Database Info

[Q] Recovery mode huawei U8180 ?

Please i need to know how can i to put huawei U8180 to the recovery mode?
and I would like for anybody to help me with one tutorial whitch i can Flashing a ROM with FUSIONideos 2.7
thank you

I thinks it haven't a recovery mode (((((((((((((((

sorry for my bad english + i am new to android
you can install stock roms with sd card androidz.jimdo.com/full-reset-install-stock-roms/#.TmuVbFtHqmk
rooting with SuperOneClick and fastboot were working, pleace dont try to flash any type of U8150 firmware! i brick my ideos x1, and dont found any way to reflash (fastboot working partional but android adb dont recognising the phone) + no functional clockwork recovering image!
=> without android knowledge its to easy to brick the ideos x1

reboot recovery ideos x1
If the phone is working you can reboot in recovery mode by executing on the pc:
adb reboot recovery
(on the windows pc you have to install android sdk, enable usb debugging on phone, connect phone to pc and go to folder C:\Program Files\Android\android-sdk\platform-tools)
If the phone is not working...I have no idea, I'm also looking for the key combination

the combination of keys is... press the power button and the volume up button at the same time

Ascend G6- Need Original boot.img For G6-U10

need original boot.img for g6-u10
hey
i was working on boot.img for add TWRP 2.7 Recovery
after i flashed boot.img from here
How to Install TWRP 2.7 Recovery:
TWRP 2.7 works only with the Android 4.4.2 KitKat powered Huawei Ascend P6.
You must have installed Android ADB & Fastboot drivers on your PC. Get the Fastboot folder using the guide.
Once done with the ADB and Fastboot installation, download TWRP 2.7 Recovery.img file.
Rename the downloaded file to boot.img.
Enable USB debugging mode on your Huawei Ascend P6 and connect it to your PC.
Now open the Fastboot folder that you created using our ADB & Fastboot guide.
Press and hold the shift key and then right click on an empty area inside the Fastboot folder, now click on “Open Command Window Here”.
Now in command prompt type “adb reboot bootloader”.
It should reboot your phone into the bootloader mode, now push this command in command window
“fastboot flash boot boot.img”
This will quickly flash the TWRP 2.7 recovery in your device.
Once done, reboot your device.
Boot into recovery by pressing Volume Up or Down Key as soon as you see the Red LED while booting up your phone.
You should see the TWRP recovery interface now.
That’s all with the recovery installation on the Huawei Ascend P6. In case you got any queries or your facing any problems regarding this post, feel free to stop by the comment box below and reach us. Thanks all.
Click to expand...
Click to collapse
phone wont start only fastboot mode
please help me guys to reinstall system again

finally i install cwm on my phone from other topic here
but now only 2 screen 1 the cwm and 2 screen for fastboot mode
now i need to reinstall system like it come from huawei then i try again to install cwm again or it just install once
sorry guys this frist time to edit huawei phones and i try before with samsung and it so easy with it not like huawei phone
im now download G6-U10_V100R001C900B146CUSTC408D004_Firmware_Algeria_Egypt_Jordan_Sudan_Tunisia_Channel-Others_4.3 JB_EMUI 2.0 Lite_05012HLX.zip
from huawei site to try install it
so guys this way to install G6-U10_V100R001C900B146CUSTC408D004_Firmware_Algeria_Egypt_Jordan_Sudan_Tunisia_Channel-Others_4.3 JB_EMUI 2.0 Lite_05012HLX.zip from cwm is corruct or need download another file to reinstall system?
hope guys help me fast becuze this frist time with huawei phones

any help guys

any help to rest my phone?

you can't install original firmware from cwm, you have to proceed with the included instruction (in zip)

can u give me the firmware to download and flash it
need help guys

Huawei g6 u10
Mount cache fail
Mount data fail
Help us solve this issue please....
---------- Post added at 07:27 PM ---------- Previous post was at 07:04 PM ----------
Need zip files or scatterfile to flash via sp flashtool..
Is it possible to flash p6 rom on g6 via sp flashtool???
Please help us solve this issue.....

Blu Studio M Hd is the same as Gionee P5w Here General tips, Bootloader + Root TWRP

I DONT OWN THE PHONE ANYMORE AND I CANT HELP ANYONE ELSE ANYMORE, IM SORRY...DISCONTINUED!
So here we are:
Big thanks to Hovatek Enigma who was the first person ever to help me!
Also big thanks to AMD developers, Matrix guys very very friendly !! ( i ported lots of roms that they developed)
First:
1) Blu Studio M Hd is just a rebranded Gionee P5W, the stock gionee rom works fine without porting need via SP flashtools
2) blu Studio M Hd is on lollipop and Gionee is on Marshmallow, you can use gionee marshmallow on it!
Second:
To install Twrp on blu studio M Hd and gionee P5w you need to follow these steps:
1) Download and install minimal adb and its drivers:
( I dont own the video, if you have any questions please use search on xda forum, the process is very similar to all other mediatek devices)
Video: https://www.youtube.com/watch?v=d04ZwTbstI4
2) Enable Developer mode and do enable "oem unlock" on it
3) with it enabled do insert usb cable and do open adb minimal and type: adb reboot bootloader ( it will reboot into fastboot mode)
4) Here you do type fastboot oem unlock , it will ask you on the phone if you do really want to unlock it, then say yes pressing vol up
5) Your phone is now unlocked, to check it please type fastboot getvar all and it will show unlocked yes
6) do type fastboot reboot and your phone will reboot and enter into bootloop ( this is normal, now remove the battery)
7) Please do download and open Sp flash tools and " download only" the stock rom! it will reinstall the system and now you ll be unlocked and ready to flash twrp and custom roms. ( Remember, to flash blu phones you have to plug in usb without battery and then when it starts you insert battery again)
8) You can find stock firmware here: http://firmwarefile.com/gionee-p5w You can use it on both phones.
9) If you re using blu studio M Hd you ill find out that after the flash it stands on boot animation for a long time, dont worry the first boot will take more than 10 minutes just wait it
10) Now that you re back into the system, do the same process with adb and do enter into bootloader mode by typing: adb reboot bootloader
11) Now you can just flash twrp, just copy twrp files into the minimal adb folder and type: fastboot flash recovery recovery.img
12) it will suceed, now you can just boot into twrp by typing fastboot boot recovery.img
Now you re ready to flash any custom rom you want! You can also install super SU after flashing custom roms !
Hope it helps ! You can download twrp here: https://forum.xda-developers.com/android/development/twrp-3-0-2-gionee-p5w-walton-primo-gh5-t3432166
Next post will be about custom roms !

But when the device boots in fast boot mode ,my pc failed to recognise it and thus the whole process stops by saying that
''Waiting for device"

ajay6828 said:
But when the device boots in fast boot mode ,my pc failed to recognise it and thus the whole process stops by saying that
''Waiting for device"
Click to expand...
Click to collapse
Use this, it worked for me.http://androidmtk.com/download-gionee-usb-drivers

I get the same problem as ajay. I installed the android gadget VCOM driver from the link you provided.

SUPERETDUPER said:
I get the same problem as ajay. I installed the android gadget VCOM driver from the link you provided.
Click to expand...
Click to collapse
I have solved the problem. You can flash any custom recovery without unlocking the bootloader.all you need to do is to download the stock ROM which is android lollipop and flash it using SP flash tools because marshmallow stock ROM does not root easily in my case. so when. You have flash android lollipop ROM you should root it with kingoroot app and then flash twrp recovery using rashr.then you can flash the twrp and custom ROM without unlocking the bootloader..
Hit thanks if it worked
It worked in mine case and I had flashed rr ROM easily (worked fine)
Thanks...

ajay6828 said:
I have solved the problem. You can flash any custom recovery without unlocking the bootloader.all you need to do is to download the stock ROM which is android lollipop and flash it using SP flash tools because marshmallow stock ROM does not root easily in my case. so when. You have flash android lollipop ROM you should root it with kingoroot app and then flash twrp recovery using rashr.then you can flash the twrp and custom ROM without unlocking the bootloader..
Hit thanks if it worked
It worked in mine case and I had flashed rr ROM easily (worked fine)
Thanks...
Click to expand...
Click to collapse
Where did you get the lollipop stock ROM for Gionee P5w

Can anyone please port any nougat rom for gionee p5w.

does flashing stock rom via sp flash tool lock the bootloader.

Help with Mate 8 L29-C185-B580

Hello,
I tried to root my mate 8 nxt-L29c185b580
first I unlocked bootloader and install twrp recovery but happen an errors during flashing superSu and the root not work properly. I tried to return to stock but not work I tried B580 and B321 but not work on dload mode also the eRcovery not work, after that I relocked the bootloader but the device now is stacked with the boot and eRecovery apper without work , also I can not open the bootloader because I cannot access the product id from the dialpad
I need the stock firmware or any thing make the phone work please help
thanks

to fastboot
reboot phone, and power + volume down hold
if not connect usb and try it again
then unlock bootloader
twrp
wipe partitions,
you can install throght twrp
for flashing you can try this manual:
https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c432b560-official-t3540042
if you want B321 i think, you need to downgrade EMUI 5 (with rollback)
or you can try flash B580
- you can try srk tools for unbrick

Ok

nordscan said:
to fastboot
reboot phone, and power + volume down hold
if not connect usb and try it again
then unlock bootloader
twrp
wipe partitions,
you can install throght twrp
for flashing you can try this manual:
https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c432b560-official-t3540042
if you want B321 i think, you need to downgrade EMUI 5 (with rollback)
or you can try flash B580
- you can try srk tools for unbrick
Click to expand...
Click to collapse
Thanks for your reply
But I can not open the bootloader again from huawei website because I only have imei and sn but not product id (the phone stacked on eRecovery)
Do you have any way to retrieve product id via fastboot?
Which firmware you prefer to flash ?
Thanks

I found this method can any one explain how to do that in details
Also I need stock firmwares c185b580 and c185b560 where can i found them?
The method is
Hard methods, Flashing with fastboot
Download Tools and driver :
ADB-Fasboot-tools.zip –>*Download Here
ADB-Fastboot-Driver –>*Download Here
Huawei Firmware Extractor tool .rar –>*Download Here
1. Downloader rom (UPDATE.APP) put in Huawei Rom Extractor folder.
2. After you puted “UPDATE.APP in folder you first run “split_updata” and it will create “output” folder with extracted files(It script will not work without ActivePerl installed on your computer.)
3. After “split_updata” finished you need to run “HuaweiFinder” script and it will compile “system.img” and “boot.img”, you need cut or copy “boot.img”(18mgb) and “system.img”(1gb img file) in fastboot folder.
4. Reboot your device into bootloader(holding Vol- and power button)
5. Now follow this guides ->*How To Unbrick / Update Firmware Any Android Devices Via Fastboot Mode

ok_free2ooo said:
I found this method can any one explain how to do that in details
Also I need stock firmwares c185b580 and c185b560 where can i found them?
The method is
Hard methods, Flashing with fastboot
Download Tools and driver :
ADB-Fasboot-tools.zip –>*Download Here
ADB-Fastboot-Driver –>*Download Here
Huawei Firmware Extractor tool .rar –>*Download Here
1. Downloader rom (UPDATE.APP) put in Huawei Rom Extractor folder.
2. After you puted “UPDATE.APP in folder you first run “split_updata” and it will create “output” folder with extracted files(It script will not work without ActivePerl installed on your computer.)
3. After “split_updata” finished you need to run “HuaweiFinder” script and it will compile “system.img” and “boot.img”, you need cut or copy “boot.img”(18mgb) and “system.img”(1gb img file) in fastboot folder.
4. Reboot your device into bootloader(holding Vol- and power button)
5. Now follow this guides ->*How To Unbrick / Update Firmware Any Android Devices Via Fastboot Mode
Click to expand...
Click to collapse
How many of you are havkng mate 8 getting volte in india

Canadian Mediapad T5 AGS2-LO3 root available?

is there a Canadian Mediapad T5 AGS2-LO3 root available?
i have 14 days to return it if i cant root it..
thankyou for any info.

nutpants said:
is there a Canadian Mediapad T5 AGS2-LO3 root available?
i have 14 days to return it if i cant root it..
thankyou for any info.
Click to expand...
Click to collapse
If you unlock the boot loader following this (https://forum.xda-developers.com/mediapad-t5/how-to/how-to-unlock-bootloader-t4141705) you can then flash TWRP (Download the huawei p20 lite version), after you have twrp you should be able to flash magisk which will give you root access.

FlyingEwok said:
If you unlock the boot loader following this (https://forum.xda-developers.com/mediapad-t5/how-to/how-to-unlock-bootloader-t4141705) you can then flash TWRP (Download the huawei p20 lite version), after you have twrp you should be able to flash magisk which will give you root access.
Click to expand...
Click to collapse
everything worked great EXCEPT
now every time i connect the tablet to the windows computer it will not enable mtp to see the tablets storage.
i cant turn debugging off ( i dont think it should matter but its greyed out "on")
the windows computer never finds the internal or external storage which is a little frustrating.
i switch to usb for file transfer and nothing happens ( windows makes a few usb devices found sounds for on and off)
i am able to switch usb debugging off in linux and linux will find the tablet storage.
any help?
just an update i tried systemless xposed and now im only booting to twrp..
anyone know how to restore to factory?
i cannot adb to bootloader it just goes back to recovery
i can get to fastboot through the oem hisuite software... ill see how that goes when i have more time