Related
I don't really know what happened actually...I was on quickwiz 1.0.3 for about a week and last night my battery drained off completely and the skyrocket shut itself off...after I charged it up this morning, I saw a series of force closes and I did see some interesting message about "system UDI" or something not being compatible...dont remember what it was exactly though...
after that, i thought the device was soft bricked and used k0nane's method of odin to revert it back....the odin said that it was successful and rebooted my device...but, my mobile is now stuck at the bootlogo(at&t rethink possible) and keeps running that boot animation over and over without booting up entirely...
Any suggestions on how to recover from this plz?
I saw that the counter was incremented...so returning this is an issue now...trying to order my jig for that...any help will be greatly appreciated
Did you revert back to stock recovery? If so have you tried flashing cwm recovery using Odin?
Sent from my SAMSUNG-SGH-I727 using xda premium
If you can get into cwm recovery try restoring a nandroid if you made one if not try flashing a rom but wipe data and cache first
Sent from my SAMSUNG-SGH-I727 using xda premium
LoGaN- said:
I don't really know what happened actually...I was on quickwiz 1.0.3 for about a week and last night my battery drained off completely and the skyrocket shut itself off...after I charged it up this morning, I saw a series of force closes and I did see some interesting message about "system UDI" or something not being compatible...dont remember what it was exactly though...
after that, i thought the device was soft bricked and used k0nane's method of odin to revert it back....the odin said that it was successful and rebooted my device...but, my mobile is now stuck at the bootlogo(at&t rethink possible) and keeps running that boot animation over and over without booting up entirely...
Any suggestions on how to recover from this plz?
I saw that the counter was incremented...so returning this is an issue now...trying to order my jig for that...any help will be greatly appreciated
Click to expand...
Click to collapse
you should go into stock recovery Which you have if you flashed Konanes stock file.....and wipe data. if that does not do the trick. i would try wiping data again....doing the stock one more time. i been in that exact same boat, as have others. this is what i did to get out. but others have had luck just flashing 3e recovery and wiping data 3 times, flash CMW via odin and restore a nandroid to get back up and running or staying at stock. its up to you.
hope this helps.
Thanks for the reply man...but I didnt really follow what u said back there ...odining back the tar that k0nane gave should return the unit back to stock-meaning i should have the stock recovery as well...but I dont know why my skyrocket didn't boot up the whole way
Lemme explain what I did initially with my device actually- After I got my skyrocket, I used copperhed's method to flash clockwork cwm thru odin and rooted the device..after that, I flashed the quickwiz 1.0.3 thru the clockwork recovery and the thing I mentioned before happened to me...nothing more, nothing less...after this force close thing I had initially on quickwiz, I tried restoring my previous nandoid backups and all of them stopped at the bootanimation looping...nothing booted the whole way up and yes, I wiped for each restore...with none of them working, I started the k0nane's odining
I actually got this all worked out somehow now and want to share this info as it might help someone who had the same issue...After flashing the k0nane's tar thru odin, I went into the 3e recover and tried a factory reset...it asked me for a password there and i typed in the wrong password a couple of times as i dont know what the right one is...after some wrong attempts, it formatted everything(/data, cache and even the sdcad) and voila...my skyrocket booted up fine...i didnt worry much to do this as I had nothing on my sdcard and also since i have nandroid's of all my previous ROM's
But I still wanna know why this all happened..
all this panic cost me about 30 bucks to order a jig faster thru EMS....and my counter is up by 2 as I odin'd the tar twice thinking it might work
Thanks for the reply man...just figured it out...
A similar thing happened to me once, i flashed cm7 then i flash da_g kernal. After that, my phone was stuck on cm7 logo. I went back to stock and i was stuck at the rethink possible logo. After that i restared my phone into the stock recovery mode and i wiped everything and i was able to get my phone back.
LoGaN- said:
Thanks for the reply man...just figured it out...
Click to expand...
Click to collapse
i think you made this harder than it was, i honestly STILL dont know WHY this happens. but alot of people have had it happen. some say its undervolting( but i never did any of that) others thinks its Da 'gs Kernel which you were on if you flashed QuickWiz and i had his running as well. some think its the CWM itself that that is causing this because it is not for advice.
Over the past week i have STOPPED using Da g's kernel and have not that happen again.
either way, i think you went into a panic, the steps i listed WILL work weather you flashed 3e with odin or Return to stock to get 3e with Odin and WIPE ALL DATA, and CACHE. im glad you got it going though. sorry you waisted your 30 bucks bruh.
thanks for ur concern bro...i just panicked coz i wanted a working phone asap and i thought of returning mine at the att store...so used the ems shipping for faster delivery of the jig...and minutes after I ordered it, I got it all working...u can see the heights of irony here ...nyway....am glad to see it happen atleast once as I will know what to do if this happens again...for the moment, am gonna stay away from the OC kernels...
Did the flash counter reset?
Sent from my SAMSUNG-SGH-I727 using XDA App
LoGaN- said:
After flashing the k0nane's tar thru odin, I went into the 3e recover and tried a factory reset...it asked me for a password there and i typed in the wrong password a couple of times as i dont know what the right one is.....
Click to expand...
Click to collapse
So.... is there some secret 3e factory reset password we need??
DoctorQMM said:
So.... is there some secret 3e factory reset password we need??
Click to expand...
Click to collapse
i have never seen this in 3e.....i would like to know how to get to that screen.
Yeah wtf? Ive never seen a password in any recovery post a picture of this please
hmn...i will try to see if i can do this on the weekend...my flash counter is already up by 2...what harm will it do for one more
if you want,you can follow my procedure and it will ask for it again...just odin the tar given by k0nan and go into the 3e recovery by holdin volume up+down and power on...do a wipe and it will ask for it...
and no, my flash counter didnt reset...have to wait for my jig and try resetting it
silver03wrx said:
Yeah wtf? Ive never seen a password in any recovery post a picture of this please
Click to expand...
Click to collapse
now my skyrocket back screen wont turn on, everytime i tried to get into download my computer pop up messege that cant not find QHSUSB_Dload, anyone can help me out?
So you phone wont so anything? No download mode and no recovery? If so order a usb jig
So I tried to flash two of the new Roms in the dev section and now I cant boot anything at all nor can I restore my old Rom through recovery. I get to the MD5 checking then it says MD5 mismatch and doesn't let me restore. Anyone have any ideas? My phone wont boot....
After the massive googling that took place after this post I decided to just ODIN this sucker back to stock. Stock restored, root added, and CWM working again in under 10 minutes. Gonna make another backup and try reflashing again
DarkKnight worked fine for me except for some known bugs... i could'nt get the Noble Series 8.0 or 8.1 to boot at all though weird just stay at the blaze 4g splash screen
dispozable said:
After the massive googling that took place after this post I decided to just ODIN this sucker back to stock. Stock restored, root added, and CWM working again in under 10 minutes. Gonna make another backup and try reflashing again
Click to expand...
Click to collapse
I'm not to familiar with odin, this is the first time i had to use it with my blaze. how do return back to stock from odin? i don't need to at the moment, just good knowledge to have, if i got stuck in same scenario as you.
trevor7428 said:
I'm not to familiar with odin, this is the first time i had to use it with my blaze. how do return back to stock from odin? i don't need to at the moment, just good knowledge to have, if i got stuck in same scenario as you.
Click to expand...
Click to collapse
Its the same procedure you use to root your device. Put the phone in download mode and plug in usb cable. But instead of selecting blaze-root-kernel.tar (the rooted kernel you used), you'll instead select SGH-T769-UVLB7-hitsquad.tar. I have not needed to restore my device yet, so I have no experience. Just knowledge from reading. So don't take me for granted!
Sleeps17 said:
Just restore back to stock firmware using Odin. You need to download a file called SGH-T769-UVLB7-hitsquad.tar and blaze.pit, load those up in Odin and unselect all options except Reboot. And carefully make sure Repartition is unchecked as well.
Click to expand...
Click to collapse
To return back to stock I used this link: http://forum.xda-developers.com/showthread.php?t=1591601
After that I used this link: http://forum.xda-developers.com/showthread.php?t=1591598
I'm sure it wasnt the roms (I tried flashing both) that caused it because I couldn't restore my backups either, though I still don't know what happened. Safe to say the restore to stock was very fast, and now I have no worries if I soft brick again.
First of all I apologize if this has been brought up before in other posts. I am in a mixture of frustration and panic right now because I tried upgrading to ICS on my Rogers SGS2 LTE, and it failed.
Using Kies, I followed the prompts, and for whatever reason it didn't finish. Now when I boot up the phone, it keeps telling me to use the recovery mode option in Kies. However, if I do try to use recovery mode, it always times out and tells me I may need to contact a Samsung service center. The computer has no problem communicating with the phone, AFAIK.
Basically, I'm here to ask what options I have. Currently, i'm trying to do this: http://forum.xda-developers.com/showthread.php?t=1342348 , but because the stock TAR is taking a long time to download, I'm asking if I have any other options. I would like to keep the data on my phone, but if I have to wipe it to return it to normal I'm willing to do that.
Please help.
Reboot and try again
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Are you rooted? Are you running the stock recovery that came on the phone? If your rooted and have apps that are froze or your running a modded recovery like cwm you must flash back to stock or kies will not ever work
Sent from my SAMSUNG-SGH-I727 using xda premium
I've tried rebooting the computer I was using, and I've also tried another computer with no luck. I got the latest Kies on the other computer, connected the phone with no problem, and tried recovery mode on THAT 2nd computer, but it didn't work because it didn't recognize my recovery code that the first computer gave me.
garydv2002 said:
Are you rooted? Are you running the stock recovery that came on the phone? If your rooted and have apps that are froze or your running a modded recovery like cwm you must flash back to stock or kies will not ever work
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I *think* I was rooted. I remember doing something a long time ago involving odin. I never installed Cyanogenmod or any other 3rd party roms.
I had Superuser under my apps, if that helps.
I wish I could reply sooner but this board is making me wait 5 mins between posts. Sorry. It's like I'm in the emergency room with a gunshot wound and I'm waiting for the doctor to finish his smoke break, then his coffee break, then washroom break, jesus
by CWM, I think you're asking about Clockwordmod? If so, yes, I had that on my phone. Does this mean I can't use the steps in this thread: http://forum.xda-developers.com/showthread.php?t=1342348 to fix my phone now? Or can I still proceed.
If you have superuser then most likely you are rooted and since you have clockworkmod especially then kies is not gonna update your phone. Your on Rodgers so you need to find the stock firmware and flash it. I'm on att or I could link you to one that would work. I got my stock firmware from Samsung website. Try going to sammobile and see if you can find the stock firmware for your phone. I'm sure since its Samsung they should have Rodgers firmware to. Download the stock firmware and flash it in Odin onto to your phone and then kies should work. If you can't find the stock firmware at sammobile then look for the stock firmware here on xda I'm sure someone on Rodgers has it....
Edit. The link up there to Odin back to stock should work. Just download the file and follow the steps in order and don't leave one out. There are no shortcuts when it comes to flashing a phone or it could be rendered useless for anything more than a paperweight. Konane is real good and would not lead anyone wrong....
Sent from my SAMSUNG-SGH-I727 using xda premium
Just flashed it via Kies, had to use ODIN by flashing stock, Odin wouldn't work till I rebooted my computer, then once Kies updated, I had had a error ( com.Android.phone stopped) but I cleared data and cache in 3e, then everything worked.
Sent from my SGH-I727R using xda premium
I just wanted to post a follow-up. I followed the steps from this thread: http://forum.xda-developers.com/showthread.php?t=1342348 and it fixed me phone. Best of all, I didn't lose anything.
I would still like to get ICS on my phone. I noticed on Sammobile's site that there is a firmware for 4.04 that was released recently. Would I somehow be able to use that, combined with Odin, to get ICS on my phone? In other words, follow all the steps in the aforementioned thread, except, use this newer firmware file? Sorry I realize this may sound like a dumb noob question, but I want to make sure I do things right.
Thanks for all the help btw.
bobbastard said:
I just wanted to post a follow-up. I followed the steps from this thread: http://forum.xda-developers.com/showthread.php?t=1342348 and it fixed me phone. Best of all, I didn't lose anything.
I would still like to get ICS on my phone. I noticed on Sammobile's site that there is a firmware for 4.04 that was released recently. Would I somehow be able to use that, combined with Odin, to get ICS on my phone? In other words, follow all the steps in the aforementioned thread, except, use this newer firmware file? Sorry I realize this may sound like a dumb noob question, but I want to make sure I do things right.
Thanks for all the help btw.
Click to expand...
Click to collapse
If you're back to stock and on Rogers, you should be able to update using Kies.
The thing is, when Odin fixed my phone, it didn't remove Superuser, so doesn't that mean my phone isn't stock anymore? I was expecting Odin to basically reset my phone back to factory settings, but it seems to have just reverted it back to before I tried updating to ICS with kies.
bobbastard said:
The thing is, when Odin fixed my phone, it didn't remove Superuser, so doesn't that mean my phone isn't stock anymore? I was expecting Odin to basically reset my phone back to factory settings, but it seems to have just reverted it back to before I tried updating to ICS with kies.
Click to expand...
Click to collapse
If you go into 3e or cwm if you still have it, you should be able to clear cache and data, so after that Kies should recognize it and start the download
Sent from my SGH-I727R using xda premium
denenatse said:
If you go into 3e or cwm if you still have it, you should be able to clear cache and data, so after that Kies should recognize it and start the download
Sent from my SGH-I727R using xda premium
Click to expand...
Click to collapse
I haven't used the stock 3e that much always just flash cwm but I would suggest that you do a factory data reset to from the recovery if 3e gives that option I've never used it so I'm not sure. But if you are still on cwm recovery kies will not ever update your phone until you put everything back stock. You must have just flashed the kernel only. Flashing just the kernel does not wipe anything you need to flash the stock firmware from sammobile in Odin and that will do a full wipe and restore everything to stock
Sent from my SAMSUNG-SGH-I727 using xda premium
Sorry but what is 3e? The only place i see cwm mentioned is under the rom manager app, but when i launch it rom manager says i don't have a rooted device and super user can't be found. Weird thing is i see super user as an app on my phone.
bobbastard said:
Sorry but what is 3e? The only place i see cwm mentioned is under the rom manager app, but when i launch it rom manager says i don't have a rooted device and super user can't be found. Weird thing is i see super user as an app on my phone.
Click to expand...
Click to collapse
Turn the phone off. Hold both volume up and volume down and hold the power button do not release the volume buttons yet. Pressing all 3 buttons when you first see the screen come on mine shows an att logo then release the power button only. The phone will then boot into either 3e stock recovery or cwm recovery
Sent from my SAMSUNG-SGH-I727 using xda premium
OK, I did what you said, and I see 3e and the option to wipe data/factory reset. So you're recommending I do this BEFORE i try to use Odin and the latest firmware for Sammobile?
Just out of curiosity, if I didn't do a reset before flashing using Odin, what would happen?
bobbastard said:
OK, I did what you said, and I see 3e and the option to wipe data/factory reset. So you're recommending I do this BEFORE i try to use Odin and the latest firmware for Sammobile?
Just out of curiosity, if I didn't do a reset before flashing using Odin, what would happen?
Click to expand...
Click to collapse
Yes. And if you don't it might not wipe everything. I suggest you do it before you flash it and again after...
Sent from my SAMSUNG-SGH-I727 using xda premium
read this to return to stock http://forum.xda-developers.com/showthread.php?t=1652398
this post is just a copy paste from another post i wrote to a n00b
read, read more, read the stickies, i read alot b4 i even attempted to flash, at least a few hundred posts and using the search button.
all problems and solutions have been posted, as u r a n00b all u have todo is invest time into reading alot of posts, because of ur post we all know u havent even bothered to read the stickies, espicially read the one w/n00b's in the title, thats y they r there. .
once u know what ur r doing and r stumped at a certain problem, believe me we can tell by how u post a question, post in the q&a forum
i have rooted my infuse 4g using odin using this thread http://forum.xda-developers.com/showthread.php?t=1613523. but after installing this my phone was okay, then after i took backup thru cwm, after that i installed rom of jellybean and after installing it my phone cant start, so i took battery out and again go to recovery mod and try to restore it but i m facing same problem, my phone not starting, even usb mount also not working,
i have format my infuse again and try to do it with odin again but it shows that
E: failed to mount/dbdata(file exist)
E: copy_dbdate_media:cant mount /dbdate
your storage not prepared yet, please use UI menu for format and reboot action.
media files copy failed.
please help me. i m worried about it coz just yesterday i bought it new. so please please help me.
i dont know what is UI menu also.
If you had read the OP, you can't go directly to JB, you have to be on ICS, then flash JB.
Which option did you use from that page? I've used "I997UCLB3-root.rar" many times. But sometimes it gets stuck and I have to pull the usb cable and start over.
So, use I997UCLB3-root.rar, to go back to stock GB. Then flash an ICS rom, reboot. Then flash a JB rom.
Truckerglenn said:
If you had read the OP, you can't go directly to JB, you have to be on ICS, then flash JB.
Which option did you use from that page? I've used "I997UCLB3-root.rar" many times. But sometimes it gets stuck and I have to pull the usb cable and start over.
So, use I997UCLB3-root.rar, to go back to stock GB. Then flash an ICS rom, reboot. Then flash a JB rom.
Click to expand...
Click to collapse
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only
huseniezzaz said:
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only
Click to expand...
Click to collapse
Flashing JB is a big leap. Some reading, specially when you are new, could have saved you the trouble. But well, now is time to learn the hard way.
Download any uclb3 back to stock pack, either Odin or heimdall. Put your phone in download mode:
1) take out battery and place it back.
2) while holding vol + & - , connect your phone with a usb cable already inserted into the Pc.
Once in download mode, see if your phone is detected by odin or heimdall. If not you may need to install the drivers.
When all is ready, hit start.
*you probably don't have GB bootloaders. That will cause rainbows in your recovery when flashing ics and jb. If you feel you cant live with them, you will need to flash them.*
To flash jellybean, 1st flash any ics rom following directions coming from GB in the OP. Once you have blue recovery, flash JB with the directions in the rom OP.
Sent from my sweet & buttery Infuse
huseniezzaz said:
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only
Click to expand...
Click to collapse
read this, should help
http://forum.xda-developers.com/showthread.php?t=1776129
This too
http://forum.xda-developers.com/showthread.php?t=1437548
Thank you thank you thank you
andros11 said:
Flashing JB is a big leap. Some reading, specially when you are new, could have saved you the trouble. But well, now is time to learn the hard way.
Download any uclb3 back to stock pack, either Odin or heimdall. Put your phone in download mode:
1) take out battery and place it back.
2) while holding vol + & - , connect your phone with a usb cable already inserted into the Pc.
Once in download mode, see if your phone is detected by odin or heimdall. If not you may need to install the drivers.
When all is ready, hit start.
*you probably don't have GB bootloaders. That will cause rainbows in your recovery when flashing ics and jb. If you feel you cant live with them, you will need to flash them.*
To flash jellybean, 1st flash any ics rom following directions coming from GB in the OP. Once you have blue recovery, flash JB with the directions in the rom OP.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.
huseniezzaz said:
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.
Click to expand...
Click to collapse
The first link I posted for you will walk you through it. Read all the instructions, re-read, look up anything you don't understand, and then follow the directions.
huseniezzaz said:
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.
Click to expand...
Click to collapse
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you hold the volume keys and power button to turn phone on and then release only the power button when the Samsung logo shows. When u get back to recovery, flash the same ROM a second time and then it will boot.
You will now have blue recovery so you can flash the jb ROM of choice by following the method in the OP for that ROM. Remember to pull out the external sdcard if you have one.
Also, as others have mentioned, you may not have GB bootloaders. To get them, go to the "ISET infuse everything thread" which is stickied in the dev section. You will find Odin and Heimdall packages which have the bootloaders there. Be very careful when installing bootloaders (test usb with a kernel or something less dangerous first) bc if it fails while trying to flash the bootloaders, it can hard brick your phone. And then thank bigjoe for putting together the ISET thread so all infuse users can find everything we need in one place.
Sent from my SGH-I997 using xda app-developers app
Thank you thank you thank you
benbos_06 said:
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you hold the volume keys and power button to turn phone on and then release only the power button when the Samsung logo shows. When u get back to recovery, flash the same ROM a second time and then it will boot.
You will now have blue recovery so you can flash the jb ROM of choice by following the method in the OP for that ROM. Remember to pull out the external sdcard if you have one.
Also, as others have mentioned, you may not have GB bootloaders. To get them, go to the "ISET infuse everything thread" which is stickied in the dev section. You will find Odin and Heimdall packages which have the bootloaders there. Be very careful when installing bootloaders (test usb with a kernel or something less dangerous first) bc if it fails while trying to flash the bootloaders, it can hard brick your phone. And then thank bigjoe for putting together the ISET thread so all infuse users can find everything we need in one place.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Thank you so much, i have flashed JB successfully and GAPPs also. thank you once again. i followed your method and its very easy. first CWM was red i flash JB and after that i pull battery and start CWM at that time it was Blue and i flashed, now its installed.
One more HAPPY INFUSE OWNER.
Is this forum group great, or what!!!!!!
benbos_06 said:
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you ...
Click to expand...
Click to collapse
I think if you don't know what "that" means...it means you have not read anything you probably need to read on this forum. and probably should not even be thinking about JB let alone trying to flash it.
No slight on you benbos_06, I thought it was funny reading uninformed posts about "rainbow colors" in their their recovery a few months ago...now it's almost kind of sad to see the uninformed trying to go JB...and needing double flash and 3 finger to recovery detailed in step by step instructions. Jeeze!!! That's a little scary.
Sent from a de-FUNKt Infuse
Smokestack360 said:
I think if you don't know what "that" means...it means you have not read anything you probably need to read on this forum. and probably should not even be thinking about JB let alone trying to flash it.
No slight on you benbos_06, I thought it was funny reading uninformed posts about "rainbow colors" in their their recovery a few months ago...now it's almost kind of sad to see the uninformed trying to go JB...and needing double flash and 3 finger to recovery detailed in step by step instructions. Jeeze!!! That's a little scary.
Sent from a de-FUNKt Infuse
Click to expand...
Click to collapse
+ 100... right on, Smoke !!
Hi, I've searched and can't find an answer. I've managed to root my Infuse and got Infinitum rom installed. It was working great until just this evening when Clockworkmod updated (sorry, I can't find the version number). It went into a boot loop. It took me a bit, but I managed to get it out of the boot loop and back to stock, now it's rooted again with Infinitum running again.
I'm trying to get back to a recovery point that I do have on the phone, but I can't get the phone to boot to recovery no matter what I do. When I try using the vol and power buttons combination or from ROM manager I get the same thing. It goes past the stock Samsung logo into the Galaxy S/Cyanogen(mod) logo, but freezes there.
I can, of course, take the loss of my setup and redo everything manually. I would really prefer to be able to get that backup back. I'm also concerned should I ever need to get into recovery mode for any other reason. My guess is that I need to downgrade the CWM version, but I haven't been able to find how to do it.
Can anyone give me any help? Please let me know if there's info that I can give that would be useful...I'm noobie, I know!
VyCariously said:
Hi, I've searched and can't find an answer. I've managed to root my Infuse and got Infinitum rom installed. It was working great until just this evening when Clockworkmod updated (sorry, I can't find the version number). It went into a boot loop. It took me a bit, but I managed to get it out of the boot loop and back to stock, now it's rooted again with Infinitum running again.
I'm trying to get back to a recovery point that I do have on the phone, but I can't get the phone to boot to recovery no matter what I do. When I try using the vol and power buttons combination or from ROM manager I get the same thing. It goes past the stock Samsung logo into the Galaxy S/Cyanogen(mod) logo, but freezes there.
I can, of course, take the loss of my setup and redo everything manually. I would really prefer to be able to get that backup back. I'm also concerned should I ever need to get into recovery mode for any other reason. My guess is that I need to downgrade the CWM version, but I haven't been able to find how to do it.
Can anyone give me any help? Please let me know if there's info that I can give that would be useful...I'm noobie, I know!
Click to expand...
Click to collapse
There are many layers to your questions.
You may need to read a bit more to get a better understanding.
Here is two points I can offer that may be helpful.
1. Don't use ROM Manager for the Infuse.
2. To downgrade a cwm version, you will need to flash a GB or FROYO kernel in download mode via heimdall or odin. You can also use any one of the return to stock that is flashed in download mode also.
If you think you lost recovery, try flashing the kernel for the rom you were running in cwm, if you can get back into cwm again.
qkster said:
There are many layers to your questions.
You may need to read a bit more to get a better understanding.
Here is two points I can offer that may be helpful.
1. Don't use ROM Manager for the Infuse.
2. To downgrade a cwm version, you will need to flash a GB or FROYO kernel in download mode via heimdall or odin. You can also use any one of the return to stock that is flashed in download mode also.
If you think you lost recovery, try flashing the kernel for the rom you were running in cwm, if you can get back into cwm again.
Click to expand...
Click to collapse
I believe you about the ROM Manager. Too late, unfortunately. I'll take it off.
I had the phone back to stock with Odin. I went through all of the steps that I went through to first root it and install Infinitum. I had red cwm at the time. I just can't seem to get into it now. I don't think I lost it, I'm just unsure of how to get to it, since it freezes at the cm startup. I can just power off from there after I give up waiting, and it will boot to ICS normally when I power it on normally. I have Titanium Backup Pro, and it can access the nandroid backup that I have to get the apps and data. I was just hoping to recover the whole setup. I had an issue last weekend (oops to me) when I tried to install a JB rom where it went into a boot loop. I recovered everything after backtracking like I did tonight, and was hoping to be able to do the same. Is there any hope, do you think, if I go back and return to stock and start over from the beginning again? If not, I'll just suffer and redo the whole thing.
By the way, I really appreciate you answering. I've been lurking for a few weeks, and realize that you know a LOT about these phones.
VyCariously said:
I believe you about the ROM Manager. Too late, unfortunately. I'll take it off.
I had the phone back to stock with Odin. I went through all of the steps that I went through to first root it and install Infinitum. I had red cwm at the time. I just can't seem to get into it now. I don't think I lost it, I'm just unsure of how to get to it, since it freezes at the cm startup. I can just power off from there after I give up waiting, and it will boot to ICS normally when I power it on normally. I have Titanium Backup Pro, and it can access the nandroid backup that I have to get the apps and data. I was just hoping to recover the whole setup. I had an issue last weekend (oops to me) when I tried to install a JB rom where it went into a boot loop. I recovered everything after backtracking like I did tonight, and was hoping to be able to do the same. Is there any hope, do you think, if I go back and return to stock and start over from the beginning again? If not, I'll just suffer and redo the whole thing.
By the way, I really appreciate you answering. I've been lurking for a few weeks, and realize that you know a LOT about these phones.
Click to expand...
Click to collapse
Okay, so next question. I've been reading and searching and reading some more. I can get the phone back to stock and work up again, but I still reach a point where it will freeze on the Samsung/CM startup screen. In reading the Infinitum Project thread, I found this (yes, it's pretty easy to find):
"Recovery/CWM messed up?
Here is how to fix it...
1) Download uclb3 heimdal by qkster
2) open the program
3) put phone in download mode
4) click flash (leave program open when finished DO NOT CLOSE)
5) after it finishes and your phone reboots, put the phone back in download mode and reconnect to PC
6) click flash bootloader on the heimdal program you left running
7) flash, let reboot and your recovery problems should be gone"
I used that to get back to stock before...doesn't that remove the root? Do I have to go through all that, then the bootloaders, and then go back and root all over again to get back to a working CWM? I'm sorry to ask so many questions, but it seems that I've done most of this already, though I admit to not doing the flash for the bootloader. I'm just unclear since it says "your recovery problems should be gone" at the end of that, like I have to do nothing more.
That does remove root access. However, root isn't really necessary, at least for the stock ROM, if you have no intentions of staying stock. The ROM .zips you'll subsequently flash are pre-rooted. After you Heimdall back to stock, and flash it again with "flash bootloaders" selected, then use Heimdall to flash this kernel:
http://d-h.st/6KA
That'll flash both a new kernel and CWM Red recovery. It'll take a few minutes to boot up the first time, as it's installing the lagfix. Once it boots up, just shut it down and boot back up in recovery. From there, you can do whatever you need to do.
VyCariously said:
Okay, so next question. I've been reading and searching and reading some more. I can get the phone back to stock and work up again, but I still reach a point where it will freeze on the Samsung/CM startup screen. In reading the Infinitum Project thread, I found this (yes, it's pretty easy to find):
"Recovery/CWM messed up?
Here is how to fix it...
1) Download uclb3 heimdal by qkster
2) open the program
3) put phone in download mode
4) click flash (leave program open when finished DO NOT CLOSE)
5) after it finishes and your phone reboots, put the phone back in download mode and reconnect to PC
6) click flash bootloader on the heimdal program you left running
7) flash, let reboot and your recovery problems should be gone"
I used that to get back to stock before...doesn't that remove the root? Do I have to go through all that, then the bootloaders, and then go back and root all over again to get back to a working CWM? I'm sorry to ask so many questions, but it seems that I've done most of this already, though I admit to not doing the flash for the bootloader. I'm just unclear since it says "your recovery problems should be gone" at the end of that, like I have to do nothing more.
Click to expand...
Click to collapse
As Apex pointed out, each time we bring the phone back to stock, we lose root access and all the previous setup. It's a fact of flashing.
No big deal though, rooting is easy and is not really needed. What is needed is the insecure kernel with cwm. The link Apex gave you is the same as the posted kernel in post #2 of the thread. That kernel will give you the cwm. Review that thread if you haven't yet.
Flash the heimdall uclb3 repartition package. Immediately after it successfully boot your phone, don't close the program. check the bootloader box and put the phone back into dl mode and flash it again to get your gb bootloaders...
then flash the kernel.
review my how to thread if you need to.
Andros11 also made a how to for JB if you want to live vicariously.
gl
qkster said:
Andros11 also made a how to for JB if you want to live vicariously.
gl
Click to expand...
Click to collapse
Thanks guys
It's been a crazy busy week and I just didn't have time to deal with the phone. I've been dealing with stock gingerbread. It's getting kind of annoying, though, it seems less stable than the custom ICS that I had on it before. Not sure when I'm going to have time to play with it again and try to get it to where I want it. I think I'm going to try to totally wipe all of the old stuff out of the memory before I do it again, though. There's something that wasn't allowing me to do what you guys are telling me to do successfully. I'm also thinking of finding a GS2 and just selling the Infuse, not because of my confusion, but because the GS2 was what I was originally looking for anyway.
I'll try to get this one set up first, though, as it's just a matter of me being obsessive about it.
qkster, I'll look into the JB, too, lol.
qkster said:
As Apex pointed out, each time we bring the phone back to stock, we lose root access and all the previous setup. It's a fact of flashing.
No big deal though, rooting is easy and is not really needed. What is needed is the insecure kernel with cwm. The link Apex gave you is the same as the posted kernel in post #2 of the thread. That kernel will give you the cwm. Review that thread if you haven't yet.
Flash the heimdall uclb3 repartition package. Immediately after it successfully boot your phone, don't close the program. check the bootloader box and put the phone back into dl mode and flash it again to get your gb bootloaders...
then flash the kernel.
review my how to thread if you need to.
Andros11 also made a how to for JB if you want to live vicariously.
gl
Click to expand...
Click to collapse
Hey I am not the Infuse user... But I faced similar problem in my xperia some days back after updating the recovery.
I was also not able to enter recovery at boot time using my usual volume down way...
What the change was the new recovery checks for tap on the screen (repeatetive) instead of volume down button...
Not sure if it will work or not for you... But you can give a try...
Hit thanks if it works
Sent from my MT11i using xda app-developers app
XperiaNeoVNoob said:
Hey I am not the Infuse user... But I faced similar problem in my xperia some days back after updating the recovery.
I was also not able to enter recovery at boot time using my usual volume down way...
What the change was the new recovery checks for tap on the screen (repeatetive) instead of volume down button...
Not sure if it will work or not for you... But you can give a try...
Hit thanks if it works
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
I didn't get a chance to try it, sorry! I ended up wiping my phone totally back to stock Gingerbread with nothing on the sd card, either, and starting all over again. It seems to be working really well this time (fingers crossed). RemICS-UX is pretty much awesome
VyCariously said:
I didn't get a chance to try it, sorry! I ended up wiping my phone totally back to stock Gingerbread with nothing on the sd card, either, and starting all over again. It seems to be working really well this time (fingers crossed). RemICS-UX is pretty much awesome
Click to expand...
Click to collapse
No probs...
:thumbup:
Sent from my MT11i using xda app-developers app