Database Info

Huawei Ideos Super FAQ

This is an FAQ for the Huawei Ideos as there have been many questions on how to do the same things. Hopefully this should help. There are other FAQs but this one tries to compile as many as it can into one FAQ.
Feel free to reply to this if there are any questions or if you want me to make any additions. The FAQ won't be complete to begin with but I will add as I get time.
One thing I will say is that I WON'T TAKE RESPONSIBITY IF YOU DAMAGE YOUR PHONE. I AM PROVIDING THE INFORMATION AND WILL TRY TO HELP YOU IF SOMETHING BAD HAPPENS BUT I CAN'T TAKE ANY RESPONSIBILITY
1. How to root the IDEOS
This can be done quite simply by adapting what quail wrote:
There is a couple away you can go about gaining root access with this phone I have tested all 3 ways but only had success with 2 of them.
a) You can download 'z4root' from here (WORKS)
b) Search the XDA forums for 'SuperOneClick' which requires mono to work on Linux. I have read people that have had success with 'SuperOneClick' but that was not the case for me. (HAVEN'T CHECKED)
c) My preferred method: (HAVEN'T CHECKED)
Prerequisite:
knowledge of Linux and Terminal
knowledge of ADB (guide available in forums)
I did all this using Debian (testing) 64bit, Android SDK.
Creating correct permissions to access the phone via USB:
i) create
Code:
/etc/udev/rules.d/51-android.rules
ii) in the file put
Code:
SUBSYSTEM=="usb", ATTR{idVendor}=="12d1", MODE="0666"
iii) then
Code:
chmod a+r /etc/udev/rules.d/51-android.rules
iv) restart udev or reboot
Downloading and/or Installing required software:
1) Downloading and installing the android-sdk from: developer.android.com/sdk/index.html
2) Downloading and extracting 'SuperOneClick' (you will only need these 5 files: rageagainstthecage, sqlite3, su, busybox and superuser.apk)
3) Copy rageagainstthecage, sqlite3, su, busybox and superuser.apk into the platform-tools directory of android-sdk. Put phone in debug mode.
4) From a terminal (command line) change to the android/platform-tools directory and carefully do these steps.
Check to see if adb can see your phone properly:
Code:
./adb devices
You should see the serial number of you device, if you see bunch of '?' you have done something wrong.
Now for the fun part rooting the phone: <= no phun intended hehe
Code:
./adb push rageagainstthecage /data/local/tmp/rageagainstthecage
Code:
./adb shell
Code:
cd /data/local/tmp
Code:
chmod 0755 rageagainstthecage
Code:
./rageagainstthecage
5) Now wait until you get kicked out from adb before you do the following:
Code:
./adb shell
If everything worked now you should see a "#" instead of the "$" you saw previously in the adb shell which means you shouldn't get "permission denied" in the following steps:
Code:
mount -o rw,remount /dev/block/mdtblock4 /system
Code:
exit
Code:
./adb push su /system/bin/su
Code:
./adb push busybox /system/bin/busybox
Code:
./adb push sqlite3 /system/bin/sqlite3
Code:
./adb push Superuser.apk /system/app/Superuser.apk
Code:
./adb shell
Code:
cd /system/bin
Code:
chmod 4755 su
Code:
chmod 4755 busybox
Code:
chmod 4755 sqlite3
Code:
./adb reboot
Now you should be able to use apps like 'Cache Cleaner NG', 'Root Explorer', 'SetCPU' etc that require root access to work correctly.
Enjoy​
2. How to flash the Ultrakiller Recovery Image
Now this has been covered many times but there have been a lot of problems with the BSOD on the IDEOS. A few days ago Ultrakiller came up with a solution that works regardless of the LCD type. Now this was distributed as an IMG file so many people were confused so here is a link to one with everything you need included. All I did was remove the amon'ra image and copied the Ultrakiller recovery IMG to the folder and edited the scripts to point to the new file.
After you download the file:
* Put your device in bootloader mode - turn it off, then press the power button while holding the 'Volume Down' and 'End (Red)' keys (Yes, bootloader is just the IDEOS logo) WHILE YOUR DEVICE IS PLUGGED IN
* WINDOWS - double click 'install-recovery-windows.bat'
* MAC - Open a terminal window to the directory containing the files, and type 'chmod +x install-recovery-mac.sh' followed by './install-recovery-mac.sh'
* LINUX - Open a terminal window to the directory containing the files, and type 'chmod +x install-recovery-linux.sh' followed by './install-recovery-linux.sh'​
See Q3 if you have Windows and the prompt hangs on "Waiting for Device"
3. How to solve problems with drivers on Windows in bootloader mode?
1. Unplug your phone
2. Download and install PDANet from here - at the end of the setup it will tell you to plug in your phone - do that
3. Put the phone into bootloader (See Q2 above)
4. Go to device manager and right click on "Android 1.0" and click "Update drivers"
5. Click "No, not this time" and Next
6. When it asks you where to look for drivers point it to PDANet's install location
7. Hopefully it should find the driver and prompt you to install it - it will take some time
8. You can now access your device in bootloader!​
Thanks to the following people:
Quail for the base of the guide and the ROM I'm using - it's amazing BTW
Ultrakiller for the recovery image
Changelog:
21/01/2010: Initial writeup
22/01/2010: Added Q3 and made some minor changes​

i unfortunately deleted a system app and upon restarting my phone it wont boot.....it keeps hanging at the startup and reboots.. help me how to system restore...

Hi - the Ultrakiller recovery IMG in the ZIP from the Link above is "Ultrakiller.img.img". Dunno if it didnt work cause of this - sry didnt test, just downloaded new Ultrakillers "UltraJack-Recovery_v4.6.2.img", saved into that folder and changed the .bat to "fastboot-windows.exe flash recovery UltraJack-Recovery_v4.6.2.img" and it worked for me Even superuser.apk didnt work for usb-root but z4root does it perfect and DroidExplorer showing files now .
Thanks so far to all investing their time here
P.S.: the HUAWEI background of Ultrakillers recovery is very delicious

General guide to Flash ROM
Can you please provide a detailed guide for flashing Huawei Ideos. Because it is super guide. So it must contain this topic also.
I want to flash official ROM on following link:
http://forum.xda-developers.com/wiki/index.php?title=Huawei_U8150_IDEOS
Waiting for your response

yrnehukuht said:
i unfortunately deleted a system app and upon restarting my phone it wont boot.....it keeps hanging at the startup and reboots.. help me how to system restore...
Click to expand...
Click to collapse
Dear have u find out the solution of this problem?? COZ im also suffering from this if u find it then plz tell me [email protected]

I have downloaded a rom from xda-developers wiki from this link
http://forum.xda-developers.com/wiki/index.php?title=Huawei_U8150_IDEOS
then updated my device software by going in to update mode(press vol up + end key + power button) .
This step returned me my original recovery.
But I am not going to recommend it bcoz i am facing problems like my cd drive which is automatically displayed has become inaccessible.
I am having problem to copy files to sd card.
My upgrade mode is not working now.
all these things were working immediately after the above mentioned process but I am now stuck with these things.
I think it is because i have flashed lower version number of rom on phone.
If you want to recover recovery mode only then I have successfully flashed UltraJack-Recovery 5.2.1 from this link
http://forum.xda-developers.com/showthread.php?t=860189&page=24
Inform about your progress

Thanx. Very useful

Hi guys. I am in a lot of trouble with my ideos.
Tried installing a custom ROm using ROM manager and it failed, although the original ROM is still there and its booting up and working perfectly.
However, when i try to boot into recovery, only the lit blackscreen shows.
I have tried everything from running ULTRAjack recovery on windows(which only shows 'waiting for device' on cmd, with the pdanet drivers installed) to ubuntu(which shows 'waiting for device' on Amon-ra recovery and permission denied on ULTRAjack).
Could it be i didnt root the device properly since i used z4 root?
Any more ideas?

900/2100 or 850/1700/1900/2100
Hello, How do I tell which sub-model my U8150 is please? Either HSDPA 900 / 2100 / AWS or HSDPA 850 / 1900 / 2100 / 1700. baseband = 22201003; build no.= U8150V100R001C183B825; IMEC = 355093040562676; IMEC-SV = 39.

Check out your fcc id suffix. I have heard there is a b version and a d version.

hi do flashing many roms affects my ideos mobile?

netskink said:
Check out your fcc id suffix. I have heard there is a b version and a d version.
Click to expand...
Click to collapse
All I got is a U8510-1, no letter... any thoughts?

Unlock u8150
Hello.
i have a T-Mobile Ideos u8150, also known as Comet.
it is locked to T-Mobile and requests a pin code when using another sim card.
is there a way to unlock the phone?
please help me...
thank you.

Enable USB Debugging & One Click Root with Unlock Root Tool

[q] hcl me u1

Can any one plz root this tablet...... M so depressed coz it doesn't include google play if it can be rooted....i could buy dis.....

successfully rooted HCL ME U1 Tablet
jeevan92ultimate said:
Can any one plz root this tablet...... M so depressed coz it doesn't include google play if it can be rooted....i could buy dis.....
Click to expand...
Click to collapse
This guide is successfully tested by me.
1. You need a 32 bit OS. (I have used 7 Pro x86).
2. Turn USB debugging ‘ON’ in settings of the tablet.
3. Download Superuser. Then extract the zip file to desktop :\ & you will see 2 folders as “System” and “Meta-INF”.
4. Download the drivers from here. Then connect the tablet & install the drivers using device manager.
5. Download SuperOneClick!. Extract the archive, go to the folder named ADB. Open an elevated command prompt there using this.
6. Continue with the following commands:
Code:
>adb root (you will see a message “adb is already running as a root”)
>adb devices (you should see your device number)
>adb shell (adb shell will run and daemon tool will also run) 7. Now restart the tablet & wait till the home screen appears. Now continue with the following commands:
Code:
>adb shell getprop ro.secure (output should be 0)
>adb shell mount -oremount,rw /dev/block/system /system
>adb push d:\system/bin/su /system/bin/
>adb push d:\system/bin/su /system/_install/bin/
>adb shell chmod 4777 /system/bin/su
>adb shell mount -oremount,ro /dev/block/system /system 8. Exit adb, disconnect the tab, restart it again.
9. Open the new Superuser app just once.
10. Download apks of BusyBox, Google Play & Titanium Backup (Google is your friend!!).
11. Install BusyBox first, then check the rooting status with Titanium Backup. After that, install Google Play.

Move your discussion into device forum.
If it doesn't have it, move it to Android Hacking and Development
Trolls, trolls everywhere

ppero196 said:
Move your discussion into device forum.
If it doesn't have it, move it to Android Hacking and Development
Trolls, trolls everywhere
Click to expand...
Click to collapse
Sorry, ppero196. OK

Karbonn A9 adb root (FINAL HOPE)

​
Requirements and rooting process
1 > Your pitiable unrooted Karbonn A9 Android device
2 > ADB drivers for your device installed on your pc (I used WinXP. You may use Win 7/Vista or the Linux distro of your choice)
3 > su , busybox , Superuser.apk
4 > A working linux distro with Nautilus (use a live usb stick of Ubuntu 11.04)
5 > Strength, courage and whatever makes you a man !!!!!
Rooting Process
To start, you must have adb installed on the OS of your choice.
I used my trusty WinXP system .
To confirm your device is properly detected, in the command prompt , run -
CODE -
adb devices
Now copy busybox, su, superuser.apk to /data/local/tmp/ using adb.
CODE -
adb push busybox /data/local/tmp
adb push su /data/local/tmp
adb push Superuser.apk /data/local/tmp
Now run adb shell .
CODE -
adb shell
Note that you see a "$" sign in the command prompt. That means you are not rooted . Next run the following commands in the shell to change permissions and get some limited privileges for the Superuser files:
CODE -
chmod 6755 /data/local/tmp/su
chmod 755 /data/local/tmp/busybox
chmod 644 /data/local/tmp/Superuser.apk
Note that the names of the files are case sensitive.
Done?
Turn off your Android device using the power button.
Now you need to reboot your system into a Linux distro which has Nautilus.
Android and Linux, having a similar heritage, makes it possible for us to get root access over the Android phone if you are running with root privileges within Linux. I used an Ubuntu 11.04 Live USB disk to save the hassle of installing another os.
When you have booted into Linux, open up terminal and type:
CODE -
sudo nautilus
This would open up the Nautilus file browser with root privileges.
Now put your Android device into Download mode . for the karbonn A9 the method is to hold down the Volume up button and simultaneously turn on the phone using the power on switch.
Once in download mode, connect the Android device using the microusb cable to the computer.
Now using the open Nautilus window, navigate to /UserData/local/tmp/ folder and verify that you have the files you sent to the device viz. su, busybox and Superuser.apk
Move/cut-paste su and busybox to /system/bin/ using Nautilus.
Move/cut-paste Superuser.apk to /system/app/ using Nautilus.
Now pull out the battery from your Android device.
Now simply turn on your device.
You must now have root.
Verify by running:
CODE -
adb shell
su
You'll note that the "$" prompt will turn into a "#" and you'll be prompted by a Superuser permission notification on your
device
WOOHOO !!!! YOU NOW HAVE ROOT ON YOUR PHONE !!!!
​

Important -
​1 > For all purposes, consider that your warranty will be void if you follow these steps
2 > I am not responsible for any loss, monetary or otherwise arising as a result of this article.
If you don't feel up to it, quit now and close this web page .
3 > I must assert that although I am aware of no reason why this should not work on *any* Android device, phone or tablet, I have only tested this on my GALAXY s3 .
4 > I have tried to explain it in the easiest way I can, but I must state here that this is by no means an easy task and you must persevere. If you can't follow the steps to the letter, its better you don't follow them at all and wait for a single click app for this or a custom rooted firmware.
​

RESERVED
reserved .......................

RESERVED
reserved .......................

Doesnt work,Already tried it a week ago.
THis technique doesnt work.I have already tried it a week ago.
here's the original link:
http://www.erodov.com/forums/how-root-any-android-device-manually/43325-page2.html
The problem is that nautilus just wont list our device's folders.
And download mode is opened by pressing Vol down + power for A9,
Vol up + Power opens fastboot.

[GUIDE] Asus fonepad 7 k012 - extSDCard write fix & hosts tweak - NO rooting

I wanna post this guide cuz i searched around and couldnt find any method for kitkat and lollipop, get full sd card write WITHOUT permanent ROOTING.
Some may say: just root, make changes with root file manager, and unroot from superSU. BUT, for this device, from what i experienced, the option for full uninstall/complete unroot, in superSU app, will just hang and do nothing .
I use IntelAndroid-FBRL 05-16-2015 Public Trail Release, made by @social-design-concepts - a really big thanks :good:.
http://forum.xda-developers.com/showpost.php?p=60770086&postcount=352
The tweaks may work on other intel based devices, when temporary CWM recovery is triggered.
Reboot tablet in fastboot/droidboot mode - vol+ and power until asus logo apears.
Install intel android drivers - there are over 8mb limit of .7z files, so i cant add them here, just search intelandroiddrvsetup1.1.5.zip.
Connect tablet to pc with usb cable.
Unzip IntelAndroid-FBRL-05-16-2015-PTR.7z from @social-design-concepts and enter launcher.bat
type ACCEPT after reading the warning
Now:
- chose T2 if u are using Kitkat
- chose T4 if u are using Lollipop
Tablet reboots and after some screen artefacts (is normal) you are in temporary CWM recovery, which has a temporary root adb shell.
Keep tablet connected to pc.
Now download ADBfolder.7z, decompress it, and open inside a command prompt/window.
In this window insert commands, each followed by enter:
adb devices
adb shell id
adb shell mount /system
adb shell mv /system/etc/hosts /system/etc/hosts.bak
adb push hosts /system/etc/hosts
adb shell chmod 0644 /system/etc/hosts
adb shell mv /system/etc/permissions/platform.xml /system/etc/permissions/platform.xml.bak
adb push platform.xml /system/etc/permissions/platform.xml
adb shell chmod 0644 /system/etc/permissions/platform.xml
adb shell reboot
The tweaks remain even after factory reset.
For removing the tweaks, in case of installing oficial updates through OTA or manual, trigger again temporary CWM recovery, enter ADB folder, open command window and use these commands, each followed by enter:
adb devices
adb shell id
adb shell mount /system
adb shell rm /system/etc/hosts
adb shell mv /system/etc/hosts.bak /system/etc/hosts
adb shell rm /system/etc/permissions/platform.xml
adb shell mv /system/etc/permissions/platform.xml.bak /system/etc/permissions/platform.xml
adb shell reboot
It can be done, for lazy ones , with pasting these commands in two .bat files (one for install, other for remove), but I wanted ppl to see what is actually happening.
You can use another hosts file, but keep in mind the /system has limited space, so large ones may not fit.

b0by said:
I wanna post this guide cuz i searched around and couldnt find any method for kitkat and lollipop, get full sd card write WITHOUT permanent ROOTING.
Some may say: just root, make changes with root file manager, and unroot from superSU. BUT, for this device, from what i experienced, the option for full uninstall/complete unroot, in superSU app, will just hang and do nothing .
I use IntelAndroid-FBRL 05-16-2015 Public Trail Release, made by @social-design-concepts - a really big thanks :good:.
http://forum.xda-developers.com/showpost.php?p=60770086&postcount=352
The tweaks may work on other intel based devices, when temporary CWM recovery is triggered.
Reboot tablet in fastboot/droidboot mode - vol+ and power until asus logo apears.
Install intel android drivers - there are over 8mb limit of .7z files, so i cant add them here, just search intelandroiddrvsetup1.1.5.zip.
Connect tablet to pc with usb cable.
Unzip IntelAndroid-FBRL-05-16-2015-PTR.7z from @social-design-concepts and enter launcher.bat
type ACCEPT after reading the warning
Now:
- chose T2 if u are using Kitkat
- chose T4 if u are using Lollipop
Tablet reboots and after some screen artefacts (is normal) you are in temporary CWM recovery, which has a temporary root adb shell.
Keep tablet connected to pc.
Now download ADBfolder.7z, decompress it, and open inside a command prompt/window.
In this window insert commands, each followed by enter:
adb devices
adb shell id
adb shell mount /system
adb shell mv /system/etc/hosts /system/etc/hosts.bak
adb push hosts /system/etc/hosts
adb shell chmod 0644 /system/etc/hosts
adb shell mv /system/etc/permissions/platform.xml /system/etc/permissions/platform.xml.bak
adb push platform.xml /system/etc/permissions/platform.xml
adb shell chmod 0644 /system/etc/permissions/platform.xml
adb shell reboot
The tweaks remain even after factory reset.
For removing the tweaks, in case of installing oficial updates through OTA or manual, trigger again temporary CWM recovery, enter ADB folder, open command window and use these commands, each followed by enter:
adb devices
adb shell id
adb shell mount /system
adb shell rm /system/etc/hosts
adb shell mv /system/etc/hosts.bak /system/etc/hosts
adb shell rm /system/etc/permissions/platform.xml
adb shell mv /system/etc/permissions/platform.xml.bak /system/etc/permissions/platform.xml
adb shell reboot
It can be done, for lazy ones , with pasting these commands in two .bat files (one for install, other for remove), but I wanted ppl to see what is actually happening.
You can use another hosts file, but keep in mind the /system has limited space, so large ones may not fit.
Click to expand...
Click to collapse
where can i get this ADBfolder.7z?

Problem using adb with Moto C

Hi, I'm having trouble choosing the right section, anyway..
After more than a year i managed to correctly install ADB drivers, because before i installed Google driver, when i noticed i must install Motorola driver , the removing of previous one did not successful done, so the Motorola one did not installed well, by manually removing files it succeed.
But now another annoying not previewed issue, i need to exchange a file in /system/etc both in my tablet and my Motorola moto C tel. , it needs to remount system part. in r/w but to do this need to restart adb as root but with 'adb root' this is the answer:
adbd cannot run as root in production builds
my system is 7.0, what can i do?

You can install a temporary root to run shell-commmands what require root-rights like mount in ADB:
Code:
adb devices
adb push <FULL-PATH-TO-SU-BINARY-ON-PC> /data/local/tmp/
adb shell "chmod +x /data/local/tmp/su"
adb shell "/data/local/tmp/su -c 'mount -o rw,remount,rw /system'"

I have two questions, i don't find any su command available in the net.
I don't understand how it is possible to have to do all these hard maneuvers with a debug tool, i think it might be simpler.. why there's a command remount or root if it doesn't work?