Related
DISCLAIMER: Please note that this guide contains information gathered from all the HTC ChaCha (Status) sections, which means that a lot of users have contributed to this. I have only gathered all the information here so it would be easier for new/old users to check specific problems/questions. Please give thanks to the "community".
Step 1:
Go to This Link and Unlock your device With HTCDev Unlock Method. Don't forget to click thanks.
http://forum.xda-developers.com/showthread.php?t=1449681
Step 2:
Download the attachments
- Extract PH06IMG.zip in the folder you used for HTCDev Unlock.
- recovery.img should appear there.
- Hold CTRL+Shift and right click in that Folder and open Command Prompt
- Go to Step 3
Step 3:
- Go to Settings -> Power -> Uncheck Fast boot
- Turn off your phone
- Press and hold Volume Down button and press Power button
- Select Use Volume keys to highlight FASTBOOT
- Press Power Button
Step 4:
- After you're in FASTBOOT connect your phone with your PC
- Go to Command Prompt you opened in Step 2
- Type: adb devices
- If you get your device listed there, you are going the right way then
- Type: fastboot flash recovery recovery.img
- Done now you have Clock WorkMod Recovery Installed in your phone.
Step 5:
- Download latest superSU flashable zip from this link Download
- Put the downloaded file in your SD Card.
- Perform 3 Sub steps in Step 3 again.
- Hightlight recovery and select with Power button.
- Select: Install zip from SD Card
- Locate the downloaded file and press enter
- Hightlight Yes and press enter.
- Congrats You have rooted Your Phone Successfully.
All these things are collected from HTC Chacha Section. I do not take the credit. I just collected the data and defined it in a simple way.
B'cuz when i first tried to Root my HTC ChaCha which came with S-ON. I disappointed to see that S-ON is impossible without XTC Clip. But then tried out many things and finally found out that way to root HTC Chacha S-ON..
To Install Custom ROMs refer to this thread please.
http://forum.xda-developers.com/showthread.php?t=1255107
If u like my thread, Please click thanks :good:..
New SuperSU link updated.
R u sure it will work on s-on....i just bought the htc chacha two days back...just want to root it...my endroid version is android2.3.3......its showing S-ON in bootloader...
Just unlock the damn boot loader and you can root it.
ok, now Stick it.
tutorials should be ready available.
Thanks.
munishjoshi said:
R u sure it will work on s-on....i just bought the htc chacha two days back...just want to root it...my endroid version is android2.3.3......its showing S-ON in bootloader...
Click to expand...
Click to collapse
Definitely...
I've posted what worked for me...
n m sure will work for u as well..
I joined just a few days ago and I can tell you that you can root the ChaCha with S-ON. It's a matter of reading the guides and tutorials, they are already readily available.
Dear Step 5 is not working for me..
IN CWM-based Recovery
when click on install from zip sd card its showing an cap with circle
please help to root it now...
munishjoshi said:
Dear Step 5 is not working for me..
IN CWM-based Recovery
when click on install from zip sd card its showing an cap with circle
please help to root it now...
Click to expand...
Click to collapse
May be you aren't doing it d ryt way... highlight install zip from sd card and press Enter key on physical QWERTY board of ChaCha..
Feed Back will be appreciated..
munishjoshi said:
Dear Step 5 is not working for me..
IN CWM-based Recovery
when click on install from zip sd card its showing an cap with circle
please help to root it now...
Click to expand...
Click to collapse
Don't use the power button in CWM. Use the enter key, as stated above.
thanks alex..its done but i m not able to sync my exchange server mail account on it now...need help
munishjoshi said:
thanks alex..its done but i m not able to sync my exchange server mail account on it now...need help
Click to expand...
Click to collapse
Which ROM u r using now?
i m using stock rom..exchange server is working fine now..i think problem wid d server..i dnt want any custom rom coz i had deleted unwanted application via link2sd & get more internal memory...having around 18 application & games..its showing 80mb now....
help plz
hello how to install a arabic rom after this root unlock
10x android ver 2.3.5
1.54.40.1.2
base 47.23.35.303317
superuser automatically deleted-please help
My superused automatically deleted from the htc chacha..i had tried a lot to intall it again by cmw but still its not showing...please help for re root it...
can anyone upload video tutuorial for HTC Chacha S-ON becoz i dont wanna lose any step while rooting my device
munishjoshi said:
My superused automatically deleted from the htc chacha..i had tried a lot to intall it again by cmw but still its not showing...please help for re root it...
Click to expand...
Click to collapse
You can try installing it from the Market.
thanks Alex..its working now after 2-3 reboots...hey alex i have 95mb free memory after around 35 apps & games through link2sd...is it gr8????
Update your binaries in superuser as well. Settings -> Su binary.
already update bro....
I can't get the freakin Sync to work...
Prerequisites
- Charge your device to a minimum of 90% as since the procedure is bit lengthy, the phone will consume more battery than the normal usage. Lesser battery will lead to the turning Off of the device in the middle of the firmware update process.
- Back up all your data which is there in the phone memory, as in an unlikely event if the data gets lost then you can easily restore the backup.
- Up next is you need to ensure that the USB Debugging is enabled in your phone. The USB Debugging can be enabled from the path of Settings > Applications > Development > USB debugging. Apart from this you also need to ensure that your computer has ADMIN privileges and USB Read / Write Access. It’s not recommended to use computers which have limited access.
Instructions For Custom ROM users
Just in case if you are on any of the custom ROMs then you need turn Off your phone so that you can then enter into the recovery mode. The recovery mode can be entered by pressing Volume UP Key + Middle button, and holding both simultaneously press the Power Button. If the device boots normally then you need to again try to enter the same.
In the recovery mode, select the options like Wipe data/factory reset, Wipe Cache partition and then select reboot system now to reboot the phone. You can select the options using the Volume keys and can select the appropriate option by pressing the Power button. This basically clears off all the cache data which is there in the phone so that the room can be made to accommodate this all new custom ROM firmwares
Procedure For Updating
STEP 1: Official Firmware Installation
First up you need to update your phone with the 2.3.x version of firmware (And not on Froyo 2.2.x). You need to follow the instructions which are mentioned below in the form of Links. Please note that it’s a base firmware and you need to install it
STEP 2:Install ClockWorkMod 5 Recovery Image
First up you need to download the beni_cwm-5_ext4_v2.tar & odin+beni.ops.zip.Extract the files and Find Odin 4.38.exe And BENI_v1.0.ops in your Extracted Folder.
Now, Switch off Your Fit And Enter into Download Mode By Pressing Power+Menu Button+Volume Down Button Until Downloading Mode Appears.Open S5670_Odin_Multi_Downloader_v4.38.exe.Place BENI_v1.0.ops on OPS tab.Check the One Package Option.Place beni_cwm-5_ext4_v2.tar on One Package tab.Connect the device to PC which you have put in Downloading Mode.Press Start and wait for flashing process is finished.
After this you will have to proceed to the next step which is mentioned Further
STEP 3:Installation Of CM 9 ICS Firmware
1.First up you need to download Zip file which is mentioned below in your computer
https://hotfile.com/dl/151919225/1624f9b/cm_beni-beta4.zip.html
2.Now, once you are done with downloading the above file in your computer, you need to now copy the file in your phone and ensure that you are not placing these file deep into the phone. Please note that you should not modify or rename the files which you have downloaded or else there is a high probability that the file would not be supported.
3.After this Enter in Recovery Mode by Holding Power Off + Menu Button Until Recovery Mode Appears.
4.In the recovery mode, you will have to choose “choose zip from SD”. Now, from the list of files and paths you will need to first select the file which is named as “cm_beni-beta4.zip (or which You Have Copied to SD Earlier)”. Ensure that you select the file properly.
5.Now, as soon as the process is over.Select Wipe Data/Factory Reset And Wipe Cache Partition.After All Done Select “Reboot System Now”
So, there you go as soon as the phone is rebooted you will see that the firmware is updated with the latest version of Android 4.0(ICS 4.0.3)...
No Need To Say THANKS Just Press It..
mohitawasthi said:
Prerequisites
- Charge your device to a minimum of 90% as since the procedure is bit lengthy, the phone will consume more battery than the normal usage. Lesser battery will lead to the turning Off of the device in the middle of the firmware update process.
- Back up all your data which is there in the phone memory, as in an unlikely event if the data gets lost then you can easily restore the backup.
- Up next is you need to ensure that the USB Debugging is enabled in your phone. The USB Debugging can be enabled from the path of Settings > Applications > Development > USB debugging. Apart from this you also need to ensure that your computer has ADMIN privileges and USB Read / Write Access. It’s not recommended to use computers which have limited access.
Instructions For Custom ROM users
Just in case if you are on any of the custom ROMs then you need turn Off your phone so that you can then enter into the recovery mode. The recovery mode can be entered by pressing Volume UP Key + Middle button, and holding both simultaneously press the Power Button. If the device boots normally then you need to again try to enter the same.
In the recovery mode, select the options like Wipe data/factory reset, Wipe Cache partition and then select reboot system now to reboot the phone. You can select the options using the Volume keys and can select the appropriate option by pressing the Power button. This basically clears off all the cache data which is there in the phone so that the room can be made to accommodate this all new custom ROM firmwares
Procedure For Updating
STEP 1: Official Firmware Installation
First up you need to update your phone with the 2.3.x version of firmware (And not on Froyo 2.2.x). You need to follow the instructions which are mentioned below in the form of Links. Please note that it’s a base firmware and you need to install it
STEP 2:Install ClockWorkMod 5 Recovery Image
First up you need to download the beni_cwm-5_ext4_v2.tar & odin+beni.ops.zip.Extract the files and Find Odin 4.38.exe And BENI_v1.0.ops in your Extracted Folder.
Now, Switch off Your Fit And Enter into Download Mode By Pressing Power+Menu Button+Volume Down Button Until Downloading Mode Appears.Open S5670_Odin_Multi_Downloader_v4.38.exe.Place BENI_v1.0.ops on OPS tab.Check the One Package Option.Place beni_cwm-5_ext4_v2.tar on One Package tab.Connect the device to PC which you have put in Downloading Mode.Press Start and wait for flashing process is finished.
After this you will have to proceed to the next step which is mentioned Further
STEP 3:Installation Of CM 9 ICS Firmware
1.First up you need to download Zip file which is mentioned below in your computer
https://hotfile.com/dl/151919225/1624f9b/cm_beni-beta4.zip.html
2.Now, once you are done with downloading the above file in your computer, you need to now copy the file in your phone and ensure that you are not placing these file deep into the phone. Please note that you should not modify or rename the files which you have downloaded or else there is a high probability that the file would not be supported.
3.After this Enter in Recovery Mode by Holding Power Off + Menu Button Until Recovery Mode Appears.
4.In the recovery mode, you will have to choose “choose zip from SD”. Now, from the list of files and paths you will need to first select the file which is named as “cm_beni-beta4.zip (or which You Have Copied to SD Earlier)”. Ensure that you select the file properly.
5.Now, as soon as the process is over.Select Wipe Data/Factory Reset And Wipe Cache Partition.After All Done Select “Reboot System Now”
So, there you go as soon as the phone is rebooted you will see that the firmware is updated with the latest version of Android 4.0(ICS 4.0.3)...
No Need To Say THANKS Just Press It..
Click to expand...
Click to collapse
From which planet are you?
ZmisiS said:
From which planet are you?
Click to expand...
Click to collapse
Didn't Get U..
ZmisiS said:
From which planet are you?
Click to expand...
Click to collapse
Gud ques brother .. Wen beta 7 s out y s he posting beta 4 .. Seems lyk he s a new bee and want to get 10 posts through anyway
Sent From Hell ... Wanna Come .. ??
mohitawasthi said:
Didn't Get U..
Click to expand...
Click to collapse
Lol .. Wen beta 7 s out y r u posting an update for beta 4 ?? Read da forum rules .. Dnt post spam .. !!
Sent From Hell ... Wanna Come .. ??
avilove4u said:
Gud ques brother .. Wen beta 7 s out y s he posting beta 4 .. Seems lyk he s a new bee and want to get 10 posts through anyway
Sent From Hell ... Wanna Come .. ??
Click to expand...
Click to collapse
Go to hell...Dont interfere in my post..those whose want beta 4 will get it frm heree...
avilove4u said:
Gud ques brother .. Wen beta 7 s out y s he posting beta 4 .. Seems lyk he s a new bee and want to get 10 posts through anyway
Sent From Hell ... Wanna Come .. ??
Click to expand...
Click to collapse
He already has 15 posts. He coping from other websites and pasting on this site.
ZmisiS said:
He already has 15 posts. He coping from other websites and pasting on this site.
Click to expand...
Click to collapse
Ohh u knw dat fact...lolzz
Give d souce where i copy paste it...
mohitawasthi said:
Go to hell...Dont interfere in my post..those whose want beta 4 will get it frm heree...
Click to expand...
Click to collapse
This Beta 4 already is on this site.
---------- Post added at 08:26 PM ---------- Previous post was at 08:25 PM ----------
mohitawasthi said:
Ohh u knw dat fact...lolzz
Give d souce where i copy paste it...
Click to expand...
Click to collapse
Ask Aspire.
mohitawasthi said:
Go to hell...Dont interfere in my post..those whose want beta 4 will get it frm heree...
Click to expand...
Click to collapse
No one wants beta 4 wen beta 7 s out .. !!
Sent From Hell ... Wanna Come .. ??
ZmisiS said:
He already has 15 posts. He coping from other websites and pasting on this site.
Click to expand...
Click to collapse
Ohh .. Then it seems dat he loves flickering n bugs.. As beta 4 has sooo many bugs !!!!
Sent From Hell ... Wanna Come .. ??
ZmisiS said:
This Beta 4 already is on this site.
---------- Post added at 08:26 PM ---------- Previous post was at 08:25 PM ----------
Ask Aspire.
Click to expand...
Click to collapse
Why dude why i ask to Aspire U say dat i copy paste it so u knw dat fact frm where i copy paste it so jst tel wats d problm....i repeat mind ur work dont interfere...
mohitawasthi said:
Why dude why i ask to Aspire U say dat i copy paste it so u knw dat fact frm where i copy paste it so jst tel wats d problm....i repeat mind ur work dont interfere...
Click to expand...
Click to collapse
Just you work. I have a right to express their opinion.
ZmisiS said:
Just you work. I have a right to express their opinion.
Click to expand...
Click to collapse
yea so only express ur opinion or give a suggestion...dont interfere...mind ur work nly..
mohitawasthi said:
yea so only express ur opinion or give a suggestion...dont interfere...mind ur work nly..
Click to expand...
Click to collapse
My opinion is that what you are doing on this website is wrong.
If you want to increase your internal memory and are willing to install custom rom this is for you...
Requirements:
*Rooted Phone
*Memory Card with ext4 partition (atleast 1gb not more than 2gb)
*CM10 ROM Beta 3 (link for download in this thread)
*Brain
Procedure:
First Root your phone.
http://forum.xda-developers.com/showthread.php?t=1415223
Make a Nandroid backup.
Install Custom ROM
Install Your Custom Rom
Note: This part of the guide can be repeated with as many different rom's as you like. You do not have to repeat the previous section once you have a recovery image installed.
1. Download a Custom ROM from here to your computer.
From here: http://www.mediafire.com/?w5hbhl9795syl0s
2. Make sure your phone is in recovery mode (Volume Down Key + Power and Select Recovery Press "Power Key")
Place the Custom ROM on your SD card in the main directory.
3. Select Backup/Restore > Nand backup > confirm with Power Key> Wait
4. After this Select :
Wipe data/factory reset > Power Key
Go to Advance
Wipe Dalvik-cache > Power Key
->Go back
Select Install Zip from SD Card
Select the file and Install
5. Once it is done, select Reboot and you will boot into the new Custom ROM.
And Voila ....
You have What you Needed...
Don't Forget To hit Thanks....
buddy there must be a script to link the internal and ext partition..(e.g mount2sd, int2ext, etc.)...and there are plenty of tutorials here..there is no need of this one...
p.s. there will be no errors while flashing the rom!!
what the hell is this.
Their are already many tutorials on this.....
Is this juz an attempt to get more thanx
Sent from my HTC Explorer A310e using xda premium
this thread should be named installing a custom ROM & u didn't mention any script to link the ext partition.
to boot into recovery mode- power+volume down
and there would be no errors when flashing a ROM.
After reading this thread I think you have never even used Cwm recovery forget flashing a rom on explorer -_-
Sent from my HTC Explorer A310e using xda app-developers app
how to get into recovery with Home+power since we don't have hard button for home? I thnk this tut (or part of it) is copied from another device .
rom in links is modified from original and it has an int2ext script in system/etc/init.d so give credit for the real tutorial
ytnvj2 said:
Install Custom ROM
Install Your Custom Rom
2. Make sure your phone is in recovery mode (Home + Power)
Plug your phone into your computer and select "USB-MS toggle" in recovery
Place the Custom ROM on your SD card in the main directory and press Home when it has finished copying over
3. Select Backup/Restore > Nand backup > confirm with Home > Wait
(or Nand + Ext if you have A2SD setup)
4. Press back then select Wipe from the main menu, then select:
Wipe data/factory reset > Home
Wipe cache > Home
Wipe Dalvik-cache > Home
Wipe SD:ext partition > Home
Press back button
Select Flash Zip from SD Card
Select the file
Press Home to confirm
Note: Ignore any "errors", they are normal and usually mean you're not using that feature
And Voila ....
You have What you Needed...
Click to expand...
Click to collapse
dafaq is this?? ever used recovery on explorer?
Sent from my HTC Explorer A310e using xda app-developers app
vshl2995 said:
buddy there must be a script to link the internal and ext partition..(e.g mount2sd, int2ext, etc.)...and there are plenty of tutorials here..there is no need of this one...
p.s. there will be no errors while flashing the rom!!
Click to expand...
Click to collapse
Yes there is a script and it doesn't matter how many posts there are ....
I couldn't find something like this so I posted this...
tofanpc said:
how to get into recovery with Home+power since we don't have hard button for home? I thnk this tut (or part of it) is copied from another device .
rom in links is modified from original and it has an int2ext script in system/etc/init.d so give credit for the real tutorial
Click to expand...
Click to collapse
My Bad ! dude , but I have corrected it...
And this tutorial is easy to follow....
deepsagarj said:
dafaq is this?? ever used recovery on explorer?
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Please dont quote the main topic
z.ascetic said:
what the hell is this.
Click to expand...
Click to collapse
Easiest Tutorial to Install Custom Rom which would increase Your phone's Internal Memory...
rockingmanish said:
Their are already many tutorials on this.....
Is this juz an attempt to get more thanx
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
I posted this cause couldn't find one like this when i needed it...
Closed. Easily one of the most unneccessary threads ever.
Additionally the title suggests something totally different.
Videocon A45 - Android Phone Status Bar missing and Phone keeps Restarting itself.
My Videocon A45 Android v2.3.5 Phone keeps restarting on itself....
Also, when it starts "sometimes", it shows (com.systemui process error) and asks to force close ..... i see that the status/ notification bar on top which displays your battery, connections, usb connections n all, is missing.
I have Rooted my device.
This problem started soon as i was using root uninstal software and i was backing up some apps and uninstalling them to free up some internal storage...
but i guess i have uninstalled some, which i shouldnt have...
Please tell me if you need some more information to solve this problem....
Please please help me out with this Thank You...
AndroidifiedPratik said:
Videocon A45 - Android Phone Status Bar missing and Phone keeps Restarting itself.
My Videocon A45 Android v2.3.5 Phone keeps restarting on itself....
Also, when it starts "sometimes", it shows (com.systemui process error) and asks to force close ..... i see that the status/ notification bar on top which displays your battery, connections, usb connections n all, is missing.
I have Rooted my device.
This problem started soon as i was using root uninstal software and i was backing up some apps and uninstalling them to free up some internal storage...
but i guess i have uninstalled some, which i shouldnt have...
Please tell me if you need some more information to solve this problem....
Please please help me out with this Thank You...
Click to expand...
Click to collapse
I think you uninstalled some system apps. May be the systemUI.apk , it is the one which is responsible for the status bar.
Hit thanks rather than typing it now Free
parkourkarthik said:
I think you uninstalled some system apps. May be the systemUI.apk , it is the one which is responsible for the status bar.
Hit thanks rather than typing it
Click to expand...
Click to collapse
what can I do to fix this....Please tell me.... Thank you for replying...!
AndroidifiedPratik said:
what can I do to fix this....Please tell me.... Thank you for replying...!
Click to expand...
Click to collapse
You should have had a backup of your systemUI else at least a nandroid backup.
It seems you don't have a Custom recovery like cwm.
Also you don't have the systemUI backup i think.
Other choices as you don't have backups-
Search for your device's CWM try to flash it & then find a custom Rom for your device and flash it.
Another way is that ask some of the members with the same device as yours for the systemUI.apk and push it into the /system/app either with the help of adb or CWM through aroma filemanager.:thumbup:
Please do a little search on what i am suggesting and try to learn & do as i can't post all the methods step by step in a single post.
Hit thanks rather than typing it now Free
parkourkarthik said:
You should have had a backup of your systemUI else at least a nandroid backup.
It seems you don't have a Custom recovery like cwm.
Also you don't have the systemUI backup i think.
Other choices as you don't have backups-
Search for your device's CWM try to flash it & then find a custom Rom for your device and flash it.
Another way is that ask some of the members with the same device as yours for the systemUI.apk and push it into the /system/app either with the help of adb or CWM through aroma filemanager.:thumbup:
Please do a little search on what i am suggesting and try to learn & do as i can't post all the methods step by step in a single post.
Hit thanks rather than typing it
Click to expand...
Click to collapse
1. Karthik, as i mentioned in the first post, that my phone starts sometimes, it did now , and i checked for the SystemUI.apk (Status Bar) ,
2. i find that it has not been uninstalled,
3. it is there, also i have backed it up using Root Uninstaller software to my SD card....!
4. It shows on my SD Card..
5. Also please let me know, whether factory reset can solve this (i dont mind losing the data, its jus been 2 weeks i have bought it )
6. Also, please tell me, does unrooting my phone help to fix this...??
7. I have not used ClockworkMod in any ways...
8. Please please help me sir.... my first android phone and has just been less than 2 weeks i bought it... Please help me Sir...! Thank you....
AndroidifiedPratik said:
1. Karthik, as i mentioned in the first post, that my phone starts sometimes, it did now , and i checked for the SystemUI.apk (Status Bar) ,
2. i find that it has not been uninstalled,
3. it is there, also i have backed it up using Root Uninstaller software to my SD card....!
4. It shows on my SD Card..
5. Also please let me know, whether factory reset can solve this (i dont mind losing the data, its jus been 2 weeks i have bought it )
6. Also, please tell me, does unrooting my phone help to fix this...??
7. I have not used ClockworkMod in any ways...
8. Please please help me sir.... my first android phone and has just been less than 2 weeks i bought it... Please help me Sir...! Thank you....
Click to expand...
Click to collapse
Any methods that i know couldn't help you AFAIK.
Coz there are ways complex for you to get into right now. (such as taking logcat through adb, finding & debugging the problem)
Better try to give it in service center, and don't say that you rooted the device.
They can easily flash a fresh firmware for your device.
All the best:thumbup:
Hit thanks rather than typing it now Free
parkourkarthik said:
Any methods that i know couldn't help you AFAIK.
Coz there are ways complex for you to get into right now. (such as taking logcat through adb, finding & debugging the problem)
Better try to give it in service center, and don't say that you rooted the device.
They can easily flash a fresh firmware for your device.
All the best:thumbup:
Hit thanks rather than typing it
Click to expand...
Click to collapse
1. The service center people will directly know that the device is rooted, coz as i said my device starts up and functions normally for sometime, and i can see root apps on the menu, superSU, RootUninstaller , Titanium Backup and all... and I would like to keep it as last option to go to service center, they would take too long to solve this...
2. Do you suggest Uninstalling these root apps first....?
3. Do you suggest Unrooting my device before i take it to the service center...? coz i had read that they wont know that it was rooted then..
4. How do you take logcat through android debugging , find & debug the problem-- What do i require to do this, i mean the required softwares n all....
5. i also have the com.android.acore unexpectedly closed error... i cannot access call functions as well....
6. What are the probable causes for this problem........ ? Thank you..!
AndroidifiedPratik said:
1. The service center people will directly know that the device is rooted, coz as i said my device starts up and functions normally for sometime, and i can see root apps on the menu, superSU, RootUninstaller , Titanium Backup and all... and I would like to keep it as last option to go to service center, they would take too long to solve this...
2. Do you suggest Uninstalling these root apps first....?
3. Do you suggest Unrooting my device before i take it to the service center...? coz i had read that they wont know that it was rooted then..
4. How do you take logcat through android debugging , find & debug the problem-- What do i require to do this, i mean the required softwares n all....
5. i also have the com.android.acore unexpectedly closed error... i cannot access call functions as well....
6. What are the probable causes for this problem........ ? Thank you..!
Click to expand...
Click to collapse
2. Yes
3. Yes
4. Your device's usb drivers, adt or just the platform tool folder & Time to research.
6. I can't say for sure
Hit thanks rather than typing it now Free
parkourkarthik said:
2. Yes
3. Yes
4. Your device's usb drivers, adt or just the platform tool folder & Time to research.
6. I can't say for sure
Hit thanks rather than typing it
Click to expand...
Click to collapse
1. Please provide download links for Android Developement Tool, is it universal for all devices or like clockworkmod coz i coudnt find CWM for my device.
2. What do you mean by, "just the platform tool folder", what is it??
3. Actually, i want to try fix this myself, i am ready to spend time on this, and not willing to go to service center as i said above, they take like for ever...
4. Thank you...!
AndroidifiedPratik said:
1. Please provide download links for Android Developement Tool, is it universal for all devices or like clockworkmod coz i coudnt find CWM for my device.
2. What do you mean by, "just the platform tool folder", what is it??
3. Actually, i want to try fix this myself, i am ready to spend time on this, and not willing to go to service center as i said above, they take like for ever...
4. Thank you...!
Click to expand...
Click to collapse
Try a data/cache wipe first & check whether it gets solved..
1. Google it as 'download adt'.
2. It can be said as adb environment. It's a part of adt.
Hit thanks rather than typing it now Free
parkourkarthik said:
Try a data/cache wipe first & check whether it gets solved..
1. Google it as 'download adt'.
2. It can be said as adb environment. It's a part of adt.
Hit thanks rather than typing it
Click to expand...
Click to collapse
1. I did wipe cache partition and also I did wipe data/factory reset...
2. And now my phone is stuck on "Welcome to videocon A45 - Touch the Android to begin" Screen...
3. When I do touch the Android Logo it just glows and nothing happens... the animation of a hand demonstrating the touching goes on and on..
4. I dont know what to do ...Please help..!
5. Can I Unroot the device now...?
6. I did download the ADT Bundle... 480Mb size... I will install it ... How do I use it..??
Thank you.
AndroidifiedPratik said:
1. I did wipe cache partition and also I did wipe data/factory reset...
2. And now my phone is stuck on "Welcome to videocon A45 - Touch the Android to begin" Screen...
3. When I do touch the Android Logo it just glows and nothing happens... the animation of a hand demonstrating the touching goes on and on..
4. I dont know what to do ...Please help..!
5. Can I Unroot the device now...?
6. I did download the ADT Bundle... 480Mb size... I will install it ... How do I use it..??
Thank you.
Click to expand...
Click to collapse
please reply karthik....!
hey i gave it to the service center,... they fixed right away thanks....!:good:
Hey guys.
My final goal is to get Cyanogenmod11 on my Atrix 2.
I know there are 3 stages to do this.
Atrix 2 Specs:
Official ICS 4.0.4
Unrooted
What I am planning to do:
1. ROOT using http://forum.xda-developers.com/showthread.php?t=1742879
2. Clockwordmod Recovery using http://theunlockr.com/2012/11/14/how-to-install-clockworkmod-recovery-on-the-motorola-atrix-2/ (Atrix2Bootstrap.apk), because Boot Menu Manager is so confusing, and I'm not used to partitions.
3. Flash a CM11 ROM with proper gapps (need help).
Where I need help:
1. I want to know if the rooting method and the CWM method will work.
2. I can't find any proper CM11 ROM+GApps where people have commented "success!"
3. All the tutorials I find just say use BMM. I want to use CWM, how do I go about flashing a ROM with CWM (Bootstrap) on Atrix 2? Can I get some steps for this?
4. My motorola drivers are from https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481 , if that's right.
I'm requesting the amazing xda-devs team for help.. thanks in advance.
Same confusion for me :/ which method to follow :/
1. You posted this on the wrong section.
2. Rooting method will work. But will not. Why? You'll find out momentarily.
3. I think in every thread, including cm has gapps' link. Any gapps will do fine. Unless that is specified by the dev.
3. Here's the answer. All roms here only use BMM to flash. No other. There's a reason why the tutorials say BMM. Fyi, BMM is cwm based.
4. Head over to general section. There you will find a tutorial how to set BMM up.
5. If this is so hard for you, the most preliminary step is a must for you. Snoop around and read.
Sent from my MB865 using XDA Premium 4 mobile app
---------- Post added at 06:53 PM ---------- Previous post was at 06:53 PM ----------
noranora said:
1. You posted this on the wrong section.
2. Rooting method will work. But CWM will not. Why? You'll find out momentarily.
3. I think in every thread, including cm has gapps' link. Any gapps will do fine. Unless that is specified by the dev.
3. Here's the answer. All roms here only use BMM to flash. No other. There's a reason why the tutorials say BMM. Fyi, BMM is cwm based.
4. Head over to general section. There you will find a tutorial how to set BMM up.
5. If this is so hard for you, the most preliminary step is a must for you. Snoop around and read.
Sent from my MB865 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sent from my MB865 using XDA Premium 4 mobile app
BMM is not that hard to use as it look !! :angel:
Even I also got confused for very first time after watching the video, but dont worry you can do it it not that difficult
Just root your phone by any method then
install BMM from play store -->> open it -->> give root access to it -->> let it do its work -->> i dont remember but may be it will restart phone, if not then restart your phone (after its work is finished) -->> on restart -->> you will see motorola logo and after that android logo (green) -->> click on it -->> then follow the BMM vdo tutorial
(I am kinda lazy about writing all steps )
PM me or any member we will help you if you stuck anywhere..... but you have to watch the complete vdo and try to understand it first
noranora said:
1. You posted this on the wrong section.
2. Rooting method will work. But will not. Why? You'll find out momentarily.
3. I think in every thread, including cm has gapps' link. Any gapps will do fine. Unless that is specified by the dev.
3. Here's the answer. All roms here only use BMM to flash. No other. There's a reason why the tutorials say BMM. Fyi, BMM is cwm based.
4. Head over to general section. There you will find a tutorial how to set BMM up.
5. If this is so hard for you, the most preliminary step is a must for you. Snoop around and read.
Sent from my MB865 using XDA Premium 4 mobile app
---------- Post added at 06:53 PM ---------- Previous post was at 06:53 PM ----------
Sent from my MB865 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah, kinda sorry about the wrong section thing, I guess I should've posted it in the help section. Btw what do you mean when you say the rooting method will not work? And what I mean by the cm11 threads is that they provide non working gapps where many users have complained of an error "installation aborted".. Thanks though.
Sent from my Amazon Kindle Fire HD running CyanogenMod 11
sameerm02 said:
BMM is not that hard to use as it look !! :angel:
Even I also got confused for very first time after watching the video, but dont worry you can do it it not that difficult
Just root your phone by any method then
install BMM from play store -->> open it -->> give root access to it -->> let it do its work -->> i dont remember but may be it will restart phone, if not then restart your phone (after its work is finished) -->> on restart -->> you will see motorola logo and after that android logo (green) -->> click on it -->> then follow the BMM vdo tutorial
(I am kinda lazy about writing all steps )
PM me or any member we will help you if you stuck anywhere..... but you have to watch the complete vdo and try to understand it first
Click to expand...
Click to collapse
Thanks a lot man, I appreciate this. But my main worry was the partitions. Its extremely complicating, and I thought clockwork mod recovery aka bootstrap was a better and easier option.
Sent from my Amazon Kindle Fire HD running CyanogenMod 11
Opps. My bad. The rooting method will work. But CWM will not. Because if you want to flash kk rom, you'll need BMM. I'm pretty sure altered stated that, any gapps will do fine. But preferably pa gapps. But if you want it running on main system, you need other gapps. As pa minimal gapps too big for our data partition. So there it is. Fail to install. As for allocating partition for other system, it's pretty simple and easy actually. I'll leave sameer or other member to answer.
Sent from my MB865 using XDA Premium 4 mobile app
noranora said:
Opps. My bad. The rooting method will work. But CWM will not. Because if you want to flash kk rom, you'll need BMM. I'm pretty sure altered stated that, any gapps will do fine. But preferably pa gapps. But if you want it running on main system, you need other gapps. As pa minimal gapps too big for our data partition. So there it is. Fail to install. As for allocating partition for other system, it's pretty simple and easy actually. I'll leave sameer or other member to answer.
Sent from my MB865 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This is really complicated now.. I had installed CyanogenMod on a Motorola defy and my kindle fire, and there were no partitions and stuff. I don't care much for dual boot and partitions.. Not like I like Motorola's OS anyway. Thanks though.
Sent from my Amazon Kindle Fire HD running CyanogenMod 11
I can rephrase my queries.
What I'm having issues with is:
I don't want to have multi boot or partitions, installing CM11 as the default boot is preferable.
It would be cool if I could get quick help on installing BMM, it's very confusing.
Also, flashing the ROM with BMM is also very confusing.
Thanks in advance.
EDIT: Rooted phone.
androidnewbie123 said:
I can rephrase my queries.
What I'm having issues with is:
I don't want to have multi boot or partitions, installing CM11 as the default boot is preferable.
It would be cool if I could get quick help on installing BMM, it's very confusing.
Also, flashing the ROM with BMM is also very confusing.
Thanks in advance.
EDIT: Rooted phone.
Click to expand...
Click to collapse
See this video tutorial for BMM
http://forum.xda-developers.com/showthread.php?t=2602229&page=1
androidnewbie123 said:
[*]I don't want to have multi boot or partitions, installing CM11 as the default boot is preferable.
Click to expand...
Click to collapse
If you don't want multiple partitions the don't set any up. Just skip that part. I never use more than one ROM either.
androidnewbie123 said:
[*]It would be cool if I could get quick help on installing BMM, it's very confusing.
Click to expand...
Click to collapse
Download the app, open it, select "install". Done.
androidnewbie123 said:
[*]Also, flashing the ROM with BMM is also very confusing.
Click to expand...
Click to collapse
Reboot the phone. After the Motorola logo you'll see an green android with spinning gears. Within 3 seconds tap on the android. Then select "recovery". Go to "wipe and clean" and do a factory reset. Go back and select "install zip package", then "install zip from storage". Choose the file from your SD card using the volume keys to navigate and power to select. Install gapps the same way then reboot. Done.
androidnewbie123 said:
I can rephrase my queries.
What I'm having issues with is:
I don't want to have multi boot or partitions, installing CM11 as the default boot is preferable.
It would be cool if I could get quick help on installing BMM, it's very confusing.
Also, flashing the ROM with BMM is also very confusing.
Thanks in advance.
EDIT: Rooted phone.
Click to expand...
Click to collapse
Ok...i will try to keep it as simple as i can
1) It would be cool if I could get quick help on installing BMM, it's very confusing.
Ans :
Please , i say please if u want to go somewhere with your A2 , u hav to start loving BMM and love it truely madly deeply because without it A2 wouldnt get any of the goodies it has.The video is confusing i agree..i didnt do it when the video was out...Its fairly simple you know...here i list the easy steps..follow them 1 by 1 and do it simultaneously with your device....it wont be difficult...
You can find the complete instructions in the quote below :
>Download and install BMM from google play https://play.google.com/store/apps/d...otmenu.manager
>Our phone does not have a partition for internal storage.. so we use the data partition for it.. To do so, just open a root browser like root explorer and navigate to /etc/bmm/conf
>Open "recovery.fstab" with a text editor
The last line will be something like this
/int vfat /dev/block/mmcblk1p25
Just change 'vfat' to 'auto' and 'mmcblk1p25' to 'userdata' (its the same though..)
So that it looks like this
/int auto /dev/block/userdata
and of course save it and close it..
Done.. you are good to go.. Happy Multi Booting..
Just some tips
On your first reboot, tap the android, go to settings-->System_2-->Partition setup and tap on ACTIVATE. This formats cdrom partition to ext2.
Now go back 2 two steps, and select any other system(3-6). choose Partition setup, tap on system.img, tap on Create, select the size, create it. go back and do the same with data.img and cache.img.
Once thats done, go back and select recovery, select switch system. choose your system that you created the images for, the colour will change, install any custom rom.. Enjoy!!
NOTE: BMM stores the images in internal memory(/int/clockworkmod/virtual/system_(num)). Since we dont have emmc partition and are using the data partition for /int, doing a factory reset will wipe it out and you will lose all your other roms.. So be carefull..
NOTE 2: USE ONLY SYSTEMS 3 TO 6 FOR CUSTOM ROMS.. SUSTEM 2 IS CDROM PARTITION.. YOU ACTIVATE IT ONCE AND DONE.. DONT TOUCH IT AGAIN.. ITS ONLY 12MB..
IMPORTANT NOTE: DO NOT INSTALL BMM IF YOU USED A2 BOOTSTRAPPER BEFORE. THAT WILL MESS THINGS UP WITH YOUR LOGWRAPPER.BIN. THERE IS A GOOD CHANCE YOU WILL BOOT LOOP AFTER REBOOT. NOW IF FOR SOME REASON YOU DID NOT READ THIS, AND GET A MESSAGE ABOUT BMM ASKING YOU TO GET HELP, BEST THING FOR YOU TO DO IS RECHARGE YOUR BATTERY FULLY AND FXZ BACK. OR THERE IS A GOOD CHANCE YOU WILL HAVE TO USE MCGRUVYER METHOD OR ANOTHER A2 BATTERY. USER RAD7 RECENTLY HAD QUITE A LOT OF TROUBLE WITH HIS BATTERY DYING AFTER BMM MESSED WITH LOGWRAPPER. YOU HAVE BEEN INFORMED.
2) I don't want to have multi boot or partitions, installing CM11 as the default boot is preferable.
Ans :You dont need to multi boot mandatorily.You can flash any ROM of your choice on system 1. That will be the only single ROM you have on your device...
Again..really sorry..BMM is the way...You hav to learn to love it....and it will love your phone back
3) Also, flashing the ROM with BMM is also very confusing.
Ans : After you install and go through the UI once. I bet it will be the simplest thing you ever used..Even more simple than the FB app u regularly use :silly::silly:
Thanks to both of you guys
Installed BMM, but need to flash ROM on system 1. Don't really care about multi boot.. how do I just do that with BMM?
androidnewbie123 said:
thanks to both of you guys :d
installed bmm, but need to flash rom on system 1. Don't really care about multi boot.. How do i just do that with bmm?
Click to expand...
Click to collapse
↓↓↓↓
1badwolf said:
reboot the phone. After the motorola logo you'll see an green android with spinning gears. Within 3 seconds tap on the android. Then select "recovery". Go to "wipe and clean" and do a factory reset. Go back and select "install zip package", then "install zip from storage". Choose the file from your sd card using the volume keys to navigate and power to select. Install gapps the same way then reboot. Done.
Click to expand...
Click to collapse
androidnewbie123 said:
Thanks to both of you guys
Installed BMM, but need to flash ROM on system 1. Don't really care about multi boot.. how do I just do that with BMM?
Click to expand...
Click to collapse
Also remember ..as you are going to install on system 1...only BANKS MINIMAL GAPPS will work...Link to BANKS Minimal is there in the CM11 thread by ALtered
Happy flashing
Thank you all people, I managed to do it.
Sent from my Amazon Kindle Fire HD running CyanogenMod 11