[Q] Need emergency help to unbrick Galaxy 3 GT-i5801. - Galaxy 3 Q&A, Help & Troubleshooting

I have been using Samsung Galaxy 3 GT-i5801 for 2 years now.. It was having Android 2.1. Today I decided to install custom ROM to upgrade to Android 2.3.7. Used the below steps in the process:
1. Rooted the device using SuperOneClick
2. Installed ClockworkMode ROM manager 4.3.3.0. Installed G3RM as well.
3. I could not take the backup. G3RM when tried to open was opening a html code when i clicked the options. ClockworkMode did not have the option for Galaxy 3.
4. Downloaded the CM7.2.0-GT-i5800_Alpha8.3_CWM.zip from google code pages for cm7-i5800 (92.2 MB in size).
5. Copied the zip file to the base directory of SD card and renamed it to update.zip. Using CWM wiped the data/factory reset. Phone rebooted to Android 2.1 with all data erased.
6. Then I updated the ROM using CWM. It didn't throw any errors. Mobile rebooted. But it gets stuck in opening screen forever (display contains just GT-I5801 and Samsung). I assume this is a soft brick. As I recollect now, I forgot to clear the cache before the upgrade. Will this be a problem?
7. Tried to recover using Power + Vol Up+ Vol Down + Menu combination. This process is also stuck with a message "FORCED UPLOAD by KEY PRESSING".
8. I suspect the device is bricked now.
I am new to android ROM updates. I am looking forward for your help to unbrick the device now. Please suggest me the steps to unbrick the device (Or a link which i should follow).
Regards,
Shreekanth

At Step 7, try use ODIN and flash a Rom through it. Theres a guide somewhere on this forum. It should help save your.. Oh wait. I think you have to get a special i5801 ROM, but I might be wrong.

My phone does not boot up now.. Will it be possible to use ODIN to flash a ROM at this stage? Before step 6, I had cleared the wiped the data / factory reset using CWM. That time it rebooted to Android 2.1. Later i copied the ROM and tried the ROM update. I am facing the problem since then.
Since the display turns on, I assume this is kind of soft brick. So hoping for a fix. I am searching the entire forum for any possible answer. Please help me with your suggestions.
Regards,
Shreekanth
AzNTypeR said:
At Step 7, try use ODIN and flash a Rom through it. Theres a guide somewhere on this forum. It should help save your.. Oh wait. I think you have to get a special i5801 ROM, but I might be wrong.
Click to expand...
Click to collapse

Hey,
After flashing/updating. Do factory reset/delete data all user data thing from recovery itself.
Also clear the cache.
It will boot for sure. Let mw knw if it did not help.
Sent from my GT-I5800 using xda app-developers app

tollboy said:
Hey,
After flashing/updating. Do factory reset/delete data all user data thing from recovery itself.
Also clear the cache.
It will boot for sure. Let mw knw if it did not help.
Sent from my GT-I5800 using xda app-developers app
Click to expand...
Click to collapse
The problem is resolved now and I am much relieved .. This time I have used ODIN. It detected the phone and now I have updated to Android 4.1.1.
A xda thread "How to use ODIN for dummies" was very helpful. Thanks a lot for all of your suggestion.

shreekanthts said:
The problem is resolved now and I am much relieved .. This time I have used ODIN. It detected the phone and now I have updated to Android 4.1.1.
A xda thread "How to use ODIN for dummies" was very helpful. Thanks a lot for all of your suggestion.
Click to expand...
Click to collapse
tollboy said:
Hey,
After flashing/updating. Do factory reset/delete data all user data thing from recovery itself.
Also clear the cache.
It will boot for sure. Let mw knw if it did not help.
Sent from my GT-I5800 using xda app-developers app
Click to expand...
Click to collapse
Great...Enjoy!!!
Welcome to custom ROMs world.
Mark it as closed.
Regards,
:good::good:

IMPORTANT
excuse me but while installing kyrillos rom something happened and after i reboot my galaxy 3 on my screen after gt-15801 and samsung a
G3 MOD appears. thats sit its struck there PLZ HELP

addyrox said:
excuse me but while installing kyrillos rom something happened and after i reboot my galaxy 3 on my screen after gt-15801 and samsung a
G3 MOD appears. thats sit its struck there PLZ HELP
Click to expand...
Click to collapse
Did you try wiping data, cache and dalvik?
Sent from my GT-I5800 using xda app-developers app

IMPORTANT
I HAD DONE EVERY THING BY THE STEPS OF KYRILLOS ROM.... BIT ITS STRUCK AT G3 MOD SCREEN AFTER I INSTALLED ROM 9.0 IN MY GALAXY 3!!!!!!!!! CAN I TRY RE-FLASHING THE ROM?//
yes i wiped the all the cache but still it didn't work. CAN U TELL ME SOME WAY TO RESTORE IT TO STOCK ROM 2.1????????????
PLZ HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

You should try flashing one of these http://forum.xda-developers.com/showthread.php?t=1497261
Sent from my GT-I5800 using xda app-developers app

Related

(Q) How To Correct Corrupted/Faulty DATA Partition on P6800?

Hello..
I'm getting ERROR message everytime I try to enter the recovery mood. Its happened 2 days ago. I've tried to flash the stock ROM for several times and hoping that could correct this issue. Unfortunately, that couldn't help and leaving me dissapointed.
I noticed this issue for the first time when my device cannot process the command line "Updating BLA BLA..." during entering the recovery mood. Its stop there and nothing is happened for about more than 5 minutes until I forced it to shutdown by long pressing the power button. Then, I tried to enter the recovery mood for the second time. You guys know what happened to my device?
I predict that situation is okay until when I try to WIPE all data and encountered an error message with the red text asking me to 'use UI to format system and reboot'.
But, I still don't know what to do. I'm hoping that you guys with kind hearted to please do help me. Thanks in advance.
One more thing, please teach me how to make this flash counter mark (!) disapear......... THANKS.
Sent from my GT-P6800 using XDA Premium HD app
Mind was replaced new mainboard.
If you cannot, I recommend you read Samsung note forum. There are thread about 'parted' command to repartition to skip bad block. Mind was success to skip and boot but lost a lot of gigabyte.
Sent from my GT-P6800 using xda app-developers app
Thanks for replying to my question.. Will read the forum for sure.. Thank you.
Recently I faced the similar problem twice. The 1st time was using ODIN to flash the latest CWM and then format the DATA folder through the advance setting... solved the problem...
2 days ago, I faced the same problem again and the solution above won't help at all. I use the ODIN flashed the original Samsung firmware and do reset to default through the original recovery and it works. But I lost all my internal data in the internal memory.
So, you could try the suggestion above if it helps. Just the 2nd one WILL DELETE ALL DATA and it is UNRECOVERABLE. So you been warned. Don't blame me if you lost your multi-billion project file.
marwanxx said:
Hello..
I'm getting ERROR message everytime I try to enter the recovery mood. Its happened 2 days ago. I've tried to flash the stock ROM for several times and hoping that could correct this issue. Unfortunately, that couldn't help and leaving me dissapointed.
I noticed this issue for the first time when my device cannot process the command line "Updating BLA BLA..." during entering the recovery mood. Its stop there and nothing is happened for about more than 5 minutes until I forced it to shutdown by long pressing the power button. Then, I tried to enter the recovery mood for the second time. You guys know what happened to my device?
I predict that situation is okay until when I try to WIPE all data and encountered an error message with the red text asking me to 'use UI to format system and reboot'.
But, I still don't know what to do. I'm hoping that you guys with kind hearted to please do help me. Thanks in advance.
One more thing, please teach me how to make this flash counter mark (!) disapear......... THANKS.
Sent from my GT-P6800 using XDA Premium HD app
Click to expand...
Click to collapse
Try to reflash and repartition using original Pit file and original firmware( assume is Honeycomb ) for ur tab using Odin 3.17, I've encountered this kind of problem before and voila! It nvr happen again.
Sent from my GT-P6800 using XDA Premium HD app
where to get odin 3.17?
thanks, btw..
*Question: I'm using Odin 3 v1.85. Is only the Odin 3 v1.70 could correct the problem?
marwanxx said:
where to get odin 3.17?
thanks, btw..
*Question: I'm using Odin 3 v1.85. Is only the Odin 3 v1.70 could correct the problem?
Click to expand...
Click to collapse
Here:
http://forum.xda-developers.com/attachment.php?attachmentid=428348&d=1288241246
ps. This DID work for me. I was unable to flash a working ICS with v1.85 but this version 1.70 worked.
UPDATE: My P6800 No longer powers on. No Recovery, No Download mode. nada ;(
kable said:
Here:
http://forum.xda-developers.com/attachment.php?attachmentid=428348&d=1288241246
ps. This DID work for me. I was unable to flash a working ICS with v1.85 but this version 1.70 worked.
UPDATE: My P6800 No longer powers on. No Recovery, No Download mode. nada ;(
Click to expand...
Click to collapse
there's another thread with this problem in 'general' will edit with link momentarily. i'm having the /data format/mount error, and i'm afraid to try flashing ICS with a previous ODIN version as i CANNOT afford to loose this device.. from what i understand... THIS is the superbrick bug.... and with no warranty for customers in the US.... ugghhh..
There is a way to fix it . You need to bet it JTAG ed . I cant vouch for the guy but there is someone
On XDA that does offer that service . I dont have the link right now but do a search and you can find
It I hope . I will look for the link later . Dont give up there is hope .
http://www.jtagbox.com/jtag-news/ri...brick-dead-boot-repair-supported-world-first/
I have been looking at this.

[Q] Remove a boot problem

I installed a wrong program through CWM and after that there is a yellow watermark on the phone. (attached show the screen).
Pleaaaase help me to fix the phone. I tried many roms but no results.
My tablet is GT-N8000.
Can you provide more information. Like what you flashed how you done it.and what you can and can't do with the tab as it is.Like do you have cwm can you get Odin Joe's to work.
Kies has a emergency recocery try that first if no go try flashing a stock rom with Odin.just guessing with the partial info you provided
Be careful and good luck
erica_renee said:
Can you provide more information. Like what you flashed how you done it.and what you can and can't do with the tab as it is.Like do you have cwm can you get Odin Joe's to work.
Kies has a emergency recocery try that first if no go try flashing a stock rom with Odin.just guessing with the partial info you provided
Be careful and good luck
Click to expand...
Click to collapse
I accidentally installed busybox by CWM but it was designed for galaxy tab 10.1 instead of galaxy note 10.1. Now, the device has some problems like it does not detect the sim cart and so on. I can install new frameworks and I have CWM but nothing happens when I install new framework or wipe the device. Also, I tried a stock rom but .... .
I really need help.
sorry for bad english.
Never would have guessed busybox that is usually pretty generic and doesn't have much to do with nonroot apps would cause issues like what you seem to be experiencing.. crazy stuff but good luck!
If nothing else Odin back to newest stock using the stock Odin package that is usually found among your device "stickied" threads. I don't have a gnote but I have had many galaxy devices and Odin is the cure for all ills
Sent from my Galaxy Nexus using Tapatalk 2
How can I reset the device to first time run state. Like it asked me about personal info and gmail account at start up?
each time I install new framework it begins to the OS without asking about these info.
Could always try to install busybox from the market.. Exactly what zip did you use and where did it come from please I would like to look inside it
Sent from my Galaxy Nexus using Tapatalk 2
wizayne said:
Could always try to install busybox from the market.. Exactly what zip did you use and where did it come from please I would like to look inside it
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Here is the zip file, I tried to install ubuntu and I followed an instruction in youtube but it was for galaxy tab 10.1 instead of galaxy note. I acted like a stupid. I'm totally messed up.
here is the link and file:
mirror20.downloadandroidrom.com/download/GalaxyTab10.1/tools/su_busybox_misc-sam_tab_10.1-061611.zip?token=162686692
stulker said:
Here is the zip file, I tried to install ubuntu and I followed an instruction in youtube but it was for galaxy tab 10.1 instead of galaxy note. I acted like a stupid. I'm totally messed up.
here is the link and file:
mirror20.downloadandroidrom.com/download/GalaxyTab10.1/tools/su_busybox_misc-sam_tab_10.1-061611.zip?token=162686692
Click to expand...
Click to collapse
FLASH STOCK IN ODIN.
Sent from my GT-N7100 using XDA Premium HD app
Mister_Mxyzptlk said:
FLASH STOCK IN ODIN.
Sent from my GT-N7100 using XDA Premium HD app
Click to expand...
Click to collapse
NOT WORKED!!
GOD DAMMIT. I wonder why the device run into the OS and not asked me about my personal info like the first time that I started the phone. can you tell me how to delete all data in the device even the download counter?
stulker said:
NOT WORKED!!
GOD DAMMIT. I wonder why the device run into the OS and not asked me about my personal info like the first time that I started the phone. can you tell me how to delete all data in the device even the download counter?
Click to expand...
Click to collapse
Flash stock in ODIN. Wipe data/factory reset in stock recovery. Reboot. Enjoy.
Check Triangle Away thread for flash counter. You didn't do your homework. You should learn how to recover your device BEFORE you frak it up. Good luck.
Sent from my GT-N7100 using XDA Premium HD app
There is point when I start in system recovery it shows:
E: failed to mount /efs (Invalid argument)
is it ok?
also the yellow hint in the screen that I showed in the first comment indicates a software error.
Mister_Mxyzptlk said:
Flash stock in ODIN. Wipe data/factory reset in stock recovery. Reboot. Enjoy.
Check Triangle Away thread for flash counter. You didn't do your homework. You should learn how to recover your device BEFORE you frak it up. Good luck.
Sent from my GT-N7100 using XDA Premium HD app
Click to expand...
Click to collapse
I think language barrier is keeping open from understanding
OK go here follow instructions for flashing Tom with Odin.download stock rom. You do not have to flash cwm flash stock rom instead boot your tablet
Never flash your device or install software until you know how to revert back
I do not recommend new to android people to tinker with this device. Stay stock for now
http://forum.xda-developers.com/showthread.php?t=1831152
Off topic hi Mister prp area here. I love Louisville
erica_renee said:
I think language barrier is keeping open from understanding
OK go here follow instructions for flashing Tom with Odin.download stock rom. You do not have to flash cwm flash stock rom instead boot your tablet
Never flash your device or install software until you know how to revert back
I do not recommend new to android people to tinker with this device. Stay stock for now
http://forum.xda-developers.com/showthread.php?t=1831152
Off topic hi Mister prp area here. I love Louisville
Click to expand...
Click to collapse
Thank you for your help. But I think I have a different problem. I flashed stock rom (several big roms about 1GB) but nothing happened. When I try to wipe data/factory reset it shows E; failed to mount /efs (Invalid argument). I think I need to mount /efs and format it.
I think I missed some files in the efs folder. the phone status shows that some basic info are missed from the phone. check the attached.

[Q] Help please

Hello, I am brand new here and I have to a serious problem with my galaxy s3 (verizon). Today I rooted and installed clockwork recovery and created a backup within the app everything seemed to well and I rebooted. Then I noticed I could get custom roms in clockwork mod and tried getting cyanogen mod for it. Downloaded and continued to install. Then when it booted I got a cyanogen mod boot screen loop . So I said ok and went to recovery and tried to restore my phone from the backup I made only to find that "no files were found" in clockwork recovery. So at this point I just want my phone to boot up and work with my data on it. Is there a way to remove cyanogen mod or even use my backup that was created and in fact does take up space on my sd card but can't seem to find. I thanks in advance .
Ok after some searching it seems that I have forgotten to do something with the boot.img file in the zip. If someone could give me instructions on what to do with it I would really appreciate it. Lol I know most of you are pulling your hair out about my mistakes but hopefully this can be resolved soon.
Nothing with a boot.img that's for HTC devices
Did you clean wipe/facotry reset before installing cm?
Sent from my SCH-I535 using xda app-developers app
I have not. But if I do that that means I lose everything correct and cannot get it back? Or is there a way I can do a restore after I wipe and I get it back? After looking at this question I realize it sounds dumb lol. Also I just did this using a download from clockwork mod and after I did it I looked back at cyanogen mods website and there are more steps involved such as flashing certain files (which was not done because I did not know) I though if I downloaded it from clockwork mod that was the only step I had to take.
staplehead said:
I have not. But if I do that that means I lose everything correct and cannot get it back? Or is there a way I can do a restore after I wipe and I get it back? After looking at this question I realize it sounds dumb lol. Also I just did this using a download from clockwork mod and after I did it I looked back at cyanogen mods website and there are more steps involved such as flashing certain files (which was not done because I did not know) I though if I downloaded it from clockwork mod that was the only step I had to take.
Click to expand...
Click to collapse
You have to clean install you can't just flash roms over each other. That was the reason for your bootloop and nope bud you've most likely have to clean install now. That backup should be somewhere if just click restore and it should find your backup?
Sent from my SCH-I535 using xda app-developers app
Ok that got me to boot tyvm . So am I good to go now? And I just start off new?
staplehead said:
Ok that got me to boot tyvm . So am I good to go now? And I just start off new?
Click to expand...
Click to collapse
Yup you have sorry next time make sure to back up try the app titanium backup on the play store to have backups of your apps with data
Sent from my SCH-I535 using xda app-developers app
ok im up and running now except neither the home button nor the keyboard work. i have googled some results but none of which work .
Which rom did you flash exactly?
Sent from my SCH-I535 using xda app-developers app
Official stable release for the Verizon gs3 from http://get.cm/?type=stable
staplehead said:
Official stable release for the Verizon gs3 from http://get.cm/?type=stable
Click to expand...
Click to collapse
Did you flash gapps?
If not flash these
http://goo.im/gapps/gapps-jb-20121011-signed.zip
Sent from my SCH-I535 using xda app-developers app
No sir. You must be VERY frustrated right now with me lol. Could you tell me where I can get the gapps file and how to flash it please. I would really appreciate it.
Ok flashed now everything works... Except the keyboard still .
SUCCESS! I Reflashed everything but between flashing I cleared delvik cache before and after flashes
staplehead said:
SUCCESS! I Reflashed everything but between flashing I cleared delvik cache before and after flashes
Click to expand...
Click to collapse
Bingo. Always clear delvik cache and cache when flashing. It's also good to wipe data when upgrading a Rom and a must when going to a different Rom.
Via my Google Galaxy S3 running magic beans
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

[Q] Can't seem to get the backup working with CWM

Hi, i'm a noob fresh out of youtube and I have successfully rooted my phone and gotten CWM and the Recovery Image flashed but the problem comes into play when I try to make a backup of my stock rom and my phone reboots into the recovery mode and it gives me the options to
1. reboot
2. reinstall
3. delete user data
4. wipe caches
and it says # Manual Mode #
Appling CSC...Installing CSC but it doesn't do anything and i've let it sit there for a minute nothing even pops up. Help please? I'm kinda at a loss here. lol
You don't have a custom recovery, look at one of the many rooting guides here on how to get clockwork recovery
Sent from my Nexus 4 using xda premium
demkantor said:
You don't have a custom recovery, look at one of the many rooting guides here on how to get clockwork recovery
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Ok, cool. Thanks, i know for a fact that i'm gonna need someone to hold my hand through this thing -__- but hey it's a learning experience. lol :good:
Jon Dubb said:
Ok, cool. Thanks, i know for a fact that i'm gonna need someone to hold my hand through this thing -__- but hey it's a learning experience. lol :good:
Click to expand...
Click to collapse
Hey so I tried to get the custom recovery...am I supposed to delete the old "recovery" file and place the modded one there or am I just supposed to leave it alone? I have the update.zip file in the root of my sdcard but still I tried to boot it into the cwm recovery mode and still no dice.
Replace it, for some more detail see post 36 in this thread
http://forum.xda-developers.com/showthread.php?p=40198560
Now you shouldn't need to go through the whole process but it may help you understand
Sent from my Nexus 4 using xda premium
......so i deleted the recovery file and left the new recovery file and now my phone is soft bricked....*sigh*....help?
Follow the full instruction from the post I linked you, soft bricked this phone more times than I can count, the method I laid out there never failed me with both Linux and windows and takes me under 10 min from start yo finish
Sent from my Nexus 4 using xda premium
Ok, nvm looked at another xda thread and actually managed to fix it. thanks!

How many people have buggy stock recovery?

I went into stock recovery yesterday, after purchasing the phone to wipe cache.
I like to do this with all my new phones first.
When I pressed on wipe cache, it brought me to a menu that asked Mr what package to install, and was showing me my SD card.
I then tried to data factory reset, which from my experience with other phones acted as though it was wiping cache??
It seems the recovery has 1 to many install from SD card options, and is throwing the menu off.
Can anyone else confirm this?
From what I can see only an update would fix this.
Sent from my XT1032 using XDA Premium 4 mobile app
Can confirm that selecting "wipe cache partition" shows SD content. Don't want to try the factory reset though.
Reflashed stock recovery twice, it seems broken by design
This issue has to be reported to Motorola.
I just sent them a link to this thread via Twitter & FB.
//EDIT:
Got a response, guys
a1Pha said:
I just sent them a link to this thread via Twitter & FB.
//EDIT:
Got a response, guys
Click to expand...
Click to collapse
Thanks for sending that. Makes you wonder how they missed that??!
Also if they bother testing the phones
Sent from my XT1032 using XDA Premium 4 mobile app
markdexter said:
Thanks for sending that. Makes you wonder how they missed that??!
Also if they bother testing the phones
Sent from my XT1032 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hm, I don't think the recovery image is part of the QA process - it is simply not meant for end users =/
a1Pha said:
Hm, I don't think the recovery image is part of the QA process - it is simply not meant for end users =/
Click to expand...
Click to collapse
True......... but....I bought my phone out right, I want it to work!!
Sent from my XT1032 using XDA Premium 4 mobile app
recovery bugged
same here , the listing in recovery just isnt acurate to the job it performs ! - crazy slip up from Moto on this one i think .
My People! I have come for you!
Yes it is buggy, however totally operable!
"What? What did you say Ehsan? What knowledge do you have to bestow upon us, oh learned man of the great metropolis?"
Simple really. Whatever you want to select, just select the option above. Wipe cache is Wipe Data/Factory Reset, and Wipe Data/Factory Reset is Apply update via ADB.
So while I sit here and bask in the rays of my awesomeness, you should go and spread the word.
Excuse my overtly conceited bragging. I only got there coz of you lot anyway :angel:
up one ..
So each option is just the line above ... seems okay. but what a mistake from MOTO'
time to test now
thanks
==PEACE==
terminal 7 said:
seems okay. but what a mistake from MOTO'
Click to expand...
Click to collapse
They're humans.
Think about the bug when Google forgot december in its first 4.2 update...
Questions should go in Q&A section .. please have a look at the 'FORUM RULES' ..
THREAD REPORTED ! .
thank you,
Mr.Gm.
I solved it like this
markdexter said:
I went into stock recovery yesterday, after purchasing the phone to wipe cache.
I like to do this with all my new phones first.
When I pressed on wipe cache, it brought me to a menu that asked Mr what package to install, and was showing me my SD card.
I then tried to data factory reset, which from my experience with other phones acted as though it was wiping cache??
It seems the recovery has 1 to many install from SD card options, and is throwing the menu off.
Can anyone else confirm this?
From what I can see only an update would fix this.
Sent from my XT1032 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
try putting the option apply update from ADB, will show you the option data factory reset
jpangulo said:
Wow, my girlfriend phone has the same issue.
If I update to KK the issue is fixed?
Thanks
Sent from my Casio FX85ES Calculator using a formula ( )
Click to expand...
Click to collapse
Yes - it's fixed in the KK stock recovery.
HELP
Yesterday i got 4.4.4 ota and downloaded it. but since i was on twrp, i tried moto tool to flash stock recovery.. but now when i open recovery it shows an android with warning sign.. whats wrong?? where can i get the stock recovery?
try flash your fone using fastboot and not a twrp recovery

Categories

Resources