Database Info

[Q] Help!

I tired to flash a rom and now it just goes to HTC says something about development and don't redistribute and repeats. Please help.

voltarian said:
I tired to flash a rom and now it just goes to HTC says something about development and don't redistribute and repeats. Please help.
Click to expand...
Click to collapse
Which firmware are u on? 2.20 if yes then did u flash boot.img from rom before u flash the ROM?
---------- Post added at 12:17 AM ---------- Previous post was at 12:06 AM ----------
"If you have the newer HBOOT 1.14 (you probably do if coming from stock 2.20), boot.img's will have to be flashed separately via fastboot. Extract the boot.img from you ROM zip of choice and put it in the same directory as fastboot. Reboot your device into boot loader and run "'fastboot flash boot boot.img' (no quotes)
You can then flash the ROM" - thanks to
Guylncognito721
How to flash Custom Recovery and ROM after 2.20 root - http://forum.xda-developers.com/showthread.php?p=33179690

abhipati said:
Which firmware are u on? 2.20 if yes then did u flash boot.img from rom before u flash the ROM?
---------- Post added at 12:17 AM ---------- Previous post was at 12:06 AM ----------
"If you have the newer HBOOT 1.14 (you probably do if coming from stock 2.20), boot.img's will have to be flashed separately via fastboot. Extract the boot.img from you ROM zip of choice and put it in the same directory as fastboot. Reboot your device into boot loader and run "'fastboot flash boot boot.img' (no quotes)
You can then flash the ROM" - thanks to
Guylncognito721
How to flash Custom Recovery and ROM after 2.20 root - http://forum.xda-developers.com/showthread.php?p=33179690
Click to expand...
Click to collapse
Yes..and no...

Didn't work, wouldn't reboot into recovery, after the reboot it just goes back to the boot screen with "This build is for development purposes only. Do not distrubute outside of HTX without HTC's written permission. Failure to comply may lead to legal action."
Edit:
Nevermind, think I got it to work, thanks so very much!

Nevermind...still getting that same thing..

voltarian said:
Nevermind...still getting that same thing..
Click to expand...
Click to collapse
Flash the boot IMG. From fastboot after u flash Rom.....

omario8484 said:
Flash the boot IMG. From fastboot after u flash Rom.....
Click to expand...
Click to collapse
I was thinking, the ROM I tried to get was http://www.eternityproject.eu/topic/158-jellybean-eternityprojects-cyanogenmod-10-for-htc-one-x/ and the problem happened when I got the kernel.., I'm going to try again and flash the boot.img in.

voltarian said:
I was thinking, the ROM I tried to get was http://www.eternityproject.eu/topic/158-jellybean-eternityprojects-cyanogenmod-10-for-htc-one-x/ and the problem happened when I got the kernel.., I'm going to try again and flash the boot.img in.
Click to expand...
Click to collapse
Remember there is a international one x and our one xl huge difference stay in this forum for roms...u don't want a hard bricked phone.... Grab a Rom from our forum wipe data and all that good stuff. Flash Rom flash boot img

omario8484 said:
Remember there is a international one x and our one xl huge difference stay in this forum for roms...u don't want a hard bricked phone.... Grab a Rom from our forum wipe data and all that good stuff. Flash Rom flash boot img
Click to expand...
Click to collapse
Thank you so much for the help, finally working again. Thanks again.

[Q] Root Question (Att Htc One X)

Hey Guys, I just ran the the x factor exploit on the 2.20 firmware, I was able to gain the temp root and unlock the bootloader through htdev.com and Installed the TWRP recovery but I still cannot get root access? I tried to flash Supersu through recovery but it keeps failing ? Any help would be appreciated! Thank you. Also I was able to flash a rom before i tried running supersu but the phone kept getting stuck in a bootloop.

gurshajs said:
Hey Guys, I just ran the the x factor exploit on the 2.20 firmware, I was able to gain the temp root and unlock the bootloader through htdev.com and Installed the TWRP recovery but I still cannot get root access? I tried to flash Supersu through recovery but it keeps failing ? Any help would be appreciated! Thank you. Also I was able to flash a rom before i tried running supersu but the phone kept getting stuck in a bootloop.
Click to expand...
Click to collapse
U have to flash IMG through fastboot when u flash a Rom or you'll be stuck in a bootloop

omario8484 said:
U have to flash IMG through fastboot when u flash a Rom or you'll be stuck in a bootloop
Click to expand...
Click to collapse
How can i do that? I had the Htc desire hd flashing roms was so much easier on there, I cant figure out how to work with IMG?

gurshajs said:
How can i do that? I had the Htc desire hd flashing roms was so much easier on there, I cant figure out how to work with IMG?
Click to expand...
Click to collapse
Yeah I had the inspire 4g too and it was awesome.... But since your on the new hboot you have the flash the boot IMG after flashing the Rom through fastboot...you can downgrade your hboot after flashing your first Rom ... Your going to need to have some simple command prompt commands to do this one sec ill post them here in a sec
---------- Post added at 05:33 PM ---------- Previous post was at 05:31 PM ----------
Take a look here .... http://forum.xda-developers.com/showthread.php?t=1754018

omario8484 said:
Yeah I had the inspire 4g too and it was awesome.... But since your on the new hboot you have the flash the boot IMG after flashing the Rom through fastboot...you can downgrade your hboot after flashing your first Rom ... Your going to need to have some simple command prompt commands to do this one sec ill post them here in a sec
---------- Post added at 05:33 PM ---------- Previous post was at 05:31 PM ----------
Take a look here .... http://forum.xda-developers.com/showthread.php?t=1754018
Click to expand...
Click to collapse
Thank you so much! Ill give it a shot right now, Thanks again! and The inspire was a great phone!

gurshajs said:
Thank you so much! Ill give it a shot right now, Thanks again! and The inspire was a great phone!
Click to expand...
Click to collapse
So I downloaded the files and got the boot img from the rom im goign to be flashing, how exactly do i flash the img?

gurshajs said:
So I downloaded the files and got the boot img from the rom im goign to be flashing, how exactly do i flash the img?
Click to expand...
Click to collapse
See here: http://forum.xda-developers.com/showthread.php?t=1952076

redpoint73 said:
See here: http://forum.xda-developers.com/showthread.php?t=1952076
Click to expand...
Click to collapse
I did that but my phone wont enter the recovery after i flashed the IMG it just keeps restarting on the htc screen ? (the htc development screen before you enter the recovery)

What ROM are you trying to flash?

[Q] [SOLVED] Factory reset got stuck on htc logo- htc pico rooted

Dear Developers
I accidentally pressed factory reset in boot mode and it got stuck on HTC logo on white screen.
I do not know what to do...........?
I also can not access HBOOT/FASTBOOT
Please Help I m in emergency situation....

try it...
Jst remove nd replace yur battery nd plugin yur chrger...if lucky yu will go to recovery mod....then wipe data nd flash any rom...otherwise wait fr any expertise advice....plzzz thnk me if i helpd....

gauravrai said:
Dear Developers
I accidentally pressed factory reset in boot mode and it got stuck on HTC logo on white screen.
I do not know what to do...........?
I also can not access HBOOT/FASTBOOT
Please Help I m in emergency situation....
Click to expand...
Click to collapse
Ohh hard brick
Go to recovery wipe everything
Flash a rom
I think u have have to reflash ruu to fix hboot
Sent from my HTC Explorer A310e using xda premium

if you can get into recovery -
1. wipe everything (all partitions, dalvik cache, battery stats, etc)
2. mount usb storage. download jaggy rom and put it on to the sd card.
3. flash the rom, it will boot up fine.
4. reboot to recovery. wipe everything again.
5. reboot to bootloader (in twrp) if on yannou, just pull out the battery, put it in and keep holding volume down and power till you get the fastboot menu.
6. get into fastboot mode, connect phone to PC, run the proper RUU for your device.
if you can't get into recovery -
fastboot boot <recovery name>.img. Preferably use a twrp recovery.

thanks for suggestion bros
i flashed new rom cm9 mod

salil_1337 said:
if you can get into recovery -
1. wipe everything (all partitions, dalvik cache, battery stats, etc)
2. mount usb storage. download jaggy rom and put it on to the sd card.
3. flash the rom, it will boot up fine.
4. reboot to recovery. wipe everything again.
5. reboot to bootloader (in twrp) if on yannou, just pull out the battery, put it in and keep holding volume down and power till you get the fastboot menu.
6. get into fastboot mode, connect phone to PC, run the proper RUU for your device.
if you can't get into recovery -
fastboot boot <recovery name>.img. Preferably use a twrp recovery.
Click to expand...
Click to collapse
Waht if i want my T-Mobile RUU .. which im not able to find ? :/ .. i want my T-Mobile RUU n want to flash ?
---------- Post added at 03:17 AM ---------- Previous post was at 03:15 AM ----------
gauravrai said:
i flashed new rom cm9 mod
Click to expand...
Click to collapse
get CM10 B6 ... Jelly Bean + smooth rom n flash Pandora V1 Kernel for fixing wifi probs .. Pandora Works with CM9 too .. but my Advice switch to CM10 B6 ..

mrroks said:
Waht if i want my T-Mobile RUU .. which im not able to find ? :/ .. i want my T-Mobile RUU n want to flash ?
---------- Post added at 03:17 AM ---------- Previous post was at 03:15 AM ----------
get CM10 B6 ... Jelly Bean + smooth rom n flash Pandora V1 Kernel for fixing wifi probs .. Pandora Works with CM9 too .. but my Advice switch to CM10 B6 ..
Click to expand...
Click to collapse
CM10b6 is really a very smooth rom for pico. Even wifi toggel works great but my only concern is headset detection. Used this rom for a week but due to headset problem but had changed after.
Sent from my HTC Explorer A310e using xda premium

gauravrai said:
CM10b6 is really a very smooth rom for pico. Even wifi toggel works great but my only concern is headset detection. Used this rom for a week but due to headset problem but had changed after.
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
yah.. only one pRob.

how can it be so stuck??
Which menu in which you use the factory reset??
supposed that after the root, factory reset via CWM

mrroks said:
Waht if i want my T-Mobile RUU .. which im not able to find ? :/ .. i want my T-Mobile RUU n want to flash ?
---------- Post added at 03:17 AM ---------- Previous post was at 03:15 AM ----------
get CM10 B6 ... Jelly Bean + smooth rom n flash Pandora V1 Kernel for fixing wifi probs .. Pandora Works with CM9 too .. but my Advice switch to CM10 B6 ..
Click to expand...
Click to collapse
What are the versions for the software on your device ? radio, baseband etc ?

salil_1337 said:
What are the versions for the software on your device ? radio, baseband etc ?
Click to expand...
Click to collapse
Radio: 1.10.80.13M2 .

mrroks said:
Radio: 1.10.80.13M2 .
Click to expand...
Click to collapse
http://www.mediafire.com/download/l....09H_1.10.80.13M2_R_release_225270_signed.exe
This is the non T-mobile, WWE East Europe ROM with the same radio, or you could just get the latest RUU and flash it. I am not able to find the one modded by T-mobile. But are there any T-mobile specific services or apps that you want to use that were present on the phone when you got it first ? If not, this should do it for you.

salil_1337 said:
http://www.mediafire.com/download/l....09H_1.10.80.13M2_R_release_225270_signed.exe
This is the non T-mobile, WWE East Europe ROM with the same radio, or you could just get the latest RUU and flash it. I am not able to find the one modded by T-mobile. But are there any T-mobile specific services or apps that you want to use that were present on the phone when you got it first ? If not, this should do it for you.
Click to expand...
Click to collapse
well non T-mobile RUU i also have ... n Yeah i had T-Mobile apps T-mobile HTC Scene .. T-Mobile Bootanimations , Ringtones n etc ?? wat to do ?

mrroks said:
well non T-mobile RUU i also have ... n Yeah i had T-Mobile apps T-mobile HTC Scene .. T-Mobile Bootanimations , Ringtones n etc ?? wat to do ?
Click to expand...
Click to collapse
sorry bro, I can't find the T-mobile specific ROM. Since you already have your phone running, and if you desparately want to switch back to the T-mobile ROM, you can always flash that RUU and take it to them and tell them that you just want the software updated. I don't think they will care about the phone being rooted as the service center guys will. I might be wrong though. Doesn't hurt to ask, does it ?

salil_1337 said:
sorry bro, I can't find the T-mobile specific ROM. Since you already have your phone running, and if you desparately want to switch back to the T-mobile ROM, you can always flash that RUU and take it to them and tell them that you just want the software updated. I don't think they will care about the phone being rooted as the service center guys will. I might be wrong though. Doesn't hurt to ask, does it ?
Click to expand...
Click to collapse
Prob is im living in pak .. theres no T-Mobile here ... well never mind .. i have CWM Backup of this rom the prob is its rooted .. n i want to do a factory reset ,, ? any chances ? ive tried factory rest but stuck at HTC screen

Similar problem!!
hey guys.
accediently i did a factory reset of my rooted HTC explorer.
now the problem is i cannot go to recovery.
although i can go to fastboot and hboot, but when i click on recovery i see HTC logo and then a black screen flashed (like that of CWM recovery) and phone is powered off.
i tried to flash the recovery again but no sucess..
also i tried to restore with RUU but still no sucess. ( i read some where that RUU works with bootloader locked but i cannot lock it)
i also tried to install TWRP recovery but i failed again.
please help me unbrick my phone..

mrroks said:
Prob is im living in pak .. theres no T-Mobile here ... well never mind .. i have CWM Backup of this rom the prob is its rooted .. n i want to do a factory reset ,, ? any chances ? ive tried factory rest but stuck at HTC screen
Click to expand...
Click to collapse
factory reset on pico after being rooted will give you a bootloop. DO NOT factory reset a rooted phone.
---------- Post added at 08:59 PM ---------- Previous post was at 08:51 PM ----------
taimoor tariq said:
hey guys.
accediently i did a factory reset of my rooted HTC explorer.
now the problem is i cannot go to recovery.
although i can go to fastboot and hboot, but when i click on recovery i see HTC logo and then a black screen flashed (like that of CWM recovery) and phone is powered off.
i tried to flash the recovery again but no sucess..
also i tried to restore with RUU but still no sucess. ( i read some where that RUU works with bootloader locked but i cannot lock it)
i also tried to install TWRP recovery but i failed again.
please help me unbrick my phone..
Click to expand...
Click to collapse
I assume your bootloader is unlocked, since you say so. You don't need to flash a recovery for it to work. You can just boot a recovery image and do your stuff.
1) run "fastboot devices" command. See if it spits out your device. If it does, your phone's in fastboot mode.
2) run "fastboot boot <recovery image name>.img". This will reboot your phone directly into the recovery where you can play around.
I assume again that one of your partitions has been corrupted just like mine had. So just as a safety measure use cute_prince's nand recovery method. Wipe everything from recovery, and reboot your phone. You should be able to flash stuff, and lock your bootloader normally. Then run the RUU.
NOTE : BOOTLOADER MUST BE LOCKED BEFORE FLASHING RUU.
Hope this helps. Reply back if you run into any other problems. Will try to help you as much as I can. And as far as flashing a ROM goes, I would stay away from CM10 beta 6 and all sense 4.0 / 4.0a ROMS as I have faced nand burns with them.

HTC Explorer Stuck on HTC logo
I accidentally pressed factory reset in boot mode and it got stuck on HTC logo on white screen.
I do not know what to do...........?
When i instal new rom .it shows instalation Aborted....Plz Help me........

Rajesh23 said:
I accidentally pressed factory reset in boot mode and it got stuck on HTC logo on white screen.
I do not know what to do...........?
When i instal new rom .it shows instalation Aborted....Plz Help me........
Click to expand...
Click to collapse
Try out this method it might solve ur prob ..
!!!DO NOT RELOCK the bootloader before Step 4 - this will brick your phone!!!
1. download RUU for your device here (check your radio at top the bootloader menu)
2. extract the RUU rom from RUU application
start the ruu application, even if it fails. also start the flashing process, nothing will happen here. search for the ruu logs, for me at c:\ruu_log. in the log (for me in line 191) is the path to the rom.zip that should get flashed. something in temp folder... for me the line looks like this:
"<T093343><DEBUG><CMD>fastboot -s HT1BMVMXYZ flash zip C:\users\raangu\AppData\Local\Temp\{1235}\{12345}\ rom.zip</CMD></DEBUG></T093343>"
3. flash the needed images
in the rom.zip you will find a boot_signed.img, a system.img and a recovery_signed.img. flash all these images with fastboot.
In command line:
fastboot flash system system.img
fastboot flash boot boot_signed.img
fastboot flash recovery recovery_signed.img
4. relock the bootloader
In command line:
fastboot oem lock
5. install with RUU application
now run the RUU application again and follow the instructions.
You are back on RUU now!

salil_1337 said:
factory reset on pico after being rooted will give you a bootloop. DO NOT factory reset a rooted phone.
---------- Post added at 08:59 PM ---------- Previous post was at 08:51 PM ----------
I assume your bootloader is unlocked, since you say so. You don't need to flash a recovery for it to work. You can just boot a recovery image and do your stuff.
1) run "fastboot devices" command. See if it spits out your device. If it does, your phone's in fastboot mode.
2) run "fastboot boot <recovery image name>.img". This will reboot your phone directly into the recovery where you can play around.
I assume again that one of your partitions has been corrupted just like mine had. So just as a safety measure use cute_prince's nand recovery method. Wipe everything from recovery, and reboot your phone. You should be able to flash stuff, and lock your bootloader normally. Then run the RUU.
NOTE : BOOTLOADER MUST BE LOCKED BEFORE FLASHING RUU.
Hope this helps. Reply back if you run into any other problems. Will try to help you as much as I can. And as far as flashing a ROM goes, I would stay away from CM10 beta 6 and all sense 4.0 / 4.0a ROMS as I have faced nand burns with them.
Click to expand...
Click to collapse
i didn't understand.
please explain a bit more.
i cant understand how to run fastboot devices command.

Recovery and H-Boot

Hello, first of all I'm a super newbie on this A have a bunch of questions.
-I tried to root my HTC evo 3d 3 or 4 days ago and i did it without any issues. Then installed Cyanogen Mod 10.4 (jellybean) on my device. Now i want to update it to Cyanogen Mod 11. Does it woth it? or should I stay in my current version.
-I read the threat about Cyanogen Mod 11, it seems i need to install TWRP first, my current recovery mod is ClockworkMod v6.0.0.0. Is there anything else before i install TWRP or can I just downlaod it and then install like Clockwork?
My H-Boot is 1.49.9999
Radio 11.25.3504.06_11
OpenDSP-v02v6v0v2226v00v0202
eMMC-boot
S-Off

Kulleteyn said:
Hello, first of all I'm a super newbie on this A have a bunch of questions.
-I tried to root my HTC evo 3d 3 or 4 days ago and i did it without any issues. Then installed Cyanogen Mod 10.4 (jellybean) on my device. Now i want to update it to Cyanogen Mod 11. Does it woth it? or should I stay in my current version.
-I read the threat about Cyanogen Mod 11, it seems i need to install TWRP first, my current recovery mod is ClockworkMod v6.0.0.0. Is there anything else before i install TWRP or can I just downlaod it and then install like Clockwork?
My H-Boot is 1.49.9999
Radio 11.25.3504.06_11
OpenDSP-v02v6v0v2226v00v0202
eMMC-boot
S-Off
Click to expand...
Click to collapse
Did you flash your recovery via fastboot? Easiest way to flash TWRP 2.7 will be using "flashify" from the play store. it has got a built in feature to download the right recovery for your phone, and automatically flash it after download
May be you just read the (whole) thread about your suggested rom before installing it "blind"

LS.xD said:
Did you flash your recovery via fastboot?
Click to expand...
Click to collapse
yes, i flash it via fastboot

LS.xD said:
Easiest way to flash TWRP 2.7 will be using "flashify" from the play store. it has got a built in feature to download the right recovery for your phone, and automatically flash it after download
Click to expand...
Click to collapse
That was the magic touch Thanks a lot...

Kulleteyn said:
That was the magic touch Thanks a lot...
Click to expand...
Click to collapse
Always a pleasure for me to help other phone-junkies

LS.xD said:
Always a pleasure for me to help other phone-junkies
Click to expand...
Click to collapse
Helo, its me again
I tried the flashify, i was just able to flash TWRP 2.7 on my phone. But i need 2.6.3.0 (or any other recovery with SELinux support)
but cant downlaod it via flashify. So i downloaded it manually and tried to flash by using cmd and fastboot. Then I just get the "too many links" error. Can't fix it, cant find a solution that works on me..

Kulleteyn said:
Helo, its me again
I tried the flashify, i was just able to flash TWRP 2.7 on my phone. But i need 2.6.3.0 (or any other recovery with SELinux support)
but cant downlaod it via flashify. So i downloaded it manually and tried to flash by using cmd and fastboot. Then I just get the "too many links" error. Can't fix it, cant find a solution that works on me..
Click to expand...
Click to collapse
TWRP 2.7.0.0 is first version provides NATIVE full SELinux support. You can also download it and flash it via flashify by manually selecting the .img file.
I'm gonna look whats up with the .2.7.
You're gonna to flash KitKat ??
SO HOLD ON PLS
Dou have GSM or CDMA version?

35698899161
LS.xD said:
TWRP 2.7.0.0 is first version provides NATIVE full SELinux support. You can also download it and flash it via flashify by manually selecting the .img file.
I'm gonna look whats up with the .2.7.
You're gonna to flash KitKat ??
SO HOLD ON PLS
Dou have GSM or CDMA version?
Click to expand...
Click to collapse
Interesting... Yes i wanna flash KitKat and I have te GSM version. Tried to flash the rom vith 2.7 but got this error "E: Error executing updater binary in zip" and "Error flashing zip"

Kulleteyn said:
Interesting... Yes i wanna flash KitKat and I have te GSM version. Tried to flash the rom vith 2.7 but got this error "E: Error executing updater binary in zip" and "Error flashing zip"
Click to expand...
Click to collapse
For your EVO 3d (?!) there is already 2.7.0.1 --> http://techerrata.com/file/twrp2/shooteru/openrecovery-twrp-2.7.0.1-shooteru.img
btw do you have the latest HBOOT in in the CM11 thread a hboot version recommended??

LS.xD said:
For your EVO 3d (?!) there is already 2.7.0.1 --> http://techerrata.com/file/twrp2/shooteru/openrecovery-twrp-2.7.0.1-shooteru.img
btw do you have the latest HBOOT in in the CM11 thread a hboot version recommended??
Click to expand...
Click to collapse
Tried 2.7.0.1 too
in this thread, i saw that post http://forum.xda-developers.com/showpost.php?p=51278107&postcount=425
so i didnt try to update HBoot.. may i try it?

Kulleteyn said:
Tried 2.7.0.1 too
in this thread, i saw that post http://forum.xda-developers.com/showpost.php?p=51278107&postcount=425
so i didnt try to update HBoot.. may i try it?
Click to expand...
Click to collapse
better try install 2.7.0.1 and download rom again, may be its corrupted.
---------- Post added at 04:54 PM ---------- Previous post was at 04:15 PM ----------
Kulleteyn said:
Tried 2.7.0.1 too
in this thread, i saw that post http://forum.xda-developers.com/showpost.php?p=51278107&postcount=425
so i didnt try to update HBoot.. may i try it?
Click to expand...
Click to collapse
There is written "youre fine as is" but feel free to, have you tried another kitkat rom?

LS.xD said:
better try install 2.7.0.1 and download rom again, may be its corrupted.
---------- Post added at 04:54 PM ---------- Previous post was at 04:15 PM ----------
There is written "youre fine as is" but feel free to, have you tried another kitkat rom?
Click to expand...
Click to collapse
Just tried the Liqui Smooth now and got the same problem. :/

Kulleteyn said:
Just tried the Liqui Smooth now and got the same problem. :/
Click to expand...
Click to collapse
Did you perform a FULL WIPE before flashing?

LS.xD said:
Did you perform a FULL WIPE before flashing?
Click to expand...
Click to collapse
yes, wiped all except sd cards..

Kulleteyn said:
yes, wiped all except sd cards..
Click to expand...
Click to collapse
OK, is your deviced branden? May be got it through a special provider? Or us it an unbranden model?
Found possible fix! First install UpdateSuperSu1.93.zip AND then install suggested rom.

LS.xD said:
OK, is your deviced branden? May be got it through a special provider? Or us it an unbranden model?
Click to expand...
Click to collapse
its branden, as i said before, i was able to flash cyanogen mod 10.1 (jelly bean), i had no issues while i flash it.

LS.xD said:
Found possible fix! First install UpdateSuperSu1.93.zip AND then install suggested rom.
Click to expand...
Click to collapse
Ok, i'll try it now

LS.xD said:
OK, is your deviced branden? May be got it through a special provider? Or us it an unbranden model?
Found possible fix! First install UpdateSuperSu1.93.zip AND then install suggested rom.
Click to expand...
Click to collapse
Still the same... cant figure out where i am wrong.

Kulleteyn said:
Ok, i'll try it now
Click to expand...
Click to collapse
If that doesn't work its getting a little complicated. Means you have to install a <4.4 rom and install 4ext updater (installs 4ext recovery) from plystore and then you ca install >4.4.
Updating HBOOT will not help!

LS.xD said:
If that doesn't work its getting a little complicated. Means you have to install a <4.4 rom and install 4ext updater (installs 4ext recovery) from plystore and then you ca install >4.4.
Updating HBOOT will not help!
Click to expand...
Click to collapse
Still not be able to flash cyanogenmod 11 but it worked fine with Liquid Smooth mod Thanks a lot again, you're so patient..

[Q] Back to stock recovery B137SP03 without recovery image

Hello all,
I have been going slightly mad today trying to get my mate 7 2GB back from CWM to stock recovery. The main problem is that I do not have a stock recovery image. But after being shown where to find one, I noticed that I could not get it successfully flashed either.
Since I do not really know how to do this, I used flashify, but that did not work and either returned me to the CWM or sent me to rescue.
Can someone help me to a) get a stock recovery image for the Mate 7 version MT7-L09 and b) show me how to properly flash it?

Find stock recovery is easy.. only a question why flashify don't work for you? It work fine for me... your device is rooted?

djzero86 said:
Find stock recovery is easy.. only a question why flashify don't work for you? It work fine for me... your device is rooted?
Click to expand...
Click to collapse
Hi @dzjero86, my device is rooted and I am on the B137SP03 version atm, using CWM. Don't know why Flashify is not working for flashing a recovery image. It works fine to flash a CWM recovery. Maybe I have the wrong stock recovery... If you can find it, can you send me the link or add it as an attachment here?

Please guys help me to . i have that same problem i have been trying to flash the stock recovery again but i couldn't even with flashify after i flash i takes me to bootloader screen and it shows me a fun_error message
I have a tl-10 device

dekraan said:
Hi @dzjero86, my device is rooted and I am on the B137SP03 version atm, using CWM. Don't know why Flashify is not working for flashing a recovery image. It works fine to flash a CWM recovery. Maybe I have the wrong stock recovery... If you can find it, can you send me the link or add it as an attachment here?
Click to expand...
Click to collapse
A way to find the stock recovery is : download the whole B137SP03 Rom from the Huawei site , and use a tool called "Firmware unpacker for Huawei" whit this tool you can extract the recovery.img from the Rom and try to flash it using flashify
Firmware unpacker
http://forum.xda-developers.com/mate-7/development/firmware-unpacker-huawei-t2879754
Rom
http://forum.xda-developers.com/mate-7/general/firmware-huawei-ascend-mate-7-b137sp03-t3041629
Pd : I am not a developer or anything similar but I have some years of experience rooting and etc ...
---------- Post added at 10:12 AM ---------- Previous post was at 10:00 AM ----------
Ali_adel_medo said:
Please guys help me to . i have that same problem i have been trying to flash the stock recovery again but i couldn't even with flashify after i flash i takes me to bootloader screen and it shows me a fun_error message
I have a tl-10 device
Click to expand...
Click to collapse
You have a unlocked bootloader???

Yes i have unlocked and rooted the phone using the cwm recovery and now a i can't flash the stock recovery any more

Ali_adel_medo said:
Yes i have unlocked and rooted the phone using the cwm recovery and now a i can't flash the stock recovery any more
Click to expand...
Click to collapse
Do you tried flash via fastboot ?
fastboot flash recovery recovery.img
Or try to use this tool
http://forum.xda-developers.com/mat...custom-recovery-tool-mt7-l10-l10-mt7-t3022424
This should work.

The fast boot just stucks at waiting for device
And the tool you send says that the stock recovery works only on tl_09 and my device is tl_10

djzero86 said:
A way to find the stock recovery is : download the whole B137SP03 Rom from the Huawei site , and use a tool called "Firmware unpacker for Huawei" whit this tool you can extract the recovery.img from the Rom and try to flash it using flashify
Firmware unpacker
http://forum.xda-developers.com/mate-7/development/firmware-unpacker-huawei-t2879754
Rom
http://forum.xda-developers.com/mate-7/general/firmware-huawei-ascend-mate-7-b137sp03-t3041629
Pd : I am not a developer or anything similar but I have some years of experience rooting and etc ...
---------- Post added at 10:12 AM ---------- Previous post was at 10:00 AM ----------
You have a unlocked bootloader???
Click to expand...
Click to collapse
Ok, I couldnt access your firmware unpacker, but I did manage to use the tool you suggested.
I have a different recovery screen, but is this the right one? It has EMUI large in centre screen and the options reboot system now, wipe data/factory reset and wipe cache partition.
If this is the correct one, and I am already on the D137SP03 ROM, I should be able to locally update right?
I tried this, and got a lot further this time, but my phone gave an error message during the update. Do I need to flash the original B137SP03 rom again, even though I am already on it?

I think you maybe can flash using adb commands and also you need adb drivers working
---------- Post added at 11:23 AM ---------- Previous post was at 11:15 AM ----------
dekraan said:
Ok, I couldnt access your firmware unpacker, but I did manage to use the tool you suggested.
I have a different recovery screen, but is this the right one? It has EMUI large in centre screen and the options reboot system now, wipe data/factory reset and wipe cache partition.
If this is the correct one, and I am already on the D137SP03 ROM, I should be able to locally update right?
I tried this, and got a lot further this time, but my phone gave an error message during the update. Do I need to flash the original B137SP03 rom again, even though I am already on it?
Click to expand...
Click to collapse
Ok.... you have the stock recovery now???

djzero86 said:
I think you maybe can flash using adb commands and also you need adb drivers working
---------- Post added at 11:23 AM ---------- Previous post was at 11:15 AM ----------
Ok.... you have the stock recovery now???
Click to expand...
Click to collapse
I think so. If stock looks like I described: black screen, large EMUI logo, and the options reboot system now, wipe data/factory reset and wipe cache partition?

That's right... you have stock recovery... sometimes the update fail if the UPDATE.APP is on the internal storage.. try to flash from a micro sd card or re-download the update ....
English is not my first language...

djzero86 said:
That's right... you have stock recovery... sometimes the update fail if the UPDATE.APP is on the internal storage.. try to flash from a micro sd card or re-download the update ....
English is not my first language...
Click to expand...
Click to collapse
Great, thank you for your fantastic help!
I will get a new micro-sd card tomorrow, and will try it right away!

Good luck... come back to report

djzero86 said:
Good luck... come back to report
Click to expand...
Click to collapse
No luck so far.... I've downloaded the update.zip, put it in my mnt/ext_sdcard/dload folder and start the local update. It begins OK, as the progress bar moves along. But after about 25% it shoots to the end, and then I get an update failed screen with a red exclamation mark.
What could I try to get it to work??

dekraan said:
No luck so far.... I've downloaded the update.zip, put it in my mnt/ext_sdcard/dload folder and start the local update. It begins OK, as the progress bar moves along. But after about 25% it shoots to the end, and then I get an update failed screen with a red exclamation mark.
What could I try to get it to work??
Click to expand...
Click to collapse
Ok, I just reinstalled the B137P03 version from the how to install lollipop thread, and that went successful. Now going to try the update.zip! Keep you posted

Ah, now we're talking It seems to have worked. Phone is now showing 'Android is upgrading' and 'optimising app.....'
Great! It does seem strange I had to reinstall the B137SP03 rom, but that did the trick!