Related
Hi Everyone, I am new to the Android seen, I just switched from a Blackberry to the Galaxy S 4G. I am trying to load 64 bit drivers, and as you can imagin I am not having too much luck. when I try to load them I get a error. I am using Windows 7 Ultimate.
1: the errors i get is that it can't find drivers for-
PCI Simple comunications controller, and Universal Serial Bus (USB) controller.
2: the other problem I am having is simple understanding. How do you turn USB debugging mode on and off?
3:I downloaded supperoneclick and when it loads and I hit Root, It just hangs on (waiting for device) Probably because the USB drivers aren't loading correctly.
And yes I am a N00b, so please don't be to hard on me
Thanks For any help you can offer me. Tim.
Try downloading the 32bit. I had the same problem when I did it with the 64bit. To get debugging turned on go to the phone setting, applications, development it should be in there.
Sent from my SGH-T959V using XDA App
Ok I did what you said and I still have the PCI controller and USB controller fualts, but it loaded other drivers also which got it to work. I was able to root it with superoneclick, and I am somewhat happy now.
what does Rooting the phone do to it? what are the advantages?
now can I view, load and unload apps using my computer, and how would I do that?
Also can I view, load and unload music, video and other files using the computer aswell? and again how would I do that? Or if you could point me to a thread that explains all this that would be great aswell.
Thanks, Tim.
Ok I did what you said and I still have the PCI controller and USB controller fualts, but it loaded other drivers also which got it to work. I was able to root it with superoneclick, and I am somewhat happy now.
what does Rooting the phone do to it? what are the advantages?
now can I view, load and unload apps using my computer, and how would I do that?
Also can I view, load and unload music, video and other files using the computer aswell? and again how would I do that? Or if you could point me to a thread that explains all this that would be great aswell.
Thanks, Tim.
Click to expand...
Click to collapse
Search the development forums, for info on how to uninstall system apps, applying the fota fix, using Odin, etc.
Sent from my SGH-T959V using Tapatalk
The advantages of root are many. Mainly, you now have "superuser" privileges and access to all files and folders on your phone. This will allow you add or delete what you like and make many beneficial changes.
Just read these forums carefully and keep asking questions so you don't mess anything up. Have fun modding!
Sent from my SGH-T959V using XDA Premium App
Trying using.....
Try using the Vibrant 1's drivers worked for me!! Search the Samsung Vibrant section and you should be good to go ;0)
solrac.dc said:
Try using the Vibrant 1's drivers worked for me!! Search the Samsung Vibrant section and you should be good to go ;0)
Click to expand...
Click to collapse
This worked for me, I'm rooted
Hi All,
I just tried to connect my TF101 to an old WinXP box and got the error above when installing the driver from the Asus site, the solution after looking here was to install the Microsoft User Mode Driver Framework for WinXP here. I think this fix applies to all android devices but I figured it was worth a post if it saves some TF users from a long search.
Thank you for this, helped me fix it after searching around for 2 hours!
thanks heaps
You are a legend. Samsung should put this on their site. I couldnt get my Samsung Galaxy S II to connect, installing the Framework and then uninstall and driver and plug phoneback in then worked.
WORKED LIKE A CHARM!!!
POST THIS IN SAMSUNG WEBSITE
This driver package solves the Error code 28
for MTP device as samgung, then it works in Kies.
Hey thanks for the info +1
Thanks it works
equal or better file already installed on this computer
I get the same INF error when I try to hook up my video camera. I tried to download the file but received a message stating that I already have an equal or better one already. Obviously that is not correct because it is not working.
I am lost and can no longer put my videos from Panasonic Mini DV on my computer.
Any chance anyone knows how I can fix this..thanks!!
Gigsee, what operating system are you experiencing this on?
The help above is specifically for WinXP, it *may* be applicable to Vista also but will certainly not apply for a Win7 box because the usb driver stack is totally different there.
You'll have to help me out by giving step by step instructions of what your clicking and what your seeing at the time to pinpoint your problem and please be very specific with the wording of any errors your seeing.
Reply with something like;
1- click start> settings > control panel > system.
2 - open device manager tab.
George
Hi George - Thank you for taking the time to try to help me. I have an HP that is running on Vista Home.
I have tried to add the video camera several ways. One way is to open Movie Maker and add video camera. I also just hook the video camera up to the computer. I've tried a USB cord and HP told me I needed an IEEE 1394 cord, but that made no difference. I've tried going through the control panel to cameras and adding a camera. No matter how I try, it always does the same thing:
1) I plug in the USB cord. I instantly get this message: USB Device Not Recognized.
2) Control Panel; Scanners & Cameras; Add Device
3) I am sent to the Welcome to the Scanner and Camera Installation Wizard
4) Next; I have the box asking me if I want to select the manufacturer from the list (only my old printer is on the list) or to select that I have the manufacturer's disk
5) Have Disk
6) Message says to the Insert manufactures installation disk, which I do. It asks me to copy manufacture's files from:
7) I hit browse and change drive to E (since that is my disk drive).
8) A list of 6 files come up. Acrobat Reader, DV Studio3, USBDriver, ArcSoft, G726, AUTORUN
9) The acrobat, dv studio, arc soft all upload correctly. When I hit the USB Driver, it takes me to another screen that says DRIVERS. At this point, the file name gets automatically filled in as "AUTORUN.INF" When I click "OPEN" I get AUTORUN.INF File not found. Check the file name and try again.
note: It used to be that when I hooked up the camera to the computer, It would automatically detect it and try to connect with it. It was then that I got the error above about "A Service Installation section in this INF is invalid." Now, it doesn't even let me get that far.
I hope I was descriptive enough..thanks so much for trying to help me!!
Patti
I had the same issue with ASUS Transformer Prime TF201 connecting to WinXPSP2. Solution worked immediately. Thanks to original poster.
confirmed fixed issue with samsung vibrant! thank you
Hi !
I've got a Samsung Galaxy S2 SGH i777. I've been trying to connect it to my laptop ( now xp sp3 ) for a few weeks now.
I've tried almost everything :
-updated sp2 to sp3
-uninstall and reinstall drivers manually
-tried suggestions from android and xp forums : tried every connection mode, every usb port, code error 28 suggestions, .Net framework update , updated windows media player "mode", and some others ... even trying this Microsoft User Mode Driver Framework.
But no success. I've always had this annoying " A service installation section in this INF is invalid " message.
Until yesterday when I found this site and followed divadrummer 5 steps :
fixya.com/support/t221754-service_installation_section_in_inf
( as a knew member I cannot post outside links for a while - so you need to supplement the above line with the usual "stuff" like "www"
I've found the "inf" file in the windows hidden system.
Hope I could help .
Thank you very much!
Galaxy SII - MTP INF Issues
This is the EXACT issue I've been having. I'm thrilled to see it on XDA since I know there's so many competent people out there just brimming with eagerness to help me figure this out. (Or at least you're borderline willing)
Device: Samsung Galaxy SII Sprint SPH-D710 (i think)
OS: ICS
Computer: Dell Latitude d610
OS: XP SP3
As you know I connect my phone to the computer, it recognizes new hardware and attempts to install it. The only way to get the computer to recognize the phone in My Computer is by connecting as a digital camera and even then the VAST majority of my files are unavailable.
1. I installed the link provided by the original poster.
2. I uninstalled my phone by the device manager and in fact by removing the samsung phone drivers that I had earlier installed.
3. I then plugged my phone back into the computer.
4. I installed the Samsung drivers again
5. I allowed the "found new hardware to run its course.
6. I receive the attached screen shot with the error stating "An error occurred during the installation of your device. The required section was not found in the INF.
I have tried to follow the instructions above and I think the User Mode stuff sounds promising.
Next I attempted another fix at the link below:
fixya.com/support/t221754-service_installation_section_in_inf
The link had the following instructions: (Thanks Divadrummer)
"If the player is showing up in your Windows' Device Manager under "portable devices" with a yellow "!":
1.) Right-click the yellow "!" and choose "update driver".
2.) When given the option to connect to Windows Update, choose "no, not this time" and click next.
3.) Choose "Install from a specific location (advanced)" and click next.
4.) Choose "Don't search. I will choose the driver to install" and click next.
5.) Click the "Have Disk" button. Browse to C:\Windows\inf and choose the file marked "wpdmtp.inf"
I can't believe the generic players have such crappy support when so many people have this problem! I think the Windows file problem might be caused by "compressing old files" when you do a disk cleanup."
After doing as advised I found no wpdmtp.inf file. SO... I did what any amateur computer guy would do. I googled the file and downloaded it directly. I placed in in my INF directory and then tried to do step 5. I still experience the same error.
Suggestions and inquiries are welcome and encouraged.
Thank you in advance.
thanks
bstdnator said:
Hi All,
I just tried to connect my TF101 to an old WinXP box and got the error above when installing the driver from the Asus site, the solution after looking here was to install the Microsoft User Mode Driver Framework for WinXP here. I think this fix applies to all android devices but I figured it was worth a post if it saves some TF users from a long search.
Click to expand...
Click to collapse
I wasted an entire day scouring for a solution and yours was it!! I owe you alot!! I registered just to thank YOU!!:good:
I had XP w/ Gnex JB 4.1.1 and all I was doing was hitting walls. I tried more crap than you can imagine! Installed every driver scheme ever mentioned, installed WMP11, Installed SDK Manager.................
What a freakin' nightmare.:crying: And then, your suggestion with the MS framework. Worked instantly!! THANKS A MILLION!!
All day I screwed with this when I had not a second to waste on something like this. Why oh Why do I dig my heels in!!?? At least it worked!!
Absolute legend!
I've spent 3 days mucking around trying to connect my Galaxy S3 to connect to my Windows XP pc to no avail. 5 phonecalls to Samsung which did nothing. Read your post installed the driver you linked to and bam it's working.
Thank you Thank you Thank you. You have saved my sanity!
bstdnator said:
Hi All,
I just tried to connect my TF101 to an old WinXP box and got the error above when installing the driver from the Asus site, the solution after looking here was to install the Microsoft User Mode Driver Framework for WinXP here. I think this fix applies to all android devices but I figured it was worth a post if it saves some TF users from a long search.
Click to expand...
Click to collapse
this was an awesome cure. Helped me install my new Motorola Electrify M XT901. Keep up the good work!
I experienced same problem. but whe n updating new UMDF it says " an equivalent or newer version of UMDF is already installed on this system".
I tried to uninstall this old UMDF but I can't find it in the directory.
Please I need help.
not working for my xp system
and s3
Work on my htc one s Thx Bro :good:
Hi Friend,
I have rooted my Alcatel OT990 with Super One Click
The bigest problem for me was to find drivers
This is for those people who not have much experience about rooting n those who got tired of HSUSB drivers for Alcatel OT 990, here is simple solution.
Step 1: install PDANet to pc here is link http://junefabrics.com/android/
Step 2: While installing PDANet u ll get windows prompt...... click on Install Anyway
"
Step 3: During installation further u ll get a pop up saying..... Insure USB Debugging is On.... etc connect ur Phone n click on Yes (You must have turn on usb debugging in your phone for that go to settings > applications > development > Usb debugging)
Stup 4: Install SuperOneClick to your pc, Download SuperOneClick 1.9.5 (Later versions May NOT WORK!) Here is link http://www.4shared.com/zip/A-qwLIMw/Root_for_22OT-990.html
Step 5: Go to the Downloaded SuperOneClick folder,there will be a folder called "ADB" open it. There you will find 2 adb.exe files,one for Win 7,and one for Win XP.
Open your required file, it will show a command prompt window, Type "adb devices" and you should get something like 1234567890ABCDEF
If you get that,just close it.
Step 6: Now right click on Superoneclick icon and run as administrator.
Stup 7: Hit the Root button in superoneclick window and it will start rooting ur fone.
Step 8: while rooting it will ask u to.... Chek it by test Run.....press ok n ur phone is rooted ( To ensure u can c superuser app in your phones apps after rooting)
Dear Friends Now driver problem is already solved with this updated version of Alcatel Androidmanager download and install it from here http://www.alcatelonetouch.com/global-en/products/smartphones/ot-990.html
Hit thanks button If you like [/B]
Sent from my ALCATEL_one_touch_990 using XDA App
looks like you posted under the wrong device.
Yea, wrong device thread. But I clicked your thanks anyway for taking the effort to help part of the community.
sgood1971 said:
Yea, wrong device thread. But I clicked your thanks anyway for taking the effort to help part of the community.
Click to expand...
Click to collapse
Thanks dear friends, i am so sorry for posting wrong way, actualy i posted here with mistake.using xda app from phone n now i m unable to move it at correct place. Any can help out this?
Sent from my ALCATEL_one_touch_990 using XDA App
Wrong place, but it worked for me (although I had to stop the pda app on my phone in order for superoneclick to root it). I got titanium backup running which confirmed rootage, I may well have installed several virii on both my win7 netbook and my ot990 ( ), but at least I can delete some of the apps that I previously couldn't and can now work on install clockwork and a stock rom without all the apps I don't want on my phone but can't delete..
So thank you Mr/Ms Original Poster.
Worked like a charm!
THANK YOU!
megapload dosnt work
Hi ms28leo
please, reapload the drivers
this link dosnt work
megaupload.com/?d=9HFI2ODI
many thanks.
andor0 said:
Hi ms28leo
please, reapload the drivers
this link dosnt work
megaupload.com/?d=9HFI2ODI
many thanks.
Click to expand...
Click to collapse
Yes i did bro, thanks for mentioning
@ms28leo,
Virus found for SuperOneClick 1.9.5 @ 4shared[dot]com
Please explain that.
Tnx
It worked for me, thanks a lot m8!!
Thanks.
This is a great phone.
Thanks!
Just tried this out, and it works!
I'm going to buy a Galaxy Nexus soon, but this helps bridge the time. now I can remove some of the preinstalled apps, to save some of the extremely small amount of memory this phone has... still don't understand why they did that.
Can you please explain me when I root the phone what I get? And how can I move my instalation files on SD card. Thank you in front.
uhm.. i have alcatel ot-985n blaze.
I don't have an experience about rooting. Can you guys help me to root my phone?
I need to put other files to my sd card because I can't install some apps anymore with low internal memory.
thanks in advance! ;D
Hi guys this thread may be in the wrong place but I need help fast
I am creating an android application and I want to test it on my nexus 7 by viewing and interacting with what I have made however eclipse wont register that my device is plugged in (I have it in debug mode)
is there a step by step guide that I can follow
Thanks!!!!
cjaspire said:
Hi guys this thread may be in the wrong place but I need help fast
I am creating an android application and I want to test it on my nexus 7 by viewing and interacting with what I have made however eclipse wont register that my device is plugged in (I have it in debug mode)
is there a step by step guide that I can follow
Thanks!!!!
Click to expand...
Click to collapse
Make sure you have installed the USB drivers for Nexus 7 in your PC.
Hi there. I don't know if this the right place to ask my question but I couldn't find a section that seemed to fit my question. Sorry if it's the wrong place!
I have no experience with rooting devices but I wanted to try and install Android 7 on my Nexus 7 tablet so I watched a video on how to do it. I have successfully managed to install Android 7 and the tablet boots up and works fine but it refuses to connect to my PC.
I want to install the Google Play Store app but I can't get the apk file onto the tablet. I've tried e-mailing it to myself but the tablet won't save the file. What am I doing wrong?
Many thanks
Nicky
randomaccessmemory said:
Hi there. I don't know if this the right place to ask my question but I couldn't find a section that seemed to fit my question. Sorry if it's the wrong place!
I have no experience with rooting devices but I wanted to try and install Android 7 on my Nexus 7 tablet so I watched a video on how to do it. I have successfully managed to install Android 7 and the tablet boots up and works fine but it refuses to connect to my PC.
I want to install the Google Play Store app but I can't get the apk file onto the tablet. I've tried e-mailing it to myself but the tablet won't save the file. What am I doing wrong?
Many thanks
Nicky
Click to expand...
Click to collapse
Did you enable USB debug in the phone?
Secondly to install gapps on a custom ROM you need open gapps zip file
randomaccessmemory said:
Hi there. I don't know if this the right place to ask my question but I couldn't find a section that seemed to fit my question. Sorry if it's the wrong place!
I have no experience with rooting devices but I wanted to try and install Android 7 on my Nexus 7 tablet so I watched a video on how to do it. I have successfully managed to install Android 7 and the tablet boots up and works fine but it refuses to connect to my PC.
I want to install the Google Play Store app but I can't get the apk file onto the tablet. I've tried e-mailing it to myself but the tablet won't save the file. What am I doing wrong?
Many thanks
Nicky
Click to expand...
Click to collapse
For the connecting to PC, it sounds to me like you're not opening USB options to enable MTP when you connect the device to PC.
As,for the app not saving from your email. Go to system settings>applications>(your email app), open the app info for your email app, then tap the permissions option, then enable permission to storage.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE