Related
hi, first of all, i'd like to tell you i'm quite a noob
i have a tf300tg and i tried to flash the jb 4.2.2 that's only available for the 300t.. i'm dumb, i know.. and now in stead of booting it goes directly to the cwm menu and i can't do anything.. i keep getting the error E:Can't mount /cache/recovery/command , .../log and .../last_log
is there anything i can do or should i just throw it in the trashbin ?
iostu said:
hi, first of all, i'd like to tell you i'm quite a noob
i have a tf300tg and i tried to flash the jb 4.2.2 that's only available for the 300t.. i'm dumb, i know.. and now in stead of booting it goes directly to the cwm menu and i can't do anything.. i keep getting the error E:Can't mount /cache/recovery/command , .../log and .../last_log
is there anything i can do or should i just throw it in the trashbin ?
Click to expand...
Click to collapse
Unless you can go into fastboot (Power + volume down) there isn't much to do but to sign a petition & wait...
XDA member HAZARD17 has been running a petition
Sign NVflash petition for Transformer TF300T, Prime & Infinity!
https://www.change.org/petitions/asus-nvidia-revert-changes-in-jb-bootloader-that-prevent-nvflash
vconceicao said:
Unless you can go into fastboot (Power + volume down) there isn't much to doo but to wait...
Click to expand...
Click to collapse
i can't do that either.. it just loads the CWM menu..
wait ? wait for what ? :silly:
iostu said:
i can't do that either.. it just loads the CWM menu..
wait ? wait for what ? :silly:
Click to expand...
Click to collapse
For someone to come up with a solution, Like a NVflash utility for Tf300...
Yeah, but if you want add NVflash support to your tablet, it can't be bricked I'm not quite sure, but you try unpack blob from offical update, and flash all files from unpacked blob (LNX etc.).
Hazard17 said:
Yeah, but if you want add NVflash support to your tablet, it can't be bricked I'm not quite sure, but you try unpack blob from offical update, and flash all files from unpacked blob (LNX etc.).
Click to expand...
Click to collapse
i can't flash anything :| in adb it sais <waiting for device> i've tried everything and i can't get it to work.. can you pleeeeeease help me ?
ok, i reinstalled the adb drivers for the transformer, and it goes into bootloader but there is no usb icon.. only RCK, the android and wipe data.. when i type adb devices i get 123456789ABCDEF recovery. although i can't do much else, i can't do anything in adb shell, i can't even flash the twrp.. any suggestions ? plese please please
iostu said:
ok, i reinstalled the adb drivers for the transformer, and it goes into bootloader but there is no usb icon.. only RCK, the android and wipe data.. when i type adb devices i get 123456789ABCDEF recovery. although i can't do much else, i can't do anything in adb shell, i can't even flash the twrp.. any suggestions ? plese please please
Click to expand...
Click to collapse
The USB icon is gone. I sugguest downloading the correct firmware and flashing it with fastboot.
fastboot flash system blob
Download the correct system firmware, open the zip, open the zip, extract the blob to the same directory as fast boot.
iostu said:
ok, i reinstalled the adb drivers for the transformer, and it goes into bootloader but there is no usb icon.. only RCK, the android and wipe data.. when i type adb devices i get 123456789ABCDEF recovery. although i can't do much else, i can't do anything in adb shell, i can't even flash the twrp.. any suggestions ? plese please please
Click to expand...
Click to collapse
4.2 bootloader does not have USB icon, just plug in USB..
i can get to the bootloader menu but only after typing adb reboot bootloader. and then i tryed flashing the blob using adb fastboot -i 0x0b05 flash system blob and then i get "sending 'system' <799764 KB>..." and it's stuck there.. i left it over 30 mins and still nothing
edit: i somehow managed to flash teh system blob (i tried with te 4.1.1 and the 4.2.2) but after flashing it did the exact same thing.. went to CWM ! i even managed to flash the TWRP.blob, and still the CWM showed up.. i can't figure out how is this even possible :| and from the bootloader menu if i go to boot the android firmware, it almost boots (it goes to the lockscreen for about 2 secs) and then reboots again.. am i wasting my time or should i throw it in the garbage ?
thanks again for trying to help me on this one i really appreciate it !
iostu said:
i can get to the bootloader menu but only after typing adb reboot bootloader. and then i tryed flashing the blob using adb fastboot -i 0x0b05 flash system blob and then i get "sending 'system' <799764 KB>..." and it's stuck there.. i left it over 30 mins and still nothing
edit: i somehow managed to flash teh system blob (i tried with te 4.1.1 and the 4.2.2) but after flashing it did the exact same thing.. went to CWM ! i even managed to flash the TWRP.blob, and still the CWM showed up.. i can't figure out how is this even possible :| and from the bootloader menu if i go to boot the android firmware, it almost boots (it goes to the lockscreen for about 2 secs) and then reboots again.. am i wasting my time or should i throw it in the garbage ?
thanks again for trying to help me on this one i really appreciate it !
Click to expand...
Click to collapse
Sounds like you're in the same boat as the rest of us...
http://forum.xda-developers.com/showthread.php?t=2179874
iostu said:
ok, i reinstalled the adb drivers for the transformer, and it goes into bootloader but there is no usb icon.. only RCK, the android and wipe data.. when i type adb devices i get 123456789ABCDEF recovery. although i can't do much else, i can't do anything in adb shell, i can't even flash the twrp.. any suggestions ? plese please please
Click to expand...
Click to collapse
OK. The bootloader menu you now are seeing is the new 4.2 version. RCK - Android - Wipe Data(do not use wipe data).
When you get into this menu if you leave everything alone your tablet should auto into fastboot - watch the screen - upper left.
With fastboot flash the latest (proper) JB blob for your unit.
Good Luck!
iostu said:
i can get to the bootloader menu but only after typing adb reboot bootloader. and then i tryed flashing the blob using adb fastboot -i 0x0b05 flash system blob and then i get "sending 'system' <799764 KB>..." and it's stuck there.. i left it over 30 mins and still nothing
edit: i somehow managed to flash teh system blob (i tried with te 4.1.1 and the 4.2.2) but after flashing it did the exact same thing.. went to CWM ! i even managed to flash the TWRP.blob, and still the CWM showed up.. i can't figure out how is this even possible :| and from the bootloader menu if i go to boot the android firmware, it almost boots (it goes to the lockscreen for about 2 secs) and then reboots again.. am i wasting my time or should i throw it in the garbage ?
thanks again for trying to help me on this one i really appreciate it !
Click to expand...
Click to collapse
You can't flash anything using adb commands. You need to use fastboot. Look in the forum for the proper procedure and follow the instructions.
Nowhere does it say type "adb fastboot ... anything...."
hgoldner said:
You can't flash anything using adb commands. You need to use fastboot. Look in the forum for the proper procedure and follow the instructions.
Nowhere does it say type "adb fastboot ... anything...."
Click to expand...
Click to collapse
Here is an example of an adb command that does work to flash twrp with slight modification it will flash stock blob as well.
adb shell
su
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4 Then reboot to complete installation.
adb reboot
I don't know where you are getting your information but you need a new source.
No one said type adb fastboot they are two different things and each has a specific structure to follow.
If the op can get either fastboot or adb to work I'll gladly provide the proper commands.
then you have the same problem as me and a bunch of other people. The bootloader freezes on the flash command, even though it will show success and stuff. It never flashes.
I can push files with ADB and on reboot the files on gone. Since we can't flash with fastboot. We have to send it in to asus at this point. I got quoted $87 + shipping.
sorry, i meant to say just fastboot. i didn't write adb fastboot.. i've tried everything you guys said, but with no success my last resort is to send it to asus for re-softing. It costs about $80 + shipping. It doesn't sound like a lot of money, but it's a price to pay for stupidness or noobness i just hope they can repair it or otherwise i'll have a very expensive thing on whch to chop onions
thanks again guys for helping me
HI all,
I am VERY new to this custom ROM stuff, and I am a bit confused. I have an ASUS TF300T Transformer Tablet. It has 4.2.1 loaded, build is JOP40D.US_epad-10.6.1.12.3-20130416. If more particulars are needed, I can provide.
I have rooted the tablet (I used motochopper to gain superuser access), thinking that would allow me to load a custom ROM. I was WRONG (as most of you probably know). I want to load a custom ROM (CyanogenMod), and also not use the ASUS preloaded software. I want something with less bloat, is faster, and something I can customize at will.
So....I have read a ton of posts on this, but I can't seem to find a step by step single, simple process to accomplish this daunting task. Simply put, I need step by step instructions that can get me where I want to be. At this point, I'm not so sure I could be more confused! LOL!
Anyone who has done this, or is experienced with this, I could use some major league assistance!
I want a faster, more "open" tablet. I also know I don't want to brick it. I definitely don't need a 300.00 paperweight!
Any help would be greatly appreciated.
Thanks!!
Scar!
robscar said:
HI all,
I am VERY new to this custom ROM stuff, and I am a bit confused. I have an ASUS TF300T Transformer Tablet. It has 4.2.1 loaded, build is JOP40D.US_epad-10.6.1.12.3-20130416. If more particulars are needed, I can provide.
I have rooted the tablet (I used motochopper to gain superuser access), thinking that would allow me to load a custom ROM. I was WRONG (as most of you probably know). I want to load a custom ROM (CyanogenMod), and also not use the ASUS preloaded software. I want something with less bloat, is faster, and something I can customize at will.
So....I have read a ton of posts on this, but I can't seem to find a step by step single, simple process to accomplish this daunting task. Simply put, I need step by step instructions that can get me where I want to be. At this point, I'm not so sure I could be more confused! LOL!
Anyone who has done this, or is experienced with this, I could use some major league assistance!
I want a faster, more "open" tablet. I also know I don't want to brick it. I definitely don't need a 300.00 paperweight!
Any help would be greatly appreciated.
Thanks!!
Scar!
Click to expand...
Click to collapse
You need a custom recovery! download twrp here: http://techerrata.com/browse/twrp2/tf300t
DOWNLOAD THE ONE THAT SAYS "openrecovery-twrp-2.5.0.0-4.2" and flash it with fastboot in cmd " fastboot -i 0x0B05 flash recovery twrp.blob" make sure you rename the blob to "twrp.blob"
*update your info your bootloader is "10.6.1.15.3" instead of "10.6.1.12.3"
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
You can also follow this guide. It explains what you need to do pretty well. But you do need a custom recovery, which i prefer TWRP http://forum.xda-developers.com/showthread.php?t=2187982
I was confused at first too. I think they need to change the wording in the tutorials. They say "If you're on JB bootloader, this twrp, if you're on 4.2 BL, that TWRP" and i was just thinking... WTF, both of them, 4.1 and 4.2 are jellybean.... it should be changed to 4.1 BL and 4.2 BL, none referred to as JB.
Sent from my TF300T using Tapatalk 2
So...does my tablet need to be unlocked first? What do I do once TWRP is loaded on my tablet? When you say "flash it with fastboot in cmd " fastboot -i 0x0B05 flash recovery twrp.blob". What does this mean? This is where it gets very confusing.
robscar said:
So...does my tablet need to be unlocked first? What do I do once TWRP is loaded on my tablet? When you say "flash it with fastboot in cmd " fastboot -i 0x0B05 flash recovery twrp.blob". What does this mean? This is where it gets very confusing.
Click to expand...
Click to collapse
if you installed root on your device you should have adb and fastboot, right?
if you are on windows(pc) press the windows key + the R key and type cmd in the search box, then press enter now navigate to the adb/fastboot directory on your pc by typing "cd <the location of the file>" then plug in your tablet in fastboot and type " fastboot -i 0x0B05 flash recovery twrp.blob" what does this do? this command flashes twrp over the stock recovery, with twrp you can install custom roms! after you have done this download a rom you like (watch out for bootloader versions! if you are on stock 4.2.1 i would reccomend the latest unofficial AOKP or the latest official cm10.1) if you download a rom you can see it is a zip file, place this zip file on your sdcard and power up your tablet in bootloader by holding volume down + power button till icons pop up! now press the volume up key when the RCK icon is blinking! now twrp should start, now click on wipe and then advanced wipe and wipe system data cache(you don't need to wipe your data if you prefer to keep it!) now go back to the main menu of twrp by pressing the home button in the top right corner, now click install and navigate to the directory you have placed the rom in, after install reboot!
I've a TF300TG but I think my question is associated to the title of this thread. Do I have to note the sku of my Pad or isn't that important when I flash a custom Rom?
In the threads of many custom Roms I've read nothing about the sku. So I'm not sure if I have to take care for this.
Sent from my HTC One X using xda app-developers app
noahvt said:
if you installed root on your device you should have adb and fastboot, right?
if you are on windows(pc) press the windows key + the R key and type cmd in the search box, then press enter now navigate to the adb/fastboot directory on your pc by typing "cd <the location of the file>" then plug in your tablet in fastboot and type " fastboot -i 0x0B05 flash recovery twrp.blob" what does this do? this command flashes twrp over the stock recovery, with twrp you can install custom roms! after you have done this download a rom you like (watch out for bootloader versions! if you are on stock 4.2.1 i would reccomend the latest unofficial AOKP or the latest official cm10.1) if you download a rom you can see it is a zip file, place this zip file on your sdcard and power up your tablet in bootloader by holding volume down + power button till icons pop up! now press the volume up key when the RCK icon is blinking! now twrp should start, now click on wipe and then advanced wipe and wipe system data cache(you don't need to wipe your data if you prefer to keep it!) now go back to the main menu of twrp by pressing the home button in the top right corner, now click install and navigate to the directory you have placed the rom in, after install reboot!
Click to expand...
Click to collapse
OK, first, I am on a MAC. I have "terminal" for CMD lines, so, it should find whatever files I need it to find just as the windows CMD block will.
I have "fastboot and ADB" in a folder on my desktop, I have named the folder "android". I also downloaded the TWRP for 4.2.1 (renamed to TWRP.BLOB). I think I have all the files I require, it's just a matter of what steps to take. I also have the CM 10.1. This is the ROM I would like to use.
I was also reading that using TWRP, I am not supposed to wipe. I guess, theoretically, I want to be able to boot to the original ASUS ROM in case anything goes wrong. Otherwise, I wouldn't have a ROM to boot from.
I'm not sure if everything I am saying is correct, again, I am very new to this and trying to undertand exactly what I am doing.
robscar said:
OK, first, I am on a MAC. I have "terminal" for CMD lines, so, it should find whatever files I need it to find just as the windows CMD block will.
I have "fastboot and ADB" in a folder on my desktop, I have named the folder "android". I also downloaded the TWRP for 4.2.1 (renamed to TWRP.BLOB). I think I have all the files I require, it's just a matter of what steps to take. I also have the CM 10.1. This is the ROM I would like to use.
I was also reading that using TWRP, I am not supposed to wipe. I guess, theoretically, I want to be able to boot to the original ASUS ROM in case anything goes wrong. Otherwise, I wouldn't have a ROM to boot from.
I'm not sure if everything I am saying is correct, again, I am very new to this and trying to undertand exactly what I am doing.
Click to expand...
Click to collapse
The fast boot and adb you have are most likely windows files. Not sure if there is fast boot and adb for Mac.
Sent from my TF300T using Tapatalk 2
diesburg said:
The fast boot and adb you have are most likely windows files. Not sure if there is fast boot and adb for Mac.
Sent from my TF300T using Tapatalk 2
Click to expand...
Click to collapse
I got these files from the SDK download for MAC.
robscar said:
I got these files from the SDK download for MAC.
Click to expand...
Click to collapse
Any possibility of kicking this to the top and maybe getting this tablet accomplished tonight? I believe I have all the files I need (for MAC), and I am ready to go. I just need to know exactly what to do.
HELP!! LOL!!
robscar said:
Any possibility of kicking this to the top and maybe getting this tablet accomplished tonight? I believe I have all the files I need (for MAC), and I am ready to go. I just need to know exactly what to do.
HELP!! LOL!!
Click to expand...
Click to collapse
I can TRY to help. I have no mac, never used one, dont know the procedures for getting the drivers and stuff installed on mac. So, im going to assume you have the fastboot drivers installed properly.
NOTE: IF YOU'RE TABLET BREAKS, NEVER TURNS ON AGAIN, OR GOES UP IN SMOKE BECAUSE OF MY DIRECTIONS, IT'S ALL YOUR FAULT AND RESPONSIBILITY NOT MINE. GET OVER IT AND BUY A NEW ONE.....LMAO.... really though, i am helping as best as i can and you always run a risk flashing devices and thats your risk, not mine.... but if you follow my directions exactly, you will be jsut fine and not have a broken device...
First, make sure you're on the latest update from asus. Should be a bootloader ending in 15.3 and android 4.2.1 .
Second, unlock your bootloader. Unlocking the bootloader is quite simple. Download this: http://d-h.st/86c Install it on the tablet and open the app (its a RAR file so it needs extracted first) Follow the directions it gives you, if i remember correctly, you just click yes or something, tablet reboots, and the bootloaders unlocked. If it sucessfully unlocks, when you first turn the tablet on, in the top left corner of the screen, it will say unlocked.
After bootloaders unlocked, turn the tablet off. Power on the tablet by holding the power button and the volume down button at the same time. This will take you into bootloader mode. One quick thing to make sure you are on the latest bootloader. The bootloader screen should have 3 icons to choose from, if it has 4, you are on the old/wrong bootloader and need to go back and update your system before proceeding. If 3 icons, you're good to go, plug the usb cable in the tablet and in your computer.
Download TWRP recovery now. This is the part where you dont wanna screw up, downloading and flashing wrong recovery can equal a broken tablet. Download this exact TWRP recovery: http://diesburg.co/tf300t/twrp/openrecovery-twrp-2.5.0.0-tf300t-4.2.blob
Put that file in the folder where fastboot is.
Now in your terminal/command line, go to the directory where fastboot is. With tablet plugged in and in bootloader mode like mentioned above and terminal in the fastboot folder, type: fastboot -i 0x0B05 flash recovery openrecovery-twrp-2.5.0.0-tf300t-4.2.blob and press enter .... this will flash TWRP recovery to your tablet using fastboot.... if you get something like "waiting for device" in your terminal window after typing this and it never gets past that, thats where i cant help, drivers for fastboot or something isnt right.... if it works, hell yea, onto the next step....
Reboot the tablet, type: fastboot -i 0x0B05 reboot and press enter.... let android fully boot up, copy your ROM to your tablet and dont forget the gapps package for the rom..... now turn the tablet back off......
power the tablet back on like before holding power button and volume down.... once in here, RCK will already be highlighted, if its not, use your volume down key to get it highlighted... once highlighted, hit volume up and this will boot the twrp recovery you flashed......
Once in TWRP, (FIRST DONT FORGET CLICK BACKUP AND MAKE A BACKUP OF YOUR CURRENT ROM!!!) now, make sure you can see your cyanogenmod rom file and gapps by clicking install and going to the ocation where its at, if you see the 2 files, click the back button to the main screen.... on the main screen, click : Wipe, then click factory reset.....after that, go back to the wipe screen, and click system to wipe the system partition..... now go back to the main screen again....
Click install, then click to install the cyanogenmod rom.... after it installs, install the gapps package.... after that, you SHOULD be good to go, reboot the tablet by clicking reboot to system.....
I think that covers everything..... now in the future for flashing other roms, always wipe before flashing and flash the roms the same way you did this one.... just so you know, not ALL roms require gapps package.... most specify whether they do or not....
Any problems, let me know unless its the "waiting for device" thing, i cant help with mac drivers, someone else will have to
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
diesburg said:
I can TRY to help. I have no mac, never used one, dont know the procedures for getting the drivers and stuff installed on mac. So, im going to assume you have the fastboot drivers installed properly.
NOTE: IF YOU'RE TABLET BREAKS, NEVER TURNS ON AGAIN, OR GOES UP IN SMOKE BECAUSE OF MY DIRECTIONS, IT'S ALL YOUR FAULT AND RESPONSIBILITY NOT MINE. GET OVER IT AND BUY A NEW ONE.....LMAO.... really though, i am helping as best as i can and you always run a risk flashing devices and thats your risk, not mine.... but if you follow my directions exactly, you will be jsut fine and not have a broken device...
First, make sure you're on the latest update from asus. Should be a bootloader ending in 15.3 and android 4.2.1 .
Second, unlock your bootloader. Unlocking the bootloader is quite simple. Download this: http://d-h.st/86c Install it on the tablet and open the app (its a RAR file so it needs extracted first) Follow the directions it gives you, if i remember correctly, you just click yes or something, tablet reboots, and the bootloaders unlocked. If it sucessfully unlocks, when you first turn the tablet on, in the top left corner of the screen, it will say unlocked.
After bootloaders unlocked, turn the tablet off. Power on the tablet by holding the power button and the volume down button at the same time. This will take you into bootloader mode. One quick thing to make sure you are on the latest bootloader. The bootloader screen should have 3 icons to choose from, if it has 4, you are on the old/wrong bootloader and need to go back and update your system before proceeding. If 3 icons, you're good to go, plug the usb cable in the tablet and in your computer.
Download TWRP recovery now. This is the part where you dont wanna screw up, downloading and flashing wrong recovery can equal a broken tablet. Download this exact TWRP recovery: http://diesburg.co/tf300t/twrp/openrecovery-twrp-2.5.0.0-tf300t-4.2.blob
Put that file in the folder where fastboot is.
Now in your terminal/command line, go to the directory where fastboot is. With tablet plugged in and in bootloader mode like mentioned above and terminal in the fastboot folder, type: fastboot -i 0x0B05 flash recovery openrecovery-twrp-2.5.0.0-tf300t-4.2.blob and press enter .... this will flash TWRP recovery to your tablet using fastboot.... if you get something like "waiting for device" in your terminal window after typing this and it never gets past that, thats where i cant help, drivers for fastboot or something isnt right.... if it works, hell yea, onto the next step....
Reboot the tablet, type: fastboot -i 0x0B05 reboot and press enter.... let android fully boot up, copy your ROM to your tablet and dont forget the gapps package for the rom..... now turn the tablet back off......
power the tablet back on like before holding power button and volume down.... once in here, RCK will already be highlighted, if its not, use your volume down key to get it highlighted... once highlighted, hit volume up and this will boot the twrp recovery you flashed......
Once in TWRP, (FIRST DONT FORGET CLICK BACKUP AND MAKE A BACKUP OF YOUR CURRENT ROM!!!) now, make sure you can see your cyanogenmod rom file and gapps by clicking install and going to the ocation where its at, if you see the 2 files, click the back button to the main screen.... on the main screen, click : Wipe, then click factory reset.....after that, go back to the wipe screen, and click system to wipe the system partition..... now go back to the main screen again....
Click install, then click to install the cyanogenmod rom.... after it installs, install the gapps package.... after that, you SHOULD be good to go, reboot the tablet by clicking reboot to system.....
I think that covers everything..... now in the future for flashing other roms, always wipe before flashing and flash the roms the same way you did this one.... just so you know, not ALL roms require gapps package.... most specify whether they do or not....
Any problems, let me know unless its the "waiting for device" thing, i cant help with mac drivers, someone else will have to
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
So, no matter what I do, the bootloader has to be unlocked, correct?
robscar said:
So, no matter what I do, the bootloader has to be unlocked, correct?
Click to expand...
Click to collapse
for a custom rom, as far as i know, yes
but for just root on stock rom i believe theres ways to root stock without unlocking the bootloader
Sent from my TF300T using Tapatalk 2
I simply cannot seem to get the MAC to do this. I just don't know what command lines to use in the "terminal". I am amazed that no one has flashed their tablet with a MAC.
Anyone who has done this with a MAC, please drop a line if you can. I would really like to get this done if at all possible.
I am unlocked, I get all the way to the "flash" commands, and then it seems to not want to cooperate.
HELP!
robscar said:
I simply cannot seem to get the MAC to do this. I just don't know what command lines to use in the "terminal". I am amazed that no one has flashed their tablet with a MAC.
Anyone who has done this with a MAC, please drop a line if you can. I would really like to get this done if at all possible.
I am unlocked, I get all the way to the "flash" commands, and then it seems to not want to cooperate.
HELP!
Click to expand...
Click to collapse
It's most likely drivers.
http://forum.xda-developers.com/showthread.php?t=1917237
Maybe that'll help?
Sent from my TF300T using Tapatalk 2
I wanted to close out this thread and thank everyone who jumped in to try to assist me. I was not able to flash my tablet, nor get the Cyanogen mod loaded. Not sure why, but, as I try to load TWRP, I get a "permission denied" error.
Eventually, I will get my hands on a windows computer and give this another shot. But, it should have worked on my MAC as easily as anything else. Not sure exactly what I am doing wrong, but, my tablet is working just fine so, I know I did not "mess" anything up (YAY).
If someone has been able to "flash" and put a custom rom on their ASUS Transformer using a MAC computer, please get with me and let's chat!
Again, thanks everyone for taking some time to walk me thru this! I learned a lot, so your efforts did not go to waste! I great appreciate it!
Scar!
robscar said:
I wanted to close out this thread and thank everyone who jumped in to try to assist me. I was not able to flash my tablet, nor get the Cyanogen mod loaded. Not sure why, but, as I try to load TWRP, I get a "permission denied" error.
Eventually, I will get my hands on a windows computer and give this another shot. But, it should have worked on my MAC as easily as anything else. Not sure exactly what I am doing wrong, but, my tablet is working just fine so, I know I did not "mess" anything up (YAY).
If someone has been able to "flash" and put a custom rom on their ASUS Transformer using a MAC computer, please get with me and let's chat!
Again, thanks everyone for taking some time to walk me thru this! I learned a lot, so your efforts did not go to waste! I great appreciate it!
Scar!
Click to expand...
Click to collapse
not sure exactly how a mac works but i believe its some sort of linux. can you by chance start the terminal with "administrator" priveleges or type "su" in the terminal to get root priveleges? Just my thoughts with a "permission denied" error, you dont have administrator/root access.
In that link i shared above about mac and fastboot, it says to use " ./ " in front of every command. So try the fastboot commands i said above to flash the recovery but do it with ./ infront like this: ./fastboot flash commands
Sent from my TF300T using Tapatalk 2
Well, I used Motochopper to root my tablet, so, I'm not quite sure exactly what you mean. So, I am rooted, my BL is unlocked.
My tablets boots in "fastboot", I just can't seem to get the flash done. At this point, I am not so sure I could be more lost. LOL!
robscar said:
Well, I used Motochopper to root my tablet, so, I'm not quite sure exactly what you mean. So, I am rooted, my BL is unlocked.
My tablets boots in "fastboot", I just can't seem to get the flash done. At this point, I am not so sure I could be more lost. LOL!
Click to expand...
Click to collapse
In the steps I told you above. The part where you do the fastboot commands in the terminal. "fastboot flash 0x(somenumber) recovery twrp.blob"
put a ./ in front of the fastboot command... so its "./fastboot flash 0x(thatnumber) recovery twrp.blob"
Sent from my TF300T using Tapatalk 2
So I flash the stock rom on it without thinking and now it wont let me flash a recovery to the tablet threw fastboot or goomanager and it wont update throguh asus update but its booting fine and wont take any updates at all i need help being pointed in the right direction!
I flashed the wrong bootloader i think and how do i flash the correct bootloader without a recover?
in fastboot im getting the error: cannot load 'file name' :no error weather its cm or twrp it wont load it and i dont know what to do please help
First of all it would be important to know what bootloader you are actually on. You do not want to flash a recovery that is not compatible with your bootloader!
So boot into the bootloader with Volume Down and POWER and read the tiny script. From there select the Android with Volume Down and boot back to system with Volume Up.
And then please report in detail what you are trying to do in fastboot, which commands you use etc.
Without knowing what you are doing we cannot tell you what you are doing wrong.....
First step: In fastboot command: fastboot devices - Do you see the serial number of your tab?
berndblb said:
First of all it would be important to know what bootloader you are actually on. You do not want to flash a recovery that is not compatible with your bootloader!
So boot into the bootloader with Volume Down and POWER and read the tiny script. From there select the Android with Volume Down and boot back to system with Volume Up.
And then please report in detail what you are trying to do in fastboot, which commands you use etc.
Without knowing what you are doing we cannot tell you what you are doing wrong.....
First step: In fastboot command: fastboot devices - Do you see the serial number of your tab?
Click to expand...
Click to collapse
bootloader version is us_epad-10.4.4.20-20121026
with a stock rom of 4.1.1
and trying to undo the rom cause im trying to put a stock 4.2.2 on it to get the drivers back on it from the stock rom.
in fastboot i just need to get a twrp installed and i can undo my mess
Skittleskitty said:
bootloader version is us_epad-10.4.4.20-20121026
with a stock rom of 4.1.1
and trying to undo the rom cause im trying to put a stock 4.2.2 on it to get the drivers back on it from the stock rom.
in fastboot i just need to get a twrp installed and i can undo my mess
Click to expand...
Click to collapse
So you are on an ICS bootloader with a JB rom... How the hell did you manage to do that?
You did not answer my question about fastboot. What you tried and what did not work.
But anyway, how I would proceed, just to get you back into safe territory, is to download the latest Asus firmware 10.6.1.14.10, unzip the downloaded file once and copy the resulting zip to the root of your internal SD.
Reboot, and hopefully the stock recovery will recognize the update file and flash you to JB 4.2.1 (which BTW is the latest version for our tabs - there never was, and probably never will be a 4.2.2). Flashing the stock firmware will replace the bootloader.
So from there you just have to get fastboot working, flash the latest TWRP and then the custom rom of your choice COMPATIBLE with your bootloader and recovery.
If that doesn't work we have to try something else. But try this first and report.
berndblb said:
So you are on an ICS bootloader with a JB rom... How the hell did you manage to do that?
You did not answer my question about fastboot. What you tried and what did not work.
But anyway, how I would proceed, just to get you back into safe territory, is to download the latest Asus firmware 10.6.1.14.10, unzip the downloaded file once and copy the resulting zip to the root of your internal SD.
Reboot, and hopefully the stock recovery will recognize the update file and flash you to JB 4.2.1 (which BTW is the latest version for our tabs - there never was, and probably never will be a 4.2.2). Flashing the stock firmware will replace the bootloader.
So from there you just have to get fastboot working, flash the latest TWRP and then the custom rom of your choice COMPATIBLE with your bootloader and recovery.
If that doesn't work we have to try something else. But try this first and report.
Click to expand...
Click to collapse
thank you so much that fixed it!!
ok i did all that but it removed fastboot what do i do to get it back?
Skittleskitty said:
ok i did all that but it removed fastboot what do i do to get it back?
Click to expand...
Click to collapse
Read the text in the upper left corner - current bootloaders enable fastboot in the bootloader menu automatically.
ok i got fastboot working and now it says when i got to flash the recovery it says error cannot open twrp.blob even though its the correct file.
Skittleskitty said:
ok i got fastboot working and now it says when i got to flash the recovery it says error cannot open twrp.blob even though its the correct file.
Click to expand...
Click to collapse
Then maybe it's not in your current directory.
Skittleskitty said:
ok i got fastboot working and now it says when i got to flash the recovery it says error cannot open twrp.blob even though its the correct file.
Click to expand...
Click to collapse
I think your tablet would be a lot safer if you did some reading here: http://lmgtfy.com/?q=fastboot+tutorial
berndblb said:
I think your tablet would be a lot safer if you did some reading here: http://lmgtfy.com/?q=fastboot+tutorial
Click to expand...
Click to collapse
i found that and have been reading it but fastboot still cant read the twrp.blob even though its in the directory with fastboot.
ok ive re installed fastboot and adb sdk and did the environment variable path and it still wont recognize the blob it wont recognize cwm .img files ether and what does key driver not found..booting os
Skittleskitty said:
i found that and have been reading it but fastboot still cant read the twrp.blob even though its in the directory with fastboot.
Click to expand...
Click to collapse
It has to be in your *current* directory.
_that said:
It has to be in your *current* directory.
Click to expand...
Click to collapse
thankyou it moved directorys on me that was the issue
Hi XDA,
I am a complete noob, and this is my first time posting, so bear with me.
Some time ago I rooted and unlocked my TF300 with SuperSu. Recently I wanted to upgrade to 4.4 kitkat. However, my Tablet was stuck at Andriod 4.1 because of the the unlock.
I went to manually update my TF via the Asus website. I installed the 10.6.1.8 using my TWRP 2.5, and Oem 4.1 OS. Installation worked just fine. After install, I booted up and I had 4.2 with everything working correctly.
Next step was to install TWRP 2.7.0.1. I reset my TF and went into RCK to see something went wrong when updating.
My TWRP will not load, and I get the Android on his back with the red triangle when I try to enter RCK.
Thanks in advance!!
I managed to install 10.6.1.27, but it did not change anything with my boot loader.
I downloaded motochopper, but that didn't seem to work, just told me my abt was out of date. SuperSu isn't working now either, "No Binary, There is a problem."
How do I install TWRP 2.7 with no boot loader? Please help.
TallMilk said:
I managed to install 10.6.1.27, but it did not change anything with my boot loader.
I downloaded motochopper, but that didn't seem to work, just told me my abt was out of date. SuperSu isn't working now either, "No Binary, There is a problem."
How do I install TWRP 2.7 with no boot loader? Please help.
Click to expand...
Click to collapse
Most people just install TWRP via fastboot like
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
You could try using other root methods, like Framaroot or Kingo. I think Kingo was reported to work on the latest stock version.
cmendonc2 said:
Most people just install TWRP via fastboot like
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
You could try using other root methods, like Framaroot or Kingo. I think Kingo was reported to work on the latest stock version.
Click to expand...
Click to collapse
I will look into that, but I am pretty sure I was already rooted, unless losing my boot loader means I am no longer rooted.
Another thing, I can't find a twrp.blob for 2.7, just a zip. I have one for 2.5, but that is useless because I already have 4.2. I also have not been able to find a working link to fastboot.
If anyone could give me a link to the fastboot or a link to a tutorial, that would be amazing. I have done my research, but all the lingo and different methods can be mind bending.
Thanks
TallMilk said:
I will look into that, but I am pretty sure I was already rooted, unless losing my boot loader means I am no longer rooted.
Another thing, I can't find a twrp.blob for 2.7, just a zip. I have one for 2.5, but that is useless because I already have 4.2. I also have not been able to find a working link to fastboot.
If anyone could give me a link to the fastboot or a link to a tutorial, that would be amazing. I have done my research, but all the lingo and different methods can be mind bending.
Thanks
Click to expand...
Click to collapse
You can get the img (which substitutes as a blob) from extracting it from the TWRP 2.7 zip file.
1) You will need ADB and fastboot for this: http://forum.xda-developers.com/showthread.php?p=42407269. I would suggest keeping the tablet at least at 50% battery.
2) Install Naked Drivers. This may be optional for you. If you can proceed to the next step without, you won't need it.
3) Enter fastboot by rebooting and holding down the power button. TF300 enters fastboot automatically since this is 4.2 BL.
4) Next we need to enter a command. In side the ADB folder, hold shift and right click. Then select Open command window here.
first check to make sure the device is connected:
Code:
fastboot devices
The device serial number should be listed.
enter command:
Code:
fastboot flash recovery twrp.img -i 0x0b05
Blue bar on device will fill. Be patient.
5) Reboot the Device back into Android. This is an important step.
6.) Go back into TWRP and install what you want.
You are amazing. I will give it a try tonight and report back!
cmendonc2 said:
You can get the img (which substitutes as a blob) from extracting it from the TWRP 2.7 zip file.
1) You will need ADB and fastboot for this: http://forum.xda-developers.com/showthread.php?p=42407269. I would suggest keeping the tablet at least at 50% battery.
2) Install Naked Drivers. This may be optional for you. If you can proceed to the next step without, you won't need it.
3) Enter fastboot by rebooting and holding down the power button. TF300 enters fastboot automatically since this is 4.2 BL.
4) Next we need to enter a command. In side the ADB folder, hold shift and right click. Then select Open command window here.
first check to make sure the device is connected:
Code:
fastboot devices
The device serial number should be listed.
enter command:
Code:
fastboot flash recovery twrp.img -i 0x0b05
Blue bar on device will fill. Be patient.
5) Reboot the Device back into Android. This is an important step.
6.) Go back into TWRP and install what you want.
Click to expand...
Click to collapse
Installed adb fastboot. However, my device does not automatically go into fastboot, I still have to hold down the volume key.
Once I am in fastboot usb (with the 3 icons), I fastboot successfully and get the serial number, then when I type the 'fastboot flash recovery twrp.img -i 0x0b05' command I get this error: cannot load 'twrp.img' : No error
I am attemping to use the 2.7.0.1 twrp from the 4.4.2 page. I have extracted the recovery.img (tried renaming to twrp and left it the same) and placed it in the root of both my external and internal sd.
I have now tried it with .zips .img .blob and I receive the same error everytime. Not sure what I am doing wrong now.
TallMilk said:
Installed adb fastboot. However, my device does not automatically go into fastboot, I still have to hold down the volume key.
Once I am in fastboot usb (with the 3 icons), I fastboot successfully and get the serial number, then when I type the 'fastboot flash recovery twrp.img -i 0x0b05' command I get this error: cannot load 'twrp.img' : No error
I am attemping to use the 2.7.0.1 twrp from the 4.4.2 page. I have extracted the recovery.img (tried renaming to twrp and left it the same) and placed it in the root of both my external and internal sd.
I have now tried it with .zips .img .blob and I receive the same error everytime. Not sure what I am doing wrong now.
Click to expand...
Click to collapse
Put the twrp.img into your ADB folder, where you installed it. Then run the next command.
cmendonc2 said:
Put the twrp.img into your ADB folder, where you installed it. Then run the next command.
Click to expand...
Click to collapse
Awesome! Worked like a charm. twrp 2.7.0.1 installed perfectly.
Then I tried to flash the cyanogenmod. Said it installed fine, but it just gets stuck on the loading screen...
I am trying to do exactly what TallMilk is doing...put Cyanogenmod on my tablet. It is my understanding that I have to unlock my bootloader though? Which I have tried doing a million different ways with the Asus Unlock tool which always gives me an error.
If I follow the instructions posted above I will be able to flash Cyanogenmod without unlocking my bootloader?
SilentSpartan said:
I am trying to do exactly what TallMilk is doing...put Cyanogenmod on my tablet. It is my understanding that I have to unlock my bootloader though? Which I have tried doing a million different ways with the Asus Unlock tool which always gives me an error.
If I follow the instructions posted above I will be able to flash Cyanogenmod without unlocking my bootloader?
Click to expand...
Click to collapse
Finally got it to work. I had to do a wipe first, read about old roms interfering with new installations.
SilentSpartan, I used SuperSU last year to root and unlock my tablet when it was still a 4.0 android to flash to 4.1. This recent update was from 2.5 TWRP on a rooted device running 4.2. When I installed 4.2, it blew away my TWRP, and I had to flash the new TWRP 2.7.0.1.
That flash from OEM fastboot to TWRP 2.7.0.1 is what I needed help with.
TallMilk said:
Finally got it to work. I had to do a wipe first, read about old roms interfering with new installations.
SilentSpartan, I used SuperSU last year to root and unlock my tablet when it was still a 4.0 android to flash to 4.1. This recent update was from 2.5 TWRP on a rooted device running 4.2. When I installed 4.2, it blew away my TWRP, and I had to flash the new TWRP 2.7.0.1.
That flash from OEM fastboot to TWRP 2.7.0.1 is what I needed help with.
Click to expand...
Click to collapse
Damn, so I'm screwed. Why does Asus have to such so much...? You can no longer unlock afaik.
SilentSpartan said:
I am trying to do exactly what TallMilk is doing...put Cyanogenmod on my tablet. It is my understanding that I have to unlock my bootloader though? Which I have tried doing a million different ways with the Asus Unlock tool which always gives me an error.
If I follow the instructions posted above I will be able to flash Cyanogenmod without unlocking my bootloader?
Click to expand...
Click to collapse
You're going to have to unlock no matter what. Did you try both v7 and v8 of the unlocker and calling Asus Support to tell them to put your serial number back into the database (get a manager)?
cmendonc2 said:
You're going to have to unlock no matter what. Did you try both v7 and v8 of the unlocker and calling Asus Support to tell them to put your serial number back into the database (get a manager)?
Click to expand...
Click to collapse
I've tried every firmware and unlock tool combination. Nothing works. I sent them an email a day ago. Depending on there response, maybe I'll try calling. I'm so fed up with this tablet, I'm about to throw it out my window. $400 POS. :good:
SilentSpartan said:
I've tried every firmware and unlock tool combination. Nothing works. I sent them an email a day ago. Depending on there response, maybe I'll try calling. I'm so fed up with this tablet, I'm about to throw it out my window. $400 POS. :good:
Click to expand...
Click to collapse
Did you ever get your tablet fixed? I am having some problems myself after a miserable m9 update.
I tried to flash a custom rom (KatKiss), and it seems that I did something wrong along the way because the tablet is stuck in a bootloop.
So I rebooted my tablet and access the bootloader ("fastboot devices" recognize my device) and try to go to the recovery (with the TWRP splash screen, "adb devices" recognize my device). Unfortunately after 20 seconds on the splash screen, the tablet reboots (tries to load my katkiss android but bootloop everytime).
Bootloader : 10.6.1.14.10
TWRP : 3.1.1.0
Since the fastboot recognize my device while in bootloader, I think that I should try to flash twrp since it seems to be corrupted somehow.
Every time I flashed a rom nothing went wrong but now that I have a problem I don't want to worsen it and would like some help on the issue.
Did you flash the rom in your current TWRP?
Something is off... Did you possibly flash the TF201 rom version??
Whatever you do - do not use Wipe Data from the bootloader!!
Reflash TWRP, format data, then reflash the rom
And report in more detail what you did
Sent from my Nexus 5X using Tapatalk
Thank you for the fast reply!
I did flash the rom with my current TWRP and only downloaded the rom version for the TF700. Below is what I tried from your suggestion:
I check that my device is recognized:
fastboot device
So I tried flashing TWRP:
fastboot flash recovery twrp-3.1.1-0-tf700t
After it succeeded, I reboot the tablet:
fastboot reboot
And as a result... nothing changes, I don't know if I should try with older version of TWRP. Seems like I only have access to the tablet with the fastboot.
That is very strange indeed. Yes, try a 3.0.2 version of TWRP and see if that works.
If not, I would flash the Asus stock blob in fastboot and start from scratch....
Sent from my TF700T using Tapatalk
Kromlech said:
And as a result... nothing changes, I don't know if I should try with older version of TWRP. Seems like I only have access to the tablet with the fastboot.
Click to expand...
Click to collapse
Not sure if this will help but I had a reboot problem with trying to load into TWRP. I posted my solution into a different thread but will toss it out here..
I just had this problem with a Transformer 201Prime. The cycle went something like this..
Power on.... get ASUS logo in middle, Tegra3 logo on lower right, and bootloader unlocked in upper left....
then a buzz... then reboot.....
So I would try the power button and hold the volume down... that got me into the bootloader but when I hit the volume up button it would give me the TWRP logo... then buzz and reboot...
After much monkeying around... I realized I would have to re install everything. Fortunately I had the original NVFLASH bloob files backed up so I was able to get into the NVFLASH commands.
Here is a great tutorial, it is for the 201 so be sure to download the correct files but the steps are basically the same.
https://forum.xda-developers.com/tra...prime-t3486237
The other problems is I had to download a bloob tool to 'unpack' the necessary .bin and .ebt files that are mentioned in the commands... I used the following link to download the tool.
https://github.com/AndroidRoot/BlobTools
I hope this helps shake loose a few answers.
Once I was able to get a working recovery I could flash an updated ROM. (KatKiss is my current favorite)
I tried to flash version 3.0.2 of TWRP and the problem is still the same.
@Unidave199 the link you put in your post points to a post that doesn't seems to exist anymore, has it been moved?
@berndblb how do I do for flashing a rom with the fastboot? any stock rom to recommend?
double post
Kromlech said:
I tried to flash version 3.0.2 of TWRP and the problem is still the same.
@Unidave199 the link you put in your post points to a post that doesn't seems to exist anymore, has it been moved?
@berndblb how do I do for flashing a rom with the fastboot? any stock rom to recommend?
Click to expand...
Click to collapse
Unidave's link would only help you if you generated your device specific nvflash blobs when the tablet was still functioning. Did you:
flash a specifically modded recovery - flash the moddded bootloader, use wheelie to generate and save your blobs, return everything to factory specs?
I highly doubt it since you would have mentioned...
To flash the stock blob in fastboot you download the Asus firmware from here: https://www.asus.com/my/support/Download/28/1/0/11/29/8/
Extract the zip twice until you see a blob and a meta-inf file.
Move the blob into your fastboot folder, discard the rest of the file
Issue these commands one by one, letting each one finish before starting the next. Some will finish quick, others may take up to 3 minutes:
Code:
fastboot erase system
fastboot erase boot
fastboot erase recovery
fastboot erase misc
fastboot erase cache
fastboot erase userdata
fastboot flash system blob
fastboot reboot
The first boot will take a while, but that should put you back on a stock JB 4.2 system.
Trash all the files you used in your last attempt and redownload the rom, gapps and supersu
Fastboot flash TWRP
Reboot
Format /data in TWRP (this will take up to 1 hour - let it finish!!), then convert /data to f2fs
Flash the rom, gapps, supersu
If you flash Nougatella remember that you have to turn on wifi right after the language selection during setup or Google framework will crash.
Spend the end of the day doing it, but it worked flawlessly! Thanks a lot @berndblb, now I can use my tablet again!
Kromlech said:
I tried to flash version 3.0.2 of TWRP and the problem is still the same.
@Unidave199 the link you put in your post points to a post that doesn't seems to exist anymore, has it been moved?
@berndblb how do I do for flashing a rom with the fastboot? any stock rom to recommend?
Click to expand...
Click to collapse
My apologies for the problem with my link, looks like you resolved it, but wanted to post a correct working link to take someone else into the full conversation and context...
https://forum.xda-developers.com/showpost.php?p=71150385
berndblb said:
To flash the stock blob in fastboot you download the Asus firmware from here: https://www.asus.com/support/Download/28/1/0/11/fq2B3oq64av1O95/8/
Click to expand...
Click to collapse
Broken link ? that post isn't very old, either. ??
berndblb said:
Did you flash the rom in your current TWRP?
Something is off... Did you possibly flash the TF201 rom version??
Whatever you do - do not use Wipe Data from the bootloader!!
Reflash TWRP, format data, then reflash the rom
And report in more detail what you did
Click to expand...
Click to collapse
I did wipe data from bootloader, now I can't go to bootloader. How to revive my tf700t?
Please help
Thanks
ketulharini said:
I did wipe data from bootloader, now I can't go to bootloader. How to revive my tf700t?
Please help
Thanks
Click to expand...
Click to collapse
You'll need to refer to post #8. However, the link to the tf700 stock blob is broken. You'll have to search Google for one. They're out there, but it does require digging .Make sure the one you get is for the proper SKU of your tablet (US, Worldwide, JP, etc.). I completed the process myself maybe a month ago. Good luck!
monogwai said:
You'll need to refer to post #8. However, the link to the tf700 stock blob is broken. You'll have to search Google for one. They're out there, but it does require digging .Make sure the one you get is for the proper SKU of your tablet (US, Worldwide, JP, etc.). I completed the process myself maybe a month ago. Good luck!
Click to expand...
Click to collapse
I got the stock blob ww version.
Just tab doesn't stay on fastboot mode keeps rebooting.
Don't know how to do it.
Is it possible to get stable fastboot screen some how? Or just flash the bootloader to get fastboot working.
May be this noob question but I don't know how to do.
Thanks
ketulharini said:
I got the stock blob ww version.
Just tab doesn't stay on fastboot mode keeps rebooting.
Don't know how to do it.
Is it possible to get stable fastboot screen some how? Or just flash the bootloader to get fastboot working.
May be this noob question but I don't know how to do.
Thanks
Click to expand...
Click to collapse
There is one more piece to the puzzle- hold short while I dig it up.
Here it is: http://www.transformerforums.com/forum/transformer-pad-infinity-tf700-tegra-3-development/46302-guide-help-my-transformer-tf700-boots-only-recovery.html
Do be *very* careful. Read thrice, do it once. Especially if you're feeling noob-y.
monogwai said:
There is one more piece to the puzzle- hold short while I dig it up.
Here it is: http://www.transformerforums.com/fo...my-transformer-tf700-boots-only-recovery.html
Do be *very* careful. Read thrice, do it once. Especially if you're feeling noob-y.
Click to expand...
Click to collapse
Thanks for this information.
One more question,
My tab is keep bootlooping neither it stays on twrp nor bootloader.
It has blue screen of recovery that is twrp after 5 to 10 seconds it boots again.
Is this enough time to execute the commands while it is on blue screen?
Thanks
ketulharini said:
Thanks for this information.
One more question,
My tab is keep bootlooping neither it stays on twrp nor bootloader.
It has blue screen of recovery that is twrp after 5 to 10 seconds it boots again.
Is this enough time to execute the commands while it is on blue screen?
Thanks
Click to expand...
Click to collapse
Well, that depends on several things. What I did was write a short little DOS batch file to process all the fastboot commands. So, with your batch file ready, open your command prompt (change directory to your adb/fastboot directory if it's not set in system's 'path=' environment variable) and have the batch command typed in, ready to hit enter. Tether to pc via USB, proceed to boot to adb. The second you hear windows make the USB notification sound, slap that enter key. It should just process and reset the tab and get you out of TWRP bootloop. Which is just step one.
If you aren't familiar with writing bat files for DOS, let me know.
monogwai said:
Well, that depends on several things. What I did was write a short little DOS batch file to process all the fastboot commands. So, with your batch file ready, open your command prompt (change directory to your adb/fastboot directory if it's not set in system's 'path=' environment variable) and have the batch command typed in, ready to hit enter. Tether to pc via USB, proceed to boot to adb. The second you hear windows make the USB notification sound, slap that enter key. It should just process and reset the tab and get you out of TWRP bootloop. Which is just step one.
If you aren't familiar with writing bat files for DOS, let me know.
Click to expand...
Click to collapse
You mean a batch file with the adb commands right? Once he can boot into fastboot he has all the time in the world to run the commands for the buster99 (description in post #8). Depending on what situation he came from before, it might be a good idea to start all fresh...
The tricky thing are the adb push bootit.ko and the insmod command. Those have to be timed just right to get executed, so a batch file might come in handy. Both commands only take a second or two to execute, so your window of 5 seconds could work. Maybe not in the same session, but they should work.
If the insmod command does not kick the tablet into the bootloader, there are 2 possible reasoons:
adb push bootit.ko did not work
the insmod command did not work
To find out if the file push worked you could add a simple list command for the contents of /sdcard/. Again - tricky, I know since you still are working with the 5 sec window, but that's what you got to work with...
That would look something like in the attached picture. So after pushing bootit.ko you issue:
Code:
adb shell ls /sdcard/
Try it with the batch file, try it with single commands... Don't give up. As long as you have any kind of adb access you should be able to solve it.
Good luck!
berndblb said:
You mean a batch file with the adb commands right?
Click to expand...
Click to collapse
Yeah.
berndblb said:
Once he can boot into fastboot he has all the time in the world to run the commands for the buster99 (description in post #8).
Click to expand...
Click to collapse
Again, mistake in my terminology. What I meant to say is, batch commands for the process involving the Bootit.ko- the adb portion.
Thanks for clearing that up.
@ketulharini
Anyhow, I was unable to get the process to take without having automated *every last step* of the process. Literally open the cmd window, have the command for your batch file typed in ready to go, and plug in. Hear the noise from windows and slap enter asap. That's the only way I could get it in time, and I'm a ridiculously fast typist.
monogwai said:
Yeah.
Again, mistake in my terminology. What I meant to say is, batch commands for the process involving the Bootit.ko- the adb portion.
Thanks for clearing that up.
@ketulharini
Anyhow, I was unable to get the process to take without having automated *every last step* of the process. Literally open the cmd window, have the command for your batch file typed in ready to go, and plug in. Hear the noise from windows and slap enter asap. That's the only way I could get it in time, and I'm a ridiculously fast typist.
Click to expand...
Click to collapse
Care to share the batch file?