Database Info

[Q] Please Help

Intially im on Jellybam custom rom and wanna go back to stock rom so i went into recovery mode and flashed stock rom, everything went smoot and When im wiping the data/factory reset in recovery mode my mobile showing like below :-
--Wiping data...
Formatting/data...
Formatting/dbdata...
E:format_volume:rfs format failed on /dev/block/st110
Formatting/cache...
Data wipe complete.
But whats the problem is it is getting stuck at samsung logo and again it restarting it n getting stuck at same point....Plz help me

Natti said:
Intially im on Jellybam custom rom and wanna go back to stock rom so i went into recovery mode and flashed stock rom, everything went smoot and When im wiping the data/factory reset in recovery mode my mobile showing like below :-
--Wiping data...
Formatting/data...
Formatting/dbdata...
E:format_volume:rfs format failed on /dev/block/st110
Formatting/cache...
Data wipe complete.
But whats the problem is it is getting stuck at samsung logo and again it restarting it n getting stuck at same point....Plz help me
Click to expand...
Click to collapse
you can not direct flash back to stock version you choose.
due to your partition converted to ext4 odin will flash with error
1st get xxkpe and flash with odin than flash others you like stock version.

Thanks
chongns said:
you can not direct flash back to stock version you choose.
due to your partition converted to ext4 odin will flash with error
1st get xxkpe and flash with odin than flash others you like stock version.
Click to expand...
Click to collapse
Sir, really thank you very much...now my mobile is working

You're welcome.
Keep the xxkpe safe. U need it if u r still trying custom ROM.
Sent from my GT-I9003 using Tapatalk 2

sure
chongns said:
You're welcome.
Keep the xxkpe safe. U need it if u r still trying custom ROM.
Sent from my GT-I9003 using Tapatalk 2
Click to expand...
Click to collapse
Yeah sure sir...will keep it. Thanx again

[Q] After Flushing PA Jelly Bean Rom It Keep showing PA boot screen

Hi,
I have AT&T Motorola Atrix 2 MB-865 , i was on official ICS after root unlock I flushed pa_edison-3.69-20130729-nokex.zip rom to my atrix 2, using http://forum.xda-developers.com/showthread.php?t=2050705
i did factory reset, data format system, format cache and etc before flushing that ROM after successful flush , I rebooted , after reboot it keep stuck (does't not hang just stuck) on paranoid boot screen, i tried to flush again but same result in addition i want to say i flushed only rom , no gapps, , now i am again on ics_edison using RDS Lite ,Please any one tell me where i am wrong
Thanks in advance.

cheeta123 said:
Hi,
I have AT&T Motorola Atrix 2 MB-865 , i was on official ICS after root unlock I flushed pa_edison-3.69-20130729-nokex.zip rom to my atrix 2, using http://forum.xda-developers.com/showthread.php?t=2050705
i did factory reset, data format system, format cache and etc before flushing that ROM after successful flush , I rebooted , after reboot it keep stuck (does't not hang just stuck) on paranoid boot screen, i tried to flush again but same result in addition i want to say i flushed only rom , no gapps, , now i am again on ics_edison using RDS Lite ,Please any one tell me where i am wrong
Thanks in advance.
Click to expand...
Click to collapse
Firstly its FLASH not FLUSH.!! On which system did you flash the ROM.. If you have flashed on 2nd system you should not wipe data... It will wipe out your other partitions... And did you flash via bmm or cwm??
Sent from my MB865 using XDA Premium HD app

nikhJ said:
Firstly its FLASH not FLUSH.!! On which system did you flash the ROM.. If you have flashed on 2nd system you should not wipe data... It will wipe out your other partitions... And did you flash via bmm or cwm??
Sent from my MB865 using XDA Premium HD app
Click to expand...
Click to collapse
he's is in a habit of writing 'flush' in place of 'flash' (see his other posts)
sent from my A2 running ÑÜMÅ3.0
$ÇÏÊÑÇÈ is the only TRUTH

Re
nikhJ said:
Firstly its FLASH not FLUSH.!! On which system did you flash the ROM.. If you have flashed on 2nd system you should not wipe data... It will wipe out your other partitions... And did you flash via bmm or cwm??
Sent from my MB865 using XDA Premium HD app
Click to expand...
Click to collapse
I used Atrix2BootStrap.apk which seem like CWM based, there was no option 1st system or second system, it was like standard flashing(means normally we flash using Clock world recovery so no 1s or seccond system option appeared).

cheeta123 said:
I used Atrix2BootStrap.apk which seem like CWM based, there was no option 1st system or second system, it was like standard flashing(means normally we flash using Clock world recovery so no 1s or seccond system option appeared).
Click to expand...
Click to collapse
i think this rom can be install via BMM only... my friend has do like what you do before..... the only you can do is FXZ to stock,root,and then go to play store, install BMM 0.3..... dont install bootstrap.apk again after installing BMM and you will be fine...

I seem to have a similar issue.
First of all although this is my first post on XDA I'm not new to flashing and using Custom Roms infact I have been using CM 10.1 versions switching back and forth between 4.1.2 when I run into trouble.
I decided to give PA a shot and seem to have run into a wall. I flashed PA nokex on system 3 (which previously had CM10.1 - JBX 0.8.1(kernel)).
Before flashing PA on it I destroyed and recreated system, data and cache partitions so I didn't see the need to do wipes on them again. Nevertheless I did dod wipes. Flashed PA nokex, Gapps, wiped dlavik cache and rebooted. (Using BMM ofcourse)
I am stuck at a black screen with the red LED. I would really like to sample PA so any help would be really appreciated.

blazebud350 said:
I seem to have a similar issue.
First of all although this is my first post on XDA I'm not new to flashing and using Custom Roms infact I have been using CM 10.1 versions switching back and forth between 4.1.2 when I run into trouble.
I decided to give PA a shot and seem to have run into a wall. I flashed PA nokex on system 3 (which previously had CM10.1 - JBX 0.8.1(kernel)).
Before flashing PA on it I destroyed and recreated system, data and cache partitions so I didn't see the need to do wipes on them again. Nevertheless I did dod wipes. Flashed PA nokex, Gapps, wiped dlavik cache and rebooted. (Using BMM ofcourse)
I am stuck at a black screen with the red LED. I would really like to sample PA so any help would be really appreciated.
Click to expand...
Click to collapse
i think PA non kexec is for ICS base only!
¢@®bøÑ///JBX

Super_Commando said:
i think PA non kexec is for ICS base only!
¢@®bøÑ///JBX
Click to expand...
Click to collapse
Yeah. I flashed the kexec version and it booted up fine... Thank you.

[Q] Fixing A Messed Up Flash

So I flashed a custom ROM and did the usual steps. Install, wipe caches, etc., and the ROM itself loads. It's a custom 4.4.2 ROM for GT-P31XX and I used CWM 6.0.4.5 recovery to flash it. Problem is that when I boot, I get to the lock screen but System UI, Settings, and AOSP Keyboard always fail. I can't seem to boot into recovery any more but I want to install a different ROM or reinstall stock JB and start over. How would I go about fixing this situation?

Okay, I can boot into recovery actually.

KingMotion said:
Okay, I can boot into recovery actually.
Click to expand...
Click to collapse
Did you wipe everything first then install? Because you want to wipe, install, boot. Cache, dalvik, data, system are the main ones, always wipe these when flashing a new ROM.
Sent from my GT-P5110 using XDA Premium 4 mobile app

Cant flash any rom or using odin. Always stuck in boot animation

Hi Guys, Im on 4.1.2. Revently i flash a 4.3 mod 4 rom via odin(this rom dont update bootloader) and stuck in boot animation. Then i re flash a 4.1.2 stock rom via odin.. but didnt boot.. then i tick erase nand all.. and then flash again 4.1 then some how i manage to reboot phone. But unfortunatly efs was missing and sent to repair.. now my phone works and have imei
That was background and i dont know it awas impact for this or not. After i recive my phone i got nand backup and now when ever i flash rom via recovery or odin always stuck in the boot animation(AOSP and stock) even tried to wipe data after flashing . At onece phone got boot as normal after flashing 4.1.2 stock and again there was no Imei.. tried everthing at efs pro and xda other thread information no use.. so i revert back to nandroid backup and everything works again. So guys im stuck in 4.1.2
, befor this happen i was able to flash galaxy project 4.3 , xtream 4.3 and and all other roms without problem.. and now i cant flash anything always stuck in boot animation and cant do anthing.. tried evrything full wipes and after flashing data wipes etc.. but no use.. even i cant flash odian stock roms.. it always stuck in bootanimation...im stuck to this nandroid backup please guys help me. I want to flash roms as i was before..
Sent from my GT-I9305 using xda app-developers app

Reboot to recovery, Wipe cache.

I did it no use...

What about sending it for repair again, then when it comes back do a nandroid restore of your data only (not system and other partitions), see whether that works.
Off topic: This should be in Q&A?
Sent from my GT-I9305 using Tapatalk

Oha im sry I got crzy because to this prob ill re write thread in q and a.
Sent from my GT-I9305 using xda app-developers app

Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo
Also tried customs 4.3 roms stuck a boot logo
Here what flashed philz recovery + 4.1.2 rom
no imei
flashed persues kenerl network + imei back
Backed up everything
Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
in mount and storage section formated everything
Used odin to flash a 4.3 stock package it worked

AMoizK said:
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo
Also tried customs 4.3 roms stuck a boot logo
Here what flashed philz recovery + 4.1.2 rom
no imei
flashed persues kenerl network + imei back
Backed up everything
Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
in mount and storage section formated everything
Used odin to flash a 4.3 stock package it worked
Click to expand...
Click to collapse
Well I try this.. I was so upset because of this problem.. ill check and tell you mate.. did u also wipe internal sd ?
Sent from my GT-I9305 using xda app-developers app

AMoizK said:
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo
Also tried customs 4.3 roms stuck a boot logo
Here what flashed philz recovery + 4.1.2 rom
no imei
flashed persues kenerl network + imei back
Backed up everything
Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
in mount and storage section formated everything
Used odin to flash a 4.3 stock package it worked
Click to expand...
Click to collapse
Man you are a hero thank you very much... now my phone working.... love you man....
Sent from my GT-I9305 using xda app-developers app

1Ishara said:
Man you are a hero thank you very much... now my phone working.... love you man....
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Took me a more then a month to solve this

AMoizK said:
Took me a more then a month to solve this
Click to expand...
Click to collapse
Yes bro I was very upset and I gave up every hope.. I thougt Ill stuck in 4.1... but you save me... thanks bro thanks lot... no words to say...
Sent from my GT-I9305 using xda app-developers app

Can't get TouchWiz to work

hi i've tried like 3 time to install this rom, flashed with odin to factory rom, then did all the instructions to install TW and all the installation goes well, but when i go ahead and reboot, it just stays at the samsung galaxy ace GT-s5830M screen.
i'm installing [ROM][CM9]Touchwiz Revolutionized 5.0-V4.0 [FINAL] [UPDATE][12.12.2013] on my Galaxy Ace GT-S5830M
pls help i really want to install this.

really no1?

Have u dirty wiped the last ROM? Dirty wipe means flashing another ROM without wiping anything
Sent from my HM NOTE 1LTE using XDA Free mobile app

This rom is CM9 based, so try to flash it through a custom recovery.. don't forget to wipe

ElitePanther said:
really no1?
Click to expand...
Click to collapse
No, you are No.2, lol

Cm9 its an custom ROM which can be flashed by custom recovery(cwm,philz,twrp)(I recommend philz and twrp).. first flash custom recovery by Odin and goto custom recovery and wipe cache,dalvik cache and wipe for installing full ROM, and select the ROM package zip and let to install, after flashing successfully , reboot your phone... it will boot with an boot animation of cm9