[q] [aospa 4.2.1] paranoidandroid 3.0 - Optimus One, P500, V Q&A, Help & Troubleshooting

Paranoid Android 3: http://forum.xda-developers.com/showthread.php?t=2020336
Can anybody tell me how to port a rom from higher resolution devices to lower resolution?
I want to port Paranoid Android 3 from nexus 4 to our LG P500.
I know Nexus 4 is far much better in terms of hardware but after porting, it should work, right?

rhar**** said:
Paranoid Android 3: http://forum.xda-developers.com/showthread.php?t=2020336
Can anybody tell me how to port a rom from higher resolution devices to lower resolution?
I want to port Paranoid Android 3 from nexus 4 to our LG P500.
I know Nexus 4 is far much better in terms of hardware but after porting, it should work, right?
Click to expand...
Click to collapse
why not all in one :3
keep calm and relax, and i will have some surprises for p500 next days

thanx
OldDroid said:
why not all in one :3
keep calm and relax, and i will have some surprises for p500 next days
Click to expand...
Click to collapse
Thanks bro :good:

PACman ROM
PACman rom 19 is out for lg p500. ita pa is sumwat like PA3 though its PA2.99
the link is here: http://forum.xda-developers.com/showthread.php?t=2142413

Hello
I have problem with wifi in JB roms 4.2.2 (4.2.1) The phone can't discover my wifi network (WPA/WPA2).
When i try to discover wifi networks i can see some access points but only with WPS.
Can anybody direct me how to solve this?

Hit Sappen said:
Hello
I have problem with wifi in JB roms 4.2.2 (4.2.1) The phone can't discover my wifi network (WPA/WPA2).
When i try to discover wifi networks i can see some access points but only with WPS.
Can anybody direct me how to solve this?
Click to expand...
Click to collapse
Router firmware upadte solved this prob.

Related

CM10 Nightly 3D Max - WiFi problems

Maybe only a small problem..
I remember, that other devices had the same problem, when switching from stock rom 2.3 to CM9 or CM10.
There we had to remove one or two files an WiFi works..
Maybe a Dev can have a little look at it?
Thank you so much!!
Greetings Cuttero
...for S3 there was a way, but this file I could'nt find
http://forum.xda-developers.com/showthread.php?t=1841680

[q] [rom] [4.2] chuwi v10

How much does it cost to develop ROM (android 4.2), especially cyanogenmod 10.1? To be able to carry it in tablet "CHUWI V10" (10.1 "-quadcore-2gb ram-Allwinner A31).
frankomo31 said:
How much does it cost to develop ROM (android 4.2), especially cyanogenmod 10.1? To be able to carry it in tablet "CHUWI V10" (10.1 "-quadcore-2gb ram-Allwinner A31).
Click to expand...
Click to collapse
All it'll cost is your time really.
Nigeldg said:
All it'll cost is your time really.
Click to expand...
Click to collapse
I'm new in this forum. Do you can help me to contact with somebody who can release this rom without bugs ?
THANKS
cynogenmod
I tried to flash it, but I got a white screen now.
I can't find a way to get it back to work...
android 4.2.2 update
frankomo31 said:
How much does it cost to develop ROM (android 4.2), especially cyanogenmod 10.1? To be able to carry it in tablet "CHUWI V10" (10.1 "-quadcore-2gb ram-Allwinner A31).
Click to expand...
Click to collapse
hey there,
so i managed to get 4.2.2 off the official chuwi forum.
1. If you don't have it yet, here is PhoenixSuit to flash it (let it update, it'll work faster)
2. click on the anchor and point to this file on your PC (it's Android 4.2.2, not rooted, i'm working on that)
3. power off your tablet
4. press and hold volume up (+)
5. connect usb cable
6. press on power button multiple times untill PhoenixSuit asks if you want to flash - IT WILL DO A COMPLETE FLASH OF YOUR TABLET, not the memory card, if you have one.
7. Enjoy Android 4.2.2 with longer battery life, no youtube crashes and better gaming performance
I'm discussing with Christian Troy, dev for tablets, to help port 4.3 or even 4.4 kitkat.
hope this helps and don't forget the thanks button
Great!!!
It workshop soooo good!!! Thanks
hello i need the rom for my v10 !! but the links is not good.
someone can upload it again ?
many thanks !!
Hi there!
Well, I'm gonna have to look to see what happened to the files... I don't own the V10 anymore and forgot about this thread.
I'll get back to you with a response either way.
Sent from my GT-I9195 using XDA Free mobile app

[Q] Will tab 2's hardware be capable of running Android Lollipop?

A curios question i thought, Is there is a chance that the hardware be capable of running the long-awaited Lollipop?
Thanks in advance.
Hassan 4 said:
A curios question i thought, Is there is a chance that the hardware be capable of running the long-awaited Lollipop?
Thanks in advance.
Click to expand...
Click to collapse
If even Motorola Moto E will be able to run Android 5.0, why Tab 2 won't?
We just need to wait for CM12, and a maintainer to give the word to start the builds for our device. Then, we shall enjoy sweetness :3
fr4n said:
If even Motorola Moto E will be able to run Android 5.0, why Tab 2 won't?
We just need to wait for CM12, and a maintainer to give the word to start the builds for our device. Then, we shall enjoy sweetness :3
Click to expand...
Click to collapse
I hope as you say so, Getting bored from KitKat
Hassan 4 said:
I hope as you say so, Getting bored from KitKat
Click to expand...
Click to collapse
My only worry is about Tab 2's CPU. It's kind of outdated... but I hope we still get Android 5.0
Didn't think KitKat would be smooth, but I was surprised at how smmoth it runs, lollipop should be just as good or better.
Pp.
Android is not like windows,
It gets better and faster

Hospot portable wifi and wifi can't be used

hello i need help developers. problems with wifi and portable hotspot on my galaxy tab 2 P3100, I can not be in use at all can't figure out wifi around.and could not be opened if I open wifi is always close by itself,Such events after I installed the rom from the developer.
I really need help the developers and what should I do to wifi in my tab 2 can work normally again.
thanks for help and advice and sorry if my english bad
Which rom are you using?
shsagnik said:
Which rom are you using?
Click to expand...
Click to collapse
I use rom android version of slimlp lollipop.
what I have to do to be able run back the wifi in my tab 2?
Spoiler Alert
That rom is in alpha state and many things are not going to work till Andi releases a stable version
shsagnik said:
Spoiler Alert
That rom is in alpha state and many things are not going to work till Andi releases a stable version
Click to expand...
Click to collapse
well I know it. so I ask in this thread so I can try to fix the issues
and trying to learn how to fix any issues in a new rom/alpha build rom.
may exist that could give direction to me in thread
Okay
shsagnik said:
Okay
Click to expand...
Click to collapse
[emoji56] [emoji56] [emoji56]

[Q] Need a custom rom suggestion

Im kind of new here, so hi Im looking for a good custom rom to flash on my GTab 2 P3110.
Im planning to use it on my car (already got a mount for it), so I need the rom to have a working gps and have compatibility with Here Maps.
Also, it would be good if it was the latest version (Lollipop), but it can be KitKat for the sake of stability and compatibility!
I had a Nexus 7 with AutoDroid installed, but my small cousin managed to crack the screen
So yeah, that's about it. Hope you guys can help me!
solar_myth said:
Im kind of new here, so hi Im looking for a good custom rom to flash on my GTab 2 P3110.
Im planning to use it on my car (already got a mount for it), so I need the rom to have a working gps and have compatibility with Here Maps.
Also, it would be good if it was the latest version (Lollipop), but it can be KitKat for the sake of stability and compatibility!
I had a Nexus 7 with AutoDroid installed, but my small cousin managed to crack the screen
So yeah, that's about it. Hope you guys can help me!
Click to expand...
Click to collapse
Look in the Development thread for 7" tab 2. Either I've tried SlimLP and CM12.1 on my tablet as far as Lollipop goes. If you want a KitKat ROM, SlimKat is a good choice. Be sure to click thanks on @Android-Andi in the ROM thread if you choose one of those. (Always click thanks on the ROM developers OP in the ROM thread)
jrc2 said:
Look in the Development thread for 7" tab 2. Either I've tried SlimLP and CM12.1 on my tablet as far as Lollipop goes. If you want a KitKat ROM, SlimKat is a good choice. Be sure to click thanks on @Android-Andi in the ROM thread if you choose one of those. (Always click thanks on the ROM developers OP in the ROM thread)
Click to expand...
Click to collapse
I've tried both Lollipop ROMs. SlimLP causes Here to crash rly often (an user also reported that on the thread). So far, CM 12.1 is being stable as I needed. Thanked Andi already, he's an incredible guy! Also, thx for the suggestion, my friend
solar_myth said:
I've tried both Lollipop ROMs. SlimLP causes Here to crash rly often (an user also reported that on the thread). So far, CM 12.1 is being stable as I needed. Thanked Andi already, he's an incredible guy! Also, thx for the suggestion, my friend
Click to expand...
Click to collapse
No problem! I am also running CM12.1 at the moment. Make sure you edit the thread title and add "[SOLVED]" to the beginning of it before "[Q]".
Have a great weekend!

Categories

Resources