Related
I unlocked the bootloader. Roms like Synergy, Bean, etc no longer boot (stuck on samusg scrreeen)
Any idea?\
confusedman112 said:
I unlocked the bootloader. Roms like Synergy, Bean, etc no longer boot (stuck on samusg scrreeen)
Any idea?\
Click to expand...
Click to collapse
What methode did you use to unlock it? I'm running the stock no nonsense rom and I belive unlocked with no problems
Do other roms boot? Will the newest CM10 nightly boot? Will anything boot?
Did you flash a different recovery? If you were using kexec roms before (beans is one, so is synergy with imo's kernel) and then flashed a non-kexec-supporting recovery, that'd explain not being able to boot. If you're unlocked, you don't have to flash a new recovery.
If you did the unlock correctly, you should be able to boot whatever you were able to before. If you can't get anything at all to boot, it's possible you flashed a bad aboot image.
lazarus2405 said:
Do other roms boot? Will the newest CM10 nightly boot? Will anything boot?
Did you flash a different recovery? If you were using kexec roms before (beans is one, so is synergy with imo's kernel) and then flashed a non-kexec-supporting recovery, that'd explain not being able to boot. If you're unlocked, you don't have to flash a new recovery.
If you did the unlock correctly, you should be able to boot whatever you were able to before. If you can't get anything at all to boot, it's possible you flashed a bad aboot image.
Click to expand...
Click to collapse
CM10 ROMs boot.
I think it's because I used CWM 5.x rather than 6.x. Phone isn't recongized by PC, no idea why. Any idae how to get 6.x using the terminal app in CM10 and wifi?
confusedman112 said:
CM10 ROMs boot.
I think it's because I used CWM 5.x rather than 6.x. Phone isn't recongized by PC, no idea why. Any idae how to get 6.x using the terminal app in CM10 and wifi?
Click to expand...
Click to collapse
Install EZ-Recovery from the play store and flash 6.0.1.0?
PJnc284 said:
Install EZ-Recovery from the play store and flash 6.0.1.0?
Click to expand...
Click to collapse
Thanks. Flashing Synergy now to test it...let's see what happens.
EDIT: Flashed just great, but still isn't working. But, it's cool, CM10 mods work and I got what I needed (exported Verizon contacts and improted them to Google Contacts using My Verizon's webstie)
confusedman112 said:
CM10 ROMs boot.
I think it's because I used CWM 5.x rather than 6.x.
Click to expand...
Click to collapse
Yep, that's exactly the problem. You installed a non-kexec recovery and your roms still use kexec.
You're sure you selected the right options in EZ recovery? Open it, scroll to the recovery pane, select the "recovery" radio button, change the drop down menu next to it to CWM 6.0.1.0, click the "Flash!" button. That should let you install whatever roms or kernels you like.
lazarus2405 said:
Yep, that's exactly the problem. You installed a non-kexec recovery and your roms still use kexec.
You're sure you selected the right options in EZ recovery? Open it, scroll to the recovery pane, select the "recovery" radio button, change the drop down menu next to it to CWM 6.0.1.0, click the "Flash!" button. That should let you install whatever roms or kernels you like.
Click to expand...
Click to collapse
Dang. How do I undo the bootloader unlock so I can redo it with the proper CWM?
confusedman112 said:
Dang. How do I undo the bootloader unlock so I can redo it with the proper CWM?
Click to expand...
Click to collapse
Being unlocked shouldn't have any impact on being able to flash using ez-recovery. One thing you can try is use EZ-Recovery to flash stock recovery, odin back to the stock verizon image which should relock the bootloader and start all over.
confusedman112 said:
Dang. How do I undo the bootloader unlock so I can redo it with the proper CWM?
Click to expand...
Click to collapse
why dont you take some time and read before flashing...this s*** is getting rediculous! Your questions are answered in multiple threads on this forum. Actually I just answered your question in a thread right below this!! Sorry not trying to be a ****...sigh.
droidstyle said:
why dont you take some time and read before flashing...this s*** is getting rediculous! Your questions are answered in multiple threads on this forum. Actually I just answered your question in a thread right below this!! Sorry not trying to be a ****...sigh.
Click to expand...
Click to collapse
Because I am at work and don't have time to find and locate? Could you reference it, please?
PJnc284 said:
Being unlocked shouldn't have any impact on being able to flash using ez-recovery. One thing you can try is use EZ-Recovery to flash stock recovery, odin back to the stock verizon image which should relock the bootloader and start all over.
Click to expand...
Click to collapse
Why do you need to flash stock recovery to use Odin to flash stock Verizon rom? Odin has nothing to do with what recovery you have installed. I flashed stock unrooted rom while rooted and having CWM recovery, it worked just fine. Once you flash stock rom, it restores the stock recovery too anyway. I'm fairly sure of this, but if I'm wrong, please correct me anybody.
newuser134 said:
Why do you need to flash stock recovery to use Odin to flash stock Verizon rom? Odin has nothing to do with what recovery you have installed. I flashed stock unrooted rom while rooted and having CWM recovery, it worked just fine. Once you flash stock rom, it restores the stock recovery too anyway. I'm fairly sure of this, but if I'm wrong, please correct me anybody.
Click to expand...
Click to collapse
Just to be safe. Wanted to get rid of the sprint related elements from the original root so I Odin'd back to stock with cwm installed using the VRALF2 tar found here. Tried to boot into recovery to factory reset prior to first boot and had 0 recovery (not stock nor cwm). Luckily the rom booted and I used the simple root method to root and install EZ-Recovery to install CWM.
If I flashed synergy v1.7 and used rom manager v5.x.x and then unlocked the boot loader how would I flash a new rom? Do I have to use ez recovery with clockwork mod v6.x.x since it is now unlocked or can I continue using rom manager with clockwork mod 5.x.x. I'm a noob and won't be looking to switch roms until synergy gets jellybean. Thanks for the help and hopefully I made sense with my question
synergy to beans to synergy bootloop
I think my issue might be related to the issues stated above.
So after after having unlocked my bootloader with EZ unlock & installing beans custom Rom via TWRP , I decided to go back to synergy. I made a nandroid of my synergy which was origianlly installed with CWM and figured I could just wipe and restore that with TWRP. Total bootloop.
OK, so I pulled the battery, tried it again...bootloop.
SO I pulled the battery, wiped and installed the synergy zip thinking I could try a fresh install. I got a message in TWRP that E:sd-ext was not found, but wipe seemed to happen so I continued the process.
installation said it was successful but now when I try to boot up, I either get stuck in the android is upgrading applications (looping over and over) or it gets through there and tells me all teh com.android.xxxx applications unexpectedly stop.
is this a soft brick? can I recover from this? are there incompatibilities between the kernels of bean's custom rom and synergy for verizon samsung galaxy s3?
after unlocking thru the ez tool installed twr recovery and installed the synergy rom and its just stuck on samsung galaxy s logo please help what do i do?
flameinthefire said:
after unlocking thru the ez tool installed twr recovery and installed the synergy rom and its just stuck on samsung galaxy s logo please help what do i do?
Click to expand...
Click to collapse
Sounds like an bootloop, just odin back to stock and try again.
If you remove the battery and turn it back on, will it boot into recovery?
power+vol up+home button
Karl said:
power+vol up+home button
Click to expand...
Click to collapse
yes it turns back on but i have unlocked it and its on twp recovery which rom would work with it?
i tried flashing mr beans rom that didnt work beacuse i am on twp recovery and i tried flashing synergy rom that didnt work either so wat should i do. since i unlocked the phone can i still do odin? or will that brick my phone
guys please help!
flameinthefire said:
guys please help!
Click to expand...
Click to collapse
is there any rom that i can use for my unlocked s3
flameinthefire said:
guys please help!
Click to expand...
Click to collapse
Someone already told you what to do. Find a stock ROM, boot up Odin and flash.
the roms you tried work with TWRP... ive used TWRP since release
Karl said:
the roms you tried work with TWRP... ive used TWRP since release
Click to expand...
Click to collapse
I don't think they work with TWRP. They will flash fine but they wont boot. I had the same problem as the OP when i flashed them. I guessing its because they aren't setup for unlocked phones yet. OP all you need to do is wipe using TWRP then flash the cyanogen mod 10 leak posted by CVPS. Make sure you flash gapps and you will be good to go.
Locked or unlocked phone shouldn't matter as far as the Rom is concerned, it's been stated many times that the kexec kernels will boot fine on an unlocked phone. I would suggest starting fresh, stock ODIN, root, unlock, then flash CWM 6.0.1.0 with ez recovery and go from there.
Some people are not having any issues with the touch recoveries and others are, in my experience the CWM recovery has been the most stable and I could really care less about "touching" my recovery, buttons do the same thing. Just my 0.02
Sent from my Galaxy S III using Xda Premium
feel like an old man hearing these stories......we all know them...when we first started out flashing and **** went wrong....freak outs..panics....sweating..pacing..anger....regret.........BUT then you work through them and look back and say "**** that was easier than I thought"....and we come across them again without panic or hesitation........................dude relax........
1-grab a stock image...chose anyone you want in these forums..some are even prerooted.....i personally got competely back to stock
2-i use the one click root method..so root
3-flash cmw...any version you want as long as it is made for your model phone.....you can use e-z recovery app from market
4-MAKE A ****ING BACKUP!!! very important...
5-download e-z unlock from the play market..use...and done..now you are stock, rooted, unlock bootloader......if you plan on flashing cm10 or aokp or aosp....please make sure to read the thread "how to backup your imei" before flashing any of those roms.............boom goes the dynamite:laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh:.............................
King_tee said:
I don't think they work with TWRP. They will flash fine but they wont boot. I had the same problem as the OP when i flashed them. I guessing its because they aren't setup for unlocked phones yet. OP all you need to do is wipe using TWRP then flash the cyanogen mod 10 leak posted by CVPS. Make sure you flash gapps and you will be good to go.
Click to expand...
Click to collapse
Kexec roms don't but synergy should have. I use twrp and Synergy no problem. There isn't anything special that has to be setup for an unlocked bootloader.
Op you should be able to flash any non kexec rom. Did you do a wipe factory reset? If not you may want to give that a try
Haven't seen anyone post about this (even after doing a Google search), but Verizon has started sending out the OTA today. My question is this: since my bootloader in unlocked, and I'm rooted, can I restore back to my stock ROM and take the update? Is there a possibility that I'd completely lose root? Obviously I'd lose superuser and such, but would it replace my bootloader and custom recovery?
Thanks in advance for any helpful replies. I've been around android for a while now, but I'm new to Samsung phones, and how the bootloaders work. (I'm used to HTC where you S-OFF and you're good to go)
tylerlawhon said:
Haven't seen anyone post about this (even after doing a Google search), but Verizon has started sending out the OTA today. My question is this: since my bootloader in unlocked, and I'm rooted, can I restore back to my stock ROM and take the update?
Click to expand...
Click to collapse
Yup, you can restore back to stock (via nandroid or Odin) and take the update. You should switch back your recovery if you restore a stock nandroid though.
Is there a possibility that I'd completely lose root? Obviously I'd lose superuser and such, but would it replace my bootloader and custom recovery?
Thanks in advance for any helpful replies. I've been around android for a while now, but I'm new to Samsung phones, and how the bootloaders work. (I'm used to HTC where you S-OFF and you're good to go)
Click to expand...
Click to collapse
You answered your question, if you lose SU, you lose root. Verizon OTA's will replace your bootloader and custom recovery if you force the install to take through your custom recovery. It should fail initially but I've read around that folks installed the OTA in recovery.
I'll check my wife's phone tonight. If she gets the ota I will pull it from the cache and extract the boot loader and recovery and rezip it and see if it will flash via twrp
SlimSnoopOS said:
Yup, you can restore back to stock (via nandroid or Odin) and take the update. You should switch back your recovery if you restore a stock nandroid though.
You answered your question, if you lose SU, you lose root. Verizon OTA's will replace your bootloader and custom recovery if you force the install to take through your custom recovery. It should fail initially but I've read around that folks installed the OTA in recovery.
Click to expand...
Click to collapse
Ok thanks for the reply. What do you mean by switch back my recovery? I'm currently on TWRP which is what I rooted with, and I've been using it since. I just want a completely untampered stock OTA of the latest OTA.
tylerlawhon said:
Ok thanks for the reply. What do you mean by switch back my recovery? I'm currently on TWRP which is what I rooted with, and I've been using it since. I just want a completely untampered stock OTA of the latest OTA.
Click to expand...
Click to collapse
I mean, the OTA will fail if you just try to accept it right now. It would also fail if you switched back to your stock nandroid because you still have TWRP installed too. That's how its always been. Switching to the stock recovery, you could use EZ Recovery to do so, would resolve that.
I've read that you can still have a custom recovery installed and successfully take the OTA with a custom recovery installed but idk the exact steps to take to make this happen. Since I have no need for accepting OTA's I try to learn from what people post here.
Edit: Seems my OTA/custom recovery inquiry has been answered pretty thoroughly here (post #10). You could try those steps if you desire too.
SlimSnoopOS said:
I mean, the OTA will fail if you just try to accept it right now. It would also fail if you switched back to your stock nandroid because you still have TWRP installed too. That's how its always been. Switching to the stock recovery, you could use EZ Recovery to do so, would resolve that.
I've read that you can still have a custom recovery installed and successfully take the OTA with a custom recovery installed but idk the exact steps to take to make this happen. Since I have no need for accepting OTA's I try to learn from what people post here.
Edit: Seems my OTA/custom recovery inquiry has been answered pretty thoroughly here (post #10). You could try those steps if you desire too.
Click to expand...
Click to collapse
Hmmm sounds interesting. I doubt I'd be able to use EZ unlock like I did on ICS... I guess I'll wait for a recovery flashable file.
What OTA?
cammykool said:
What OTA?
Click to expand...
Click to collapse
4.1.2 ota being pushed starting today. According to Google+
Is this basically the same thing as the VRBMA2 leak?
pettigrew95 said:
Is this basically the same thing as the VRBMA2 leak?
Click to expand...
Click to collapse
Yes, it's a final version of VRBMA2 leak which is VRBMB1
Damn.... on the day i root... oh well glad i did!
vzw probably blocked our current methods.
The OTA de-odexed is already posted courtesy of beanstown over here:
http://forum.xda-developers.com/showthread.php?t=2177798
I'm rooted, unlocked and custom recovery w/stock ROM (odex).
How do I get this update installed and keep root/unlocked/custom recovery in place?
Also want to keep Google Wallet working correctly.
lexluthor said:
I'm rooted, unlocked and custom recovery w/stock ROM (odex).
How do I get this update installed and keep root/unlocked/custom recovery in place?
Also want to keep Google Wallet working correctly.
Click to expand...
Click to collapse
Download this and flash it through recovery once beanstown posts the links:
http://forum.xda-developers.com/showthread.php?t=2177798
pettigrew95 said:
Download this and flash it through recovery once beanstown posts the links:
http://forum.xda-developers.com/showthread.php?t=2177798
Click to expand...
Click to collapse
I'd rather have the odex version though. You think someone will post that?
OK I took it from cache. Does anyone remember what all I need to delete after I extract it so it doesn't update boot loader. Recovery for sure...here's where I am before i rezip
I just recently got the newest update. I downloaded all 99mb of it, plugged in my charger and it rebooted to update my phone. But when it turned on again my phone hasn't been updated, it's still 4.4.2. Checking for updates doesn't work at all.
Anyone have a clue where the download is stored so I can just try to manually flash it?
Stock ROM & Kernel 4.4.2
Rooted
CWM Touch recovery
Sent from my Nexus 5
JustinBieber said:
I just recently got the newest update. I downloaded all 99mb of it, plugged in my charger and it rebooted to update my phone. But when it turned on again my phone hasn't been updated, it's still 4.4.2. Checking for updates doesn't work at all.
Anyone have a clue where the download is stored so I can just try to manually flash it?
Stock ROM & Kernel 4.4.2
Rooted
CWM Touch recovery
Sent from my Nexus 5
Click to expand...
Click to collapse
I read somewhere that the script will abort if your device is rooted. Not sure if this applies to you.
robbham78 said:
I read somewhere that the script will abort if your device is rooted. Not sure if this applies to you.
Click to expand...
Click to collapse
Incorrect. Root has nothing to do with it. You will lose root after updating, but it's as simple as flashing SuperSU in your custom recovery to get it back. The reason it's failing is because you have a custom recovery, and are trying to apply the OTA from within Android. If you do that, you have to have stock recovery. If you are stock, just with root, you can flash the OTA.zip using your CWM recovery. The OTA.zip can be found in the /cache directory. I believe it reverts your custom recovery back to stock recovery, but getting it back is as easy as fastboot flashing it.
charesa39 said:
Incorrect. Root has nothing to do with it. You will lose root after updating, but it's as simple as flashing SuperSU in your custom recovery to get it back. The reason it's failing is because you have a custom recovery, and are trying to apply the OTA from within Android. If you do that, you have to have stock recovery. If you are stock, just with root, you can flash the OTA.zip using your CWM recovery. The OTA.zip can be found in the /cache directory. I believe it reverts your custom recovery back to stock recovery, but getting it back is as easy as fastboot flashing it.
Click to expand...
Click to collapse
Thanks guys, I didn't know everything had to be stock! plus I found out that xposed will also break the ota
There's an OTA help desk sticky thread in general that tells you everything you need to know
Sent from my Nexus 5 using Tapatalk
Hello it's been several days i can't find a solution to my problem. I flash official RTFR 4.1.2 via RDS Lite and then i upgrade to Kitkat 4.4.2 via OTA update.
When my phone reboot i have The Unlocked Bootloader Warning logo on the screen, but i lost the root.
This is the version i have: 180.46.127.XT925.CEE-Retail.en.EU.
I did install a recovery (Philz Touch, CWM,) but when i reboot to recovery it was not working and i had the google Droid with a red triangle.
I'd like to know if it is possible to root my phone in order to flash the CM12 ROM? Or with this official update i'm stuck with 4.4.2 and won't be able to root?
Thanks for your help.
When you install a custom recovery after taking the OTA, the recovery will usually ask you to disable stock recovery restore. If you don't, then the stock recovery will be reinstated upon next boot. Once you've got a custom recovery installed and disabled the stock recovery, you should be able to root it from there. Most modern recoveries will handle both the disabling of stock recovery restoration and install root (su) for you.
I know the one I use does.
CWGSM3VO said:
When you install a custom recovery after taking the OTA, the recovery will usually ask you to disable stock recovery restore. If you don't, then the stock recovery will be reinstated upon next boot. Once you've got a custom recovery installed and disabled the stock recovery, you should be able to root it from there. Most modern recoveries will handle both the disabling of stock recovery restoration and install root (su) for you.
I know the one I use does.
Click to expand...
Click to collapse
When i installed the recovery it didn't ask me to disable stock recovery restore. Where do i get that request, on my phone or on my PC? Which custom recovery that allow me to disable the stock recovery do you recommand?
After you install recovery, immediately power off your phone, boot straight back into recovery (not the OS, otherwise stock recovery will over ride the aftermarket recovery), once in recovery the update script will complete and the installation will be complete. Once in the recovery, you can choose the option that CW mentioned.
RikRong said:
After you install recovery, immediately power off your phone, boot straight back into recovery (not the OS, otherwise stock recovery will over ride the aftermarket recovery), once in recovery the update script will complete and the installation will be complete. Once in the recovery, you can choose the option that CW mentioned.
Click to expand...
Click to collapse
Thanks for you help!!!!! It did work!!! My phone is rooted now and i installed cyanogen 11. Getting ready to try CM12.
Thanks a lot
sjcbboy said:
Thanks for you help!!!!! It did work!!! My phone is rooted now and i installed cyanogen 11. Getting ready to try CM12.
Thanks a lot
Click to expand...
Click to collapse
Yay!
Sent from my HTC6525LVW using Tapatalk