Database Info

[UPDATED] [How To] P5100 Upgrade to P5100XXCLI1 Jelly Bean OTA + CWM + Root

First of all, I am not to be held responsible for any damage this may do to your device.
This guide assumes that you know what you are doing (NOT FOR BEGINNERS). I would advise the newbies to do a lot of research and read up on the basic and advanced "HOW TOs" which are all available on xda-developers and a lot of other forums before asking questions about stuff you should already know before attempting a procedure like this. That being said, I WILL NOT RESPOND TO THESE TYPES OF QUESTIONS.
NOTES:
This procedure is only for the P5100
This procedure was performed under Windows 7 Ultimate 64-bit with all required drivers installed
This procedure will not lock your device to Globe Philippines
This procedure will wipe your device including the Internal Storage
You will require a micro-SD card with at least 1GB free space
You must follow the instructions to the letter
You may opt to backup your device before performing this procedure
Instructions:
1. Download the following files:
ODIN: http://www.mediafire.com/?lh0batz9fjaalps
Original P5100 Stock Philippine ROM: http://www.hotfile.com/dl/165239219/07f45f2/P5100XWALE2_P5100OLBALE1_XTE.zip.html
P5100 Required Philippine OTA: http://www.hotfile.com/dl/170852899/ad44bcc/GT-P5100_P5100XXBLI2-OTA-P5100XWALE2_GLB_268219552.zip.html
P5100 Jelly Bean Philippine OTA: http://www.hotfile.com/dl/171436333/2f6f89a/GT-P5100_P5100XXCLI1-OTA-P5100XXBLI2_GLB_279272235.zip.html
ClockworkMod Touch Recovery 6.0.1.2: https://docs.google.com/file/d/0B02Uc9IrgGXQZjAxRUhtMW96NUk/edit?pli=1#
SuperSU: http://download.chainfire.eu/212/SuperSU/CWM-SuperSU-v0.96.zip
2. Copy the following files (which you downloaded from Step 1) to the root of your micro-SD card:
GT-P5100_P5100XXBLI2-OTA-P5100XWALE2_GLB_268219552.zip
GT-P5100_P5100XXCLI1-OTA-P5100XXBLI2_GLB_279272235.zip
CWM-SuperSU-v0.96.zip
3. Boot your device into download mode and connect it to your computer
4. Unzip the file P5100XWALE2_P5100OLBALE1_XTE.zip (it will unzip to P5100XWALE2_P5100OLBALE1_P5100DXLD3_HOME.tar.md5)
5. Start ODIN, click the PDA button and select the P5100XWALE2_P5100OLBALE1_P5100DXLD3_HOME.tar.md5 which was unzipped in Step 4, then click the Start button and wait until it finishes and reboots your device
6. Disconnect your device from your computer and boot it into download mode again, then reconnect it to your computer
7. In ODIN, click the Reset button, uncheck the Auto Reboot button then click the PDA button and select the GT-P5100_ClockworkMod-Touch_recovery_6.0.1.2.tar file which was downloaded in Step 1, then click the Start button and wait until it finishes, then power down the device.
8. Disconnect your device and boot it into recovery mode (you will now have CWM Touch 6.0.1.2 installed in place of the stock recovery)
9. Flash the OTAs and SuperSU with CWM in the following order:
GT-P5100_P5100XXBLI2-OTA-P5100XWALE2_GLB_268219552.zip
GT-P5100_P5100XXCLI1-OTA-P5100XXBLI2_GLB_279272235.zip
CWM-SuperSU-v0.96.zip
10. Perform a wipe/factory reset in CWM then reboot your device (please take note of step 11)
11. When you select reboot system now, it will ask you if you want to fix the issue of overwriting CWM with the stock recovery, select YES (This step is necessary to retain CWM under a stock ROM)
12. When your device boots up, proceed by setting it up as you do normally
If all goes well, you now have the latest Stock Jelly Bean OTA for your P5100 which will be rooted and have CWM as your recovery.
CREDITS:
Egooktamuck: GT-P5100_ClockworkMod-Touch_recovery_6.0.1.2.tar
Chainfire: SuperSU
SamMobile: All the firmwares
UPDATE:
I re-flashed but in the following order, and included the PIT file in Odin, and the volume is now fixed, I already performed the operation successfully on two more P5100s:
1. Wipe the entire device (factory reset)
2. Flash P5100XWALE2_P5100OLBALE1_P5100DXLD3_HOME.tar.md5 with Odin while also using signed_espresso_20120220_16G.pit
3. Boot normally and setup the device as you would
4. Flash GT-P5100_P5100XXBLI2-OTA-P5100XWALE2_GLB_268219552.zip in stock recovery and boot up normally
5. Flash GT-P5100_P5100XXCLI1-OTA-P5100XXBLI2_GLB_279272235.zip in stock recovery and boot up normally
6. Flash GT-P5100_ClockworkMod-Touch_recovery_6.0.1.2.tar with Odin but with no PIT file
7. Flash CWM-SuperSU-v0.96.zip with CWM then select fix stock recovery when rebooting from CWM

what knows issues that appear ? or bugs ?

Can anyone who has upgraded let me know what is the total ram in task manager....currently on ics its 687 i think....
Sent from my GT-P5100

Any screenies
Sent from my GT-P5113 using XDA Premium App

mab71 said:
Can anyone who has upgraded let me know what is the total ram in task manager....currently on ics its 687 i think....
Sent from my GT-P5100
Click to expand...
Click to collapse
Task Manager shows 685MB

ZeroXtreme said:
Task Manager shows 685MB
Click to expand...
Click to collapse
Thanks....do feel any slowdown?
Sent from my GT-P5100

mab71 said:
Thanks....do feel any slowdown?
Sent from my GT-P5100
Click to expand...
Click to collapse
One word to describe - Awesome.
Sent from my GT-I9100 using Tapatalk 2

SMASHERSONLY said:
Any screenies
Sent from my GT-P5113 using XDA Premium App
Click to expand...
Click to collapse
Attached a screenshot to the OP

mab71 said:
Thanks....do feel any slowdown?
Sent from my GT-P5100
Click to expand...
Click to collapse
Actually, no. No lag or slow down. Way snappier compared to the ICS ROM.

does it have the phone and messaging feature ?

theelitekiller said:
does it have the phone and messaging feature ?
Click to expand...
Click to collapse
Obviously have. Because this is P5100 rom
Sent from my GT-I9100 using Tapatalk 2

New OTA!
Version: 4.1.1
Country/carrier: Germany (DBT)
New PDA: P5100XXCLI3
Needed PDA: P5100XXBLH4
Download

this is not 4.1.1 but 4.0.4 Sorry.

i did all the steps but i didnt do wipe data, so now i have jelly bean with root and cwm without losing my apps.

I've updated to the latest german JB rom.... noticed that in portrait mode, scrolling in homescreen and app drawer has some stutters....anyone have this too?? In landscape, smooth as butter
Sent from my GT-P5100

LuffarJoh said:
New OTA!
Version: 4.1.1
Country/carrier: Germany (DBT)
New PDA: P5100XXCLI3
Needed PDA: P5100XXBLH4
Download
Click to expand...
Click to collapse
Hi, can i use it with my p5110?
Regards,
Mgl2
Sent from my GT-P5110 using xda app-developers app

mab71 said:
I've updated to the latest german JB rom.... noticed that in portrait mode, scrolling in homescreen and app drawer has some stutters....anyone have this too?? In landscape, smooth as butter
Sent from my GT-P5100
Click to expand...
Click to collapse
Did you a Wipe, Reset or stuff like that after flashing the firmware?
maybe it will help with stutters.
what did you use to upgreade to JB? OTA update? Zip-flash? odin?

solitsnake said:
Did you a Wipe, Reset or stuff like that after flashing the firmware?
maybe it will help with stutters.
what did you use to upgreade to JB? OTA update? Zip-flash? odin?
Click to expand...
Click to collapse
Yes, did a wipe. First used odin to flash the needed base. Wiped everything, Then used stock recovery to flash the ota JB file..which JB rom r you using? Now there are 2 I think....phillipines and german
Sent from my GT-P5100

theelitekiller said:
i did all the steps but i didnt do wipe data, so now i have jelly bean with root and cwm without losing my apps.
Click to expand...
Click to collapse
Good to hear it worked for you this way. I just specified a wipe to guarantee no issues arise due to a non-wipe upgrade.

mab71 said:
Yes, did a wipe. First used odin to flash the needed base. Wiped everything, Then used stock recovery to flash the ota JB file..which JB rom r you using? Now there are 2 I think....phillipines and german
Sent from my GT-P5100
Click to expand...
Click to collapse
There three. The others is India
Sent from my GT-I9100 using Tapatalk 2

[Q] Boot loop

I have an uprooted device that keeps rebooting ,I flashed a rom (4.1) the upgraded OTA to 4.1.2 and the rebooting is still there.

Remove SD Card. Enter recovery and clear cache. If still rebooting then factory reset. If Still rebooting, then reflash it back to ICS and start over.

Thanks, I did I reset but still same problem, where can I get that ics?
Sent from my Nexus 4 using Tapatalk 2

Why don't you try to help yourself and us by ...
Telling us what device you have (N8000, N8010, N8013 etc)
Telling us what you tried to flash (JB)
ICS firmware can be downloaded from http://www.sammobile.com

zaki67 said:
I have an uprooted device that keeps rebooting ,I flashed a rom (4.1) the upgraded OTA to 4.1.2 and the rebooting is still there.
Click to expand...
Click to collapse
You have a rooted device ???
OTA upgrade usually fails on rooted phones .
Suggestion wipe the phone and install your original saved firmware .
jje

No the device is not rooted. I upgraded to jb from the German leaked rom and then ota to the latest 4.1.2
Sent from my Nexus 4 using Tapatalk 2

Bootloader fail

I'm seeking help regarding the bootloader for my P3110:
>I can not install any new 4.1.2 roms because the bootloader fails in Odin (these new 4.1.2 firmwares seem to flash bootloader 1st)
>When I install older 4.1.1 firmware, the rom installs but the bootloader fails at the end although the device will boot normally after that.
>Codeworkx's bootloader (from CM10.1 page) will not install on odin either.. I just get an error message.
>Using triangle away on stock 4.0 and 4.1 will not work properly because of my bootloader issues.. (Modified status always comes back)
Maybe I could try flashing a CWM zip of the JB bootloader?? Could someone make or show me how to make one??
I've tried the obvious such as flashing back to ICS stock etc
Any help would be greatly appreciated as I would like to return the device to its original form... but I cannot do this as the device will not let me achieve any OTA updates (always says device has been modified)
Thanks
Matt

AW: Bootloader fail
CWM cant Flash the Bootloader, so a zip is useless. Choose heimdall for flashing the bootloader.

Dexxmor said:
CWM cant Flash the Bootloader, so a zip is useless. Choose heimdall for flashing the bootloader.
Click to expand...
Click to collapse
Thanks but why should that work over ODIN?

AW: Bootloader fail
Thats a good question, but i dont know the answer i prefer heimdall (Linux on my machine).

Dexxmor said:
Thats a good question, but i dont know the answer i prefer heimdall (Linux on my machine).
Click to expand...
Click to collapse
But I think that ODIN does not flash a bootloader because my existing bootloader is damaged

Try flashing any 4.0.4 stock rom then go back to jellybean.
Sent from my GT-I8190 using xda app-developers app

Pezmet said:
Try flashing any 4.0.4 stock rom then go back to jellybean.
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply.. I've done that but even though the firmware installs fine... "DEVICE HAS BEEN MODIFIED" always comes back when trying to OTA update.
When gone from 4.0.4 to 4.1.1 the bootloader fails to install... even though the rom itself has installed and runs
Modified status always comes back and all bootloaders fail to install

Oh.. Then flash any rooted room, use triangle away to reset counter (run the app then go directly to download mode), you will notice that counter and binary should be now 0.
Get 4.0.4 for your region and tablet. ( samfirmware or Samsung-updates). Flash it. Status should be official.
Get any csc chanter from play store and change CSC to your country (not all roms need this).
Update with kies or OTA and hope for the best.
Good luck.
Sent from my GT-P3110 using xda app-developers app

Pezmet said:
Oh.. Then flash any rooted room, use triangle away to reset counter (run the app then go directly to download mode), you will notice that counter and binary should be now 0.
Get 4.0.4 for your region and tablet. ( samfirmware or Samsung-updates). Flash it. Status should be official.
Get any csc chanter from play store and change CSC to your country (not all roms need this).
Update with kies or OTA and hope for the best.
Good luck.
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
Tried that several times... Modified status always comes back

P3113 bootloader instead of P3110
In the 1st few weeks of owning the device I accidentally flashed P3113 firmware instead of a P3110.
So ever since then, when in download mode, PRODUCT NAME = P3113
Do you think I have a P3113 bootloader instead of a P3110??? Is this why I cant flash a new P3110 Firmware (with sbl) because they clash???

P3113 bootloader instead of p3110
Ok so I'm getting closer to understanding why my device is behaving the way it it...
My bootloader shows that it is a P3113 device (the display in download mode)
So when I try to flash stock P3110 roms... it fails on the bootloader... because they dont match.
(My device is the P3110 by the way)
So why cant I flash a P3110 bootloader???
SO CONFUSED!!

Anyone got any more ideas??

[Q] after update to JB, not able to downgrade

Since upgrading to JB 4.1.2, I am not able to downgrade to ICS. After the flashing ICS via odin or for that matter mobile odin, is complete, it goes into a boot loop. Only way way out was again flash Jelly bean, it worked. Is there any firmware with full components like pda separate file, CSC separate file and phone separate file? I have heard that we need to flash these separate files via odin to downgrade. can anybody give a download link for the same?

Do you have a CWM back-up from a previous ROM?
Sent from my GT-P6210 using xda app-developers app

unfortunately no
Sent from my GT-P6200 using xda premium

seking said:
Since upgrading to JB 4.1.2, I am not able to downgrade to ICS. After the flashing ICS via odin or for that matter mobile odin, is complete, it goes into a boot loop. Only way way out was again flash Jelly bean, it worked. Is there any firmware with full components like pda separate file, CSC separate file and phone separate file? I have heard that we need to flash these separate files via odin to downgrade. can anybody give a download link for the same?
Click to expand...
Click to collapse
you must go to stock ricovery ( with power + volum up ) and then wipe data
( your data are remove ( factory riset )
sorry for my bad ENGLISH

But I have heard that if one wipes factory reset through stock recovery, I am afraid one is liable to get bricked devices.
Sent from my GT-P6200 using xda premium

I would research the factory reset option. It shouldn't brick your device.
Sent from my GT-P6210 using xda app-developers app

deleted

S-AJAD said:
don'd worry
if you wipe in stock recovery your divice aren't break
if you wip in cwm or other castom recovery with stock row your tab are breaked
Click to expand...
Click to collapse
I thought it was the opposite... (at least for ICS)

Alway wipe in cwm
S-AJAD said:
don'd worry
if you wipe in stock recovery your divice aren't break
if you wip in cwm or other castom recovery with stock row your tab are breaked
Click to expand...
Click to collapse
NO! Wipe data in STOCK recovery brick your device, but if you wipe in CWM you are safe.
For downgrade use this guide:
http://forum.xda-developers.com/showthread.php?t=1777003

skurys said:
I thought it was the opposite... (at least for ICS)
Click to expand...
Click to collapse
i do this work when i have this tablet
i had the cyanogen mod 10 and 10.1 and paranoid.
when i want back to stock rom i need to do this work and my tab doesn't break
but in JB i dont sure. i think other member are better than me.
sorry for my english

S-AJAD said:
don'd worry
if you wipe in stock recovery your divice aren't break
if you wip in cwm or other castom recovery with stock row your tab are breaked
Click to expand...
Click to collapse
Just to make it clear.. wiping from stock is Safe IF you are in HC or JB ( someone said its safe ) but a big NO in ICS because it causes the tab to be bricked.. wiping from CWM on all roms is SAFE.. pls.. get your facts right..
Sent from my GT-P6200 using XDA Premium HD app

If you want to downgrade from official JB to official ICS, you have to have .pit file
You can search pit file for P6200 in XDA and using odin to flash official ICS with option re-partition checked
First time, when my friend downgrade without .pit file, tab got stuck at SS logo even wipe everything fully. With .pit file, it succeeded

goodwellbest said:
If you want to downgrade from official JB to official ICS, you have to have .pit file
You can search pit file for P6200 in XDA and using odin to flash official ICS with option re-partition checked
First time, when my friend downgrade without .pit file, tab got stuck at SS logo even wipe everything fully. With .pit file, it succeeded
Click to expand...
Click to collapse
Is it necessary to have three different files ie pda, phone and csc when using pit file eith repartition checked?
Sent from my GT-P6200 using xda premium

No, just ICS Stock Rom with .pit file
P6200 pit file in this thread (http://forum.xda-developers.com/showthread.php?t=1667886) works fine

You can downgrade to HC, do wipes and flash ICS.

i usually do encounter this on my 7.7 when i flash hc from ics...what i did was wipe the device using cwm after flashing the older firmware to fix the bootloop...
my friend have tab 7 plus and i'm planning to flash jb on it...is the stock JB recovery free from the brickbug?

JAYZE said:
i usually do encounter this on my 7.7 when i flash hc from ics...what i did was wipe the device using cwm after flashing the older firmware to fix the bootloop...
my friend have tab 7 plus and i'm planning to flash jb on it...is the stock JB recovery free from the brickbug?
Click to expand...
Click to collapse
I guess it is safe becoz someone did it already and it did not got brick.. if i were you.. after flashing jb.. flash the CWM.. then from there do the wiping
Sent from my GT-P6200 using XDA Premium HD app

goodwellbest said:
No, just ICS Stock Rom with .pit file
P6200 pit file in this thread (http://forum.xda-developers.com/showthread.php?t=1667886) works fine
Click to expand...
Click to collapse
I used the pit file and the ics stock and flashed using odin, the flashing went off smoothly with odin saying success. But after booting mine stuck at the samsung animation for eternity. Again I had no other alternative than flash jb back again.
Sent from my GT-P6200 using xda premium

seking said:
I used the pit file and the ics stock and flashed using odin, the flashing went off smoothly with odin saying success. But after booting mine stuck at the samsung animation for eternity. Again I had no other alternative than flash jb back again.
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
Did you check option re-partition in Odin?
By the way, stuck at SS logo is quite often happened if you did not wipe. You should try to perform full wipe.
There is an issue related to wipe using ICS stock recovery, you should use Odin to flash CWM recovery (without .pit file) and use CWM recovery to wipe.

seking said:
I used the pit file and the ics stock and flashed using odin, the flashing went off smoothly with odin saying success. But after booting mine stuck at the samsung animation for eternity. Again I had no other alternative than flash jb back again.
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
when you are stuck in bootloop flash cwm recovery and do a full wipe..that will fix it...avoid full reset using stock recovery to prevent brickbug

SOLUTION:-How to Downgrade galaxy tab plus p6200 from stock JB TO stock ICS OR HC!

::good::good::good::good::good::good::good::good:
To downgrade galaxy tab plus p6200 form jb xxmc3 based version to stock ics :-
Installation instructions :
1.First download the stock ics rom based on ur network carrier,,for assistance i am using INDIA network carrier based rom,,For those who r outside form india choose ur country based rom by clicking the link below http://www.sammobile.com/firmwares/1/
2.once u have downloaded the rom succesfully extract it somewhere on pc ..Put ur tab in download mode open "ODIN.exe" choose pda as ".tar.md5" dont use pit file avoid it also dont tick on repartition...and click on start wait for 5min-----Now ur tab is downgrading and it shall boot,,,,Once its done u will see samsung logo ..if u face any problems like force close etc.,go to SETTINGS-PRIVACY-FACTORY RESET...Thats it U have successfully done>>>
IMPORTANT on't wipe data / factory reset by going to recovery it will leads to permanent brick:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
If u want to make a repartition ur tab using a pit file downlaod the attachment,,,Be carefull !!!!!!!!!

katarusiva said:
::good::good::good::good::good::good::good::good:
To downgrade galaxy tab plus p6200 form jb xxmc3 based version to stock ics :-
Installation instructions :
1.First download the stock ics rom based on ur network carrier,,for assistance i am using INDIA network carrier based rom,,For those who r outside form india choose ur country based rom by clicking the link below http://www.sammobile.com/firmwares/1/
2.once u have downloaded the rom succesfully extract it somewhere on pc ..Put ur tab in download mode open "ODIN.exe" choose pda as ".tar.md5" dont use pit file avoid it also dont tick on repartition...and click on start wait for 5min-----Now ur tab is downgrading and it shall boot,,,,Once its done u will see samsung logo ..if u face any problems like force close etc.,go to SETTINGS-PRIVACY-FACTORY RESET...Thats it U have successfully done>>>
IMPORTANT on't wipe data / factory reset by going to recovery it will leads to permanent brick:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
If u want to make a repartition ur tab using a pit file downlaod the attachment,,,Be carefull !!!!!!!!!
Click to expand...
Click to collapse
i dont see why this is a solution.. you can always downgrade via odin.. solution for what?
Sent from my GT-P6200 using XDA Premium HD app

theejay0625 said:
i dont see why this is a solution.. you can always downgrade via odin.. solution for what?
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
I know that we can always downgrade through "ODIN" no need to say that ....But some of the members asked me how to do that ....Thats why i wrote a post....:highfive::highfive::highfive:

i need a solution infact!
theejay0625 said:
i dont see why this is a solution.. you can always downgrade via odin.. solution for what?
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
Hi
im new to here
I just wana say that its not that much clear! and i need a solution! because when i do this my p6200 reboots and then samsung logo dont go!
it means i cant see anything more than samsung logo.
please gimme a solution for this. i used odin and several roms but finally i had to flash 4.1.2
what should i do to downgrade from 4.1.2 uncomfotable UI to 4.0.4 speedy and likely one ?

salarse said:
Hi
im new to here
I just wana say that its not that much clear! and i need a solution! because when i do this my p6200 reboots and then samsung logo dont go!
it means i cant see anything more than samsung logo.
please gimme a solution for this. i used odin and several roms but finally i had to flash 4.1.2
what should i do to downgrade from 4.1.2 uncomfotable UI to 4.0.4 speedy and likely one ?
Click to expand...
Click to collapse
When u flash HC.. it will always boot loop.. to fix the boot loop problem.. enter recovery power button + volume up.. the wipe cache and wipe partition.. then the boot loop will be fixed.. then upgrade to ICS or JB whatever you want.. by the way.. dont EVER wipe from a ICS stock recovery.. cause this will brick ur tab.. please remember that.. if u want to wipe from a ICS rom.. install CWM then wipe in the CWM recovery.. JB is faster than ICS
Sent from my GT-P6200 using XDA Premium HD app

I have a P6210. How would I flash from UK 4.1.2 back to HC Using a PIT to repartition?

theejay0625 said:
When u flash HC.. it will always boot loop.. to fix the boot loop problem.. enter recovery power button + volume up.. the wipe cache and wipe partition.. then the boot loop will be fixed.. then upgrade to ICS or JB whatever you want.. by the way.. dont EVER wipe from a ICS stock recovery.. cause this will brick ur tab.. please remember that.. if u want to wipe from a ICS rom.. install CWM then wipe in the CWM recovery.. JB is faster than ICS
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
hi sir i am also flash and upgrade my Tab 7 plus from HC to JB
but not done the wipe cach ..so after i flash it with ODIN
it working smooth for some time but it suddenly restart and now stuck at Samsung galay tab plus logo
i tried to go in POWER+VOLUME UP ..RECOVERY MODE ..
But its not coming ..POWER+VOLUME DOWN ...DOWLOAD mode is coming
So i again flash it with ODIN..BUT again its Stuck at Logo
What soution YOu can Give ..Is i have To downgrade it with 4.0.4 ..OFFICIAL Firmware ...
Please Helip

Is there something wrong with the JB? why the downgrade!
Sent from my GT-I9082 using xda app-developers app

aktsa said:
hi sir i am also flash and upgrade my Tab 7 plus from HC to JB
but not done the wipe cach ..so after i flash it with ODIN
it working smooth for some time but it suddenly restart and now stuck at Samsung galay tab plus logo
i tried to go in POWER+VOLUME UP ..RECOVERY MODE ..
But its not coming ..POWER+VOLUME DOWN ...DOWLOAD mode is coming
So i again flash it with ODIN..BUT again its Stuck at Logo
What soution YOu can Give ..Is i have To downgrade it with 4.0.4 ..OFFICIAL Firmware ...
Please Helip
Click to expand...
Click to collapse
Have you tried flashing the CWM? Try flashing the custom recovery.. then try to enter recovery..
Sent from my GT-P6200 using XDA Premium HD app

Oracle1977 said:
Is there something wrong with the JB? why the downgrade!
Sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
Yes, I would like to know also! I am trying the opposite and trying to upgrade my US version of 4.0.4 to the UK version 4.1.2 which is suppose to work, but I can't seem to get my USB to be recognized when I am in the Download mode - Funny thing, the USB is recognized when directly connecting to my computer (ie MTP) and via Kies, but not in the DL mode or Odin.
But if 4.0.4 is more trouble free than 4.1.2, maybe my problem is a good thing?
Edit: Figured it out - I was in Recovery mode instead of Download mode - oh well, 4.1.2 is a little nicer, with a few more features, not notably faster that I can tell as of yet, but I need to play with it, since all I have done so far is to go through it and make sure things work.
I was hoping for multi-window support and better wifi connectivity, but no joy - maybe better wifi after a few more days?.
Does anyone know if 4.1.2 will allow the tab to support 64gb card? I thought that was one area where 4.1.2 had over 4.0.4