Database Info

[HOWTO] Running debian via chroot on OO

This tutorial is based on this one for G1: http://www.saurik.com/id/10
Hi,
I'll show you how to run debian in chroot on our optimus one. It wont affect android in any way, and they can run simultaneously, side by side. You are only running bash from debian, not its kernel or any other low-level part. But you can use debian's programs.
Requirements
* Linux on your pc or in virtual machine
You need debootstrap to make debian image, so you need debian distro (maybe in *buntu it is too, but I am not sure). You dont need GUI, bash is all you need.
* Busybox(-> rooted phone)
Most custom roms comes with busybox, I am not sure how about store ROM.
* Terminal emulator on phone and/or ADB
I suggest you to make sure you have adb, because you dont wanna write it all on small touch keyboard.
Some knowledge about linux systems
If you are following this tutorial only because you want to /flex on your friends and you dont know anything about linux, then you really _should_ stop reading this tutorial.
I also recommend you to have a2sd, so we can put debian image on its partition, when it is on sdcard main partition, it _may_ cause some problems with usb mass storage.
So, lets start.
1. Getting debian image
Boot into debian and get bootstrap tool:
Code:
apt-get install debootstrap
Now, create an empty disk image, I'd say minimum size is about 150mb, but I recommend you use more:
Code:
dd if=/dev/zero of=debian.img seek=*size_in_bytes* bs=1 count=1
You need to create ext filesystem in image with this tool(you can try it with "sudo" if you have problems):
Code:
mke2fs -F debian.img
Image is ready now, now lets mount it so we can install debian into it:
Code:
mkdir debian
mount -o loop debian.img debian
Debootstrap tool will do all the work for us. You can try to use squeeze instead of lenny or download it from your country's mirror. "--variant=minbase" argument will install just base system with apt-get and only few other packages. (This also may need sudo)
Code:
debootstrap --verbose --arch armel --foreign lenny debian http://ftp.cz.debian.org/debian
umount debian
2. Mount the image
Now, we will use ADB shell to mount the image and finish debian installation. Do not forget to write "su" before you start, we need root for this.
You need to decide where to put debian.img. I suggest you to put it on a2sd partition, which is system/sd, so :
Code:
cp /sdcard/debian.img /system/sd
export kit=/system/sd
Our mount point will be /data/local/mnt, so lets make some variable to make it easier:
Code:
export mnt=/data/local/mnt
busybox mkdir -p $mnt
We also need to set these enviroment variables, and we can also make alias for busybox so we dont have to write busybox all the time.
Code:
export PATH=/usr/bin:/usr/sbin:/bin:$PATH
export TERM=linux
export HOME=/root
alias _=busybox
Now we need to create loop device for image:
Code:
_ mknod /dev/loop0 b 7 0
And if nothing went wrong, you should be able to mount image now ("mount: no /etc/mtab" is normal) :
Code:
_ mount -o loop,noatime $kit/debian.img $mnt
3. Finalizing installation of debian
With mounted image, we can proceed to second stage of debian bootstrap:
Code:
_ chroot $mnt /debootstrap/debootstrap --second-stage
If you want install some packages with apt-get, you also need to add repo to sources.list. Of course, if you downloaded squeeze instead of lenny, you need to change "lenny" to "squeeze"
Code:
echo 'deb http://ftp.cz.debian.org/debian lenny main' >$mnt/etc/apt/sources.list
Set correct DNS servers - debian can't take them from Android.
Code:
echo 'nameserver 4.2.2.2' >$mnt/etc/resolv.conf
Done, installation over.
4. Running debian bash
To get to debian bash, use this command. You can try "cat /etc/issue.net" or "uname -a" so you can see its really debian.
Code:
_ chroot $mnt /bin/bash
But its not all yet, you need to mount some things for debian:
Code:
mount -t devpts devpts /dev/pts
mount -t proc proc /proc
mount -t sysfs sysfs /sys
Now link mtab to /proc/mounts. You need to do this only once.
Code:
rm -f /etc/mtab
ln -s /proc/mounts /etc/mtab
And if you want to use ssh server to log in into debian, you also should set root pass:
Code:
passwd root
5. Installing packages
First, you need to update packages list:
Code:
apt-get update
and now you can install whatever you want with "apt-get install"!
6. Finishing
I suggest you to write some .sh script so you can mount it all with one command, for example something like this: http://pastebin.com/VT6272d5
What packages have you tested?
sshd - works great, you can connect to phone via putty or ssh
mc - works, but phone screen is to small
gcc-avr - if you are programming for avr microcontrollers, you can compile it on your phone
netcat - telnet connection
git-core - works great
htop - you can see this on screnshot below
apache2 - works like a charm
xfce4, Xorg server and tightvncserver - working but slow, see screenshots
gnash - working but slow, see screenshots. This is the only option how to run flash content on optimus one xD
Iceweasel - if you are using vnc server, you can browse web pages
gcc, g++, autoreconf, cmake and whatever else is needed to build mangos - working
mysql-server - you have to set "user = root" in /etc/mysql/my.conf, but works
MaNGOS - http://getmangos.com/ takes long to build, but works! See this post and also this one.
..and maybe some more which I dont remember.
Hope this tutorial helped you

I'll try bootstrapping debian when I figure out what the hell is wrong with my system. I can't download files from ftp (but I can with wget and other progs. just not with pacman, debootstrap, and the like).

debian on optimus v
searched around to avoid multiple posts, and found this.
I've been running chroot debian on my V as well, squeeze then sid now going back to squeeze.
the main problem I've encountered was in the "debootstrap --second-stage", which generally froze at "I: configuring sysvinit". I thought that was from overloading the CPU, but turns out android init doesn't create /dev/initctl like debian does, so debootstrap hangs waiting for a response reading/writing /dev/initctl
I didn't have that issue using SL4A's shell instead of android terminal.
being a bit of a 'noid, I have used "mknod /dev/initctl p" in the chroot before running "debootstrap --second-stage" since reading of that solution. not sure if it's making much difference, because that didn't fix the issue before I found SL4A and was still using android terminal for shell functions.
I like xfce4 as a window manager in the VNC, it's small but still functional.
I did a bit of things different than saurik, but used his guide extensively, along with much googling for other deb->droid ports.
my chroot runs in the android root directory with bind-mounts since the custom kernel I like doesn't include unionfs. I also directly use an ext4 2nd partition on the SD rather than a loop-mounted filesystem image. (yes, ext4 journals will eventually frag my SD but the cost of another is worth the crash-resistance to me.)
my short-term goal is to mix inits between the two os's and run X through an android app frontend to avoid the framebuffer copy lag from the VNC. my 3 main reasons for debian on the phone are program development (works currently,) flash (actually gnash, and needs a working full-speed access to framebuffer, not working yet,) and emulators for J2ME and MAME (same boat as flash.)
so far trying to run X directly blanks my screen and forces a battery pull to get it back, so kinda giving up that route for the moment.

so installing Archlinux on O1 must be possible? how?

pymebrahimi said:
so installing Archlinux on O1 must be possible? how?
Click to expand...
Click to collapse
All must work, as long as they support running on ARM. AFAIK Arch doesn't have an (official) ARM port. You can try Arch Mobile though

This command fails me
Code:
_ mount -o loop,noatime $kit/debian.img $mnt
The error I get is no device or file exists.
Tried creating more number of loop devises too. Still it didn't work. I am using cyanogemmod 2.3.3 ROM.

onehomelist said:
This command fails me
Code:
_ mount -o loop,noatime $kit/debian.img $mnt
The error I get is no device or file exists.
Tried creating more number of loop devises too. Still it didn't work. I am using cyanogemmod 2.3.3 ROM.
Click to expand...
Click to collapse
What is the exact wording of the error?

The exact error that I get:
Code:
# busybox mknod /dev/loop0 b 7 0
# busybox mount -o loop,noatime $kit/debian.img $mnt
mount: can't setup loop device: No such file or directory

Instead of using $kit/debian.img, try manually pointing to the debian image.
For example, if you have it on the sdcard's debian folder:
Code:
/sdcard/debian/debian.img

That too didn't work.

make sure that debian image is where it should be. Also try to "ls /dev/" and look for loop0 - i had some problems with loop devices on mik's 2.3, but I did not really solved it, because I went back to froyo after while.

The loop0 device exists is /dev. As you have experienced same issue on the same ROM, I am convinced that its a ROM issue.

I just tried to install xorg, xfce4 & tightvncserver - everything work just fine, although its kinda slow

ext partition instead of loop filesystem
Tasssadar said:
I just tried to install xorg, xfce4 & tightvncserver - everything work just fine, although its kinda slow
Click to expand...
Click to collapse
I think it runs faster from a sdcard partition than a loop filesystem, if I remember right. I tested a loop-mounted preconstructed debian img from some tutorial for another device before debootstrapping my own.
partition your card with a second partition, ext2 if you're worried about journalling wearing out your sd, or ext4 if you're more worried about corrupting your precious debian filesystem in a crash or unclean umount. gparted in ubuntu seemed to work well for me.
resize your ntfs partition instead of deleting it or android may complain.
with your debian img mounted as a loop filesystem on a linux box at the same time as your new partition, you can copy everything from the img to the ext partition by:
Code:
cp -av /path/to/loopmountedimg/* /path/to/extpartition
if you replace the loop-mounting code in your boot script with a vold mount of your ext partition, android is supposed to umount the partition cleanly on powerdown or reboot.
on my optimus v, the mount looks like the following in my boot script (I'm posting the comments too for info)
# mount 2nd sdcard partition from vold, should prevent dirty unmount at reboot
# if your linux is on a different partition than 2, substitute that number for the 2 in .../vold/179:2 below
# first unmount it; if not already mounted, system will echo 'umount: can't forcibly umount /dev/block/vold/179:2: Invalid argument' but this isn't an error to worry about
Code:
umount -l /dev/block/vold/179:2
mount -o noatime,exec,suid /dev/block/vold/179:2 /$mnt
maybe someone here can use this info.
also, for anyone who wants to save some hours and bandwidth, I have a basic squeeze debootstrap uploaded to 4shared.
it shouldn't be missing any of the readme's or licensing docs, so it should be GPL ok AFAIK.
resolv.conf and sources.list are already configured for 3g access and the main Debian repository, so it's pretty much plug-n-play.
no extra packages. you'll need to apt-get tightvncserver and a window manager unless you just want the bash shell.
the first time you chroot in, you should use passwd to set a root password, and adduser to get a non-root account on there.
the only glitch is that I accidentally tar'd it into a compressed folder; so you can't just untar it into the ext partition, it needs unpacked with an archive manager. sorry!
here is the filesystem image
uncompressed, 9645 items, totalling 264.3 MB
compressed, 116.3 MB (121929580 Bytes)

Tried to put it on ext2 partition without image, its a bit faster but still very slow.
But i took some screenshots this time. You can see flash (well, gnash) player on optimus one working on last screenshot
And I have one question: is debian using its own libc or android's bionic?

Tasssadar said:
Tried to put it on ext2 partition without image, its a bit faster but still very slow.
Click to expand...
Click to collapse
guess I'm biased, first linux I used was on a 100MHz pentium 1, so this handheld flies by comparison.
But i took some screenshots this time. You can see flash (well, gnash) player on optimus one working on last screenshot
Click to expand...
Click to collapse
I could only get gnash to play ads. boo. froze up iceweasel every time I tried to open a flash video. what browser are you using? oh, man, it's iceweasel, isn't it?? also, chromium just refused to start on my optimus.
And I have one question: is debian using its own libc or android's bionic?
Click to expand...
Click to collapse
pretty sure it's standard debian libc. you could integrate the android toolchain if you were so motivated, probably.

bigsupersquid said:
I could only get gnash to play ads. boo. froze up iceweasel every time I tried to open a flash video. what browser are you using? oh, man, it's iceweasel, isn't it?? also, chromium just refused to start on my optimus.
Click to expand...
Click to collapse
Chromium does not work for me, too.
Well, it froze for me too, but after while it at least got to show what you see on the screenshot
bigsupersquid said:
pretty sure it's standard debian libc. you could integrate the android toolchain if you were so motivated, probably.
Click to expand...
Click to collapse
I was just thinking if this is possible, then normal android aplication could have libc included, if its needed.

Do you know MaNGOS? It is open-source server for World of Warcraft (for more info go to http://getmangos.com/). I just compiled it and I run it on my optimus one. And guess what - without world db, its really fast! I am extracting UDB to database right now, I will post some screenshots and results with full-featured db soon.
And thats why I love linux and android

I got no words to describe my eyes when reading that at the moment.

So, what you might wanna know if you wanna try it too:
All packages needed for mangos to compile are working good, except for mysql server: you need to set "user = root" in my.cnf - it is located in /etc/mysql/ - because you cant put any root rights to any other user than root, so mysql user cant create tcp socket.
You will most likely need swap file - optimus has plenty of RAM, but yet not enough. All you need is to compile kernel with CONFIG_SWAP=y and follow this tutorial: http://www.cyberciti.biz/faq/linux-add-a-swap-file-howto/. 512mb swap is enough. Just for the record, swap is working on optimus one, I think nobody tried it here yet.
Now as for the compilation of mangos, it is mostly working as it is, only problems are intel tbb library and g3dlite library.
TBB is not available for arm yet, so you need to compile without it. Use -DUSE_STD_MALLOC=0 in cmake line.
As for the g3dlite, things are little bit more tricky - you need it, and there are some asm() instructions in it, which are different for arm. I only commented them, because I dont know assembler: https://github.com/Tasssadar/mangos-arm/commit/67c442fa0c10e82b282b83a8fe485588f8786e12
I have no idea how it can even work without all that code in g3dlite, but it just does.
You can use scriptdev2 from its git, theres no problem in it.
Thats all, after that just "make" and get something good to read, because it will take really long. At least 5 hours for compilation and nearly hour and a half for linking of scriptdev2 and mangosd binary.
Creating of databases is just like on normal pc, so I just skip it...same goes for dbc files, maps and vmaps.
Loading of mangos takes around 4 minutes with full-featured db. mangos then takes around 180mb of ram and cpu usage is...surprisingly low, considering the fact that our cpu does not have hw float operations. I tried to clear Azjol Nerub instance (well, solo with gm character) and maximal cpu usage was 60%, when fighting a boss with lots of spawns. I could imagine some 5-man dungeon run would be just fine
Also, you will get slight lag when moving into new location, when phone loads map files from sdcard.
Thats all, see screenshots

[Q] MTP on linux Ubuntu

anyone been able to sync music/video's to there transformer from a linux machine ?
I have all of the mtp stuff set up for other devices, but i cannot get the transformer to show up ...
Any help would be appreciated

I don't believe the TF is an MTP device... it simply mounts as storage. Drag/Drop your music.

crater said:
I don't believe the TF is an MTP device... it simply mounts as storage. Drag/Drop your music.
Click to expand...
Click to collapse
It is actually an MTP device. This allows us to access the storage area without making it unavailable to the device like a USB mount does.
Here's how to get your Transformer to show up in Ubuntu for example. This includes stuff you will have setup but this will help others too.
Code:
$ sudo apt-get install mtpfs
$ sudo mkdir /media/transformer
$ sudo chmod 775 /media/transformer
$ sudo mtpfs -o allow_other /media/transformer
You should now be able to see the device under /media/transformer
To remove the device type:
Code:
$ sudo umount mtpfs
You may also need add a rule for the device to see it in Ubuntu:
Code:
$ sudo vi /etc/udev/rules.d/51-android.rules
Add this line to the 51-android.rules file:
Code:
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0b05", ATTRS{idProduct}=="4e0f", MODE="0666", OWNER="<your user name>" #Asus Transformer
Save the file, then chmod to all read:
Code:
$ sudo chmod a+r /etc/udev/rules.d/51-android.rules

i was reading a guide on xoom forums i believe that told you to edit fstab. is that not necessary? i did it without making a backup and i messed up my mounting points.

Roach2010 said:
It is actually an MTP device. This allows us to access the storage area without making it unavailable to the device like a USB mount does.
Click to expand...
Click to collapse
My mistake, I was completely unaware that they had made this change in honeycomb.
mtpfs works great, I've got it working on my gentoo netbook for managing music and videos on my Creative Xen X-Fi.

Crimton said:
i was reading a guide on xoom forums i believe that told you to edit fstab. is that not necessary? i did it without making a backup and i messed up my mounting points.
Click to expand...
Click to collapse
fstab is for automounts at system startup, I just tried adding an entry for mtpfs but I got 'An error occurred while mounting /media/transformer' so I can't help with that.

I could care less if it auto mounts I just want it to mount at all. so you have tested what you posted above and it definitely works? if so, that is awesome.
Sent from my ADR6400L using Tapatalk
edit: can't get this to work for me how do you get it to mount? if i do sudo mount mtpfs i get:
Code:
mount: wrong fs type, bad option, bad superblock on mtpfs,
missing codepage or helper program, or other error
(for several filesystems (e.g. nfs, cifs) you might
need a /sbin/mount.<type> helper program)
In some cases useful info is found in syslog - try
dmesg | tail or so
if i do /media/transformer i get:
Code:
bash: /media/transformer: Transport endpoint is not connected
i got it to work by starting a new mount point /media/tf101 and setting permissions on it.

I can't get this to work consistently, some times I can see all of the folders in the internal storage some times I only see the playlist folder and sometimes I see no folders and the "Transport endpoint is not connected" error message.
It is also worth noting that everytime I set up a new mountpoint it works but getting the files system to mount again is very unreliable.
Any ideas what this might be?
Don't really fancy setting up a new mount point every I want to transfer files onto the eee pad.
Using Ubuntu 11.04

I just use gmpt on Ubuntu (in the rare ocasions I need it - I mostly get files from Samba share).

Ok, so i got things mounted, but when i try to copy a 5gb file from my 2tb drive to my transformer, it seems to eat up space on my os disk when it tries to transfer. This definitely wont work for me as I only have a couple gigs of space free on my OS disk, which is meant for speed, not lots of storage (my 2tb drive is for that). Why is this happening? Some sort of temporary/caching action going on? Seems like a major design flaw with mtpfs if this is how it works. =(

Magnesus said:
I just use gmpt on Ubuntu (in the rare ocasions I need it - I mostly get files from Samba share).
Click to expand...
Click to collapse
gmtp doesnt seem to be able to see my transform. =(

I use QuickSSHD on my Transformer and sshfs on Linux. It is possible to use public key authentication. For pushing large files I use adb push. MTP works very unreliable. Sometimes files are randomly moved to different directories if they are recognized as media files. So after a few experiments I stay away from mtpfs.
Sent from my Transformer TF101 using Tapatalk

Has anyone figured this out yet, because this is really pissing me off. I understand the benefits of mtp, but if I can't use it linux (Ubuntu) to linux (Android), what's the point?

I use Ubuntu 10.04, AMD-64 bit and gMTP works pretty well. I did have to compile it because I understand that for some Linux versions it is broken.

I'm having problems too with Asus Transformer (Tested on Ubuntu 11.04 64 and 32bits).
I'm unable to transfer big files (like HD videos), it seems the transfer is completed but no file is stored. On the 64bits box I get messages about "the device is not connected" after trying to transfer big files, and I have to remount the device to be able to browse through folders.

Ok, here it's a tip: Enable USB Debugging under Settings → Applications
It seems it works enabling that. I have to do more tests with large files since mtpfs uses my root partition as temporally storage and I run out of free space

levenite said:
I use Ubuntu 10.04, AMD-64 bit and gMTP works pretty well. I did have to compile it because I understand that for some Linux versions it is broken.
Click to expand...
Click to collapse
i just got my 10.1v today and i'm trying to do this, but i havent even found gmtp source for 10.04

lacion said:
i just got my 10.1v today and i'm trying to do this, but i havent even found gmtp source for 10.04
Click to expand...
Click to collapse
I believe this is the link I used:http://chewy509.110mb.com/gMTP.html
Note: When you start gMTP make sure you give it time to initialize.

Crimton said:
[...]
edit: can't get this to work for me how do you get it to mount? if i do sudo mount mtpfs i get:
[...]
i got it to work by starting a new mount point /media/tf101 and setting permissions on it.
Click to expand...
Click to collapse
So wat was your mount command after all ?
Could you share please ?
Because from my point of view I have an additional issue, after my Tablet Mounted, if I try to open (with Nautilus) the mount point I have an error:
In French said:
Impossible d'afficher «*/media/transformer*».
Le type du fichier est inconnu
Click to expand...
Click to collapse
In English said:
Impossible to display « /media/transformer ».
Unknown file type
Click to expand...
Click to collapse

If you are using Fedora with Gnome3, like me.
yum install -y gnomad2
Since there is no mtpfs in the packge repo, use this or compile mtpfs.

Mount Transformer to Linux Mint - automated.

Hey TF owners,
For anyone looking for a way to mount their Transformer to Linux Mint, I wrote a script to automate the process of configuring your machine to allow you to browse/modify files on the tablet's SSD. This will probably also work on Ubuntu, but I have only so far tested it on Linux Mint.
Download the attached file, and run it.
Edit: Connect your Transformer to your PC before running.
Edit 2: You only need to run this script once - not every time you connect the tablet to your PC.
Hit the thanks button/comment if this worked for you. If not, also comment and I/someone will probably help you out. Also, if anyone tests it on Ubuntu successfully, be sure to comment and let people know.
Note: All configuration files are backed up in the script before changes are made. You can always revert safely.
I'll throw in the ever so popular "use at your own risk" for safe measure.
Cheers.
June 29: Updated script uploaded.
-Cleaner
-Removes an unnecessary comment pushed into fstab in the previous script
-Already executable. Just run it. [Thanks MagnusRagnarok for the idea]
-Packed in 7z from Linux Mint this time as opposed to in zip format from the TF, for [hopefully] universal accessibility.
-md5sum 615f2bfa820ee9ac8ea2c967149a2f03 TransformerMount2.7z

ok so maybe a stupid question, but does my tf need to be rooted to try this? also if you can create an automated script to install a linux distro you think it would be possible for you to create a script to root?? btw any idea on what actually works? can the tegra 2 run with compiz??

0lddirtypaki said:
ok so maybe a stupid question, but does my tf need to be rooted to try this? also if you can create an automated script to install a linux distro you think it would be possible for you to create a script to root?? btw any idea on what actually works? can the tegra 2 run with compiz??
Click to expand...
Click to collapse
I thin you've misunderstood the intention of the OP.
It was to be able to mount your Transformer under Linux and be able to read/write the files stored on the Transformer's internal storage. Not to actually install a full blown Linux Distro on your Transformer.

Wow, talk about reading before posting.
Sent from my Transformer TF101 using XDA Premium App

only on linux mint--
does it work on ubuntu?

Yes, this works perfectly on ubuntu

I have a problem extracting the zip file with Ubuntu 10.10
Do I need an alternate unzip program? If so please specify. I do not run MS products.
Error:
7-Zip 9.04 beta Copyright (c) 1999-2009 Igor Pavlov 2009-05-30
p7zip Version 9.04 (locale=en_CA.UTF-8,Utf16=on,HugeFiles=on,4 CPUs)
Processing archive: /tmp/TransformerMount.zip
Extracting TransformerMount.bash Unsupported Method
Sub items Errors: 1

I can extract it with 7zip on Windows on the work computer, and with both Explorer and AndroZip on the TF without issue.
Sent from my Milestone using XDA App

Acer Mod of the script
I'm trying to edit the file for use with an Acer Iconia. So far everything works but the modifying of the android.rules file. You see, it doesn't exist on my laptop (mint 11) in the directory the script looks at nor is there an android.rules file in lib/udev/rules.d. While I could probably write a rules file and make it work, I'd like to know where it comes from and maybe discover why it does not exist on my system. Anyone have any ideas? Also - rootblock - if I can get this to work would you object to my posting it in the Iconia forum? Thanks!
UPDATE:
Creating the file worked fine. Any reason to edit the script to check if the file exists and create it if it doe not or am I the exception to the rule? i.e. Would most users have it there in the first place?

3DSammy said:
I have a problem extracting the zip file with Ubuntu 10.10
Do I need an alternate unzip program? If so please specify. I do not run MS products.
Error:
7-Zip 9.04 beta Copyright (c) 1999-2009 Igor Pavlov 2009-05-30
p7zip Version 9.04 (locale=en_CA.UTF-8,Utf16=on,HugeFiles=on,4 CPUs)
Processing archive: /tmp/TransformerMount.zip
Extracting TransformerMount.bash Unsupported Method
Sub items Errors: 1
Click to expand...
Click to collapse
Probably a bad download. And you could also try file-roller to open it (I think its installed by default, it is on Debian/Gentoo)

Tortel1210 said:
Probably a bad download
Click to expand...
Click to collapse
I installed the "p7zip" deb, re-downloaded a few times with Firefox and even tried wget. Each time I get the same error result. I was more interested in examining the bash file as I do not have a TF yet. Oh well not a big deal.

3DSammy said:
I have a problem extracting the zip file with Ubuntu 10.10
Do I need an alternate unzip program? If so please specify. I do not run MS products.
Error:
7-Zip 9.04 beta Copyright (c) 1999-2009 Igor Pavlov 2009-05-30
p7zip Version 9.04 (locale=en_CA.UTF-8,Utf16=on,HugeFiles=on,4 CPUs)
Processing archive: /tmp/TransformerMount.zip
Extracting TransformerMount.bash Unsupported Method
Sub items Errors: 1
Click to expand...
Click to collapse
Had the same issue with Archive manager - Xarchiver worked, however.

ubuntu & Asus transformer
If anyone having a problem with mtpfs on ubuntu especially version 10.4 ( segfault problem which prevents from mounting the TF), use newer version of mtpfs in the link below.
http://pkgs.org/download/debian-wheezy/debian-main-i386/mtpfs_0.9-3_i386.deb.html.
1. install the package
ubuntu> sudo dpkg -i mtpfs_0.9-3_i386.deb
2. Then run rootblock script if you did not do it.

just wondering, would this have any effect for the adb connections ? My ubuntu cannot find the transformer from adb but could mount it just find

Try This....
anyone having issues try one of the following extensions.. tar.gz would be my first suggestion for those using ubuntu like myself. i also took the liberty of changing the perms to exe on the script before i compressed all these so now all you need to do is
1.download the extension pack i upped
(find the one that works for you)
2.open file
3.execute
*i also tossed the edited script in the pack for anyone who cannot get it to open.
fyi; ark also worked for me to access the file from the op, while my 7z kept erroring out.
​

ari197 said:
just wondering, would this have any effect for the adb connections ? My ubuntu cannot find the transformer from adb but could mount it just find
Click to expand...
Click to collapse
I can access the TF with adb just fine. Just cd to the android-sdk-linux_x86/platform-tools folder containing adb and run:
Code:
./adb devices
or
Code:
./adb shell
if that folder isn't already configured into your path. Works for me anyway.

I've been looking at this and trying to do it with udev instead, since I want the dynamic creation of the folder in /media. Mounting works great, but removing doesn't. So anyone with knowledge of udev rules is more than welcome to give me some hints. Here's the rules so far:
Code:
See below...
The command run when removing works if I enter it as root in a terminal, so it seems to me that it's either not run when removing or it's failing somehow when run from udev. Edit: I've figured out that it's not run at all. Looking into it...
Also, hint for those who follow the manual instructions you could also get the necessary permissions through Users and Groups instead of editing the groups file. You still have to edit /etc/fuse.conf to allow other though.

These are instructions for automatically mounting and unmounting your pad (not keyboard!). This will create (when plugged in and detected) and remove (when unplugged) the Transformer directory under /media, so that the experience is more in line with other USB devices.
For those of you who already have run the script in the first post, you need to do some cleanup. Edit /etc/fstab and /etc/udev/rules.d/51-android.rules and remove the lines which the script created. Which lines in fstab should be straight forward, and in 51-android.rules look for rows that either have no idVendor set or has it set to 0b05. If unsure, post here FIRST before making changes!
This is the content of /etc/udev/rules.d/51-android.rules:
Code:
ACTION=="add", SUBSYSTEM=="usb", ENV{ID_MODEL}=="MTP", ENV{ID_MODEL_ID}=="4e0f", MODE="0666", RUN+="/bin/bash -c 'mkdir -p /media/Transformer && mtpfs /media/Transformer -o allow_other'"
ACTION=="remove", SUBSYSTEM=="usb", ENV{ID_MODEL}=="MTP", ENV{ID_MODEL_ID}=="4e0f", RUN+="/bin/bash -c 'fusermount -u /media/Transformer && rmdir /media/Transformer'"
If you have other Android devices you may or may not have other lines here too. If so, just add these two lines to the end of the file. My Transformer is bought in Sweden so if things don't work for you, maybe there's another idProduct/ID_MODEL_ID out there? Check with lsusb when your pad is plugged in, the vendor (xxxx) and product (yyyy) ID is [xxxx:yyyy] on the line that says ASUSTek Computer Inc. For my pad, the productID/ID_MODEL_ID is 4e0f.
You need to uncomment allow_other in /etc/fuse.conf and add your user to the fuse group (preferably via Users and Groups) apart from adding the above two lines to your 51-android.rules:
Start Users and Groups, choose your user and press Advanced settings. Under the tab User Privileges you should mark Mount user-space filesystems (FUSE).
Open and edit /etc/fuse.conf (see below on how to use nano). Uncomment user_allow_other in the end (remove the # at the beginning of the line).
After this you should reboot your computer. This will have two effects: The udev rules will be reloaded so the changes apply, and your user will have the necessary privileges granted.
Now you can try to plug in your pad and see if it shows up under /media. Give it some time, it takes a while. (Approx. 30 seconds for me.)
A note on editing files from the terminal window
When editing files from the terminal I always use nano. The command is (if opening a file that requires super user rights):
sudo nano [path-to-file]
The editing is straightforward, works just like any other text editor. When you're finished, press Ctrl+X (Exit) and answer the question with Y (if your system is in english that is) if you want to overwrite the earlier file.
Problems?
If you have ADB activated you could try rmbell's udev rules. This removes the match ID_MODEL == MTP and changes the productID to 4e1f. The productID changes depending on what functions are activated, as discussed in this post by ritterkeks. If you want the pad to be mounted with and without ADB activated, you can add all four rules.
If the udev rules doesn't work, run this command in the terminal and see what happens when you plug the pad in:
udevadm monitor --property --udev
Exit with Ctrl+C. Are the values the same as in the udev rules you're using? If not, change accordingly or deactivate some function which has made the productID change.

"unable to mount location" error
I'm getting an error that reads "Unable to mount location"
Then:
fusermount: failed to open /etc/fuse.conf: Permission denied
fusermount: option allow_other only allowed if 'user_allow_other' is set in /etc/fuse.conf
I'm a monkey in a spaceship when it comes to some of this stuff Any idea what I should do (in layman's terms)?
All help appreciated!

I'm not sure if your problem is from the script in the first post or my instructions. But as the message says you need to edit fuse.conf. Also, you need to be a member of the FUSE group.
Open and edit fuse.conf with this command in a terminal:
sudo nano /etc/fuse.conf
Uncomment (remove the #) user_allow_other in the end, exit with Ctrl+X and save with Y.
Start Users and Groups, choose your user and press Advanced settings. Under the tab User Privileges you should mark Mount user-space filesystems (FUSE). I believe that you need to reboot after this change, otherwise the necessary privileges hasn't kicked in.
Try it and let me know

[Guide] Installing Fedora 12 on SGS4G

Good news for this guide:
I've done it already so you just need to download the files and follow these simple instructions:
YouTube Video of earlier stages of me running Fedora 12
0) make sure your Android Device is rooted (added so I get less nonsensical "It doesn't work!!!!!" and more "I followed everything I get an <insert error here> error! HELP!"
1) download files from http://zornco.net/androfedora/
2) extract fedora_scripts.rar and place all four files (bootfedora, unmountfedora, fedora.sh, fedora.img) in /sdcard/fedora/
3) open android terminal emulator
4) run command "su" (you might have to press allow in the Superuser App)
5) run command "cd /sdcard/fedora"
6) run command "sh fedora.sh"
7) run command "bootfedora" If that returns "not found" run "sh /sdcard/fedora/bootfedora"
8) now you're in fedora (should now see [[email protected] /]#)
OPTIONAL:
9) run "service sshd start" - to run an SSH server
P.S.: I set the root password to password
P.S.S.: I'm pretty sure it's impossible to screw up your Android OS doing this unless you terribly, terribly mess up this guide
Run the scripts and post your errors <- this will help me immensely to make this available on all Android Devices! please, thank you, and have fun!

N4melessS0ldier said:
Good news for this guide:
I've done it already so you just need to download the files and follow these simple instructions:
0) make sure your SGS4G is rooted (added so I get less nonsensical "It doesn't work!!!!!" and more "I followed everything I get an <insert error here> error! HELP!"
1) download files from http://anonymouslyacquired.info/fedoraonsgs4g/
2) place all three files in /sdcard/fedora/
3) open android terminal emulator
4) run command "su" (you might have to press allow in the Superuser App)
5) run command "sh /sdcard/fedora/fedora.sh"
6) run command "bootfedora" If that returns "not found" run "sh /sdcard/fedora/bootfedora"
7) now you're in fedora (should now see [[email protected] /]#)
8) run "startvnc" (my automated vncserver script)
AND/OR
9) run "service sshd start"
If you want to see your newly installed Fedora 12 OS:
android-vnc-client to localhost:5901 with password = password
P.S.: I set the root password to password
P.S.S.: I'm pretty sure it's impossible to screw up your Android OS doing this unless you teriibly, terribly mess up this guide
P.S.S.S: I'm running a rooted Bionix Frost SGS4G ROM with Bali KERNEL (don't think that matters but I do know being rooted matters!)
edit: apparently this isn't working for anyone but myself so far sooooo:
To Moderators: You may delete this thread and move the thread in Galaxy S 4G General: [Guide] Installing Fedora 12 on SGS4G to Galaxy S 4G Android Development (I only posted in General because I didn't have permissions to post here yet and posting here (I hope) will increase my ability to make this available to all SGS4G owners!)
Click to expand...
Click to collapse
forgive me for asking because im usually one to read to learn, but since you made this
what BENEFITS are gained from fedora?
i just dont know exactly what it is? thank you

I suppose mainly for developing. If you have fedora installed on a phone with a kernel that supports adding kernel modules and the kernel headers then you can build new modules for your phone on your phone. Also, it's sortof fun to show off, and it can potentially do some neat things (potentially aircrack-ng if it supports the WiFi device - maybe unlocking some features by allowing you to add linux tools and binaries - adding new media players - converting different media files to things accessible by Android Apps (or just playing them from Fedora) - extracting weird archives - and I'm sure if you take them time you can probably think of cool things you can do with an extremely portable, extremely customizable Linux Operating System Distribution (whether "legit" or less than))
edit: also, most things are already precompiled on a Fedora 12 ARM repo but if they aren't you can easily compile them from your phone (I suggest plugging it in and compiling/installing so you don't waste battery life (also I suggest doing that from your computer to your phone through SSH for easier typing, quicker command entering, etc.) and it may take some time depending on how overclocked the phone is)

Thanks for the explanation brotha!
sent from my sgs4g 2.3.3, finally

So I would be able to modify the frameworkres.apk and other things of that nature?
Sent from my SGH-T959V using XDA Premium App

I got it!
http://forum.xda-developers.com/showpost.php?p=8755526&postcount=7
If bootubuntu gets executed before Android loads all app2sd applications, it is possible solves the loop device busy error even with App2SD applications installed. It requires a very perfect timing, today after few experiments on my phone, I worked out a process which can always boot up Ubuntu on my phone:
1. Reboot phone
2. as soon as you enter lock screen, unlock screen
3. quickly go to terminal emulator
4. become su by typing su and enter
5. type bootubuntu and wait (type it fast... practice )
Click to expand...
Click to collapse
So apparently it's apps2sd causing this problem. I used the ubuntu guide but I'm sure fedora will work now, since it was just a mounting issue.
What I did to type this quickly was change the bootubuntu (or bootfedora in this case) script to just b so i could just do su, press enter, then b, press enter
EDIT
This means that it's possible to boot it as an init.d script to make sure it loads before the phone is done scanning the SD card. I think I'll wind up doing that... It's easier to kill the script when you don't need it than boot it when you want it.

Oh gosh, thank you so much I was just about to give up on public releases. Now that I know the problem I can fix my scripts to get arpund it. Thanks so much!
Sent from my SGH-T959V using XDA App

Just wanted to post again to express my gratitude I will definitely post a new script that will mount regardless of app2sd. Thank you! Thank you! Thank you!
Sent from my SGH-T959V using XDA App

Hey man I'm as happy as you are... Just spent the last few hours messing with ubuntu on the phone. Piece of work that is. You said fedora has sound support when booting on the phone?

Yeah I managed to get sound working.... sad part is my (granted I forgot to make a backup) version of the filesystem image became corrupt.... oops. Well, I'm buying a larger sd card in about 30 mins and I'm going to redo it so soon I'll upload the new img and scripts aswell as a kernel module for you and others using a different linux distro than fedora
Sent from my SGH-T959V using XDA App

Sounds great. Just a heads up, I was messing with the bootscript and I added the lines that mount the sdcard to the other OS's filesystem. Twice I got the phone freezing up so I did a hard reboot (battery pull) and when the phone rebooted it seems as if the /data partition got wiped (except for my background image which got saved, go figure). Weird, not even sure how that could've happened.

Very odd. If this forum has private messaging, PM me exactly what you added so I can make sure that or something more serious doesn't happen to others. Thanks
Sent from my SGH-T959V using XDA App

I just updated the script to mount whether or not you have App2SD installed on your phone.
It turns out App2SD uses a separate loop device for each app you have moved to your SD Card.
I've set the script "bootfedora" to create a "/dev/loop99"
So, unless you have 99 or more Apps moved to your SD Card it should work!
Re-download "bootfedora" from:
http://anonymouslyacquired.info/fedoraonsgs4g/
edit: currently working on new version of my Fedora 12 filesystem (should include a lot more (including working sound for a "nicer" feel) but it sucks if you have less than 2GB of freespace on your SD Card)

I'm completely in the dark when it comes to Fedora but I find it very interesting. It is going to be a Big Development for our phone I'm sure.
Wish I could help you but this is way out of my league.
I'm definitely following your progresses closely. Keep up the Great Work fellas!
Thanks

N4melessS0ldier said:
I just updated the script to mount whether or not you have App2SD installed on your phone.
It turns out App2SD uses a separate loop device for each app you have moved to your SD Card.
I've set the script "bootfedora" to create a "/dev/loop99"
So, unless you have 99 or more Apps moved to your SD Card it should work!
Re-download "bootfedora" from:
http://anonymouslyacquired.info/fedoraonsgs4g/
edit: currently working on new version of my Fedora 12 filesystem (should include a lot more (including working sound for a "nicer" feel) but it sucks if you have less than 2GB of freespace on your SD Card)
Click to expand...
Click to collapse
Alright man, I got it to boot perfectly without doing this at boot startup! Aww yeah, it's on!
One thing though, the scripts you've been posting lately have windows line endings insteads of Unix, so I had to convert them before they worked.

FBis251 said:
Alright man, I got it to boot perfectly without doing this at boot startup! Aww yeah, it's on!
One thing though, the scripts you've been posting lately have windows line endings insteads of Unix, so I had to convert them before they worked.
Click to expand...
Click to collapse
I'm not sure what I'm doing wrong but I keep getting the error
chroot: notfound
: not found
Shutting down Fedora
: not found

glt0404 said:
I'm not sure what I'm doing wrong but I keep getting the error
chroot: notfound
: not found
Shutting down Fedora
: not found
Click to expand...
Click to collapse
What rom/kernel are you using?

FBis251 said:
What rom/kernel are you using?
Click to expand...
Click to collapse
Stock rom with Bali 3.3UV
I'm pretty sure that's not the problem cause I've successfully booted Ubuntu (without gui).

Post up the whole list of commands you ran, plus the errors. Just copy the whole command line text

FBis251 said:
Post up the whole list of commands you ran, plus the errors. Just copy the whole command line text
Click to expand...
Click to collapse
This is what I got.
Code:
export PATH=/data/local/bin:$PATH
# #cd /sdcard/fedora/
# su
# sh fedora.sh
Usage: mount [-r] [-w] [-o options] [-t type] device directory
Usage: mount [-r] [-w] [-o options] [-t type] device directory
rm failed for -f, No such file or directory
: not found
: not found
: not found
: not found
: not found
: not found
Fedora Chroot Bootloader v0.1
Fedora Bootloader is now installed!
This process does NOT damage Android OS!
Original Installer by Charan Singh
Modified for Fedora Chroot by N4melessS0ldier
To enter the Fedora Linux console just type 'bootfedora'
: not found
: not found
# sh bootfedora
Usage: mount [-r] [-w] [-o options] [-t type] device directory
Usage: mount [-r] [-w] [-o options] [-t type] device directory
: No such file or directoryxtcard2
': Read-only file systemctory '/mnt/extcard2
'knod: invalid number '0
losetup: not found
failed: No such file or directory/extcard2
': No such file or directoryy '/mnt/extcard2/rootfs-f12
failed: No such file or directoryp1 on /mnt/extcard2/rootfs-f12
': No such file or directoryy '/mnt/extcard2/rootfs-f12
failed: No such file or directoryard2/rootfs-f12
': No such file or directoryrd2/rootfs-f12
': No such file or directoryrd2/rootfs-f12
failed: No such file or directoryrd2/rootfs-f12
failed: No such file or directoryxtcard2/rootfs-f12
failed: No such file or directoryrd2/rootfs-f12
failed: No such file or directoryrd2/rootfs-f12
Setting /etc/resolv.conf to Google Open DNS 8.8.8.8 and 8.8.4.4
: directory nonexistentte /mnt/extcard2/rootfs-f12
: directory nonexistentte /mnt/extcard2/rootfs-f12
Setting localhost on /etc/hosts
: directory nonexistentte /mnt/extcard2/rootfs-f12
Operation complete!
Courtesy N4melessS0ldier!
chroot: not found
: not found
Shutting down Fedora
: not found
#

[Q] Anyone have Linux/Ubuntu/Fedora Working Currently On GB?

Problem:
I've worked with every available distribution of Linux, trying to get the damn thing working on my phone. Troubleshooting the ***t out of it, and no deal. Constant errors/files not found etc. So, rather than post my logs and ask for help troubleshooting them (as I've obviously been unable to do), I thought I'd just ask:
Does anybody have a Linux build (besides android!) working on their phone that's running Gingerbread or ICS? If yes, can you post your software specs?
Here are mine currently:
Busybox- v1.19.3-Stericson in /system/xbin
Firmware Version- 2.3.5
Baseband Version- T959VUVKG6
Kernel- 2.6.35.7-T959VUVKI3-CL611444
Build Number- Gingerbread.VUVKI3
Mod Version- Octaine Team Acid
Thanks, this has been a pain in my **s for too long now!
S

I had both Fedora and Ubuntu working on Froyo at one point through lots of modifying and editing of the scripts.
What do you need them for anyway? I think it's more of a hassle to set them up than it's worth.

Well, I am working quite a bit now with linux for servers and such, and it's good to have a system (even minimal) that I can use/reference, plus it helps me get better at it.
Get this: I was so frustrated that I went back to BlackIce (keeping my gb bootloaders) and the damn thing loads right up, ubuntu 11.04, no problem. So, I then loaded up Valhalla's GB build and, sure enough, that works too. So, going with my luck I load octane 2.x GB which i've been digging of late and no deal, ubuntu just won't load.
Now, trying the same trick I cannot get it to work. It just won't load now when I SH it. Here's the instructions that worked before (and I've tried them all!):
http://www.nerd65536.com/2011/07/installing-ubuntu-in-android-version-2.html
Also, I hard bricked again (corrupted bootloaders from a Parallels Windows stallout) but did Adam's UnBrickable Mod and that's all better. Everybody needs to check it out, it's awesome:
http://forum.xda-developers.com/showthread.php?t=1333424
So FBI, any idea why linux is so temperamental? Once it SH's properly, it always works.
(Thanks to all the developers for their great roms!)

Yeah I noticed that slight changes from different ROMs based on the same kernel base had that effect too. I'm thinking it had to do something with the busybox installations since I had to edit the script sometimes. For some reason on some installs running mount won't work unless you use it as busybox mount. It was very iffy like that. I haven't even tried it again because of how frustrating it is to get even a boot. The other thing is that if you try to do a shutdown from ubutu/fedora it doesn't even kill the processes all the way so the only way you can clear some ram up with with a reboot.

Yeah man, I was figuring Busybox myself. I've tried old installs, new installs, xbin only, bin only, xbin & bin, etc. It's so frustrating because I can't figure it out. When it was working it was great, pretty stable.
So the first problem always lists as:
Remounting /system rw...
Mount: no such file or directory
Usage: mount [-r] [-w] etc, etc
So does this tell us that the system is not mounted rw? I used the Mount/system r/w application, but I cannot verify it's doing it's job. Everything is rooted properly, CWM also.
In Terminal on the phone I ran:
"mount | grep system"
which gave me
"/dev/block/st19 on /system type ext4 (rw,relatime,barrier=0,data=writeback)"
which leads me to believe the system is r/w.
I'm converting the system back from ext4 using CWM Voodoo to disable Lagfix and system Lagfix to see if this has any effect. Will report.

No deal. Didn't do a damn thing. I'm going to crack this if it's the last thing I do....
I'm using Better Terminal Pro, Bash shell, and under command line in options it lists the Shell as: /system/bin/sh-
The sh install.sh also tells me:
"Mounting: Loopback mount
mknod: /dev/block/loop254: File exists"
Does this mean that all (255) of my loops are used? Do I need to remove programs?

The available loop device thing never got resolved. Nameless originally fixed it by making it use 254 so that there was a low chance of the loop device being available, but the phone's OS is very iffy about letting a new loop device get assigned to a system image file. Can't really help you out since I never got it to consistently mount with different roms.

Linux on SGS4G Working! Done and Done!
Figured it out.
I can get Ubuntu 11.04, 11.10 & Debian 6 to mount repeatedly in all sorts of ui updatable configurations using this information:
http://www.nerd65536.com/2011/07/installing-ubuntu-in-android-version-2.html
It's a friggin Christmas Miracle! Can't tell you how much time I've wasted working this out, and it all boils down to the sh and run scripts.
So, without further ado, here goes.
!!Make sure you're rooted!!
!!The quotes just tell you what to type. Don't type them!!
1.
Download one of the three builds on the website listed above (or build your own, it should work fine). Extract it from tar.bz2, they should all extract to a linux file, this includes the necessary scripts. Put it on the sd-card on your phone.
2.
Download the new scripts that (Nerd) listed found here: http://ohm.nerd65536.com/android-linux/scripts-latest.tar.bz2
And extract them. You'll have another file that says linux. Open it, take the three files inside (install.sh, root-scripts & scripts) and paste them in the linux folder you moved to your sd-card. They will overwrite the ones currently there. These scripts work for sgs4g, the originals did not.
3.
Install the latest BusyBox in xbin if it's not already installed (must be rooted). Latest is 1.19.3
4.
Download a terminal client, like Better Terminal Emulator or Android Terminal Emulator. I use the first. The terminal needs to run the commands as root, especially the linux vnc command as it didn't want to work for me no matter if I started by typing su. Better Terminal Emulator has a check box to always start in root.
5.
Open up your terminal emulator and type su if you are not rooted there. Then change directory to the linux file on the sd-card. run the sh file there.
Like this:
"su"
"cd /sdcard/linux"
"sh install.sh"
If it works, the resulting dialog in terminal won't throw up any problems.
6.
Get back to / on sd by typing in terminal:
"cd /"
You should then have a: / # prompt, which means you are still rooted.
Enter:
"linux"
Which should result in a: [email protected]:/#
This means Linux is running. Congratulations. It should continue to run unless you shut down your phone.
7.
Download a VNC client, like Android VNC Viewer (free) or Remote VNC Pro, which I use. Add a new entry in it, with the following settings:
Host: localhost
Port: 5901
Password: cheesecake
Color: 24-bit
Name: Linux
When that's done save if you can or back out if you can't, and go back to your terminal emulator.
8.
It should still say: [email protected]:/#
If it doesn't, fine, if it does, just go back to root prompt by typing:
"exit"
Which should get you: / #. Then type:
"linux vnc"
Which should run itself and mount the chroot environment. It should tell you your new 'X' desktop is localhost:1, and have a: / # prompt again.
It might also ask you for a password, if so then put whatever password you'll remember in that's longer than 6 characters and verify it. This only happens once.
9.
Go back to your VNC client and if you entered a password in step 8. then edit your listing to your password instead of cheesecake, if not then don't.
Click on the Linux link and BAM! (shameless Emerilism), you're at your Linux desktop which should be running a iceWM desktop interface, which is fast. The LXDE desktop is nicer and if you want that then go into you're terminal and get into the linux shell by typing:
"linux"
And then switch to LXDE by typing:
"apt-get autoremove icewm- lxde+"
Which will run through the removal/ installation, and verify you want to download the <400mb files. Type:
"y"
And give it time to finish. When finished, just go back to your VNC client and hit Linux again, and you will have a nice looking functional desktop, with a cpu load graph on the bottom. I tried using Gnome desktop and Unity 2d, but both of these would install and not fully run with all options. They are heavier and slower, but cool non-the-less. Let me know if anyone has luck with these on Android.
Notes-
You only have to type "linux vnc" once in terminal to start linux every time you boot your phone. Otherwise, just open your VNC client and click on Linux to use it. Easy!
You will want to update and upgrade your linux after install, do so by typing in terminal:
"apt-get update"
"apt-get upgrade"
Also, you might run across a problem if you try to add-apt-repository, that's because that python command is not present. To use it, enable by typing:
"apt-get install python-software-properties"
Also of note, the downloadable linux builds are sized to about 2.15gig on your sd, which is big enough for most. There is a way to resize them which I tried but it gave me trouble in loading. I will try again and see if I can get it to work.
Here's the link from Dangermouse:
http://www.androidfanatic.com/community-forums.html?func=view&catid=9&id=1610
Thanks to Nerd65536 for the info, write-up and files. He fixed my problem.

sconsylman said:
Also of note, the downloadable linux builds are sized to about 2.15gig on your sd, which is big enough for most. There is a way to resize them which I tried but it gave me trouble in loading. I will try again and see if I can get it to work.
Here's the link from Dangermouse:
Click to expand...
Click to collapse
You're welcome.
It's actually a lot easier than that to make the image larger. Just pop the SD card into a Linux machine and:
(Assuming the original file is: /media/phone/linux/linux.img)
Code:
resize2fs /media/phone/linux/linux.img 4095M
And you're done. resize2fs is made of magic!
Note: Most SD cards are FAT32, which has a filesize limit of 4GiB. The above instructions will make the file a megabyte less than that.

nerd65536:
Thanks! Worked like a charm. Had to e2fsck -f /media/SDCARD/linux/linux.img (phone plugged in to Mint) before i did it to check over the file system, but then it ran immediately. Much appreciated.
Have you had any luck on native boot? I've been working a little on this, as I can't run BackTrack arm well virtually, it gets buggy. Granted the telephony systems won't work during, but the functionality should be pretty good if we could run it standard.

Also, while I'm thinking of it, is it possible to run the img from an ext4 partition on the card? I have an existing one being used for link2sd files and would much prefer using it as it's a far superior file system to fat32, without the 4G limits. Vnc should have no problem graphically, but would the linux.img chroot properly?

It would probably work but you would have to alter the script to mount the other partition if it doesn't do it automatically and change the path. Shouldn't be too hard.

I'm getting an error when I try running sh install.sh:
Code:
# sh install.sh
readlink: applet not found
Remounting /system rw ...
sh: Can't open /linux/scripts/fsrw
Installing scripts in /system/bin ...
cd: can't cd to /linux/scripts
cp: write error: No space left on device
cp: omitting directory 'root-scripts'
Unable to chmod /system/bin/root-scripts: No such file or directory
cp: omitting directory 'scripts'
Unable to chmod /system/bin/scripts: No such file or directory
cp: omitting directory 'tmp'
Unable to chmod /system/bin/tmp: No such file or directory
Mounting the Linux image ...
install.sh: /system/bin/linux: not found
Customizing the image ...
install.sh: cannot create /data/local/mnt/etc/resolv.conf: directory nonexistent
install.sh: cannot create /data/local/mnt/etc/resolv.conf: directory nonexistent
Installing root-scripts ...
mkdir failed for /data/local/mnt/root/scripts, No such file or directory
Unable to chmod /data/local/mnt/root/scripts: No such file or directory
cp: can't stat '/linux/root-scripts/*': No such file or directory
Unable to chmod /data/local/mnt/root/scripts/*: No such file or directory
Install finished
# linux
linux: not found

NuVanDibe said:
I'm getting an error when I try running sh install.sh:
Code:
# sh install.sh
readlink: applet not found
Remounting /system rw ...
sh: Can't open /linux/scripts/fsrw
Installing scripts in /system/bin ...
cd: can't cd to /linux/scripts
cp: write error: No space left on device
cp: omitting directory 'root-scripts'
Unable to chmod /system/bin/root-scripts: No such file or directory
cp: omitting directory 'scripts'
Unable to chmod /system/bin/scripts: No such file or directory
cp: omitting directory 'tmp'
Unable to chmod /system/bin/tmp: No such file or directory
Mounting the Linux image ...
install.sh: /system/bin/linux: not found
Customizing the image ...
install.sh: cannot create /data/local/mnt/etc/resolv.conf: directory nonexistent
install.sh: cannot create /data/local/mnt/etc/resolv.conf: directory nonexistent
Installing root-scripts ...
mkdir failed for /data/local/mnt/root/scripts, No such file or directory
Unable to chmod /data/local/mnt/root/scripts: No such file or directory
cp: can't stat '/linux/root-scripts/*': No such file or directory
Unable to chmod /data/local/mnt/root/scripts/*: No such file or directory
Install finished
# linux
linux: not found
Click to expand...
Click to collapse
cp: write-error.. no space left on device? You need more space dude