gesendet von meinem One S
Click to expand...
Click to collapse
Hello... no, phone has a stock firmware... not rooted..

mk.dblade said:
Hello... no, phone has a stock firmware... not rooted..
Click to expand...
Click to collapse
Can you boot into bootloader? Then go fastboot.
On your pc install the google sdk then open a prompt comand window and type "fastboot getvar cid".
Paste what you got here with the CID someone can find for you the correct RUU for you. This means you can restore the phone.
An other way is flashing a custom recovery wiping and installing a custom ROM there are a lot sense roms and if you like personalization the new viper 3.0 based on 4.2.2 and sense 5.0 is out. If you prefer stock android look come try my RM in the development forums Have a nice day.
-phoenixita

[Q] Can't update

Hello,
I can't update to the newest cm12s update 12.0 YNG1TAS2I3. I get an error which I have added as an attachment. How can I solve this? Thanks a lot.

Download the zip again
Transmitted via Bacon

yashshan said:
Download the zip again
Transmitted via Bacon
Click to expand...
Click to collapse
How to do that? the only option i have is to install the update again.

I meant download the zip file again from where u had downloaded
Transmitted via Bacon

They have an OTA somewhere on OnePlus's forums. Just Google search it. Download the .zip and install through recovery. Should work
Sent from my A0001 using XDA Free mobile app

pronkjuweel said:
How to do that? the only option i have is to install the update again.
Click to expand...
Click to collapse
Use Dateimanager: Android - data - com.cyngn.fota - cache
Delete this file and go to settings - about device - software update - update now
It should download update again.
Gesendet von meinem GT-N8000 mit Tapatalk

I deleted the file, downloaded it again, tried to install it and it failed again showing the same message. When i navigate to the file with TWRP and manually flash it, it gives the error message in the attachment below.

pronkjuweel said:
I deleted the file, downloaded it again, tried to install it and it failed again showing the same message. When i navigate to the file with TWRP and manually flash it, it gives the error message in the attachment below.
Click to expand...
Click to collapse
Don't want be rude, but this error was asked multiple times in the past 2 weeks and there are already at least 5 threads opened with this question and exact screen. First of all, you can not OTA update with TWRP, only with Cyanogen recocery. Either that or dowload the full ROM and flash it.

davebugyi said:
Don't want be rude, but this error was asked multiple times in the past 2 weeks and there are already at least 5 threads opened with this question and exact screen. First of all, you can not OTA update with TWRP, only with Cyanogen recocery. Either that or dowload the full ROM and flash it.
Click to expand...
Click to collapse
All the other OTA's could update with no problem at all when I had TWRP installed. This is the first time I encountered a problem. If you think stock cyanogenmod recovery will help, how do I put it back?

pronkjuweel said:
All the other OTA's could update with no problem at all when I had TWRP installed. This is the first time I encountered a problem. If you think stock cyanogenmod recovery will help, how do I put it back?
Click to expand...
Click to collapse
Then something was wrong, cause based on that screen you are still on Android 4.4.2 (fingerprint).
It is better to flash the full ROM, not the delta: CN-12.0-YNG1TAS2I3-bacon-signed-FULL.zip
This can be flashed also from TWRP.

davebugyi said:
Then something was wrong, cause based on that screen you are still on Android 4.4.2 (fingerprint).
It is better to flash the full ROM, not the delta: CN-12.0-YNG1TAS2I3-bacon-signed-FULL.zip
This can be flashed also from TWRP.
Click to expand...
Click to collapse
That's strange, I was running lollipop. I have downloaded and installed the link you gave. It worked, Thanks a lot! ďakujem! (yes I did google translate that )

pronkjuweel said:
That's strange, I was running lollipop. I have downloaded and installed the link you gave. It worked, Thanks a lot! ďakujem! (yes I did google translate that )
Click to expand...
Click to collapse
Good to hear it worked Yes, GTranslate can do wonders

Back to start - firmware, unroot

Hey guys,
i wanted to update my phone, but since my mate rooted it it couldn't install the update.
I did an factory reset and some other stuff like trying to get it unrooted via SuperSU which is now deinstalled. I checked if my phone is still rooted but it says that the root isn't properly installed.
All i want is that my phone is back to standard. No root, no unlocked bootloader etc.
Can u guys help me out?
Greetings

Eppok said:
Hey guys,
i wanted to update my phone, but since my mate rooted it it couldn't install the update.
I did an factory reset and some other stuff like trying to get it unrooted via SuperSU which is now deinstalled. I checked if my phone is still rooted but it says that the root isn't properly installed.
All i want is that my phone is back to standard. No root, no unlocked bootloader etc.
Can u guys help me out?
Greetings
Click to expand...
Click to collapse
get B120 very first ROM flash via 3btn ...
then if u want lock your bootloader then after that go to fastboot and type fastboot oem lock

XDADEVX said:
get B120 very first ROM flash via 3btn ...
then if u want lock your bootloader then after that go to fastboot and type fastboot oem lock
Click to expand...
Click to collapse
so, dload to sdcard and then just flash it via 3btn?

Eppok said:
so, dload to sdcard and then just flash it via 3btn?
Click to expand...
Click to collapse
yaaas

XDADEVX said:
yaaas
Click to expand...
Click to collapse
ok, in tried it but somehow this does not work. its not installing anything neither can i update my phone afterwards.
is there any other thing i could do?

Sounds like you might have installed twrp or some other custom recovery. You need the stock recovery to update. It's got a thread here somewhere..
Sent from my Huawei Ascend Mate 7 using Tapatalk

Eppok said:
ok, in tried it but somehow this does not work. its not installing anything neither can i update my phone afterwards.
is there any other thing i could do?
Click to expand...
Click to collapse
yeah firstly flash stock recovery if u are on custom .. if you running any lolipop u have to flash B300 first and then b120

can i know how to flash back to stock recovery ?

kotty said:
can i know how to flash back to stock recovery ?
Click to expand...
Click to collapse
Well if u even don't know how to flash then u never flashed custom right ? So your phone has stock recovery I presume..
Turn phone off then hold volume up and then press power btn and hold it both for 10 secs and wait what will comes up.. let me know..

found the thread to flash back stock recovery .thanks

XDADEVX said:
get B120 very first ROM flash via 3btn ...
then if u want lock your bootloader then after that go to fastboot and type fastboot oem lock
Click to expand...
Click to collapse
fastboot oem lock not working on my phone,is it must be original rom?
Sent from my HUAWEI MT7-L09 using Tapatalk

demirozu69 said:
fastboot oem lock not working on my phone,is it must be original rom?
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
No it has nothing to do with rom.. try stock recovery maybe?
But I think u can't relock it..

I tried it it gave error
Sent from my HUAWEI MT7-L09 using Tapatalk

Hi guys, I am on b137sp03 and rooted. No custom recovery. How can I get the ota to the 5.1.1 huawei ROM?

dekraan said:
Hi guys, I am on b137sp03 and rooted. No custom recovery. How can I get the ota to the 5.1.1 huawei ROM?
Click to expand...
Click to collapse
You will have to wait bro, roll out is based on imei numbers. You can flash the whole lollipop rom as an update though.
Verstuurd vanaf mijn HUAWEI MT7-L09 met Tapatalk

gee201201 said:
You will have to wait bro, roll out is based on imei numbers. You can flash the whole lollipop rom as an update though.
Verstuurd vanaf mijn HUAWEI MT7-L09 met Tapatalk
Click to expand...
Click to collapse
Ah great! So no additional steps required? And what if I was sporting a flashy custom recovery?

gee201201 said:
You will have to wait bro, roll out is based on imei numbers. You can flash the whole lollipop rom as an update though.
Verstuurd vanaf mijn HUAWEI MT7-L09 met Tapatalk
Click to expand...
Click to collapse
It's better if you install full rom b324 .. 5.1.1

XDADEVX said:
It's better if you install full rom b324 .. 5.1.1
Click to expand...
Click to collapse
Isn`t that what i said with flashing the whole lollipop rom?

gee2012 said:
Isn`t that what i said with flashing the whole lollipop rom?
Click to expand...
Click to collapse
I don't know .. why ?

Because repeating each other is a waste of bandwith and energy imo

[Rom] Tizen Rom V2.0 Nougat H850 20A OPEN EU Fast and Stable [03.12.2016]

Today, I shares my new rom to all of you. I hope you will enjoy with it
Changelog
- Base rom H850 20a OPEN EU
- Aroma Installer
- Debloat app System
- Set Wallpaper LG V20
- Set Lockscreens LG 20
- Add Dobly option in music setting
- Add Home UX4, with add widget on Smart bulletin
- Add Google Caculator in LG V20 rom
- Add LGEmail.apk
- Add LGTask.apk
- Transperant widget on Home UX5, UX4
- Navigation bar 32 height
- Sync Navigation and Status bar color system apps
- Add Smart Doctor
- Rooted after flash rom
- More.....
INSTALLATION GUIDE
- LGup for updated to Nougat 7.0
- Install TWRP Recovery 3.0.2.1 : TWRP (thanks @jcadduono)
- Download rom : https://drive.google.com/file/d/0Bxzxv3DgqkRbOFRnVmZNRU05Ym8/view?usp=sharing
MD5 : d11967d28e9f8e53d3f1c155bbe7d927
- Copy to Internal storage or ext sdcard
- Enter to recovery
- Install rom and follow steps in aroma installer
- Reboot
- Setup and Enjoy
Thanks :
- @jcadduono
- @superr for kitchen
Bonus : UI with power off screen (upper left), Screen capture (upper right) and center clock. Flash through recovery, no wipe :
https://drive.google.com/file/d/0Bxzxv3DgqkRbeWtXLVdtUWZlR1k/view?usp=sharing
Note :
- Sorry with my bad English
- I AM NOT RESPONSIBLE FOR ANY DAMAGES THAT MAY CAUSE YOUR DEVICE
- Free for donate
Thanks All

You really made another thread just for an update you made on your ROM instead of updating this thread?
http://forum.xda-developers.com/lg-g5/development/rom-tizen-rom-nougat-h850-20a-vdf-date-t3507336/
And i almost see no change in these two, except the base, and maybe some minor things...

problem after install...
Hello, I have a problem, after installing and restart always returns to TWRP recovery and does not start the rom. How can I solve it please? Thank you.

saitek59 said:
Hello, I have a problem, after installing and restart always returns to TWRP recovery and does not start the rom. How can I solve it please? Thank you.
Click to expand...
Click to collapse
Enter twrp recovery, mount, check system, data
And flash dm verify files

cdanthien said:
Enter twrp recovery, mount, check system, data
And flash dm verify files
Click to expand...
Click to collapse
thanks... the result is the same ... I even installed the another rom and the same thing happens ... after the LG image always comes back to TWRP...

saitek59 said:
thanks... the result is the same ... I even installed the another rom and the same thing happens ... after the LG image always comes back to TWRP...
Click to expand...
Click to collapse
backup your data in internal storage, copy rom to external card. enter TWRP recovery, mount, format data. Then flash dm-verify files. Reboot in recovery again, in mount, check tick system, data.
Now you can flash rom

great ROM. works perfect.:good:

cdanthien said:
backup your data in internal storage, copy rom to external card. enter TWRP recovery, mount, format data. Then flash dm-verify files. Reboot in recovery again, in mount, check tick system, data.
Now you can flash rom
Click to expand...
Click to collapse
I do not understand "Then flash dm-verify files"...

saitek59 said:
I do not understand "Then flash dm-verify files"...
Click to expand...
Click to collapse
flash SuperSU and should be the same

saitek59 said:
I do not understand "Then flash dm-verify files"...
Click to expand...
Click to collapse
Flash this file
https://idlekernel.com/fun-stuff-trust-me/no-verity-opt-encrypt.zip

cdanthien said:
Flash this file
https://idlekernel.com/fun-stuff-trust-me/no-verity-opt-encrypt.zip
Click to expand...
Click to collapse
Impossible ... everything installs well but on rebooting for the first time after installing the rom always comes back to twrp ... I do not know what I can do

solved, I have reinstalled the rom original and I started of 0 following the manual. Thanks to all and excellent rom.

saitek59 said:
Impossible ... everything installs well but on rebooting for the first time after installing the rom always comes back to twrp ... I do not know what I can do
Click to expand...
Click to collapse
I had a similar issue and had to LGUP a clean 20a, then root/install TWRP and now Tizen v2.0 running nicely - looks good and I like the transparent widgets on the homepage especially!

Gmobilize said:
You really made another thread just for an update you made on your ROM instead of updating this thread?
http://forum.xda-developers.com/lg-g5/development/rom-tizen-rom-nougat-h850-20a-vdf-date-t3507336/
And i almost see no change in these two, except the base, and maybe some minor things...
Click to expand...
Click to collapse
Yeah, some people want the old version, some want the new. And CyanogenMod doesn't update an old thread whenever they update to a new version.

nima0003 said:
Yeah, some people want the old version, some want the new. And CyanogenMod doesn't update an old thread whenever they update to a new version.
Click to expand...
Click to collapse
I would understand, but it is barely an update, thats my point, with cm its done because of each ROM having different android versions, imo in this case ita quite pointless just to fill the dev section.

Gmobilize said:
I would understand, but it is barely an update, thats my point, with cm its done because of each ROM having different android versions, imo in this case ita quite pointless just to fill the dev section.
Click to expand...
Click to collapse
Yes, this ROM is based on Android 7 and the precious version was based on 6.

nima0003 said:
Yes, this ROM is based on Android 7 and the precious version was based on 6.
Click to expand...
Click to collapse
seriously i dont wanna get rude but wtf, where do you see android 6?
http://forum.xda-developers.com/lg-g5/development/rom-tizen-rom-nougat-h850-20a-vdf-date-t3507336/

Do i have to Update to Nougat First over LG up when coming from genesis 1.3 marshmallow?
Our can I maybe just flash the New bootloader?
Gesendet von meinem LG-H850 mit Tapatalk

Rallyharry said:
Do i have to Update to Nougat First over LG up when coming from genesis 1.3 marshmallow?
Our can I maybe just flash the New bootloader?
Gesendet von meinem LG-H850 mit Tapatalk
Click to expand...
Click to collapse
flash new bootloader and modem first, then flash ROM
but I do suggest an update to N via LGUP first

Gmobilize said:
seriously i dont wanna get rude but wtf, where do you see android 6?
http://forum.xda-developers.com/lg-g5/development/rom-tizen-rom-nougat-h850-20a-vdf-date-t3507336/
Click to expand...
Click to collapse
Oh, I never knew that existed, I was talking about the 6 version thread.