Hey guys ,
This is my first thread !
I found my dad's old HTC Touch Viva and thought about flashing something new.....(it runs win 6.1 !!)
So the HardSPL thread said the device must be connected in windows mobile device centre , but it just doesnt detect the phone .
So this means I cant unlock it.
Even though I ran it without syncing it , opal hard spl says that it cannot open the update utility [error:208 file open]
Can anyone help me ?
Related
help... i downloaded smart1's (normal, not clean) update, and launched UPGRADE_ROM.DAT from PC... it said initializing and everything... and then it reached to "copying something.dll' ... i waited 10 minutes or so then i got something like:
"error cant copy ....... because connection closed from remote... something like that."
i did NOT touch the imate during the process
and now when i turn on my imate i get the HTC with white background for a second but then it freezes on the blue "i-mate" screen... displaying:
IPL 2.13.0001
SPL 2.13.0001
GSM 02.20.21
OS 10.1.0.811
when i connect it to pc, windows does recognise and install my device but ActiveSync doesnt connect.
i tried removing the battery then putting it back in then pressing and holding the conn. button along with the power button and i DO get to the bootloader screen (with three colors) and then when i plug in the usb i get a small 'usb' word at the bottom of the screen, but still, ActiveSync doesnt connect... i tried installing the update again... but the program doesnt find my device
how can i make it work again ??? plz help me
thx in advance
Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD
johnnyduk said:
Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD
Click to expand...
Click to collapse
i read in another topic what u said above... thx for ur reply...
btw, i'm currently downloading a 56 mb file called:
JAMin_WWE_2130923_21309112_020720_ship.zip
it can be downloaded from:
ftp://ftp.clubimate.com/JAMin_WWE_2130923_21309112_020720_ship.zip
or (better direct link)
http://www.clubimate.com/support/JAMMIN/ROM/JAMin_WWE_2130923_21309112_020720_ship.zip
i suppose this is the file i shoudl install right now using bootleader mode ? right ?
my previous rom version was 2.13.9.23 (same as name of file)
so is this the file i shud be downloading right now ?
thx a lot in advance
Just BEWARE that the rom you download is for your phone, it will be for a G3 or a G4, if you get it wrong, your phone is DEAD.
Please read the wiki and stickies....................................
JD
please. my phone doesnt move. it stuck on login screen.:
any way to restore it? i tried to hard reset, soft reset...nothing..
i tried to install smart 1 and after this happened
Problem solved
Same problem for me, but I solved today:
I connected the phone to pc in bootloader mode, the pc see the phone and says ppc usb sync, but the activesync not started.
I tried to install a qtek official rom by dangaard (you can find it here: http://www.megaupload.com/it/?d=4ELWL078 ) and I solded the problem !
Thanks god!!!!
Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.
Twinsis said:
Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.
Click to expand...
Click to collapse
ftp://ftp.clubimate.com/JAMin_WWE_213923_2139123_022021_ship.zip
here is the official link for O2 xda or Imate Jamin
Same problem!
I had same problem but in my case with downgrade from WM6 to ASERG rom, i have downloaded RUU_Prophet_220734_2207114_024721_NVID.exe and that fixed my problem.
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
THere are many posts like this.
Did u do your reading before flashing? Are you using Vista, if so get on a computor running XP, u cannot flash with vista.
Did you unplugg all ur usb devices and any other connection software? Try also other usb ports. I had to try 3 of my 4 before flashing worked for me.
Please read the wiki and search the forums tho, there are many good guides out there like this one attached (apols for zip file, i had saved the web page for use ages ago)
You also dont say what ur IPL/SPL numbers are so its difficult to help, you should list the steps when posting if you need help
Get back if you need more help...
ginbuko said:
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
Click to expand...
Click to collapse
Hi, I had similar problem even after repeated tries. What I did to get around it was:
1) Run the HardSPL (from Prophet tools or from RUU).
2) Check "I understand the caution..." and click next to get to 2nd screen (see attachment) on RUU where it gives you the 4 things to check before proceeding (here your Prophet must be entering the white screen).
3) Leave the RUU on the 2nd screen on the computer and disconnect Prophet after white screen gets stuck and activesync disconnects).
4) Reboot Prophet.
5) Reconnect Prophet and wait for activesync connection to be established.
6) Now on the computer check "I completed the steps indicated above" and click on next.
Hopefully this should go ahead and HardSPPL your Prophet.
Do let us know if this worked.
possible solution for ya
Code:
ginbuko said:
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
Click to expand...
Click to collapse
Hey,same problem here...but you probably got rid of the prophet already...well hope it helps someone else
thank God i had surfed to other sites and found this HARD SPL utility.
Its in "wm6 Update_Package" ...might as well be from here..
(dont know who made it-i`ve been downloading so much stuff lately from the web no offence )
maan...how do I add an attacment here?
ahah-here it is..
hey...what`s up with this...cant upload...its under 8mb,why is it bugging me with "upload of file failed"?
ok...this means war..
anyway here is the link http://rapidshare.com/files/233302800/HardSPL_G3_and_G4.rar.zip.html
ginbuko said:
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
Click to expand...
Click to collapse
pinoy ka gin???
text mko kung malapit ka lang sa manila.. help kita...
09085524216
Hi
where i can download hardspl for g4?
Hey I have a HTC Fuze on 6.1.. I'm trying to put 6.5 or something other than 6.1 but whenever I try to run it on my pc, its telling me that the application cant run.. how do I fix this because i'm dying to put on another ROM thnc=x
hey dudes,
I finally managed to put a wm 6.5 rom with manila2D on my Qtek 9100.
Now a friend of mine also wants that stuff on his smartphone.
He has a HTC Polaris (Touch Cruise) which is running wm 6.1 dutch.
I told him it would be in english, but that;s no problem.
I managed to find a rom, but no matter what I do...I can't get in on his phone.
Could someone get me a step by step guide on howto do it?
I am gonna use this rom:
http://forum.xda-developers.com/showthread.php?t=554071
anyone wanna help
my problem is I can't get the HARD-SPL thing on the device.
I all the guides it says it will tell you to unplug en replug the usb cable...bit mine doesn't.
It boots the bootloader, and after that a progressbar shows up and gets stuck @ 0% for a while and then error.
19rsn007 said:
my problem is I can't get the HARD-SPL thing on the device.
I all the guides it says it will tell you to unplug en replug the usb cable...bit mine doesn't.
It boots the bootloader, and after that a progressbar shows up and gets stuck @ 0% for a while and then error.
Click to expand...
Click to collapse
whether you try to use Hard SPL V2 .. ?
for the perfect flash HardSPL , you must remove the sim & sdcards then run SDA ApplicationUnlock installed on your PC only then you can run the ROM Update Utility.exe to flash the hard SPL
hey!!
The SDA Unlocker did it's job...didn't even know I needed this!
HardSDL V2 Worked GREAT!!
My co-worker is really gonna like this.
After downloading the HardSDL in the attachment it was installed in a few seconds.
After that, installing the rom was piece of cake...WORKED LIKE A CHARM!
hello, i am new to x developers ...
i have been trying to hspl and rspl my htc 7 trophy to get android on it, and during that process sth went wrong (i am not that expert in this issue) sth went wrong and the process didn't complete, well the phone is still running and i can update it and use it in windows mobile 7 mango, but the problem is that in the boot-loader screen ( the tri-colored screen )i cant see any serial or usb written at the bottom, that means i cant install any new rom , can any one help me in fixing this issue, i have posted 2 images showing the the problem and the info about my phone .
plzzz helppp...