Hello there, I'm getting a problem linking my apps to sd-ext. I partitioned my sd-card. Mounted script (in link2sd I choosed sd-ext4 not sure if doing right). It told me to reboot. I did. Then when I tried to link my random picked pre-installed app
it showed and error i guess like 'read only file system' or something. No.idea how to fix it. Help needed.
Correct me if I'm doing wrong. Any reason why I'm facing this error. Or tell me your own steps.
Extra Info: using CM10 beta #3. But tried it on CM9 #11 and faced the same problem.
Thank you!
I promise I'll hit the 'Thanks' button.
No sorry I selected ext2. It shows error while mounting ext4 and FAT 16/32
U must be on stock rom !! Right?
As it dont have ext support! So make the secrond partition also as fat32 but logical! Then try and tell if it helps
Parth_14 said:
U must be on stock rom !! Right?
As it dont have ext support! So make the secrond partition also as fat32 but logical! Then try and tell if it helps
Click to expand...
Click to collapse
No No, I already mentioned I'm using CM 10 Beta #3. I can't link my apps via link2sd
Ohh sorry!!
Most people use link2sd on stock!! Anyways if u are on cm10 just download and flash m2sdnoconfig.zip from this thread and remember to reboot twice!! All internal memory problems gone
http://forum.xda-developers.com/showthread.php?p=32690721
Parth_14 said:
Ohh sorry!!
Most people use link2sd on stock!! Anyways if u are on cm10 just download and flash m2sdnoconfig.zip from this thread and remember to reboot twice!! All internal memory problems gone
http://forum.xda-developers.com/showthread.php?p=32690721
Click to expand...
Click to collapse
ahh sorry, how flashing this thing will sort out the problem. Please elaborate!
....
which recovery are you on...?????
"error linking ext partition " i this the error you get..????
developerindeed said:
ahh sorry, how flashing this thing will sort out the problem. Please elaborate!
Click to expand...
Click to collapse
How u are on cm 10 if u dont even know how to flash ??
bid4sumit said:
which recovery are you on...?????
"error linking ext partition " i this the error you get..????
Click to expand...
Click to collapse
CWM v5.0.X
No, the exact error I get is 'mkdir: /dalvic-cache read only file system'.
PS, tell me if there is any way to increase the internal memory by merging part of memory from sd-card.
Improve your vocabulary!
Parth_14 said:
How u are on cm 10 if u dont even know how to flash ??
Click to expand...
Click to collapse
Are you sick with English?
I asked how flashing that zip will help me? NOT How to flash
You got something?
developerindeed said:
Are you sick with English?
I asked how flashing that zip will help me? NOT How to flash
You got something?
Click to expand...
Click to collapse
Basically it makes ur ext partition as ur internal memory!! That is it will show that amount created by u for ext instead of 150mb! And all the apps automatically install in this partition!!
....
dude change ur recovery...switch to Yanoos recovery or twrp...
CMW has error mounting ext Partition.......
Parth_14 said:
Basically it makes ur ext partition as ur internal memory!! That is it will show that amount created by u for ext instead of 150mb! And all the apps automatically install in this partition!!
Click to expand...
Click to collapse
The method you told didn't work. Flashing any of the zip mounts2sd(or no config) made my phone stuck on HTC logo. Rebboting 2 times or implementing emulator commands are later things :/ Now tell what to do?
developerindeed said:
The method you told didn't work. Flashing any of the zip mounts2sd(or no config) made my phone stuck on HTC logo. Rebboting 2 times or implementing emulator commands are later things :/ Now tell what to do?
Click to expand...
Click to collapse
See my signature and follow that method it should work
__________________________________________
"lts not who u r inside, its wat u do that defines u..."
———–——————————————
--->make ur phone faster and more battery efficient
--->partition and link apps to sd?!?!?
--->cool 3d games for galaxy y (no root no lag)
sanny5 said:
See my signature and follow that method it should work
__________________________________________
"lts not who u r inside, its wat u do that defines u..."
———–——————————————
--->make ur phone faster and more battery efficient
--->partition and link apps to sd?!?!?
--->cool 3d games for galaxy y (no root no lag)
Click to expand...
Click to collapse
Thank you, but I know the process and followed it the same way. But when try to link apps, its shows error 'mkdir failed for /data/sdext2/dalvic-cache'(screenshot attached). I guess problem is somewhere with permissions.I tried to change them with oot Explorer and ES Explorer but they don't allow me. Any fixes now?
bid4sumit said:
dude change ur recovery...switch to Yanoos recovery or twrp...
CMW has error mounting ext Partition.......
Click to expand...
Click to collapse
You mean I should flash mounts2sd.zip using TWRP?
Would that really work?
developerindeed said:
You mean I should flash mounts2sd.zip using TWRP?
Would that really work?
Click to expand...
Click to collapse
You can always try
FACK! I just read out I can't run m2sd script on this build. My Bad!
Anyways, let me change it. Don't go anywhere. I still may need your help.
Parth_14 said:
U must be on stock rom !! Right?
As it dont have ext support! So make the secrond partition also as fat32 but logical! Then try and tell if it helps
Click to expand...
Click to collapse
Yep i totally agree with him
Try following him what he said
And yeah ext2 runs fine with stock i tested it no errors
Sent from my HTC Explorer using xda premium
saadahmeddar said:
Yep i totally agree with him
Try following him what he said
And yeah ext2 runs fine with stock i tested it no errors
Sent from my HTC Explorer using xda premium
Click to expand...
Click to collapse
Dafaq???
Stock doesent have ext support!!! Whos phone did u test in?? Alien's??
Related
I would like to use one of these two ROM without custom ROM, so I wonder you how to make A2SDGUI work on S5670XXKPQ or S5670XWKT2?
Maybe there is a replacement for A2SDGUI?
root the ROM and install App2SD GUI?
If u need you can extract the system rfs and build the rom which is pure stock and then add the apptosd via dsixda kitchen..
Feras.Rehman said:
If u need you can extract the system rfs and build the rom which is pure stock and then add the apptosd via dsixda kitchen..
Click to expand...
Click to collapse
There is a Dell-shuvit-kernel-KPQ v.1.1 OC 844 MHz. I do not know if he ext4 kernel?
Here, I have found.
http://forum.xda-developers.com/showthread.php?t=1427833
how to use the App2SD GUI
Download and install A2SD GUI.
Click on apps are on internal storage. It'll reboot and move apps to sd-ext.
lomash said:
Download and install A2SD GUI.
Click on apps are on internal storage. It'll reboot and move apps to sd-ext.
Click to expand...
Click to collapse
I did so and nothing.
have you made an sd-ext partition?
lomash said:
have you made an sd-ext partition?
Click to expand...
Click to collapse
Yes. I Used CWM.
it should've worked...
try link2SD?
lomash said:
it should've worked...
try link2SD?
Click to expand...
Click to collapse
I installed Link2SD and now what?
just run and follow the instructions.
lomash said:
just run and follow the instructions.
Click to expand...
Click to collapse
I followed the instructions, the system is restarted, and nothing.
idk... it worked for me...
lomash said:
idk... it worked for me...
Click to expand...
Click to collapse
I use Force2Sd and it is the same as Link2SD. I need that the application be on ext4.
i flashed pico with sense4 build7 but the roms does not works then i try to flash another rom but no rom is working the recovery is working and i am getting this error in recovery E:error in /cache/recovery/log(no space left on device) please help
Taha Haq said:
i flashed pico with sense4 build7 but the roms does not works then i try to flash another rom but no rom is working the recovery is working and i am getting this error in recovery E:error in /cache/recovery/log(no space left on device) please help
Click to expand...
Click to collapse
plz mension ua recovery, n 2nd partition..
shree alwaz said:
plz mension ua recovery, n 2nd partition..
Click to expand...
Click to collapse
thanks for your reply i have Yannou90's recovery and 1 gb EXT4 partition on 8 gb card
Taha Haq said:
thanks for your reply i have Yannou90's recovery and 1 gb EXT4 partition on 8 gb card
Click to expand...
Click to collapse
hmm.. jus make it to ext2.. then try to flash.. it ll work..
shree alwaz said:
hmm.. jus make it to ext2.. then try to flash.. it ll work..
Click to expand...
Click to collapse
Ok i will try then let you know...
shree alwaz said:
hmm.. jus make it to ext2.. then try to flash.. it ll work..
Click to expand...
Click to collapse
it does not work i think i burned my nand i read cute price thread but it requires to move some files in root directory and i am not getting in to the phone
Taha Haq said:
it does not work i think i burned my nand i read cute price thread but it requires to move some files in root directory and i am not getting in to the phone
Click to expand...
Click to collapse
Flash twrp recovery and in advance setting you will find file manager
Use it to copy aur move files
Or try using format everything and flashing new rom
Hit thanks if helped
Sent from my HTC Explorer A310e using xda app-developers app
nit_in said:
Flash twrp recovery and in advance setting you will find file manager
Use it to copy aur move files
Or try using format everything and flashing new rom
Hit thanks if helped
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply i already wiped and formated everything but it did not work i need to move a folder to system/xbin and to set permission to 755 to recover burnt nand but how can i set permission in twrp recovery?and how to enable root aceess for both Apps and ADB again thanks for your help
Hi All,
I had rooted my phone a long time back and to clear up some memory i factory reset it. Now i am stuck on the white screen with htc logo . Please tell me what to to . I have no backups as well , as i ended up formatting my memory card while trying to create a partition on it.
When i start the phone in recovery mode this is what i get (Pico CMW-Based Recovery v5.0.2)
Code:
***UNLOCKED***
PICO PVT SHIP S-ON RL
HBOOT - 1.00.0000
RADIO - 1.10.81.17
Sep 29 2011 , 14:22:22
HBOOT
<VOL UP > to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
Please help.
Thanks
http://forum.xda-developers.com/showthread.php?t=2189199 just flash stock zip from here, or flash some custom rom from development sections, next time, read rooting tutorial through the end, and don't do factory reset
works !
shortyoko said:
http://forum.xda-developers.com/showthread.php?t=2189199 just flash stock zip from here, or flash some custom rom from development sections, next time, read rooting tutorial through the end, and don't do factory reset
Click to expand...
Click to collapse
Yes Sir, will read it for sure
Thanks , your answer solved my problem
Now i plan to install the JaggyRom 4.0.3 on my HTC Explorer. Do you think its a good idea ?
I only have a 2GB SD Card , is there any requirement that i have to convert at least 1GB to ext partition before installing the ROM.
Any other things which you would suggest i take care of before proceeding ?
Thanks a lot
Give link to rom which you wan't to install.
Especially Jaggy 4.0.3 was GB with sense 3.5 I THINK, so you don't need 1gb ext, even 512 will do. If it's ICS with sense 4 you need 1gb ext.
My advice: Don't worry if first time it stucks on white htc screen, if this happens, just try wiping everything again and flash again.
And another thing you can download this http://www.mediafire.com/download.php?lim1od8qrjdbblp you flash it before you flash the rom, it wipes everything by it self, I'm not sure how it works with sense 4, but for every athor rom it's fine.
Hi,
sorry not allowed to post the links yet.
androidforums[dot]com/explorer-all-things-root/656605-rom-sense-jaggyrom-4-0-3-12-10-12-a[dot]
please edit the link
I think i shall try this one now, and once i get the knack of it , i'll buy myself a bigger memory card and try ICS
Please let me know if i should go forward with it.
Thanks for the help .
Uff ya, forgot about links restriction, with this one you don't need more than 512mb of ext. Just don't forget to flash 'wi-fi fix' after install and follow the instructions.
With this one you also can use the 'superwipe.zip' that I've posted in the previous post, instead of wiping everything manually, whichever suits you best.
Also if you wan't you can check out cm9, it's ICS and its stable, for it you don't need 1gb ext partition. Well that's it, have fun
shortyoko said:
Uff ya, forgot about links restriction, with this one you don't need more than 512mb of ext. Just don't forget to flash 'wi-fi fix' after install and follow the instructions.
With this one you also can use the 'superwipe.zip' that I've posted in the previous post, instead of wiping everything manually, whichever suits you best.
Also if you wan't you can check out cm9, it's ICS and its stable, for it you don't need 1gb ext partition. Well that's it, have fun
Click to expand...
Click to collapse
Thanks ,
i'll try the JaggyRom and tell you how it goes.
If you want to keep your Rom pure stock then flash the one by immortal_yash with ext support. It's smoother then jaggyrom 4.0.3 for me or you can flash cm9.1 build 14 . It's your choice so try and use the one which is best for you...
Sent from my HTC Explorer A310e using xda app-developers app
Hi,
I have installed the JaggyRom 4.0.3 as of now (will try ICS, next after a while) . What i wanted to know if what next can i do with my phone?
I had created a ext4 partition , but can't see it now. Should i install link2SD ?
Also can i overclock my mobile (rather should i do it ? ) and also can the internal memory be used as RAM
Sorry the questions are pretty novice but then i am one
Thanks for all the help.
Hi,
I have installed the ROM , it worked fine for a while , now it keeps restarting every few minutes ..
I have no clue what to do
Just following instructions , understanding nothing is killing me
AlbusDumbelodr said:
Hi,
I have installed the JaggyRom 4.0.3 as of now (will try ICS, next after a while) . What i wanted to know if what next can i do with my phone?
I had created a ext4 partition , but can't see it now. Should i install link2SD ?
Also can i overclock my mobile (rather should i do it ? ) and also can the internal memory be used as RAM
Sorry the questions are pretty novice but then i am one
Thanks for all the help.
Click to expand...
Click to collapse
1. Make ext3 partition
2. Do not overclock... you can /rather will cause permanent damage
3.you don't need to use internal memory as ram ~if you do, it may reduce life of SD card
AlbusDumbelodr said:
Hi,
I have installed the ROM , it worked fine for a while , now it keeps restarting every few minutes ..
I have no clue what to do
Just following instructions , understanding nothing is killing me
Click to expand...
Click to collapse
Go to recovery
Wipe cache and dalvik
Fix permissions
Reboot
Wait
cm9 htc a310e
ptcpayme said:
1. Make ext3 partition
2. Do not overclock... you can /rather will cause permanent damage
3.you don't need to use internal memory as ram ~if you do, it may reduce life of SD card
Go to recovery
Wipe cache and dalvik
Fix permissions
Reboot
Wait
cm9 htc a310e
Click to expand...
Click to collapse
Hi,
Thanks for the reply.
What i observed was that the phone started restarting after i had run the following command (to enable ext4 to be used as part of internal memory):
Code:
su
m2sd rmount enable
so i again ran
Code:
su
m2sd rmount disable
after which it stopped restarting. Any pointers what could be the reason for this ? I have a 2GB card, not sure which class , but since it came with the phone i believe it should be class 2 or class 4
Type in terminal emulatur 'm2sd status'
It will show what is enabled, answers will come.
And did you used superwipe.zip, or manually wiped everything. And normally it's better ext partition to be ext2 or ext3.
AlbusDumbelodr said:
Hi,
I have installed the ROM , it worked fine for a while , now it keeps restarting every few minutes ..
I have no clue what to do
Just following instructions , understanding nothing is killing me
Click to expand...
Click to collapse
Well have you removed the sd card while the phone was on?.....If thats the case then you may have to reflash the rom....
Also download roms from xda itself because it is posted by the original devs themselves and you get better support.
Consider using jaggy 4.1 by me....
http://forum.xda-developers.com/showthread.php?t=1930175
shortyoko said:
Type in terminal emulatur 'm2sd status'
It will show what is enabled, answers will come.
And did you used superwipe.zip, or manually wiped everything. And normally it's better ext partition to be ext2 or ext3.
Click to expand...
Click to collapse
This is what i get :
Status
----
* Mounts2SD [loaded]
- Apps [loaded]
- Data []
- Dalvik[loaded]
- CmDalvik[]
- Cache[]
- Swap []
- Rmount[]
Device info :
* SD-EXT device [/dev/block/mmcblk0p2]
* Swap device[]
Locations :
* Cache[]
I used superwipe.zip
What do you suggest i do next ?
Thanks.
abhinavthms said:
Well have you removed the sd card while the phone was on?.....If thats the case then you may have to reflash the rom....
Also download roms from xda itself because it is posted by the original devs themselves and you get better support.
Consider using jaggy 4.1 by me....
http://forum.xda-developers.com/showthread.php?t=1930175
Click to expand...
Click to collapse
No i did not.
After i ran this
Code:
m2sd rmount disable
the phone stopped restarting.
Okies , i'll try jaggy 4.1 ,
but are there any limitations of the memory card that i have to take care of ?
And will i loose the data again ?
Thanks.
Edit : Not sure if its releavant, but i can't connect to the memory card by using the "Disk Mode" from the mobile.
Can someone shed some light on the differences between JaggyRom and cm ??
AlbusDumbelodr said:
Hi,
I have installed the ROM , it worked fine for a while , now it keeps restarting every few minutes ..
I have no clue what to do
Just following instructions , understanding nothing is killing me
Click to expand...
Click to collapse
flash new recovery http://forum.xda-developers.com/showthread.php?t=2168725
i recommend the 1 above
try cyanogenmod 10 or 9 whatever you want
flash proper gapps
if you want to increase internal memory go here -> http://forum.xda-developers.com/showthread.php?t=1932874
------------------------------------------------------------------------------------------------------------------------------------------------------------
Dont forget to hit thanks !!!
The1sameer said:
flash new recovery http://forum.xda-developers.com/showthread.php?t=2168725
i recommend the 1 above
try cyanogenmod 10 or 9 whatever you want
flash proper gapps
if you want to increase internal memory go here -> http://forum.xda-developers.com/showthread.php?t=1932874
------------------------------------------------------------------------------------------------------------------------------------------------------------
Dont forget to hit thanks !!!
Click to expand...
Click to collapse
I am thinking of installing this (TWRP) :
http://forum.xda-developers.com/showthread.php?t=1911242
I am currently on CMW-Based Recovery v5.0.2
AlbusDumbelodr said:
I am thinking of installing this (TWRP) :
http://forum.xda-developers.com/showthread.php?t=1911242
I am currently on CMW-Based Recovery v5.0.2
Click to expand...
Click to collapse
Yeah even i m using twrp :thumbup:
----------------------------
There is a Thanks button
and
it is meant to be clicked
I apologize in advance if this is in the wrong section, feel free to move it if so. I have a Samsung Galaxy Prevail 2 that I would like to swap memory with (internal to external) so that there is more room on my phone for apps. I have tried a few programs from the play store, and so far I'm having no success. My phone is rooted, and has SU access. It's running android 4.1.2 (ICS?) and the model number is SPH-M840. ANY help on this matter would be GREATLY appreciated.This has been driving me crazy, and there has to be a way to do this with my phone...right? Thank you!
Use Link2SD
It works fine on all devices.
forum.xda-developers.com/showthread.php?t=2412319
Someone, Anyone...please, help!
Hi,
use this thread...
http://forum.xda-developers.com/showthread.php?t=1853669
this thread is not for your phone model but procedure is same....
you do not need to use their kernal which is given in thread... just install init.d support use this thread
http://forum.xda-developers.com/showthread.php?t=1933849
or for init.d support for your stock rom, run attached .zip file from recovery...
u can also get some addition info on
http://www.technodify.com/how-to-increase-internal-memory-and-ram/
naman4797 said:
Use Link2SD
It works fine on all devices.
forum.xda-developers.com/showthread.php?t=2412319
Click to expand...
Click to collapse
Like2SD was the first program I tried. When I go to move an app to the SD card, it tells me:
"app2sd is not supported by your device. Because your device has a primary external storage which is emulated from the internal storage."
I can link the files if I want, but doing that doesn't do much on saving space. Thanks!
rkk253755 said:
Hi,
use this thread...
http://forum.xda-developers.com/showthread.php?t=1853669
this thread is not for your phone model but procedure is same....
you do not need to use their kernal which is given in thread... just install init.d support use this thread
http://forum.xda-developers.com/showthread.php?t=1933849
or for init.d support for your stock rom, run attached .zip file from recovery...
u can also get some addition info on
http://www.technodify.com/how-to-increase-internal-memory-and-ram/
Click to expand...
Click to collapse
Thank you, I will give this a shot and let you know if it worked or not!
rkk253755 said:
Hi,
use this thread...
http://forum.xda-developers.com/showthread.php?t=1853669
this thread is not for your phone model but procedure is same....
you do not need to use their kernal which is given in thread... just install init.d support use this thread
http://forum.xda-developers.com/showthread.php?t=1933849
or for init.d support for your stock rom, run attached .zip file from recovery...
u can also get some addition info on
http://www.technodify.com/how-to-increase-internal-memory-and-ram/
Click to expand...
Click to collapse
Sorry, it did not work. I followed the instructions carefully, and I keep getting the same error that I cannot move apps to the sd card because my device doesn't support apps2sd because my external storage is emulated from internal storage. Thanks anyway, though
Someone, Anyone...please, help!
StraTTtheRippeR said:
Sorry, it did not work. I followed the instructions carefully, and I keep getting the same error that I cannot move apps to the sd card because my device doesn't support apps2sd because my external storage is emulated from internal storage. Thanks anyway, though
Click to expand...
Click to collapse
Hi,
just give one more shot...
repartition your sd card....
first check your kernal support swapping or not with swapper script....
if doesn't support, search for a kernal for your device which support swapping & follow the procedure... it must work...
-rkk
Assuming you have root, search the store for "FolderMount [ROOT]".
rkk253755 said:
Hi,
just give one more shot...
repartition your sd card....
first check your kernal support swapping or not with swapper script....
if doesn't support, search for a kernal for your device which support swapping & follow the procedure... it must work...
-rkk
Click to expand...
Click to collapse
Don't worry, I'm not giving up so easily...there HAS to be a way to do this with my phone. Maybe I should try using a different partition, like ext4 or ext3? I know ext2 is the one that is said to work the most, but it's obviously not working. Do you the partitions have to be set as "active" for this to work? Where can I find the kernal script? Thanks for the help!
StraTTtheRippeR said:
Don't worry, I'm not giving up so easily...there HAS to be a way to do this with my phone. Maybe I should try using a different partition, like ext4 or ext3? I know ext2 is the one that is said to work the most, but it's obviously not working. Do you the partitions have to be set as "active" for this to work? Where can I find the kernal script? Thanks for the help!
Click to expand...
Click to collapse
http://androidforums.com/rush-all-things-root/739747-mod-app-swap-external-sd-internal-mempry.html have you tried this technique while I look it over?
Sent from my Nexus 7 using Tapatalk
InkSlinger420 said:
http://androidforums.com/rush-all-things-root/739747-mod-app-swap-external-sd-internal-mempry.html have you tried this technique while I look it over?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Actually, that was the very first one I tried. I followed the instructions exactly and still no luck. That program doesn't really give clear directions on how you're supposed to use it. I tried a few other methods from this message board and still nothing...
rkk253755 said:
Hi,
just give one more shot...
repartition your sd card....
first check your kernal support swapping or not with swapper script....
if doesn't support, search for a kernal for your device which support swapping & follow the procedure... it must work...
-rkk
Click to expand...
Click to collapse
Where can I find the swapper script to see if my kernel has swap support?
InkSlinger420 said:
http://androidforums.com/rush-all-things-root/739747-mod-app-swap-external-sd-internal-mempry.html have you tried this technique while I look it over?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
What's strange about using that method, is when I swap, my memory card changes to 1.96 GB (which is what the internal normally is) but the internal stays at 1.96 GB. So than I have both of my memory, internal and external at 1.96 GB and I have to to uninstall the program and reset my phone for the external to go back to 7.96 GB which is the size of the card I have. It's a scandisk card...do you think that makes a difference?
StraTTtheRippeR said:
What's strange about using that method, is when I swap, my memory card changes to 1.96 GB (which is what the internal normally is) but the internal stays at 1.96 GB. So than I have both of my memory, internal and external at 1.96 GB and I have to to uninstall the program and reset my phone for the external to go back to 7.96 GB which is the size of the card I have. It's a scandisk card...do you think that makes a difference?
Click to expand...
Click to collapse
Then it is detecting the wrong partition..
Sent from my Nexus 7 using Tapatalk
InkSlinger420 said:
Then it is detecting the wrong partition..
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
That's what I thought. Any luck with that file I gave you?
I enjoy the same hell also need help.
Link2sd does almost nothing
About ready to return this thing.
Ps app2sd does work for applications over 1gb according to Samsung
Also wil never buy another Samsung phobe since both yhis and the intercept both lscked app2sd
Sent from my SPH-M840 using xda app-developers app
I've been trying all the afternoon to do an partition on my 32gb SD card (class 4), but when I try to enable it with Link2SD, the phone stucks on reboot I have done the SD partition with ''MiniTool Partition Wizard Home Edition''. I'm on latest 15.3.A.1.14
1. FAT32 - PRIMARY - 27gb
2. Ext2 - PRIMARY - 2.5gb (I also try with Ext 2 and Ext 4).
I tried both also with LOGICAL or LOGICAL and PRIMARY and so on, but still don't work. Any solutions?
Sorry for bad english...
Check out the solution in this post: http://forum.xda-developers.com/xpe...ll-link2sd-xperia-l-rom-t2752119/post52749089
Try with CWM
siankatabg said:
Try with CWM
Click to expand...
Click to collapse
How I do it?
I mean, how do I installed?
NothingLikeUs98 said:
How I do it?
I mean, how do I installed?
Click to expand...
Click to collapse
CWM is recovery in our case its buildin kernel.So you will need to flash custom kernel(unlocked BL).But im not sure that partitioning from there will help you
Maybe problem is in root or script...
siankatabg said:
CWM is recovery in our case its buildin kernel.So you will need to flash custom kernel(unlocked BL).But im not sure that partitioning from there will help you
Maybe problem is in root or script...
Click to expand...
Click to collapse
Yeah, I know...but I think I can't installed because BL is locked
In my previous Samsung Galaxy Mini, I partitionate the SD card from there and it work. I think it was on stock kernel, but I'm not sure...
What do you mean by saying thay is a root or script problem?
NothingLikeUs98 said:
Yeah, I know...but I think I can't installed because BL is locked
In my previous Samsung Galaxy Mini, I partitionate the SD card from there and it work. I think it was on stock kernel, but I'm not sure...
What do you mean by saying thay is a root or script problem?
Click to expand...
Click to collapse
Maybe Link2SD don't get root permissions right or just the program isn't compatible with our phone...I'm not using this program(and never used it),so can't tell you much
siankatabg said:
Maybe Link2SD don't get root permissions right or just the program isn't compatible with our phone...I'm not using this program(and never used it),so can't tell you much
Click to expand...
Click to collapse
I'll try sending an email to the developer, asking for the problem...
But in fact, short time ago I read that some Xperia's like M, L and SP and so on have that problem. They said that was a 4.1.2 error, but apparently it remains in 4.2.2 and in 4.3