Ladies and Gentelmen,
Let me introduce my latest work. A new kernel for the Samsung Galaxy Note II (N7100) for AOSP Roms with the following features:
AOSP (Only right now)
Exynos-Abuse Secured
Linux Kernel 3.0.64
Init.d support
Support SetCPU, ROM Toolbox & Voltage Control
CPU Overclocking/Undervolting Support (100Mhz-2000Mhz)
GPU Overclocking/Undervolting Support
CPU Governors conservative, ondemand, powersave, interactive, performance, userspace, lulzactive, lulzactiveq, pegasusq, lazy, adaptive (Default: lulzactiveq)
I/O Schedulers: deadline, cfq, row, sio, vr (Default: row)
Cleancache Enabled
Zram with zcache (Snappy)
Swap support Enabled
KSM Enabled
SLUB Memory Allocator
NTFS R/W kernel Supported
CIFS & NFS Network FileSystems
Boeffla Sound Engine v1.4.2
Ultra tiny ramdisk (Super Extra smoothness)
Increased USB charging to 1700 which is the power of original charger. (Only if USB port can supply this much of current)
Fade LED Supported with switchable LED Control
Compiled with Linaro GCC 4.7.2 (2013.03)
Changelog:
WizDom13 Kernel v1.00
Initial release
WizDom13 Kernel v1.01
[FIX] Fix the issue of the Wifi
WizDom13 Kernel v1.02
Added vr I/O Scheduler
Ultra tiny ramdisk for even more smoothness (Pushed everything to the system partition)
Please give it a try and let me know what you think…
Please follow me on Twitter to receive news about other Work of mine.[/U]. @_WizDom13_
wissowisso said:
Let me introduce my latest work. A new kernel for the Samsung Galaxcy Note II (n7000)
[*]Increased USB charging to 1700 which is the power of original charger. (Only if USB port can supply this much of current)
Click to expand...
Click to collapse
well, im so proud to see another lebanese developer over here
im gonna flash it and give it a try
bas habibi bil post u said ( n7000 ) l galaxy note 2 is ( N7100 ) one more thing bi3ti2id ino l original charger gives only 1100 mAh not 1700 so correct me if im wrong
and if it was as i said just 1100, set the charging maximum to 1200 instead of 1700, otherwise a lot of phones will be dead when left on charging all night long
and try to make it cwm flashable, its better and never increase the counter in download mode
phone never boot up just stuck on black screen after the note 2 sign, are u sure it is for note 2 ?? or for note 1 ?
mrlove6 said:
phone never boot up just stuck on black screen after the note 2 sign, are u sure it is for note 2 ?? or for note 1 ?
Click to expand...
Click to collapse
What Rom do you have?
wissowisso said:
What Rom do you have?
Click to expand...
Click to collapse
monx 12r01 tw based, ill try it on other rom also and report back
mrlove6 said:
monx 12r01 tw based, ill try it on other rom also and report back
Click to expand...
Click to collapse
The one you installed is the aosp. It will not work...
wissowisso said:
The one you installed is the aosp. It will not work...
Click to expand...
Click to collapse
you didnt said that at first in the OP
mrlove6 said:
you didnt said that at first in the OP anyway i made it cwm flashable for you, here we are
View attachment 1898753
Click to expand...
Click to collapse
I made one with the required scripts and busybox you can find it and use it instead.
Kindly remove yours as I dont want to confuse the users...
mrlove6 said:
you didnt said that at first in the OP anyway i made it cwm flashable for you, here we are
View attachment 1898753
Click to expand...
Click to collapse
Yes it is but the one that you should flash for TouchWiz Roms is Wizdom13_stock_v1.00.zip which I didn't submit yet as I'm working on extensive test for it.
wissowisso said:
Yes it is but the one that you should flash for TouchWiz Roms is Wizdom13_stock_v1.00.zip which I didn't submit yet as I'm working on extensive test for it.
Click to expand...
Click to collapse
nevermind 7abibi take ur time, waiting for it
Welcome dude
I will try this kernel thanks for it
ⓝ ⓞ ⓣ ⓔ || ⓜⓐⓒⓗⓘⓝⓔ
Thank you guy,i try your kernel on jellybam ROM now
Inviato dal mio GT-N7100 con Tapatalk 2
---------- Post added at 01:17 PM ---------- Previous post was at 12:25 PM ----------
WiFi not work
Inviato dal mio GT-N7100 con Tapatalk 2
WiFi not working... Other than that is great
Sent from my GT-N7100 using xda app-developers app
Hi Guys, I have released Wizdom13 Kernel v1.01 solving the issue of the Wifi on some roms...
Now i test later
Inviato dal mio GT-N7100 con Tapatalk 2
A great progress on the Call recording...
Shortly AOSP Roms will have the capability to record both side of the call...
Sent from my GT-N7100 using xda app-developers app
Great smoothness, superb connectivity ... But there's one thing. ..
Battery drains a little worrying, but it's not bad.
Overall, it's a swell kernel so far... well done! :thumbup:
Sent from my GT-N7100 using xda app-developers app
Thank u dude for trying my kernel. Actually the only thing that may coz a little above normal power consumption is that the CPU is clocked on 2 Ghz as the maximum scaling frequency. If you set the max freq of the cpu back to 1600 Mhz using any tool like SetCPU you will have less then normal drain and power consumption bcoz of the extensive undervolting applied to the CPU, GPU and Midas chips. Also the fact that its zRam enabled make it conserve power bcoz RAM usage will give less power consumption than the MMC in this case.
Sent from my GT-N7100 using xda app-developers app
TouchWiz
Nice work what i read here.
Can you say a time when a TouchWiz variant is possible?
Sorry guys as I don't have much time to spend on this project. I'm working on it in my spare time. Stock (Touchwiz) have some issue right now as actually its not my priority right now. Actually I'm working on Call Recording feature for the AOSP.
Sent from my GT-N7100 using xda app-developers app
Related
Hello guyz..........and girls.
I see that many non-cranium users are using my kernel as well,so i decided to make a separate thread
FEatures
Based on manveru0's kernel,with the following additions/changes-
Overclock Upto 1930 Mhz
NEW CPU GOVERNORS (USE NO-FRILLS CPU CONTROL/SET-CPU TO CONTROL)
Lagfree
Smartass2
Scary
Minmax
SavagedZen
Smoothass
Brazilian Wax
InteractiveX
Hotplug
NEW I/O SCHEDULERS (USE NO-FRILLS CPU CONTROL/SET-CPU TO CONTROL)
BFQ
SIO
VR(BEST FOR ANTUTU TESTING,ALONG WITH CPU GOVERNOR "PERFORMANCE")
SFB NET SCHEDULER
LATEST SAMSUNG PATCHES
init.d support
VDD Stats Support-Software UV(USE INCREDI CONTROL TO SET!!!!!!) {Thanks to -snq}
Custom Bootanimation support-Place sanim.zip in /system/etc
CleanCache
And a hell lots of other patches!
Download
http://sakindia123.prophecy.li/downloads/cranium-rom-kernels
Instructions-
*Place the .zip in your Sd card.
*Go into recovery mode(U must have FeaMod Recovery to use this!)
*Flash the zip.
Pretty easy,huhh?
Kernel SOurces-
https://github.com/sakindia123/Cranium_Kernel
Kindly keep the thread neat and clean!
An yes,u can flash it on roms other than cranium
PS-Sneak Peek for RC8 Kernel
https://github.com/downloads/sakindia123/Cranium_Kernel/RC8-sneak-peek.tar (Flash via ODIN)
Hi sakindia,
That 1 up to date or previous 1..sorry just to confirm b4 download..
Sent from my GT-I9001 using xda premium
Its the same kernel i guess, just a new thread from the rom..
mhairy said:
Hi sakindia,
That 1 up to date or previous 1..sorry just to confirm b4 download..
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
Its actually v6 of the kernel(used in rc6)'
Benchmarks show that v6 outperforms v7
oopsie daisie double post
ohhh~~THANKS a LOT!! I like this kernel. Btw, how can I change the I/O SCHEDULERS?
sakindia123 said:
Its actually v6 of the kernel(used in rc6)'
Benchmarks show that v6 outperforms v7
Click to expand...
Click to collapse
What are you going to do with test kernel rc8?
Sent from my GT-I9001 using XDA App
alextso321 said:
ohhh~~THANKS a LOT!! I like this kernel. Btw, how can I change the I/O SCHEDULERS?
Click to expand...
Click to collapse
As always...no frills or setcpu...both from market
pyronia said:
As always...no frills or setcpu...both from market
Click to expand...
Click to collapse
Setcpu can't change io schedule. Use voltage control.
Sent from my GT-I9001 using xda premium
fadzlihellmuth said:
Setcpu can't change io schedule. Use voltage control.
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
With No frills you can change the I/O.
Sent from my GT-I9001 using XDA App
anyway, just to let u know. been using rc8 for 1 day now. it works fine
annoymous1234 said:
anyway, just to let u know. been using rc8 for 1 day now. it works fine
Click to expand...
Click to collapse
could u be more specific? ... how about battery life?... how much u can get?.. and is it lag or not?
Maybe kernel RC8 solved the problem ?
Hi Sakindia,
don't want to be too pushy but on my investigations for a solution concerning the charging problem in the original cradle maybe you have a solution. I figured out that all open source kernels suffer from the same problem as mentioned here:
http://forum.xda-developers.com/showpost.php?p=11854684&postcount=1
Maybe it is possible to reintegrate the mentioned modul without loosing the advantages of the cranium kernel
Campai
Rhonin
Rhonin86 said:
Hi Sakindia,
don't want to be too pushy but on my investigations for a solution concerning the charging problem in the original cradle maybe you have a solution. I figured out that all open source kernels suffer from the same problem as mentioned here:
http://forum.xda-developers.com/showpost.php?p=11854684&postcount=1
Maybe it is possible to reintegrate the mentioned modul without loosing the advantages of the cranium kernel
Campai
Rhonin
Click to expand...
Click to collapse
Sorry.i have no idea about it
It can be done if i remove samsung patches,but that affects performance!
FaqihCici said:
could u be more specific? ... how about battery life?... how much u can get?.. and is it lag or not?
Click to expand...
Click to collapse
i lose around 3% on 6 hours idle with 122 min freq and smartassV2. most importantly there is no wakelock and no lag.
UPDATE: last night i lose only 1% for 6 1/2 hours (sleep time). i use ondemand this time, i think its better compare with smartass, gonna stick with ondemand
Nice work brother
can someone tell me what I/O schedulers exactly do? or point me a tutorial about this?
faust.deaconu said:
can someone tell me what I/O schedulers exactly do? or point me a tutorial about this?
Click to expand...
Click to collapse
I/O Schedulers
lol
★ ★Hello guys, I am back with new Kernels! ★ ★
★ FAster/Sleeker and better than my previous builds- ★
★ First of all-
★ MY Sources are based on XDA_BAMs sources!
★ Thanks to him for letting me use it!
READ THIS FIRST-
Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications,
and if you point the finger at me for messing up your device, I will laugh at you.
FEATURES-
1] Disabled some unnecessary stuff
2] I/O Patches and Tweaks to improve I/O
3] Stochastic Fair Blue Net Scheduler
4] Used many Makefile Optimizations with Linaro 4.6.3
5] Cleancache driver
6] EXT23 mounted as EXT4 (faster and better!)
7] Overclock upto 1.2Ghz w/ Undervolting of stock freq
8] JHash Bumped to V3
9] XZ Compression (Speeds up boot time)
10] GOVERNERS: Conservative/Ondemand/Smartass2/Performance (Less Governers, lesser bloat)
11] IO SCHEDULERS: Sio/Noop
12] Boot freq resticted to 1Ghz (dalingarin)
13] VM_MAX_READAHEAD set to 1024
14] Many small patches/improvements!
15] CFS and VM Ratios Tweaked for best battery + Performance
LOTS! Coming up soon! Stay tuned
Have a look at my github for detailed info about changes!
Reserved
FAQ:
1. My device rebooted or crashed, how can I help?
A: Get me /proc/last_kmsg or logcat.
2. Battery sucks, my device is not entering deep sleep. FIX PLOX!
A: Fix it yourself, it's an app waking your device up not the kernel's problem. Also make sure you let your device settle for at least 2 charging cycles. Typically apps like Facebook and Google Maps can cause problems since they wake it up pretty much all the time
3. Signal is dropping since I flashed the kernel, amg u sucks!
A: The kernel has nothing to do with gsm/cmda signal.
4. Do I need to wipe anything when flashing this kernel?
A: Just wipe cache and Dalvik cache after flashing.
5. Does this kernel has X or Y mod?
A: Learn to read, everything you need to know is in the features list, changelog or public repo.
6. Don't use 3rd party init.d scripts!!!
7. After the device boots, the phone runs at 1.35Ghz. So make sure you set it to whatever frequency you want.
8. For Daily use and best battery life, Recommended Settings are 1Ghz Max, 600Mhz Min, Conservative Governer and CFQ/SIO IO Scheduler.
Another one
DOWNLOAD LINKS
Download TITANIUM KERNEL BUILD#1
Last one reserved
Changelogs-
great work buddy...! I have a suggestion that u should creat different OPP for different frequencies. It will br very easy for a normal user to change frequencies through different opp.
It seems very good!!! I will be testing for some days and if battery drain is good, will add to my rom! Thank you!!
vishal24387 said:
great work buddy...! I have a suggestion that u should creat different OPP for different frequencies. It will br very easy for a normal user to change frequencies through different opp.
Click to expand...
Click to collapse
Yes I'll be doing that.. maybe in the coming builds..
Adi_Pat, with the phone disconnected to the computer it says USB Connected and appears the screen of mass storage with the option of activate mass storage.
download link broken.
Adi_Pat said:
DOWNLOADS-
TITANIUM KERNEL BUILD 2 -
Download DDKP3 specefic kernel from here.
Download Kernel with Universal CFROOT Ramdisk from here.
Click to expand...
Click to collapse
Broken links.......Showing File deleted
Invalid or Deleted File.
Updated Download Links~!
can you make it also compatible in AOSP rom?
As I thought its not booting on my phone. Because from my experience I learned that my phone support only 1.2 ghz max. Above that phone stuck at boot screen. Can u give me test kernel with only 1.2ghx max opp????
I am going to test it right now. Would u mind, if it is powersaver enough, if I add it to my ROM (CleanKpuRom) ?
luiseteyo said:
I am going to test it right now. Would u mind, if it is powersaver enough, if I add it to my ROM (CleanKpuRom) ?
Click to expand...
Click to collapse
Wait I am uploading fixed ones which boot.
You can include it in ur ROM
vishal24387 said:
As I thought its not booting on my phone. Because from my experience I learned that my phone support only 1.2 ghz max. Above that phone stuck at boot screen. Can u give me test kernel with only 1.2ghx max opp????
Click to expand...
Click to collapse
Your device will boot now, download and flash the kernel.
Your device did not boot becuase I set startup freq to 1.35Ghz so the phone didnt have enough power to turn on.
Now you test the new uploaded kernel, it will boot and you should be fine.
Adi_Pat said:
Wait I am uploading fixed ones which boot.
You can include it in ur ROM
Click to expand...
Click to collapse
I used the uploaded and the results are AMAZING in powersave terms!! Big thangs!!
Enviado desde mi GT-I9003 usando Tapatalk
luiseteyo said:
I used the uploaded and the results are AMAZING in powersave terms!! Big thangs!!
Enviado desde mi GT-I9003 usando Tapatalk
Click to expand...
Click to collapse
Test 1.35Ghz , I made it as stable as I could.. Also can you tell me what updater script lines are needed to make the kernel cwm flashable?
Sent from my GT-I9003 using xda premium
Adi_Pat said:
Test 1.35Ghz , I made it as stable as I could.. Also can you tell me what updater script lines are needed to make the kernel cwm flashable?
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
I dont know wheather u have repaired the universal titanium kernel or not but on my xxkpq its not booting. I always happens whenever I use a kernel which is overclocked to 1.35 ghz. But whenever I use UC v9 1009 version kernel which is overclocked to 1.2 ghz only then my phone always boot successfully. Its something related to overclocking above 1.2ghz which my phone is not accepting.
good day fellow xda members,,, after some coaching from some friendly people i am now gonna share my kernel....:victory::victory::victory:
to you guys armed with your flame throwers please stand down and have some mercy :laugh:,,, this is my 1st share and well its not yet on par with other kernels like kuro,savie, merruk etc.... but ive been improving it ever since i first started..... and i will continue on with its improvement...
this is also for my kabayans(countrymen) they have produced some roms for our galaxy y but none of them rolled out a kernel so i myself made one
FEATURES:(not much but its basically the essentials)
init.d support
4 cpu frequencies (156,312,624,832)
flash player support
ext2,3,4 support
swap support
droidwall support
undervolted by -100mv
added some governors
userspace
powersave
ondemand
ondemandx
minmax
lionheart
lazy
lagfree
intellidemand
hotplug
interactive
conservative
performance
added io scheds
sio
cfq
deadline
vr
Click to expand...
Click to collapse
DOWNLOAD LINKS - Mod Edit: Links removed as kernel has no source code so is violating the GPL and XDA Forum Rules.
KERNEL#38
KERNEL#39rev1
additions
5 cpu frequency
KERNEL#48
removed unstable 468mhz
undervolt integrated
KERNEL#50
i went loco mode on this one
7 frequencies all in all!!!
now works on jellyblastv3
back on proper 4 cpu freq
KERNEL #53
back to the stable 4 freqs
added ext4 support
added swap support
added boot splash
smaller kernel size(using lzma compression)
312mhz boot now fixed
lionheart, interactive govs built in (disregard metaphase gov its a fail)
can run flashplayer on our phone
only 1 bug 312mhz cant go down to 156 and vice versa must be on 624 or 832 for it to ramp down to 156 (fix coming soon)
312mhz cant go down to 156 and vice versa must be on 624 or 832 for it to ramp down to 156 (fix coming soon)
sorry if development is slow.. busy for my upcoming board exam
Click to expand...
Click to collapse
INSTRUCTIONS
1.reboot to CWM recovey
2.if on kernel with built in cwm go to mounts and storage and mount /system
3.choose install zip from sdcard
4. look for the directory you downloaded my kernel zip
5. flash away
6. reboot and see how it works
Click to expand...
Click to collapse
known bugs
1.INCOMPATIBLE with JELLYBLASTv3
wont boot and logcat show no such file or diretory /system/xbin/busybox(but i checked it busybox is there)
2.HYPERION ROM-reportd by vanhalen35
battery charging wont reach 100% when using setcpu stucks at 99% but unistalling setcpu and rebooting it charges up to 100% dont know why but on my ussrv6 it charges just fine up to 100%
3.#39rev1
468mhz isnt working properly yet
4.#48
kernel version shows up as unavaiable under settings>about phone>kernel info .but is seen using cpuspy
startup is laggy due to it boots up using 312mhz
5.#50
CPU states cannot be read except for deepsleep
still laggy at booting but after a while it is fine
728 is not stable, the rest seems fine need verification from you guys
6. #51
still havent solved the cpu booting at 312mhz
7. #53
312mhz cant go down to 156 and vice versa must be on 624 or 832 for it to ramp down to 156 (fix coming soon)
just report anyother bugs you encounter
big big thanks to these guys:good::good::good:without them i woulld not even know how to compile a kernel without their help
irfanbagus
marco-too
savie
master_key
kurotsugi
and this guy for being my tester...
vanhalen35
and lets always not forget to mention
YOU
Reserved..
I am a true kernel-holic so thanks
Sent from my GT-S5360 using xda premium
finally,
nice job,
and i lol at the english translation of the title,
see?
i told you people will appreciate your work
it also motivates you and lets you have lots of testers instead of you testing it alone
deathnotice01 said:
finally,
nice job,
and i lol at the english translation of the title,
see?
i told you people will appreciate your work
it also motivates you and lets you have lots of testers instead of you testing it alone
Click to expand...
Click to collapse
yeah... i guess you are right... now trying to fix the undervolt so there will be no need for bacem tweak and
trying to add smartassv2 governor
good work sir but is this compatible with repencis v3.5?
deleted (double post)
blackpanther2209 said:
good work sir but is this compatible with repencis v3.5?
Click to expand...
Click to collapse
give it a try... only tested on 3 roms as of now which is ussr hyperion and jellyblast and only jellyblast was incompatible,,, it should work on yours just have back up kernel just in case
Congratulations for ur new kernel.
tnx sir i will give u some feedback after i flash my rom.
Finally you posted it!! Great job
Sent from my GT-S5360 using xda premium
cool.. how about on stock rom?
Sent from my GT-S5360 using xda premium
tjsgy said:
Finally you posted it!! Great job
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Indeed i did.... figured that development would be slow if i kept it to myself
Sent from my GT-S5360 using xda premium
pm sent..
Sent from my GT-S5360 using xda premium
the kernel is still the same bro after i flashed it.anyway,tnx a lot and congratz of ur new kernel.
blackpanther2209 said:
the kernel is still the same bro after i flashed it.anyway,tnx a lot and congratz of ur new kernel.
Click to expand...
Click to collapse
What do you mean the same??? #38 is same as #39
Or your kenel did not change on your rom???
Sent from my GT-S5360 using xda premium
the kernel did not change on my rom.
did you flash it thru cwm or stock recovery?
Sent from my GT-S5360 using xda premium
blackpanther2209 said:
the kernel did not change on my rom.
Click to expand...
Click to collapse
Did you get any errors???
Sent from my GT-S5360 using xda premium
i flashed with cwm and follow all the instructions and i did not get any error or fc after reboot.
Hello Guys....
Starting Off.... Proudly presenting to u my kernel
Features :
Code:
Enabled Zcache
CIFS and TUN Support .
Only 4 Governors ( Interactive, Performance, Ondemand , Smartass2 ) Removed all other governors ,
Ext4 Partition ,
Stripped modules from ramdisk ,
Compiled with arm2011.09 ,
2 Way Call Recording Patch ,
Non CF Root but wifi boot animation super user busybox init.d works ,
Over clocked up to 806Mhz and export scaling frequencies ,Undervolt
Over clocking frequency is upto 787... By default the Max Frequency is 600Mhz and Min Frequency is 245Mhz ...
After Intensive testing undervolt has be implemented
Experiencing a stable system from the time of flashing even at 787Mhz
Flash on GB Rom's Formatted to EXT4 Partition only
Release 1 : Release 1
Release 2 : Release 2 [ Latest ]
Source : Github
Disclaimer : I will not hold any guarantee for bricked devices, over heating [ Dont worry nothing would happen like that ... Just a formality sake ]
PS : Yet to add more features ... Would update frequently
Credits :
zcop
Adi_pat
avs333
Me ofc :silly:
Change Log
Release 1 :
Enabled Zcache
CIFS and TUN Support .
Only 4 Governors ( Interactive, Performance, Ondemand , Smartass2 ) Removed all other governors ,
Ext4 Partition ,
Stripped modules from ramdisk ,
Compiled with arm2011.09 ,
Non CF Root but wifi boot animation super user busybox init.d works ,
Over clocked up to 806Mhz and export scaling frequencies ,Undervolt
Release 2 :
Implemented 2 way call recording patch ( still in beta stage )
Patch's
Download the app given below
Note : The 2 way call recording patch is still in Beta stage cause of distortions and low sound so don't blame me for poor quality
To whomsoever who would like to know if the kernel patch is workin or not .... [Recorded from my mobile directly ]
Audio
finally the #development# of fit is active
speed_bot said:
finally the #development# of fit is active
Click to expand...
Click to collapse
agreed , a Revolution needed!
maybe it can start this!
for stock based roms?!
:good:
How'd you test up uv?
What are the results?
Btw, nice work bro!
"By the power vested in me, I now pronounce you, Man and Knife"
Welcome back willy with a bang
a.cid said:
How'd you test up uv?
What are the results?
Btw, nice work bro!
"By the power vested in me, I now pronounce you, Man and Knife"
Click to expand...
Click to collapse
Studied & Picked up few sources from git's ... And just figured it out that every clock speed has been assigned a specific voltage so out of trial and error method i found tat the more i undervolt the system seems to lag .... So when i got a stable system i compiled the build.... U can also say that the undervolt is still in beta stage cause u never know if the scaling set is correct till u experience bugs but...so far so good i've been gettin a stable result :fingers-crossed:
But I read that scaling differs from device to device?
Just like oc, some devices can handle more, some less...
System lag is bad news though...
Will make uv pointless, and also the time I would have spent improving the way...
What about uv+oc?
"By the power vested in me, I now pronounce you, Man and Knife"
yup scalin of frequencies differ from device to device nd that is y i've used sources from tj_style's git .... i would still hav to concentrate on OC + UV together cause it needs lots of testin .....
Sent from my GT-S5670 using XDA
looks kool...!
btw cn u provide one fr cm based rom?
Sent from my GT-S5670 using xda premium
tjkingg said:
looks kool...!
btw cn u provide one fr cm based rom?
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Would try to
Sent from my GT-S5670 using XDA
I'll flash it on creeds rom.
wilfredcool007 said:
Would try to
Click to expand...
Click to collapse
Yes,pls make a good kernel for cm. Because cm roms make my phone heat up very soon as compared to gb roms.
It would had been Yajnavalkya aka yajnab.
The thing i was actually telling u is that i didn't like ur kernel as bcoz ur kernel is superb with the stripping and making me to return to kernel development. Giving me a headache u guyzzz
yajnab said:
It would had been Yajnavalkya aka yajnab.
The thing i was actually telling u is that i didn't like ur kernel as bcoz ur kernel is superb with the stripping and making me to return to kernel development. Giving me a headache u guyzzz
Click to expand...
Click to collapse
what does this hav to do it with my kernel
Its not working on beats audio v1 rom. Phone gets stuck at boot.
djbjpanchal said:
Its not working on beats audio v1 rom. Phone gets stuck at boot.
Click to expand...
Click to collapse
If its a GB ROM it should boot if not thn try a factory reset....btw LOGCAT
djbjpanchal said:
Its not working on beats audio v1 rom. Phone gets stuck at boot.
Click to expand...
Click to collapse
POst a logcat
---------- Post added at 09:21 AM ---------- Previous post was at 08:43 AM ----------
djbjpanchal said:
Its not working on beats audio v1 rom. Phone gets stuck at boot.
Click to expand...
Click to collapse
POst a logcat
Thread Updated Guys... Do check the latest Post
Hi, everybody. I have compiled my kernel on our SGY. This kernel have full support CM7.2 RC4 by Bieltv.3
Changelog:
Version 1.0
first release
Version 1.1
Added new governors,shedulers,
deleted 1248 freq
Features:
SWAP
Dualboot
DroidWall support
CM7 and CM9 support
Governors:
Lazy,
ondemand,
interactive,
interactivex,
perfomance,
smartassv2,
powersave,
userspace,
conservative,
SmartassH3,
intellidemand2,
intellidemand,
darkside,
AssWax,
agresive,
powercats,
Frequencies:
156,
312,
624,
780,
832,
936,
1040
Schedulers:
cfq,
deadline,
noop,
vr,
zen
P.S. I have created an apk, which can switch between ROMS (It is a test version). There are an activity and widget.
Source code: https://github.com/angpysha/angpysha_kernel
Download
View attachment my_kernel2_signed.zip -version 1,0
View attachment angpysha_kernel11_totoro.zip - version 1.1
Support cm9?
Sent from my GT-S5360 using Tapatalk 2
a guide for dualboot where cool.
arvindkp01 said:
Support cm9?
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Yes, but there is no audio to.
Kernel source?
-CALIBAN666- said:
a guide for dualboot where cool.
Click to expand...
Click to collapse
Sorry, i'll write it later. Because there is some errors.
For kernel developers: You must provide FULL source code, not just the edits you made (reference here). Your source code must also be up-to-date with any binary releases. If in doubt, update your github first, then release the binary, NOT the other way round.
full thread details of rules on this
http://forum.xda-developers.com/showthread.php?t=2312894
Edit: Thread reopened
some governors didn't work normally , lag like hell after selecting them.
kevin_tn said:
some governors didn't work normally , lag like hell after selecting them.
Click to expand...
Click to collapse
What governors don't work?
kevin_tn said:
some governors didn't work normally , lag like hell after selecting them.
Click to expand...
Click to collapse
I found, that device have lags on 1248 freq. I'll try to fix it.
angpysha said:
I found, that device have lags on 1248 freq. I'll try to fix it.
Click to expand...
Click to collapse
i don't think sgy need to be overclocked upto 1248.
waiting for the next release.
:highfive::highfive:
OP, i think this might be asking for too much. But could you make a version for Galaxy Y Duos (with the drivers for CM)? We have some builds of CM 7.2 but they don't work very well because the drivers are missing, i also asked for bieltv.3 to make one, but he either ignored it or didn't see it. Our phone have little to almost no support by the developers, we would be glad if you could release a version of your kernel to our phone.
griefgiver said:
OP, i think this might be asking for too much. But could you make a version for Galaxy Y Duos (with the drivers for CM)? We have some builds of CM 7.2 but they don't work very well because the drivers are missing, i also asked for bieltv.3 to make one, but he either ignored it or didn't see it. Our phone have little to almost no support by the developers, we would be glad if you could release a version of your kernel to our phone.
Click to expand...
Click to collapse
i'll try to release it.
...why is this in the General Section?
I thought kernel threads like this go to the Android Dev section...
Sent because I <3 Aerith
NightRaven49 said:
...why is this in the General Section?
I thought kernel threads like this go to the Android Dev section...
Sent because I <3 Aerith
Click to expand...
Click to collapse
Because I have not 10 posts to publish this thread in dev
...ask a moderator to move this thread or something, it might work.
Sent because I <3 Aerith: D
angpysha said:
i'll try to release it.
Click to expand...
Click to collapse
Thanks a lot! I'll be waiting. And good luck!
Overclock can't be applied on bcm21553 devices
Inviato dal mio GT-S5570i con Tapatalk 2
devilyuri said:
Overclock can't be applied on bcm21553 devices
Click to expand...
Click to collapse
With 936 MHz on s5570i everything very quickly (soon we will have theme)..