Hello,
i tried to install Xperia_Ice_Cream_Pureness_build_14 on my phone, i followed the instructions provided as:
.Flash 4.1.B.0.587 ftf using flashtool - I did this but then i realised that ive to flash my phone with the MT11i_4.1.A.0.562_Kernel in order to root it. I rooted it successfully but then forgot to flash the phone using 0.587 ftf.
I proceeded the next steps precisely:
1.Factory reset in cwm
2.wipe cache partition
3.wipe dalvik cache
4.Format /system (in mounts and storage)
5.Format /cache
6.Format /Data
After this step i realised that i had not transfered the below mentioned files (Step 7 & 8) to my SD-Card, as it was not written anywhere...So i switched off my phone to take out the Memory Card
But now my phone is not loading up Only SONY logo comes and nothing happens after it.... PLEASE HELP! My Phone is Dying :'(
7.Install Xperia_Ice_Cream_Pureness_build_13.00.zip
8.Install patch for your phone model
9.Reboot now and you are done !
start from scratch..flash .587fw using flashtool..root..cwm..and this time transfer those files to sd..
Related
Please excuse me as I am new to this....
I have a g2x rooted, nvflashed cwm and installed EaglesBlood build 5. Each time I have installed it after booting the phone into cwm and .... please see remaining post......
clean install of egb
1) Power down phone and restart / boot into clockworkMod Recovery v5.0.2.0
2) Select " -wipe data/factory reset -- Wiping data...
Formatting /data...
Formatting /cache...
Formatting /sd-ext...
Formatting /sdcard/.android_secure...
Data wipe complete.
3) Select wipe cache partition -- Wiping cache...
Formatting /cache
Cache wipe complete.
4) Select -advanced
5) Select -Wipe Dalvik Cache E:unknown volume for path [/sd-ext]
Dalvik Cache wiped.
6) Select +++++Go Back+++++
7) Select -install zip from sdcard
8) Select -choose zip from sdcard
9) select -p999_6_26_12.zip
10) Select -Yes - Install p999-6-26-12.zip
Then follow the remainder of the configuration options of the install ( specifying 21y ) as an option and gaps from sd card and then run the installer. Install completes stating " Congratulations...
EaglesBlood has been installed into your devic
Installer Status:0
Can someone please tell me why I have an error " E:unknown volume for path [/sd-ext]" being displayed after selecting _wipe Dalvik cache. The phone then completes wiping Dalvik cache.'
As stated earlier, the program does install and apprears to run as well as egb build 4
Is there something I need to do to get this issue resolved. I have tried a different sd card as well as then formatting it with cwm and or in my computer (scanned it using win7) for errors and bad clusters, and copied files from my computer to the root on the sd card. I did root, flash CWM using nvflash, do a droid bachup prior to first installing EGB build 4. and now am at a loss as to how to remedy or repair this "unknown volume" issue on a new install.
Any and all help is GREATLY appreciated!!!
Thanks in advance.
I received that error before while wiping davlik. But only once after I reboot an tried again I never got it again. Am sure you tried that just giving my experience on it
Sent from my LG-P999
Its normal for are device we don't have sd ext.... That's why it skips over and continues
Sent from my LG-G2x using Tapatalk 2
So it is not dependent on baseband, kernel, rom, etc. It is just a g2x thing, and nothing to be concerned with while moding/flashing various rom's ? :good:
1800cc_HD_SE said:
So it is not dependent on baseband, kernel, rom, etc. It is just a g2x thing, and nothing to be concerned with while moding/flashing various rom's ? :good:
Click to expand...
Click to collapse
Yea its totally fine
Sent from my LG-G2x using Tapatalk 2
hi to all
i'm new to android and sony ericsson, there is first time for everything :fingers-crossed:
i found that thread : http://www.androidust.com/single-click-root-for-xperia-arc-s-ics-4-0-4-with-unlocked-bootloader/ and do that. now i want to do that: http://forum.xda-developers.com/showthread.php?t=1788701, but i don't know how to do that. what software-tools do i need? i flashed phone so many times and try to root it, but without success.
how to do those instructions:
1.Factory reset in cwm-how can i install cwm? i tried many things, but nothing worked
2.wipe cache partition-how can i do that?
3.wipe dalvik cache-what is dalvik
4.Format /system (in mounts and storage) - how to do that?
5.Format /cache-again how?
6.Format /Data
7.Install Xperia_Ice_Cream_Pureness_build_10.00.zip - tools?
8.Install patch for your phone model
9.Reboot now and you are done !
After trying so many way [Flashing Different cROM and GB Kernels, reading different threading] of solving this problem,
I found a solution and my phone is fully awake and usable as usual.
I thought, service center is all that I need
Anyway here are the solution, I Did.
1. Flash KPE [4 files with latona.pit] [errors appears] [Tried to push [Wipe Cache] and [Wipe Data/Factory Reset] No Success
2. Download Mode and Flash LF2 [http://forum.xda-developers.com/showpost.php?p=22423505&postcount=5] [errors appears]
3. Download Mode and Flash Kernel [Bam custom Kernel - PDA_BCK_CF-Root Universal Beta14fix]
4. I download Ext4 convertor script [From ganeshbiyer] Thanks to him, I guess this is the one who save my phone.
5. This is the hard part, I copied the script to SDcard. I buy MicroSD reader, I remove the MicroSD from the phone and copy the Ext4 convertor script file
6. Boot the phone is CWM [Volume UP+Home+Power], and flash the script,
7. Download Mode and Flash LF2 once again via Odin [error appears]
8. But I just push [wipe cache] and [wipe data/factory reset]
9. Reboot Phone
Then my phone successfully reboot in Stock LF2 :good: :angel:.
I hope this could help to anyone who have same problem.
Malunkot said:
Hello to all, I really need a help who knows this problem.
I'm flashing Dhiru Alpha 14 GB rom a lot, but this problem happen to now, after flashing.
I came on Bootloop, so I decided to Flash stock ROM.. KPE
and this happen.. I don't know this error..
Your storage is not prepared yet, please use UI menu for format and reboot action.
Meida Files copy failed
E:format-volume:rfs format failed on /dev/block/mmcblk0p3
Data wipe failed.
Attached image.. but I can go to recover.. Try many time to flash KPE (4 files) this is always appear after successful flashing via odin.
Please someone help me. :~(
Thanks in advance.
Click to expand...
Click to collapse
malungkot said:
Hello to all, I really need a help who knows this problem.
I'm flashing Dhiru Alpha 14 GB rom a lot, but this problem happen to now, after flashing.
I came on Bootloop, so I decided to Flash stock ROM.. KPE
and this happen.. I don't know this error..
Attached image.. but I can go to recover.. Try many time to flash KPE (4 files) this is always appear after successful flashing via odin.
Please someone help me. :~(
Thanks in advance..
Click to expand...
Click to collapse
Try flashing latona.pit file..then Full XXKPE package....
Re: Please Help Me....
You are getting error because your phone is not root. and you are using stock cwm mode.After flashing stock ROM. flash any kernel available for GB.which will root your mobile as well as install cwm5. then install CM9 or CM10.
malungkot said:
After trying so many way [Flashing Different cROM and GB Kernels, reading different threading] of solving this problem,
I found a solution and my phone is fully awake and usable as usual.
I thought, service center is all that I need
Anyway here are the solution, I Did.
1. Flash KPE [4 files with latona.pit] [errors appears] [Tried to push [Wipe Cache] and [Wipe Data/Factory Reset] No Success
2. Download Mode and Flash LF2 [http://forum.xda-developers.com/showpost.php?p=22423505&postcount=5] [errors appears]
3. Download Mode and Flash Kernel [Bam custom Kernel - PDA_BCK_CF-Root Universal Beta14fix]
4. I download Ext4 convertor script [From ganeshbiyer] Thanks to him, I guess this is the one who save my phone.
5. This is the hard part, I copied the script to SDcard. I buy MicroSD reader, I remove the MicroSD from the phone and copy the Ext4 convertor script file
6. Booth the phone is CWM [Volume UP+Home+Power], and flash the script,
7. Download Mode and Flash LF2 once again via Odin [error appears]
8. But I just push [wipe cache] and [wipe data/factory reset]
9. Reboot Phone
Then my phone successfully reboot in Stock LF2 :good: :angel:.
I hope this could help to anyone who have same problem.
Click to expand...
Click to collapse
Could you please help me! I have got the exact same problem. upto step 5 i think i have done correctly.my cell boots up into CWM,then i flashed those scripts.
then i flashed LF2 (i think this is where i have got wrong)
then i got error messages d then while booting up into recovery,it boots into stock recovery!!
there i cleared cache & factory reset
but the phone still bootloops.
could you point out where did i go wrong?and
while flashing LF2 after scripts,all i need to do is select .md5 file in PDA with ticking auto-reboot and reset time?
please help
me_death said:
Could you please help me! I have got the exact same problem. upto step 5 i think i have done correctly.my cell boots up into CWM,then i flashed those scripts.
then i flashed LF2 (i think this is where i have got wrong)
then i got error messages d then while booting up into recovery,it boots into stock recovery!!
there i cleared cache & factory reset
but the phone still bootloops.
could you point out where did i go wrong?and
while flashing LF2 after scripts,all i need to do is select .md5 file in PDA with ticking auto-reboot and reset time?
please help
Click to expand...
Click to collapse
Try to continue this step..
3. Download Mode and Flash Kernel [Bam custom Kernel - PDA_BCK_CF-Root Universal Beta14fix]
4. I download Ext4 convertor script [From ganeshbiyer] Thanks to him, I guess this is the one who save my phone.
5. This is the hard part, I copied the script to SDcard. I buy MicroSD reader, I remove the MicroSD from the phone and copy the Ext4 convertor script file
6. Booth the phone is CWM [Volume UP+Home+Power], and flash the script,
7. Download Mode and Flash LF2 once again via Odin [error appears]
8. But I just push [wipe cache] and [wipe data/factory reset]
9. Reboot Phone
malungkot said:
Try to continue this step..
3. Download Mode and Flash Kernel [Bam custom Kernel - PDA_BCK_CF-Root Universal Beta14fix]
4. I download Ext4 convertor script [From ganeshbiyer] Thanks to him, I guess this is the one who save my phone.
5. This is the hard part, I copied the script to SDcard. I buy MicroSD reader, I remove the MicroSD from the phone and copy the Ext4 convertor script file
6. Booth the phone is CWM [Volume UP+Home+Power], and flash the script,
7. Download Mode and Flash LF2 once again via Odin [error appears]
8. But I just push [wipe cache] and [wipe data/factory reset]
9. Reboot Phone
Click to expand...
Click to collapse
i tried those steps
bro,could you tell me about partitioning memory card? i think that's what i have missed.
how do i partition in windows?
me_death said:
i tried those steps
bro,could you tell me about partitioning memory card? i think that's what i have missed.
how do i partition in windows?
Click to expand...
Click to collapse
I didn't partition my memory card in windows., just copy the Ext4 convertor script [From ganeshbiyer] so my SDCard.
and that's it. take you SD card and put it in memory card reader and copy this script.
if you did that, i guess your in deep problem. Maybe you need service center to do that..
Goodluck
Hi,
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
I did the following steps mentioned in the ROM page of XDA to install the custom ROM on my phone.
1. Flash boot.img from .zip via Fastboot ---- LEFT OUT THIS ONLY STEP BY MISTAKE and done the subsequent steps.
2. Enter CWM
3. Make a full wipe:
4. Wipe Data/Factory Reset
5. Wipe Cache
6. Wipe Dalvik Cache
7. format /data (advanced)
8. format /dache (advanced)
9. format /system (advanced)
-Flash ROM. --- YET TO FLASH THE ROM.
I'm unable to access CWM. I can't power off, I can only restart, but getting stuck at Sony logo everytime. It would be very kind if you could help me in getting the phone to work as normal.
Thanks,
Irfan
the sulotion
saeedirfaan said:
Hi,
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
I did the following steps mentioned in the ROM page of XDA to install the custom ROM on my phone.
1. Flash boot.img from .zip via Fastboot ---- LEFT OUT THIS ONLY STEP BY MISTAKE and done the subsequent steps.
2. Enter CWM
3. Make a full wipe:
4. Wipe Data/Factory Reset
5. Wipe Cache
6. Wipe Dalvik Cache
7. format /data (advanced)
8. format /dache (advanced)
9. format /system (advanced)
-Flash ROM. --- YET TO FLASH THE ROM.
I'm unable to access CWM. I can't power off, I can only restart, but getting stuck at Sony logo everytime. It would be very kind if you could help me in getting the phone to work as normal.
Thanks,
Irfan
Click to expand...
Click to collapse
the soulotion
You need xperia Flash tools 0.9.13 on your PC
you need the orginal xperia sola flashable file FTF (go to flash tool folder and past the Ftf file into frimware folder)
then boot into flash mode ( i think you can boot into flash mode in xperia sola by plug the usb and press Vol-down the the led has a whit color if this same xperia Go )
And from the flash tool program press flash the device then you have two choice, select flashmod.
then will show new window (frimware selector) chose the frimware you are coped into flas tool folder
the device will flashed with the ftf file and follow the instruc....
Hello,
im pretty new to rooting and custom roms but managed to root my Pico without a problem yesterday.
After that i installed this custom rom: http://forum.xda-developers.com/showthread.php?t=2375229
Using Philz Touch recovery v5.15.0
class 4 8gb sd-card
The steps i took:
Partitioned the card ext3 1gb swap 0
Wipe/factory reset
Flashed the rom
After 10 min at the HTC bootscreen the phone started but was very slow/unresponsive and had all kinda services/apps say "Process.xxx.xxx does not respond" pressing wait i got thru the setup but these problems continue with every app. Internet via mobile/wifi and even internet-pass-through is also very slow.
Im pretty sure there is something i didn't do correct as no one else has this problem.
I hope someone knows what the problem is.
ReAlDa62 said:
Hello,
im pretty new to rooting and custom roms but managed to root my Pico without a problem yesterday.
After that i installed this custom rom: http://forum.xda-developers.com/showthread.php?t=2375229
Using Philz Touch recovery v5.15.0
class 4 8gb sd-card
The steps i took:
Partitioned the card ext3 1gb swap 0
Wipe/factory reset
Flashed the rom
After 10 min at the HTC bootscreen the phone started but was very slow/unresponsive and had all kinda services/apps say "Process.xxx.xxx does not respond" pressing wait i got thru the setup but these problems continue with every app. Internet via mobile/wifi and even internet-pass-through is also very slow.
Im pretty sure there is something i didn't do correct as no one else has this problem.
I hope someone knows what the problem is.
Click to expand...
Click to collapse
Before Installing any rom follow this steps:
First you need to go in recovery..
1.Go to wipe data/factory reset.
2.Wipe cache partition.
3.Go to Advanced-> Wipw dalvick cache.
4.Go to mounts and storage->format system/data/cache/boot dont select format /sdcard.
5.Go to install zip select your rom zip -> select yes->install will start.
6.Reboot
This will solve your problem..
shubhojit89 said:
Before Installing any rom follow this steps:
First you need to go in recovery..
1.Go to wipe data/factory reset.
2.Wipe cache partition.
3.Go to Advanced-> Wipw dalvick cache.
4.Go to mounts and storage->format system/data/cache/boot dont select format /sdcard.
5.Go to install zip select your rom zip -> select yes->install will start.
6.Reboot
This will solve your problem..
Click to expand...
Click to collapse
That fixed it, thanks!