Database Info

[Q] Android Revolution no USB Debugging

I need help please!! I Flashed the Android Revolution on my HTC Inspire justa as the instructions said, but now I cannot connect USB Debugging. I have checked the box and get the message for USB Debugging, but it will just connect as charge only and I dont get the UAB Debugging message in the status bar. i have re flashed 3 times and same issue. I cannot flash the recommended radio because I cannot connect UAB Debugging. Also giving me problems connecting as a disk drive.

seems that usb drivers are broken.You can try downloading PDAnet and install it on your pc i think it downloads yous phone's drivers

Usb drivers for your android phone

USB Drivers are let your PC communicate with your device.
If you are executing some ADB Commands, you will need USB Drivers installed which will let the ADB server on your PC communicate with the ADB client on your device. If there are no USB Drivers installed on your PC, you will not be able to perform activities on your device via the PC.
First of All I would recommend you to install Universal ADB Driver Installer.The Universal ADB Driver installer detects your phone and installs the ADB drivers for it.This tool developed by drsmart is your solution to the “device not found” error you might get on executing ADB commands.
Universal ADB Driver Installer Download Link - http://adbdriver.com/downloads/
USB DRIVERS
1.SAMSUNG:
--- http://www.samsung.com/us/support/downloads
2.LG
---http://www.lg.com/us/support/mobile-support
3.HTC
---https://support.htc.com/en
4.SONY
---http://developer.sonymobile.com/downloads/drivers/
5.ASUS
---http://support.asus.com/download/options.aspx?SLanguage=en&type=1
6.MOTOROLA
---http://www.motorola.com/sites/motodev/us-en/motodev_lp.html
MORE DEVICES WILL BE UPDATED

Thanks for the info. I tried the univ adb driver installer but it showed I already had the right driver installed. Windows explorer can see my phone but other apps like HTC Sync or myphoneexplorer can't. This only happened after I rooted & installed a new rom. Maybe the rom is faulty...

I want Google nexus driver
any one can help me ?

mt6572 driver
Please add driver for mt6572 device

thx. very usefull!

thanks for the updated links.

Gole Maryam said:
I want Google nexus driver
any one can help me ?
Click to expand...
Click to collapse
an universal driver for all Nexus Devices (Phones and Tablets) can be found here:
http://forum.xda-developers.com/showthread.php?t=2513339

No access to USB debug
I give up and need some professional help...Ya both kinds.
Here we go, I have the Galaxy 3 d2att I747
Rooted
I was running CM 10.2 with latest nightly, I think 20131208 and decided to update to CM11 via my Cyanogenmod updater but before I did I had read somewhere I should change from CWM recovery to TWRP so I downloaded Goomanager and updated to the TWRP version for my phone then went for the KitKat update and thats when the trouble began.
I am now stuck in a boot loop even if I try to boot into TWRP all I get is the TWRP boot logo then straight into boot loop again. I am almost positive I did a factory wipe as well as cache/dalvik.
Not being able to use TWRP to get into recovery I thought I would just use Odin but I can't get any of my laptops to recognize the phones USB, I just get the windows usb driver error and have tried to install the drivers manually via device manager using my samsung 7 chronos with windows 8.1 and my acer with windows 7. I updated drivers using Samsung Kies and from the website, no luck.
I also ventured into an area that I have no expertise in but I guess thats how we learn so I downloaded the Android SDK thinking I could use it to download and install the google USB drivers that way, but I can't get out of boot loop to make sure USB debugging is checked. The only thing I can access is the stock download mode which would be great if I could use the USB connection.
What am I missing? Any suggestions?

USB Not Recognized Error
I noticed that my phone suddenly stopped being recognized on both my Windows 7 and Win8 laptops. I have been trying to fix it with the drivers but to no avail. However, I plugged my phone in with a different USB cord and voila it was recognized and working. Maybe this could possibly be a simple fix.

My computer stopped recognizing my Skyrocket
Hi Everyone,
I also am having trouble with my win 7 computer recognizing my Skyrocket suddenly. I have been using several KitKat roms and they have been working just fine, except for some reported bugs that the CM devs are working on. I even was able to connect to the computer and explore both my internal and external drives. Then suddenly that stopped and the computer gave me a need to get drivers warning. I've tried to download drivers from Samsung and the computer says they are already installed. I also tried the universal driver download and got the same message. Any help would be appreciated. Like the others on this forum, I wouldn't be able to odin if I got in trouble.
Thanks for your concideration,
drewfs7270

I switched to a different rom and now it's working again !
Sent from my SAMSUNG-SGH-I727 using Tapatalk

Thanks.. :good: usefull

Also, any mobile manufacturer website has guides or direct downloads for drivers. Otherwise uni drivers suffice.....
Sent from my Nexus 5 using xda app-developers app

mtk preloader driver unable to install/unplugged appears
mt65xx unplugged when I try installing my device, I tried uninstalling all preloader vcom drivers in my laptop then restart and when I try to connect my device mtk mt65xx preloader just pops up in device manager then suddenly disappears and unknown device shows instead. I also tried manually update driver for unknown device then select the folder where my mtk driver is saved still unsuccessful? I've also searched and tried many other ways out there still no luck. Can anybody give me a solution? By the way i'm using windows 7 x64.

Delted
Edit: Deleted

soft brick
I face bad experienced, the tablet can not boot ( after install TWRP ) but enable to enter the fastboot mode and can be detected by the computer as android adb interface but adb can't communicated with the tablet. (list of devices atached)
I do have a backup file ( I make it before soft brick, I make backup using dd command, because I don't have cwm/twrp recovery ).... but how to flash it ? Tablet chipset is wonder media 8980 OS android 4.2.2
I can not flash it by adb/fastboot.
Maybe someone here can give me a little guide for how to....
I really appreciate for your kindness

Hey, I made an expirience, which might help other users as well.
I have a Sony device (Z1C) and use Windows 10, maybe this will help for other brands and for other Windows 10 users.
I installed drivers for my device and was able to use adb. When I put the phone into fastboot mode, it was not recognized anymore. I found out, Sony has a seperate (updated, maybe?) driver for fastboot mode. When I tried to install this, the driver was not signed and Windows refused to install it. However, you can enter the UEFI (successor of BIOS) and enable installation of unsigned drivers (at own risk). Then I was able to install the fastboot driver and controll my phone in fastboot mode as well as in adb mode.
In conclusion: You might think you installed drivers, because you did, but maybe you did not.

Even on LineageOS page, many people fail to mention that, you DON'T and SHOULDN'T install any generic or universal ADB driver if you have Samsung device. As you can just install Samsung USB Drivers officially from Samsung site. Samsung USB Drivers already contain ABD interface driver just fine so Universal ADB driver is redundant for Samsung phones.

[Q] USB port not working or is it working?

Hello
I have owned this HTC Desire S for more than two years now and it is time to retire it to some else in the family and get a new phone.
The problem is I'm running Cyanogenmod on it and the camera will probably not be good enough for the girl that I will give it to.
I want to remove this version of Cyanogenmod but the problem is that the USB port does not allow my computer to detect the phone when I try and flash roms and the like. I need to be able to do this since I have an unclocked bootloader but S-On (Or the other way, point is I need a PC to flash) The weird this is that although I am unable to switch to mass storage on a PC I can access the mass storage function on a TV using the same USB cable. I have been able to play all sorts of files but my computer just cannot read anything.
Does anyone have a clue what the problem could be?
Thanks for any of the replies and help I will get.

What operating system is on your pc?
Have you tried different USB ports on the PC?

it may be ur custom rom fault to for eg . i encountered sam problem with pacman rom later i flashed SVHD Rom and problem solved

try OEM cable!
had o problem with samsung phones!
try to use an new original cable or old but make sure is not broken!

Phone not detected by PC yet charges?

HTC One S4
Alright, I've looked into this for quite a bit. There's 3 things I've found:
- Change charging cable (done)
- Install HTC Sync (done)
- The USB connector port on the phone could be broken (hope not)
Anything else I can look into?
- Rom is ViperOneS JB
I believe I've tried ADB devices, I haven't really done any sort of ROM changing so I've forgotten much of this, but I believe ADB devices doesn't show any available devices.
EDIT: Another thing to add is that the PC recognises the phone when in CWM but doesn't mount the device such that I can access the files.
EDIT 2: I tried Fastboot USB, only comes up as Fastboot AC :/

Another thing: I charge my phone using a dodgy eBay USB cable, I didn't use this for connecting to the PC but whenever I plug in the charger the phone says to unlock in order to access files on the PC (as it would if my PC detected the phone).

Sorry to sound desperate but I need a response, fast!

Uninstal htc sync.
Instal latest HTC drivers & adb.
PS
Windows 8.1 have a problem with driver.

It says the device connected to the PC has "malfunctioned". I deleted HTC Sync, haven't updated ADB cos I can't remember the link.

Installed latest adb, no avail.

http://forum.xda-developers.com/showthread.php?t=2217396
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/

I already have those.

Anyone at all know anything?

Bump :/

It does say unlock to access phone storage on computer and then when I do, nothing happens.

I have the same issue, and I've tried to access my One S from multiple computers (different usb ports, 2.0, hub, et.c., Windows, OSX, Linux) and nothing seems to do the trick. I'm completely locked out from switch recovery (TWRP installed but can't be accessed, possibly due to old 1.13 hboot).
Sorry not to be able to offer any help, just that I doubt it'll be fixed in your case by switching computers/os/ports et.c. since I've tried most of that already, and I must've been through 10-12 different usb cables by now.
Just about ready to ditch this phone.

Flash the original recovery.

OnePlus One not recognized in My Computer

I tried to access my phone's internal storage but the phone doesn't show in My Computer. The Portable Device in Device manager says MTP USB device and it has the yellow triangle on it. The Samsung driver is the Android Composite ADB Interface with no triangle. I have debugging on but the MTP device driver always fails whether debugging is on or not. I used Koush's drivers found here on XDA but same old thing. The Portable Device used to show up as A0001 and /or One but now it doesn't and I don't understand how that happened. Can someone enlighten me and perhaps solve this problem? It's been very frustrating as I just spent 13 hours trying to get my phone working (Thanks Heisenberg for fixing) and now another 6 trying to figure this out. Please HELP if you can. Thanks!

kristorm said:
I tried to access my phone's internal storage but the phone doesn't show in My Computer. The Portable Device in Device manager says MTP USB device and it has the yellow triangle on it. The Samsung driver is the Android Composite ADB Interface with no triangle. I have debugging on but the MTP device driver always fails whether debugging is on or not. I used Koush's drivers found here on XDA but same old thing. The Portable Device used to show up as A0001 and /or One but now it doesn't and I don't understand how that happened. Can someone enlighten me and perhaps solve this problem? It's been very frustrating as I just spent 13 hours trying to get my phone working (Thanks Heisenberg for fixing) and now another 6 trying to figure this out. Please HELP if you can. Thanks!
Click to expand...
Click to collapse
Even I had faced this problem on Windows 8. I had installed drivers 4-5 odd times. But later I just flashed CM11S zip via recovery and enabled USB Debugging Mode and it finally got recognized on my laptop.
I was facing many issues with all lollipop ROMs. Hence I reverted back and now everything is working fine.

I, too am using CM11s as Lollipop has too many bugs for me at this time. Maybe I'll try re-flashing CM and see what happens. Thanks for the reply

My question is: How can one flash from recovery when the file that needs to be flashed cannot be sent to the phone because it's not recognized by the computer?

Nevermind...I figured it out and flashed 11S successfully! Everything shows up now on computer. WOOT!