Hey everyone recently i noticed when i plug in my tablet in to my windows 7 machine and auto play menu pops up it has the device listed as gt-n8000, but when i go to my computer it has it listed as gt-8010. The actual model of the device is indeed a gt-n8010, anyone have a clue as to what is going on ?
ckavvouras said:
Hey everyone recently i noticed when i plug in my tablet in to my windows 7 machine and auto play menu pops up it has the device listed as gt-n8000, but when i go to my computer it has it listed as gt-8010. The actual model of the device is indeed a gt-n8010, anyone have a clue as to what is going on ?
Click to expand...
Click to collapse
Are you on a custom or stock ROM and Kernel?
As above check build prop and check Kies registry entries .
jje
No was using stock kernal and rom but as it turns out windows was just messed up for some reason, when I plugged it in to my gfs pc it registered the proper device. Thanks for all the help
Sent from my GT-N8010 using xda app-developers app
Related
Have tried to install mango update but and delayed the has been removed USB Drives
And then the device does not work-_-
rom tried to install .. But do not work-_-stop installation of rom at 11%
What is the solution??
Device is not working, but in a USB only
Device Type hd7
Asian
please help me !!
Didn't make a backup?
Sent from my SGH-i917 using XDA Windows Phone 7 App
munkeyphyst said:
Didn't make a backup?
Sent from my SGH-i917 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
I have a backup copy
But this is not a problem
Device is not working.!!
There are only (color display)
I can not install the ROM
When installing the Rom show (error 226)
Color display? Like a red screen?
Sent from my SGH-i917 using XDA Windows Phone 7 App
munkeyphyst said:
Color display? Like a red screen?
Sent from my SGH-i917 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Yes, color screen (red, green, blue, white)
I'll try to explain my problem again
first I tried to install mango update on my device
and than my phone jammed suddnly and I disconnect the phone from the PC to restart it, but I notice that the update page jammed too, like I didn't disconnct the phone from the PC, so I powerd the phone off and turned it on to use the color screen to add a new ROM, but each time I try to do that, my phone stop installation at 11% and than my phone restart itself, and now when I turn my phone on all what I see is the color screen, any solution could help please thank you for helping me out every time
I still don't know what state your phone is currently in. Is your phone currently in a functional state?
Sent from my SGH-i917 using XDA Windows Phone 7 App
munkeyphyst said:
I still don't know what state your phone is currently in. Is your phone currently in a functional state?
Sent from my SGH-i917 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
yeah it can fanction. see the attachments,
The HearT BreaK KiD said:
yeah it can fanction. see the attachments,
Click to expand...
Click to collapse
Oh, OK. That's the bootloader.
Well, what is the solution now?
???????????????????????????????
The HearT BreaK KiD said:
yeah it can fanction. see the attachments,
Click to expand...
Click to collapse
You probably have delete or messed up you usb driver....
Connect the phone to a use on the pc (at the back) with the original usb cable and go to PC Control PAnel and delete the any driver for the HD7.
Then remove the phone and reconnect ...If all ok then the phone will be recognized by the PC the correct way and you will be able to flash a rom
Hi guys,
i have Galaxy Tab 2 hard bricked. Can't turn it, nothing happens when trying to turn on or charge. Absolutely dead. It is dead after i've tried to enable swap on rooted device.
Please help me
Wat was ur last ROM stock or else?
Did u tried it to connect in download mode to PC?
Sent from my GT-P3100 using xda premium
Please be more brief.
What did you do?
What did you try?
When plugged in to a computer, does it recognize it?
Does ODIN recognize it?
And if all fails and you are ready to go hardmode:
https://www.youtube.com/watch?v=Ami4TQH3cmc
jyeshta001 said:
Wat was ur last ROM stock or else?
Did u tried it to connect in download mode to PC?
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
It was stock ROM. I've installed only cwm-root-gtab2a and GT-P5100_ClockworkMod-Recover - this files. And all was fine.
I can't turn it to download mode.
When i tried to connect to PC i hear sound like device attached and from 3-5sec I hear 'device unattached' sound. This device is 'TI board'
suka_narkot said:
It was stock ROM. I've installed only cwm-root-gtab2a and GT-P5100_ClockworkMod-Recover - this files. And all was fine.
I can't turn it to download mode.
When i tried to connect to PC i hear sound like device attached and from 3-5sec I hear 'device unattached' sound. This device is 'TI board'
Click to expand...
Click to collapse
Hay bro..... will u tell me wants ur model....?
I wanna help u coz I know wats da pain of bricking a android.....
Sent from my GT-P3100 using xda premium
My Galaxy Tab 2 is P5100. It is rooted and works fine until i've tried to tweak swap via Swapper 2.
After i've installed this app i've tried to tweak my device and reboot it. so my tab is turned off and i can't enable it.
I've installed drivers and saw 'omap 4430' device in Windows. It appears when i connect my tab via usb cable at hold power button.
Now u connect it to Odin ....did the Odin software recogniz or tab
If yess u can reflash the all things....
Sent from my GT-P3100 using xda premium
jyeshta001 said:
Now u connect it to Odin ....did the Odin software recogniz or tab
If yess u can reflash the all things....
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
It can't be turned on in recovery/download mode so it is not visible in ODIN.
suka_narkot said:
My Galaxy Tab 2 is P5100.
I've installed drivers and saw 'omap 4430' device in Windows. It appears when i connect my tab via usb cable at hold power button.
Click to expand...
Click to collapse
????
Sent from my GT-P3100 using xda premium
what happens when you put it on charge ? probably battery is zero
Hello, I had same symptoms with my p5100 and I can't repair it. look here http://forum.xda-developers.com/showthread.php?t=1908949
jyeshta001 said:
????
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Tab should be turned on in download mode for flash via ODIN. But I can't enable it in download mode.
What happens when i connect Table to PC - I can see 'OMAP 4430 USB device' in Windows device manager. But this device is not visible and not accessible with ODIN. Nothing happens with my tablet - display is blanc, no backlight, ... :crying:
rraaka said:
what happens when you put it on charge ? probably battery is zero
Click to expand...
Click to collapse
No, battery was full-charged.
And i've plugged to charger and hold it with connected charger for 5 hours tonight - nothing, it is dead
riff box is the only way
http://www.fonefunshop.co.uk/Unlocking/riff_box.htm
morteza.ghodsi said:
http://www.fonefunshop.co.uk/Unlocking/riff_box.htm
Click to expand...
Click to collapse
I don't see that it supports the ti omap4430.
Sent from my GT-P3113 using xda app-developers app
morteza.ghodsi said:
http://www.fonefunshop.co.uk/Unlocking/riff_box.htm
Click to expand...
Click to collapse
I've visited one month ago much service centers (which used riff, medusa box, etc... ) - nobody can repair my bricked p5100 (((
merka_zh said:
I've visited one month ago much service centers (which used riff, medusa box, etc... ) - nobody can repair my bricked p5100 (((
Click to expand...
Click to collapse
Did u have any idea if you are going to repair it by Samsung how much it will cost....?
suka_narkot said:
Tab should be turned on in download mode for flash via ODIN. But I can't enable it in download mode.
What happens when i connect Table to PC - I can see 'OMAP 4430 USB device' in Windows device manager. But this device is not visible and not accessible with ODIN. Nothing happens with my tablet - display is blanc, no backlight, ... :crying:
Click to expand...
Click to collapse
Unfortunately I'm sorry to say but when to get that omap message the tablet or phone IS in fact hard bricked and is not recoverable by anything here at xda. Samsung may be able to fix it but you are probably Better off just getting a new tab man because it'll cost just as much.
I know it's hard to hear that and it really sucks.
I almost bricked this tablet too and just had to give up on it for a while because it was so frustrating. I finally found the fix.
A couple months ago these guys were posting the wrong recoveries and root files and not labeling them correctly. So you have to be real careful with this stuff because s alot of them don't know what's going on.
Sent from my SGH-T889 using Tapatalk 2
adishakthi said:
Did u have any idea if you are going to repair it by Samsung how much it will cost....?
Click to expand...
Click to collapse
1. authorised Samsung center proposed me to change board for 350$
2. i have contacts with unofficial master and he proposed me to replace internal memory card - from broken Tablet for 150$
But I've been looking for another solution and when came to service for replace internal flash memory (2 weeks ago) - they didn't have it.
So I've put it on the shelf and bought another Tablet - it is not Samsung, it is repairable device )))
Plz delete.....
I feel like I posted in the wrong section, but upon plugging my LG phone into the computer and the little noise going on to know it's connected, I'm trying to unbrick it so I'm on the download mode on the phone and I go into the software I'm using to unbrick it and it won't show up when I want to select a COM, how come?
Sent from my EVO using xda app-developers app
do not understand you well .
Well like,theres a program for LG phones, it resets the phone to factory settings but the program won't recognize the phone...I see it in device manager but not anything else
The phone is stuck in download mode or something
Sent from my EVO using xda app-developers app
I don't know for sure, but if you have bricked it by trying to root or mod, I don't think the program from LG will help you. I'd search the forums and see if someone else has done the same thing and maybe posted steps to fix it.
Sent from my SPH-L720 using xda app-developers app
It sounds like you may not have the phone in the right mode, or perhaps you don't have the right driver for the usb serial device?
It's tough to provide more specific help without knowing more about what model phone you have, which software you are using, what steps you took to get the phone into "download" mode, etc.
are you getting an error something like "fail to connect to the mobile handset, please check COM port and connect in idle screen. Due to the multifunction, despite the idle screen it can be failed to connect" please check the drivers on your pc which operating system are you using is the pc detecting other devices in the same port.
can anyone please help me. suddenly my galaxy core cannot be usb connected to pc. it just happen. when i plug the cable on the phone it says its connected at MTP device but on the pc i think it shows as a modem and recognize as gt-i8262 but when i click it it says "you dont have permission to access this device" i ve spent 3 days scouring the web looking for a solution but nothing..im lost.. im on windows 8 and phone is on Monster$ B3. please someone tell me if there's a solution. attached pic of the error ..
I don't know if this would help, try uninstalling the drivers for galaxy core, then hook up the phone.
Your issue sounds like it's your pc's problem, you should also try hooking your phone up in someone else's pc, just to be sure it ain't your phone's fault.
Sent from my GT-I8262 using xda app-developers app
try installing kies to install correct drivers fr ur phone....
Sent from my GT-I8262 using XDA Premium 4 mobile app
did try
dje20 said:
I don't know if this would help, try uninstalling the drivers for galaxy core, then hook up the phone.
Your issue sounds like it's your pc's problem, you should also try hooking your phone up in someone else's pc, just to be sure it ain't your phone's fault.
Sent from my GT-I8262 using xda app-developers app
Click to expand...
Click to collapse
hi
i did try connecting stock Samsung phns of colleagues and even other android phns and all get connected well and mtp works.. my SG core and my Tab 2 10.1 on Sensonic hd both are giving this error. also i tried everything with the drivers and still the same..im so baffled by this issue...
tried
Akshay7273 said:
try installing kies to install correct drivers fr ur phone....
Sent from my GT-I8262 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
tried both..even different versions of kies and driver..still nothing...
can this be someting to do with CWM?
last option is to go back to stock rom and retry......
pheonixxdark said:
can anyone please help me. suddenly my galaxy core cannot be usb connected to pc. it just happen. when i plug the cable on the phone it says its connected at MTP device but on the pc i think it shows as a modem and recognize as gt-i8262 but when i click it it says "you dont have permission to access this device" i ve spent 3 days scouring the web looking for a solution but nothing..im lost.. im on windows 8 and phone is on Monster$ B3. please someone tell me if there's a solution. attached pic of the error ..
Click to expand...
Click to collapse
do you have on usb tethering then turn of it or go developer option in setting menu and unchek usb debugging if stll cant do factory reset your phone n try it again.
Best of luck.
if i helped you give a big thanks:thumbup:
Sent from my GT-I8262 using XDA Premium 4 mobile app
Maybe it's because your phone is password protected, try opening your password and go to home menu before returning to connect USB cable
Hi All,
I upgraded my Galaxy S Plus GT 19001 from Gingerbread to Kitkat. Everything seems to work fine except that, the device is not recognized once I connect it to my laptop. It does not show anything in the mobile and does not even show anything in PC and device manager. Enabled developer options, tried connecting, a message comes up for few seconds for device not recognized and then it disappears. No trace anywhere.
Checked several blogs and forums but no help.
What to do? Please help.. :crying::crying::crying:
I used to have this problem but a pc reboot always solved it temporarily. Try updating the drivers as well, you made a big jump from gingerbread to kk.
Art Vanderlay said:
I used to have this problem but a pc reboot always solved it temporarily. Try updating the drivers as well, you made a big jump from gingerbread to kk.
Click to expand...
Click to collapse
When you say drivers, which drivers do you mean? The device manager does not show any yellow triangle which can be updated. I am wondering what to be done...
JashobantaC said:
When you say drivers, which drivers do you mean? The device manager does not show any yellow triangle which can be updated. I am wondering what to be done...
Click to expand...
Click to collapse
Try downloading the latest Samsung drivers again and reinstalling them. Delete the old ones.
Seems most likely a driver related issue.I had a hard time recently connecting my Galaxy Grand running CM11 to a windows 8.1 laptop. Downloaded the samsung drivers and installed them.Worked fine after that.
Sent from my GT-I9082 using xda app-developers app