Delete / Lock Please
Mine
--
Mine
1 more
Re: ShagMod CM7 v1.x - MegaBass - 2/13/13
Looks great shag
Sent from my Galaxy Nexus
thumbs up bro, good luck with this. will keep an eye on it.
aaahhhhhhhhhh I missed the first spots nooooooooooooooo.Just kidding. Im happy to see this come out.
Re: ShagMod CM7 v1.x - MegaBass - 2/13/13
Nice work shag! Will check it out when I have time.
Sent from my PC36100 using Tapatalk 2
Update later today........
Op updated to version 1.1.
Re: [Rom][2.3.7][AOSP] ShagMod CM7 v1.1 - MegaBass - Seeder - 2/14/13
Sent from my SPH-L900 using JellyBombed Tapatalk 2
When I flashed it rebooted 2 times once it got to the flash screen. It rebooted once more but this time it fully booted up. Just to give a heads up to others if it happens, just let it reboot a few times.
BonezMontana said:
When I flashed it rebooted 2 times once it got to the flash screen. It rebooted once more but this time it fully booted up. Just to give a heads up to others if it happens, just let it reboot a few times.
Click to expand...
Click to collapse
Thats because of apps2sd being baked in, totally normal.
ShagNasty2 said:
Thats because of apps2sd being baked in, totally normal.
Click to expand...
Click to collapse
Thanks for the clarification, I thought that may have been the reasoning but wasn't sure.
BonezMontana said:
Thanks for the clarification, I thought that may have been the reasoning but wasn't sure.
Click to expand...
Click to collapse
Updated
ShagNasty2 said:
Updated
Click to expand...
Click to collapse
Getting wifi error? Boots fine ? Will let it sit a while longer Thank You
HandsomeOne said:
Getting wifi error? Boots fine ? Will let it sit a while longer Thank You
Click to expand...
Click to collapse
Not getting error here, i will wipe phone reload and see if i can get it to error.
ShagNasty2 said:
Not getting error here, i will wipe phone reload and see if i can get it to error.
Click to expand...
Click to collapse
I did Triple wipe ,I will download again , MD5 was good but will give it another go Tnx
HandsomeOne said:
I did Triple wipe ,I will download again , MD5 was good but will give it another go Tnx
Click to expand...
Click to collapse
Ok i was able to get the wifi error after reloading, looks like the kernel didnt take correctly after 1.1.
Flash this in recovery and it should fix the problem until i get it baked...
Thanks for letting me know.....
ShagNasty2 said:
Ok i was able to get the wifi error after reloading, looks like the kernel didnt take correctly after 1.1.
Flash this in recovery and it should fix the problem until i get it baked...
Thanks for letting me know.....
Click to expand...
Click to collapse
Ok thank you, will reflash thanks for all you work !!
Re: [Rom][2.3.7][AOSP] ShagMod CM7 v1.2 - MegaBass - CrossBreeder - 2/16/13
HandsomeOne said:
Ok thank you, will reflash thanks for all you work !!
Click to expand...
Click to collapse
No need to reflash rom, just the file i posted.
Sent from my PC36100 using Tapatalk 2
Related
Hi,
This tool unlock bml5 to allow writing of kernel with a simple "dd" command.
You can find also a basic update.zip for CWM that :
- Make backup of the current current
- Flash new kernel
The bmlunlock tool is in kernel_updater.zip.
How to use :
Put your zImage in the update.zip. Then, use CWM and install zip.
This tool was made by Koush (Thank to him ): http://forum.xda-developers.com/showthread.php?t=767431
also Thanks to Supercurio for the updater idea.
@Marcellusbe, Excellent work as usual Fantastic feature!!
Thank you ....will try it out
Sent from my GT-I5800 using XDA App
That's what i was thinking about when we still had 2.1 and a unlocked recovery but no kernels to flash, when clockwork came i just forgot about that, so thanx a lot again sebastien...
----------------------------------------
tapatalked
marcellusbe said:
Hi,
This tool unlock bml5 to allow writing of kernel with a simple "dd" command.
You can find also a basic update.zip for CWM that :
- Make backup of the current current
- Flash new kernel
The bmlunlock tool is in the update.zip.
How to use :
Put your zImage in the update.zip. Then, use CWM and install zip.
This tool was made by Koush (Thank to him ): http://forum.xda-developers.com/showthread.php?t=767431
also Thanks to Supercurio for the updater idea.
Click to expand...
Click to collapse
Awesome!
Thanks! this would be very helpful as we have change kernels on the go.
a video tutorial would be nice on this .. how bout it rudolf ??
Cool, i like this tread. Thks.
Sent from my XXJP-X GT-I5800 using XDA App
Nice work man
You are bringing us something new everyday
Keep it up
pflorin said:
a video tutorial would be nice on this .. how bout it rudolf ??
Click to expand...
Click to collapse
Is this hard todo? You just have to open the zip(not extract) and replace it with a new zimage.
Sent from my GT-I5800 using Tapatalk
Awesome!! Works perfectly!! Thank you marcellusbe
Sent from the 3rd Galaxy !
Sorry to say that rudolf but i also dont really know what to do.. video showin that would ve awesome..
Sent from my GT-I5800 using XDA App
burakweischdu said:
Sorry to say that rudolf but i also dont really know what to do.. video showin that would ve awesome..
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
Well ok then will make a quick n short video for this
Sent from my GT-I5800 using Tapatalk
updated kernel by it.previous kernel is fugumod 2.2 OC1300,now i'm flashing 2.4 beta3 standard,partitions converted to ext4,ext4,ext2
now,it's stays on boot screen for 8minutes,i'm still waiting it...
dxdiag32 said:
updated kernel by it.previous kernel is fugumod 2.2 OC1300,now i'm flashing 2.4 beta3 standard,partitions converted to ext4,ext4,ext2
now,it's stays on boot screen for 8minutes,i'm still waiting it...
Click to expand...
Click to collapse
if u got a BIG /data partition.. u hav to wait for a long.. sumtimes more than 10 mins.. **once i waited for ~20 mins..
**** ur sd card must hav enough space to backup the partition files & do the conversion & restore the backup.. otherwise ur phone will b SOFTLY BRICKED..!!
:-/
Thanks !! )
Sent from my GT-I5800 using XDA App
ranadip.bswas said:
if u got a BIG /data partition.. u hav to wait for a long.. sumtimes more than 10 mins.. **once i waited for ~20 mins..
**** ur sd card must hav enough space to backup the partition files & do the conversion & restore the backup.. otherwise ur phone will b SOFTLY BRICKED..!!
:-/
Click to expand...
Click to collapse
my partitions have been converted,this operation will do it again?
and i think all things the updater did has been finished in the recovery,not in the boot logo screen.i'm doubt whether it work in a right way...will test it again soon
dxdiag32 said:
and i think all things the updater did has been finished in the recovery,not in the boot logo screen.i'm doubt whether it work in a right way...will test it again soon
Click to expand...
Click to collapse
What exactly did u do.? I flashed fugumod 2.4 b3 without any problems..
Sent from the 3rd Galaxy !
Rapier07 said:
What exactly did u do.? I flashed fugumod 2.4 b3 without any problems..
Sent from the 3rd Galaxy !
Click to expand...
Click to collapse
ok ,now it's working,i don't know what happened though
dxdiag32 said:
ok ,now it's working,i don't know what happened though
Click to expand...
Click to collapse
Glad
Sent from the 3rd Galaxy !
Hi people,
I have compiled my own kernel, the initramfs is from skin because I spend all my time on CM7.
I have not tested it, because I dont have the device.
Read the disclaimer:
Netchip is not responsible for damage caused by the kernel and / or device.
If you encounter problems using this kernel, in what a way, I am not responsible.
You flashed the kernel, it is your responsibility.
This kernel is not tested!
This kernel is very very unstable, and not tested
Click to expand...
Click to collapse
Before you flash this, make a nandroid backup, this script wipes all your data, set back your nandroid backup immediatley after install of this kernel, no reboot!
Features:
- BFQ
- CWM
- AUX Video driver
- EXT4
Install:
Install it directly via Odin
Enjoy
I will try this tomorrow and let you know!
Right now I don't have my computer!
Thanks!
Sent from my gt-I9003 with A.I. Type
One question, this kernel can be flashed on any firmware or there is a specific firmware for this kernel?
M going to test it now will soon post the result
kancilpintar said:
One question, this kernel can be flashed on any firmware or there is a specific firmware for this kernel?
Click to expand...
Click to collapse
This is KPH if I dont had it wrong.
But it can flashed on any firmware.
I cannot guarantee that it works on every firmware
Dude just signed it again i am getting an error 06
it says : status 6 .. installation aborted !
kkrraazzyy said:
Dude just signed it again i am getting an error 06
Click to expand...
Click to collapse
I go repair it tomorrow, I have now no time.
really wanted to test it, but after already arriving with the first error, better not ^ ^
I wait for now.
But I think good, that someone still wants to write a kernel.
When he finishes, he is definitely good. with all the features.
have good things take time
xXCorleoneXx said:
really wanted to test it, but after already arriving with the first error, better not ^ ^
I wait for now.
But I think good, that someone still wants to write a kernel.
When he finishes, he is definitely good. with all the features.
have good things take time
Click to expand...
Click to collapse
I go upload version 2.
You can download it soon, this evening.
Hi all
Can anyone tell what BFQ stand for ?
anyone tried v 2.0 yet?
I tried V2 already.Still NOT WORKING....
Status 6,Installation aborted..
quan815 said:
I tried V2 already.Still NOT WORKING....
Status 6,Installation aborted..
Click to expand...
Click to collapse
OMG, why always there are installation error when a non-SL user build things for us!
Sent from my GT-I9003 using XDA Premium App
fxzy said:
OMG, why always there are installation error when a non-SL user build things for us!
Sent from my GT-I9003 using XDA Premium App
Click to expand...
Click to collapse
Obviously he has no device to test it that's why, do not complain we don't need your complain around here.
Not working, same error 6
Sent from my GT-I9003 using XDA App
hey netchip...acc to ur updater script,there should be a tmp folder in .zip...but there is no such folder...probably that is causing the error!
sakindia123 said:
hey netchip...acc to ur updater script,there should be a tmp folder in .zip...but there is no such folder...probably that is causing the error!
Click to expand...
Click to collapse
You are wrong... the problem is not there. Maybe the issue is cause by
Code:
write_raw_image
i'm not sure it can works on our phone.... maybe netchip can try with bmlwrite binary...
Another thing.... to test this kernel:
-extract the normalboot.img and flash it with heimdall;
or
- extract normalboot.img ---> pack it into a .tar --->flash with Odin
Omg, I go make Odin/Heimdall package. I make it also abiable.for rom managrr
Sent from my GT-I9100 using XDA App
thanks you ! continue ur nice work
http://4pda.ru/forum/index.php?s=&showtopic=295277&view=findpost&p=11411678
Tried to download but its saying that they are moved or deleted, so can someone please upload them again.....
mj.vikram said:
Tried to download but its saying that they are moved or deleted, so can someone please upload them again.....
Click to expand...
Click to collapse
Now throw off on XDA
http://www.mediafire.com/?e21fbmccmch35lx
That's it!
Serp87 said:
http://4pda.ru/forum/index.php?s=&showtopic=295277&view=findpost&p=11411678
Click to expand...
Click to collapse
what are these modes?? does this modify the options that come when i long press the power button to switch phone off and if yes, does it do something more???
sagarwadhwa1 said:
what are these modes?? does this modify the options that come when i long press the power button to switch phone off and if yes, does it do something more???
Click to expand...
Click to collapse
reboot. recovery . dowload
Serp87 said:
reboot. recovery . dowload
Click to expand...
Click to collapse
XWLA4 compatible ?(titanium rom) ??
and to flash this with CWM ?
sagarwadhwa1 said:
XWLA4 compatible ?(titanium rom) ??
and to flash this with CWM ?
Click to expand...
Click to collapse
Yes
Serp87 said:
Yes
Click to expand...
Click to collapse
shouldn't this be in android development section then ??
sagarwadhwa1 said:
shouldn't this be in android development section then ??
Click to expand...
Click to collapse
This is a common theme. placed on top of the firmware itself
Titanium
Flashed this package and got infinite boot loop
Sent from my GT-I9103 using Tapatalk 2
Serp87 said:
This is a common theme. placed on top of the firmware itself
Titanium
Click to expand...
Click to collapse
i flashed it and it removed the ics transitions and the ics like look and gave another look and it was quite laggy, so i removed it, above all, it removed my 14 toggle mod... :/
sagarwadhwa1 said:
i flashed it and it removed the ics transitions and the ics like look and gave another look and it was quite laggy, so i removed it, above all, it removed my 14 toggle mod... :/
Click to expand...
Click to collapse
did u wiped cache ?
xlm13x said:
Flashed this package and got infinite boot loop
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
It should not beI have everything working*well
akshatsourav said:
did u wiped cache ?
Click to expand...
Click to collapse
yes i did, and its not about the cache, this mod overwrites the files i think that are resposible for the 14 toggle mod and as it has its own transition effects, it overwrote the ICS ones from titanium rom, however the worst part was that when i tried to get the menu after long pressing power key to restart, it was freakishly laggy and the notification bar was also quite laggy, so i switched back to my original config, titanium 2.1 with 14 toggle mod..
I knocked this together for the i9300, and thought I'd add the i9305 to the list too.
Obviously I've not tested it as I don't have a 4G one yet.
Anyhow, there's two mods, one that removes the Blocking Mode icon (just the 'enabled' icon from the notification area) and also adds the Smart Rotate option into the Display config menu. The other just adds the Smart Rotate option, and leaves the Blocking Mode alone.
Original Post is here http://forum.xda-developers.com/showthread.php?t=1943987, if someone test's and lets me know (you may need to do a Dalvik wipe, especially if on an Odex rom). If you then let me know when new Framework version other than XXALI9 comes out I'll keep it upto date.
going to test now I really wanted this feature
Sent from my GT-I9305 using xda app-developers app
btemtd said:
going to test now I really wanted this feature
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Tested On DEODEXED XXALI5 and It flashes normally, I wiped Dalvik Cache, Boots up fine but there is abosolutley no change in settings. Is this because I need to be on XXALI9 ? I dont see how the Firmware versoin could be the problem they are the exact same file name and structure. One thing tho why isnt there a deodexed version of this because i have a feeling this is the problem. I checked in system/app and the file name Secsettings.apk Is still the original one no date change or size change
Flashed here over ripper rom and blocking icon shows here too
Sent from my GT-I9305 using xda premium
What about smart stay
Sent from my GT-I9305 using xda app-developers app
I think this is not working because it is mounting the wrong partition for system in the updater script.
I have followed Препод's instructions to activate the smart rotation uploaded here. Tested and working for me
http://db.tt/u2Ucus10
Hope this is ok the_ape
txr33 said:
I think this is not working because it is mounting the wrong partition for system in the updater script.
I have followed Препод's instructions to activate the smart rotation uploaded here. Tested and working for me
http://db.tt/u2Ucus10
Hope this is ok the_ape
Click to expand...
Click to collapse
Is there a thread that goes with the file you posted the link to?
EDIT: I found the thread but please can you confirm this works on the i9305 and not just the i9300? Thanks.
txr33 said:
I think this is not working because it is mounting the wrong partition for system in the updater script.
I have followed Препод's instructions to activate the smart rotation uploaded here. Tested and working for me
http://db.tt/u2Ucus10
Hope this is ok the_ape
Click to expand...
Click to collapse
You are a GENIUS TXR33. WORKS LIKE A CHARM! And thanks The_ape for starting the thread you may want to use TXR33 zip for our I9305
btemtd said:
You are a GENIUS TXR33. WORKS LIKE A CHARM! And thanks The_ape for starting the thread you may want to use TXR33 zip for our I9305
Click to expand...
Click to collapse
Tested as well and seems to work fine so thanks TXR33 for the heads up. However I also have another option there now "Screen Candy" but it tells me that settings has stopped responding if I select it. Anyone know about that?
chippyuk said:
Tested as well and seems to work fine so thanks TXR33 for the heads up. However I also have another option there now "Screen Candy" but it tells me that settings has stopped responding if I select it. Anyone know about that?
Click to expand...
Click to collapse
Ahh just saw that. I must of removed one too many lines. Ill have to re do and put up. I didn't notice until you posted that.
Sent from my GT-I9305 using XDA Premium HD app
txr33 said:
Ahh just saw that. I must of removed one too many lines. Ill have to re do and put up. I didn't notice until you posted that.
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
Yehhh LOL i just saw that too Please let me know when you re-upload that, so i can re-flash it
Re uploaded it with the_apes apk looks all good. Sorry
http://db.tt/E2uspos3
Sent from my GT-I9305 using XDA Premium HD app
txr33 said:
Re uploaded it with the_apes apk looks all good. Sorry
http://db.tt/E2uspos3
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
GREAT! Thanks!
So is the "Screen Candy" a blip? or is it a real option?
Also not sure if it is possible but if it is repacked again and you can change the wording it really should read ...angle of sight and NOT "sights"
txr33 said:
Re uploaded it with the_apes apk looks all good. Sorry
http://db.tt/E2uspos3
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks Champ
txr33 said:
Ahh just saw that. I must of removed one too many lines. Ill have to re do and put up. I didn't notice until you posted that.
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks guys, like I said not having a device is an issue. I'll fix the zip shortly.
chippyuk said:
GREAT! Thanks!
So is the "Screen Candy" a blip? or is it a real option?
Also not sure if it is possible but if it is repacked again and you can change the wording it really should read ...angle of sight and NOT "sights"
Click to expand...
Click to collapse
Not too sure what screen candy is but to change sights to sight can be done in the strings.xml easily
Sent from my GT-I9305 using XDA Premium HD app
txr33 said:
Not too sure what screen candy is but to change sights to sight can be done in the strings.xml easily
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
You know what? I'd not noticed the Sights thing either, and it's in the N2's Samsung OEM firmware too! hey ho.
the_ape said:
You know what? I'd not noticed the Sights thing either, and it's in the N2's Samsung OEM firmware too! hey ho.
Click to expand...
Click to collapse
Well maybe thats another usefull option we can use lol... What is screen candy meant to do
the_ape said:
You know what? I'd not noticed the Sights thing either, and it's in the N2's Samsung OEM firmware too! hey ho.
Click to expand...
Click to collapse
Right, uploading fixed versions now, they don't correct the English mistakes, I'll do that later when I have some more time. But they do now mount the right partition, there's me just assuming it would be the same one as the i9300!
Anyhow's thanks all for the testing, and I will get to fixing the English in it, good catch all I've updated the OP
But
With Both features enabled https://www.dropbox.com/s/s5ntlnp45...Remover_With_Smart_Rotate-i9305-XXALI9-V2.zip
With just Smart Rotate https://www.dropbox.com/s/gi7wdukij5q8ade/S3-i9305-Smart-Rotate-Enable-XXALI9-V2.zip
btemtd said:
Well maybe thats another usefull option we can use lol... What is screen candy meant to do
Click to expand...
Click to collapse
All screen candy does is start the Android EasterEgg, you can do it yourself and see why they call it that...
Goto Settings, About Device and then fast tap Android version, then you get the smiling Jelly Bean, now tap and hold the Big Jelly.... Screen Candy
Fresh from the kitchen comes ....
Plain-Andy
For the Samsung Relay 4G
ROM: Download Here!
Gapps: Download here
Installation instructions:
Be sure before anything you are on latest firmware and modems
Be sure you are on latest CWM Recovery found here
Wipe data/factory reset,
Wipe Cache Partition,
Wipe Dalvik Cache (under advanced),
format /system (under mounts and storage)
Flash Rom And Gapps
Reboot to profit
Credits to:
Team Vanir
CarbonRom
OmniRom
SlimRoms
Evervolv
LiquidSmooth
Source
Special mention to @driodmaster92 from IllusionRoms
and @Snuzzo for his help and hard work
Known Bugs:
MHL
Keyboard Backlight (will be fixed in Official Build)
Reserved
Any other bugs please report to me via pm. MHL will always be an issue and release version will be out soon.
Sent from my LG-VS980 using Tapatalk 4
Thanks for the work!! It's a great ROM
Sent from my SGH-T699 using XDA Premium 4 mobile app
I've poked around this on my dev phone for a few minutes. The Themes provider FCs whenever you try and set any setting using it (Theme, notification sound, ring tone, to name a couple), and so a few settings seem a little broken. Also, the backlights for the buttons and physical keyboard are not working. EDIT: Also, the OSK crashes when you try and do gesture typing. EDIT2: When the display falls asleep, looks like it won't rewake. Since the button backlights aren't working, I can only go by the fact that the charging light turns off when I unplug it to know that the phone is still actually operating.
Logcat for Theme Chooser operations please. Half tempted to get rid of it anyway.
Sent from my LG-VS980 using Tapatalk 4
Snuzzo said:
Logcat for Theme Chooser operations please. Half tempted to get rid of it anyway.
Sent from my LG-VS980 using Tapatalk 4
Click to expand...
Click to collapse
Looks like it's an SELinux issue.
It is and can't get it to stinking build again with the updates I did. Grrrr
Sent from my LG-VS980 using Tapatalk 4
Snuzzo said:
It is and can't get it to stinking build again with the updates I did. Grrrr
Sent from my LG-VS980 using Tapatalk 4
Click to expand...
Click to collapse
@Snuzzo BT working on non nexus devices?
driodmaster92 said:
@Snuzzo BT working on non nexus devices?
Click to expand...
Click to collapse
It is.
Sent from my LG-VS980 using Tapatalk 4
Hi, Any news on when the updated version of this will be released? Thanks!
kiboy6 said:
Hi, Any news on when the updated version of this will be released? Thanks!
Click to expand...
Click to collapse
>Last post was in March
Any day now, man.
TPMJB said:
>Last post was in March
Any day now, man.
Click to expand...
Click to collapse
Great - looking forward to it! Thanks
What is Plain Andy rom ?
I haven't been able to find any info on it ...
yohan4ws said:
What is Plain Andy rom ?
I haven't been able to find any info on it ...
Click to expand...
Click to collapse
What exactly do you want to know?
kiboy6 said:
Great - looking forward to it! Thanks
Click to expand...
Click to collapse
...I don't think you understand sarcasm. Looks like this rom has been abandoned.
TPMJB said:
...I don't think you understand sarcasm. Looks like this rom has been abandoned.
Click to expand...
Click to collapse
That was a very unappreciative comment. If all of you don't want a build, then all means I'll stop working on device support for this rom.
Snuzzo said:
That was a very unappreciative comment. If all of you don't want a build, then all means I'll stop working on device support for this rom.
Click to expand...
Click to collapse
Not all, I'm waiting for a new build since I try the first, its a really awesome ROM, the kind of ROM I really want. I hope you don't stop working for our device, your work its really appreciate and awesome
Snuzzo said:
That was a very unappreciative comment. If all of you don't want a build, then all means I'll stop working on device support for this rom.
Click to expand...
Click to collapse
I don't understand the anger. The last post was in March. Is it not safe to assume it's been abandoned?
I don't even know who you are, other than another forum member.
TPMJB said:
I don't understand the anger. The last post was in March. Is it not safe to assume it's been abandoned?
I don't even know who you are, other than another forum member.
Click to expand...
Click to collapse
He is the main developer of this rom....im the device maintainer....i'd suggest no negativity....ive been working on alot of crap and have a child to take care of...it will come dont worry