Blade v4.6.0
This is a ROM port from the HTC EVO One X by theDroidfanatic. You can see the original thread HERE.
As of today, 1-31-2013, this is NOT flashable!!! The updater script is still set up for the One X.
The reason I'm releasing this is because my Shift is down until my new flex cable comes in and I can't test anything so I'm asking for help. So far I've been through the majority of the ROM and I feel confident I've made a good start.
The ROMs I've used for parts are JellyBelly v6: Ultimate Edition and StockMod. I've also referenced Legendary-Infamous, MikRunny, and newRUNNY to see how they're put together as well.
I started by modifying Strapped365's JB Kernel in JellyBelly using this [GUIDE] How to port sense to non-HTC devices. Then using various other guides here on XDA, I've been modifying the port ROM to work on our device. I can put together a change log later after work. Now where I am at with this at the moment is the updater script. I've been through the rest of the ROM and think I have a good start but I haven't done anything in the META-INF folder. I am still reading up on how to write my own updater script but I'm not capable yet so those who want to help, this is my immediate need. In the past I was able to get a sense 4.0 One V port to boot on the Shift using an AOSP updater script but I think it may be necessary to write a new one so this will load right. I am a little unsure about the build.prop edits I've made going from GSM to CDMA so that needs to be double checked.
Any and all help is appreciated!
Thank you very much theDroidfanatic for your incredible work and permission to release this.
Change log
2/01/2013:
There is still A LOT of work to be done for this to boot.
Using JellyBelly v6 Ultimate, Changed the kernel using THIS and THIS.
I moved several apks from system/app to data/app to get the system folder down to 423MB
Changed the bootanimation
Changed the system lib modules by adding, overwriting files from base
Changed the system/lib/hw by adding, overwriting files from base
Replaced system/usr/keychars and system/usr/keylayout with system/usr/keychars and system/usr/keylayout from base
Went into system/etc and replaced vold.fstab, /wifi and /ppp with the ones from base
I'm not sure what to do with the Framework folder yet so I left it alone
Edited the build.prop
Also Reserved...
good luck with this, itd be great to see a functioning sense 4+ rom
Sweetness. I'd like to be a tester when you fix the update script.
Sent from my Nexus 10 using xda app-developers app
Ill download and change the updater script. Really all that need changed are the mmcblk0pXX mountpoints. But that's not going to promise anything lol
Sent from my myTouch_4G_Slide using Tapatalk 2
Thanks Strapped. I really appreciate it!
Dude, it would be absolutely awesome to see a sense 4 rom on the shift. Props for putting all the time and effort into this, your shift will be in my prayers.
Sent from my PG06100
Chad The Pathfinder said:
Thanks Strapped. I really appreciate it!
Click to expand...
Click to collapse
Yeah went from a status 7 got 5 args expected 3 to status 6 and that was just trying some simple changes. Ill compare some others a post a good META-inf when I get a sec
Sent from my myTouch_4G_Slide using Tapatalk 2
Drops jaw to ground.. You you you.. You are a master at porting!!
Sent from my VS920 4G using xda premium
megaghostgamer said:
Drops jaw to ground.. You you you.. You are a master at porting!!
Sent from my VS920 4G using xda premium
Click to expand...
Click to collapse
I know right Not to mention the kernel work :laugh:
Makes me really wish I could double-thank posts!!
Sent from my PG06100
Good Luck with this mate Hope you people will enjoy my ROM here as many do on the HOX forums
Cheers
megaghostgamer said:
Drops jaw to ground.. You you you.. You are a master at porting!!
Sent from my VS920 4G using xda premium
Click to expand...
Click to collapse
It's not booting quite yet
bilgerryan said:
It's not booting quite yet
Click to expand...
Click to collapse
That's mostly cause of the updater script right?
Sent from my VS920 4G using xda premium
bilgerryan said:
It's not booting quite yet
Click to expand...
Click to collapse
You guys are making me a little nervous. Keep in mind it may not work even when the updater script is fixed... others more experienced than I have tried to do this unsuccessfully.
Chad The Pathfinder said:
You guys are making me a little nervous. Keep in mind it may not work even when the updater script is fixed... others more experienced than I have tried to do this unsuccessfully.
Click to expand...
Click to collapse
Yes but there is always lady luck waiting to blow on your dice before you gamble
stare into oblivion
Fall into sleep
Chad The Pathfinder said:
You guys are making me a little nervous. Keep in mind it may not work even when the updater script is fixed... others more experienced than I have tried to do this unsuccessfully.
Click to expand...
Click to collapse
Nervous? Nah if they don't read the OP its their fault. Also no matter how effed the updater-script is it shouldn't flash for anyone because of the update binary
Sent from my myTouch_4G_Slide using Tapatalk 2
strapped365 said:
Nervous? Nah if they don't read the OP its their fault. Also no matter how effed the updater-script is it shouldn't flash for anyone because of the update binary
Sent from my myTouch_4G_Slide using Tapatalk 2
Click to expand...
Click to collapse
Oh too good.
Dont worry though Chad, the people who know what strapped is talking about are gonna be the only ones [trying to] flash it anyway :good:
Sent from my PG06100
CNexus said:
Oh too good.
Dont worry though Chad, the people who know what strapped is talking about are gonna be the only ones [trying to] flash it anyway :good:
Sent from my PG06100
Click to expand...
Click to collapse
Agreed I haven't flashed cause ive read it.. I might take a look inside later.. still gotta fix my Roms. So busy
Sent from my VS920 4G using xda premium
Ok I've been trying to figure out how to move forward with this and all I can figure is to start fresh using my ego 4g. Fortunately, JellyBelly Ultimate is on the evo already. Thanks bilgeryan. If I can get it to work that way, surely we can port it to the shift. If any one wants to digin and do whatever your creativity leads you to do then by all means do it. I'd like this to be a community effort as much as possible. Especially "sense" I'm not a dev. There's A LOT I don't know.
Related
So im sure many dev's know about the build.prop tweaks including krylon and drhonk(they just didnt have a phone to test on) so i took the liberty into modifying my own build.prop which is also in my team's rom ICBINB
im posting this build.prop for other devs or noobies to grab and look at
what ive noticed is that the values for the "sweet spot" on our phone are much different then those on other phones samsung and HTC
This is a performance mod/tweak and can turn any rom into an extremely smooth rom, basically this is ONE of the few secrets that make the ICBINB rom soo smooth but since i love our community ill release it so you can enjoy any rom with the smoothness of ICBINB
IF YOU USE ANY OF TEAM ACIDS MOD'S BE SURE TO GIVE CREDIT TO TEAM ACID ESPECIALLY THIS MOD, it WAS an ACID secret, and could have been kept secret so please be respectful of others people's work
*sigh* hope you guys dont just ditch my rom :/ LMAO!
be sure to hit thanks if its helped you
UPDATE: requested, i have made a modified build.prop for the GB users, note though that i have not tested it for GB so this was blind building however there should not be any proplems if there are let me know, you can either flash the GB rom then flash the performance zip or flash the GB rom and use a file explorer with root access to push the file manually, WHOEVER USES IT LEMME KNOW HOW IT WORKS PLEASE
UPDATE: i have found an even sweeter spot for the sgs4g, pleas enjoy even smoother, more fast and better battery saving qualities with the newly updated build.prop
If you had my low OC settings from ICBINB be aware they might cause the phone to freeze with this new build.prop im looking for new values now
Ooh! Awesome! So this can actually be used with other ROMs? Thanks a bunch dsexton702!
bkoon1218 said:
Ooh! Awesome! So this can actually be used with other ROMs? Thanks a bunch dsexton702!
Click to expand...
Click to collapse
ANY rom of your choosing, im not a greedy person and keep all my work open source
remember i didnt create all of the coding but the values of the coding are definitely mine
Big thanks!
Thanks alot dsexton. I have been using my own build prop with most of these tweaks in it but i have to admit i did not hit the sweet spot like u did with the values. Great job bro!!!!!!! U have enhanced this community in more ways than we can ever thank you for. Thanks for everything!
ill be adding the build prop to my rom once it hits final damm touch wiz grrr
your guys' happiness and thanks is all i need to continue it means a lot <3
im currently really close with the build.prop to make netflix work for froyo
i need an experienced person with netflix to do some testing can you work with me fatherof4 or anyone else? gtalk me @ [email protected]
Dsexton you and your team are awesome people
Sent from my SGH-T959V using XDA Premium App
Will this also work with stock gb Rom?
Sent from my SGH-T959V using XDA Premium App
No I will make another modified for GB rom
sent from my sgs4g 2.3.3, finally
dsexton702 said:
No I will make another modified for GB rom
sent from my sgs4g 2.3.3, finally
Click to expand...
Click to collapse
Awesome thanks
Sent from my SGH-T959V using XDA Premium App
Do we flash this or what
Sent from my SGH-T959V using XDA Premium App
Yes this gets flashed
Babyj303 said:
Do we flash this or what
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Sent from my SGH-T959V using XDA Premium App
OP updated with modified GB rom build.prop
works on gb kf2 pushed with root explorer thanks a ton!
slapshotx2002 said:
works on gb kf2 pushed with root explorer thanks a ton!
Click to expand...
Click to collapse
Did it improve the rom?
sent from my sgs4g 2.3.3, finally
*post deleted cus I'm dumb*
Sent from my SGH-T959V using XDA Premium App
using a file explorer with root access push the build.prop to /system then reboot give it 10-20 minutes to take full effect
dsexton702 said:
Did it improve the rom?
sent from my sgs4g 2.3.3, finally
Click to expand...
Click to collapse
bit of a noob, but seems to have made it a bit "snappier"
Can u use this on black ice as well?
Sent from my SGH-T959V using XDA Premium App
SMASHERSONLY said:
Can u use this on black ice as well?
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Yes I said this in the op
sent from my sgs4g 2.3.3, finally
As some of you have come from the captivate know what I did there with Rom Q&A threads. I am doing the same here. In an effort to clean up the site. All Rom related question shall from now on be posted in the proper Q&A or will be deleted on sight.
inspire section really needed this. thanks
Contacts bug
I have asked this before and i tried what the moderator said about adding a +1 to all my contacts but i still had the bug . Is there any future fix for rum runner rc3 or is this a bug we have to live with ? I wanna reinstall your rom but i hate the bug.
http://forum.xda-developers.com/showthread.php?p=16436793#post16436793
is this mabey a option
zombieguy85 said:
I have asked this before and i tried what the moderator said about adding a +1 to all my contacts but i still had the bug . Is there any future fix for rum runner rc3 or is this a bug we have to live with ? I wanna reinstall your rom but i hate the bug.
http://forum.xda-developers.com/showthread.php?p=16436793#post16436793
is this mabey a option
Click to expand...
Click to collapse
is what an option?
i already converted to the Sense 3.0 mms. this is in RC2
that RUU that is linked in that thread is the exact same RUU this rom is based on.
i dont have the problem any more, so it makes it kind of hard to troubleshoot or fix something i dont have...
PG - Any thoughts on the OC Daemon for RC3?
Ok I might download this and try it pirate thanks
Sent from my Desire HD using XDA App
stilger said:
PG - Any thoughts on the OC Daemon for RC3?
Click to expand...
Click to collapse
havent really given it much thought. thats far down on my list. i am struggling with some smali edits that are driving me crazy....
isnt it fairly easy to add afterward? didnt they make a flashable zip of the daemon+app for it? i dont really keep up with whats going on with that team...
Pirateghost said:
havent really given it much thought. thats far down on my list. i am struggling with some smali edits that are driving me crazy....
isnt it fairly easy to add afterward? didnt they make a flashable zip of the daemon+app for it? i dont really keep up with whats going on with that team...
Click to expand...
Click to collapse
Last I checked they had not but Ill look again. Thanks.
I can't stand that stupid method. Can't they just develop a GUI like setcpu that's so much easier to use?
Try going to the DHD thread for Android Revolution and find any post by Sybregunne. He made a gui program called Daemon Controller. Works great. The download link is in his signature.
Found the page. Try using this.
http://forum.xda-developers.com/showpost.php?p=16015003&postcount=43193
Is there a way to turn the battery percent off
Sent from my Inspire 4G using XDA App
zombieguy85 said:
Is there a way to turn the battery percent off
Sent from my Inspire 4G using XDA App
Click to expand...
Click to collapse
you would have to replace the png files in /system/framework/framework-res.apk with ones that dont have the %
Ok well ill just leave it the way it then LOL if it ain't broke don't fix it haha
Sent from my Inspire 4G using XDA App
Wolf_2 said:
Try going to the DHD thread for Android Revolution and find any post by Sybregunne. He made a gui program called Daemon Controller. Works great. The download link is in his signature.
Found the page. Try using this.
http://forum.xda-developers.com/showpost.php?p=16015003&postcount=43193
Click to expand...
Click to collapse
I haven't tried this yet, but here is a GUI to change Virtuous OC and ViperMod VDD
http://forum.xda-developers.com/showthread.php?t=1207546
Whiskey103 gave his thumbs up:
http://forum.xda-developers.com/showpost.php?p=16441475&postcount=5
XDA! : Where apps happen
zombieguy85 said:
Ok well ill just leave it the way it then LOL if it ain't broke don't fix it haha
Sent from my Inspire 4G using XDA App
Click to expand...
Click to collapse
have you found it yet? I can make one with no percent if u like
Sent from my Desire HD using XDA Premium App
Make one what ?
Sent from my Inspire 4G using XDA App
i can make u a battery with no percent if u still want it
edit: here ya go stock battery no percent
Sent from my Inspire 4G using XDA Premium App
oxlong27 said:
i can make u a battery with no percent if u still want it
edit: here ya go stock battery no percent
Sent from my Inspire 4G using XDA Premium App
Click to expand...
Click to collapse
THANK-YOU man worked perfectly your awesome
Sent from my Inspire 4G using XDA App
yep no problem
Sent from my Inspire 4G using XDA Premium App
ilove this rom
Found this while searching around google. It's a leaked RUU for the HTC Pico "explorer" which is a light version of Sense 3.5 on android 2.3.5 or most commonly known as "sense zero". I thought I would post it up so that you'll can start porting over to the hero.
The Pico specs are rather similar to our phone so it shouldn't be to difficult for someone to port it over, it's also mdpi so no resizing will be necessary.
If you are already considering taking on this project then more than likely you already know how to setup a flashable rom from a ruu but in case you need some refreshing the following will help:
Instructions:
- dsixda kitchen will need to be installed prior to starting.
1. Run RUU and leave open
2. Type %TEMP% in your computers start menu search bar.
3. Search through the folders in there with the long names with numbers and letters, you'll find a zip file named "rom.zip" in there.
4. Place the rom.zip in the original_update folder located in the "kitchen" directory
5. From there follow the steps on the kitchen menu to setup the rom.
6. Then proceed to porting to the hero. :]
- Download Pico RUU
Credits to capychimp for posting the leak up.
I'll check it out
私のEVO 3Dから送信される
Thanx bro ill start on it .hope this IS better than what I have been doin
Sent from my ADR6400L using XDA Premium App
Good luck fellas, wish I could help out. :[
Hopefully ill be able to borrow a hero from work to help with this.
Sent from my PC36100 using Tapatalk
All Smiles
i feel quite thankful cause u guys still workin on the hero. u guys are awesome i hope i get the same phone as u guys haha and follow more of your works
Thanks for posting this should save a ton of headaches lol. Rom.zip has been pulled and is being worked on
Sent from my ADR6300 using XDA App
CondemnedSoul said:
Thanks for posting this should save a ton of headaches lol. Rom.zip has been pulled and is being worked on
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
dl now bro,, we will get it done lol hopefully
tazzpatriot said:
dl now bro,, we will get it done lol hopefully
Click to expand...
Click to collapse
Hopefully? Since when is hopeful an option bro?
Sent from my ADR6300 using XDA App
this is great to see I cant wait to flash this.....
Sent from my HERO200 using XDA App
May pick this up.
Sent from my GT-P7510 using Tapatalk
Also, just a heads up, this thing may be running a new kernel, so it might not boot on first port with any of the kernels currently available to us. Someone good with kernels should be able to help out if this is the case?
Good looking out Flash. I'm actually going to try this ( which is laughable) .this phone just goes to show that the HTC hero is still perfectly capable of keeping up with android even with sense UI. Thanks to the devs and good luck to all.
I have a old heroc that I would send someone for dev help
Sent from my HERO200 using xda premium
griffincash said:
I have a old heroc that I would send someone for dev help
Sent from my HERO200 using xda premium
Click to expand...
Click to collapse
Send it too Flashing He Needs One !!
If he can pm me his address ill mail it out Monday morning.
Sent from my HERO200 using xda premium
I'm actually in the process of getting one off of my employer, they lend out old refurbished phones they have in storage in case our personal phones need replacing or what not. I already submitted a report claiming my phone is having some problems, so hopefully by Tuesday I should have a hero again for a bit.
Most people go for some of the newer phones they have in stock but I asked for a hero specifically lol. They're really cool about trying to get you the phone you ask for and since no one asks for heros anymore I'm pretty sure they'll loan me one. =]
Thanks for the offer though griffin, if for some reason I don't get the phone I'll let you know to see if we can work something out.
Continuous boot loops currently. Doesn't even get far enough for a logcat
私のEVO 3Dから送信される
dastin1015 said:
Continuous boot loops currently. Doesn't even get far enough for a logcat
私のEVO 3Dから送信される
Click to expand...
Click to collapse
Have you checked the log of the flash process? Maybe there's something going wrong with the installation.
Do the following:
1. Flash rom
2. Right after the rom flashes start up an adb shell
3. followed by: cat /tmp/recovery.log > /sdcard/recovery.log
This will copy the recovery log to your sdcard. Check it to see if there's anything wrong with the installation. If everything looks correct then more than likely it's the kernel. I unfortunately have no experience with kernels, maybe jaybob will see this and help out?
I knew it'd be soon.....
self proclaimed XDA resident prick
ive been working on this off and on for a while, and ive finally managed to get SlimICS to boot!!!
unfortunatly there are many major bugs...the biggest one: Launchers are not working so i cant test any apps
the status bar is working and i managed to enter settings through the status bar and was able to connect to my wifi network, however i can not actually test the internet as i can not access any apps
now that i have it booting though i will be devoting alot more time to it...and it looks like theROMinator and i may be working together on this one so hopefully we should have a stableish version up soon!
well. nobody tryed before because we didn't have any kernel that supported ics.. i don't know if jt's or entropy source kernels will work...
jason4962 said:
well. nobody tryed before because we didn't have any kernel that supported ics.. i don't know if jt's or entropy source kernels will work...
Click to expand...
Click to collapse
Well im gonna attempt this method on a galaxy i9000 ics Rom today...actually i just finished my science project...i have three hours till my alarm goes off for me to get up...so i think ill just stay awake and see if i can make any progress...
Sent from my SAMSUNG-SGH-I997 using XDA
I heard its pretty easy to port aosp roms. This shows it lol. I may try it myself if it is reported working, makes getting aokp and others a lot easier.
That would be great. I am running slim on my captivate and really like it.
Sent from my SGH-I997 using Tapatalk 2
rxnelson said:
That would be great. I am running slim on my captivate and really like it.
Sent from my SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
Its definatly not as easy as it sounded...first they wernt flashing at all, i manged to get them to flash...but now it sends me to a boot loop. I tried to read the logcat to see what was causing the bootloop and to my suprise...logcat isnt working!!!! Ill definatly put more time into this though, i am determined to get it to at least boot up!!!! No ETA though, this is the first time ive ever ported a rom...maybe i shouldve ported some gingerbread roms before i tried porting ics...
Sent from my SAMSUNG-SGH-I997 using XDA
Just as a heads up, there is a aokp being tested at the moment. Has there been any other development on this topic?
Sent from my SGH-I997 using XDA
<-----currently testing aokp
Sent from my SGH-I997 using XDA
Still plugging in this? I think infuse users would like slim.
Sent from my Galaxy Nexus using Tapatalk 2
sorry guys, ive been grounded...so i don't have my phone so no progress has been made, as soon as i get my phone back ill continue to attempt this
and glad to here an aokp is in the works and being tested
A lot of ics roms are beginning to pop up...and Ive gotten slim ics to flash however it bootloops. But I'm pretty sure I know what the problem is and after I pick up my sister from school I'll get back to working on it...if I'm right on what's causing the bootloops then we may have another ics rom coming our way
mg2195 said:
A lot of ics roms are beginning to pop up...and Ive gotten slim ics to flash however it bootloops. But I'm pretty sure I know what the problem is and after I pick up my sister from school I'll get back to working on it...if I'm right on what's causing the bootloops then we may have another ics rom coming our way
Click to expand...
Click to collapse
mg, I made a build of SlimICS, however. I had bootloops too. Let's collaborate on this.
theROMinator said:
mg, I made a build of SlimICS, however. I had bootloops too. Let's collaborate on this.
Click to expand...
Click to collapse
i got it out of the bootloops!!!! but alot of stuff need fixing...i used the following guide to get it to where it is right now:
http://forum.xda-developers.com/showthread.php?t=1630237
wifi is connecting though cant really test it as the launcher that came with slim (ZEAM) isnt working) so i cant access any apps...i can get to setting through the status bar though and was able to connect to my wifi
gonna reboot and do some logcats and see if i can figure out whats going on
if you want, i can upload what i have and pm you a link if you want...get two guys working on the bugs at the same time
If you can get BT audio to work I am all up for helping with testing. Just need it because of local laws.
veener79 said:
If you can get BT audio to work I am all up for helping with testing. Just need it because of local laws.
Click to expand...
Click to collapse
unfortunatly this is being ported using entropys latest CM9( build so whatever doesnt work on that will not work on here...)
i doubt i could even come close to fixing bluetooth...but once this gets more stable i may look into it...but once again the chances of me getting bluetooth are very poor, pretty much impossible...even our best devs have been unable to get bluetooth to work :/
Are you guys building from source?
Sent from my SGH-I997 using xda premium
@Nun No, just base porting.
@mg Hmm, did you use the 3.6base or essentials download as a base?
Sent from my SGH-I997 using Tapatalk 2
If there was a source to build from...I could try to help you out.
Sent from my SGH-I997 using xda premium
NunHugger said:
If there was a source to build from...I could try to help you out.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Edit: this is the guys github:
https://github.com/krarvind
I'll look for it. Just curious, but why do you need source to help us port?
Sent from my SGH-I997 using Tapatalk 2
theROMinator said:
@Nun No, just base porting.
@mg Hmm, did you use the 3.6base or essentials download as a base?
Sent from my SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
i used both! what i did was this:
got entropys latest cm9, deleted the app, media, fonts, framework folders
then i replaced the deleted ones with the ones in the 3.6 base
i then took the i9000 3.6 essentials and instead of copying the folders i copied the files to the apropriate folders
i then flashed itthe reason it was bootlooping earlier was because it was missing the libandroid_runtime.so
the problem with the launcher is there is still some stuff from the /lib directory needed...flashed one with all the .so from lib and launcher shwed up however touch screen wasnt working...so now to go those logcats and see which lib i need
Lock/delete please
deleted
How to submit a bug.
When you submit a bug you want to make sure that nothing from your side is causing it.
Otherwise I might be hunting a bug which doesn't really exist.
The best way to achieve this is by doing the following.
Make a nandroid backup.
Perform a full wipe (factory reset + wipe /system)
Now we have two different ways depending on what kind of problem do you're having.
--When you're having a problem with a ROM function flash just the ROM without GAPPS etc. and boot back into the system. You will boot directly onto the homescreen.
--When you're having a problem with a 3rd party app in combination with our ROM then flash the ROM and GAPPS.
Boot now back into the system. You will boot to the setup wizard.
Log in to your Google account but make sure that you untick "Restore from my Google Account to this phone/tablet".
Finish the setup and open the playstore and download only the app you're having problems with.
Start a logcat recording and reproduce the bug (if possible more than once) while taking the logcat. If you don't know how to get a logcat read this tutorial or this.
Post the logcat in a txt file or on pastebin (this is important because you otherwise clog up the threads with your log) in the correct thread.
Please also write detailed how we can reproduce the bug.
Restore your backup from point 1 and wait for a fix (don't ask for ETAs).
Thank you I was trying to port carbon to the og EVO but wasn't working out I been wanting to run it ever since I ran it on my galaxy tab 2
Edit: for your download its says April its June crazy :thumbup:
Sent from my PC36100 using Tapatalk 2
Very nice Eric,ive never heard of this rom,love the look.
Damn man great work. I ran it for a couple of days from my own source build a few months ago. It was flaky and I never felt like working on it. Must say keep it up.
Sent from my PG86100 using xda app-developers app
FYI, installed A2SD, HammerSlammer, maxwoz GPS fix, and gapps 4.2.2 version at same time I flashed the rom. So far everything is running as expected. Haven't had much chance to play with it, but I'm sure someone is going to ask about your kernel and a2sd. Now to go finish chopping wood.
Very nice. Been running this off & on, on my Note 2 for months. Still running the copy for the evo that you sent me Eric, & it was awesome. Thank you.
Sent from my SPH-L900 using JellyBombed Tapatalk 2
g2435 said:
Thank you I was trying to port carbon to the og EVO but wasn't working out I been wanting to run it ever since I ran it on my galaxy tab 2
Edit: for your download its says April its June crazy :thumbup:
Sent from my PC36100 using Tapatalk 2
Click to expand...
Click to collapse
Excuse for the date..... I updated CM last night and I still had April on the brain from the cm initial release, I'll fix it.
Y'all enjoy. You're the reason I do this.
It was getting a little quiet in here. Downloading now, thanks Wambo!
Sent from my PC36100 using xda premium
This looks awesome! Thanks Wambo!
Sent from my PC36100 using xda premium
Amazing broski.
Sent from my EVO using Tapatalk 2
Is anyone else having issues with WiFi?
Never mind, a fresh install did the trick.
Sent from my PC36100 using xda premium
Running great so far!
Sent from my PC36100 using Tapatalk 2
clutterking said:
Running great so far!
Sent from my PC36100 using Tapatalk 2
Click to expand...
Click to collapse
I know.
Well F me running and run me F-ing... another awesome toy to try out..
Sent from my PC36100 using xda app-developers app
Wambo_Bomb said:
Aheeejd -- For initial testing and a2sd
Click to expand...
Click to collapse
You mention in the OP about a2sd testing, but when I went to terminal it said a2sd was not found. Should I flash it in recovery or is there an init.d issue?
chrisstl said:
You mention in the OP about a2sd testing, but when I went to terminal it said a2sd was not found. Should I flash it in recovery or is there an init.d issue?
Click to expand...
Click to collapse
A2SD works, but I did not include it. Init.d support is there as usual.
Wambo_Bomb said:
A2SD works, but I did not include it. Init.d support is there as usual.
Click to expand...
Click to collapse
Awesome! Thank you sir!
Wambo dude this ROM runs like a boss! It's like Slim Bean woke up and did some roids haha :thumbup::beer:
Sent from my PC36100 using xda premium