Related
Hello,
I did an ICS OTA update for my Atrix 2 here in India. After that I tried the mentioned root mechanism as given in the DEV section. (I was root in 2.3.6). To my utter dismay I found that adb cannot detect the device. I tried reinstalling latest Moto drivers umpteen number of times with no avail. I came across a thread which says factory reset is the only way to get it detected by adb. What a pain!
Does anyone have any other work around for this? Will be grateful for any help.
Thanks,
Sayantan
USB debugging selected?
Sent from my SAMSUNG-SGH-I747 Anti-Motorola Ballistic Missile
Usb debugging is on..
(And tried all possible combinations- install drivers with usb debugging selected, deselected, machine reboot and the lot.)
~
Sayantan
Sent from my MB865 using xda app-developers app
Are the right moto drivers installed? If you type "adb devices" what does it say?
You need to update your drivers. If that doesn't get it immediately, reboot your pc and you'll be good to go.
I installed the latest drivers, thrice, from the link here that gives the root method in ics. (and rebooted too). Did not work. Adb devices says "no devices found".
Sent from my MB865 using xda app-developers app
Also I tried on two separate laptops, one with win 7 64 bit another on winxp 32 bit. Got the same result.
Please help me out.
Sent from my MB865 using xda app-developers app
Try another usb cable.
See http://forum.xda-developers.com/showthread.php?t=1784689
The phone requires a factory reset. Without that it wasn't identifying itself as ADB interface.
Had to do a factory reset finally. Damn! Got adb working and rooted. Anyone tested the overclocking thing in ics? Working fine?
Sent from my MB865 using xda app-developers app
Can someone help pls, after i factory reset my infinity (Rooted with CleanRom) i can't connect my infinty to computer anymore.
I found out that i lost my root, cwm .......is there a way to able to root my tab? I have try everthing on the XDA forum no luck yet.
Yofinity said:
Can someone help pls, after i factory reset my infinity (Rooted with CleanRom) i can't connect my infinty to computer anymore.
I found out that i lost my root, cwm .......is there a way to able to root my tab? I have try everthing on the XDA forum no luck yet.
Click to expand...
Click to collapse
I dont entirely understand your question. I am guessing you have CleanRom installed? Then how did you lose your root? Did Super User become uninstalled? If so it can be installed from the play store. Under your ASUS customized settings and Developer settings make sure nothing is marked to disable the usb to pc.
Tylor
Sent from my ASUS Transformer TF700T Infinity Pad Using Tapatalk HD
Rom: CleanRom Inheritance 3.4.7 Odex AND That's UltraCleanRom(7 sec boot )
Kernal: _That's Stock V6 Kernal
Theme: Timberwolf's Blues & Jazz Theme V2.1
UPDATE FOR TF700 USERS!!! AND THE 4.2.1 UPDATE http://forum.xda-developers.com/showthread.php?t=2204100
Yofinity said:
Can someone help pls, after i factory reset my infinity (Rooted with CleanRom) i can't connect my infinty to computer anymore.
I found out that i lost my root, cwm .......is there a way to able to root my tab? I have try everthing on the XDA forum no luck yet.
Click to expand...
Click to collapse
CleanRom is a pre-rooted rom, so you just reflash cleanrom and you should have root back.
Dear Taylor i rooted and have install cleanrom on my tab. But then i did a factory reset,after that i got no more root even the CWR is gone.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
That is my problem i cant reflash because i dont have the CWR on it and my pc dont connect to my tab so i cant even root it again. i got everything backup on titanium but you need root to use it.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Yofinity said:
Dear Taylor i rooted and have install cleanrom on my tab. But then i did a factory reset,after that i got no more root even the CWR is gone.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Click to expand...
Click to collapse
If you did indeed have CleanRom then it should not have wiped out the root not should it had wiped your recovery. So my question is what did you flash because flashing CleanRom will not touch your recovery. And CleanRom does not have to be rooted, it is already rooted so it sounds like to me your flashed the stock rom. So IDK what is going on because flashing/wiping Cromi does not touch recovery not take away root.
Tylor
Sent from my ASUS Transformer TF700T Infinity Pad Using Tapatalk HD
Rom: CleanRom Inheritance 3.4.7 Odex AND That's UltraCleanRom(7 sec boot )
Kernal: _That's Stock V6 Kernal
Theme: Timberwolf's Blues & Jazz Theme V2.1
UPDATE FOR TF700 USERS!!! AND THE 4.2.1 UPDATE http://forum.xda-developers.com/showthread.php?t=2204100
As long as your bootloader is still unlocked, you can use fastboot to flash CWM and then whatever ROM you want.
For CWM touch, see this thread: http://forum.xda-developers.com/showthread.php?t=1926286
Yofinity said:
Can someone help pls, after i factory reset my infinity (Rooted with CleanRom) i can't connect my infinty to computer anymore.
I found out that i lost my root, cwm .......is there a way to able to root my tab? I have try everthing on the XDA forum no luck yet.
Click to expand...
Click to collapse
Are speaking of the latest CROMi or CleanROM the older version?
Sounds like a system wipe vs. factory reset.
I'd ADB push TWRP and reinstall the ROM.
What exactly is the tablet doing when you hook it up to the pc? Are there any sounds like the pc is recognizing the device is connected or say a usb device is attached? Does the tablet say it is connected to the usb of the computer? Can you charge the tablet fine using the wall plug and cord? I've had the pins on the port fry and it became useless to any computer it connected with. Worked fine for charging via the plug. Asus had to replace the port on the tablet under warranty. Give the developers trying to help a bit more info as it may not be software but a hardware issue.
I got the CleanRom 3.3 install.
When i hook up the TAB on my pc nothing happens. Charging the tab is ok not a problem. I dont think the port is fry because i try to hook up my old phone to my pc Samsung galaxy GT-I9000 with android version 4.2.2 and my pc is not recognizing this one. Maybe is the USB drivers from my pc? It run on windows 7..... i will try to hook up to another pc tonight its run on windows XP maybe that wil help.
i wanna thanks you guys form all the help till now........:good:
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
cromi 3.3
Thats OK said:
Are speaking of the latest CROMi or CleanROM the older version?
Sounds like a system wipe vs. factory reset.
I'd ADB push TWRP and reinstall the ROM.
Click to expand...
Click to collapse
Well i have try on another pc no luck, i was running the CleanRom 3.3 went this happens after i factory reset my tab.
I think you are right Thats OK about system wipe vs factory reset :crying: Is there a way to restore with Titanium? I got a back up on that but i cant use it because of the root.
Yofinity said:
Well I have tried on another PC no luck.
I was running CleanRom 3.3 went this happened after I factory reset my tab.
I think you are right Thats OK about system wipe vs factory reset :crying:
Is there a way to restore with Titanium?
I got a back up on that but I cant use it because of no root.
Click to expand...
Click to collapse
Edit:
I see you lost your recovery also.
Edit 2:
Plug the tablet in
Go to Device manager on the Win7 PC
See if the "Asus ADB device" is evident in the list of devices
If it is there double click to get the dialog box then uninstall the driver
Restart the PC
Thats OK said:
Edit:
I see you lost your recovery also.
Edit 2:
Plug the tablet in
Go to Device manager on the Win7 PC
See if the "Asus ADB device" is evident in the list of devices
If it is there double click to get the dialog box then uninstall the driver
Restart the PC
Click to expand...
Click to collapse
I already try to find the "Asus ADB device" in the list of devices. My pc doesn't recognize my tab via USB hub.
Yofinity said:
I already try to find the "Asus ADB device" in the list of devices.
My PC doesn't recognize my tab via USB hub.
Click to expand...
Click to collapse
Hmmm...
Don't know where to go from here.
By your explanations you may be looking at a hardware problem.
Very hard to tell with information provided.
Does your PC see any other USB devices when connected directly to the PC (not through an external hub)?
Yofinity said:
I already try to find the "Asus ADB device" in the list of devices. My pc doesn't recognize my tab via USB hub.
Click to expand...
Click to collapse
Did you check to see if you have USB debugging enabled?
Download the tool from here http://forum.xda-developers.com/showthread.php?t=2094746, then make sure you go into settings and enable USB debugging (located in settings -> developer options), plug in the usb cable, then run the tool to push TWRP to your device (not recommend CWM, this tool create problem). See if the tool see your device. Please try both Win7 and XP.
buhohitr said:
Did you check to see if you have USB debugging enabled?
Download the tool from here http://forum.xda-developers.com/showthread.php?t=2094746, then make sure you go into settings and enable USB debugging (located in settings -> developer options), plug in the usb cable, then run the tool to push TWRP to your device (not recommend CWM, this tool create problem). See if the tool see your device. Please try both Win7 and XP.
Click to expand...
Click to collapse
I did everthing "USB debugging" and install unknow sources on. Still no ADB mode on my pc maybe on APX mode to flash?
Yofinity said:
I did everthing "USB debugging" and install unknow sources on. Still no ADB mode on my pc maybe on APX mode to flash?
Click to expand...
Click to collapse
tell us how to run adb on your pc and screen shot please. I believe you're not doing the right thing.
I'm having a similar issue, only difference is I've done nothing and suddenly USB connection stopped working. I can charge normally and when I try to connect TF700 to my PC, nothing happens. Not even some "Ding-Dong" sound like most of the time you connect some USB devices on it, and absolutely no error, no ADB and other things are shown on Device Manager. I'm thinking it's most likely my cable or my port is broken. I've ordered a new cable yesterday, hope it's gonna be that easy.
Hm... For me this happens when I kill wudfhost.exe in processes on my pc... Which is the driver it uses to recognise the connection to android devices.
Check taskmanager to see if it's there. If not, there you (might) have it. It should be in c:/windows/system32.
Send from my Samsung Galaxy S3 using Tapatalk 2
buhohitr said:
tell us how to run adb on your pc and screen shot please. I believe you're not doing the right thing.
Click to expand...
Click to collapse
If i press and hold power and volume down until you get the option:
RCK - Andriod - wipe data
up left says: The Device is UnLocked.
Android cardhu-user bootloader <1.00 e> released by "ww_epad-10.6.1.14-20130329" A03
Starting Fastboot USB download Protocol
When i go to RCK device says:
The Device is UnLocked.
Android cardhu-user bootloader <1.00 e> released by "ww_epad-10.6.1.14-20130329" A03
Starting Fastboot USB download Protocol
Booting recovery kernel image
Then i will get the android error see the pic.
Everthing is working fine i just cant get to recovery or root my tab. I even manual updated my tab from 4.1.1 to 4.2.1 still the same problem.
No recovery and no fastboot.
Hi all,
I just made a replace of Motherboard cuz before one briked.
Now with 4.2.1 Stock and fine with stock recovery, but.... i connect PC ( tried on differents 3 pcs), the Computer don´t reconize TF300t, without success, don´t work ADB, Fastboot, Asus sync , nothing.:crying:
I only need to Root, are there any way without PC and without TWRP recovery?
Thanks for help
Have you installed the tf300t drivers? Download asus sync
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
ebildude123 said:
Have you installed the tf300t drivers? Download asus sync
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
Yeah, installed and everything with differente computer. It´s unknown devices... Before to change Motherboard a least i can enter to APX mode, now can´t but table working by own.
Some days ago i flashed CROMI-x 5.2.2 on my ASUS tf300tg... after some days i tried to transfer some files to my tab via USB data cable from my PC,,,, but my pc did not detect anything even no pop up in windows device manager, next day i bought new data cable but still same issue.. even though i have tried on several Pcs,, win 7/xp everything but nothing to see... My tab is as new ... Charging is perfect so there is nothing wrong with the USB port. All sorts of Asus drivers i have tried but still no luck.....today i managed to factory reset but still the same problem.....now root and TWRP both gone :crying:.......Any solution please
jaffer707 said:
Some days ago i flashed CROMI-x 5.2.2 on my ASUS tf300tg... after some days i tried to transfer some files to my tab via USB data cable from my PC,,,, but my pc did not detect anything even no pop up in windows device manager, next day i bought new data cable but still same issue.. even though i have tried on several Pcs,, win 7/xp everything but nothing to see... My tab is as new ... Charging is perfect so there is nothing wrong with the USB port. All sorts of Asus drivers i have tried but still no luck.....today i managed to factory reset but still the same problem.....now root and TWRP both gone :crying:.......Any solution please
Click to expand...
Click to collapse
It sounds like it's a windows driver issue mate. Remove the asus drivers and install the naked drivers found on xda. I think they are up to version 0.73 now.
Also CROMi-X 5.2.2 is old. Please upgrade to 5.3 once you get the drivers sorted.
Well Dear,, I have tried this too, but still no progress ,, As i have described that my pc does not show any popup while attaching the USB, even nothing comes in Device manager,,, neither in Bootloader.
Honestly I am eager to Flash your CROMi-X 5.3 but i got the hurdle of this USB mess,,Before it was CROMi-X 5.2.2 in my ASUS tab...
If it is not the cable and you are sure that you installed the right USB drivers, it could be your PC USB port or (worst case) your tablet.
I am afraid you have to keep trying: use another USB port in your PC, use another PC, ...
Sent from my TF300T using XDA Premium HD app
Linux
Go get Linux and all your problems will melt away...:silly:
lj50036 said:
Go get Linux and all your problems will melt away...:silly:
Click to expand...
Click to collapse
Also true for linux on VirtualBox. Once, I successfully flashed recovery with virtualboxed xubuntu 13.10 on Windows 7 while Windows have no drivers for tablet.
let me try this...
Will i have tried in linux on different platform....but still the same...no luck....
However,,,one developer told me to flashing kernel may solve this problem...well i am on Stock Rom ww 10.6.2.11... and i have downloaded 10.6.2.11 KERNEL .....now any one can explain how to flash it with usb Support????
jaffer707 said:
However,,,one developer told me to flashing kernel may solve this problem...well i am on Stock Rom ww 10.6.2.11... and i have downloaded 10.6.2.11 KERNEL .....now any one can explain how to flash it with usb Support????
Click to expand...
Click to collapse
You can't flash the kernel like that. That is the source code. Either use my kernel flasher from the CROMi-X thread post 2 to change kernels or you'll have to flash the Asus stock firmware. It includes the kernel blob which will get flashed at the time.
IMO it is unlikely flashing the kernel will fix your issue but you can try it and find out yourself It's much more likely to be your PC.
sbdags said:
You can't flash the kernel like that. That is the source code. Either use my kernel flasher from the CROMi-X thread post 2 to change kernels or you'll have to flash the Asus stock firmware. It includes the kernel blob which will get flashed at the time.
IMO it is unlikely flashing the kernel will fix your issue but you can try it and find out yourself It's much more likely to be your PC.
Click to expand...
Click to collapse
As far as your roms are concerned,,,,i found them Best!!!!! comparing other Customized Roms for TF300TG....absolutely bug free.. and lots of good things....Installation Wizard is tremendous!!!!!!!!!!!!!!!!! :good:...
Regarding my issue it is clear now, that Stock rom does not need separate Kernels.
Now i want to get rid out of this USB problem.....As far my ability is concerned,,, you may call me "developing developer",, As couple months ago i unbricked one of my friend's TF300, through fastboot commands ( erase commands) in few seconds ,, That TF300 was stuck on boot logo...due to wrong firmware flashing....Even the Asus service center here in Pakistan quoted him for motherboard replacement. later on i flashed exact firmware,, Recovery, Root and then your CROMI-X rom and CROMI-X colour theme.....:good:
Just now i plugged his tab with "my" cable on "my" pc.....it detected in seconds
why not mine:crying:
jaffer707 said:
As far as your roms are concerned,,,,i found them Best!!!!! comparing other Customized Roms for TF300TG....absolutely bug free.. and lots of good things....Installation Wizard is tremendous!!!!!!!!!!!!!!!!! :good:...
Regarding my issue it is clear now, that Stock rom does not need separate Kernels.
Now i want to get rid out of this USB problem.....As far my ability is concerned,,, you may call me "developing developer",, As couple months ago i unbricked one of my friend's TF300, through fastboot commands ( erase commands) in few seconds ,, That TF300 was stuck on boot logo...due to wrong firmware flashing....Even the Asus service center here in Pakistan quoted him for motherboard replacement. later on i flashed exact firmware,, Recovery, Root and then your CROMI-X rom and CROMI-X colour theme.....:good:
Just now i plugged his tab with "my" cable on "my" pc.....it detected in seconds
why not mine:crying:
Click to expand...
Click to collapse
Don't know - very odd. What are you running on your tab currently?
sbdags said:
Don't know - very odd. What are you running on your tab currently?
Click to expand...
Click to collapse
Well.....Latest JB stock rom in on my Tab,,,bootloader is unlocked...charging ,,,apps,,,everything is perfect except USB:crying:
Well I heard in Q&A forum that motochopper can root over WIFI!!!!!!!!!!!!!!!!!!!!
will it be possible.???????????
if yes then what will be the method????
Can you explain me in details,,,how to do it over wifi....though i have tried it before but not get through
My Desktop pc is cabled with adsl WIFI modem and my ASUS TF300Tg is on WIFI on same modem.
it happened like that :
[*]
[*] Motochopper: Android root exploit (Windows version)
[*] v1.0
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Tested on the Motorola Razr HD, Razr M, Razr Maxx HD, and Atrix HD.
[*] Supports lots of other devices as well.
[*]
[*] Before continuing, ensure that USB debugging is enabled, that you
[*] have the latest USB drivers installed, and that your phone
[*] is connected via USB.
[*]
[*] WARNING: This will likely void the warranty on your device. I am
[*] not responsible for any damage to your phone as a result using this
[*] tool.
[*]
[*] Press enter to root your phone...
DNS name does not exist.
[*]
[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
that's it......
First you have to enable TCP mode for ADB on your tablet in developer options ("ADB over network"). It is a big security risk, if you are not in your own WLAN, so it is disabled by default. Will also automatically be disabled on next reboot.
Then you need to connect the daemon on your PC:
adb tcpip YOUR_TABLET_IP
Once the adb daemon is connected, try running motochopper. It should work, though I never tried myself.
Sent from my TF300T using Tapatalk
I could'nt find "TCP mode for ADB" on TF300TG settings in developer options... where it is???
jaffer707 said:
I could'nt find "TCP mode for ADB" on TF300TG settings in developer options... where it is???
Click to expand...
Click to collapse
Settings > System > Developer options > Debugging > ADB over network
Sent from my TF300T using Tapatalk
f69m said:
Settings > System > Developer options > Debugging > ADB over network
Sent from my TF300T using Tapatalk
Click to expand...
Click to collapse
This facility is only on Rooted Device:crying:
jaffer707 said:
This facility is only on Rooted Device:crying:
Click to expand...
Click to collapse
Oops, sorry, didn't know that.
Sent from my TF300T using Tapatalk
Hi,
It would seem that I have inadvertantly bricked my TF101 during the process of trying to root, and install TWRP in order to put on KatKiss. I used Baidu Root to root which appeared to have completed successfully and then tried using CWM (I now know about the incompatibility issues concerning CWM and the TF101) to install the rom. Now, in its current state, the TF101 does not turn on at all. I have tried many guides but the problem I am having which I attribute to the many unsuccessful attempts is that for example, using EasyFlasher, the APX device would disconnect itself. I have tried to restore the device by reflashing the stock rom (WW) using both SBKv1 (wheelie crashes during the process every time, and then the device would disconnect), and SBKv2 (after clicking OK on the APX prompt box, the device disconnects). I have also tried using nvflash and Prime without any success. My device is a B70, and was running Android 3.2 (Honeycomb?).
Please let me know if there is any more clarification or information required that I have missed out on.
Thank you all in advanced for any help or suggestions,
- Tone