So I flashed a custom ROM and did the usual steps. Install, wipe caches, etc., and the ROM itself loads. It's a custom 4.4.2 ROM for GT-P31XX and I used CWM 6.0.4.5 recovery to flash it. Problem is that when I boot, I get to the lock screen but System UI, Settings, and AOSP Keyboard always fail. I can't seem to boot into recovery any more but I want to install a different ROM or reinstall stock JB and start over. How would I go about fixing this situation?
Okay, I can boot into recovery actually.
KingMotion said:
Okay, I can boot into recovery actually.
Click to expand...
Click to collapse
Did you wipe everything first then install? Because you want to wipe, install, boot. Cache, dalvik, data, system are the main ones, always wipe these when flashing a new ROM.
Sent from my GT-P5110 using XDA Premium 4 mobile app
Related
Hey everyone,
I'm a new-by to the tech world. I have a "google nexus s" running on ICS 4.0.4, I recently rooted my phone, flashed clockworkmod recovery and tried to install CM9 on my device. After the installation was completed through the clockworkmod, the boot image had showen up and continued to boot throughout the night and never showed up the home screen nor did the custom ROM open itself.
Can anyone give me a lil help as to about what this problem is or the reason why this is happening?
Any help would be really appreciated.
Thanx!
Did you do a full wipe and cache wipe? My suggestion is to do that and reinstall. You could also try a different ROM.
But wouldnt I loose my phone data if I do that?
Sent from my Nexus S using xda premium
i'm having the same problem for every ROM i try on my phone! what to do?
You have a bootloop, this appears because of kernel (boot.img) problems and/or inconsistent cache.
Please wipe/erase cache and Dalvik cache (this can be found in the Advanced menu). Wiping cache partition and Dalvik cache won't erase your personal data.
Make sure the previously flashed CM zip contained a boot.img file. If not, please flash a proper/recommended boot.img (kernel; which is in a zip file) or another rom (with boot.img).
When you flash a new rom over your stock.. first make a backup, then you need to wipe data, cache and dalvik cache..
Sent from my Nexus S using XDA app
Got a backup and mods are running cool! Thanx for the help!
Sent from my Nexus S using xda premium
Ok, I did a system wipe, cleared the dalvik and cache, rebooted to fastboot flashed the stable cm10 rom, went back into recovery and flashed rom and flashed gapps. cleared cache and dalvik and rebooted. Everything works fine but i keep getting a warning that states "Unfortunately Android(AOSP) keyboard has stopped. Would Gapps have anything to do with this?
RC196 said:
Ok, I did a system wipe, cleared the dalvik and cache, rebooted to fastboot flashed the stable cm10 rom, went back into recovery and flashed rom and flashed gapps. cleared cache and dalvik and rebooted. Everything works fine but i keep getting a warning that states "Unfortunately Android(AOSP) keyboard has stopped. Would Gapps have anything to do with this?
Click to expand...
Click to collapse
What hboot are you on bro? If its the latest, you need to flash the boot img FIRST. Then go and wipe all cache types, system and factory reset. Then flash CM.
Sent from my One X using xda premium
ToxicWaste said:
What hboot are you on bro? If its the latest, you need to flash the boot img FIRST. Then go and wipe all cache types, system and factory reset. Then flash CM.
Sent from my One X using xda premium
Click to expand...
Click to collapse
I did all that. Sorry didn't provide all of it in details. I guess its becaue of Gapps 4.2. I'm flashing an older version of gapps.
Yep that was the problem. I wiped everything and reflashed rom and older version of Gapps and problem solved.
Hi,
I have AT&T Motorola Atrix 2 MB-865 , i was on official ICS after root unlock I flushed pa_edison-3.69-20130729-nokex.zip rom to my atrix 2, using http://forum.xda-developers.com/showthread.php?t=2050705
i did factory reset, data format system, format cache and etc before flushing that ROM after successful flush , I rebooted , after reboot it keep stuck (does't not hang just stuck) on paranoid boot screen, i tried to flush again but same result in addition i want to say i flushed only rom , no gapps, , now i am again on ics_edison using RDS Lite ,Please any one tell me where i am wrong
Thanks in advance.
cheeta123 said:
Hi,
I have AT&T Motorola Atrix 2 MB-865 , i was on official ICS after root unlock I flushed pa_edison-3.69-20130729-nokex.zip rom to my atrix 2, using http://forum.xda-developers.com/showthread.php?t=2050705
i did factory reset, data format system, format cache and etc before flushing that ROM after successful flush , I rebooted , after reboot it keep stuck (does't not hang just stuck) on paranoid boot screen, i tried to flush again but same result in addition i want to say i flushed only rom , no gapps, , now i am again on ics_edison using RDS Lite ,Please any one tell me where i am wrong
Thanks in advance.
Click to expand...
Click to collapse
Firstly its FLASH not FLUSH.!! On which system did you flash the ROM.. If you have flashed on 2nd system you should not wipe data... It will wipe out your other partitions... And did you flash via bmm or cwm??
Sent from my MB865 using XDA Premium HD app
nikhJ said:
Firstly its FLASH not FLUSH.!! On which system did you flash the ROM.. If you have flashed on 2nd system you should not wipe data... It will wipe out your other partitions... And did you flash via bmm or cwm??
Sent from my MB865 using XDA Premium HD app
Click to expand...
Click to collapse
he's is in a habit of writing 'flush' in place of 'flash' (see his other posts)
sent from my A2 running ÑÜMÅ3.0
$ÇÏÊÑÇÈ is the only TRUTH
Re
nikhJ said:
Firstly its FLASH not FLUSH.!! On which system did you flash the ROM.. If you have flashed on 2nd system you should not wipe data... It will wipe out your other partitions... And did you flash via bmm or cwm??
Sent from my MB865 using XDA Premium HD app
Click to expand...
Click to collapse
I used Atrix2BootStrap.apk which seem like CWM based, there was no option 1st system or second system, it was like standard flashing(means normally we flash using Clock world recovery so no 1s or seccond system option appeared).
cheeta123 said:
I used Atrix2BootStrap.apk which seem like CWM based, there was no option 1st system or second system, it was like standard flashing(means normally we flash using Clock world recovery so no 1s or seccond system option appeared).
Click to expand...
Click to collapse
i think this rom can be install via BMM only... my friend has do like what you do before..... the only you can do is FXZ to stock,root,and then go to play store, install BMM 0.3..... dont install bootstrap.apk again after installing BMM and you will be fine...
I seem to have a similar issue.
First of all although this is my first post on XDA I'm not new to flashing and using Custom Roms infact I have been using CM 10.1 versions switching back and forth between 4.1.2 when I run into trouble.
I decided to give PA a shot and seem to have run into a wall. I flashed PA nokex on system 3 (which previously had CM10.1 - JBX 0.8.1(kernel)).
Before flashing PA on it I destroyed and recreated system, data and cache partitions so I didn't see the need to do wipes on them again. Nevertheless I did dod wipes. Flashed PA nokex, Gapps, wiped dlavik cache and rebooted. (Using BMM ofcourse)
I am stuck at a black screen with the red LED. I would really like to sample PA so any help would be really appreciated.
blazebud350 said:
I seem to have a similar issue.
First of all although this is my first post on XDA I'm not new to flashing and using Custom Roms infact I have been using CM 10.1 versions switching back and forth between 4.1.2 when I run into trouble.
I decided to give PA a shot and seem to have run into a wall. I flashed PA nokex on system 3 (which previously had CM10.1 - JBX 0.8.1(kernel)).
Before flashing PA on it I destroyed and recreated system, data and cache partitions so I didn't see the need to do wipes on them again. Nevertheless I did dod wipes. Flashed PA nokex, Gapps, wiped dlavik cache and rebooted. (Using BMM ofcourse)
I am stuck at a black screen with the red LED. I would really like to sample PA so any help would be really appreciated.
Click to expand...
Click to collapse
i think PA non kexec is for ICS base only!
¢@®bøÑ///JBX
Super_Commando said:
i think PA non kexec is for ICS base only!
¢@®bøÑ///JBX
Click to expand...
Click to collapse
Yeah. I flashed the kexec version and it booted up fine... Thank you.
Hi Guys. As my title shows I can't flash any other rom other than the official CyanogenMod 9.1. I do a full wipe of data, cache , and Dalvik Cache before I try a flash and as soon as I reboot I go into a bootloop. Any help would be great.
Boot to bootloader and write down everything from that screen
Boot to recovery and write down what version
Also name ROM you tried
Sent from my Nexus 4 using XDA Premium 4 mobile app
[email protected] said:
Hi Guys. As my title shows I can't flash any other rom other than the official CyanogenMod 9.1. I do a full wipe of data, cache , and Dalvik Cache before I try a flash and as soon as I reboot I go into a bootloop. Any help would be great.
Click to expand...
Click to collapse
Be sure to flash the boot.img, I currently have KitKatDS and any other rom will black screen on start up without first flashing.
Good Luck, Conner.
If not boot.img, your recovery may be out of date. Have you tried using one of these?
CWM: http://www.rootfiles.org/pub/mirror/silverl/cwm6046.img
TWRP: http://www.rootfiles.org/pub/mirror/silverl/twrp2630.img
hi i've tried like 3 time to install this rom, flashed with odin to factory rom, then did all the instructions to install TW and all the installation goes well, but when i go ahead and reboot, it just stays at the samsung galaxy ace GT-s5830M screen.
i'm installing [ROM][CM9]Touchwiz Revolutionized 5.0-V4.0 [FINAL] [UPDATE][12.12.2013] on my Galaxy Ace GT-S5830M
pls help i really want to install this.
really no1?
Have u dirty wiped the last ROM? Dirty wipe means flashing another ROM without wiping anything
Sent from my HM NOTE 1LTE using XDA Free mobile app
This rom is CM9 based, so try to flash it through a custom recovery.. don't forget to wipe
ElitePanther said:
really no1?
Click to expand...
Click to collapse
No, you are No.2, lol
Cm9 its an custom ROM which can be flashed by custom recovery(cwm,philz,twrp)(I recommend philz and twrp).. first flash custom recovery by Odin and goto custom recovery and wipe cache,dalvik cache and wipe for installing full ROM, and select the ROM package zip and let to install, after flashing successfully , reboot your phone... it will boot with an boot animation of cm9