Database Info

HELP! Odin to T959VUVKAB

Ok, so I attempted to Odin back to the leaked stock KAB file using the leaked PIT for the Vibrant 4g.
Everything seemed to work fine on the Odin side of the house, but now my phone only boots into recovery. Any help.
I am using Odin 1.81
The PIT uploaded by krylon360
The leaked T959VUVKAB tar
I placed the TAR in the PDA section of Odin
Any help is greatly appreciated.

If your rooted you can adb push a launcher on it.
Sent From My Galaxy S 4G

MvP77 said:
If your rooted you can adb push a launcher on it.
Sent From My Galaxy S 4G
Click to expand...
Click to collapse
Thank, but I went ahead and Odin'd back to the KAB build.

MvP77 said:
If your rooted you can adb push a launcher on it.
Sent From My Galaxy S 4G
Click to expand...
Click to collapse
My USB Debugging was off, so i couldnt do that

where did you download these files troby1986 ?

Ssgvendetta said:
where did you download these files troby1986 ?
Click to expand...
Click to collapse
krylon360 from Team Whiskey has the PIT posted on this site, and the TAR can be found at samfirmware.com

troby could you list exactly the steps you took? im having same problem, stuck in recovery

troby1986 said:
krylon360 from Team Whiskey has the PIT posted on this site, and the TAR can be found at samfirmware.com
Click to expand...
Click to collapse
where he post pit file can i have link please or pit file my phone was dead i repaired with jtag but now need flash with re-partition
B.R

troby1986 said:
Ok, so I attempted to Odin back to the leaked stock KAB file using the leaked PIT for the Vibrant 4g.
Everything seemed to work fine on the Odin side of the house, but now my phone only boots into recovery. Any help.
I am using Odin 1.81
The PIT uploaded by krylon360
The leaked T959VUVKAB tar
I placed the TAR in the PDA section of Odin
Any help is greatly appreciated.
Click to expand...
Click to collapse
If you searched the dev section that PIT doesn't work and will brick your phone like it did mine. I had to get my phone replaced. Even Krylon said not to use it in one of a couple threads in here. There are plenty of warnings in the DEV section saying not to use any PIT files.

How can I put this...
DO NOT USE PIT! DO NOT USE PIT! DO NOT USE PIT!
That is all.
Sent from my SGH-T959V using XDA App

http://forum.xda-developers.com/showpost.php?p=12747892&postcount=234

Captivate multi files ODIN

Hi guys I need the boodloader, PDA, phone and CSC files, I did a downgrade of CM9 to gingerbread 2.3.5 stock ROM single FILE and my phone start in to recovery mode and says something is wrong so I read I need to flash to multi files pack

guelofh said:
Hi guys I need the boodloader, PDA, phone and CSC files, I did a downgrade of CM9 to gingerbread 2.3.5 stock ROM single FILE and my phone start in to recovery mode and says something is wrong so I read I need to flash to multi files pack
Click to expand...
Click to collapse
you should try one of the one-click odin packages by TRusselo: http://forum.xda-developers.com/showthread.php?t=979133

-SGA- said:
you should try one of the one-click odin packages by TRusselo: http://forum.xda-developers.com/showthread.php?t=979133
Click to expand...
Click to collapse
Thanks a lot man.
Sent from my SGH-I897 using Tapatalk 2

[HELP] How to unroot and install trhe stock firmware?

Hi guys
I have a problem...i have rooted the galaxy s scl of my friend but now he want it unrooted.
I have the frankestain mod rom and i should unroot it and install a stock firmware..
How could i do it?

Flash kpe before flashing to another stock firmware such as kpu.
Sent from my GT-I9003 using xda premium

Flash XXKPE with Odin. The flash any other firmware of your choice

I still dont understand why everyone say to flash kpe first...
Seriously plz explain it to me !!
Sent from my GT-I9003 using xda app-developers app

Plz everyone here from the next time do this kind of chit-chat in general thread this is Development thread.
And for ans flash any stock rom using odin you will be unroot and on stovk rom too. For steps follow this thread.
http://forum.xda-developers.com/showthread.php?t=1133787

nicsptl said:
Plz everyone here from the next time do this kind of chit-chat in general thread this is Development thread.
And for ans flash any stock rom using odin you will be unroot and on stovk rom too. For steps follow this thread.
http://forum.xda-developers.com/showthread.php?t=1133787
Click to expand...
Click to collapse
I have done it but now in the phone there's only the bootanimation but nothing else...

G.Galante said:
I have done it but now in the phone there's only the bootanimation but nothing else...
Click to expand...
Click to collapse
you got bootloop, flash XXKPE+PIT it can solve your prob after flash that firmware,flash another stable firmware than XXKPE

simratcs said:
I still dont understand why everyone say to flash kpe first...
Seriously plz explain it to me !!
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Because kpe is came with full firmware that is (bootloader, pda, phone,csc)
And when you use pit file you need all these files
To unroot single pda file also works
If any problems facing then flash with pit+kpe
Correct me if I am wrong
Sent from my GT-I9003 using xda premium

why KPE+PIT
OK, first for all, we have 2 type of firmware.
1. one package .tar file.
2. component type firmware .tar file.
for one package type, you only see one tar file which are flash using odin place in the PDA box. this is the incremental patch from you current working phone. you find all the data still in place.
for the component type firmware, you will have 3 or 4 tar file to flash using odin and place it in respective box. you will need to reset you phone, all the data will gone.
so, why must using component type, if need to flash to stock. Becuase you already corropted the firmware.
1. you have change the recovery partition and rooted and with custome kernel.
2. you have converted to EXT4, (stock is rfs)
3. you have bootloop because the above you have done.
others which having same thing done but not at bootloop, its becuase their done the home work (search and read). this i'm very sure about it.
so, if you have the boot loop, mean you done some step wrong.
so to save you, follow the instruction on the link above you should be fine.
legend:
pit file - this is partition information table, to tell the odin and phone how to prepare the partition for flashing.
example: I9003_latona_20110114.pit
PDA tar: contant all the system partition.
example: I9003DXKF1-REV08-ALL-low-CL1020446.tar
CSC tar: contant of regional specified setting
example: GT-I9003-CSC-MULTI-OLBKB2.tar
Modem: contant the hardware setting.
example:MODEM_I9003DXKB2_REV_00_CL863799.tar
bootloader, do not use this, if you are not upgrading from Froyo to GB. as this is a very important portion of you phone. ( the name already tell you that, "boot" "loader") do not mass with it.
same as PC, when you infected by virus or you have done someting corrupted the file of windows, you will need a reformat or reinstall OS.
hence, for the phone, flash the KPE+PIT
same as PC, when you wanted to update the windows update, you will just click the update and the windows patch file will install, same as you flash the 1 package firmware.
that all, hope you can understant

chongns said:
why KPE+PIT
OK, first for all, we have 2 type of firmware.
1. one package .tar file.
2. component type firmware .tar file.
for one package type, you only see one tar file which are flash using odin place in the PDA box. this is the incremental patch from you current working phone. you find all the data still in place.
for the component type firmware, you will have 3 or 4 tar file to flash using odin and place it in respective box. you will need to reset you phone, all the data will gone.
so, why must using component type, if need to flash to stock. Becuase you already corropted the firmware.
1. you have change the recovery partition and rooted and with custome kernel.
2. you have converted to EXT4, (stock is rfs)
3. you have bootloop because the above you have done.
others which having same thing done but not at bootloop, its becuase their done the home work (search and read). this i'm very sure about it.
so, if you have the boot loop, mean you done some step wrong.
so to save you, follow the instruction on the link above you should be fine.
legend:
pit file - this is partition information table, to tell the odin and phone how to prepare the partition for flashing.
example: I9003_latona_20110114.pit
PDA tar: contant all the system partition.
example: I9003DXKF1-REV08-ALL-low-CL1020446.tar
CSC tar: contant of regional specified setting
example: GT-I9003-CSC-MULTI-OLBKB2.tar
Modem: contant the hardware setting.
example:MODEM_I9003DXKB2_REV_00_CL863799.tar
bootloader, do not use this, if you are not upgrading from Froyo to GB. as this is a very important portion of you phone. ( the name already tell you that, "boot" "loader") do not mass with it.
same as PC, when you infected by virus or you have done someting corrupted the file of windows, you will need a reformat or reinstall OS.
hence, for the phone, flash the KPE+PIT
same as PC, when you wanted to update the windows update, you will just click the update and the windows patch file will install, same as you flash the 1 package firmware.
that all, hope you can understant
Click to expand...
Click to collapse
That i already know man..
But why kpe first..
Does it like increases the battery life or what ??
Everyone says to flash kpe...
But what about ddkp3 ??
Sent from my GT-I9003 using xda app-developers app

simratcs said:
That i already know man..
But why kpe first..
Does it like increases the battery life or what ??
Everyone says to flash kpe...
But what about ddkp3 ??
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Kpe is the foundation of the other stock rom.

simratcs said:
That i already know man..
But why kpe first..
Does it like increases the battery life or what ??
Everyone says to flash kpe...
But what about ddkp3 ??
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
no that "must" use KPE, it depend on your choose, as long as it is component type firmware, i use DXKF1, so far so good. and most importantly you can use it with pit file. note: 1 package tar file can not use with pit file.
if you want to solve the bootloop, either you do trouble shoot the rootcause, or close you eyes, and once and for all "reformat" your phone.
that why we need the pit.
hope you "already" know that.
BTW, i see no different on KPE on battery life. i use DXKP9 it is a GB, and flash Bam Kernel. battery life is good 1.5day per charge.

[Q] Verizon galaxy s3 jelly bean

I'm new to this and need help using Odin. Is there a step by step video so I don't brick my phone? I'm trying to get the newest jb leak. I'm good up until I have to actually have to flash the Rom in Odin. I don't know what I'm supposed to do.. can anyone help me or walk me thru.

It's very easy. I was apprehensive too. Basically all you do is download drivers for this phone, download Odin and download your tar file. In Odin select pda, select your downloaded tar file, wait for the computer to analyze the tar file and show a com port, connect your phone and hit start. Openyoureyes has a sticky in the development thread that clearly details how to do all of this. Follow the steps and make sure you read all the details and you'll be fine.
Here's the thread.
http://forum.xda-developers.com/showthread.php?p=33701313
Sent from my SCH-I535 using xda premium

If you just want to flash the ROM then use Odin, but if you want to root definitely go this way: http://droidmodderx.com/galaxys3/?page_id=159 after that download goomanager(twrp) or ez-recovery(CWM recovery) from the play store for a recovery. Then flashing after that is a piece of cake.

t
Ryno77 said:
It's very easy. I was apprehensive too. Basically all you do is download drivers for this phone, download Odin and download your tar file. In Odin select pda, select your downloaded tar file, wait for the computer to analyze the tar file and show a com port, connect your phone and hit start. Openyoureyes has a sticky in the development thread that clearly details how to do all of this. Follow the steps and make sure you read all the details and you'll be fine.
Here's the thread.
http://forum.xda-developers.com/showthread.php?p=33701313
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Ok, thank u so much.. I am wondering what exactly the tar file is and how do I find that? Will a list pop up when I click on pda? I installed on my desktop usb drivers, and Odin.

yea dont worry man just take your time, your phone isnt going anywhere and roms just get better and batter with time so dont stress about missing out.... make sure you dont mess up your phone =P welcome to the dark side btw =P

mdanielsii said:
Ok, thank u so much.. I am wondering what exactly the tar file is and how do I find that? Will a list pop up when I click on pda? I installed on my desktop usb drivers, and Odin.
Click to expand...
Click to collapse
A tar file is the type of file you flash in Odin. You download the tar file on your computer..... Save it to the desktop or whatever is obvious and easy to find. In Odin select pda and browse for the file you just downloaded. I suggest you keep reading about this for a while before you try it.
Sent from my SCH-I535 using xda premium

mdanielsii said:
I'm new to this and need help using Odin. Is there a step by step video so I don't brick my phone? I'm trying to get the newest jb leak. I'm good up until I have to actually have to flash the Rom in Odin. I don't know what I'm supposed to do.. can anyone help me or walk me thru.
Click to expand...
Click to collapse
I only used odin to flash the root and the recovery..I went through goo manager to download the rom and gapps.you can also download/flash twrp 2 which is a good recovery in goo manager. then I used the recovery to flash the rom and gapps..

Jelly Bean MIUI 2.9.14
Hey guys I flashed this rom other day pretty cool, but mms not working correctly. I didnt touch it as tread say, but still acting up. The mms coming in are fine just out going where problem happens. Do any of u have any ideas to fix this? I would appreciate it.

mdanielsii said:
Ok, thank u so much.. I am wondering what exactly the tar file is and how do I find that? Will a list pop up when I click on pda? I installed on my desktop usb drivers, and Odin.
Click to expand...
Click to collapse
The .tar file is the JB leak you downloaded. Its format is .tar so Odin can recognize it and flash it to your phone. If you were in the thread where the newest VZW JB leak was, it should be download #6, #7, or #8 depending on what you wanted to do. Suppose you only wanted a stock experience. You'd download #8. It comes in a .tar format so you can put it directly into Odin for flashing.
When you click on PDA, Windows Explorer should come up. Here, navigate to the directory where you downloaded the .tar (the ROM) and double click it. Now, next to PDA in Odin, it should show the name of the ROM.
ONLY do the PDA method with this JB leak. Don't (and I mean DON'T) touch Bootloader, Phone, or CSC in Odin. Only PDA.
This JB leak will NOT get rid of any of your data, applications, SD card, etc. Everything stays on your phone, just like an OTA.
If you have any more questions, feel free to ask!

Ok, thank you. Successfully flashed! Now I'd like to know how I root my phone and get gapps and what not
Sent from my SCH-I535 using xda app-developers app

Only 756mb internal storage

After flashing a patched .pit file my internal storage has decreased to a laughable 756mb.
Is there anyway to get my storage back. Have tried flashing a different pit file but no luck
Sent from my GT-N7100 using xda premium

kersey said:
After flashing a patched .pit file my internal storage has decreased to a laughable 756mb.
Is there anyway to get my storage back. Have tried flashing a different pit file but no luck
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
First of all... WHY did you do it?
Second, find attached the PIT for P6200 of different sizes

viper001 said:
First of all... WHY did you do it?
Second, find attached the PIT for P6200 of different sizes
Click to expand...
Click to collapse
Thanks for the pit files but i have already tried flashing a stock pit file and also patched ones but my storage size stays the same.
The reason i flashed patched pit files was that i had the emmc brick bug issue.
Sent from my GT-N7100 using xda premium

kersey said:
Thanks for the pit files but i have already tried flashing a stock pit file and also patched ones but my storage size stays the same.
The reason i flashed patched pit files was that i had the emmc brick bug issue.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Have you tried a complete flash via odin with re-partition checked?

viper001 said:
Have you tried a complete flash via odin with re-partition checked?
Click to expand...
Click to collapse
Yep, tried everything, flashing stock pit files, the patched ones with different ranges and then both honeycomb and ICS rom's but the storage doesn't change
Sent from my GT-N7100 using xda premium

This is because the your partitions are redefined with the another pit file. I have this bug too and solving the bug I lost 8gb.
You must make your own pit file to solve this, but this require knowledgment about the operation, if you make anything wrong you lost your tab.
Look the gtab 7.7 forum or developer topic on this forum, there are one "tutorial", but you will lost the affect area of mmc...
Sent from my GT-P6200L using xda app-developers app