[Q] Stuck on SGSIII Bootscreen - Verizon Samsung Galaxy S III

Before you post, "BLAKDSKF READ OTHER FORUMS BLUSDFLU!!!!!!!111!!!", please, PLEASE, read the whole post. I am not illiterate or a fool. I've spent the last few days researching similar posts, both on xda and other sites, and as far as I've found, this is the only post of this kind on the Verizon SGSIII forums, though there are some that are somewhat similar in the other SGSIII forums (though I think the root of the problem is different). If you can prove me wrong, please redirect.
The Long Story:
ok. SO. I was trying to root my SGSIII, unlock the bootloader, and install CM10. Simple enough, right? Not so. I got through the rooting tutorial at Link 1 relatively smoothly. For the record, I did the composite root and bootloader combo, and I installed CWM Touch Recovery, as per the guide. I also restored the Jellybean Bootchain. I think it was at this point I downloaded Titanium Backup (because forethought is not my forte) and backed up all my apps. I also made a backup with CWM Recovery, but there were errors. I forget the reason, but it aborted backup. I then tried to make a backup onto my external sd card, and some other errors popped up. Mainly that it couldn't find /android.secure (something along those lines) or /sd-ext (might have been something else. I'm going off memory) and skipped them. It still made the backup, so my illiterate, foolish self decided to roll with it and go ahead.
I then went ahead to Link 2, and with it being 2 AM, I stupidly decided to screw trying to figure out how to use Heimdall 1.4rc1 and continue to use ODIN for flashing. After all what's the difference, I thought. One flashing program is the same as another. I flashed the first two files. Well, in truth, I'm not sure if I flashed the first file. Since I just made a single folder for all the SGSIII Verizon flashing stuff, I had two files with similar names at the time. One from Link 1 and one from Link 2. The only difference was one was a boot chain, the other was a boot loader. Also, one ended with .md5 while the other ended with .tar. Sadly I tiredly picked one and flashed it. I think it was the .md5 one, but I'm not sure. Around this point, my micro sd card reader broke, so I decided to just use my other phone (Motorola Photon 4g running Joker's CM9) as a reader of sorts. I swapped them, used my phone to put the zip from Link 2 on it, and swapped them back. I say this because I'm not sure if that is what broke my md5sums or not (more on that in a sec).
Well, surprise, surprise, my phone got stuck on the animated, colorful "4G LTE" boot screen, except it was fully black, though the noise was playing. I think to myself, "No biggie. I'll just restore my previous backup," so I go back to restore it when I get the error 'md5sum mismatch'. I look up the problem, and after extensive, 3AM research (read: clicked the first link on google and blindly followed), I went with one guys advice, which was to create a blank nandroid.md5 file to force the restore. I figured, "Hey. This is pretty risky. I think I'll just restore the bootloader instead of the whole restore." Or at least that's what was going through my head as I went through with restoring the whole backup. Lo and behold, /system was corrupted, I assume, and it aborted restoring it. I reboot my phone only to find out that my phone gets stuck on the SGSIII boot logo. This is where I am now. I would go through with flashing a stock rom onto it to undo everything I've done, but ODIN won't recognize my phone anymore. I can still get into Download and Recovery Mode. All my backups are useless at the moment.
In Short:
I tried to root, unlock the bootloader, and flash CM10 on it
I messed up and ended up restoring a broken backup, md5sums be screwed.
Now ODIN won't recognize my phone and it's stuck at the SGSIII boot screen.
Is there any way to fix this or at least return it back to stock so I can start again?
If there's any other information you need, just ask. I'd be happy to give it. :laugh: This is my first post on these forums, so I'm not sure what information is standard. If you have any idea of what it might be, please drop a comment or something rather than just leaving. I'd like to know that people are actually reading this post.
And on an unrelated note, every time I try to flash with Heimdall, I get an error about there not being a certain .dll file, even though I downloaded the package from Link 2. Am I doing something wrong?
EDIT: I've already tried factory resetting and wiping the cache/dalvik cache. Most of my info is backed up anyway.
Links:
Link 1: http://forum.xda-developers.com/showthread.php?t=2046439
Link 2: http://wiki.cyanogenmod.org/w/Install_CM_for_d2vzw

What happens when you plug your phone into your PC? Have you tried deleting the drivers then reinstalling them either from Samsung or from the Kies program? You really have to try to mess up this phone and it seems like you definitely tried very hard in this regard.
Edit: Idk anything about Heimdall, I use Odin only so I can't help you there.

SlimSnoopOS said:
What happens when you plug your phone into your PC? Have you tried deleting the drivers then reinstalling them either from Samsung or from the Kies program? You really have to try to mess up this phone and it seems like you definitely tried very hard in this regard.
Edit: Idk anything about Heimdall, I use Odin only so I can't help you there.
Click to expand...
Click to collapse
I hadn't noticed before, but my phone doesn't even show a charge screen when plugged in, but that might just be the settings on the phone pre-root. I'm not sure because I left the phone on to see if it was just a time thing. The phone died and I have to recharge it.
After goofing around with the phone while on the charger for a while, I can get a charge screen to show up for a second. The standard "battery with a loading circle" type symbol for this type of error.
I just reinstalled the drivers. I'll let the phone charge for about 10 minutes or so, then test the phone.

dudeman9199 said:
I hadn't noticed before, but my phone doesn't even show a charge screen when plugged in, but that might just be the settings on the phone pre-root. I'm not sure because I left the phone on to see if it was just a time thing. The phone died and I have to recharge it.
After goofing around with the phone while on the charger for a while, I can get a charge screen to show up for a second. The standard "battery with a loading circle" type symbol for this type of error.
I just reinstalled the drivers. I'll let the phone charge for about 10 minutes or so, then test the phone.
Click to expand...
Click to collapse
Well if it died you should leave it on the charger longer than ten minutes if it is charging. If Odin recognizes it, your first step would be to try flashing a stock image.

SlimSnoopOS said:
Well if it died you should leave it on the charger longer than ten minutes if it is charging. If Odin recognizes it, your first step would be to try flashing a stock image.
Click to expand...
Click to collapse
Thanks. It would seem that it now recognizes the phone, from what I can tell. As soon as I get a stock rom, I'll flash it and post an update.

dudeman9199 said:
Thanks. It would seem that it now recognizes the phone, from what I can tell. As soon as I get a stock rom, I'll flash it and post an update.
Click to expand...
Click to collapse
Great! Use Droidstyle's guide or MrRobinson's thread for the proper images. Should be a good starting point.
Sent from my SCH-I535 using xda app-developers app

I just wanted to add that THIS is how you do a first post or any help needed post! Great details and is obvious you researchedyour problem as well.
The errors in cwm are actually normal. I think the corrupt backups are unrelated.
Sent from my SCH-I605 (AKA NOTE 2)

SlimSnoopOS said:
Great! Use Droidstyle's guide or MrRobinson's thread for the proper images. Should be a good starting point.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Thanks. I've finally booted up into the setup wizard. I guess from here on I can re-root, unlock the bootloader, and *hopefully* get a working backup and eventually flash CM10.
I guess this means Problem Solved? Again, Thanks.
kintwofan said:
I just wanted to add that THIS is how you do a first post or any help needed post! Great details and is obvious you researchedyour problem as well.
The errors in cwm are actually normal. I think the corrupt backups are unrelated.
Sent from my SCH-I605 (AKA NOTE 2)
Click to expand...
Click to collapse
Thanks. I'm just gonna assume that the problems stemmed from swapping the sd card and leave it at that.

dudeman9199 said:
Thanks. I've finally booted up into the setup wizard. I guess from here on I can re-root, unlock the bootloader, and *hopefully* get a working backup and eventually flash CM10.
I guess this means Problem Solved? Again, Thanks.
Thanks. I'm just gonna assume that the problems stemmed from swapping the sd card and leave it at that.
Click to expand...
Click to collapse
Perfect! Which thread did you end up using btw?
Sent from my SCH-I535 using xda app-developers app

SlimSnoopOS said:
Perfect! Which thread did you end up using btw?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I used droidstyle's thread for getting the stock rom.

Related

HTC Thunderbolt Issues - Stuck at HTC Logo... Recovery not working, etc...

here is my issue.
2 weeks ago, i rooted my phone. all was well. flashed CWM Recovery 5.0.2.1 for my Thunderbolt. I made a backup just before i rooted so that in case ANYTHING went wrong, it would unroot me and fix any problems. So, here i am, backing up apps with Titanium Backup, and it backed up fine. The next thing i did was start to uninstall HTC Bloatware... I knew which ones were the ones i could remove, plus even if i removed the wrong one, i could just restore using my image backup. After removal, the phone instantly ran better. i had over 65% free memory space... This was all well and good, until i rebooted the phone. the instant i rebooted my phone, i was getting the flashing HTC Quietly Brilliant screen. i had done NOTHING to it to cause this. It would alternate from HTC splash to Thunderbolt animation.
So, knowing what was wrong, (UI not loading) i went to recover my image from CWM. that went fine. but things just got worse. After a successful recovery (according to CWM) i rebooted, but to my surprise, now its worse. its stuck at the HTC boot logo. ALL MANNER OF ROMS DO NOT WORK!!! recoveries, new OS, anything, all the same result. AT LEAST with the thunderstick full blown ROM, i can get back to the looping splash screen, but not any further. i DONT KNOW what is wrong but i am hoping one of you mad phone geniuses out there can get my phone working. i tried getting s-off with revolutionary, but it failed because the phone has to be booted up for it to work, and is something i obviously cant do at this point... relocking the phone made things worse too because i unlocked using the HTCdev method.
This is not a boot loop, as it doesnt loop. it just sits there. i have tried every available resource on this, and other sites. i must have read over 1,000 posts in the past week to try and gather what the devil happened to my phone... If its any help, i did accidently delete the settings storage APK file, but a restore should have fixed that. i want to lock up the phone to send it in for repair but i cant gain s-off to flash a new radio with the phone in its current state. i know how to do all if these things but the phone wont let me.
Reformat the sd card to fat32 and flash an RUU file to put you back to stock.
Sent from my ADR6400L using xda premium
Does your computer recognize your device?
Sent from my ADR6400L using xda app-developers app
i am nearly pulling my hair out...
smtom said:
Reformat the sd card to fat32 and flash an RUU file to put you back to stock.
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
any RUU downloads that would have been available on multiupload.com are disabled and redirects to to "the internet vs., holywood". besides, as i said, any attempt to flash any rom no matter what it is fails. Well, technically it FLASHES ok, but doesnt actually work. as far as i know, the phone has 2 bootloaders in any given android phone. There is the primary HTC Bootloader (Hboot) and a secondary ROM UI Bootloader. (Android Boot) i think what has happened is that this part has become corrupted and i wanted to know how to access this and reformat that. supposedly you cant because its partitioned, and formatting the partitions would fix my issue. problem is that i have done all of this. to answer the second reply, yes, i can get the phone to be recognized in any mode as long as its fastboot, or recovery. Fastboot.exe works, and adb recognizes it in recovery as being IN recovery mode. unfortunately, with my device still locked, i cannot flash a new bootloader, which might solve my problem. this is not like any issue currently on XDA so far as i read, so this is why i created a new thread.
I am sure the Moderators will agree that my problem seems to be unique. After reading what seems to be hundreds of forums, i cannot solve the issue. While technically i am a newbie here, i am no stranger to modding phones. i have been at it for over 4 years now. THIS problem is absolutely a first for me. At least before i could restore using CWM, but even that failed. i checked my MD5 Sum for CWM backup and it checked out.
If someone can provide me a link to an ORIGINAL, unmodded, RUU that shipped with the phone, (PRE OTA 2012) that ISNT that stupid file-factory corrupted crap, i would be extremely indebted to that person. last time i used File-factory, it took THREE hours and the download was corrupted according to CWM. it refused to flash the phone even though Chrome said it completely downloaded (Error: Bad - Installation Aborted). There was no MD5 SUM to compare with so thats also another problem. i absolutely need that info to properly flash the phone. All the other ROMS i downloaded like TSGB and Lightning Rom technically flashed fine after a full wipe, but refused to go past their own "Open Mobile" splash screen.
So you see, i am at a loss with this phone, as all i did was reboot after rooting it, and nothing i did could have possibly caused this kind of failure...
cyberkeeper1 said:
any RUU downloads that would have been available on multiupload.com are disabled and redirects to to "the internet vs., holywood". besides, as i said, any attempt to flash any rom no matter what it is fails. Well, technically it FLASHES ok, but doesnt actually work. as far as i know, the phone has 2 bootloaders in any given android phone. There is the primary HTC Bootloader (Hboot) and a secondary ROM UI Bootloader. (Android Boot) i think what has happened is that this part has become corrupted and i wanted to know how to access this and reformat that. supposedly you cant because its partitioned, and formatting the partitions would fix my issue. problem is that i have done all of this. to answer the second reply, yes, i can get the phone to be recognized in any mode as long as its fastboot, or recovery. Fastboot.exe works, and adb recognizes it in recovery as being IN recovery mode. unfortunately, with my device still locked, i cannot flash a new bootloader, which might solve my problem. this is not like any issue currently on XDA so far as i read, so this is why i created a new thread.
I am sure the Moderators will agree that my problem seems to be unique. After reading what seems to be hundreds of forums, i cannot solve the issue. While technically i am a newbie here, i am no stranger to modding phones. i have been at it for over 4 years now. THIS problem is absolutely a first for me. At least before i could restore using CWM, but even that failed. i checked my MD5 Sum for CWM backup and it checked out.
If someone can provide me a link to an ORIGINAL, unmodded, RUU that shipped with the phone, (PRE OTA 2012) that ISNT that stupid file-factory corrupted crap, i would be extremely indebted to that person. last time i used File-factory, it took THREE hours and the download was corrupted according to CWM. it refused to flash the phone even though Chrome said it completely downloaded (Error: Bad - Installation Aborted). There was no MD5 SUM to compare with so thats also another problem. i absolutely need that info to properly flash the phone. All the other ROMS i downloaded like TSGB and Lightning Rom technically flashed fine after a full wipe, but refused to go past their own "Open Mobile" splash screen.
So you see, i am at a loss with this phone, as all i did was reboot after rooting it, and nothing i did could have possibly caused this kind of failure...
Click to expand...
Click to collapse
https://dl.dropbox.com/u/61129367/Stock-ROM.zip
013CBDD3A9B28BC894631008FA2148E2
will this really work??!? lol
trter10 said:
https://dl.dropbox.com/u/61129367/Stock-ROM.zip
013CBDD3A9B28BC894631008FA2148E2
Click to expand...
Click to collapse
If this works, i will be forever grateful. and something that mere Custom ROMS wont do, is repair any boot issues and lock up my phone again right? i hope at least it fixes the issue.
new problem... i think...
cyberkeeper1 said:
If this works, i will be forever grateful. and something that mere Custom ROMS wont do, is repair any boot issues and lock up my phone again right? i hope at least it fixes the issue.
Click to expand...
Click to collapse
ok. so the download finished fine so far as i know, but now CWM says ITS bad too. i will try again but i cant seem to flash any stock rom no matter if its OTA or pre-OTA from CWM. is there a way to flash a rom from the PC via adb or something?
Ohh! They're not flashed through CWM. They're flashed through hboot. Just rename it to PG05IMG.zip and put on SD card and boot to hboot it will ask you to flash
Sent from my ADR6400L using Tapatalk 2
i will try that. previous hboot flashes always fail. it reads the archive, but never goes to "checking zip". it loads, checks, and then parses. i was successful with my evo shift earlier today, but that thing is ancient compared to my thunderbolt. With the Shift, i was able to gain root AND s-off with an old bootloader and i dont even need a new one.
i wanted to do the same with my bootloader in case another disaster hits because then i can flash whatever RUU i want with s-off. i will make sure the MD5 SUM matches before flashing. i forgot to do that anyhow.
Hboot flash failed. went through the motions of scanning it and it scanned the whole thing and then did nothing. it returned me to Boot Choices. Like Fastboot, recovery, etc... i tried twice. are you absolutely certain that is the shipping firmware that formats the entire phone, and not just updates it? i cant send it to verizon even though they know it was illegal to lock up my phone... Anyhow, i realy need this thing working and i have racked my brain enough to damage it already... lol. if it fails again i will try to redownload it. So far it loads and does NOT ask me to start the update. could be a version issue because it does not complain about anything else.
Have you tried following the instructions in the return to stock thread in the android development section stickies? This may help you.
Sent from my ADR6400L using xda app-developers app
lemew said:
Have you tried following the instructions in the return to stock thread in the android development section stickies? This may help you.
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
yes i have. i cannot do what it asks because it requires my phone to be functional to flash it using hboot. i need a signed copy of an older RUU. hboot doesnt do anything with it. its a valid copy, and i can see all the images and contents in windows and linux, but all i can get hboot to do is read it, then it doesnt ask me to update. i dont know what to do now.
I believe there is a ruu image without hoot download there.
Sent from my ADR6400L using xda app-developers app
---------- Post added at 06:39 PM ---------- Previous post was at 06:34 PM ----------
Try http://shipped-roms.com/index.php?category=android&model=Mecha
Sent from my ADR6400L using xda app-developers app
ok well i will literally try ALL of the signed images. i will see if hboot will update it.
If your hboot is flashed with revolutionary I believe you have to unlock it before anything thing else can be flashed over that. Hboot or emmc could be corrupted as well.
Sent from my ADR6400L using xda app-developers app
How i fixed my tbolt stuck at the white HTC screen
I had this exact same problem literally yesterday (stuck at HTC screen) with some different cwm symptoms. I'm guessing my cwm was corrupted because the phone would reboot after about 30 seconds being in cwm, preventing me from flashing any roms. oh, and my backup image was corrupted as well. awesome. Flashing other CWMs did not fix the CWM problem.
Your problem sounds similar in the fact the CWM won't flash properly. You're trying to fix it by trying to flash a rom in HBOOT that isn't configured to be flashed that way. for example, i put the skyraider rom (named properly) in the root folder and tried to flash with HBOOT. it scanned and parsed but didn't give me the option to flash.
What I did was go here and grab a stock like image:
androidforums.com/thunderbolt-all-things-root/418539-thunderbolt-root-unroot-thread.html
(won't let me make a link, i'm too new)
Go to the "Putting current stock firmware and s-on back onto the phone" section.
Download file 1 and flash it using HBOOT. I had to pull my sd card to get the file on there since cwm was crashing. Only flash that rom and nothing else. It flashed for me; if it doesn't flash for you then maybe your HBOOT is corrupted, and if so i don't know if you can fix it.
Once that flashes, reboot the phone and it should return to some level of functionality. You'll have S-off but no recovery or root tools installed. I ran revolutionary at this point, which recognized i already had S-off...then it offered to load CWM. This i did. in the meantime i deleted the unrooted image and put the image of the rom i wanted on the sd card. i then booted into recovery(it won't flash in HBOOT) and loaded that rom (skyraider zeus). That worked fine and the cwm didn't crash out.
I hope this works for you. I was getting ready to fire back up my OG droid before i did this.
mpcapps said:
I had this exact same problem literally yesterday (stuck at HTC screen) with some different cwm symptoms. I'm guessing my cwm was corrupted because the phone would reboot after about 30 seconds being in cwm, preventing me from flashing any roms. oh, and my backup image was corrupted as well. awesome. Flashing other CWMs did not fix the CWM problem.
Your problem sounds similar in the fact the CWM won't flash properly. You're trying to fix it by trying to flash a rom in HBOOT that isn't configured to be flashed that way. for example, i put the skyraider rom (named properly) in the root folder and tried to flash with HBOOT. it scanned and parsed but didn't give me the option to flash.
What I did was go here and grab a stock like image:
androidforums.com/thunderbolt-all-things-root/418539-thunderbolt-root-unroot-thread.html
(won't let me make a link, i'm too new)
Go to the "Putting current stock firmware and s-on back onto the phone" section.
Download file 1 and flash it using HBOOT. I had to pull my sd card to get the file on there since cwm was crashing. Only flash that rom and nothing else. It flashed for me; if it doesn't flash for you then maybe your HBOOT is corrupted, and if so i don't know if you can fix it.
Once that flashes, reboot the phone and it should return to some level of functionality. You'll have S-off but no recovery or root tools installed. I ran revolutionary at this point, which recognized i already had S-off...then it offered to load CWM. This i did. in the meantime i deleted the unrooted image and put the image of the rom i wanted on the sd card. i then booted into recovery(it won't flash in HBOOT) and loaded that rom (skyraider zeus). That worked fine and the cwm didn't crash out.
I hope this works for you. I was getting ready to fire back up my OG droid before i did this.
Click to expand...
Click to collapse
I have read that post you provided probably 100 times its not working for me. flashing a custom rom actually got me past the HTC white screen and into a splash screen loop (Open Mobile). Also, I havent even been able to use the REV tool because my phone is not recognized by it without it being fully functional. you have to be fully booted up for the REV tool to use adb and start the process. thats why i need a signed copy of an older ROM with hboot flashing capability so i can fully restore my phone. i am 100% sure its a corruption issue, but i am out of clues as to how to actually get it to flash over while being s-on. with the evo shift it worked perfectly. it only took me 20 minutes to root, s-off and flash a custom rom. this phone has been a thorn in my side ever since i accepted that STUPID FOTA... i regret not knowing before hand what that OTA was and what it prevented. Now i know, too little / too late.
without s-off, i cant unlock hboot to flash it, and the fastboot mw whatever command failed also because its locked tight.
lemew said:
If your hboot is flashed with revolutionary I believe you have to unlock it before anything thing else can be flashed over that. Hboot or emmc could be corrupted as well.
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
thats what i thought. is there a way to change out that eMMC, or remove it to format it manually? i mean based on the description, its technically external which implies removable.
Yes you can format emmc I do not know if this will solve your problem. You wipe abd format through adb but need to see if it is being mounted first.
Sent from my ADR6400L using xda app-developers app
lemew said:
Yes you can format emmc I do not know if this will solve your problem. You wipe abd format through adb but need to see if it is being mounted first.
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
too bad i cannot repartition it to allow for more RAM instead of app space. i dont care about app space because i have a 32gb card... lol. i just want that phone to be faster than what it is currently once i finally get it running.

[Q] Boot Loop :(

My phone battery died last night, so I plugged it in and let it charge for 10 min then when I went to power it on, after the second samsung logo it shuts off and restarts, I boot into recovery and ive tried doing a factory reset and when it tries to format it crashes, and restarts about 5 seconds after saying formatting...
I was running a embryo rom, cant remember which one...
Any help is appreciated. I've looked around and cant seem to find much to help me so far.
Can you do a fresh install over top the existing ROM? Instead of trying to salvage the existing ROM.
Can you mount the USB in recovery?
Heeter
Heeter said:
Can you do a fresh install over top the existing ROM? Instead of trying to salvage the existing ROM.
Can you mount the USB in recovery?
Heeter
Click to expand...
Click to collapse
When I boot into recovery and try to wipe data/factory reset, it sats wiping data.. Formatting.... then 10 seconds later it reboots and goes into a boot loop.
When I try to install zip from sdcard (embryo 3.1 dist.zip) it says
-- Installing: /sdcard/embryo-3.1-dist.zip
Finding update package...
E: Cant mount /sdcard/embryo-3.1-dist.zip (Installation aborted).
Is there a way to wipe data/factory reset other than in CWM? I am running v5.8.4.3
Can you put the phone in download mode? If so, restore to stock from there. Format your SD cards, internal and external, as well, and make sure to wipe x3 so any damaged remnants are swept away.
T.J. Bender said:
Can you put the phone in download mode? If so, restore to stock from there. Format your SD cards, internal and external, as well, and make sure to wipe x3 so any damaged remnants are swept away.
Click to expand...
Click to collapse
When I plugged it into my computer it went to ODIN mode and says downloading...
I am not sure how I got it there, or what to do from this point. Do you have a link to the instructions on how to do that?
D-Duub said:
When I plugged it into my computer it went to ODIN mode and says downloading...
I am not sure how I got it there, or what to do from this point. Do you have a link to the instructions on how to do that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1652398
BEFORE YOU DO THAT, a few quick notes and thoughts:
1. Don't ever mess around in recovery/download if you don't know what you're doing. If you're not sure how you "got it there" or "what to do from this point," you don't know what you're doing. Read or brick.
2. Looking back at your first post, a couple of thoughts occur to me. One, are you trying to use recovery while plugged in? That can sometimes cause things to mess up, especially if you're plugged in while going into recovery. Wouldn't cause a bootloop though.
3. CWM 5.8.4.3 was a troublemaker, if I recall correctly. Are you on CWM touch, or CWM button-masher? CWM button-masher has a history of doing bad things to Skyrockets.
4. If your phone is not successfully completing the factory reset and you're not sure which ROM you're running, what in God's name made you think flashing a ROM on top of what's there was a good idea?
99.9999999% this is not a ROM problem. Lots of people are using the Embryo family without bootlooping on a battery charge, so I'm inclined to believe it's something else.
Restore to stock and pray, bud. Too many red flags for me to chalk this up to anything other than user error. Sorry.
@D-duub I do hope yiubread the above
Sent from my HTC Incredible S using xda app-developers app
T.J. Bender said:
http://forum.xda-developers.com/showthread.php?t=1652398
BEFORE YOU DO THAT, a few quick notes and thoughts:
1. Don't ever mess around in recovery/download if you don't know what you're doing. If you're not sure how you "got it there" or "what to do from this point," you don't know what you're doing. Read or brick.
2. Looking back at your first post, a couple of thoughts occur to me. One, are you trying to use recovery while plugged in? That can sometimes cause things to mess up, especially if you're plugged in while going into recovery. Wouldn't cause a bootloop though.
3. CWM 5.8.4.3 was a troublemaker, if I recall correctly. Are you on CWM touch, or CWM button-masher? CWM button-masher has a history of doing bad things to Skyrockets.
4. If your phone is not successfully completing the factory reset and you're not sure which ROM you're running, what in God's name made you think flashing a ROM on top of what's there was a good idea?
99.9999999% this is not a ROM problem. Lots of people are using the Embryo family without bootlooping on a battery charge, so I'm inclined to believe it's something else.
Restore to stock and pray, bud. Too many red flags for me to chalk this up to anything other than user error. Sorry.
Click to expand...
Click to collapse
Not using recovery while plugged in.
Not using CWM touch.
I couldn't recall the ROM when I wrote the OP, its stated in one of my replies. I tried re-flashing the rom that I had on my SD card (the one I had when everything went wrong).
Not sure how it could be user error when I have not messed with anything before my problem and since then all I have tried doing is reinstalling the rom, and when that didn't work I tried wipe data\factory reset.
So far I haven't done anything that was not recommended.
I am downloading the stock firmware now and I will use ODIN to flash and let you all know how it goes.
Thanks for the help so far.
Fixed!
I didn't lose anything, just my rom. Sweet.
I expected to lose my stuff, thats great news.
Thank you very much.
Now to reply to the million messages I got while my phone was down...
When in doubt, restore to stock.
Seriously though, I'm really glad you brought it back. If you're going to flash/mod/whatever, please, for your own sake, read through the stickies here. It'll take you a couple hours or so to do, and it'll save you from turning your phone into a paperweight later. And get rid of that non-touch CWM lol! sk8rwitskiis does a great version of CWM Touch for our Skyrockets, and TWRP is an excellent recovery as well.
T.J. Bender said:
When in doubt, restore to stock.
Seriously though, I'm really glad you brought it back. If you're going to flash/mod/whatever, please, for your own sake, read through the stickies here. It'll take you a couple hours or so to do, and it'll save you from turning your phone into a paperweight later. And get rid of that non-touch CWM lol! sk8rwitskiis does a great version of CWM Touch for our Skyrockets, and TWRP is an excellent recovery as well.
Click to expand...
Click to collapse
Will do. Thanks again.

unknown imei,basband, and everything else.

aight so ive searched and searched for all kinda different methods. and done all of them. is it possible to have a permanent brick?
heres the story. i had been running cm10 for prolly 4 or 5 months. no problems. i wanted to check out liquid smooth rom. so i flashed it. no problems. had been running it for a month or so then one day at work when i went on break my network was gone. my apn's were deleted. came home inspected some more and my imei was unknown as well as baseband and many others were unknown. i took it back to stock many times using. gtg method. using heimdel. using odin. with different stock files. from different websites. including xda. i have tried just about everything to re do the phone. including going back to cm10. and other known working roms. ive *#*#4636#*#* and manually switched to gsm which wont change when i click it it still says unknown.
i dont belive it is a rom problem. i have been overclocked 1300mhz. what else is out there can i try. \
\
any help will be very appreciated
Have you by chance odined back to stock then reupgraded to JB? If not I can get you the necessary steps to do so...let me know
Sent from my SGH-I997 using xda premium
FauxAffliction said:
Have you by chance odined back to stock then reupgraded to JB? If not I can get you the necessary steps to do so...let me know
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
yea i went to stock and back to cm10. still nothing. buttt now im unable to do any kinda flashes. im on rooted 2.3.6 threw odin. and no matter what i flash it will say somthing on the lines of failed to find file signature or what ever that code is. i tried changing the cwm in different ways still wont get off the what is it 2.5.2 cwm blue. ive basicly gave up. it seems its to far bricked or whatever the case may be
im sorry i need to correct that. i have not been able to flash to any other roms. i didnt go to stock and then cm10, due the the signature deal on cwm. i was thinking of another time i had problems. so no i have no been able to go to jb after the imei has went unknown
Did you flash a custom kernel to get cwm after going back to stock?
andros11 said:
Did you flash a custom kernel to get cwm after going back to stock?
Click to expand...
Click to collapse
im in able to flash anything.....
really? no one can help me?
Are you trying to flash through Odin? Or through CWM?
Sent from my SGH-I997 using xda premium
psal217050 said:
Are you trying to flash through Odin? Or through CWM?
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
dont know how to flash a cwm threw odin. i tried loading a cwm threw rom manager and manually
kritz84 said:
dont know how to flash a cwm threw odin. i tried loading a cwm threw rom manager and manually
Click to expand...
Click to collapse
but im pretty sure the problem isnt with cwm im more interested in why and how to the imei isnt known and how to fix this problem if theres a cure
Download a heimdall one-click or odin back to stock pack. Open either one up and put your phone in download mode:
- turn off and have the usb cable connected to the pc.
- remove and reinsert battery
- hold both volume buttons and connect usb. Phone should now boot into download mode.
Run program and you will be good. Then look for entropy's dd kernel and flash it in download mode to get cwm.
andros11 said:
Download a heimdall one-click or odin back to stock pack. Open either one up and put your phone in download mode:
- turn off and have the usb cable connected to the pc.
- remove and reinsert battery
- hold both volume buttons and connect usb. Phone should now boot into download mode.
Run program and you will be good. Then look for entropy's dd kernel and flash it in download mode to get cwm.
Click to expand...
Click to collapse
i guess u didnt read my first post. ive already done that. ive done many things....
but anyway weirdest thing just happend. i have been using my phone via wifi. so its been on a while without a sim card inside of it.
\
i noticed i had signal bars. i looked at the imei and its was a number. it was a different iemi then what its supposed to be but there was a imei. baseband was still unknown but anyway i shut the phone done and inserted my sim card. btw its a straight talk sim. and restarted it now im back to unknown imei......
ok so im back on cm10. before i was on cm10 its was giving me the imei which wasnt my original imei. i guess cuz i flashed a efs.tar. but anyway i was able to make a phone call. now im flashed on cm10. and no imei no baseband nothin. i tried flashing the efs again with odin and still nothing. when i do the *#*#4636#*#* it still wont let me switch to gsm. and i cant add a apn.
kritz84 said:
ok so im back on cm10. before i was on cm10 its was giving me the imei which wasnt my original imei. i guess cuz i flashed a efs.tar. but anyway i was able to make a phone call. now im flashed on cm10. and no imei no baseband nothin. i tried flashing the efs again with odin and still nothing. when i do the *#*#4636#*#* it still wont let me switch to gsm. and i cant add a apn.
Click to expand...
Click to collapse
odin or heimdall back to stock.
follow andros11's guide on how to flash jb
he spent the time to write the guide; spend the same amount to time to read the guide
Seems IMEI was kidnapped about a month after Liquid
Ironically, I seem to have EXACTLY the same issue that this original poster has. I have been flashing my Infuse for a little over a year now and I Flashed Liquid, I'd say about 3 weeks ago, maybe end of November. Everything has been smooth sailing. About a 2 days ago I started noticing that my network would just drop - for no reason. But at first it came back. Ok, no problem, probably just a glitch. However yesterday morning it happened again and then I was without the use of data for most of the day until around 6pm. It came back but the bars were grey but I was able to make a phone call. Once I made another call it did not go through, I tried to hangup and it just hung there. there was nothing I could do to get it to hang up. Rebooting the phone resulted in no bars at all. Nothing, nada, ziltch. So last night I reflash it a couple times and notice that there was an update to Liquid (2.1 beta). cool. I wipe, flash 2.1b and it is beautiful. EXCEPT for the fact that I have no network. wifi works fine, but no carrier whatsoever. GRRRR. I decided to back every thing up (have done so several times in the past), stock back down to 2.3.6. Barebones and all it all looked great until I hung up the phone... Same thing. So I went all Rambo on the phone, wiped it down to the very last compound. AT&T wouldn't know the wiser if they took it from me. Master Reset, wiped files, data, I think I took an IC out with all of the wiping I did... Result? No IMEI, circle with the slash. Upset, disappointed and dejected I slumped back to XDA (after I went on Craigslist feeling my phone was broke) to see if I missed anything. That was where I found some links about missing IMEI. To make a long story short, I DO have an old copy of EFS thanks to QKSTER, but I have no idea how to restore. I swear I have been on this since 6:30am and just now am I finding these threads. Must have gone through about 50 others... Sigh. BTW, along the way of my flashing experience today, my network came back temporarily, but I have not relied on it because I knew it would leave me. Just don't know how to use Heimdall to restore. To make a long story short, using Windows, could someone please help me with how to restore my EFS to see if this would solve my dilemma?
808
Dnice808 said:
To make a long story short, I DO have an old copy of EFS thanks to QKSTER, but I have no idea how to restore. I swear I have been on this since 6:30am and just now am I finding these threads. Must have gone through about 50 others... Sigh. BTW, along the way of my flashing experience today, my network came back temporarily, but I have not relied on it because I knew it would leave me. Just don't know how to use Heimdall to restore. To make a long story short, using Windows, could someone please help me with how to restore my EFS to see if this would solve my dilemma?
808
Click to expand...
Click to collapse
What is the format of your EFS folder?
*.zip
*.tar
just a folder?
If you have lost the signal while on JB, see if you can factory reset the phone.
/settings/privacy -reset
Then put it into download mode.
Use the heimdall 1 click uclb3 and flash it once, then without closing heimdall, check the bootloader box and flash it again.
After this, check your imei and band. If it works, no further back up is needed.
If you're still missing the imei, you can flash one of the gb kernel in the second post to get cwm.
Then use the root pack in post #2,
http://forum.xda-developers.com/showthread.php?t=1629079 to install root and su.
install a root tool like root explorer (remember to toggle the r/o r/w) or adb and copy the /efs into the phone's root efs folder,
reboot
check the baseband.
you can also check this thread
http://forum.xda-developers.com/showthread.php?t=1895500
qkster said:
What is the format of your EFS folder?
*.zip
*.tar
just a folder?
So it is in the .tar format that your script backed it up in. Finding another link on the we (which he also linked back to XDA, http://forum.xda-developers.com/showthread.php?t=1264021 I was able to take my backup (that I used with your script) and follow his steps -mostly- (my/your backup had a 'root' folder that had the nv_data.bin file in the afs/settings folder while the instructions did not mention that. I followed the backup location settings (which in turn was also the same as the default that I had backed up)) and replace the EFS folder. It still did not restore it in any flash image just like that. Still had the the circle w/slash. However while I was still searching and typing out that loooong last passage I wrote, my phone network came back for a little while. I know this because I began receiving a bunch of texts. I was able to make a phone call. But it still happened again when I made another, it did not go through and when I hung up, it just stayed there looking at me with its grey, blank look. Even killing the phone app did not work. I rebooted back to the same drama.
If you have lost the signal while on JB, see if you can factory reset the phone.
/settings/privacy -reset
I actually was on 2.3.6 using your posts, first the basic rooted flash having to then using the Entropy kernel and then I did the lazy flash that was already rooted and just having to add the vold file to /system/etc/blah/blah. I do want to add that I DID have wifi active at this time and it may not be associated, but the first poster did mention he felt it may have had something to do with it. With wifi on, after awhile of me NOT looking at the phohe (actually doing so made me want to HULK SMASH), the network came on and my texts came in. I was able to look in settings and see ATT, and my IMEI. I was almost finished with my passage to you so I decided to update to Liquid 2.1 beta, but moving up to JB, then to LiquidSmooth. Of course doing so I got the circle w/slash, but wifi started restoring my apps.
Earlier I mentioned that I did a whole rubba dub dub, meaning I did do the /settings/privacy -reset thingy, wiping the phones carcass. I will do it again (at this point nothing to lose), following everything you ask to a 'T'.
808
Click to expand...
Click to collapse
qkster said:
What is the format of your EFS folder?
*.zip
*.tar
just a folder?
If you have lost the signal while on JB, see if you can factory reset the phone.
/settings/privacy -reset
Then put it into download mode.
Done.
Use the heimdall 1 click uclb3 and flash it once, then without closing heimdall, check the bootloader box and flash it again.
Done
After this, check your imei and band. If it works, no further back up is needed.
Sigh, did not do a darn thing. Circle w/slash.
If you're still missing the imei, you can flash one of the gb kernel in the second post to get cwm.
Done.
Then use the root pack in post #2,
http://forum.xda-developers.com/showthread.php?t=1629079 to install root and su.
install a root tool like root explorer (remember to toggle the r/o r/w) or adb and copy the /efs into the phone's root efs folder,
reboot
check the baseband.
Went in Root Explorer, did the toggle, deleted the contents of efs then copied the contents of my backup into there. Rebooted. Nada.
you can also check this thread
http://forum.xda-developers.com/showthread.php?t=1895500
I then was going to try the other link using Odin, but I cannot get Odin to see my phone. I read some thread talking about if I use Heimdall I will have problems using Odin because they use the same ports? How frustrating. The weird part is now that I have the flashed, rooted 2.3.6 image and using wifi, at some point tonight my network may come back on. Or it may not.
808
Click to expand...
Click to collapse
Bugged out, huh?!!???
Dnice808 said:
Bugged out, huh?!!???
Click to expand...
Click to collapse
I wasn't sure if there was a question there.
From my experience, flashing to JB (MTD partition) from GB without going through ICS may result in lost of imei.
Sometimes, it just happens. I had very limited experience with JB.
The few methods that I've tried worked for me. Just simply flashing back to stock with a re-partition ( (Heimdall -1-click for me) usually brings back the /efs and imei without doing anything extra.
If you haven't, and if you can, I would try the heimdall-1-click a few times.
If you want to use Odin, you may need to reinstall samsung drivers and use a different usb port on the PC than the one you used for heimdall.
You may also want to check the signal of the phone at your location. you may be getting poor signal and it has nothing to do with the phone's OS
qkster said:
I wasn't sure if there was a question there.
Click to expand...
Click to collapse
Me stating that it is bugged out, was me just confirming that it is Weird!
qkster said:
From my experience, flashing to JB (MTD partition) from GB without going through ICS may result in lost of imei.
Sometimes, it just happens. I had very limited experience with JB.
Click to expand...
Click to collapse
Ok just to explain myself better. I have been saying that I was going from GB to JB when in fact I meant to say that I was going from GB to ICS. Sorry for that. Also, the reason my responses have looked wacky is that I was trying to select the multi quote button and getting no response. Hopefully this response is a little more organized.
qkster said:
The few methods that I've tried worked for me. Just simply flashing back to stock with a re-partition ( (Heimdall -1-click for me) usually brings back the /efs and imei without doing anything extra.
If you haven't, and if you can, I would try the heimdall-1-click a few times.
Click to expand...
Click to collapse
See that is what confuses me too. I have flashed back and forth several times at this point, and sometimes the /efs and imei do come back, but now they have never stayed. It is the only reason why I have tried to pretty much rule out a hardware issue. Even when I flash and there is no imei, there is the same /efs folder. And when I wipe the whole thing sparkling clean, even the newly formed /efs folder has the correct imei but it is just not being recognized on the phone.
qkster said:
If you want to use Odin, you may need to reinstall samsung drivers and use a different usb port on the PC than the one you used for heimdall.
Click to expand...
Click to collapse
Of course what I did was accidentally leave my phone home preventing me from testing it out with Odin on another machine. Its all good though.
qkster said:
You may also want to check the signal of the phone at your location. you may be getting poor signal and it has nothing to do with the phone's OS
Click to expand...
Click to collapse
I have an AT&T prepaid phone and the sim from the Infuse works in it flawlessly...
808

HELP with Soft Brick

So I have an old Infuse that my kids use and it went crazy the other day. Not sure what happened. Long story short I keep getting a boot loop at the ATT screen. This phone is not rooted and I'm not sure if it was on Froyo or GB. I've flashed every return from brick I can find on XDA. I'm using Odin and I'm pretty familiar with flashing/rooting etc. Can't figure this one out. The only thing I can think is the boot loaders are not the correct ones? Not sure, I keep seeing GTG's ultimate unbrick but all the links I get to it don't work. this is the only thing I haven't tried. Any help would be appreciated.
Edit to add: After I flash in Odin it goes to reboot then does the open update, verifying update, installing update, successfully installed update package.
Copying media files it says failed to mount/sdcard, can't mount /sdcard your storage not prepared yet please use UI menu for format and reboot. ??? I think that's the problem. How do I fix??
Just search in the stickies for bootloaders. That will solve your problems
Sent from my SGH-I997 using xda app-developers app
COfatboy said:
So I have an old Infuse that my kids use and it went crazy the other day. Not sure what happened. Long story short I keep getting a boot loop at the ATT screen. This phone is not rooted and I'm not sure if it was on Froyo or GB. I've flashed every return from brick I can find on XDA. I'm using Odin and I'm pretty familiar with flashing/rooting etc. Can't figure this one out. The only thing I can think is the boot loaders are not the correct ones? Not sure, I keep seeing GTG's ultimate unbrick but all the links I get to it don't work. this is the only thing I haven't tried. Any help would be appreciated.
Edit to add: After I flash in Odin it goes to reboot then does the open update, verifying update, installing update, successfully installed update package.
Copying media files it says failed to mount/sdcard, can't mount /sdcard your storage not prepared yet please use UI menu for format and reboot. ??? I think that's the problem. How do I fix??
Click to expand...
Click to collapse
If you'd like to try GTG's Ultimate Unbrick, you can find a working download here:
http://forum.xda-developers.com/showpost.php?p=22404446&postcount=391
Tried everything and no go. Not sure where to go from here. Sure seems like a hardware issue.
COfatboy said:
Tried everything and no go. Not sure where to go from here. Sure seems like a hardware issue.
Click to expand...
Click to collapse
You mentioned it's boot-looping at the Samsung logo - perhaps there's an issue with the power button.
Here's a couple of threads that may be helpful:
http://forum.xda-developers.com/showthread.php?t=2107558
http://forum.xda-developers.com/showthread.php?t=1996709
prairied0gg said:
You mentioned it's boot-looping at the Samsung logo - perhaps there's an issue with the power button.
Here's a couple of threads that may be helpful:
http://forum.xda-developers.com/showthread.php?t=2107558
http://forum.xda-developers.com/showthread.php?t=1996709
Click to expand...
Click to collapse
It goes past the Samsung logo screen then to the ATT Rethink Possible screen then keeps looping on that screen over and over. It charges normally also.
COfatboy said:
It goes past the Samsung logo screen then to the ATT Rethink Possible screen then keeps looping on that screen over and over. It charges normally also.
Click to expand...
Click to collapse
I would try flashing just a kernel (not the whole unbrick package). I have been in a similar situation and after trying everything imaginable that's what ended up fixing it for me.
Sent from my SGH-I997 using Tapatalk 2
prairied0gg said:
I would try flashing just a kernel (not the whole unbrick package). I have been in a similar situation and after trying everything imaginable that's what ended up fixing it for me.
Sent from my SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
Tried that earlier I thought, tried again just to make sure. Still no go. I appreciate all your help! :good: I'm gonna give up for tonight anyways.
COfatboy said:
Tried that earlier I thought, tried again just to make sure. Still no go. I appreciate all your help! :good: I'm gonna give up for tonight anyways.
Click to expand...
Click to collapse
This happened to me earlier. What I did was-
1 Went to full stock using heimdal one click, After completetion, U may stuck in bootloop in at&t as you said
2 Flash efs.zip found in the link below using odin. put efs.zip in odin and untouch any other setting and flash, (Ur imei may be previously corrupted so u got bootloop). This doesnot do any harm. So flash with confidence. If ur device doesnot show up in odin after u flash with heimdal one click , reinstal drivers with kies mini
Link for download http://forum.xda-developers.com/showthread.php?t=1729838
3 Now u'll be out of AT&T bootloop if ur imei was previously corrupted.
I was in similar situation. And this solved my proble.
Hit me thanks if I helped you :good:
Thanks for all the advise. Still not working. Tried everything above and much more. Different things I do give different results but pretty much the same in end. Either sticks in recovery or boot loops one way or another. Really don't see how this could be related to software but you never know I guess.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

[Q] First time rooting/S-Off/new ROM

Is there such thing as a guide like this one but that is up to date and with working links? I want to flash a new ROM onto my phone, but the guides I've found here and elsewhere have broken links, or use language that I don't understand, or skip vital steps. I've been working on this for four hours straight and I haven't gotten a single guide to work, or get stuck, or something else that's really dumb. For someone who has worked on computers for the last 17 years this is extremely frustrating. I'm very new to the android modding scene and apparently it's not just a community, but an entirely different culture and I'm feeling a bit shocked and confused. I have like 30 tabs open with guides, info, different ROMs, different ways to do it, etc and the more I learn the less I understand how to do this :/ I just want to get my phone working with a ROM that's very similar to stock Sense but without the crappy bloatware and memory issues. Miktouch is the one I thought I wanted, but apparently hasn't been updated in almost a year, and bulletproof/doubleshot is confusing. I can't even figure out how to root and get S-Of... Gah!
Please help.
This guide is confusing and skips steps or lacks real explanations.
Thank you.
First thing you want to do is root your phone, this is done by unlocking you bootloader through the HTC dev website. There is a tutorial that is stickyed in the developer section called something like root from any bootloader. I suggest to read that a bit.
Once you followed those steps and unlocked your bootloader you can decide if you want to remove all security flags (highly recommend this, but some find it difficult) in the same guide it explains what radio s-off is and links you to the jbear site to do the wire trick (needs Linux) (or find weekendstoshort for a way to do it in windows)
Feel free to ask more questions but all answers should be found in these xda threads and jbear site, no need to Google anything for this
Sent from my Nexus 4 using xda premium
I hope so...I'll give it another go tomorrow. I'm still quite frustrated at it. I wish I knew someone who had done it and could show me in person.
GiftigDegen said:
I hope so...I'll give it another go tomorrow. I'm still quite frustrated at it. I wish I knew someone who had done it and could show me in person.
Click to expand...
Click to collapse
MikTouch is optimized stock... So updating it farther would take it a direction we wasn't going with it.
Bulletproof is even older. We don't have much here... But what's here is solid
Sent from my Nexus 4 using Tapatalk 4 Beta
First timer here as well (although long time computer user/programming familiar so I might have a better understanding of some things than you) and I was able to fully unlock, S-OFF, and load up a JB rom to my phone using the guide right on this site (http://forum.xda-developers.com/showthread.php?t=1801106) and some help from some online friends that have done this kind of thing before. I found all links to be working, and pretty much all steps to be covered. The I guess hardest part was the permanent S-OFF using the wire trick. I had to burn an Ubuntu live cd and boot a laptop with it, but I was even able to get that step done. A little frustrating with the timing, I think it took me about 8 tries until it finally unlocked. The only thing I think I initially missed was wiping all 3 caches, so I did a dirty flash that got stuck on the boot screen. After I wiped and loaded again, no problems. If you'd like any additional help, I get pretty bored at work, so find me on aim or gchat, or just shoot me a PM here, I think I should get notified
Good luck, it's not as bad as I thought it would be
Also I haven't personally tried it, but feel free to peruse this thread as well: http://forum.xda-developers.com/showthread.php?t=1696373
Note you'll need to have already achieved HTCDev unlocked and be rooted to use this (covered in that first link)
Hope that helps!
PsychoPhreak said:
First timer here as well (although long time computer user/programming familiar so I might have a better understanding of some things than you) and I was able to fully unlock, S-OFF, and load up a JB rom to my phone using the guide right on this site (http://forum.xda-developers.com/showthread.php?t=1801106) and some help from some online friends that have done this kind of thing before. I found all links to be working, and pretty much all steps to be covered. The I guess hardest part was the permanent S-OFF using the wire trick. I had to burn an Ubuntu live cd and boot a laptop with it, but I was even able to get that step done. A little frustrating with the timing, I think it took me about 8 tries until it finally unlocked. The only thing I think I initially missed was wiping all 3 caches, so I did a dirty flash that got stuck on the boot screen. After I wiped and loaded again, no problems. If you'd like any additional help, I get pretty bored at work, so find me on aim or gchat, or just shoot me a PM here, I think I should get notified
Good luck, it's not as bad as I thought it would be
Also I haven't personally tried it, but feel free to peruse this thread as well: http://forum.xda-developers.com/showthread.php?t=1696373
Note you'll need to have already achieved HTCDev unlocked and be rooted to use this (covered in that first link)
Hope that helps!
Click to expand...
Click to collapse
I'm following the first guide you linked. So far it's working I just flashed CWmod on and I loaded it according to the instructions in the guide "After fastboot finishes, disconnect your MT4GS, go into bootloader, and go to “RECOVERY.” You should now be in ClockworkMod Recovery 5.0.2.7. The first thing I would do in CWM Recovery is make a backup of your stock ROM for safe keeping. "
But I forgot to d/c my phone. It still loaded CWmod and I navigated to backup/restore and clicked it. Right now my phone has the clockwork logo in the middle but it didn't give me any prompts after selecting backup/restore. What's it doing? It's been doing this for like 5 minutes. Should I be worried that I forgot to d/c the cable and whatnot?
Thanks
GiftigDegen said:
I'm following the first guide you linked. So far it's working I just flashed CWmod on and I loaded it according to the instructions in the guide "After fastboot finishes, disconnect your MT4GS, go into bootloader, and go to “RECOVERY.” You should now be in ClockworkMod Recovery 5.0.2.7. The first thing I would do in CWM Recovery is make a backup of your stock ROM for safe keeping. "
But I forgot to d/c my phone. It still loaded CWmod and I navigated to backup/restore and clicked it. Right now my phone has the clockwork logo in the middle but it didn't give me any prompts after selecting backup/restore. What's it doing? It's been doing this for like 5 minutes. Should I be worried that I forgot to d/c the cable and whatnot?
Thanks
Click to expand...
Click to collapse
I wouldn't worry, and I'm not entirely sure what it's trying to do, perhaps the possibility of USB storage is throwing it off. At this point I'd say just try to disconnect it, pull the battery, and start back up into recovery, but without the USB attached this time. I imagine then you'll be fine and able to backup the stock image like they say for safe keeping.
One more dummy question (tech support for many years, always check the simple stuff first...) you do have SOME SD card in there right?
PsychoPhreak said:
I wouldn't worry, and I'm not entirely sure what it's trying to do, perhaps the possibility of USB storage is throwing it off. At this point I'd say just try to disconnect it, pull the battery, and start back up into recovery, but without the USB attached this time. I imagine then you'll be fine and able to backup the stock image like they say for safe keeping.
One more dummy question (tech support for many years, always check the simple stuff first...) you do have SOME SD card in there right?
Click to expand...
Click to collapse
Yeah, 32gb =)
booted into recovery, clicked on bacup/restore...still just showing the logo in the middle.
(PS any mods out there listening, I'd love to have that 5 minute restriction removed =D )
Okay, so the select button changes from power to the scroll pad once in recovery...good to know.
GiftigDegen said:
booted into recovery, clicked on bacup/restore...still just showing the logo in the middle.
(PS any mods out there listening, I'd love to have that 5 minute restriction removed =D )
Okay, so the select button changes from power to the scroll pad once in recovery...good to know.
Click to expand...
Click to collapse
NVMD....You got it now.
strapped365 said:
MikTouch is optimized stock... So updating it farther would take it a direction we wasn't going with it.
Bulletproof is even older. We don't have much here... But what's here is solid
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Using CWM to flash Miktouch now. Hopefully it works... =D
Just remember, if you are "S-On" you're going to need to fastboot flash boot boot.img after your ROM is thru flashing or you will hang up at the boot animation.
strapped365 said:
MikTouch is optimized stock... So updating it farther would take it a direction we wasn't going with it.
Bulletproof is even older. We don't have much here... But what's here is solid
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
K. First impressions:
When I restart the phone, the first thing it does is force stop Gmail and Youtube several times. Is this supposed to happen?
Also, I'm extremely impressed with the speed of the restart. It's at LEAST twice as fast as stock.
And, Genius button doesn't work even after installing the patch linked to on your website (universal.zip).
WeekendsR2Short said:
Just remember, if you are "S-On" you're going to need to fastboot flash boot boot.img after your ROM is thru flashing or you will hang up at the boot animation.
Click to expand...
Click to collapse
Thanks Weekends. I did that and it's installed, though I fastboot flash boot boot.img before I used CWM to flash the rom. Does that make a difference? Do you think doing it that way will fix the force close mentioned above?
If there's not a fix for the gmail/youtube force closes, is it possible to do bulletproof with s-on? Thoughts? I really want to stick as close to stock MT4GS but with as solid a system as possible.
Flashing boot image before ROM will overwrite kernel
Wipe all
Flash ROM
Flash boot
Reboot
Sent from my Nexus 4 using xda premium
demkantor said:
Flashing boot image before ROM will overwrite kernel
Wipe all
Flash ROM
Flash boot
Reboot
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Another noob question. How do I wipe all?
Also, when I use CWM to install Mikrom it atuo restarts and loads up. Then do I restart again and go fastboot the new kernal?
Thank you all for how much help you have given me.
At the end of the updater-script there must be a reboot command, but being this ROM is based of stock you may not need to flash the kernel anyway.
Best methods for wiping is one of bluex's superwipe scripts or with fastboot
fastboot erase system -w
But being you are s-on that command may fail.
But always do a wipe data/factory reset, wipe cache, and wipe dalvik in recovery.
It also good practice to make a nandroid of current ROM before you flash anything
Sent from my Nexus 4 using xda premium
demkantor said:
At the end of the updater-script there must be a reboot command, but being this ROM is based of stock you may not need to flash the kernel anyway.
Best methods for wiping is one of bluex's superwipe scripts or with fastboot
fastboot erase system -w
But being you are s-on that command may fail.
But always do a wipe data/factory reset, wipe cache, and wipe dalvik in recovery.
It also good practice to make a nandroid of current ROM before you flash anything
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Mmkay, working doing this now.
Quick question, hopefully someone can give me a link, but I'd love the install the depaginated app drawer, genius fix and menu wake up mods for this, but the links are broken (dev-host times out). Any help?
See weekends mirror thread
Sent from my Nexus 4 using xda premium

Categories

Resources