Now that CM 10.1 is the only ROM being actively worked on for the A700, I've moved over to it.
Does anyone know of a kernel that allows overclocking of the CPU and/or GPU and is compatible with CM 10.1?
Here's hoping someone takes over now that Iconian isn't being supported anymore. I wish I could but I have no clue what I'm doing
Gavin
Hey dude,
In this topic (post #103, #104) they're talking about a kernel which has the OC and the UV for CM 10.1.
It's not Vorbeth's original stuff (but a lot of his work has been applied), so I think it's al right to give it a try.
Good luck!
Related
Can someone please help me find a stable and functioning kernel with bln support for gt-n7000?
Hi,
did you succeed finding such a kernel or ROM? I am looking for exactly this since the day I first had my N7000.
On a couple of websites they say that CM11 has BLN enabled, but it does not, at least not for the N7000.
Hey guys I'm just wondering if I get the latest siyah kernel on my phone if it would work. The jellybam stock kernel isn't the best battery life for my phone so would this kernel even help with this?
spankamonkey said:
Hey guys I'm just wondering if I get the latest siyah kernel on my phone if it would work. The jellybam stock kernel isn't the best battery life for my phone so would this kernel even help with this?
Click to expand...
Click to collapse
It is very important to read about the whatever it is you are about to flash and know more about your device. If you have read more into siyah you would know that it is an i9300 kernel which is the international S3 you have a i535 device which is the US S3. That kernel is optimized for the quad core processor that the i9300 has while all US versions of the Galaxy S 3 have a duo core processor. I am quite sure that wherever you got info on siyah mentioned what I just pointed out.
Thanks! That probably just saved my phone.... And it was just a thought because I asked my uncle what kernel he used and he said siyah so I didn't really even occur to me that not everything is universal... Do you know of any good kernels that would work on my device?
Well that depends on whether you have a Touchwiz or a AOSP rom. Pretty much all of them work like it suppose to. Since jellybam is an AOSP rom BMS works well.
Ok thanks... I didn't know whether jellybam was aosp or not and I didn't want to start blinding flashing kernels.. that cleared things up, thank you
I just installed cm 10.1 alpha 7 and it works brilliantly no doubt, however, i would like to overclock my phone now. Last i did was with 2.4.6. I haven't found any 3xxx kernels which can overclock. Please help me out here and point me in the right direction. I know the risks of overclocking so there really is no need to remind me. All is ask to tell me of a kernel or app which can onverclock my galaxy sl i9003 beyond the 1000mhz limit with cm10.1 a7 in it. Thanks, appreciate it.
cinecon said:
.... I haven't found any 3xxx kernels which can overclock. Please help me out here and point me in the right direction...
Click to expand...
Click to collapse
There is not 3x kernel can overclock today
http://forum.xda-developers.com/showthread.php?t=2346461
Hi everybody.
I have testing some LineageOS based ROMs lately in my P5110 and P3110 and found no overclock option so far ?
Considering the low hardware profile in our tabs and the actual real overlclock, better user experience and battery tunning / real gain we get with some CyanogenMods 6.0.1, I see no point using, until now, the new LineageOS based ROMs!?
So I ask: Is there any known LineageOS ROM or compatible kernel with overclock potential that allows to improve the user experience as the "old" CM 6.0.1 does ?
Thanks
galoneta said:
Hi everybody.
I have testing some LineageOS based ROMs lately in my P5110 and P3110 and found no overclock option so far ?
Considering the low hardware profile in our tabs and the actual real overlclock, better user experience and battery tunning / real gain we get with some CyanogenMods 6.0.1, I see no point using, until now, the new LineageOS based ROMs!?
So I ask: Is there any known LineageOS ROM or compatible kernel with overclock potential that allows to improve the user experience as the "old" CM 6.0.1 does ?
Thanks
Click to expand...
Click to collapse
no
No luck here as well mate, I've been forced to stick with CM13 since OC and themes are a must for me
Best user experience, for me, is with CM 6.0.1 from "[ROM][P31xx][P51xx][MM][6.0.1][Linaro][SaberMod] CyanogenMod 13" (https://forum.xda-developers.com/showthread.php?t=2686613) and "[ KERNEL - AOSP] Dhollmen Espresso" from (https://forum.xda-developers.com/showthread.php?t=2176563&page=138).
Can run everything I need with good speed and make tweaks to allow battery savings even possible!
Hello everybody.
I have read previous answers, thanks.
Considering the time since the original question, I would ask again:
1- if there is no option so far to add an overclocked kernel to our tabs ?
2- I am not a developer, but maybe I could get the info needed to build my own overclocked kernel and share it with the forum, where to start from ? I think these would really be faster for those already with the proper skills to do it! I mean: do you developers really use your tabs without overclock nowadays ?
Thanks again.
galoneta said:
Hello everybody.
I have read previous answers, thanks.
Considering the time since the original question, I would ask again:
1- if there is no option so far to add an overclocked kernel to our tabs ?
2- I am not a developer, but maybe I could get the info needed to build my own overclocked kernel and share it with the forum, where to start from ? I think these would really be faster for those already with the proper skills to do it! I mean: do you developers really use your tabs without overclock nowadays ?
Thanks again.
Click to expand...
Click to collapse
1-There is still no overclock available.
2-I am not a developer (yet) but I think the tab is fast enough as it is (running Slim7 if you want to know) and I don't think overclock is necessary. The place to start for building a kernel is google. I think I saw a guide in the past.
Also, keep in mind that devs make things because they want to and get no reward for that. So don't ask or press them to make anything. If you create your own kernel it will be greatly appreciated, but I think you wouldn't like people constantly asking you for something (and yes, overclock has been asked for a lot of times in the past).
Is there any custom kernel for CM13 on the Tab2 10.1?
I really would like to OC my Tab2, but seriously, there seems to be not a single kernel that works with CM13...
There is one out there, but its for CM11 if I remember right. The Dhollmen-P51xx-Kernel_20131026 - but it doesn't work for me.
All I get is a pretty scary colourd and blurred display output on boot.
So, does anyone know a kernel for CM13 with OC feature? Or can anyone explain me, how to make my own OC-enabled kernel?
Like editing some files in the stock CM13 kernel or something like that? Is it that easy or not?
Thanks for reading
Problem solved!
Problem solved, Dhollmen's latest Kernel DOES work for CM13.
It got OC ability and its max. freq is at 1520Mhz, meaning its like you got "a third core" :good: :highfive:
Found this link on his second post:
https:// www .androidfilehost. com/?w=files&flid=26201
The kernel runs really good with CM13, I'll check LAOS14.1 soon.