Install Android 2.3.6 Firmware on Galaxy Pocket Duos S5302
Reminder
You will lose installed custom ROM such as CM10, Paranoid Android or AOKP after flashing official firmware. Custom ROM will be replaced by official stock ROM.
You will lose custom recovery such as ClockworkMod Recovery or TWRP Recovery if you have any. Custom recovery will be replaced by stock recovery. We will soon write on how to install ClockworkMod recovery on Galaxy Pocket Duos S5302. [Try search box at top-right to get it]
Your device no longer belongs to rooted device once you install this firmware. We will soon write on how to root Galaxy Pocket Duos S5302. [Try search box at top-right to get it]
Though official firmware update usually not erase any system data but we advise you to follow our pre-requisites mentioned on previous page as precaution.
This firmware released by Samsung and flashing of this won’t increase binary counter.
Download this - Click here-
2)Odin Download[
How to Update Galaxy Pocket Duos GT-S5302 to S5302JPLH2 Android 2.3.6 Official Firmware--:good::good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Extract Firmware zip file that you downloaded already from above link, you will get a .tar file and some other files.
Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
Now, put the Galaxy Pocket Duos GT-S5302 phone in Download Mode by pressing pressing and holding down the Volume Down and Home buttons while pressing the Power button until you are welcomed by a green robot indicating you are in Download Mode.
Now run Odin3 v3.07.exe (see Step 2) as an Administrator because Admin privileges is required to complete the process smoothly.
Now connect your Galaxy Pocket Duos GT-S5302 with your PC using USB cable. A message will arrive under Odin’s message box in the bottom left saying “Added!!”. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should then reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
Select these files in Odin at respective tabs from extracted S5302JPLH2 firmware folder :
Click the PDA Button, and select the .tar file here with *code* appearing in its name
Click the Phone Button, and select file with *modem* in its name (leave if there is no such file)
Click the CSC Button, and select file with *csc* in its name (leave if there is no such file)
Click the PIT Button, and select the .pit file. Use only if you got it while extracting in step 1 above, otherwise ignore it.
In Odin window, make sure Auto Reboot and F. Reset Time checkboxes are selected. Also, make sure that Re-Partition checkbox is selected, only if you are using a .pit file (see Step 7.4).
Double check everything that we mentioned in Step 7 & Step 8 above. Now, once satisfied hit the START button to begin the flashing process.
Once flashing completed, you will see a PASS message with green background in the left-most box at the very top of the Odin. The phone will then automatically rebooted and soon you will see the Samsung logo. You can then unplug the USB cable to disconnect your device from computer.
Congrats! Your Galaxy Pocket Duos, model number S5302 should now run on Android 2.3.6 Gingerbread build JPLH2. Go to Settings > About phone to verify this firmware update.:good::good:
thanx bro
I didn't see any links?
Sent from my GT-S5300 using Tapatalk 2
luqman98 said:
I didn't see any links?
Sent from my GT-S5300 using Tapatalk 2
Click to expand...
Click to collapse
google it
Dont joke ok..where's the link
Related
anyone can help me with this? i'm stuck in the bootloop. please.
Flashing Firmware with Odin
Get Odin v3.04 from here:https://androidfirmwares.net/Tools/Download/8
(Just extract the Odin folder)
You will also need to install the Samsung USB drivers for the device if you haven't installed KIES. Get them from here:https://androidfirmwares.net/Tools/Download/9
(Just install like any Windows program)
1. Just download the firmware version you want from the second or third posts and extract the .tar or .tar.md5 file in the archive and save it somewhere,for samsung read here ;http://www.sammobile.com/firmware/
2. Reboot your phone to download mode.
To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key + press the power button .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!
3. Start Odin
4. If your ROM is a single .tar.md5 package click on the PDA button and browse to the .tar or .tar.md5 file that you extracted in step 1 and select it. This should like like the image below
5. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
Regardless of firmware version it's still the same methodology
6. Connect the USB cable and wait for any required drivers to install and the ID:COM section to turn blue like below
7. Click start to flash. If Odin hangs at setting up connection just unplug the USB cable and re-attach it, Odin should now resume
8. Do not disconnect the cable or turn off the device once the flash has started, it will reboot when it finishes.
If the firmware is from this thread it will not wipe your phone if you flash as recommended UNLESS I state that the firmware is a "WIPE" version.
PDA refers to the build version of the software/firmware
Phone refers to the baseband/modem version
CSC is the consumer software customisation and is specific to geographical region and carriers. It contains the software packages specific to that region, carrier branding and also APN settings for data connection, MMS etc for your service provider.
CSC has nothing to do with what languages the firmware supports and it will not add keyboard language support either.
.PIT refers to the partition information table you only need it if you screw up your partition table or if the firmware specifically requires it because of a change in the partition table layout. It's very likely you may never have to use this.
If the package only contains one .tar archive then it will have everything, pda+phone+csc, in the one file.
If it has multiple .tar archive then:
The .tar with modem in the name is the phone/baseband bit of the package
.tar with csc/multi-csc in the name is the csc bit of the package
.tar with code/PDA in the name is the PDA part of the firmware package
If this is the case you will need to put these .tar archives in the specific areas of Odin to flash the update. Refer to the images below.
You do not need to root or unroot the device to update the firmware.
Please ensure that KIES is closed and not running in the system tray! Kies doesn't like Odin, it's like the big brother who's always jealous that his little brother is getting to flash all the phones so he starts to flash block.
Regarding change logs. Samsung thinks firmware should be like a box of chocolates, you never know what you’re gonna get and that all a big part of the surprise user experience program so they don't publish any change logs.
can i flash this honeycomb from ics? like downgrade. last time i do it, it bootloop.
I downgraded to 4.0.4 from ICS Honeycomb 3.2, but I had no problem bootloop...
madkhaz said:
can i flash this honeycomb from ics? like downgrade. last time i do it, it bootloop.
Click to expand...
Click to collapse
yes you can... make sure to wipe cache/factory reset if you have a bootloop.
oh, really? thanks guys
instruction source - http://www.ibtimes.co.uk/articles/4...70-p3110-root-android412-xxdma2-jellybean.htm
I bought my gtab2 few days back. It runs jellybean 4.1.2 Indian version, after going through different outdated rooting guides i thought it would be better if i ask this here. I am about to root my gtab2 following the ibntimes guide . Please tell me if i should do something different or if there's a better way to root. The guide looks fairly simple and straightforward though.
tab properties -
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1) Install USB Driver for Samsung Galaxy Tab 2 7.0 on the computer.
2) Enable USB Debugging Mode. [Press Menu>> Settings>> Applications. From there navigate and click on Development option and ensure the USB Debugging Mode is turned on.]
3) Rooting the tablet will void manufacturer's warranty.
4) The rooting is likely to increase binary counter.
5) Create back-up for all the data of the device.
6) The tablet should have more than 80 per cent of charge.
Steps to root Galaxy Tab 2 7.0 P3110 on Android 4.1.2 XXDMA2 Jelly Bean
1) Download CF-Auto-Root file for Samsung Galaxy Tab 2 7.0 to the computer. Extract the downloaded zip to get a .tar.md5 file
2) Download Odin 3.07 and extract the zip to get Odin3 v3.07.exe along with few other files
3) Switch off the Galaxy tablet. Put the device into Download Mode by pressing and holding the Volume Down and Power buttons together. A warning screen will appear, now press the Volume Down button to enter into Download Mode
4) Run Odin on the computer
5) Connect the Galaxy tab to the computer using USB cable while it is in the Download Mode. A message saying 'Added' will arrive under Odin's message box. When the device is connected successfully, the COM port with a number in Yellow will also appear
[Note: If the 'Added' message does not come then try another USB port. Try the port located at the back side of the computer. In case that does not work too then reinstall USB driver.]
6) In Odin, click the PDA button and select 'CF-Auto-Root-espressowifi-espressowifixx-gtp3110.tar.md5' file
7) Ensure the Auto Reboot and F.Reset Time options are selected in Odin
8) Double check everything and click the Start button in Odin to begin the installation
9) Once the installation process is completed, the device will reboot automatically. And soon a 'PASS' message with green background will appear in the extreme left box at the top of the Odin. Now safely unplug the USB cable from the tablet
Samsung Galaxy Tab 2 7.0 P3110 running on Android 4.1.2 XXDMA2 Jelly Bean firmware is now rooted successfully. To ensure the aforementioned root method is installed and working properly, verify with the Root Checker app which is available at Google Play Store.
There are lots of tuts for rooting already, we dont need another.
Sent from my GT-P3110 using xda app-developers app
sorry for being a bother .. this is the same guide posted by chainfire just rehashed by ibn.
itsrijo said:
sorry for being a bother .. this is the same guide posted by chainfire just rehashed by ibn.
Click to expand...
Click to collapse
To answer your question, yes the guide still works.
Sent from my GT-P3110 using xda app-developers app
This guide is for Samsung Galaxy Star Duos (GT-S5282) but may work with other Samsung android devices also.
NOTE: Click on the images to enlarge them!!!:good:
DISCLAIMER: The intended way to update your droid is through OTA updates or Samsung Kies. Flashing through Odin may involve a certain amount of risk. You are proceeding at your own risk. I am not/will not be responsible for any harm to your device!
1. Install Samsung Kies http://www.samsung.com/kies on your computer and connect your droid with a data cable to your computer after running Kies to install your device drivers. After successful installation of your drivers, disconnect your droid from the computer.
2. Download Odin 3.07 from http://samsung-updates.com/
3. Extract the downloaded file using unzip software. You can use 7zip for the purpose which is a free and open source software. Download 7zip here http://www.7-zip.org/
4. Download stock ROM/firmware for GT-ST5282 from http://samsung-updates.com/device/?id=GT-S5282. Other Samsung devices may download stock ROM/firmware for their respective devices from here http://samsung-updates.com/. Extract the downloaded ROM using 7zip (mentioned above).
5. Open Odin by selecting Odin3 v3.07.exe from the extracted files.
6. The Auto Reboot and F. Reset Time options will be checked by default. Check PDA and select the PDA button to select the extracted ROM file.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. Now switch off your droid and enter into Download Mode. Enter into Download Mode by pressing VOLUME DOWN button, HOME KEY and POWER BUTTON simultaneously. And then, press VOLUME UP button in Warning Page to enter the Download Mode.
The picture given above is for a generic Samsung droid due to pictures of GT-S5282 unavailable...
But overall the screens will be the same in GT-S5282 with the screens shown above.:fingers-crossed:
8. Connect your droid (in Download mode) to your computer via Data Cable. Check whether a communication port [ID:COM] box is highlighted in light blue. If yes, your droid is now successfully connected with the computer and ready to flash the stock ROM into the device.
9. Start flashing the stock ROM into your droid by clicking the Start Button in Odin. After sometime a BLUE coloured "RESET!" sign will appear on the upper-left box of Odin. Do not disconnect your droid yet!
10. A few minutes later, a green coloured "PASS!" sign will appear on the upper-left box of Odin if the stock ROM has been successfully flashed into your droid.
11. Disconnect your droid from your computer. You have now successfully flashed stock ROM into your droid...!!!:victory:
12. Once your droid boots up, go to Settings>System>About device>Kernel version and check your firmware version.
If I have helped you to flash stock ROM on your GT-S5282, please press the THANKS button...:good:
Anyone tested this method?
Redaaku said:
Anyone tested this method?
Click to expand...
Click to collapse
HI,
Just tried it two minutes ago...worked like a charmed (back on stock samsung...but not for long)
http://samsung-updates.com/ website is down so not relevant for downloading stock roms anymore
CF-Auto-Root is available for both International and carrier locked versions of Galaxy S3.
As CF-Auto-Root installs or keeps the stock recovery i included the steps to install the ClockworkMod Recovery which you can skip if not needed.
Supporting Models of Galaxy S3 :
- GT-I9300
- GT-I9300T
- GT-I9305
- GT-I9305T
- GT-I9305N
- SHV-E210K
- SHV-E210L
- SHV-E210S
- SHW-M440S
What's installed
- SuperSU binary and APK
- Stock recovery
Requires:
- A windows computer with Galaxy s3 driver installed ( Use Kies ).
- Odin
- Any of the Galaxy S3 model listed in the Supporting Models with more than 50% battery.
- USB Cable
Note:
- This root increases your flash counter. You should run Triangle Away after rooting if want to reset the counter.
- Backup all your important data
- Kill all the Kies processes using Windows Task Manager
- Disable Antivirus
Disclaimer:
Rooting or installing recovery may brick your phone or void warranty. I am not responsible for anything. Do at your risk.
HOW TO ROOT GALAXY S3 USING CF-AUTO-ROOT ?
1. Download and extract Odin3-v1.85_technoxide.com.zip
2. Download and extract CF-Auto-Root-xx-xxxx-modelnumber.zip for your device model from Official XDA thread.
( I am downloaded CF-Auto-Root-m0-m0xx-gti9300.zip as my device model is I9300 )
3. In your PC open Odin3 v1.85.exe
4. Click PDA button and select CF-Auto-Root-xx-xxxx-modelnumber.tar.md5
( Mine is CF-Auto-Root-m0-m0xx-gti9300.tar.md5 )
5. Boot your phone to download mode ( Turn off phone, after all the lights gone press volume Down + Home + Power .If it asks to press a button to continue, press the listed button ).
5. Now, Connect the phone to PC using USB cable.
6. If everything correct Odins ID:COM box it will be in yellow or blue color with a port name.
7. Make sure Re-partition is NOT checked.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8. Finally Click Start button and wait till the phone reboot.
After complete update Odin will show PASS on top left and phone will reboot.
That's it....You are successfully Rooted your phone.... Now follow the steps below if you want to install ClockWorkMod recovery.
HOW INSTALL CLOCKWORKMOD RECOVERY IN SAMSUNG GALAXY S3 ?
Note
Installing recovery steps and images are made based on Galaxy S3 I9300... if you have another one use the correct one for your model.
1. Install and open ROM Manager
2. Click Recovery Setup.
http://2.bp.blogspot.com/-ayjbsrknzPg/Ug0lcvwiw8I/AAAAAAAABGo/eQiOKgnZJwg/s320/Rom-Manager-Recovery-Setup.png
3. In the next screen select ClockWorkMod Recovery under INSTALL OR UPDATE RECOVERY.
4. In the next screen click on Phone Model
Finally in the next screen click Flash ClockworkMod Recovery and wait till it finishes the download and installation.
* if you want to install ClockWorkMod Touch version click on the toggle button before doing the 5th step.
That's it...done...To check the ClockWorkMod recovery boot to recovery either by holding the Volume up + Home + Power or by clicking the Reboot into Recovery in ROM Manager.
There is no need for 2 same threads about rooting phone..
http://forum.xda-developers.com/showthread.php?t=2235366 here is already one and these sort threads belongs in Samsung galaxy S3 Development or Q&A section of the S3
Fantassy123 said:
There is no need for 2 same threads about rooting phone..
http://forum.xda-developers.com/showthread.php?t=2235366 here is already one and these sort threads belongs in Samsung galaxy S3 Development or Q&A section of the S3
Click to expand...
Click to collapse
I put this here for a guy that couldn't get into development and for who ever else cant get in there and ask questions. Thats why it says guide for noobs.
sorry for the inc
I tried the above mentioned solution but it doesnt work for me!
NAND Write start!!
FAIL!
Hello everyone today I found Samsung S3 Neo GT-I9300I KitKat 4.4.4 Update,now no more just go install official kitkat on your S3 Neo GT-I9300I and video tutorial of how to udate it...
Steps to Install Android 4.4.4 KitKat Update on Galaxy S3 Neo I9300I
Step 1- Download Android 4.4.4 I9300IXXUBNH3 for Galaxy S3 Neo on computer and extract the zip file.
Step 2- Download ODIN v3.09 which is needed to install Android 4.4.4 on Galaxy S3 Neo.
Step 3 – Power off your phone and boot it into Download mode. To do so, press and hold Volume Down and Home buttons together, and then hit Power button till you see the construction Android robot and a triangle. Then tap Power again to confirm progress into Download Mode.
Step 4 - Ensure Galaxy S3 Neo USB drivers are installed on your computer.
Step 5 - Launch ODIN on computer and connect your phone to it while your phone is still in Download Mode.
Step 6 - Once the phone connects successfully, one of the ID: COM boxes will turn yellow with the COM port number. This step may be time consuming.
Step 7 - Now choose the files that need to be flashed / installed on your phone, which can be found among the extracted files in Step 1.
Click on 'AP' and select file named 'CODE'.
Click on 'CP' and select file named 'MODEM'.
Click on 'CSC' and select file with CSC' in its name.
Click on 'PIT' and select the .pit file.
Note: Ignore the last three steps if the files are missing.
Step 8 - In ODIN, select the Auto Reboot and F. Reset Time options. But, the Re-Partition option must be checked ONLY if you chose a .PIT file in the above step.
Step 9 - Now click on the Start button in ODIN and the installation process will begin. It should take just a few minutes to complete.
Step 10 - After the installation is completed, your phone will restart. When the home screen appears, just unplug your phone from the computer.
Your Samsung Galaxy S3 Neo has now been updated to Android 4.4.4 build XXUBNH3 OTA firmware. Go to Settings > About phone to verify the firmware installed,and change the language you prefer becuse it is set as default language to Kaizi and thats it...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[YOUTUBEhttp://youtu.be/r8--WcWriTI][/YOUTUBE]
Please Press Thanks If You Like it...
Good of you to post here. But It should really be posted in Galaxy S III General forum for the users of that device.