Hi ,
I have Galaxy Nexus (had ) and its screen is broken.
Device is locked by pin , it powers up but I can't see anything on the screen and touch is not working.
when I am connecting the device to my PC I can't access my data(pictures and videos mainly) since the device is locked.
fixing the screen is too expensive for me and i already bought a replacement phone.
Any Idea how I can get the data?
Thanks
Your device is not listed in the explorer? The gnex has Mtp support and it should be there, if it Is not changed.
USB debugging activated? Then use the adb to pull them.
Odp: [Q] Get data from broken screen Galaxy Nexus device
If you mean that lcd is broken, by touch is working, and you have usb debbuging enabled, search for a screencast.
You will see your phoines screen on a pc, and then try to unlock it.
Here is the link
http://code.google.com/p/androidscreencast/
Send from my Asus Nexus 7.
POOOLSKAAAA BIALOOOO CZEEERWONIIIII!!!!!
Related
Hi there, My nexus 5 is having screen issues and the screen basically doesn't function due to what I can only assume is a bad connection on the mainboard ( if I press in the right area with the back cover off the screen will flicker and work a tiny bit if I reboot the phone.) My issue is I still have tons of pictures that are very dear to me on the device and need to get them off of it. When I connect it to my pc (windows 7) it connects and shows up as a nexus 5 device but nothing will appear in the folder. Im fairly certain I have the correct drivers installed as well. So how can I get it to connect properly with having basically no access to the screen? Ill even paypal you $5 if your answer works for me, thanks
Did you enable USB debugging? Did you enable MTP when connected to a computer? Is the computer a trusted device?
audit13 said:
Did you enable USB debugging? Did you enable MTP when connected to a computer? Is the computer a trusted device?
Click to expand...
Click to collapse
must have at some point because i connected it to a computer in the past, no idea and i dont know how to, and i dont know.
If the the phone is running a stock ROM and has a lock screen PIN, pattern, or password, you probably need to unlock the phone and select MTP as the USB option in order to have the Nexus 5 files appear in Windows Explorer.
If you have access to another N5, you could swap motherboards, copy the data, and swap motherboards again.
Background:
my friend has a pantech burst (p9070 at&t) that fell and the screen broke, got it replaced fell again and screen broke again
(Broken meaning no touch no image, its black!)
If i connect it to a pc (when its off (I can't tell when its on or off)) it vibrates and pc recognizes that's it's a pantech android device..
But here is the tricky part, its running ics and usb storage has to be enabled each time its connected to pc. I don't know if the phone has a passcode (if it does I can guess it)
He is not interested in paying for a new screen as its not worth it...
So....
I told my freind that with android you can do anything, and if the files are on the internal storage then it can come off.. My question is, is there a way to have this phone display on my pc (don't have internet on it, usb debugging probably disabled) or with a command line have the phone mount as usb or mtp so I can get the files off??
(I know its possible!!)
Sent from my VS986 using Tapatalk
SOLVED: S7 dropped > broken screen > how to recover images? Not rooted,not "usb mode"
So my wife dropped S7 to the floor and device ended up to be fully powered, but screen is now all black. Back and "software" button illuminates. I can change volume. I can take photos. So phone works, but screen is all black. Main concern is to have photos out from the phone. Contacts are synced, software etc. can be installed to new phone.
Kies finds the phone, but says that is' locked. Although phone does not have any passcodes or fingerprint, Kies cannot access to photos. Also the PC does see the device, but it won't allow me to see the contents. Find My Mobile is not activated, I think that I can't activate it now without phone. Also Smart Switch says that phone is locked. Phone settings are pretty much as out from the box. USB debugging is off, Developper options off, etc...
But I found that possible via ABD (?) I could access phone storage. Is it so? I sould start the phone to Recovery Mode / Download Mode? How to do that? Normally the phone is on and I can't switch it off. I can only soft reset is by keeping vol- + power buttons pressed for 10sec. But after that, phone just restarts to OS.
Please give hints how to proceed. What to try. New LCD is around 50USD and takes forever to get from Aliexpress/Ebay.
Why not use an external display? Hook it up to the USB-connector via an adaptor and it should work to unlock the phone using a PC-mouse.
gedhe said:
Why not use an external display? Hook it up to the USB-connector via an adaptor and it should work to unlock the phone using a PC-mouse.
Click to expand...
Click to collapse
O, it has such feature? Quick googling did not help how to do it. How does it work? Do I need some cable or device?
Any ideas how to proceed? I either can reboot device to Recovery mode and use ADB or connect external display to the device. Or if someone has any better solution
Please help. Family photos are in the phone
Try to unlock your lock screen with a usb mouse connected via otg and swiping up with the mouse. Then connect it to the computer and try to backup your data with kies or switch.
Tried many thing how to allow the connection from another phone or computer. However it was not possible to connect, so I ordered a new screen. Once new screen installed, it was not even a challenge Ordered new screen from Aliexpress.
Hi I am struggling to get data off my old galaxy S9, I have the 2 phones connected via USB but cannot authorise the old phone to transfer data, the screen is FUBAR and as such cannot press" allow" I think that presently the USB mode seems to be charging only, can anyone help? thanks
Use ABD and it comes with the the android SDK from google. But it requires a couple of your phones internal software switches to be set in order to access your phone via the USB interface. If you have not already set these switches before the screen got broken you may be out of luck.
Hi - wondering if anyone out there can think of a solutions to this...
So, my wife cracked her phone screen (Huawai P20) and bought a cheap phone to use short term while we worked out a replacement (Alcatel 1). When setting up the temporary phone, not all of the data from her P20 was install/copied, mainly because there's not enough storage space to hold it all.
Some of the data left on the P20 is really important (downloaded documents/files and pevious whatsapp history), so I was going to hook it up to a PC and grab all the data from it, but the biggest problem is she can't remember the unlock pattern. I know developer mode/USB debugging is not turned on, so I can't even get a PC/ADB to recognise it, plus I've had to connect it to a mouse and monitor (via HDMI/USB adapter) to even view/control the unlock screen.
I'm pretty sure that without the pattern we have little or no options, but was wondering if anyone knew the answers to the following:
Is there any way to unlock the phone using the old PIN that was set (she's confident she knows this)?
Is there a way to unlock using the finger print sensor (even though is says 'pattern required due to restart')
Should ADB list it as a device even though USB debigging is turned off and the phone is screen locked (currently does not list it, but I thought you could PIN unlock via ADB)
Does anyone know any other tools/options for accessiing the files on the phone.
Thanks is advance for any help!
Basically you can access Android's filesystem in ADB-mode or in MTP-mode: the latter should always be possible.
Even if USB Debuging is turned off and the screen is locked? Any tips on how to get the PC to see the device in MTP mode?
Thanks!
My wifey has a Huawei Y7 with HiSuite installed on Windows PC and HDB enabled on phone. As soon as she connects PC with phone over USB, confirms the verification code, phone gets mounted on PC as external USB-drive and thus visible in MTP-mode.
My guess is you have to take your Huawei to authorized service center and let them try to fix it.
Ah Ok. HiSuite asks for USB Debugging to be enabled first, which i can't do because it's locked. Thanks for you help anayway.