Database Info

[Flash SBF] OFFICIAL RELEASE | Android Froyo 2.2.2 [UK]

System version :
Version.34.177.3MB525.Retail.en.GB
APflex version :
GAS_EMEA_USAJRDNFRYORTGB_P019
Build number :
JOREM_U3_3.4.2_177-3
Android version
2.2.2
Full SBF :
http://www.mediafire.com/?op47dv8yo8iypj1
rachit2588 said:
ok uploading will update the links here
Here is the full official UK rom http://www.multiupload.com/GK4V4ICBIK
No problems with haptic feedback, all working fine.
Flash via rsd lite ...but before that do complete factory wipe / erase data /cache etc etc
Here is the nandroid and fixed sbf :: http://www.multiupload.com/YZTSVZ2OJ3
first restore the nandroid via Custom Recovery and flash the fixed sbf.. as usual procedures
Click to expand...
Click to collapse

Yay! Thanks.

Ah, magnificent. Thanks.
Sent from my GT-I9100 using XDA Premium App

Good job, thanks so much.
I was sick I let it through my fingers when I updated!

Thank you, I have been waiting for this ;0)

the file in the archive is dated 14.04.2011... it's genuine GB SBF?
anyway, thanks!

Downloaded this file by MSU
it's genuine GB SBF

Hi,
I have run Recuva over my file system. I could not recover the sbf, but the file name, modified time and size were found.
They match perfectly the file I downloaded from mpieq.
Cheers, as far as I'm concerned that is the real thing.
Olly

Works great! Thanks very much.
Now then... who is going to produce a theme so it looks like leaked / 2.3.3 that wouldnt work with the unfortunate green camera devices?
Andy

Was on early 2.2.1 - wanted to upgrade in case of warranty issues.
Flashed with RSD Lite. New Red Motorola logo with white rings when phone starts, but had to pull battery and re-boot manually.
Phone is upgraded with all contacts, settings etc as before.
Just had to root phone with superoneclick to get Titanium back-up and SetVSL running.
30 mins start to finish. Many thanks

NickAJ said:
30 mins start to finish. Many thanks
Click to expand...
Click to collapse
You're luck. After upgrade mine boot up but with all settings and apps restored, however it after rooting it wasn't stable. Got to do factory reset and... for a first time used TiBu to restore my apps - works flawlessly . The only issue was the lack of Polish Swype (got it with Eclair) but used the one from CEE ROM and it works flawlessly.

mine simply has lost his Haptic Feedback... it must be restarted to gain his capabilities restored. is losing also his WiFi (with error message in wifi and network settings) and the data connection...
any ideas? could be from the JuiceDefender wrong resources management?

I am on motorola defy with formware version 2.51.1. If I upgrade to this will I lose my root, if I lose root can this be rooted by SuperOneClick.
Does it have blur is without Blur, I ma looking for something without Blur.

With Blur or without Blur?
Sent from my Toilet using Motorola DEFY.

I am looking for without Blur.If I upgrade to this will I lose my root, if I lose root can this be rooted by SuperOneClick.

croxley said:
I am looking for without Blur.If I upgrade to this will I lose my root, if I lose root can this be rooted by SuperOneClick.
Click to expand...
Click to collapse
This ROM is blurred. I flashed it over 2.2.1 (the UK 3.4.3-11 ROM), which I had previously successfully rooted via SOC (in fact, an older version, from months ago), but, as, at first, for strict test purposes, I decided not to wipe anything at all after flashing this ROM, the root condition (just like all my applications and settings) was kept as it was before. My Defy is in this very state ever since.
By the way, I haven't noticed differences between the two ROMs.
Just my 2 cents...
Regards,
Carlos

i have installed the full sbf
no problems with haptic feedback.
all looks fine and smooth..blur is also working nice ..even you can skip the setup.
just the 3g gets stucks up when the phone is idle..(the "H" is shown but the arrows ↑↓ are greyed out ..i have to reconfigure the apn and set it again to get it working.
Guys ne thoughts on this 3g problem..?? i have used defy baseband to switch my baseband for india.
EDIT :: solved the problems....i think this is problem free blur rom so far ...!! kudos to motorola uk..!!
note :: i didnt download from any links given here..i had some other source.

Their is some problem with the link? I have tried to download 3 times, but corrupt file...

If I wanted to go from the Korean 177 base sbf with cm7 rc1 installed to this what would be the procedure? Is it as simple as doing it through rsdlite or through the 2nd init recovery?
Thanks
Sent from my MB525 using XDA App

ifu said:
Their is some problem with the link? I have tried to download 3 times, but corrupt file...
Click to expand...
Click to collapse
Should i upload nandroid / full sbf for you..??

[COLLECTION] D2G SBF/ROOT/RSD/ROM Download & Guide Links

***Last Updated May 20, 2012***
I thought I would put all these links together for everyone.
Also there is a FAQ section at the bottom of this post.
_____________________________________________________________
If there are dead links or credit due, let me know and I will do my best to fix it...
_____________________________________________________________
*** DO NOT OTA the .629 official update ***
But if you do,
This is the answer...
Tried, Tested, Good to go!
EASY WAY -
http://rootzwiki.com/index.php?/top...e(EzSbf-method)-**D2G-A956-only**#entry730130
LONG WAY -
UNBRICK/ROOT the .629 OTA Update
http://rootzwiki.com/index.php?/top...29-&-root-normal-function-OTA-629#entry624422
​_____________________________________________________________
Standard Disclaimer:
Rooting your phone VOIDS THE WARRANTY. Rooting Your phone is against your TOS with your carrier(with few exceptions). Rooting your phone will put you in a position where you CAN NOT rely on your carrier's customer service dept.
Neither I, nor anyone in this forum, nor anyone other than YOU (the person modifying YOUR phone, breaking YOUR contract with YOUR carrier) is responsible for any damage to YOUR phone.
WARNING:
THERE BE DRAGONS HERE...​
_____________________________________________________________
FAQ Frequently Asked Questions
FAQ Thread
EZ CD SBF method (THIS WORKS GREAT. A MUST HAVE)
http://www.droidforums.net/forum/droid-2-global-hacks/170060-tool-ezsbf-d2g.html
SBF Flash for unix based operating systems (unix, Mac osX, etc.)
Recommended for this post by x13thangelx
OPTICALDELUSION: sbf_flash updates
--->D2G SBF 4.5.608(GB)
Gingerbread Full SBF 4.5.608 - Droid 2 / R2D2 / Milestone 2 / Droid 2 Global - RootzWiki
--->D2G SBF 4.5.607(GB) download and install instructions
Gingerbread leak - D2G Updated to 4.5.607! - Droid 2 / R2D2 / Milestone 2 / Droid 2 Global - RootzWiki
***Multiupload site down***
--->D2G SBF 2.4.29(Froyo)
Droid 2 Global SBF File (2.4.29) Full and RSDLite - MyDroidWorld
--->D3 root
Pete's Motorola Root Tools
--->RSD Lite 5.4.4
http://cmw.22aaf3.com/common/RSDLite5.4.4.zip
--->Motorola Drivers 5.4.0
http://www.motorola.com/staticfile...al_Drivers/MotoHelper_2.1.32_Driver_5.4.0.exe
HOW TO LOGCAT ​When helping developers fix problem with their app/ROM, it helps to give them specific info from the device in question at the time of the problem(force close, crash, bug, malfunction, etc...).
This info comes in the form of a LOGCAT.
Here are some links to how and why to do this:
http://forum.xda-developers.com/showthread.php?t=1378491
http://forum.xda-developers.com/showthread.php?p=19348866#post19348866
__________________________________________________________
__________________________________________________________
GINGERBREAD KERNAL (RED "M" AT BOOT)
4.5.x
Will NOT work on Froyo
__________________________________________________________
__________________________________________________________​
CM9[BETA][KANG]
GB Kernal ICS Overlay
--->User Thread
Cm 9 user thread D2G - Droid 2 / R2D2 / Milestone 2 / Droid 2 Global - RootzWiki
--->Developer Thread
-for-Droid-2-Global-(ICS/4.0.3)---Update:-3/15/12#entry467557]Cyanogenmod 9 [UNOFFICIAL] for Droid 2 Global (ICS/4.0.3) - Update: 3/15/12 - Droid 2 Global Development - RootzWiki
---> Current build for CM9 [BETA][KANG]
http://rootzwiki.com/index.php?/topic/28082-[D2G]-CM9-Build-Thread---6/29#entry749488
Developers: MrB206, x13thAngelx, bikedude880, JCalvin
__________________________________________________________
LIQUID SMOOTH[BETA][KANG]
GB Kernal ICS Overlay
User/Developer Thread
http://rootzwiki.com/topic/29094-liquidics-v15-unofficial-port
---> Current build for LIQUID SMOOTH[BETA][KANG]
http://synibox.info/...we-ics-v1.5.zip
MD5: ad36a1b2817e3f8f04ed123fcb937e0a
Developers: x13thAngelx
__________________________________________________________
AOKP for D2G [BETA][KANG]
GB Kernal ICS Overlay
--->Developer Thread
--->User Thread
http://rootzwiki.com/index.php?/top...roid-2-Global-[UNOFFICIAL]-[4/28]#entry613702
--->Current Build
http://synibox.info/synik4l/x13thangelx/D2G/AOKP/aokp_droid2we-beta-b35.zip
Developers: x13thAngelx, bikedude880, AOKP team
__________________________________________________________
Gummy [BETA]
GB Kernal ICS Overlay
--->Developer Thread
http://rootzwiki.com/topic/21313-droid2-webeta/
--->User Thread
--->Current Build
Developer: Jonman408, x13thAngelx, bikedude880, Gummy team
__________________________________________________________
MIUI - Galnet[Unofficial]
GB Kernal ICS Overlay
--->User/Developer thread
http://rootzwiki.com/topic/12580-ga...o-charge-ledvolupdated-bootmenu-various-fixs/
---Current build
http://hotfile.com/dl/146038248/9bb51b5/d2gmiuiics2210.zip.html
https://rapidshare.com/#!download|274p2|2314060328|d2gmiuiics2210.zip|132342|0|0
Developers: BeansTown106
__________________________________________________________
MIUI - US[OFFICIAL]
ICS Kernal
--->User/Developer thread
http://rootzwiki.com/topic/21656-of...32012-gsm-phonedatammsstock-camerabeatsaudio/
--->Current Build
SEE THREAD
Developers: BeansTown106
__________________________________________________________
***This ROM is no longer in developement***
***at least not by the original team.***
CM7GB [FINAL][KANG] RevNumbers
--->User Thread
CM7 for Droid2 Global User's Thread - Droid 2 / R2D2 / Milestone 2 / Droid 2 Global - RootzWiki
--->Developer Thread
Droid-2-Global-CM7-with-Gingerbread-Leak-Kernel#entry70459][DEV_THREAD]Droid 2 Global CM7 with Gingerbread Leak Kernel - Droid 2 Global Development - RootzWiki
Developers: RevNumbers, x13thangelx
__________________________________________________________
[ROM] Apex GB
[D2G]-ApeX-2.0.0-Release-Candidate-(RC4)-(10/10/2011)#entry108223][ROM][D2G] ApeX 2.0.0 Release Candidate (RC4) (10/10/2011) - Droid 2 Global Development - RootzWiki
__________________________________________________________
__________________________________________________________
FROYO KERNAL (WHITE "M" AT BOOT)
2.4.x
Will NOT work on Gingerbread
__________________________________________________________
__________________________________________________________​
***
Please Note
The Official CyanogenMod 7
On the OFFICIAL CM website
Is
FROYO ONLY
2.4.x
See Above for CM7/CM9 on the Gingerbread Kernal
4.5.x
***​
***instructions on CM7Froyo***
***Thread Name MISLEADING***
-Cyanogenmod-7-For-The-Motorola-Droid-2-Global-::-V7.1.0-(9-Oct-2011)#entry152764][Rom] Cyanogenmod 7 For The Motorola Droid 2 Global :: V7.1.0 (9 Oct 2011) - Droid 2 Global Development - RootzWiki
[ROM][FINAL] HEXEN (Froyo)
[ROM RELEASE] HeXen ROM 1.0.0 (Froyo) FINAL
[ROM] Angel (Froyo)
[Global]-AngelRom-v0.7.5#entry988][ROM][Global] AngelRom v0.7.5 - Hexen - RootzWiki
[ROM][Unofficial] Liberty
[PORT]-Liberty3-D2G-2.0---Unnofficial-(11/29/11)#entry259893][ROM][PORT] Liberty3 D2G 2.0 - Unnofficial (11/29/11) - Droid 2 Global Development - RootzWiki
Increase battery life by underclocking/undervolting
(overclocking instrutions in here also)
-via x13thangelx
Battery Life By Underclocking - Droid 2 / R2D2 / Milestone 2 / Droid 2 Global - RootzWiki
[FAQ section:
These are important excerpts from posts I have read. I will try to keep this section to the point.
___________________________________________________________ ​
How do you enable sideloading of apks on your AT&T phone?
This link explains it all...
How to enable sideloading on rooted AT&T phones - Android Forums at AndroidCentral.com
Click to expand...
Click to collapse
____________________________________________________
For app conflict resolution.
Wipe cache partition
Wipe Dalvik cache
Fix Permissions
If that doesn't do it,
Use titanium backup.
Batch backup all your user apps.
Wipe data and factory reset your current rom.
Verify the problem exists before re installing your personal apps (don't use the market app untill the end of this process).
If the problem exists, I would sbf back to stock and start over from scatch.
If the problem goes away, start restoring your user apps/data one at a time in titanium backup to try to replicate the problem. It could be just one or more apps conflicting with each other.
If you can identify which app(s) are causing the problem, uninstall the app(s) and download them again from the market (or other source) to install them fresh.
This may solve your problem. If not, then either try using other apps or doing without the problem apps (assuming you can identify the offending apps).
After this go ahead and enter the market app for your other/paid apps
As always, every device is different (even the same model, running the same rom, with the same apps installed) and sometimes there are unusual problems for individual phones.
Click to expand...
Click to collapse
____________________________________________________
Question posed by ME
I have been seeing this on multiple threads so I want a clarification. Please.
Cm7 comes with cm recovery baked in (froyo & gb?). Rom Manager won't work with out flashing cwr. For that flash droidx 2nd init.
1) If you are not going to use rom manager, do you need to flash this?
2) bootstrap recovery conflicts with cm7 and MIUI. How do you get to cwr if everything fracks up? When you bootstrap you can get to cwr by doing battery pulls.
Click to expand...
Click to collapse
Answer from bikedude880 @ rootzwiki
It is highly recommended to install cwm via Rom Manager as CM7 /removes/ bootstrap entirely on install. Newer version can restore older, but not the other way around. Battery pulls are still applicable.
Click to expand...
Click to collapse
___________________________________________________________
Question posed by ME
I have a couple questions.
#1 can I flash a nandroid of a different device to recover this one if things go wrong?
#2 when updating the cm7gb revnumbers kang, do we have to factory reset and wipe data/cache?
#3 can you reflash on top of the current rom to reset the system software/settings etc. (To get rid of scripts and mods and be fresh) without factory reset and wipe data/cache? So as not to loose apps and settings etc...
Click to expand...
Click to collapse
Answer from kr3n @ rootzwiki
#1 As long as the nandroid is from a d2g and has the same kernel
#2 No
#3 It will get rid of mods and scripts but I think settings are stored in data
Click to expand...
Click to collapse
____________________________________________________
Question posed by ME
Is there a way to see which CM4D2G (CM7) nightly you currently have installed?
Click to expand...
Click to collapse
Answered by x13thangelx @ rootzwiki
Yes, look at the latest zip you have on your sd card
otherwise, no.
Click to expand...
Click to collapse
____________________________________________________
Question posed by : vlambrecht on xda
This is regarding the new .608 gb sbf
So, I can flash that over my current install of Foryo + root + Clockwork?
Also, what about the unlocked status of the phone?
I have no idea how it is unlocked. Is there any way I can tell if the phone has been truly unlocked?
Click to expand...
Click to collapse
Answered by : sd_shadow On xda
Yes you can flash it with what ever you have or don't have
You will have to reroot after with petes root tools
Once unlocked the phone is always unlocked can't be locked again
Sbfs and roms don't touch that part of phone
Click to expand...
Click to collapse
____________________________________________________________
Question asked by an overseas android owner:
How do I recover my D2G I bought from someone in the USA and shipped to (insert your country)
Click to expand...
Click to collapse
This posed the next question.
Is the USA VZW SBF the one you flash for an overseas phone?
Click to expand...
Click to collapse
Answered by Gasai Yuno in Rootzwiki Forums:
There are no non-US D2Gs. Use the stock 4.5.608 (or 4.5.629 if it was somehow updated to 4.5.629).
Either try ezSBF or RSDLite the proper official 4.5.608
(the MD5 sum for it is 2152ee89e314f5b282753ee56fa36c07).
Naturally, on CM7, the device cannot be unlocked.
Click to expand...
Click to collapse
Droid2 Global
Pooka-CM4D2we-GB-20120330 ***CM7 [Kang]***
tapatalk2beta5

Edit: saving this space...

most stable rom?
This is a great collection, thanks for the legwork.
Noob Question, if I may: I'm currently on Hexen/Froyo and wanting to upgrade to GB. Is there a general opinion on the question of "Most Stable GB Rom", currently? Or some sort of high-level pros/cons discussion? Searching the forums doesn't really yield good results - mostly it's people with problems, or folks who don't know how to sbf. I'm basically interested in finding out which one crashes the least, or conversely, the one that "you just like, even w/ the occasional reboot".
I reckon the following are on the table: Apex, Liberty, MIUI, & CM7; not sure if either Venus, or the VZ stock GB are even worth considering...? (What's the skinny on Venus? I read it's garbage/banned, and then I read elsewhere that it's just fine... big wtf there.)
Thanks in advance; long time reader, 1st-time poster. Have a good one out there.

Stock Gingerbread is very stable. Unlike stock Froyo, it's not as slow as well; the Gingerbread version of Blur is a lesser resource hog.
Stock 2.3 will also give you the best battery life so far, according to my research. (I get up to 36 hours on a single charge with GPS and WiFi on 24/7.) Just root it, and freeze some bloatware. You can also use a 3rd party launcher instead of the stock Blur one.
Random reboots happen with the stock ROM, however not quite often. For example, my phone usually reboots itself after 400-450 hours of uptime.
MIUI and CM7 are only stable for CDMA users. On GSM, there are numerous issues with WiFi and mobile data.

I honestly only have experience with Hexen(froyo) which was great and CM4D2G-GB (CM7).
CM7 has lots of great features but imo is not quite as polished as hexen yet. Stable for the most part on cdma but some users complain of bluetooth issues(think its the bt devices not the phone or rom. There are sooooo many different kinds out there it is hard to build for all.) Also remember we are still in nightlies for cm7-GB. It will get better...
Still both are better than blurstock.
Follow the links I provided if you want a more in depth look at the roms...
Droid2 Global CM4D2G-GB-20111217 ***CM7 RevNumbers Kang***

Thread stuck

Ran through 'em all quickly
So just a quick report - I decided to get really friendly with RSD Lite today. Overall results:
- no CM7 (what's this 2nd-init business? Maybe I missed something here)
- Apex installed fine
- Liberty installed fine
- MIUI looks kinda freaking AWESOME, but it wouldn't reboot for me, after I'd tried to install Droid 2 Bootstrapper.
I performed the following sequence many times, except when switching from Apex to Liberty, that was the only rom switch that went gracefully. All others required:
- SBF to Froyo .330
- apply upgrade.zip (.607)
- Rooted w/Droid 3 one-click
- Installed Droid 2 Bootstrapper
- - Bootstrapped recovery
- - Rebooted recovery
- Wipe data/factory reset, wipe cache partition, wipe Dalvik
- install rom from zip.
Let me know if you think I missed something in that process, w/r/t CM7 or MIUI. Tired of flashing though, probably just gonna settle on a coin-toss between Apex & Liberty.

One more step. After all that and maybee after you get your base of personal apps going, fix permissions.
I am not sure if it makes a difference if you do it in recovery or through rom manager(or another app).
_______________________________________________________________________
Once you flash cm7-GB you no longer should use bootstrap recovery. There is a conflict of some kind. Get around this by installing ROM Manager and flashing ClockworkMod Recovery (droid X 2nd init). After that you are good to go. I have had no problems. If you want more info on this, follow the link to the cm7-gb thread and read, read, read.... it is in there or the dev thread (which is linked to in the OP of the users thread)
Droid2 Global CM4D2G-GB-20111217 ***CM7 RevNumbers Kang***

You must not install Droid 2 Bootstrap on MIUI. MIUI includes CWM. CM7 also includes CWM.
And CM7 installs like every other ROM.
Not sure why would you flash the SBF image every time. You only need to flash it in case you are unable to enter CWM.

Gasai Yuno said:
You must not install Droid 2 Bootstrap on MIUI. MIUI includes CWM. CM7 also includes CWM.
And CM7 installs like every other ROM.
Not sure why would you flash the SBF image every time. You only need to flash it in case you are unable to enter CWM.
Click to expand...
Click to collapse
that was the case, i was unable to get into CWR at all. For example with CM7, I did all that, rebooted, and it just hung at the red "M" logo, and I could only get back into the "Android Recovery <e3>" area. i tried a few different ways of re-installing the O.G. gingerbread update.zip (.607) file, but nothing would work, so I just wound up SBF'ing then running update.zip, then re-rooting, then re-installi.... you get the point.
But again, this is only the 3rd rom I've ever tried, and the first 2 were on Froyo and both ran perfectly fine. Thanks for the tip on not installing Droid 2 Bootstrap onto MIUI... hah, "duh" says me.

On ICS MIUI, press Volume Down when you see the LED light up (blue) while the red Motorola logo is still displayed.
This will take you to the boot menu, and from there you can access CWM.

Gasai Yuno said:
You must not install Droid 2 Bootstrap on MIUI. MIUI includes CWM. CM7 also includes CWM.
And CM7 installs like every other ROM.
Not sure why would you flash the SBF image every time. You only need to flash it in case you are unable to enter CWM.
Click to expand...
Click to collapse
Hi Gasai,
I am also a GSM user... but I suffer from terrible battery life possibly because of the number of apps I have installed. Do you have very few apps installed ?
Also I understand that our only real option is stock blur minus bloat . Or is there anything else ?

I run stock because it's the most stable 2.3 ROM I know as of this moment. Neither MIUI nor CM7 developers care about GSM anyway.
Battery life varies for me from 18 to 32 hours, but I rarely use my phone for more than 1-2 hours a day.

how to remove logwrapper hijack
or this

Finally a shortcut of recovering the phone - GB 4.5.608 full SBF has been released. Thanks to Droid-Life for the link
http://www.megaupload.com/?d=4ZE995AD

leobg said:
Finally a shortcut of recovering the phone - GB 4.5.608 full SBF has been released. Thanks to Droid-Life for the link
http://www.megaupload.com/?d=4ZE995AD
Click to expand...
Click to collapse
Thanks, so now i can flash directly to 608

Love This Thread!
But Quick Question, I Rooted My Phone This Morning & All I Have Is SuperUser. Anything Else Was Supposed To PopUp Or No?

8o8OhBby said:
Love This Thread!
But Quick Question, I Rooted My Phone This Morning & All I Have Is SuperUser. Anything Else Was Supposed To PopUp Or No?
Click to expand...
Click to collapse
no that's it
but now you can use titanium backup, screenshot, edit system files with a file viewer/ explorer(root exlporer), and install roms
edit: superuser is your root control if you want a program to have administrative access you allow/deny that with superuser

sd_shadow said:
no that's it
but now you can use titanium backup, screenshot, edit system files with a file viewer/ explorer(root exlporer), and install roms
edit: superuser is your root control if you want a program to have administrative access you allow that with superuser
Click to expand...
Click to collapse
Now Forgive Me When I Ask This,
All I Did Was Root & Thats It, So How Do I Go About To Roms & OverClock & All That Good Stuff?

8o8OhBby said:
Now Forgive Me When I Ask This,
All I Did Was Root & Thats It, So How Do I Go About To Roms & OverClock & All That Good Stuff?
Click to expand...
Click to collapse
Follow the links in the Original Post and read the info you find in them...
Droid2 Global CM4D2G-GB-20111217 ***CM7 RevNumbers Kang***

[ROM] Typhoon V1.1 2.3.6 base GB Rom smooth fast and stock [05/05/2012]

Welcome to Typhoon 2.3.6 based reworked rom..
Features:
- Base: Argentina V20a Mixed with Italian V21E = 2.3.6 base.
- Kernel: corrupt kernel (it's there for a reason follow instruction's to get it working.))
- Launcher: Stock launcher with a tonne of tweaks.
- SD Booster set to 128 for people with camera problem.
- Stock apps everything is intact nothing removed.
- Deodexed.
- Zipaligned.
- EXT 4.
- Massive APN list your's should be selected automatically.
- Ram Tweaks.
- Better 3G and Wifi support.
- FM Radio added.
- Stock boot animation and down animation.
- fixed google plus force close.
- Lots more language added.
- Latest play market added.
- Init.d tweaks.
- Smoothness tweak.
- All Hardware accelerated.
- Latest 3D Converter added.
- Beats Audio.
- Bravia Engine.
- Xloud Engine.
- Launcher moved to phone memory for better transition and smoothness.
- Fixed Battery Stats
Credits go to everyone on XDA for thier hard work that makes our android smartphone that little more special..
Bugs: You tell me..
READ CAREFULLY:
Ok kernel: You will get a corrupt kernel in this rom simply because kernel devs use the latest NDK release to make kernels. This in turn corrupts the wifi and Bluetooth. So to fix this you will install the rom and then go download either V4.2 or V0.6r from samno's kernel page it has to be those two as only none + kernels will work with this. Remember you must let your phone boot and you must set up your phone before flashing Samno's kernel to fix your wifi and bluetooth.. Remember also that the kernel must be a 21D kernel..
THE FILE SAYS VERSION 1 BUT IS ACTUALLY 1.1 I FORGOT TO CHANGE FOLDER NAME!!
Download Link: https://hotfile.com/dl/155052526/288e9a2/Typhoon_Version_1.zip.html
About theme or themes i have found that i cannot make everyone happy with my choice of theme. So instead i have decided that from now on all my roms will be stock. But good news is i will make a video soon on how to customise your own UI with UOT kitchen.. Keep an eye out for that too ..
How to install:
Before you even start you must make sure you have any V20 baseband or any V21 baseband.
1. You must be rooted to root there are plenty of guides that can be found in the general section please have a look.
2. You must have CWM installed guides can also be found in the general section.
3. Switch off your phone.
4. Once turned off hold the power + Volume down key together till it turns on then let go of power whilst still holding the volume down key.
5. Once in CWM you must wipe everything.
6. Install the new rom that you have downloaded from your SD card.
7. When installation is done restart and enjoy.

I'll have some

meemo you're on fire with these roms mang! keep up the great work

I flashed this over the clean rooted chinese V20G, and when I try to turn on Wifi it says "Error" and obviously doesn't work. I wiped data, cache and Dalvik cache when in CWM, flashed the zip and rebooted. I also had no APN's. I'm currently reflashing it, and if it still doesn't work, I'll download it again.
Edit: re-downloaded, same problems. Maybe it doesn't like the chinese rom?

I like... Thanks.
AcuraTeam V.20P_MOD_ICS_Aboot_1.9.7.4-V.2(1,3)

sandulea said:
I flashed this over the clean rooted chinese V20G, and when I try to turn on Wifi it says "Error" and obviously doesn't work. I wiped data, cache and Dalvik cache when in CWM, flashed the zip and rebooted. I also had no APN's. I'm currently reflashing it, and if it still doesn't work, I'll download it again.
Edit: re-downloaded, same problems. Maybe it doesn't like the chinese rom?
Click to expand...
Click to collapse
Erm did you read the READ CAREFULLY bit at all or did you just click download and install it blindly? i have placed a bad kernel on purpose you need to start it and set it up via the lg setup then go to samno's kernel page and download his V0.4.2 or V0.6r and install the kernel that will fix everything your Bluetooth, WiFi etc.. I am sick of people not reading is it hard to give up 5 mins of your time to read things or has technology blinded us humans badly? Oh since you will not read you need a 21D kernel but without plus maybe + works too try and tell me..

Meemo23 said:
I am sick of people not reading is it hard to give up 5 mins of your time to read things or has technology blinded us humans badly? Oh since you will not read you need a 21D kernel but without plus maybe + works too try and tell me..
Click to expand...
Click to collapse
It does, unfortunately. I read the whole post a few times, but I can't explain how I missed that paragraph every single time. If I didn't know any better, I could have sworn it wasn't there before. Sorry about that, honest mistake.

great job as usual mate...will test and report back
EDIT:wifi is not working
glad to see battery status is working

sandulea said:
It does, unfortunately. I read the whole post a few times, but I can't explain how I missed that paragraph every single time. If I didn't know any better, I could have sworn it wasn't there before. Sorry about that, honest mistake.
Click to expand...
Click to collapse
Lol no worries was always there not a problem didn't mean to be mean just tired long six days of flashing my phone i must of flashed it a hundred or more times just this week alone...
Evil Slayer said:
great job as usual mate...will test and report back
EDIT:wifi is not working
glad to see battery status is working
Click to expand...
Click to collapse
I hope you're only joking lol..

Meemo23 said:
I hope you're only joking lol..
Click to expand...
Click to collapse
no im not....neither do bluetooth btw
(yes i am joking )
looks good so far

21e - this not a 2.3.6 rom

dark.corners said:
21e - this not a 2.3.6 rom
Click to expand...
Click to collapse
Your reading skills are outstanding mate well done you earn yourself a gold star, where would you like it on your forehead?
I used the 20A from Argentina which is 2.3.6 and used all the apps and framework from 21E to make this otherwise you will get Argentinian shizz...

meemo consumption with regard to the battery are improved? also wanted to know if this rom has no ghost call as the original Italian 21e, thanks

antoniod4g0 said:
meemo consumption with regard to the battery are improved? also wanted to know if this rom has no ghost call as the original Italian 21e, thanks
Click to expand...
Click to collapse
The rom is not depended on ghost calls it's the baseband flash either V20G or V21E first as kdz to get baseband. Or get the fls files from the kdz and use smart flash to flash V21E or V20G baseband and use any rom without ghost calls..
Anyway soon i will make a V21E rom might as well wait if you don't want this one..

Meemo23 said:
The rom is not depended on ghost calls it's the baseband flash either V20G or V21E first as kdz to get baseband. Or get the fls files from the kdz and use smart flash to flash V21E or V20G baseband and use any rom without ghost calls..
Anyway soon i will make a V21E rom might as well wait if you don't want this one..
Click to expand...
Click to collapse
My biggest problem is the battery, not the ghost calls. I am interested in a ROM in which the battery should last longer than others, so I asked if the 21st improved fuel consumption, thanks anyway

antoniod4g0 said:
My biggest problem is the battery, not the ghost calls. I am interested in a ROM in which the battery should last longer than others, so I asked if the 21st improved fuel consumption, thanks anyway
Click to expand...
Click to collapse
i have been using this rom since yesterday and i have been able to use it 16 hours with wifi on. so i don't know maybe with just data enabled it will last longer..

Meemo23 said:
i have been using this rom since yesterday and i have been able to use it 16 hours with wifi on. so i don't know maybe with just data enabled it will last longer..
Click to expand...
Click to collapse
Consumption is especially active data connection, I really very hard than before, and tt titan kernel with it!

antoniod4g0 said:
Consumption is especially active data connection, I really very hard than before, and tt titan kernel with it!
Click to expand...
Click to collapse
titan kernel the new V0.6r is a beast i can leave my phone on stand by the whole night and only have a 1 percent battery drain.. Download setcpu and put minimum on 196 and max on 1008 will last you forever..

is this new kernal you speak of unreleased?
I don't see it on the Titan thread.

possible bug?
hi meemo,
just installed this on top of dna v2 and i'm having a problem with messaging. i did not wipe my data, just cache and dalvik. now whenever i enter the messaging app, it just keeps on displaying this "refreshing" prompt and i can't get to open any of my messages, i cant compose one as well. i reinstalled the rom again but same thing
thanks for the default theme by the way... it looks clean as it is

[Q] Cannot get from GB to ICS at all.

I keep running into problems after flashing any ICS custom ROM. (Maybe I should try going to an ICS Stock ROM first).
Most times it just loops on the loading screen.
- Phone is rooted of course.
- I usually have the Emancipation GB custom rom before flashing to this one or a Stock GB with root and red CWM.
- I follow instructions to a 'tee'
- When I do reboot, it loops at Samsung logo.
The last time I tried (Dark Knight ICS Rom), just recently, I flashed then rebooted into recovery (from advance-boot to recovery), and it didn't go to recovery mode, it just looped.
So currently I'm on Stock GB with root and red CWM.
What am I doing wrong?
What are some things I should consider?
Some of the GB custom roms are nice yes, but I rooted mainly so I could get ICS.
Thanks for any help anyone can offer/

http://forum.xda-developers.com/showthread.php?t=1610374
Wipe cache/Wipe dalvick/factory restore
You flash the rom
Then Gapps
Restart....Then it bootloops?

omansteveo said:
http://forum.xda-developers.com/showthread.php?t=1610374
Wipe cache/Wipe dalvick/factory restore
You flash the rom
Then Gapps
Restart....Then it bootloops?
Click to expand...
Click to collapse
Yeah pretty much.
Only happens for ICS ROMs. Well the ones I've tried.
Still new at this, so I'll keep trying and that link you posted is one of my most visited links.

Skebodan said:
Yeah pretty much.
Only happens for ICS ROMs. Well the ones I've tried.
Still new at this, so I'll keep trying and that link you posted is one of my most visited links.
Click to expand...
Click to collapse
Ive been at it for about 5 months now and have bricked my phone like 20 times ha ha...so Ill do what I can to help. I've been successful going from GB to ICS to JB and vice versa. Try this also....When you phone starts to boot loop pull the battery and boot into recovery. Then wipe everything again and reflash the rom and gapps

omansteveo said:
Ive been at it for about 5 months now and have bricked my phone like 20 times ha ha...so Ill do what I can to help. I've been successful going from GB to ICS to JB and vice versa. Try this also....When you phone starts to boot loop pull the battery and boot into recovery. Then wipe everything again and reflash the rom and gapps
Click to expand...
Click to collapse
lol alright thanks man. I've bricked mine about twice now. Just started about a week lol.
I'll give you an update in about 2 hours. Got to get ready for work

I have gone from Emancipation to this in the past with no prob... just follow his instructions for install and you are good to go - credit and thanks to Entropy512.
http://forum.xda-developers.com/showthread.php?t=1601844

Pony Express said:
I have gone from Emancipation to this in the past with no prob... just follow his instructions for install and you are good to go - credit and thanks to Entropy512.
http://forum.xda-developers.com/showthread.php?t=1601844
Click to expand...
Click to collapse
To be honest I was running from using Entropy's build.
Fear of it being too technical (It's actually the first thread I saw when I was thinking of going to ICS). So I used it and my phone is up and running now on ICS.
Won't be able to play around with it as much until I get home from work but thanks for mentioning it again.
Now to go and read the thread all the way through (kidding) well see if the problems he had are still occurring.
Thanks again guys.

For me, using Entropy's build made it easy to go to any other ICS rom for the Infuse- it is great as is or as a "stepping-stone" to other ICS builds. Glad it worked for you.

Yea man it was nice. I don't even need the other custom roms, this has everything I wanted.
And since it has a theme chooser, I'm good for life on the look of it.
I might try and customize my own stuff in the future but for now, all is right with my Infuse. I was going to get the Note but I got a brand new phone right here.

(Q) Rogers Infuse 4G - successful rooting - lag fix fiasco

Good morning,
While not a noob to rooting or flashing (currently active on Galaxy tab 2 boards) I appear to have made a noob mistake, and even though I searched and read stickies, etc - still made the mistake.
I rooted the Rogers Infuse 4G using this thread http://forum.xda-developers.com/showthread.php?t=1197248 and it worked without issue.
Decided to try the enable lag fix option - deleted the voodoo file on the sd card, and rebooted the phone. Phone got stuck on SAMSUNG screen (unfortunately - did not notice that the volume was off on the phone) and I did not hear the "voice" telling me what was going on - so rebooted the phone by holding the power button until it rebooted.
Spent a couple of hours after that re-reading, and since I was able to get into download mode - was able to reflash stock package through odin. When the phone did finally reboot (thankfully, as this is my daughter's daily driver) I noticed there was already a voodoo file on the sd card, with another file inside named "logs" Just in case, I deleted that file, and added a new one called "disable-lagfix" as per the original instructions.
Just to be sure - went back and ran the rooting procedure, and can confirm that we have root.
From there, I decided to flash the 100% working CWM Recovery file through Rom Manager - found the details on this thread http://forum.xda-developers.com/showthread.php?t=1107881 and can confirm that after rebooting into recovery - the phone has CWM Version 2.5.1.2
The phone is currently fully functional, no issues with network or wifi, playstore, etc - but would like to know if anyone can confirm that we are good to go should we decide to upgrade to a custom rom. I've done so much reading - that the recovery version confuses me ( red or blue, etc). I realize that some of the threads are back from early to mid 2011 - so not sure if they are still completely valid - so am asking before proceeding.
Phone settings are the following:
Kernal 2.6.35.7-I997RUXKG3-CL366622
Build GB.UXKG3
Baseband I997RUXKG3
Firmware 2.3.3
CWM 2.5.1.2
Currently have the voodoo/disable-lagfix file on the sd card
If anyone has gotten this far into the thread - and can offer up some feedback or recommendations - it would be appreciated
Thanks in advance,
Bill

I usually don't trust Rom manager, but if you are able to boot to recovery then I would say you are good.
If you want the red one (don't remember the version) you could flash a custom kernel with sgs kernel flasher (available on play store).
Infusion should work for you

andros11 said:
I usually don't trust Rom manager, but if you are able to boot to recovery then I would say you are good.
If you want the red one (don't remember the version) you could flash a custom kernel with sgs kernel flasher (available on play store).
Infusion should work for you
Click to expand...
Click to collapse
Thanks for the reply - appreciate your time
Guess it's time to turn that volume up, delete the voodoo folder, and cross my fingers....
Just to confirm - do I delete the voodoo folder itself, or the disable-lagfix folder inside the voodoo folder only ?
Again, thanks
:good:

What were you planning on flashing?
You can probably leave it there for now, and after you have flashed then you can dispose of the folder.
Sent from my Transformer using xda app-developers app

andros11 said:
What were you planning on flashing?
You can probably leave it there for now, and after you have flashed then you can dispose of the folder.
Sent from my Transformer using xda app-developers app
Click to expand...
Click to collapse
First off andros11 - thank you so much for your time in replying to my issue.
My daughter has been looking over the development site - and,
as it stands right now, she has her mind set on the Dark Night Rom by VortexJunior.
Here is the link, if it helps http://forum.xda-developers.com/showthread.php?t=1662280
The install instructions, while relatively simple - and similar to what I am used to doing - but no mention of lagfix
Installation: From Gingerbread
1. Download Zip
2. Wipe Data/Factory Reset
3. Wipe Cache Partition
4. Flash
5. Reboot into recovery(Advanced>Reboot recovery)
6. Flash again
7.BAMM!
Thanks again for your time and replies,
Regards

Once on ICS I don't think you have to mind about lag-fix..
Also, I suggest you just reboot instead of rebooting into recovery. That often causes recovery bootloops.
When you reboot, the phone will hang at the kernel splash screen (this is normal). Just take out the battery, place it back in and boot into recovert with 3-finger combo (vol +, vol - and power, and let go when samsung logo pops up)
My personal suggestion is that you move on to JB. It performs much better, and mostly all development is now there.

Perfect - thanks
Am running CM 10.1 on my tablet, and love it
Will have my daughter research JB ROMs instead.....
Happy Holidays to you and your family
Regards,
sent from my GT-P3113 using Tapatalk 2

Lag fix??
I am confused.. what exactly is the lagg fix? My GF has a JB (one of phablet ROMS) installed and all the JB ROMS I have installed on this phone (and I think all ROMS besides JB) have had lagg problems. So I would really like to know how to fix this phone.

About that lagfix...
If I remember correctly voodoo lag fix was originally designed for the Galaxy S to change the file system it ran at to something that made the phone feel more responsive and access recourses quicker. It was ported to other ROMs so if a ROM includes it then you're ok to use it but I don't think you can just apply it to any JB ROM. Plus after using a GB ROM with this lagfix for some time, any 4.0 and above ROM I have used after that has been a LOT quicker in comparison. So I would probably look into the way you JB roms were installed maybe do a data wipe/factory wipe in CWM and reinstall the ROM from the beginning. What ROMs are you using exactly?