Hi all ( devs )
Our device now have great devs and lots of roms and kernel and tools ( such as diablo's help alot in building kernel ) I think now is the time to Porting USB OTG !
I think we have a dead usb otg topic . I try to start new one :
** First of all for UTG we need an kernel supported which I tryed to find from a similar device with msm 7X30 chipset , ARC(s) is a good choise !
Here are to kernel with otg support and second one is GPU overclocking ( !!!! ) support !
** Fusion kernel source + OTG
https://github.com/mechmetal/semc-kernel-msm7x30
------------------------------------------------
** arc(s) kernel with USB OTG + GPU overclock !!!
http://forum.xda-developers.com/showthread.php?t=1867265
----------------------------------
** I think we need moudules too , in second kernel there are modules !
** And another thing we need is USB power , which we can solve it by using an usb adaptor to be like this :
usb mem >> usb adaptor/host >> I9001
usb adaptor supplys power !
So I think USB OTG porting is difficult but it is possible for our device like I9000 & Desire S & ... But we need devs to do this becuase I AM NOT AN KERNEL DEV !!!
Hope to see kernel devs answer ....
AW: [DEV][I9001] USB OTG porting
Well, we have a usb port, but we dont have the right Controller IC on the mainboard. I think its impossible.
Sent from my GT-I9001 using xda app-developers app
tnx Alireza and i hope to make it as soon as possible.
a couple of months ago i talked with castagna about gpu and this is what he said
...pertanto la nostra gpu non è overcloccabile, quindi non si possono cambiare le frequenze, se overcloccata causa solo un peggioramento delle prestazioni
Click to expand...
Click to collapse
... infact our gpu is not overclockable, so its impossible to change the frequency, if you overclock it you just make the performance bad
Click to expand...
Click to collapse
on the other hand I think educk made a tweak under init.d that overclocked the GPU.. so I'm confused.. any news on this?
Sent from my GT-I9001 using xda app-developers app
Every thing is possible if we want.
If devs keep one working we can make it(I'm not a karnel dev hut I like to have a device with OTG sopport)
XeLLaR* said:
Well, we have a usb port, but we dont have the right Controller IC on the mainboard. I think its impossible.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Why not ?
It wont need controller IC !.Just need an kernel supported and a power supply ! When we have both , why we dont try to port it ?
Just take a look at I9001 or desire s !
drifter94 said:
a couple of months ago i talked with castagna about gpu and this is what he said
on the other hand I think educk made a tweak under init.d that overclocked the GPU.. so I'm confused.. any news on this?
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Our GPU will not be overclockable if it's frequence was locked in bios ( i think ! ) but It seems not ! Take a look at link in post 1# ; It seems possible ! They have done it !
drifter94 said:
a couple of months ago i talked with castagna about gpu and this is what he said
on the other hand I think educk made a tweak under init.d that overclocked the GPU.. so I'm confused.. any news on this?
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
It was just an init.d tweak, I repeat, a tweak and nothing more, and I didn't created it, it was taken from TheBlackWolf's collection of tweaks I gave credits for it in the OP, I think Alireza made it, I'm not sure btw.
This tweak has nothing to do with USB OTG or anything else mentioned in this thread, I will come back here later to explain what it does, I dont have much time now.
Sent from my GT-I9001 using xda app-developers app
R: [DEV][I9001] USB OTG porting
There is a kernel with otg supporto for i9000.. so it's possible with i9001 top ..
Sent from my GT-I9001 using xda app-developers app
educk said:
It was just an init.d tweak, I repeat, a tweak and nothing more, and I didn't created it, it was taken from TheBlackWolf's collection of tweaks I gave credits for it in the OP, I think Alireza made it, I'm not sure btw.
This tweak has nothing to do with USB OTG or anything else mentioned in this thread, I will come back here later to explain what it does, I dont have much time now.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Ok, I found some time, and a PC .
About GPU overclocking, our GPU is called Adreno 205 and the CPU is called Scorpion S2. The whole system is called Snapdragon Processor which holds the CPU and GPU together in one single chip. This type of system is called SoC (System on a Chip), if anyone is interested in this, more details about this type of architecture can be found here: link.
Overclocking the CPU or the GPU is not possible using and init.d tweak, these features are independent of init.d they are kernel features, the kernel must support OC in order to overclock, same applies to UnderVolt (UV).
Ok, overclocking the GPU is not directly possible on our system, it is possible on systems which have independent GPU's such as NVIDIA Tegra. We have SoC so, the whole system is based on that chip, if the CPU is overclocked, that's the only thing we can do. The GPU frequency is hard coded into this system, and it cannot be overclocked. I think this is what castagnaIT meant, the GPU clocks can be changed but only to their allowed values. But this doesn't mean performance optimization.
If the CPU is overclocked, the system is already overclocked so it means performance optimization, this is the only thing we can do in order to maximize the overall performance.
And about that init.d tweak, it is only a thuderbolt script. And after searching up a bit, it does nothing for our phone, so I'm going to test it to see if it actually improves gaming performance or not.
I don't know how this subject got in this thread, but because I was mentioned here, I just taught I can clear this up.
In order to not spam, I will tell my opinion about USB OTG:
I think we don't have the necessary hardware to do this, but who knows, maybe it can be mounted in some way...
Regards,
Erik
Ivendor new kernel appears to have usbdisk mount..
Sent from my GT-I9001 using xda premium
CodeXpert said:
Ivendor new kernel appears to have usbdisk mount..
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
Doest it have OTG modules ?
R: [DEV][I9001] USB OTG porting
alireza7991 said:
Doest it have OTG modules ?
Click to expand...
Click to collapse
I looked for them but didn't found anything. There's just the usbmount folder in /storage
Inviato dal mio frigo a pedali.
edisile said:
I looked for them but didn't found anything. There's just the usbmount folder in /storage
Inviato dal mio frigo a pedali.
Click to expand...
Click to collapse
Indeed, there is. I wonder what it is meant for if it doesnt do anything?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Verstuurd van mijn GT-I9001 met Tapatalk
AW: [DEV][I9001] USB OTG porting
Yes, this folder is needed for USB Mounting your phone to pc via Masstorage.
Sent from my GT-I9001 using xda app-developers app
XeLLaR* said:
Yes, this folder is needed for USB Mounting your phone to pc via Masstorage.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
I dont think so.
Sent from my GT-N8000 using XDA Premium HD app
CodeXpert said:
I dont think so.
Sent from my GT-N8000 using XDA Premium HD app
Click to expand...
Click to collapse
If I'm not wrong the usbdisk is the USB otg storage. Of which I'm not wrong .
Xistance said:
If I'm not wrong the usbdisk is the USB otg storage. Of which I'm not wrong .
Click to expand...
Click to collapse
But I think its an stuff , created while fixing usb on kernel 3.0 or maybe come from the main perference where Ivendor get his source to fix usb !
alireza7991 said:
But I think its an stuff , created while fixing usb on kernel 3.0 or maybe come from the main perference where Ivendor get his source to fix usb !
Click to expand...
Click to collapse
Well, first of all, Ivendor wasn't the one that fixed USB. Anyway, usbdisk is needed and isn't used for OTG in this case. We added it as a way to mount the storage properly.
Code:
<storage android:mountPoint="/storage/usbdisk"
android:storageDescription="@string/storage_usb"
android:primary="false"
android:removable="true" />
As you can see here, it is used as the USB storage. Also :
Code:
# usb disk
dev_mount usbdisk /storage/usbdisk auto /devices/platform/msm_hsusb_host.0
Thanks to Ivendor this project finally works ! I think thread must be closed
Regards
AliReza
Related
Hey guys anyone interested in working with the sources download from the below link
For Developers only!!
Note: This is the first release so you might not find all the files...i'm guessing its only 125mb zipped
The downloaded file has kernel sources and platform sources as well!!
https://opensource.samsung.com/reception/reception_main.do?method=downLoad&attach_id=1581
Sent from my GT-I9003 using XDA App
great.! now our devs can start working on a GB ROM for our phone
Sure i am but i cannot until tomorrow.... Expect an OC kernel soon!
Inviato dal mio GT-I9003 usando Tapatalk
yes !! amazing news!
Sent from my GT-I9003 using XDA App
Wow they replied to you? How long did it take you? I requested the same and didn't get the link/reply yet.
Skin1980 said:
Sure i am but i cannot until tomorrow.... Expect an OC kernel soon!
Inviato dal mio GT-I9003 usando Tapatalk
Click to expand...
Click to collapse
We know you can achieve it...try adding the fugu mod if you can...
Sent from my GT-I9003 using XDA App
Misledz said:
Wow they replied to you? How long did it take you? I requested the same and didn't get the link/reply yet.
Click to expand...
Click to collapse
I had sent it the day XXKPH released
Sent from my GT-I9003 using XDA App
Skin1980 said:
Sure i am but i cannot until tomorrow.... Expect an OC kernel soon!
Inviato dal mio GT-I9003 usando Tapatalk
Click to expand...
Click to collapse
Skin yo' the man.! ahahaha.. will be waiting for your OC Kernel
Give us the right configuration so that we may not heat our phone to the extent that it will be like a toast work 17k
ephraim033 said:
Skin yo' the man.! ahahaha.. will be waiting for your OC Kernel
Give us the right configuration so that we may not heat our phone to the extent that it will be like a toast work 17k
Click to expand...
Click to collapse
Can it be with egg? LOL
yeeehhhaaaaa! another flashing week for us!
-i will be back tonight to xxkb3 to try nama's rom ^^
Misledz said:
Can it be with egg? LOL
Click to expand...
Click to collapse
OT: when the battery leaks out we may consider it as the "EGG" @[email protected]
Downloaded
Don't Know What To Do !!!!
Will Try If Anyone Provides Help on Compiling & Editing
LOL...Vivek im on the same boat. I opened this, Don't know what I'm supposed to do, but I know this is a very important "file" D:
vivekkalady said:
Downloaded
Don't Know What To Do !!!!
Will Try If Anyone Provides Help on Compiling & Editing
Click to expand...
Click to collapse
Google it bro...HOW TO COMPILE A KERNEL
Sent from my GT-I9003 using XDA App
great news dude and skin waiting for the overclocking module or kernel
I am very excited, finally we get gb source code.
Thanks Ron
Please also add tv out n otg support + power of the universe
Joking just waiting for exciting releases now
Sent from my GT-I9003 using Tapatalk
Now we have official GB with its source code but compiling a kernal with perfect work & with addition of new features (over clocking, USB OTG, TV OUT) is really a toughest part of work. Skin & Amit both have really good knowledge about kernal. We can expect something very interesting in future. But we definitely have to keep some pations guys.
vishal24387 said:
Now we have official GB with its source code but compiling a kernal with perfect work & with addition of new features (over clocking, USB OTG, TV OUT) is really a toughest part of work. Skin & Amit both have really good knowledge about kernal. We can expect something very interesting in future. But we definitely have to keep some pations guys.
Click to expand...
Click to collapse
Gotta love ya man. you're still mentioning USB OTG to date. Persistence is one of your traits i tell you.
Anyway, since the source code is in, i think amit should also have a clean start on his CM7 porting project. So what you say amit?
If we Compile This file,we Will get the Working Kernel (Current Kernel) Right??
So we have to edit these files to create a new Kernel ??
any Idea Where To Start ???
I have An Idea to Port the files Which Specifies the "App & Framework" folders of Galaxy S to Galaxy SL so that we can use all the modes which depend on the "apps & framework" files like 9 lockscreen just by copying the framework (files of Galaxy S) files to our framework (files of Galaxy SL) folder.
By doing this we dont have to port modes for S to SL like 5 lockscreen,Overscroll Glow ,CRT etc
LOL The OTG, Actually I saw the preview of OTG on Youtube with the S2 snugged with a 1TB HDD, Gotta say, That **** was amazing, But not to the point where halfway through the video, I kept picturing Vishal :\
hey devs i open this topic to to make great our devices adapting these features to our kernel 3.0.x ...
I hope that we can do this ... if you want to help write here =) goodnight
supercurio said that our phone is not supported hardware
davidteri91 said:
supercurio said that our phone is not supported hardware
Click to expand...
Click to collapse
i think bln work =)
AW: [DEVS] Port bln...vodoo coloor...vodoo sound
What about custom voltage? Or do we have it already...
"...nothing is more powerful than a young boy's wish. Except an Apache helicopter..." -Ted
nope, no custom voltage
AW: [DEVS] Port bln...vodoo coloor...vodoo sound
Bln is already working with castagnaits kernel
Voodoo wont work because theres bo Wolfson sound amp in our phones.
Voodoo color..dafuq is that?
Sent from my GT-I9001 using xda app-developers app
Yes we have custom voltage already in phenom, k^kernel and nexus kernel and i'm not sure about castagnaIT
Just have a look at their thraeds in the features list, its called VDD sysfs interface.
markey97 said:
Yes we have custom voltage already in phenom, k^kernel and nexus kernel and i'm not sure about castagnaIT
Just have a look at their thraeds in the features list, its called VDD sysfs interface.
Click to expand...
Click to collapse
Yes, CastagnaIT was the first to add it in his kernel...
My kernel, Phenom Kernel and Nexus kernel have already this feature.
ok i got blnV9 working a few weeks ago but there is a strange behaviour sometimes so not all is right i think
changes have to be done in the file lights.c and in the kernel
credits to neldar castagnait and stratosk and
ok guys i solved a some of conflict and fix some file....and add in a zip of kernel a bln patch ( i find it in htc desire z kernel )...now BLN work PERFECT
biagio7xD said:
ok guys i solved a some of conflict and fix some file....and add in a zip of kernel a bln patch ( i find it in htc desire z kernel )...now BLN work PERFECT
Click to expand...
Click to collapse
:victory::victory::victory::victory::good::good::good::highfive::highfive::highfive::highfive:
AW: [DEVS] Port bln...vodoo coloor...vodoo sound
biagio7xD said:
ok guys i solved a some of conflict and fix some file....and add in a zip of kernel a bln patch ( i find it in htc desire z kernel )...now BLN work PERFECT
Click to expand...
Click to collapse
Could you tell me exacly what changes are made when flashing the zip? I aint flash anything without knowing what will change.
Sent from my GT-I9001 using xda app-developers app
XeLLaR* said:
Could you tell me exacly what changes are made when flashing the zip? I aint flash anything without knowing what will change.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
it is a lights for msm7x30 ( desire z and castagna use it ) =)
AW: [DEVS] Port bln...vodoo coloor...vodoo sound
biagio7xD said:
it is a lights for msm7x30 ( desire z and castagna use it ) =)
Click to expand...
Click to collapse
Ah ok, so if i flashed CastagnaIT's Kernel i dont need to flash this?
Thanks for your answers!
Sent from my GT-I9001 using xda app-developers app
XeLLaR* said:
Ah ok, so if i flashed CastagnaIT's Kernel i dont need to flash this?
Thanks for your answers!
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
This patch is inside the zip file (containing the boot.img etc ...) so when you flash my kernel instal all the necessary =)
BTW it is VOODOO xD
Ladies and Gentelmen,
Let me introduce my latest work. A new kernel for the Samsung Galaxy Note II (N7100) for AOSP Roms with the following features:
AOSP (Only right now)
Exynos-Abuse Secured
Linux Kernel 3.0.64
Init.d support
Support SetCPU, ROM Toolbox & Voltage Control
CPU Overclocking/Undervolting Support (100Mhz-2000Mhz)
GPU Overclocking/Undervolting Support
CPU Governors conservative, ondemand, powersave, interactive, performance, userspace, lulzactive, lulzactiveq, pegasusq, lazy, adaptive (Default: lulzactiveq)
I/O Schedulers: deadline, cfq, row, sio, vr (Default: row)
Cleancache Enabled
Zram with zcache (Snappy)
Swap support Enabled
KSM Enabled
SLUB Memory Allocator
NTFS R/W kernel Supported
CIFS & NFS Network FileSystems
Boeffla Sound Engine v1.4.2
Ultra tiny ramdisk (Super Extra smoothness)
Increased USB charging to 1700 which is the power of original charger. (Only if USB port can supply this much of current)
Fade LED Supported with switchable LED Control
Compiled with Linaro GCC 4.7.2 (2013.03)
Changelog:
WizDom13 Kernel v1.00
Initial release
WizDom13 Kernel v1.01
[FIX] Fix the issue of the Wifi
WizDom13 Kernel v1.02
Added vr I/O Scheduler
Ultra tiny ramdisk for even more smoothness (Pushed everything to the system partition)
Please give it a try and let me know what you think…
Please follow me on Twitter to receive news about other Work of mine.[/U]. @_WizDom13_
wissowisso said:
Let me introduce my latest work. A new kernel for the Samsung Galaxcy Note II (n7000)
[*]Increased USB charging to 1700 which is the power of original charger. (Only if USB port can supply this much of current)
Click to expand...
Click to collapse
well, im so proud to see another lebanese developer over here
im gonna flash it and give it a try
bas habibi bil post u said ( n7000 ) l galaxy note 2 is ( N7100 ) one more thing bi3ti2id ino l original charger gives only 1100 mAh not 1700 so correct me if im wrong
and if it was as i said just 1100, set the charging maximum to 1200 instead of 1700, otherwise a lot of phones will be dead when left on charging all night long
and try to make it cwm flashable, its better and never increase the counter in download mode
phone never boot up just stuck on black screen after the note 2 sign, are u sure it is for note 2 ?? or for note 1 ?
mrlove6 said:
phone never boot up just stuck on black screen after the note 2 sign, are u sure it is for note 2 ?? or for note 1 ?
Click to expand...
Click to collapse
What Rom do you have?
wissowisso said:
What Rom do you have?
Click to expand...
Click to collapse
monx 12r01 tw based, ill try it on other rom also and report back
mrlove6 said:
monx 12r01 tw based, ill try it on other rom also and report back
Click to expand...
Click to collapse
The one you installed is the aosp. It will not work...
wissowisso said:
The one you installed is the aosp. It will not work...
Click to expand...
Click to collapse
you didnt said that at first in the OP
mrlove6 said:
you didnt said that at first in the OP anyway i made it cwm flashable for you, here we are
View attachment 1898753
Click to expand...
Click to collapse
I made one with the required scripts and busybox you can find it and use it instead.
Kindly remove yours as I dont want to confuse the users...
mrlove6 said:
you didnt said that at first in the OP anyway i made it cwm flashable for you, here we are
View attachment 1898753
Click to expand...
Click to collapse
Yes it is but the one that you should flash for TouchWiz Roms is Wizdom13_stock_v1.00.zip which I didn't submit yet as I'm working on extensive test for it.
wissowisso said:
Yes it is but the one that you should flash for TouchWiz Roms is Wizdom13_stock_v1.00.zip which I didn't submit yet as I'm working on extensive test for it.
Click to expand...
Click to collapse
nevermind 7abibi take ur time, waiting for it
Welcome dude
I will try this kernel thanks for it
ⓝ ⓞ ⓣ ⓔ || ⓜⓐⓒⓗⓘⓝⓔ
Thank you guy,i try your kernel on jellybam ROM now
Inviato dal mio GT-N7100 con Tapatalk 2
---------- Post added at 01:17 PM ---------- Previous post was at 12:25 PM ----------
WiFi not work
Inviato dal mio GT-N7100 con Tapatalk 2
WiFi not working... Other than that is great
Sent from my GT-N7100 using xda app-developers app
Hi Guys, I have released Wizdom13 Kernel v1.01 solving the issue of the Wifi on some roms...
Now i test later
Inviato dal mio GT-N7100 con Tapatalk 2
A great progress on the Call recording...
Shortly AOSP Roms will have the capability to record both side of the call...
Sent from my GT-N7100 using xda app-developers app
Great smoothness, superb connectivity ... But there's one thing. ..
Battery drains a little worrying, but it's not bad.
Overall, it's a swell kernel so far... well done! :thumbup:
Sent from my GT-N7100 using xda app-developers app
Thank u dude for trying my kernel. Actually the only thing that may coz a little above normal power consumption is that the CPU is clocked on 2 Ghz as the maximum scaling frequency. If you set the max freq of the cpu back to 1600 Mhz using any tool like SetCPU you will have less then normal drain and power consumption bcoz of the extensive undervolting applied to the CPU, GPU and Midas chips. Also the fact that its zRam enabled make it conserve power bcoz RAM usage will give less power consumption than the MMC in this case.
Sent from my GT-N7100 using xda app-developers app
TouchWiz
Nice work what i read here.
Can you say a time when a TouchWiz variant is possible?
Sorry guys as I don't have much time to spend on this project. I'm working on it in my spare time. Stock (Touchwiz) have some issue right now as actually its not my priority right now. Actually I'm working on Call Recording feature for the AOSP.
Sent from my GT-N7100 using xda app-developers app
Hey all
Now we know that broadcom knows and Trys to do what we wont
We got ICS Sources ?ok But missing audio ones and also camera libs
So i started new petition
To demand The missing sources
And also sources for Jellybean and kitkat
We need support
Lets do it Guys SIGN and SHARE this
★Petition★ Every Where Please
Good Luck For All Of Us
Reserved
@op Broadcom didn't release sources for us, it was for 'Raspberry Pi'…
madboy777 said:
@op Broadcom didn't release sources for us, it was for 'Raspberry Pi'…
Click to expand...
Click to collapse
However, we can mod it to work with this device.
and if they release jb/kk which i believe they wont
we could port "jb" on this
kk is impossible, device doesnt meet the min requirements of kk
Nachiket.Namjoshi said:
However, we can mod it to work with this device.
and if they release jb/kk which i believe they wont
we could port "jb" on this
kk is impossible, device doesnt meet the min requirements of kk
Click to expand...
Click to collapse
Galaxy mini with specs less than SGY has KK roms
Sent from my GT-S5360 using Tapatalk 2
Nachiket.Namjoshi said:
However, we can mod it to work with this device.
and if they release jb/kk which i believe they wont
we could port "jb" on this
kk is impossible, device doesnt meet the min requirements of kk
Click to expand...
Click to collapse
Lol Think of tass
**** that it has no power to run forio smothly but,, they have kk stable
wait until raspberry pi have 3rd anniv :v
Thank you man maybe this thing works
Sent from my GT-S5360 using XDA Free mobile app
Not for reperry
Read the article well They Heared Our call
This petition only to help devs
Devs are working if the made it its great
If they didnt
The petition would be grown up
myaservip said:
Not for reperry
Read the article well They Heared Our call
This petition only to help devs
Devs are working if the made it its great
If they didnt
The petition would be grown up
Click to expand...
Click to collapse
If it was the petition, then why didn't they released full source ? why only GPU oriented ?
mohamedrashad said:
Galaxy mini with specs less than SGY has KK roms
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
myaservip said:
Lol Think of tass
**** that it has no power to run forio smothly but,, they have kk stable
Click to expand...
Click to collapse
sg mini:
384 MB RAM, Qualcomm MSM7227, Adreno 200
totoro:
290 MB RAM, 830 MHz ARMv6, BCM Videocore iv.
And google says KK can "comfortably" run on devices with 312mb ram
so.... its a lil hard to predict if it could run on totoro...
however, JB May run...
Open GL can be handled.
camera and touch will be a very big speed braker on this one though
ONLY after it successfully boots on totoro... which again, cant be predicted
but i will go with a yes. with an improved Ramdisk we may be able to boot it
I wish we could make it have the source codes... and complete CM9 /10/10.1/11
Thanks for your concerning
ربنا يباركلك و يقويك علي الاعداء D:
Sent from my GT-S5360 using XDA Free mobile app
Nachiket.Namjoshi said:
tassve:
384 MB RAM, Qualcomm MSM7227, Adreno 200
totoro:
290 MB RAM, 830 MHz ARMv6, BCM Videocore iv.
And google says KK can "comfortably" run on devices with 312mb ram
so.... its a lil hard to predict if it could run on totoro...
however, JB May run...
Open GL can be handled.
camera and touch will be a very big speed braker on this one though
ONLY after it successfully boots on totoro... which again, cant be predicted
but i will go with a yes. with an improved Ramdisk we may be able to boot it
Click to expand...
Click to collapse
Bro okey maybe ram is bad on sgy but our cpu is better than tassve its a advance
Sent from my e-tab4 using XDA Free mobile app
Deopolos14 said:
Bro okey maybe ram is bad on sgy but our cpu is better than tassve its a advance
Sent from my e-tab4 using XDA Free mobile app
Click to expand...
Click to collapse
yuea... bcm vidcore iv is better.
thats y it can handle opengl better... but since ram....
so... lags lags everywhere. :|
anyways... those are just my guesses.
there is no harm in building and testing is there ? haha. was just sharing what i felt like
Deopolos14 said:
Bro okey maybe ram is bad on sgy but our cpu is better than tassve its a advance
Sent from my e-tab4 using XDA Free mobile app
Click to expand...
Click to collapse
Tassive cpu is from qualcomm
With full source
So overclocking and optimisation are available
Totoro cpu broadcomm
Incomplete sources- no actual overclocking and no optimisation
Galaxy y is very old i had it and its not good contender for KK
Sent from my C6502 using XDA Premium 4 mobile app
Nachiket.Namjoshi said:
tassve:
384 MB RAM, Qualcomm MSM7227, Adreno 200
Click to expand...
Click to collapse
alkesh95 said:
Tassive cpu is from qualcomm
With full source
So overclocking and optimisation are available
Click to expand...
Click to collapse
Wrong... wrong.
Those stats are for tass, not tassve. Tassve has exactly the same hardware as a Galaxy Y, and runs with the same BCM21553 CPU and VideoCore IV as totoro.
Remember,
Tass= GT-S5570
TassVe= GT-S5570I
totoro, tassve, cooperve and the Galaxy Pocket use the BCM21553 chipset.
It is true, however, that tass has full sources, and that is why they do have a somewhat stable KK.
Broadcom, like what madboy said, only released their sources because it was Raspberry Pi's second anniversary, not because of the petition. If it were, they would have released the sources shortly after the petition reached 10,000 signatures, but instead there was a lapse and they did not release it. Only on Feb 28, Raspberry Pi's 2nd anniversary did they release the sources. Even the main XDA site (not the forum) states that it was the anniversary that prompted Broadcom to release their sources.
Get your facts right.
NightRaven49 said:
Wrong... wrong.
Those stats are for tass, not tassve. Tassve has exactly the same hardware as a Galaxy Y, and runs with the same BCM21553 CPU and VideoCore IV as totoro.
It is true, however, that tass has full sources, and that is why they do have a somewhat stable KK.
Broadcom, like what madboy said, only released their sources because it was Raspberry Pi's second anniversary, not because of the petition.
Get your facts right.
Click to expand...
Click to collapse
oops sorry my mistake... but the specs are of sg mini
sorry, my mistake
post edited
Broadcon has released their sources for raspberry pi anniversary
Galaxy mini(tass) has a qualcomm processor 600mhz
GPU adreno 200
278MB of ram
Inviato dal mio GT-S5570i con Tapatalk 2
I thought Broadcomm doesn't have the libs for camera or audio they are with samsung. So we are never gonna get it.
Correct me if i am wrong.
___________________________________
««||Proud to be a geek. #lovexda||»»
The question that is in my mind now. Those libs are written on Java or C++ or what?
Sent from my GT-S5360 using Tapatalk 2
About RockZ1L : http://forum.xda-developers.com/sony-xperia-z1-compact/development/5-0-rockz1l-kernel-t3101784
This is a personal build of rockz1l with some modifications :
* Bump kernel version to 3.4.110 (include most patches from upstream)
* Add UKSM(Ultra Kernel Same-page Merging), better than the original KSM approach.
* Add f2fs support. You can follow this tutorial to convert your partitions to f2fs : http://forum.xda-developers.com/xpe...rial-migrate-filesystem-to-f2fs-ext4-t3004755
* Add sdcardfs support
* Enable TCP Hybla
* Modified and built with Hyper Linaro ARM-EABI 5.1
* Add cifs and nfs modules
* Replace tuxera exfat with exfat-nofuse (the module fakes itself as a texfat module)
* Add Paragon UFSD
* Disable vermagic check for kernel modules
The kernel is for stock lollipop rom. Only tested on 14.6.A.1.236
Download : https://drive.google.com/folderview?id=0B-DoK6BdpB2fYkYxWGpldEMtb1E&usp=drive_web
Sourcecode : https://github.com/maz-1/android_kernel_sonyz_msm8974
Good to see another kernel choice for our device.
But i'm missing the taiko audio control from sharonlius kernel?
Sent from my D5503 using xda premium
Frunzdoedel said:
Good to see another kernel choice for our device.
But i'm missing the taiko audio control from sharonlius kernel
Sent from my D5503 using xda premium
Click to expand...
Click to collapse
I think Taiko Audio Codec Control and qpnp-vibrator are already in RockZ1L kernel.
Frunzdoedel said:
Good to see another kernel choice for our device.
But i'm missing the taiko audio control from sharonlius kernel?
Sent from my D5503 using xda premium
Click to expand...
Click to collapse
I'm far away from a developer, but mayby you have a look at:http://forum.xda-developers.com/showthread.php?p=60428881??
Sent from my D5503 using xda premium
Amazing
Nice work:good:, thanks OP and which governer do you recommend for performance and good battery life?
baris27 said:
Nice work:good:, thanks OP and which governer do you recommend for performance and good battery life?
Click to expand...
Click to collapse
Alucard/ noop / and deadline for sd ext..
And alucard CPU Hotplug.
Is the best choice for performance/battery live for me (a little bit UV too)
?
Flash with twrp dont work unsuported device?!?
Bootloader is unlockt
Whats wrong?
Thx
Dennis
dennis46419 said:
Flash with twrp dont work unsuported device?!?
Bootloader is unlockt
Whats wrong?
Thx
Dennis
Click to expand...
Click to collapse
I haven't tried since I'm not currently on stock, but I notice the download folder says 'Z1l_Z1c', but all the files only say 'Z1l'. I wonder if he removed Z1c files...
Yes thats right.. I dont See IT
What Rom You Use?
Well i flahed the zl folder on my z1 compact and it works very well
On Stock Rom?
@maz-1,
i want to ask you if you have an idea why i can t overclock my device
i can t apply 2.4 GHZ frequency.
does it have to do with SE linux ?
Sorry, no idea when i tried this kernel i had no problem to apply 2.41 GHz with kernel auditor. But i prefer http://forum.xda-developers.com/showthread.php?t=3096060
[KERNEL][Z1C][5.0-5.1][F2FS] Advanced-Kernel v16.0[11/16/2015]
Sent from my D5503 using xda premium
Frunzdoedel said:
Sorry, no idea when i tried this kernel i had no problem to apply 2.41 GHz with kernel auditor. But i prefer http://forum.xda-developers.com/showthread.php?t=3096060
[KERNEL][Z1C][5.0-5.1][F2FS] Advanced-Kernel v16.0[11/16/2015]
Sent from my D5503 using xda premium
Click to expand...
Click to collapse
same thing happens with this kernel also
broky said:
same thing happens with this kernel also
Click to expand...
Click to collapse
Mayby your device is very special? ?
Sent from my D5503 using xda premium
broky said:
same thing happens with this kernel also
Click to expand...
Click to collapse
Are other signs of the kernel showing up, (additional governors, etc.)? Maybe it's just not flashing right.
levone1 said:
Are other signs of the kernel showing up, (additional governors, etc.)? Maybe it's just not flashing right.
Click to expand...
Click to collapse
yes,everything seems to appear as it should,except the highest frequency..
broky said:
yes,everything seems to appear as it should,except the highest frequency..
Click to expand...
Click to collapse
Never heard of it... I know that the original Rockz1 kernel comes with an app called 'pimp my Z1c' or something like that. Maybe you could pull the app out of the zip and install it, see if it shows anything different.
levone1 said:
Never heard of it... I know that the original Rockz1 kernel comes with an app called 'pimp my Z1c' or something like that. Maybe you could pull the app out of the zip and install it, see if it shows anything different.
Click to expand...
Click to collapse
already tried this,same result.
anyway problem seems to be solved using trickster mod
dennis46419 said:
Flash with twrp dont work unsuported device?!?
Bootloader is unlockt
Whats wrong?
Thx
Dennis
Click to expand...
Click to collapse
run "getprop ro.product.device" in recovery. Does it give you "amami" or "D5503" ?