No 4g service - Verizon Samsung Galaxy S III

I always had 4G LTE on my verizon galaxy S iii where I live but once I root with ROM: cm-10.0.0-d2vzw.zip and gapps: gapps-jb-20120726-signed.zip I no longer have the 4G being displayed on my status bar. It only says that I have 3G. Is it that I still have 4G but it's just being displayed at 3G or does 4G LTE not work with CM10? Thank you for your help.

You check to see if the mobile network is set to lte/cdma/evdo?

Reception is much worse with non-touchwiz roms. Like said, check your settings, but dont be surprised if it doesn't work as well as it did.
Try cleanrom, too.

CM 10 problems
SubliminalME said:
Reception is much worse with non-touchwiz roms. Like said, check your settings, but dont be surprised if it doesn't work as well as it did.
Try cleanrom, too.
Click to expand...
Click to collapse
I will try cleanrom as i am running in too many problems with CM10 such as my camera not working i.e. freezing after taking a picture I have to reboot my phone. Does the cleaenrom have no bugs?

godfather17 said:
I will try cleanrom as i am running in too many problems with CM10 such as my camera not working i.e. freezing after taking a picture I have to reboot my phone. Does the cleaenrom have no bugs?
Click to expand...
Click to collapse
Now running Clean Rom 5.6. A lot less bugs than CM10.

Related

[Q] Any good ICS solution for Rogers users as of April 2nd?

I've read through the threads on all the forums, and nothing definitive yet. Also things are changing so fast over the last few days, I figured this needed asking.
I'm hearing people say that some of the zip cooked ROMs can be installed on the 727R but only if you have the leak installed first with ODIN.
When I go through the leaked ROM thread, it says it doesn't work on Roger's Skyrockets.
So is there any way to take a stock, or non-stock GB ROM and get either the leaked ROM or a cooked ROM onto a 727R?
Thanks
This works on Rogers. I flashed this from stock rooted Rogers GB.
http://forum.xda-developers.com/showthread.php?t=1567817
Some minor bugs but there are solutions for them all so far.
Sent from my ICED SAMSUNG-SGH-I727R using xda premium
but to be honest my battery has been draining alot with this leak. also seems alot unstable atm. i know go ahead bash me but ive tried every rom to see if it would settle or be stable. but none so far and im just wondering if this leak is a problem for canadians or for "rogers" especially.
i didn't see anything about rogers incompatibility in this thread?
http://forum.xda-developers.com/showthread.php?t=1566820
wali01x said:
but to be honest my battery has been draining alot with this leak. also seems alot unstable atm. i know go ahead bash me but ive tried every rom to see if it would settle or be stable. but none so far and im just wondering if this leak is a problem for canadians or for "rogers" especially.
Click to expand...
Click to collapse
+1 today it's been unstable for me a lot and the battery leak is still happening
I think there may be slight differences between the Skyrocket & Rogers version, that only Samsung know about.
One only has to look at the Samsung Focus 1.3 & 1.4 revisions. Both are identical except for a minor difference, but it caused major headaches for MS when pushing updates. It wouldn't surprise me if Samsung does the same on the Android side.
So with this leak your running an unfinished ROM, & one that may not be intended for your revision of hardware
i think that could very well be true. because of this battery drain 2-3% every less than half hour is like does this rom really feel it should be like this. also reboot issues, rom hanging in here & there, its not about the "work-around" but actual work seems very unstable. their devs are even soo stupid that when i ripped dialer.apk they spelled dailer in 1 of the imgs rather then dialer..it made me laugh soo hard..
projectvirtue said:
i didn't see anything about rogers incompatibility in this thread?
http://forum.xda-developers.com/showthread.php?t=1566820
Click to expand...
Click to collapse
I've tried this version, Mostly worked ok but my caller ID stopped working?
I'm a newb so I can't post over there to find out if anyone else saw the same issue... maybe I did something wrong but everything else seemed to be great?
Thank you everyone for responding. Gonna wait a few days and see how this plays out for Rogers uses. Hope other Rogers users post results here.
If you are on Rogers, flash the thing from the second post then flash any of the other ICS ROMs.
GB-->ICS works
I used ICSMOD5 from here
http://forum.xda-developers.com/showthread.php?t=1566820
What I did:SGH-i727R
My ROM was running Malice from T989, with Streamline Kernel.
1)Backup!
2)Factory Reset
3)Advanced - Wipe Dalvik
4)Manual reset: - Mounts and storage, Format system,data & cache
5)Flash UCLA4 ICS radio
6)Flash the ICSMOD5_wipe version
7)Boot
8)Wait...wait even more...don't panic...
9)Enjoy
Everything including data and gps, and time issues were okay.
On the apex launcher, the messenger icon is bonked, just remove the shortcut and put the messaging shortcut again.
Wifi Tether: Starts up via toggle mod, can set password and stuff, computer connects to it but no data goes thru.
Will report back on battery use and possible issues.
So far so good.
how did you all get LTE to work?
i cannot for the life of me!!
johentie said:
how did you all get LTE to work?
i cannot for the life of me!!
Click to expand...
Click to collapse
Flash this modem http://forum.xda-developers.com/showpost.php?p=24140728&postcount=5
Then type *#2263# into the Phone and Select "[4] LTE Band Preference" then "[7] LTE ALL". Once you get an LTE signal, then type *#2263# again and this time Choose "[1] Automatic" and it should work.
I've had to do this a few times, but I have gotten stable LTE on all the ICS builds so far.
i keep getting unknown id on my calls instead of it showing the number
shaeelasim said:
i keep getting unknown id on my calls instead of it showing the number
Click to expand...
Click to collapse
I'm getting the same thing? No fix yet but have a look here
jwfraser said:
Flash this modem http://forum.xda-developers.com/showpost.php?p=24140728&postcount=5
Then type *#2263# into the Phone and Select "[4] LTE Band Preference" then "[7] LTE ALL". Once you get an LTE signal, then type *#2263# again and this time Choose "[1] Automatic" and it should work.
I've had to do this a few times, but I have gotten stable LTE on all the ICS builds so far.
Click to expand...
Click to collapse
Thanks... i tried that but i couldn't get an LTE signal.. the best i got was 1 bar of just signal..
i usually get 45mbps download speeds in my area... I'll try it again elsewhere..
confirm ICS-SUPERLITE 5.1 on Rogers Galaxy S2 I727
I like to endorse the custom ROM ICS-SUPERLITE 5.1 on Rogers Galaxy S2 I727. it is a SUPER ROM, improves the battery life, smooth, uncluttered and simple to install. mhx did a fabulous job.
ICS-SUPERLITE 5.1 is fantastic!
redleef said:
I like to endorse the custom ROM ICS-SUPERLITE 5.1 on Rogers Galaxy S2 I727. it is a SUPER ROM, improves the battery life, smooth, uncluttered and simple to install. mhx did a fabulous job.
ICS-SUPERLITE 5.1 is fantastic!
Click to expand...
Click to collapse
+ 1, actually this has become my daily driver. There are some quirks as in callerid coming in from a telus cell but other than that everything else is solid. Also got lte to kind of work but it's just been started to get setup in my area lol.
~PsyCl0ne
Sent from my SAMSUNG-SGH-I727 using XDA
I've been running Smooth Ice for almost 2 weeks with no issues. The first ROM I used to upgrade from GB was the one just called 'Working Rogers ICS ROM', or something like that. I used Superlite and then went to Smooth Ice and have no complaints.
well not to put my team's rom up. but if you use our rom after we're gonna update today you are not gonna wanna leave it =).. you think you had enough with other roms. haha you have seen nothing yet.

Data on CM9/CM10

Anybody Know how can i get back my 4g data? I have CM10 and it was working good for about one hr and now my data is gone, any idea?
That is apparently a known problem with the CM roms on this phone. Probably the only reason I haven't flashed it yet. Sorry.
Sent from my SCH-I535 using xda premium
Yeah I think I'm gonna switch to Synergy ROM because all CM9/CM10 based roms has the same problem e.g Paranoid and AOKP, also I have problems sending MMS I don't know if its just me or ROM problem
I've been watching the forums for all the AOSP roms and mms seems to be a fairly consistent problem that I don't want to deal with. That and I need my camera to be fully functional for work. I swear by CyanogenMod and I am waiting patiently for a build for this phone.
Sent from my SCH-I535 using xda premium
GserMx said:
Yeah I think I'm gonna switch to Synergy ROM because all CM9/CM10 based roms has the same problem e.g Paranoid and AOKP, also I have problems sending MMS I don't know if its just me or ROM problem
Click to expand...
Click to collapse
I've been running cm10 since the first preview as my daily driver. There are some issues, to be sure, but I'm living with them. 4G data should be working just fine (just as good as stock, in my experience). It's 3G data is very erratic: sometimes it'll cut out altogether and sometimes it'll fluctuate wildly between zero bars and full bars (or from -100 to -250db). This is a known issue regarding the RIL and will hopefully get fixed sooner than later.
MMS is also a know issue. You should be able to receive MMS, but sending MMS only works once after installing the rom. Once you reboot, it no longer works.
The camera is now working just fine (stills and videos), though there may still be a hiccup or two. I use the camera for Facebook, Foursquare, etc without issue now on cm10.
Other than that, the rom is very solid. Jellybean is silky smooth, Google Now & Voice Search is working good (though after a reboot I have to make a phone call to get voice search to work again). GPS is absolutely quick to lock on and without issue. The statusbar is much more clean on cm10 (jellybean) than on stock Touchwiz (cluttered mess with unnecessary icons).
Anyway, back to your issue with data. If you're not getting any data whatsoever, either you did something wrong or you need to do a fix. You can try the Phone Info app from the play store and select LTE/CMDA, which will usually fix the no data problem. You need to be careful though because you don't want to lose your IMEI (although there seems to be a fix now).
Download phone info from the market and select cdma/lte, 4g fixed
Sent from my SCH-I535 using xda app-developers app
I've been doing that and it works for few time and again it drops the 4g then I just get 1x icon or anything .
I would like to use cm10 is pretty good and smooth but I have too much problems with my 4G everything else works good.
Sent from my SCH-I535 using xda app-developers app

Poor Signal Strength with Cyanogen 10 & 10.1

I live and work in an area that has poor signal for Verizon. I almost immediately flashed to CM 10 after I got the Verizon Galaxy S3 because I was running CM 10 on my previous Sprint Galaxy S3 without issue. I have been updating the radio and RPM with each leak (currently running K3) and things got a little better but I constantly dropped calls. I had to flash back to stock because I flashed to CM 10.1 and my radio got messed up. I ran the newest stock rom for the last week and noticed a huge difference. I still had low signal but my data dropped less frequently and I could actually make phone calls in areas I couldn't before.
I rooted, and flashed to CM 10.1 and noticed right away the signal is not where it should be. I can't make phone calls inside of buildings with low signal at all, where with stock I could without issue. I love CyanogenMod but I don't think I can deal with the poor signal.
Any ideas on what could be causing this problem and maybe a possible resolution?
fowen said:
I live and work in an area that has poor signal for Verizon. I almost immediately flashed to CM 10 after I got the Verizon Galaxy S3 because I was running CM 10 on my previous Sprint Galaxy S3 without issue. I have been updating the radio and RPM with each leak (currently running K3) and things got a little better but I constantly dropped calls. I had to flash back to stock because I flashed to CM 10.1 and my radio got messed up. I ran the newest stock rom for the last week and noticed a huge difference. I still had low signal but my data dropped less frequently and I could actually make phone calls in areas I couldn't before.
I rooted, and flashed to CM 10.1 and noticed right away the signal is not where it should be. I can't make phone calls inside of buildings with low signal at all, where with stock I could without issue. I love CyanogenMod but I don't think I can deal with the poor signal.
Any ideas on what could be causing this problem and maybe a possible resolution?
Click to expand...
Click to collapse
Depends on where ya live, your mileage may vary. I get within 1-2 -dBm between the two.
Technically since we don't have the source code the reason CM10 has data is by a work around.
There really is nothing you can do. It is what it is. I've run devices with CM that have provided better signal, and usually were on sprint lol and then run them where they provide the same or slightly worse quality.
Happens.
Sent from my SCH-I535 using xda app-developers app
This does not ha e anything to do with cm 10. This this to do with the the phone radio. This is the reason why I switched to the DNA now I have Full bars everywhere I go. On my s3 I used to drop calls all the time.
Sent from my HTC DROID DNA.
Itzvik said:
This does not ha e anything to do with cm 10. This this to do with the the phone radio. This is the reason why I switched to the DNA now I have Full bars everywhere I go. On my s3 I used to drop calls all the time.
Sent from my HTC DROID DNA.
Click to expand...
Click to collapse
Your wrong...read OP post and you realize your wrong.
You have your DNA now leave and stop trolling.
Sent from my SCH-I535 using xda app-developers app
Ok I really hope I'm not beating the dead horse here but I have a similar problem on my verizon Galaxy s3 and I was hoping there might be a fix
My understanding is that the CM developers dont have the GS3 source for something (the RIL?) so they have to use a different RIL? I'm probably totally butchering that, because I dont understand the words I'm using, but from what I've gathered the signal is what it is on CM, and will not improve beyond where it is.
It is certainly usable for me, but there are many times my wife has 4g and I have 3g, or she has a 3g signal and I have nothing at all (she has a stock vzw gs3).
Restola said:
My understanding is that the CM developers dont have the GS3 source for something (the RIL?) so they have to use a different RIL? I'm probably totally butchering that, because I dont understand the words I'm using, but from what I've gathered the signal is what it is on CM, and will not improve beyond where it is.
It is certainly usable for me, but there are many times my wife has 4g and I have 3g, or she has a 3g signal and I have nothing at all (she has a stock vzw gs3).
Click to expand...
Click to collapse
I think you're correct on the RIL part.
I had the same issue on 10.1. I switched to an older radio, and though it is not perfect, it did give me better reception and the switch from 3g to 4g is faster. My radio is VRLHE
Why not try a rom like beans. It is a touch wiz rom that looks like aosp and had a lot of aosp features. That way the radios will work fine you will still have aosp stuff and all the goodness of being rooted.
Sent from my SCH-I535 using xda premium
Let's not get confused here. Tw rom's like beans are themed to look slightly aosp, but are far from it. Aosp has so many customization options that tw cannot come close to. (I'm an aosp guy, if you can't tell). That being said, signal strength will always be an issue on aosp based roms due to the Samsung ril only being licensed to samsung, hence only working on tw rom's. The official ril code will almost never be released as its how qualcom makes its money. Currently aosp rom's use a work around home brewed ril that is very effective, but not quite what stock rom will offer. So if your signal is poor where you are, aosp may not be the best choice for you, but for most the signal is just as good as tw, and imo the only way to run android.
Sent from my Nexus 7 using Tapatalk HD
I'm not confused, that's why I said looks like (aka themed like). Also I said some aosp features like MMS, camera/gallery, lock screen to name a few. Its no where near the same but if they are having issues which I read a few people do have with signal and losing data its a nice alternative and has SOME similar features.
Sent from my SCH-I535 using xda premium

Use without cellular and get speed with life?

First off, I am new to Android devices.
I got a Nexus S 4g, and I really only wan to play games on it. I have AT&T, and got this used phone for free. So, instead of getting an Android tablet, I have a phone I can play with.
This includes flashing things as it's already unlocked!
So, I really only want three things (other the stability) if possible, the ability to turn off cellular usage and keep WIFI on, good performance for apps, and battery life.
Any suggestions on what Android OS to be running (ICS or JB) and a ROM & Kernel combination that would work? I have played around with a number of them, but I can't seem to notice any real difference.
I can and already have flashed a number of things, including having to flash the Android open source JB because of being stuck with Clockwork recovery not allowing a USB mount and the phone not booting from trying JellyBam.
Got TWRP on, and I'm happy with it. I also got an extended battery at 1850mAh.
hp420 said:
You should have done your homework. Ns4g is a CDMA phone. At&t is a gsm carrier. You can't activate it on any carrier but sprint.
Click to expand...
Click to collapse
I suppose I should have been more clear, I plan on using it like a mini tablet. As such, I don't need the cellular option, and that's why I would like to if possible disable it so it won't try to connect with the Sprint network.
You should have done your homework. Ns4g is a CDMA phone. At&t is a gsm carrier. You can't activate it on any carrier but sprint.
You should still be able to use WiFi without activating it on Sprint.
SlimBean RC2 has been working well for me. No issues. WiFi always on. Battery life has been good as well with standard battery.
And this should have been posted in the Q&A section. Just sayin...
andrewddickey said:
You should still be able to use WiFi without activating it on Sprint.
SlimBean RC2 has been working well for me. No issues. WiFi always on. Battery life has been good as well with standard battery.
And this should have been posted in the Q&A section. Just sayin...
Click to expand...
Click to collapse
I'll try that out.
Sorry... if someone wants to move it, they can.
andrewddickey said:
You should still be able to use WiFi without activating it on Sprint.
SlimBean RC2 has been working well for me. No issues. WiFi always on. Battery life has been good as well with standard battery.
And this should have been posted in the Q&A section. Just sayin...
Click to expand...
Click to collapse
Yup...I noticed they mentioned in the OP they wanted to use att service, so in that circumstance this wouldn't work. But as you said, it will work with WiFi. That's what I'm doing with mine. I ordered my N4 this morning and I'll keep the ns4g as a dev device.
hp420 said:
You should have done your homework. Ns4g is a CDMA phone. At&t is a gsm carrier. You can't activate it on any carrier but sprint.
Click to expand...
Click to collapse
Well you can use it on cricket or other providers like cricket.
1031982 said:
First off, I am new to Android devices.
I got a Nexus S 4g, and I really only wan to play games on it. I have AT&T, and got this used phone for free. So, instead of getting an Android tablet, I have a phone I can play with.
This includes flashing things as it's already unlocked!
So, I really only want three things (other the stability) if possible, the ability to turn off cellular usage and keep WIFI on, good performance for apps, and battery life.
Any suggestions on what Android OS to be running (ICS or JB) and a ROM & Kernel combination that would work? I have played around with a number of them, but I can't seem to notice any real difference.
I can and already have flashed a number of things, including having to flash the Android open source JB because of being stuck with Clockwork recovery not allowing a USB mount and the phone not booting from trying JellyBam.
Got TWRP on, and I'm happy with it. I also got an extended battery at 1850mAh.
I suppose I should have been more clear, I plan on using it like a mini tablet. As such, I don't need the cellular option, and that's why I would like to if possible disable it so it won't try to connect with the Sprint network.
Click to expand...
Click to collapse
CyanogenMod 10. It is fast and stable on the Nexus S4g.
Use without cellular and get speed eith life?
Type *#*#4636#*#* into your dialer and it will open a testing menu. Open phone info and scroll down and turn off radio. Now the cellular radio will not operate at all or use any battery, so your battery life will jump quite a bit. Also some roms have a function to hide the radio signal indicator. As an added bonus, you can use google voice and grooveIP to make and recieve phone calls and texts over a wifi connection for free!
Edit: this works on every rom I have tried.
ttakacs said:
CyanogenMod 10. It is fast and stable on the Nexus S4g.
Click to expand...
Click to collapse
True, but the battery died in about 2 hours of WiFi usage. When I got the phone, it had CM9 RC2 on it already. That's with trying a couple different kernels and setting the CPU to "On Demand". It wasn't worth it.
hlxanthus said:
Type *#*#4636#*#* into your dialer and it will open a testing menu. Open phone info and scroll down and turn off radio. Now the cellular radio will not operate at all or use any battery, so your battery life will jump quite a bit. Also some roms have a function to hide the radio signal indicator. As an added bonus, you can use google voice and grooveIP to make and recieve phone calls and texts over a wifi connection for free!
Edit: this works on every rom I have tried.
Click to expand...
Click to collapse
I went into there, and it already said it was off. I guess turning off cellular data kills the radio as well.
hp420 said:
You should have done your homework. Ns4g is a CDMA phone. At&t is a gsm carrier. You can't activate it on any carrier but sprint.
Click to expand...
Click to collapse
I was simply saying that I don't want the radio on because I am on AT&T. I should have explained that because I can't use it, I would rather disable it so it's not using any of the battery.
OP first you need to familiarize yourself with the Forum Rules on posting in the correct section, Moved to here. Thank You.
andrewddickey said:
SlimBean RC2 has been working well for me. No issues. WiFi always on. Battery life has been good as well with standard battery.
Click to expand...
Click to collapse
Oddly enough, I have had SlimBean RC2 preform random reboots. It's a shame as it seemed to go so well and I really liked the custom DPI settings.
Update : Seems that I had something of an improper flash. I used TWRP and ran multiple flashes in a row.
I ran it again, and flashed the ROM, restarted into recovery, flashed GApps inverted, repeated, and flashed the Matr1x CFS kernel.
Is there a way to replace the per-installed Holo launcher? I like the Nova Launcher as it seems to use less RAM and I can have everything with a cube animation. If possible, I would like to remove the Holo HD Launcher as I have no need for it.
1031982 said:
Is there a way to replace the per-installed Holo launcher? I like the Nova Launcher as it seems to use less RAM and I can have everything with a cube animation. If possible, I would like to remove the Holo HD Launcher as I have no need for it.
Click to expand...
Click to collapse
You can use titanium backup to push nova to system and then freeze holo if you like or ever remove it.
I have found after replacing the launcher, SlimBean has become unstable. Every so often, it crashes and reboots. Aside from re-flashing, any other advise?
Also, the battery life seems to be just so so. I tried the kernel included and Matr1x 25.
AOKP with Matr1x seems to be rather stable and ok with the battery.
Sent from my SGH-i917 using Board Express
Just thought I would post a screenshot of the battery meeter so you all know what I can get.

Bell i337m - 4.3 release date 11/23/13

http://mobilesyrup.com/2013/11/20/b...r-23rd-also-brings-galaxy-gear-compatibility/
Looks like Bell i337m users will finally get their 4.3 rom! (and finally be able to use custom 4.3 roms without data drops).
Im going to assume that Rogers and all other canadian carriers will release around the same time.
:good::good::good:
Nice. Thanks for the info
Sent from my SGH-I337M using Tapatalk
Finally
Sent from my GT-I9505 using XDA Premium 4 mobile app
great news going back o stock
yepp...same here..
waiting for some body to post modem so i can flash with odin
can we kepp this thread going...
i'm on stock rooted with custom recovery ready to gooooo...
I gave up and used CyanogenMod installer a few days ago, worked like a charm.
What's this about data drops? I haven't noticed anything except that it shows fewer bars on LTE reception but the connection seems to work just as well.
haloimplant said:
I gave up and used CyanogenMod installer a few days ago, worked like a charm.
What's this about data drops? I haven't noticed anything except that it shows fewer bars on LTE reception but the connection seems to work just as well.
Click to expand...
Click to collapse
If I recall, data drops occur for 4.3 TW ROMs when the user does not have a 4.3 based modem.
I believe the data drop mostly happens when screen is off, but I could be wrong.
Im still on Omega 10.
On a side note, I might skip straight to 4.4 CM11... looks like fun.
Really looking forward to this....
Will someone be able to post the ROM when it is released? I'm on a 4.3 GE ROM, and would like to go back to a stock 4.3 ROM.
This is great, now if we could find out when Robbers will post their 4.3 modem.
I want to try Goldeneye 4.3 but don't want to deal with data drops.
what the hell are these data drops? ive been running Goldeneye for 2 weeks and not noticed anything regarding data dropping...
I keep hearing about data drop this and data drop that. I have not experienced any noticeable problem
Nobody talking about multiuser restricted profiles? This would be huge and we Canadians would be only ones to get it stock. Or a sign that this 'leaked' document might be bogus?
Sent from my GT-N5110 using Tapatalk 2
Modem will most likely be the same across Canadian carriers.
WarbyParker said:
This is great, now if we could find out when Robbers will post their 4.3 modem.
I want to try Goldeneye 4.3 but don't want to deal with data drops.
Click to expand...
Click to collapse
Sent from my SGH-I747M using XDA Premium 4 mobile app
TRusselo said:
what the hell are these data drops? ive been running Goldeneye for 2 weeks and not noticed anything regarding data dropping...
I keep hearing about data drop this and data drop that. I have not experienced any noticeable problem
Click to expand...
Click to collapse
what kernal are u using with goldeneye.......are u on gsm or lte.......it works fine if i switch to gsm no problems but lte is the problem
I'm using lte with t-mo ktoonzes kernel.
So just a heads up, I just jumped on Euroskank cm11 @ http://fitsnugly.euroskank.com/?rom=cm11&device=jflteatt to test if data drops exist for 4.2.2 modems running on 4.4.
I am running with MG1 Rogers modem at this time.
No data drops. I will update if it happens... but its been 2 hours and no issues at all.
Perhaps the issue really is with TW roms.
Side note - this ES-CM11 rom is fantastically stable. No reboots, no crashes, no major drains on stock kernel.
Felixpau86 said:
So just a heads up, I just jumped on Euroskank cm11 @ http://fitsnugly.euroskank.com/?rom=cm11&device=jflteatt to test if data drops exist for 4.2.2 modems running on 4.4.
I am running with MG1 Rogers modem at this time.
No data drops. I will update if it happens... but its been 2 hours and no issues at all.
Perhaps the issue really is with TW roms.
Side note - this ES-CM11 rom is fantastically stable. No reboots, no crashes, no major drains on stock kernel.
Click to expand...
Click to collapse
same here i was running 4.4 with kt kernal and no data drops.....how knows what's the problem so many possibility
Felixpau86 said:
So just a heads up, I just jumped on Euroskank cm11 @ http://fitsnugly.euroskank.com/?rom=cm11&device=jflteatt to test if data drops exist for 4.2.2 modems running on 4.4.
I am running with MG1 Rogers modem at this time.
No data drops. I will update if it happens... but its been 2 hours and no issues at all.
Perhaps the issue really is with TW roms.
Side note - this ES-CM11 rom is fantastically stable. No reboots, no crashes, no major drains on stock kernel.
Click to expand...
Click to collapse
Try making a phone call. I tried 4.4 on multiple ROMS and Kernals on my Rogers MG1 S4, and it will sometimes drop data or even cell signal. Was unable to even send a text message. It will come back online again, but not sure why this happens.
For now i started using Wicked's T-Mobile ROM. No issues at all.
I tried a call no issues so far. Cell signal has been good so far no drops yet touch wood.
Sent from my SGH-I337M using Tapatalk
TRusselo said:
what the hell are these data drops? ive been running Goldeneye for 2 weeks and not noticed anything regarding data dropping...
I keep hearing about data drop this and data drop that. I have not experienced any noticeable problem
Click to expand...
Click to collapse
What version of Goldeneye are you running? What carrier and kernel are you on?
I tried GE 10 a few weeks back but had nothing but drops in data / cellular. I was using KT T-Mo kernel with my Bell i337M.
Thanks.

Categories

Resources