[Q] Stuck in boot loop... Tried everything on forum Help plz!! - AT&T, Rogers HTC One X, Telstra One XL

Hi,
I am not sure what went wrong but I am stuck on boot loop. After rooting the device I tried installing viperx and then followed exactly what was on the forum for the installation. But now it's stuck. Tried erasing cache, rebooting and installing a different rom (CM 10) not helping... Now even the recovery is not working
Somebody help please

strommer666 said:
Hi,
I am not sure what went wrong but I am stuck on boot loop. After rooting the device I tried installing viperx and then followed exactly what was on the forum for the installation. But now it's stuck. Tried erasing cache, rebooting and installing a different rom (CM 10) not helping... Now even the recovery is not working
Somebody help please
Click to expand...
Click to collapse
Boot to boot loader. Flash latest twrp with fast boot. Boot to recovery. Flash viper.
Also why post twice?
Sent from my One X using xda app-developers app

exad said:
Boot to boot loader. Flash latest twrp with fast boot. Boot to recovery. Flash viper.
Also why post twice?
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Thanks for the quick reply... modified the post a little on secind post.. flashed twrp.. that is now working.. tried flashing viper.. but it gives an error messageand reboots...

strommer666 said:
Hi,
I am not sure what went wrong but I am stuck on boot loop. After rooting the device I tried installing viperx and then followed exactly what was on the forum for the installation. But now it's stuck. Tried erasing cache, rebooting and installing a different rom (CM 10) not helping... Now even the recovery is not working
Somebody help please
Click to expand...
Click to collapse
Reinstall viper rom and in kernel question put no
Sent from my SPH-L900 using xda premium

strommer666 said:
Thanks for the quick reply... modified the post a little on secind post.. flashed twrp.. that is now working.. tried flashing viper.. but it gives an error messageand reboots...
Click to expand...
Click to collapse
What error message? Could be a bad DL did you check the checksum? Did you wipe cache dalvik system factory reset and wipe within ROM installer?
Sent from my One X using xda app-developers app

S_sWaY said:
Reinstall viper rom and in kernel question put no
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Here go here this guy had the same problem
http://forum.xda-developers.com/showthread.php?t=2140098
Sent from my SPH-L900 using xda premium

exad said:
What error message? Could be a bad DL did you check the checksum? Did you wipe cache dalvik system factory reset and wipe within ROM installer?
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
This is the error that I am getting:-
--Checking Model ID
assert failed: getprop("ro.product.device") == "endeavoru" || getprop("ro.build.product") == "endeavoru" || getprop("ro.product.board") == "endeavoru"

strommer666 said:
This is the error that I am getting:-
--Checking Model ID
assert failed: getprop("ro.product.device") == "endeavoru" || getprop("ro.build.product") == "endeavoru" || getprop("ro.product.board") == "endeavoru"
Click to expand...
Click to collapse
S_way had the answer above post.
Sent from my One X using xda app-developers app

Wrong version, you need viperxl not viperx
Sent from my HTC One XL

954wrecker said:
Wrong version, you need viperxl not viperx
Sent from my HTC One XL
Click to expand...
Click to collapse
Thanks a lot.. Sorry for all the trouble ...Downloading viper xl now... will let you know if it works out...

This may seem like a dumb question.. But can you tell me where to find viperxl ? It's just that I don't want to take any chances this time

http://forum.xda-developers.com/showthread.php?t=1868236
Sent from my HTC One XL

954wrecker said:
http://forum.xda-developers.com/showthread.php?t=1868236
Sent from my HTC One XL
Click to expand...
Click to collapse
Thanks just to get it clear.
After downloading the ROM. I copy it to my phone using the recovery. Then I install the ROM. Selecting no for custom kernel. Then after this is done flash boot.img to the phone via bootloader. And this should get my phone running on ViperXL.
Am I correct?
P.S. Sorry for the late replies I can only message every 5 minutes

strommer666 said:
Thanks just to get it clear.
After downloading the ROM. I copy it to my phone using the recovery. Then I install the ROM. Selecting no for custom kernel. Then after this is done flash boot.img to the phone via bootloader. And this should get my phone running on ViperXL.
Am I correct?
P.S. Sorry for the late replies I can only message every 5 minutes
Click to expand...
Click to collapse
From what I understand viperxl flashes the boot.img for you (I could be wrong) so you don't have to but if it boot loops then you can flash the boot.img
Sent from my One X using xda app-developers app

exad said:
From what I understand viperxl flashes the boot.img for you (I could be wrong) so you don't have to but if it boot loops then you can flash the boot.img
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Managed to install the ROM!! But now it's stuck on the viperxl screen for the past 6-7 minutes...Once it showed up the options for selecting a language but after that it it again got stuck on the viperxl screen... Is this normal? Should I restart or something?

strommer666 said:
Managed to install the ROM!! But now it's stuck on the viperxl screen for the past 6-7 minutes...Once it showed up the options for selecting a language but after that it it again got stuck on the viperxl screen... Is this normal? Should I restart or something?
Click to expand...
Click to collapse
The dalvik cache wipe gave an error.. Could that be an issue? I tried rebooting it still gets stuck on the viperxl screen everytime...

strommer666 said:
Managed to install the ROM!! But now it's stuck on the viperxl screen for the past 6-7 minutes...Once it showed up the options for selecting a language but after that it it again got stuck on the viperxl screen... Is this normal? Should I restart or something?
Click to expand...
Click to collapse
Did you check checksum when you downloaded to make sure there was no corruption?
If so, try wiping cache, dalvik, system, factory reset and reflash the rom.
Make sure to wipe within ROM installer too.
Sent from my One X using xda app-developers app
---------- Post added at 12:17 AM ---------- Previous post was at 12:17 AM ----------
strommer666 said:
The dalvik cache wipe gave an error.. Could that be an issue? I tried rebooting it still gets stuck on the viperxl screen everytime...
Click to expand...
Click to collapse
What error?
Sent from my One X using xda app-developers app

exad said:
Did you check checksum when you downloaded to make sure there was no corruption?
If so, try wiping cache, dalvik, system, factory reset and reflash the rom.
Make sure to wipe within ROM installer too.
Sent from my One X using xda app-developers app
---------- Post added at 12:17 AM ---------- Previous post was at 12:17 AM ----------
What error?
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
It didn't go through the first time.. I flashed the rom again after wiping everything.. got it working !! I didn't choose HTC sense last time I guess that was the problem...
Anyways Thanks a lot for your help... Couldn't have done anything without you, was **** scared.. Thanks a lot...

strommer666 said:
It didn't go through the first time.. I flashed the rom again after wiping everything.. got it working !! I didn't choose HTC sense last time I guess that was the problem...
Anyways Thanks a lot for your help... Couldn't have done anything without you, was **** scared.. Thanks a lot...
Click to expand...
Click to collapse
Anytime!
Sent from my One X using xda app-developers app

strommer666 said:
This is the error that I am getting:-
--Checking Model ID
assert failed: getprop("ro.product.device") == "endeavoru" || getprop("ro.build.product") == "endeavoru" || getprop("ro.product.board") == "endeavoru"
Click to expand...
Click to collapse
-.- you're lucky you didn't format system before flashing that ROM, or guess what? Your phone would never turn on or work again.

Related

[Q] Error when flashing ROM?

Im trying to flash the superlite rom by vincom but every time i try to flash it throws out an error.
assert failed: getprop("ro.product.device") ==
getprop("ro.product.device") == "skyrocket"
E:Error in /tmp/sideload/package.zip
(status 7)
*verifying filesystems...
*verifying partition sizes...
Error flashing zip '/sdcard/superlite_cm10_jb_v
Injecting TWRP into boot image...
TWRP injection complete
It says the flash is successful but the phone doesn't boot after flash. I have checked the md5 of the ROM, wiped everything, basically followed all the instruction in vincoms post to the letter but no dice. I'm on rogers.
Error 7 is assert protection it's seeing your phone model is different from the phone model in the updater script of the rom meaning either A. Turn off assert checks or B. Do you own a skyrocket and not a 989?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Illnevertell said:
Error 7 is assert protection it's seeing your phone model is different from the phone model in the updater script of the rom meaning either A. Turn off assert checks or B. Do you own a skyrocket and not a 989?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
How do I go about turning off assert checks? My phone model is SGH-I727R so yes, skyrocket
Also, could the problem be that I am using twrp 2.1.2? Im not sure how to flash 2.2.0 onto my system, google searches are unreliable and installing via goomanager does not work for me
generelkickass said:
Also, could the problem be that I am using twrp 2.1.2? Im not sure how to flash 2.2.0 onto my system, google searches are unreliable and installing via goomanager does not work for me
Click to expand...
Click to collapse
I have never used TWRP but you should be able to flash the newer version in recovery just as you would to update CWM.
------------------------------------------------
Sent from my Skyrocket i727 running AOKP JB
One does not simply search on XDA
Twrp isn't the issue do a little digging son learn your recovery it's not real hard
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Illnevertell said:
Twrp isn't the issue do a little digging son learn your recovery it's not real hard
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Just so happened I soft bricked my phone, after resetting everything (and installing twrp 2.2.0) the flash worked! Thanks for your time and help, hope you dont hate me for being a noob! Thanks to vincom for the great ROM!
generelkickass said:
Just so happened I soft bricked my phone, after resetting everything (and installing twrp 2.2.0) the flash worked! Thanks for your time and help, hope you dont hate me for being a noob! Thanks to vincom for the great ROM!
Click to expand...
Click to collapse
I have no issue with noobs it's stupid noobs that bother me I will say a quick Google search of the error would have given you an idea of where to start searching is your friend heads up
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

[Q] Bootloop + E: Unable to mount '/data'

I try to install kernel ElementalX-6.4 on viperxl 3.2.7. Now im stuck in infinite bootloop. When i try to do anything i got the error E: Unable to mount '/data'.
S-on
hboot 2.20
Fastboot work
Adb does not.
Can't flash a rom because of the error
Flash boot.img via fastboot (success but still stuck un bootloop)
I realy dont know what to do at this point. I search a lot but i dont realy know wich method i should use for my phone.
Hboot 2.20?travel into the future?
What version of TWRP?
Sent from my One X using xda app-developers app
exad said:
Hboot 2.20?travel into the future?
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
MM my bad, HBOOT 2.14 Up since 4h00am trying to fix he phone
TWRP v2.3.3.1
k00p3r said:
MM my bad, HBOOT 2.14 Up since 4h00am trying to fix he phone
Click to expand...
Click to collapse
What version of TWRP?
Sent from my One X using xda app-developers app
---------- Post added at 08:15 AM ---------- Previous post was at 08:11 AM ----------
You also said when you try to do anything you get error e: unable to mount /data.. What's "anything"?
Sent from my One X using xda app-developers app
exad said:
What version of TWRP?
Sent from my One X using xda app-developers app
---------- Post added at 08:15 AM ---------- Previous post was at 08:11 AM ----------
You also said when you try to do anything you get error e: unable to mount /data.. What's "anything"?
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
TWRP v2.3.3.1
i got the error when i try to:
Wipe cache
Wipe dalvik cache
install rom
install kernel
Try Fastboot erase cache, flash super wipe, install Rom, let Rom boot up, flash kernel. Then Fastboot flash boot boot. Img
Sent from my One X using xda app-developers app
exad said:
Try Fastboot erase cache, flash super wipe, install Rom, let Rom boot up, flash kernel. Then Fastboot flash boot boot. Img
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Try Fastboot erase cache OK
flash super wipe, How do i do that? i do a search but im realy not sure
install Rom, let Rom boot up,
flash kernel.
Then Fastboot flash boot boot. Img
BTW, Thank you for your help! you will save my day.
http://forum.xda-developers.com/showthread.php?t=1946784
Sent from my One X using xda app-developers app
I did not do superwipe since i don't know how but i try to re-install the rom and it work ! look like just erasing the cache with fastboot work for me ! THANK YOU
Next retry to s-off.
Last month a cant pass the supercid step. Do you have any idea why?
Super Cid won't work for you. You need to hex edit your Cid in.
Sent from my One X using xda app-developers app

Trouble getting Miui to boot....again

Okay so Im trying to install miui v5 but im having isuues getting it to boot...again. ok so when v4 3.2.22 first came out I couldnt get it to boot. I would install the rom, then gapps and could not get it to boot past the optimizing apps screen. it would just stay at starting apps. I was told by another user to flash rohans kernel version b5 as that has worked for him on a different rom, and it worked for me. Now trying to install V5 its been a nightmare. when just installing the rom, then gapps I could not get it to boot past the splash screen. it would load it for a second then just go to a black screen. I then tried installing rohans kernel version b5 but now I get stuck at the starting apps screen I tried wiping cache and dalvik and that did nothing. tried installing different kernels and most I tried wouldnt let me get past the boot animaion Im using twrp 2.3.1.0, Im s-off and I even tried lowering my hboot from 1.14 to 1.09 just incase that might be it but nope. im no sure what else to do and help would be greatly appreciated
avery.0 said:
Okay so Im trying to install miui v5 but im having isuues getting it to boot...again. ok so when v4 3.2.22 first came out I couldnt get it to boot. I would install the rom, then gapps and could not get it to boot past the optimizing apps screen. it would just stay at starting apps. I was told by another user to flash rohans kernel version b5 as that has worked for him on a different rom, and it worked for me. Now trying to install V5 its been a nightmare. when just installing the rom, then gapps I could not get it to boot past the splash screen. it would load it for a second then just go to a black screen. I then tried installing rohans kernel version b5 but now I get stuck at the starting apps screen I tried wiping cache and dalvik and that did nothing. tried installing different kernels and most I tried wouldnt let me get past the boot animaion Im using twrp 2.3.1.0, Im s-off and I even tried lowering my hboot from 1.14 to 1.09 just incase that might be it but nope. im no sure what else to do and help would be greatly appreciated
Click to expand...
Click to collapse
Wipe everything. Install your rom only. Does it boot?
exad said:
Wipe everything. Install your rom only. Does it boot?
Click to expand...
Click to collapse
no. It loads the splash screen for a second then goes to a black screen.
You've verified the md5 right?
Boot to bootloader/fastboot and do fastboot erase cache in command prompt then wipe everything cache, dalvik, system, factory reset, then flash rom.
Does it boot?
Sent from my HTC One X using xda app-developers app
exad said:
You've verified the md5 right?
Boot to bootloader/fastboot and do fastboot erase cache in command prompt then wipe everything cache, dalvik, system, factory reset, then flash rom.
Does it boot?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
redownloaded 3 times. erased cache. wiped everything and same problem as before loads splash screen then back screen
Redownloading != checking md5 you could Redownload 500 times and all 500 downloads could have corruption of some sort.
You did fastboot erase cache?
If you're positive your download is good and after fastboot erase cache and wiping everything isn't working. Your last step is to s-off if you're not already and ruu to the latest version then flash twrp then wipe everything then flash the rom.
Sent from my HTC One X using xda app-developers app
exad said:
Redownloading != checking md5 you could Redownload 500 times and all 500 downloads could have corruption of some sort.
You did fastboot erase cache?
If you're positive your download is good and after fastboot erase cache and wiping everything isn't working. Your last step is to s-off if you're not already and ruu to the latest version then flash twrp then wipe everything then flash the rom.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Just making sure since I have only researched slightly, since im s-off If i run the latest unrootable RUU Id still be able to unlock bootloader and regain root?
What other roms have you tried to flash? Is Mui the only ones giving you problems? Try other ones to see if it is not a bad twrp. It may not be wiping correctly.
Sent from my HTC One X using xda premium
Venomtester said:
What other roms have you tried to flash? Is Mui the only ones giving you problems? Try other ones to see if it is not a bad twrp. It may not be wiping correctly.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
every other rom ive flashed boots fine its only miui that gives me problems. It boots for other people fine so I dont think its the rom and I tried to install on CWM and still have issues
I had the same problem with Chameleon. Took four different downloads to get it. Avatar took a few too lol. Take above advice. Check sum. Might even try wiping cache in adb.
Sent from my HTC One X using xda premium
Venomtester said:
I had the same problem with Chameleon. Took four different downloads to get it. Avatar took a few too lol. Take above advice. Check sum. Might even try wiping cache in adb.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
noob question but how do I find the md5?
avery.0 said:
noob question but how do I find the md5?
Click to expand...
Click to collapse
Search MD5 Sum Checker. It's a program that is pretty self explanatory and will check it for you. The MD5 is attached to the download. You copy it from the site and past it in the checker.
And after you s-off you don't need to re lock to ruu so you won't lose bootloader unlock
Sent from my HTC One X using xda app-developers app
Running the 3.18 RUU fixed my problems. Thank you both for the help
Sent from my HTC One X using xda premium

stuck in bootloop please help!!!!

i am stuck in a bootloop i was on viperxl 3.2.7 and tried to install HatkaXL 4.7.1 and got stuck in the bootloop so i did the fastboot commands -fastboot flash boot boot.img, and fastboot earse cache it said okay, finished on both so i tried to bootup and still in bootloop so i tired going back to viperxl and used same commands and nothing still stuck . it gets into the viper screen and then just shuts down and tries to boot again please help!! i really have tired everything
shooter489 said:
i am stuck in a bootloop i was on viperxl 3.2.7 and tried to install HatkaXL 4.7.1 and got stuck in the bootloop so i did the fastboot commands -fastboot flash boot boot.img, and fastboot earse cache it said okay, finished on both so i tried to bootup and still in bootloop so i tired going back to viperxl and used same commands and nothing still stuck . it gets into the viper screen and then just shuts down and tries to boot again please help!! i really have tired everything
Click to expand...
Click to collapse
Did you check the md5 of the Rom? May have been a bad download. Have you tried to flash anything else to see if that would install?
Sent from my HTC One X using xda app-developers app
31ken31 said:
Did you check the md5 of the Rom? May have been a bad download. Have you tried to flash anything else to see if that would install?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
yes i tired to reinstall viperxl after HatkaXL 4.7.1 it didnt boot. just curious but was does the md5 do? never used it
shooter489 said:
i am stuck in a bootloop i was on viperxl 3.2.7 and tried to install HatkaXL 4.7.1 and got stuck in the bootloop so i did the fastboot commands -fastboot flash boot boot.img, and fastboot earse cache it said okay, finished on both so i tried to bootup and still in bootloop so i tired going back to viperxl and used same commands and nothing still stuck . it gets into the viper screen and then just shuts down and tries to boot again please help!! i really have tired everything
Click to expand...
Click to collapse
Did you extract the ViperXL or Hatka XL boot image from the zip file and place it in the working abd folder? Did you wipe in twrp first? Factory reset, System, Cache, Dalvik Cache? Do fastboot erase cache then fastboot boot boot img?
---------- Post added at 03:48 PM ---------- Previous post was at 03:45 PM ----------
shooter489 said:
yes i tired to reinstall viperxl after HatkaXL 4.7.1 it didnt boot. just curious but was does the md5 do? never used it
Click to expand...
Click to collapse
Oh no. Here we go lol.
Venomtester said:
Did you extract the ViperXL or Hatka XL boot image from the zip file and place it in the working abd folder? Did you wipe in twrp first? Factory reset, System, Cache, Dalvik Cache? Do fastboot erase cache then fastboot boot boot img?
Click to expand...
Click to collapse
okay hold on ill try that..
Venomtester said:
Did you extract the ViperXL or Hatka XL boot image from the zip file and place it in the working abd folder? Did you wipe in twrp first? Factory reset, System, Cache, Dalvik Cache? Do fastboot erase cache then fastboot boot boot img?
---------- Post added at 03:48 PM ---------- Previous post was at 03:45 PM ----------
Oh no. Here we go lol.
Click to expand...
Click to collapse
it worked omg thank you guys so muchh!!!!!!! i thought my phone was dead and i would have to send it in for a jtag repair.. i did what u said earse cache and then the boot.img, then booted right into twrp and flashed viper and it worked! thank you again. i love xda's community so helpful u are a lifesaverrr
shooter489 said:
it worked omg thank you guys so muchh!!!!!!! i thought my phone was dead and i would have to send it in for a jtag repair.. i did what u said earse cache and then the boot.img, then booted right into twrp and flashed viper and it worked! thank you again. i love xda's community so helpful u are a lifesaverrr
Click to expand...
Click to collapse
You are welcome. But before you try to flash again please see http://forum.xda-developers.com/showthread.php?t=2136172
Again.. lack of reading lol :banghead:
Sent from my HTC One X using xda app-developers app
31ken31 said:
Again.. lack of reading lol :banghead:
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Yes lol. But somebody has to help them. Saving the world one phone at a time.
Venomtester said:
Yes lol. But somebody has to help them. Saving the world one phone at a time.
Click to expand...
Click to collapse
DUN DUN DUN DUN DUNNNNNN! Sorry had to it.
Sent from my Carbon-ize Evita using xda-developers app
Venomtester said:
Yes lol. But somebody has to help them. Saving the world one phone at a time.
Click to expand...
Click to collapse
Makes me wonder how illiterate people manage to type if they can't read.. Google has to have one hell of a app I havent found yet
Sent from my HTC One X using xda app-developers app
While I was on my way to work, I decided to read the FAQs on the bus. And I must say, either it is because I knew every answer, or people want their hand held. Going for the latter. But those stickies are there for a reason. Makes sense to read them first. Its like signing a lease. You know what it does, but there are small print and clarification there to help. If you don't read, and something comes up, then the leaser will probably say "You know you done fuk up, right?"
Sent from my Carbon-ize Evita using xda-developers app

HTC One X stuck in boot loop

Hey guys,
So I was trying to flash Cyanogenmod 10.1 to my HTC One X and something went horribly wrong. Now my phone has no rom in the SD card and I never got to the point of making a nandroid backup. The phone boots up and is stuck in the "this build is for development purposes only" mode but I can get into the bootloader by holding down power+volume keys. I have TWRP recovery installed. I was wondering what I can do to restore my phone into normal working mode. I have Hanson2000's all in one kit as well. I really appreciate your help (and please let me know what information you need).
Thanks!
Did you factory reset in bootloader? If you did that has corrupted your sd card and you'll need to format it in Windows.
Sent from my Evita
timmaaa said:
Did you factory reset in bootloader? If you did that has corrupted your sd card and you'll need to format it in Windows.
Sent from my Evita
Click to expand...
Click to collapse
How would I go about doing that?
npat09 said:
How would I go about doing that?
Click to expand...
Click to collapse
Mount usb storage in recovery.
Sent from my Evita
timmaaa said:
Mount usb storage in recovery.
Sent from my Evita
Click to expand...
Click to collapse
Sorry to keep asking questions, what would I put on it after I mount it?
Once it's formatted, copy a ROM onto it so you can flash it. If you're s-on, and have the most recent hboot, you need to manually flash the boot.img after flashing the ROM, that might be why cm didn't boot for you.
Sent from my Evita
timmaaa said:
Once it's formatted, copy a ROM onto it so you can flash it. If you're s-on, and have the most recent hboot, you need to manually flash the boot.img after flashing the ROM, that might be why cm didn't boot for you.
Sent from my Evita
Click to expand...
Click to collapse
I manually flashed the boot.img and also mounted the CM zip. The install still keeps failing. I did a factory reset, did a wipe of cache and Dalvik cache, and then tried the install. This is the error I get:
Skipping MD5 check: no MD5 file found.
assert failed: getprop("ro.product.device") == "endeavoru" || getprop
E: Error executing updater binary in zip '/sdcard/cm10.zip'
Error flashing zip '/sdcard/cm10.zip'
npat09 said:
I manually flashed the boot.img and also mounted the CM zip. The install still keeps failing. I did a factory reset, did a wipe of cache and Dalvik cache, and then tried the install. This is the error I get:
Skipping MD5 check: no MD5 file found.
assert failed: getprop("ro.product.device") == "endeavoru" || getprop
E: Error executing updater binary in zip '/sdcard/cm10.zip'
Error flashing zip '/sdcard/cm10.zip'
Click to expand...
Click to collapse
Stop!!! Dont flash that that's for a different phone. Hense endeavoru..
What are your trying to Install?and where was it downloaded from
Sent from my HTC One XL using xda premium
31ken31 said:
Stop!!! Dont flash that that's for a different phone. Hense endeavoru..
What are your trying to Install?and where was it downloaded from
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
I am trying to put the latest stable release of CM for HTC One X. Can you provide me the right link for it?
You don't have the One X, you have the One XL (codename Evita). This is the link for our device:
http://get.cm/?device=evita
Sent from my Evita

Categories

Resources