My Samsung Infuse is stuck in a loop. - General Questions and Answers

Good evening everyone. I was running a custom mod for some time now. Everything was working well, until about 1 month ago.My phone would randomly turn off, and get stuck in a loop. All of a sudden as I was trading currency pairs from my phone. It looped again and has not been able to turn back on. So I searched the threads, and decide to change the custom mod to see if it would work (serendipity). In which I loaded to my sd card, ran from CWM, and it would get stuck on the samsung logo screen.
I then found this link. http://forum.xda-developers.com/showthread.php?t=1524081&page=27 which seemed promising. I have downloaded the file recommended, but I can't get into DOWNLOAD mode, because I keep getting stuck on the samsung screen. The only thing I can do is boot into CWM. So once I am there, what do I do? Where do I need to load the "Stock_SGH_I997_UCLB3_Repartition-One-Click" program as it isn't a ZIP file. Any help would be greatly appreciated.
Thanks in Advance,
Alex

Related

[Q] Troubleshooting Samsung Epic after Froyo install

Hey there. I'm new to this forum, and I need help! I updated my Samsung Epic to 2.2 today without a hitch. Following online instructions, I downloaded the 2.2 software, copied it onto the SD card in the phone, entered recovery mode and loaded the update.zip file. The phone rebooted and everything's fine. Then, I took my girlfriend's Epic and did the same thing. But, when the installation appeared to be done, and the phone restarted, it didn't restart. Instead, I goes back to the recovery mode and I can't get it to do anything else. I've removed the battery, turned it back on, but it just goes to that screen. I don't know much about this, but it seems like it can't find the system software. Any ideas? Thanks in advance for your help!

I need of serious help. Galaxy Tab GT-P3113 stuck in boot loop!

Ok so I have tried on another thread that kind of went dry mainly cause I was MIA....but now I am back and have done some more reading up and think it is safe to say rooting and trying customer ROM's is not for me...lol I pretty much messed up a new Galaxy Tab 2 7' brand new only after a few weeks trying to root it. I had another thread link below:
http://forum.xda-developers.com/showthread.php?t=1834368&page=2
But I did not get anything to work right. At this point I am really just looking to get the tablet working. I don't really care what firmware rooted or unrooted...i just want to be able to use it....do some more research and and maybe join the rooting community again when I get a Galaxy S3.
I'd appreciate any help. I am pretty stuck right now!
Go into Download mode "power" plus "down volume", then up volume. Use ODIN to load this:
http://forum.xda-developers.com/showthread.php?t=1645295
ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=581913...
You will need driver from Samsung Keis install for P3113
http://www.samsung.com/us/support/owners/product/GT-P3113TSYXAR
FYI - I needed to load CMOC10-Kernel to get my tab to stop boot looping when I flashed JB AOKP
bark777 said:
Go into Download mode "power" plus "down volume", then up volume. Use ODIN to load this:
http://forum.xda-developers.com/showthread.php?t=1645295
ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=581913...
You will need driver from Samsung Keis install for P3113
http://www.samsung.com/us/support/owners/product/GT-P3113TSYXAR
FYI - I needed to load CMOC10-Kernel to get my tab to stop boot looping when I flashed JB AOKP
Click to expand...
Click to collapse
Worked like a charm....you made it simple! Thanks!
Continous boot loop on tab 2 p3113
My problems are kind of different from all the others I have read. Yes it is similar that it boot loops. But mine freezes at different areas in boot mode. This is driving me crazy and I am spending way too much time and effort trying to fix it. Hopefully you can help.
I don't really know for sure if the android os was 4.1.1 or 4.1.2 or some other rom but it did state in download mode that it was original and not custom rom.
I received this tab from ebay and it is new never used, but somehow whoever had it probably tried to flash it and now I received it with a continuous loop. They stated that it stuck in SAMSUNG logo. I found it true but it also stuck other places as well. I did do a reset first before I attempted to flash it.
I did the Odin flashing.I found the 4.2.2 xar file HOME_XAR_P3113UEUCMK3_1978026_REV04_user_low_ship.tar.md5 and did according to instructions. But that didn't work. It did boot into android but it didn't stay there very long and rebooted itself. I couldn't stay more than 20-30 seconds and it would reboot itself or freeze at various places in android. I also hard reset it. Still same thing. It would also freeze on the first samsung logo tab 2 screen and also at the blue circle with samsung logo. It was different every time. I would have to hold down the on button until it rebooted. It also stalls or freezes during Android upgrading... Optimizing app at various number stages sometimes it goes thru that and then to the next phase of installing apps then it freezes again. I cannot get it to work if I try to upgrade via wireless upgrade to samsung. it will freeze even before it downloads the upgrade file.
I then flashed back to the original xar file P3113UECLK7_P3113XACCLK7_XAC which is 4.1.1 That worked a little better, but it freezes and also the sound chatters when it freezes on bootup you know, when the samsung sound comes on then the blue circle.
Finally I tried to recover or flash from the recovery mode using the upgrade from a sdcard. using the original 4.1.1 xar file. It hewlped a little but still doing the continuous boot loop at different stages but it gets to the Android is upgrading... more often. It freezes always now.
So I don't know what else to do. You mentioned a CMOC10-Kernel to load, how does one go about doing that and what are the steps.
Thanks in return if you can suggest things.
Wayne

[SOLVED] Rogers I727R stuck on bootanimation

Sorry everyone... I tried one more time (my 5th attempt!) and it worked this time! I have no idea what happened with the earlier attempts. Thanks
Hello everyone. I'm having a problem with a Rogers Skyrocket here and hope someone can help. It was running a custom ROM, but I was given the task of returning it to stock. I don't recall which ROM was on it, but it worked nicely. I should have just kept it that way!
Thanks to vincom's super helpful posts, I got the info & file(s) needed to get this thing back to stock. I installed Odin 1.85, and extracted
I727RUXLF3_I727RRWCLF3_I727RUXLF3_HOME.tar.md5
from the zip. I started by doing a wipe/factory reset (from inside the custom rom) first, and rebooted to see that it showed the initial setup screen. Then pulled battery and booted the phone into ODIN mode. I made sure to kill Kies completely before connecting the phone to my laptop (WinXP). Then launched Odin, hit the PDA button, loaded up the above file, left the check-boxes as they were, and flashed. It was successful, and rebooted the phone.
The rogers logo appears, and the samsung galaxy bootanimation comes up, and it continues to animate.... forever (for the record, I waited 20 minutes, more than enough time). I can pull the battery and try to boot again but it still stays on the bootanimation. I'm not sure what else to do? I can still get into stock recovery or Odin mode. Can anyone help? Thanks

[Q] stuck in bootloop! please help! can only boot to download

Hi guys...thanks for taking a minute to help me out.
I have been using the Cyanogenmod Nightlies for a few months, and have recently been experiencing a few random quirks since upgrading to the new version of Android. I decided that I'd do a full wipe and then install the new nightly. Everything worked fine, the phone booted, I could use apps, etc. Then, I decided to restore some of my apps and data from Titanium Backup.
It took about 40 minutes, and then finally got stuck on 98% which was "android data" or "system data" or something like that...i checked back a few minutes later and the phone was completely dead/frozen. I eventually pulled the battery and rebooted the phone, and now it's just stuck in a bootloop.
When I try to boot into recovery, it freezes on the "Samsung Galaxy S3" screen for a while, and then turns off. However, i CAN boot into download mode.
Can someone please point me in the right direction here? I know that android 4.2.2 reworks some of the system folders, making reverting back to a previous version difficult..? I don't know what to do. Really, I just need to be able to get into recovery, but I'm too ignorant to figure it out.
Thanks so much for taking the time to help me, it's very much appreciated!
hold tight, guys! for some reason, it booted into recovery after like the 50th try. hopefully i can figure it out from here! thanks

Help! Sero 7 Pro Won't Boot

I've poked around the forum and not found what I need...so I'll venture a new thread.
Here's the deal. The other day after being at work all day, I came home and unlocked my tablet. A bunch of errors popped up right away about the launcher crashing and a few other things. I powered it down and turned it back on...and that's as far as I got. Every time I try to boot it gets stuck on the boot logo. I was able to boot into ClockworkMod Recovery mode and flashed xboxexpert's custom rom...but still no luck. The stupid thing won't boot and I'm out of ideas. Any help would be much appreciated. Thanks in advance!
Anybody got anything on this?

Categories

Resources