Database Info

64k simcard problems! WAS: Danish ROM for S710?

I've been flashing around with english roms to see if it changed the bloody problem with the phone going into a reboot loop if a SD card is inserted.
This didn't fix it, and now there's apparantly no danish rom available from Telia, and since this isn't a Dangaard branded phone I dont have access to the ROMS on www.qtek.dk :-(
If anyone has a nordic rom of sorts, please save me from binning the phone
Edited the title to make more sense now

If ur phone only reboots with sd card inserted it means something on the sd card is causing it. Format your sd card on a PC and try again.

That's obviously the first thing that came to my mind aswell. I've tried formatting it, I've tried using a different card, etc. No use. Ends up in the reboot loop with a card inserted, boots fine without it. I can then insert the card after the device has booted without problems, but next time WM6 hangs or whatever, same problem.

Have u tried resetting the device by pressing left and right softkey simultaneously and then power on? Alternatively try the clear memory program in the experts folder.

Tried hardresseting it and using the clear memory program yes

Well then it can only be a hw defect. Get it serviced.

I've read others have this problem aswell on some of their phones. I can't really turn it in for service with a non-nordic rom anyway, so if noone has a nordic ROM they can share I'll prolly end up whacking it with a hammer...

Is your device CID unlocked and can you flash any ROM?
Have you tried flashing the Dopod 1.19 ROM?
What exact ROM version was on it (version#)? Did you then down- or upgrade it and to which version? Did you make a backup of the ROM using pdocread as described in the wiki?
I would leave the hammer in ur toolbox for now. I'm pretty sure the thing can be rescued if it is indeed caused by a bad flash.

The problem wasn't caused by a bad flash, I bought it secondhand only about 2 months old, and it's had it straight out of the box. Obviously the seller didn't know anything about it having this quirk...
I tried flashing it with the 1.19 dopod ROM (Had 1.14 nordic ROM initially), still same problem. I did a backup with pdocread, but can't make pdocwrite work, complains it can't write to the filesystem.

Since your device is obviously CID unlocked, it looks feasible to create a flashable file from your pdocread backup. Take a look at my bootloader thread, there is a link to another thread where that is covered.
I personally believe the previous owner CID unlocked your device and maybe it didn't completely work in the way it should. Please make a backup using "bkondisk" and post the IPL (128kB) and the SPL (512kB). I can check these files, perhaps the hw is not properly set up by any of these.

Isn't the IPL and SPL replaced in the standard RUU flashes?

Normally yes, but in ur case maybe it is skipped.
Why don't u dump it so we can check it.
Radio is also interesting.

Have DK ROM - will give
Drop me a mail. Then we an figure out how to get it to you.
This is the file.
ruu_vox_htc_noric_1.15.402.4_4.1.13.37_02.83.90_ship.exe

would be nice if you upload it to XDA developers FTP site

mHumle said:
Drop me a mail. Then we an figure out how to get it to you.
This is the file.
ruu_vox_htc_noric_1.15.402.4_4.1.13.37_02.83.90_ship.exe
Click to expand...
Click to collapse
Great! I've sent you a PM, can't get your email from this board

I've now flashed it back to the danish rom, and done some further testing.
I've found out that the phone boots fine with either the simcard OR the SD card inserted, but not both at the same time.
I've also found out that this problem seems to be a problem with 64k simcards, and not 32k simcards.
With a 32k simcard everything is just peachy.
Anyone got suggestions?

Edited the title to make more sense now

Seems that both 64k sim and sd cards draw too much current.
Looks like a HTC design flaw.
Did u try other sd cards?

Tried another 1gb card, they're both Kingston though. Both work fine in my P4350 / Herald.

Try with another brand and smaller sd card.
And now that you have your nordic rom back on, I'd also request service from HTC.

Problems upgrading Radio 1.58.26.20!!!!

I upgrade my Rom from DualTouch V4 to Duttys Official WM6.1 Rom, and i have no sound, I read that i need to upgrade my radio son i tried to install the 1.58.26.20 cause right now im using the 1.27.12.11, but the moment that im flashing, when appears the porcentage bar, frezze in 0% and nothing happens. is there an thread that i can read to fix that or what can i do???
I try to find a thread with the solution but i didnt find it.
Thanks
Sorry about my english, im newbi.

hmmm, I remember having an issue like that when I flashed my radio. How long do you let it sit before giving up? Also maybe try another radio???

thanks for that quick answer!!!
I tried two differents Radios, and i had the same problem with both of them.

I still got problems upgrading my Radio, it appears Error 262
Can somebody help me please.
the porcentage bar frezze in 0%.
what can i do?

jmcorral said:
I still got problems upgrading my Radio, it appears Error 262
Can somebody help me please.
the porcentage bar frezze in 0%.
what can i do?
Click to expand...
Click to collapse
Try flashing the radio from the storage card.
Read this post...
http://forum.xda-developers.com/showpost.php?p=1577818&postcount=1
This talks about the flashing a ROM from the MicroSD but you can also flash the radio. Just change the .nbh in the radio file to the same name as the instructions say.

AllTheWay said:
Try flashing the radio from the storage card.
Read this post...
http://forum.xda-developers.com/showpost.php?p=1577818&postcount=1
This talks about the flashing a ROM from the MicroSD but you can also flash the radio. Just change the .nbh in the radio file to the same name as the instructions say.
Click to expand...
Click to collapse
i see this offered as a possible solution more and more.. whats the advantages of flashing from the storage card exactly?

duswdav said:
i see this offered as a possible solution more and more.. whats the advantages of flashing from the storage card exactly?
Click to expand...
Click to collapse
Typically when a user has a connection error and can't upgrade ROM/RADIO via the computer you can always flash using the MicroSD card.
Another advantage is if you want to quickly change ROM's and Radio's you can do so on the fly.
Also upgrading this way takes out the possibility if you are on a desktop computer of losing power or having your phone disconnected while flashing. I lost power when I was flashing my phone once I thought I bricked my Kaiser

yes,flashing usiing sd card method is faster then flashing with activesync
and you dont have to affraid about lost connection or power corrupt
so,happy flashing
cheers

IT WORKS!!!!!
Thanks to all!!!!!

radio flashing

i know this has probably been asked before but i'll get to the point. I'm wondering how to flash a different radio from the sd card if it's possible.I'm familiar with flashing through usb and quite familiar with those instructions but not when you through an sd card in the mix. any suggestions? Reason why I want to do this is because when i use the pull out the keyboard and try using certain symbols such as "@" i get "!" so i think i pinned the problem down to being a radio issue and not rom since this rom is 1 of dutty's and they're known to be nearly perfect.

1. flashing flashing a radio is the same as flashing an OS rom,you would have understood this if you read the sd card flashing thread.
2. are you even sure its the radio? did you try the tilt keyboard fix

so it's not possible to flash radio other than usb method, i'll try to use the keyboard fix and see if that saves me time

i didnt even say it was not possible. all i said was flashing by sd card is the same whether you used a radio rom or an os rom or watever rom.

worked great,thanks for the help.i dont normally need much help cause i'm a pretty goood searcher as you can see i dont post much about asking for assistance for myself.can close this thread now

dyetheskin said:
so it's not possible to flash radio other than usb method, i'll try to use the keyboard fix and see if that saves me time
Click to expand...
Click to collapse
A. Thats not what he said. He said Flashing a Radio is just like Flashing a ROM.
2. Psst, Check out my Signature.
D. The Keyboard fix will set you Free.

keyboard issue is fixed. i know nothing about flashing rom or radio from sd card.hope it doesnt involve formatting it cause i have too much installed and saved on it but have room for the radio if its possible to flash the radio from the card

[Q]Fuze undetected on any PC, just charges

I am in deep trouble here and could really use some help please. My ATT Fuze is not being detected by any PC and i have tried everything from different wires to changing everything on the fuze it self. Now my only option is to exchange it but i don't have the original OS because i am using NRGs Rom and hard SPL it about 4 months ago. Now to my question, is there anyway i can revert it to stock ROM and SPL with micro sdhc card? I need some steps please because i cant find a way to do it. Would i have to change the OS and the SPL to return if there is anyway please let me know.

darkreborn said:
I am in deep trouble here and could really use some help please. My ATT Fuze is not being detected by any PC and i have tried everything from different wires to changing everything on the fuze it self. Now my only option is to exchange it but i don't have the original OS because i am using NRGs Rom and hard SPL it about 4 months ago. Now to my question, is there anyway i can revert it to stock ROM and SPL with micro sdhc card? I need some steps please because i cant find a way to do it. Would i have to change the OS and the SPL to return if there is anyway please let me know.
Click to expand...
Click to collapse
First, what OS are you running on your PC.
Second, have you disabled/Enabled "enable faster data" in Settings/Connections/USB to PC?
Third, Have you deleted the partnership and tried to reestablish it?
Doesn't seem to be a warranty issue.

Fuze Reply
First of all thanks for your reply.
I have tried it on 4 different computer but unfortunately same result on vista and XP, on my phone i am using NRG july version rom.
I have disabled and enabled faster data in but doesn't seem to matter.
I tried everything, i reinstalled windows mobile device but doesn't seem to matter. When i ended the partnership it wasnt being detected after it or before it.
Cant i exchange it because its a faulty phone? Also can u please tell me if i can revert it to att stock rom and spl with a micro sdcard because i am going to buy a card reader. I really don't want to toss this phone and waste all that money please help!

darkreborn said:
First of all thanks for your reply.
I have tried it on 4 different computer but unfortunately same result on vista and XP, on my phone i am using NRG july version rom.
I have disabled and enabled faster data in but doesn't seem to matter.
I tried everything, i reinstalled windows mobile device but doesn't seem to matter. When i ended the partnership it wasnt being detected after it or before it.
Cant i exchange it because its a faulty phone? Also can u please tell me if i can revert it to att stock rom and spl with a micro sdcard because i am going to buy a card reader. I really don't want to toss this phone and waste all that money please help!
Click to expand...
Click to collapse
Yes, you can revert via SD card.
Do Radio and ROM first, then do stock SPL last.
Rename each RAPHIMG.NBH (one at a time) on a FAT32 formated card 2gb or smaller.
Go into bootloader mode and it should flash from there.
I would test your USB connection after you flash back to stock ROM before you flash the stock SPL to see if it may have fixed your issue.

Huh
Thanks a lot man!
Now the hard part , why do u say a card 2gb or smaller?
So i can revort the SPL with a micro sdhc card also? can u tell me where i can find this stuff, i am really sorry for the trouble and would really appreciate it if you can tell me step by step because i am a noob
Hopefully ATT exchange it for the usb issues , gotta check with them after this. Thanks

darkreborn said:
Thanks a lot man!
Now the hard part , why do u say a card 2gb or smaller?
So i can revort the SPL with a micro sdhc card also? can u tell me where i can find this stuff, i am really sorry for the trouble and would really appreciate it if you can tell me step by step because i am a noob
Hopefully ATT exchange it for the usb issues , gotta check with them after this. Thanks
Click to expand...
Click to collapse
I've heard that anything over 2 gb will cause an issue but I have done it from an 8gb card.
Start here for issues encountered.
Basically once you find your ROM Radio and SPL, extract the files so you can see the .NBH files for each.
1. Take the ROM file and rename it "RAPHIMG.nbh " without quotes.
2. Place it in the root of your storage card and enter bootloader mode (Volume Down + Reset), the phone will read the image file and begin to load it.
Do this for each file but wait until the first file has loaded.
Radio.nbh will be renamed to RAPHIMG.nbh
SPL.nbh will be renamed RAPHIMG.nbh
As one is done loading, remove it from starage card and put the next one on and repeat step 2.
Another thread regarding SPL.
I hope this helps you and sorry I don't have the time to walk you through it.
Just read first then you'll know what to expect.

Bruce Inman said:
I've heard that anything over 2 gb will cause an issue but I have done it from an 8gb card.
Click to expand...
Click to collapse
my best guess is just in case the bootloader doesn't have drivers for SDHC cards... my x51v has drivers for SDHC in WM, but flashing requires SD cards because the bootloader doesn't read SDHC

revert SPL or no?
Hey thanks bruce!
One more question, should i revert the SPL even tho i changed the radio and os. When i go to ROM version it says 1.95 but is that the SPL? Also you think ATT will take the phone back with the phone not syncing reason or do i have to make up some other stuff up? O btw the 8gb kingston card worked fine for reverting it and it still doesnt detect the phone

darkreborn said:
Hey thanks bruce!
One more question, should i revert the SPL even tho i changed the radio and os. When i go to ROM version it says 1.95 but is that the SPL? Also you think ATT will take the phone back with the phone not syncing reason or do i have to make up some other stuff up? O btw the 8gb kingston card worked fine for reverting it and it still doesnt detect the phone
Click to expand...
Click to collapse
To be safe I would revert the SPL as well.
The 1.95 is the ROM build base.
You want to revert back to stock SPL 1.90.
I can't second guess what AT&T will cover or not but you may want to "further your cause"....
Best of luck!!!

in my experience (my UK t-mob vario is back at repair right now) - DONT revert the SPL if you cant do it from the USB.
Obvisously you have a different setup to me, but when i tried to revert my phone to stock for exactly the same fault (no usb sync, regardless of pc or cable / phone rom, state etc etc) i managed to get the phone to refuse to boot due to a spl / rom difference. As i couldnt load from usb - i couldnt flash anything new, and as i had managed to overwrite hard spl - i couldnt flash what i wanted from the SD card! (if i could get the usb to work, i could fix it all - but as that was the problem i had to send it off fubar)
For some reason (god knows why!) it appears that t-mob are repairing my phone under warrenty despite the spl error but i wouldnt advise getting yourself in the same situation, as i was 100% expecting it to come straight back to me!
My personal advice is send it off with the correct rom, radio & splash screens (and remove security unlock if required) so the phone looks stock - the only difference will be the spl version. They probably wont notice!

1.90 or 1.95
Thx for the info guys, my new phone is coming and it took me about 2 to finally on its way. About the SPL, mine says 1.90 and that was when i first did the hard spl to change roms. What is the stock SPL 1.90 or 1.95? at loading it hows me 1.90 olinex i think...also i can change it if needed with my 8gb sdhc card or no?

I had a problem with my PC not detecting my fuze a few weeks ago. I found out it was my new firewall blocking the connection. I disabled the firewall and it worked like normal.

If it were me i would try to connect again after you flash the stock rom. If there was something wrong with the usb it still wont work. If it connects to activesync the maybe it was your ROM, or something else.
Just a suggestion

Need help

Hey guys i just unlocked my phone and put mighty rom 4 in it and it eats up all my memory. i need help finding a better rom for my Verizon Touch Pro Non Sim card. and im a noob at this just got the phone today..

Read this sticky on Flashing a CDMA device
Spend some time in the wiki
And whatever rom u choose is a personal preference. Check out NRGZ28's roms, they seem to be the most popular. Be sure to only flash a CDMA rom!

ok my phone is unlocked dio i need to flash it again eventho i have might rom on to put a new rom on or can i just put new rom on it with might rom on it

cyber440 said:
ok my phone is unlocked dio i need to flash it again eventho i have might rom on to put a new rom on or can i just put new rom on it with might rom on it
Click to expand...
Click to collapse
You would not have been able to flash a cooked ROM unless the phone was unlocked.
Are you saying yuou flashed then unlocked?
Doesn't make any sense.
I understand you're a noob, do I strongly suggest you read BEFORE you flash, then you won't have questions such as these.
If you flashed a ROM that "ate up all your memory" then you did something wrong.
I would suggest flashing back to a stock ROM and go to the CDMA flashing guide for noobs.
You can flash directly to a new ROM if you are unlocked.

Bruce Inman said:
You would not have been able to flash a cooked ROM unless the phone was unlocked.
Are you saying yuou flashed then unlocked?
Doesn't make any sense.
I understand you're a noob, do I strongly suggest you read BEFORE you flash, then you won't have questions such as these.
If you flashed a ROM that "ate up all your memory" then you did something wrong.
I would suggest flashing back to a stock ROM and go to the CDMA flashing guide for noobs.
You can flash directly to a new ROM if you are unlocked.
Click to expand...
Click to collapse
No i didnt flash then unlock. I wana know if i can put new firmware on my phone with the mighty rom on it... Like get rid of the mighty rom and put somthing else on it with out going in the flash guide and unlocking my phone again and stuff like that... Also can i put WM6.5 Rom on my phone even tho it has 6.1 on it. and whats the difference between CDMA And the other thing

I have Verizons "Version" of the touch. oh and i forgot when i say it using all my memory mean like after and hour of use it will be at 82% mem usage with all the programs closed

If you are unlocked, you can flash a cooked ROM over the one that you have now, even if its WM6.5.
CDMA means you have no SIM card where GSM has a SIM card, so you need to read specifically for flashing a CDMA ROM to your phone, or you will brick it.
Also, I thnk the 82% is your battery level. Where do you see the 82%

on the top right corner i press it and has the lil mem icon and it says 78% next 2 it. whats a good backup program for my contacts and data

cyber440 said:
on the top right corner i press it and has the lil mem icon and it says 78% next 2 it. whats a good backup program for my contacts and data
Click to expand...
Click to collapse
Ok, that is the task manager program usage.
78% seems high with nothing running but you can open task manager and it will tell you which programs are using iup your resources.
If you try to restore PIM backup to Manila it will hose up Manila, so I use Microsoft's MyPhone program to sync my contacts, texts, even music and pics to a server.

Alright man cool. Thanks for your help