After trying so many way [Flashing Different cROM and GB Kernels, reading different threading] of solving this problem,
I found a solution and my phone is fully awake and usable as usual.
I thought, service center is all that I need
Anyway here are the solution, I Did.
1. Flash KPE [4 files with latona.pit] [errors appears] [Tried to push [Wipe Cache] and [Wipe Data/Factory Reset] No Success
2. Download Mode and Flash LF2 [http://forum.xda-developers.com/showpost.php?p=22423505&postcount=5] [errors appears]
3. Download Mode and Flash Kernel [Bam custom Kernel - PDA_BCK_CF-Root Universal Beta14fix]
4. I download Ext4 convertor script [From ganeshbiyer] Thanks to him, I guess this is the one who save my phone.
5. This is the hard part, I copied the script to SDcard. I buy MicroSD reader, I remove the MicroSD from the phone and copy the Ext4 convertor script file
6. Boot the phone is CWM [Volume UP+Home+Power], and flash the script,
7. Download Mode and Flash LF2 once again via Odin [error appears]
8. But I just push [wipe cache] and [wipe data/factory reset]
9. Reboot Phone
Then my phone successfully reboot in Stock LF2 :good: :angel:.
I hope this could help to anyone who have same problem.
Malunkot said:
Hello to all, I really need a help who knows this problem.
I'm flashing Dhiru Alpha 14 GB rom a lot, but this problem happen to now, after flashing.
I came on Bootloop, so I decided to Flash stock ROM.. KPE
and this happen.. I don't know this error..
Your storage is not prepared yet, please use UI menu for format and reboot action.
Meida Files copy failed
E:format-volume:rfs format failed on /dev/block/mmcblk0p3
Data wipe failed.
Attached image.. but I can go to recover.. Try many time to flash KPE (4 files) this is always appear after successful flashing via odin.
Please someone help me. :~(
Thanks in advance.
Click to expand...
Click to collapse
malungkot said:
Hello to all, I really need a help who knows this problem.
I'm flashing Dhiru Alpha 14 GB rom a lot, but this problem happen to now, after flashing.
I came on Bootloop, so I decided to Flash stock ROM.. KPE
and this happen.. I don't know this error..
Attached image.. but I can go to recover.. Try many time to flash KPE (4 files) this is always appear after successful flashing via odin.
Please someone help me. :~(
Thanks in advance..
Click to expand...
Click to collapse
Try flashing latona.pit file..then Full XXKPE package....
Re: Please Help Me....
You are getting error because your phone is not root. and you are using stock cwm mode.After flashing stock ROM. flash any kernel available for GB.which will root your mobile as well as install cwm5. then install CM9 or CM10.
malungkot said:
After trying so many way [Flashing Different cROM and GB Kernels, reading different threading] of solving this problem,
I found a solution and my phone is fully awake and usable as usual.
I thought, service center is all that I need
Anyway here are the solution, I Did.
1. Flash KPE [4 files with latona.pit] [errors appears] [Tried to push [Wipe Cache] and [Wipe Data/Factory Reset] No Success
2. Download Mode and Flash LF2 [http://forum.xda-developers.com/showpost.php?p=22423505&postcount=5] [errors appears]
3. Download Mode and Flash Kernel [Bam custom Kernel - PDA_BCK_CF-Root Universal Beta14fix]
4. I download Ext4 convertor script [From ganeshbiyer] Thanks to him, I guess this is the one who save my phone.
5. This is the hard part, I copied the script to SDcard. I buy MicroSD reader, I remove the MicroSD from the phone and copy the Ext4 convertor script file
6. Booth the phone is CWM [Volume UP+Home+Power], and flash the script,
7. Download Mode and Flash LF2 once again via Odin [error appears]
8. But I just push [wipe cache] and [wipe data/factory reset]
9. Reboot Phone
Then my phone successfully reboot in Stock LF2 :good: :angel:.
I hope this could help to anyone who have same problem.
Click to expand...
Click to collapse
Could you please help me! I have got the exact same problem. upto step 5 i think i have done correctly.my cell boots up into CWM,then i flashed those scripts.
then i flashed LF2 (i think this is where i have got wrong)
then i got error messages d then while booting up into recovery,it boots into stock recovery!!
there i cleared cache & factory reset
but the phone still bootloops.
could you point out where did i go wrong?and
while flashing LF2 after scripts,all i need to do is select .md5 file in PDA with ticking auto-reboot and reset time?
please help
me_death said:
Could you please help me! I have got the exact same problem. upto step 5 i think i have done correctly.my cell boots up into CWM,then i flashed those scripts.
then i flashed LF2 (i think this is where i have got wrong)
then i got error messages d then while booting up into recovery,it boots into stock recovery!!
there i cleared cache & factory reset
but the phone still bootloops.
could you point out where did i go wrong?and
while flashing LF2 after scripts,all i need to do is select .md5 file in PDA with ticking auto-reboot and reset time?
please help
Click to expand...
Click to collapse
Try to continue this step..
3. Download Mode and Flash Kernel [Bam custom Kernel - PDA_BCK_CF-Root Universal Beta14fix]
4. I download Ext4 convertor script [From ganeshbiyer] Thanks to him, I guess this is the one who save my phone.
5. This is the hard part, I copied the script to SDcard. I buy MicroSD reader, I remove the MicroSD from the phone and copy the Ext4 convertor script file
6. Booth the phone is CWM [Volume UP+Home+Power], and flash the script,
7. Download Mode and Flash LF2 once again via Odin [error appears]
8. But I just push [wipe cache] and [wipe data/factory reset]
9. Reboot Phone
malungkot said:
Try to continue this step..
3. Download Mode and Flash Kernel [Bam custom Kernel - PDA_BCK_CF-Root Universal Beta14fix]
4. I download Ext4 convertor script [From ganeshbiyer] Thanks to him, I guess this is the one who save my phone.
5. This is the hard part, I copied the script to SDcard. I buy MicroSD reader, I remove the MicroSD from the phone and copy the Ext4 convertor script file
6. Booth the phone is CWM [Volume UP+Home+Power], and flash the script,
7. Download Mode and Flash LF2 once again via Odin [error appears]
8. But I just push [wipe cache] and [wipe data/factory reset]
9. Reboot Phone
Click to expand...
Click to collapse
i tried those steps
bro,could you tell me about partitioning memory card? i think that's what i have missed.
how do i partition in windows?
me_death said:
i tried those steps
bro,could you tell me about partitioning memory card? i think that's what i have missed.
how do i partition in windows?
Click to expand...
Click to collapse
I didn't partition my memory card in windows., just copy the Ext4 convertor script [From ganeshbiyer] so my SDCard.
and that's it. take you SD card and put it in memory card reader and copy this script.
if you did that, i guess your in deep problem. Maybe you need service center to do that..
Goodluck
Related
I have looked on the site and cant find a complete stock rom for AT&T? If there is one can someone provide a link.
Thanks,
GJ
http://forum.xda-developers.com/showthread.php?t=1548750
So I would just boot into CWM recovery and then install the zip?
1. Nandroid your current setup (so you get back to where you are now)
2. put all the zips you plan to flash on your sdcard
3. reboot to CWM Recovery
4. flash new modem (if you're planning on changing your modem)
5. wipe data / factory reset
6. wipe /cache partition
7. under "Mounts and Storage", Format /system
8. under "Advanced", wipe Dalvic Cache
9. flash rom zip
10. flash kernel zip (if not in rom above)
11. reboot
read through the DEV section under [ROM].. and read the OP (post 1)... each DEV gives recommended steps for flashing zip (CWM) or flashing tars (ODIN). You may also want to use Darkside Superwipe to ensure you clear all previous rom traces prior to flashing new rom.
Hello,
i tried to install Xperia_Ice_Cream_Pureness_build_14 on my phone, i followed the instructions provided as:
.Flash 4.1.B.0.587 ftf using flashtool - I did this but then i realised that ive to flash my phone with the MT11i_4.1.A.0.562_Kernel in order to root it. I rooted it successfully but then forgot to flash the phone using 0.587 ftf.
I proceeded the next steps precisely:
1.Factory reset in cwm
2.wipe cache partition
3.wipe dalvik cache
4.Format /system (in mounts and storage)
5.Format /cache
6.Format /Data
After this step i realised that i had not transfered the below mentioned files (Step 7 & 8) to my SD-Card, as it was not written anywhere...So i switched off my phone to take out the Memory Card
But now my phone is not loading up Only SONY logo comes and nothing happens after it.... PLEASE HELP! My Phone is Dying :'(
7.Install Xperia_Ice_Cream_Pureness_build_13.00.zip
8.Install patch for your phone model
9.Reboot now and you are done !
start from scratch..flash .587fw using flashtool..root..cwm..and this time transfer those files to sd..
Hi,
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
I did the following steps mentioned in the ROM page of XDA to install the custom ROM on my phone.
1. Flash boot.img from .zip via Fastboot ---- LEFT OUT THIS ONLY STEP BY MISTAKE and done the subsequent steps.
2. Enter CWM
3. Make a full wipe:
4. Wipe Data/Factory Reset
5. Wipe Cache
6. Wipe Dalvik Cache
7. format /data (advanced)
8. format /dache (advanced)
9. format /system (advanced)
-Flash ROM. --- YET TO FLASH THE ROM.
I'm unable to access CWM. I can't power off, I can only restart, but getting stuck at Sony logo everytime. It would be very kind if you could help me in getting the phone to work as normal.
Thanks,
Irfan
the sulotion
saeedirfaan said:
Hi,
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
I did the following steps mentioned in the ROM page of XDA to install the custom ROM on my phone.
1. Flash boot.img from .zip via Fastboot ---- LEFT OUT THIS ONLY STEP BY MISTAKE and done the subsequent steps.
2. Enter CWM
3. Make a full wipe:
4. Wipe Data/Factory Reset
5. Wipe Cache
6. Wipe Dalvik Cache
7. format /data (advanced)
8. format /dache (advanced)
9. format /system (advanced)
-Flash ROM. --- YET TO FLASH THE ROM.
I'm unable to access CWM. I can't power off, I can only restart, but getting stuck at Sony logo everytime. It would be very kind if you could help me in getting the phone to work as normal.
Thanks,
Irfan
Click to expand...
Click to collapse
the soulotion
You need xperia Flash tools 0.9.13 on your PC
you need the orginal xperia sola flashable file FTF (go to flash tool folder and past the Ftf file into frimware folder)
then boot into flash mode ( i think you can boot into flash mode in xperia sola by plug the usb and press Vol-down the the led has a whit color if this same xperia Go )
And from the flash tool program press flash the device then you have two choice, select flashmod.
then will show new window (frimware selector) chose the frimware you are coped into flas tool folder
the device will flashed with the ftf file and follow the instruc....
Someone please i need serious help with my explorer.
So this is what happened today i finally rooted my explorer and i looked at a 4.0 jelly bean update and saw that your phone needed to be rooted so thats what i did.Then i downloaded the zip and copyed it to my sd card so after that i went into recovery mode (CWM) and used "install zip through sd card" or somthing like that. so i proceeded to install the update after it installed a message at the bottom said that the instalation aborted and i rebooted the device. Then it happened the damn thing froze and i tried neraly everything i could find from forums.
so please please help me
flash a custom rom after cleaning everything in recovery.
Affangta said:
flash a custom rom after cleaning everything in recovery.
Click to expand...
Click to collapse
So how do I clean up recovery do I just do a wipe and a factory reset and then use one of the rooms on this website
jbra97 said:
So how do I clean up recovery do I just do a wipe and a factory reset and then use one of the rooms on this website
Click to expand...
Click to collapse
go to recovery:
1. wipe factory data/reset
2.go to mounts and storage
3.format everything except sd card.
4.go to advanced.
5.wipe dalvich cache.
6. go to install zip through sd card select the rom zip.
7.after install reboot.
done.
shubhojit89 said:
go to recovery:
1. wipe factory data/reset
2.go to mounts and storage
3.format everything except sd card.
4.go to advanced.
5.wipe dalvich cache.
6. go to install zip through sd card select the rom zip.
7.after install reboot.
done.
Click to expand...
Click to collapse
Cheers mate actually worked
Hi. When i install it and reboot phone i saw only htc logo (not boot animation). So how install it?
michal16 said:
Hi. When i install it and reboot phone i saw only htc logo (not boot animation). So how install it?
Click to expand...
Click to collapse
First, reboot into recovery.
2) Wipedata/factory reset
3) Mount everything
4) Wipe everything except SD-Card
5) (If in CWM recovery, go in advanced and here Wipe Dalvik cache)
6) Install the ROM
7) Advanced - Fix permissions
If still not working, try this: http://forum.xda-developers.com/showthread.php?t=2389445 I wasn't able to boot any single ROM based on HTC Sense, but when I've tried this, it worked for me
Hope I helped
So i have to use cwm?
I have to format SD card?
I try 2nd method
michal16 said:
So i have to use cwm?
I have to format SD card?
I try 2nd method
Click to expand...
Click to collapse
No, you can choose But when you have CWM, the Dalvik chache option is in Andvanced. In TWRP recovery it's in the wipe option
You don't have to format SD-Card (Only if you want to have increased internal memory, then do a second partition (ext4) and then use the app mount2sd)
When you want to use the file in the link, follow the instructions in the guide from the link and then do the steps I mentioned
I dont have burned nand
I doing it and nothing. This is why i asking.
i have 2 partitions