Hey folks
I have an xperia neo v rooted and unlocked bootloader
I reacently changed my rom feom pureness 10.1 to aokp build 3
During this my data n caches wer wipedaway
And soon wen i rebooted it it was stuck in a bootloop
As d system setting was also reset i m not able to check usbdebugging
So m not able to flash or install cwm
Pls some1 pls help
I m waiting for a reply.
Thank you
Pls help
Pls
Sent from my GT-S5360 using xda app-developers app
Have you tried to reflash the original firmware via Flashtool?
Sent from my shooteru using xda premium
neerajrk37 said:
Hey folks
I have an xperia neo v rooted and unlocked bootloader
I reacently changed my rom feom pureness 10.1 to aokp build 3
During this my data n caches wer wipedaway
And soon wen i rebooted it it was stuck in a bootloop
As d system setting was also reset i m not able to check usbdebugging
So m not able to flash or install cwm
Pls some1 pls help
I m waiting for a reply.
Thank you
Pls help
Pls
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
First get the Flashtool Here : http://androxyde.github.com/
Then Get the FTF package here : http://depositfiles.com/files/zlh1aa1eg
Install the Flashtool. Then go to the directory where you installed the Flashtool find Drivers folder & install the drivers. (C: > Program Files > Flashtool > Drivers)
Then extract the FTF file from .zip file using winrar. Put the extracted .FTF file in Firmwares folder. (C: > Program Files > Flashtool > Firmwares)
Open Flashtool. Click flash icon select flashmode. Select firmware : .587 ICS. Then follow the instructions on the screen. As simple as that.
P.S. After the flashing process is completed, the phone DOESN'T START ON ITS OWN. Disconnect the cable and YOU start the phone regularly. It takes time to start the phone so be patient. And don't panic. Its gonna be okay.
Dont forget to hit Thanks Button!!
I did it wid another method
I found dat it was my mistake
D kernel was not flashed for aokp build 3
It needs a job kernel and I just extracted d rom
From deer flashed it in fastboot mode and den all was done. .....
thanks for our advice
I really appreciate it:thumbup:
Sent from my Xperia Neo V using xda app-developers app
kadukarashutosh7 said:
First get the Flashtool Here : http://androxyde.github.com/
Then Get the FTF package here : http://depositfiles.com/files/zlh1aa1eg
Install the Flashtool. Then go to the directory where you installed the Flashtool find Drivers folder & install the drivers. (C: > Program Files > Flashtool > Drivers)
Then extract the FTF file from .zip file using winrar. Put the extracted .FTF file in Firmwares folder. (C: > Program Files > Flashtool > Firmwares)
Open Flashtool. Click flash icon select flashmode. Select firmware : .587 ICS. Then follow the instructions on the screen. As simple as that.
P.S. After the flashing process is completed, the phone DOESN'T START ON ITS OWN. Disconnect the cable and YOU start the phone regularly. It takes time to start the phone so be patient. And don't panic. Its gonna be okay.
Dont forget to hit Thanks Button!!
Click to expand...
Click to collapse
I am having same problem but after i install driver for xperia neo (in flashtool der is no option for neo v) and i also tick on flasshmode and fastboot drivers..still when i connect phone, it says no drivers found...i am on xp sp2 and stock ics which keeps on rebooting HELP!
[SOLVED]
droid_cyborg said:
I am having same problem but after i install driver for xperia neo (in flashtool der is no option for neo v) and i also tick on flasshmode and fastboot drivers..still when i connect phone, it says no drivers found...i am on xp sp2 and stock ics which keeps on rebooting HELP!
[SOLVED]
Click to expand...
Click to collapse
Maybe you should download sony PC companion from here http://www.devfiles.co/download/9UANJ1k9/Sony_PC_Companion_Web.exe . I will try this option now. My Neo V MT11i is stuck in bootloop now.. I also tried to run flashtool drivers .exe for Neo, fastboot and flashmode, but still did not work. Flashtool still says I need drivers. Hoping for the best. God bless.
Update: thanks to @neerajrk37 for giving the instructions about flashing the right kernel. Now I have escaped bootloop without using PC companion.
---------- Post added at 09:58 PM ---------- Previous post was at 09:41 PM ----------
Related
Root and CWM for Xperia J Finally!
Thanks to srl3gx and Bin4ry for their awsome work!
and ME for taking risk!
Make sure u are in 11.0.A.3.28 or 11.0.A.3.18 firmware ALONE with Locked Bootloader..
This method Dosent Work on 11.0.A.7.5 Firmware! (working on it! )
for .28 firmware download from here and flash it
if u dont have a flash tool download it from here for windows and install drivers located in C:\Flashtool\drivers (choose all drivers)
since flash tool does not have xperia j drivers..u may hav flashing problem...for that
1.download and extract d ST26.zip ive uploaded
2.open flash tool
3.click devices>import
4.navigate to d file u've extracted
5.now xperia j driver is installed
u can now flash without problems
Now back to rooting...
Root first! thn apply CWM!
Steps for Rooting:
1.extract Root_J.zip
2.make sure 'usb debugging' is enabled in devolpment settings
3.double click Runme.bat file for windows users...runme.sh for linux users
4.wait for process to finish (mostly should work)
Steps for CWM:
1.extract CWM_J.zip
2.'usb debugging' on
3.double click 'install.bat' only for windows (linux not working! my bad..)
4.wait for it.....installed! close the shell program and switch off the phone..
Plug in charger or USB....the phone switches on....press up and down volume keys repeatedly when SONY logo flashes.....voila u get into CWM!
You need plugged in charger or USB to goto CWM! Else CWM wont Work!!
reboot to system and see if supersu is installed finish! ur phone is rooted and cwm is installed !!
CWM has little bugs ..but its a never mind stuff..
use arrow keys to navigate..power button to select and 'go back' option in cwm itself to go to previous options.
Comment if it worked for you...let others know!
Tested on my xperia J and Miro
Dont restore factory setting or else CWM will vanish...n u hav to reflash whole firmware again
for questions and problems ask srl3gx
HOPE I HELPED...hit thanks
Sorry for the last update! It Dindn't Work for many devices!
wow finally it arrived.
Anyone tried this already?
Sent from my ST26i
Yes dude I tested it.. It works... That's y i posted it
Sent from my ST26i using xda premium
kishenpj21 said:
Yes dude I tested it.. It works... That's y i posted it
Sent from my ST26i using xda premium
Click to expand...
Click to collapse
Followed your instructions on my Experia J. I have build 11.0.A.3.18 (UK on orange/EE). I decided against flashing to 3.28 and to try with 3.18, but to get the Flashtool working I did the following:
Once the ST26.zip file is extracted (using Winrar) I then have to open this extracted file again in WinRar to get the files that should live at C:\Flashtool\devices\ST26 (loader.sin etc.). I then had to copy the original file ST26.ftd to c:\Flashtool\devices. I enabled USB debugging in the Developer settings on the phone and Flashtool started working properly.
I was able to root and CWM the device as per your instructions on buiild 11.0.A.3.18. Cheers.
The major problem with this CWM method is that it's designed for the Tipo, so when you try to flash a zip made for jlo, it fails. I had to remove the assert from the top of the scrip to flash with this.
Thanks for trying on .18 firmware... I'll update d thread
Sent from my ST26i using xda premium
adfad666 said:
The major problem with this CWM method is that it's designed for the Tipo, so when you try to flash a zip made for jlo, it fails. I had to remove the assert from the top of the scrip to flash with this.
Click to expand...
Click to collapse
Dude dunno y u have problems with CWM...btr to flash according to my instructions... It works for many
Sent from my ST26i using xda premium
kishenpj21 said:
Dude dunno y u have problems with CWM...btr to flash according to my instructions... It works for many
Sent from my ST26i using xda premium
Click to expand...
Click to collapse
Have you tried flashing a compiled ROM? It fails as the CWM thinks it's on a Tipo device.
Plus if you wipe your system partition, you lose CWM, it's not a good solution. I've posted a CWM as a boot.img in my CM10 thread
adfad666 said:
Have you tried flashing a compiled ROM? It fails as the CWM thinks it's on a Tipo device.
Plus if you wipe your system partition, you lose CWM, it's not a good solution. I've posted a CWM as a boot.img in my CM10 thread
Click to expand...
Click to collapse
Oh..ok.. But this post is for original firmware rooting n CWM... Won't work for custom roms
Sent from my ST26i using xda premium
kishenpj21 said:
Oh..ok.. But this post is for original firmware rooting n CWM... Won't work for custom roms
Sent from my ST26i using xda premium
Click to expand...
Click to collapse
OK, plus this will work for people who cannot unlock their bootloader. But perhaps you should put a warning as some people may want to wipe their system partition before they restore a backup (which will work) but if they for what ever reason try to reboot the phone they will be lost and will have to restore via flashtool!
thanks for report...updatd
very good work thx!
It's recovery from Tipo thus works like work: (
Pacjonek said:
It's recovery from Tipo thus works like work: (
Click to expand...
Click to collapse
sorry! cant get u!
Is this works with unlocked bootloaders '?
Sent from my ST26i using xda app-developers app
rachit7 said:
Is this works with unlocked bootloaders '?
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
Ya wil wrk but y do u want to unlock boot loader... Ready to lose warranty???
Sent from my ST26i using xda premium
I've updated my xperia j to firmware 11.0.A.7.5 and now i can't root it with this method...
Any help?
Yea im the same 11.0.A.7.5 cant you flash the phone with older firmware?
Okay i flashed that firmware from first page and now my phone is rooted thanks alot
If we can get ftf file of 11.0.A.7.5 firmware and flash it with Flashtool without wiping data (just wiping cache) maybe we don't loose root... but where can we found that ftf file???
I Was trying to install chainfire 3D it's restarting my mobile
and didn't open again
i tried to flash a rom by flash tool but i can't
A7medLSayed said:
I Was trying to install chainfire 3D it's restarting my mobile
and didn't open again
i tried to flash a rom by flash tool but i can't
Click to expand...
Click to collapse
why cant u flash with flashtool?
if your bootloader is still locked try to restore with pc companion or seus
Please explain a little more about your device status and the current issue bro,
Hit the thanks button instead of telling it....
thank you
sent from my Xperia E dual C1604..
A7medLSayed said:
I Was trying to install chainfire 3D it's restarting my mobile
and didn't open again
i tried to flash a rom by flash tool but i can't
Click to expand...
Click to collapse
You mean after reboot, you can see sony screen and got black screen after. If using flashtool, get any .ftf that you like, install the drivers first, then flash it. Remember, only connect the phone when flashtool ask you to. If youre still on locked bootloader, pc companion - repair would be easier.
Sent from [MY-PRK-MJG] Awesome Paradox Tipo ST21i
i want my xperia j to downgrade to 11.0.A.3.18 or 11.0.A.3.16 cuz my firmware is 11.0.A.7.5 and I'm facing problem with home screen "it's so slow not that smooth enough " i heard that the problem might be from the firmware version so if it's not so please another solution ... and i want a safe way of working ... also i want a way for backup my entire my current firmware so i can go back to it when any problem has happened
thnx a ton already :angel:
1.search and download ur desired firmware .ftf file.
2. root ur fone.
3.install cwm recovery
4.enter recovery and make backup.
5.flash the .ftf u downloaded earlier via flashtool.
these are the basic steps! if you dont get any step, use the "search" feature!
All the Best!!
Why dont u upgrade to JB
Sent from my ST26a using xda premium
haizanlhkt said:
Why dont u upgrade to JB
Sent from my ST26a using xda premium
Click to expand...
Click to collapse
i'm a fried that it will become more slowly and too heavy ... what do u think ??
c4cyro said:
1.search and download ur desired firmware .ftf file.
2. root ur fone.
3.install cwm recovery
4.enter recovery and make backup.
5.flash the .ftf u downloaded earlier via flashtool.
these are the basic steps! if you dont get any step, use the "search" feature!
All the Best!!
Click to expand...
Click to collapse
i can't find xperia j ClockworkMod Recovery for 11.0.A.7.5 :S
Ph.Sh said:
i can't find xperia j ClockworkMod Recovery for 11.0.A.7.5 :S
Click to expand...
Click to collapse
Just flash boot.img that came with a ROM zip.
Extract it and take boot.img to firmware file. (use Flashtool for Xperia)
Make sure you use fastboot to flash the kernel.
Hey guyz...
I m a noob to android...so i wanted to ask a small question...
My xperia miro is entirely new
Somehow i managed to root it
But my question is.. I want to flash glimo rom on my miro... So where to start?
I m soo damn confused!
Thx if i can get any help...
1. Install cwm recovery.
2. Download gimlo stock and gimlo rom zip files from the gimlo thread.
3. Boot to cwm-- turn off ur phone. Press power button. Repeatedly press vol - when u see sony logo. You're in cwm now.
3. Flash the zips according to as told in the gimlo installing thread.
Sent from my ST23i
Anybody has xperia miro drivers package... I want to unlock bootloader via fastboot but can't find the drivers..
Libinbabu53 said:
Anybody has xperia miro drivers package... I want to unlock bootloader via fastboot but can't find the drivers..
Click to expand...
Click to collapse
Download androxyde flashtool
Install it
Go to install location
Open drivers folder install fastboot and flashmode drivers ONLY. That should fix your problem
But if u have the unlock key from Sony
U can directly use the BL option in androxyde flashtool to unlock your bootloader( it worked for my E dual without bootloops.Sony's method caused bootloop) check my thread for more info
http://forum.xda-developers.com/showthread.php?t=2352081
Sent from my C1604 using xda app-developers app
Please help me... After unlocking the bootloader my phone is not booting it stuck on splash animation only.... Before unlocking the bootloader I HV rooted it was alright after unlocking this problem started... I HV used flash tool software to unlock it showed me normally and successfully... after that wen I reboot my phone it got stuck in splash animation.. wen I connect to charger it is operating normally showing all indication... please help me wht I must do next....
Use flashtool and ftf installing 4.2.2 build. 17
dante2p said:
Use flashtool and ftf installing 4.2.2 build. 17
Click to expand...
Click to collapse
can u please tell me how to install ftf by using flashtool...
Abidhteenu said:
can u please tell me how to install ftf by using flashtool...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=42929911
thanks for ur support were do I get this file for me C2104 15.3.A.1.17 ... otherwise can u pls give me link for this file....
Abidhteenu said:
thanks for ur support were do I get this file for me C2104 15.3.A.1.17 ... otherwise can u pls give me link for this file....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=48266204
after downloading the ftf file for c2104 release 15.3.A.1.17 did all step by step but still no use its in the same condition... pls help me what to do next...
First boot takes time
Let it boot
And flash the correct ftf as per your region..
Sent from my C2104 using XDA Free mobile app