Related
I've not got my XDAII yet.....but curious to know whether this setup works, i.e. XDAII installed with MS Voice Command and wearing the Bluetooth headset - do the voice commands work ok through the headset down to the XDAII or do the commands have to be spoken to the XDAII directly ? Also, is it necessary to have to push a button on the XDAII before you speak to it - or does it listen all the time ?
Thanks for your help,
Nutz
Voice Command doesn't work with a Bluetooth headset.
You need to press a button on the XDA2 to invoke VC and make it accept a command. This must be because it's so sophisticated that if it listened all the time, it would a) run your battery down, and b) hear commands that you didn't intend.
but even....
so, there is no way to make my XDA II work as my old SonyEricsson T610 (on SE T610 - when I perss button on headset and say voice command into it and than it repeats me that command for check and running it...) - no way to achieve even half of this on XDA II ?
( )
I understand it can be done using the supplied wired headphone, but no, not with bt headset. Too bad!
is this the same as voice dialing ?
my bluetooth headset manual says to press the button and speak the command to dial the contact
this is a Sony-Erricsson HBH-35
surely some software somewhere for the XDAII would support this ?
Hi everyone,
My car has a bluetooth chip inside, but it only works when someone calls me or when I call someone. The BT chip of my car is recognized by my phone as an "headphone device" or something like that.
So I would like to find an app which fakes that the phone is receiving a call or that I'm calling someone so that I can listen to my music using BT.
Obviously, all that app such as call faker don't do the trick because they are just a sort of skin which is absolutely not faking a call the way I mean it.
Do you know that kind of app or any method to do so ?
Thanks,
KennyG9
i know what you mean, but there is no way that could happen sorry . (no app exist to date as far as i know)
you need what is called a a2dp bluetooth car set. that will let you stream music. (i have one)
other than that i'm afraid your out of luck.
but you could try buying the IO Bluetooth car kit (the one i have)
works well!
Oh, that's a shame .
Anyway, I'm going to take a look a bit more about A2DP, but I guess that I will not have enough motivation to buy one (and continue listening to music with my ooooold CD Player \o/ ).
So thanks for your answer Oly,
If someone else can help me in any other way, I stay tuned on this topic, even if it seems to be difficult.
KennyG9
Perhaps this would be possible if someone writes an app which uses the "phone line" not sure how it is called and how I should describe it in english.
But if you make an app which has a sound output you can tell it the type like navigation, music, call...
I am not sure if that does it, but someone could try?
Perhaps I could write a small app which plays one song to the call channel fit test purposes?
I have no headset or anything similar.
Sent from my HTC Desire S using XDA App
Tasker to the rescue! Just tried the following profile in Tasker, and it worked how you want:
New task: Prank
Call my home number (+ auto dial)
Wait 5 seconds
End call
I then create a tasker widget, and point it to this profile. Now when ever I press this widget, it dials my home number for 5 seconds then hangs up.
Tasker ain't free, or easy to get used to, but it's incredibly powerful. I think it has a trial period. Check it out.
Sent from my HTC Desire S using XDA Premium App
Thanks for answer wnp, but I don't really understand in which way it's supposed to help me, because Tasker is really calling someone and really ending the call. Anyway, I tried it and it didn't worked because when Tasker is launching the call, the BT headphone of the car activates (ok), it rings, and end the call (stopping BT headphone in the car) 5 seconds later. It works exactly as if I had really done it with my hand. Or maybe I didn't understood well what you explained ?
Thanks anyway,
KennyG9
I'm looking for this as well!
Try AutomateIt or Llama. AI has a bluetooth trigger option, eg start an app (music) and it will trigger bluetooth and you can set bluetooth to default connect to a specific source.
al89nut said:
Try AutomateIt or Llama. AI has a bluetooth trigger option, eg start an app (music) and it will trigger bluetooth and you can set bluetooth to default connect to a specific source.
Click to expand...
Click to collapse
Ok I downloaded automateit but how would I set this up with my car stereo Bluetooth? As the same with the OP in the 1st post, I don't have a streaming option, but I can make calls, and it is only while i'm on a call i'm able to play and hear other audio sources such as Pandora, mp3, etc on my phone. How can I fake a call, so that I trigger the Bluetooth to activate with this app?
I'm just sayin!
You can use an app called BTmono in the market for this. It can stream all audio from your device to your car reciever. But the streaming is only in mono because your car's bluetooth works like a mono headset.
Sent from my HTC Desire S
Ok I appreciate the help offered but the suggestions is not suitable for the problem. The problem that we're having is that the car audio headset don't have an option to stream audio from a Bluetooth device, but will allow calls thru Bluetooth.....if I have a connected call from my phone to my car audio headset, only then is when I can stream other audio formats from my phone, but once the call is disconnected, then I went be able to. So once again, are there any apps that can fake a call to initiate the Bluetooth as an incoming call so that I can stream audio from my phone??
I'm just sayin!
I also have a Jabra headset and can only stream audio when there is a call. It should be working as same. As I said, BTmono can stream all audio on the connected bluetooth device. Have you tried it first?
Sent from my HTC Desire S
newrad67 said:
I also have a Jabra headset and can only stream audio when there is a call. It should be working as same. As I said, BTmono can stream all audio on the connected bluetooth device. Have you tried it first?
Sent from my HTC Desire S
Click to expand...
Click to collapse
Yes I did try btmono, but I didn't see anything within the app that would allow to fake a call. Unless i'm overlooking. Maybe you can instruct how?
I'm just sayin!
[Post found via google]
Sip applications such as sipdroid do change phone state. and SIPDROID is a SOFTWARE-ONLY SOLUTION. we just need a software that would make a dummy call...
I have an app called Call Reminder and when it triggers I know the phone is actually on a call state
I'v personally tried btmono and the other one and both failed for me. [not desire though].
On my windows Mobile phone for this i use an app that routes all audio output to Bluetooth
So I can hear music on my headset
The app is bt audio
Don't know if there is an equal app for Android
Sent from my HTC Desire S using XDA
BTMono or Fake call
I've been digging the internet for a similar solution and stumbled upon a few pages.
BTmono or any of the myriad of other applications should work from what i read. It simply routes the music audio stream to headset/headphone audio (the one that's used for a call) which is compatible with a mono-bluetooth headset or in your case the non-A2DP car bluetooth. This is essentially what you suggested, by placing a fake call.
playstore - play.google.com/store/apps/details?id=com.bedoig.BTmono
The other more interesting option (i like to avoid having an app if the task can be done simply otherwise) is to call the 2 second pause function from the dialer. There's a thread about this over at this other forum. It describes the 2 second pause as a double star **. However i figured in my Nexus 4 the 2 second pause is simply a comma (,).
forum link - androidforums.com/motorola-droid/16849-audio-other-than-calls-bluetooth-headset.html#post122894
I haven't tried either as I left my mono-bluetooth at work today. Will try both out tomorrow and post my results. Both seem like plausible solutions.
Btmono seems the only one to have worked.
Sent from my SGH-T999 using Tapatalk 2
Steam music over Bluetooth for phone only setups
I've solved this problem but you need two phones. Connect a phone to Bluetooth in your car, use another phone to call you, answer the call and on the other phone press hold. You can now stream music on any of the apps on the Bluetooth phone until you hang up the call. I found this out when someone left me on hold for a period of time. Using Tidal high fidelity the sound is amazing in my 2006 Range Rover
Hi all,
I have got the One S now for some weeks and I'm really satisfied. But I got one problem using my handset handsfree via bluetooth. I can take an incoming call via clicking the BT headset, but I can do anything via clicking it when the device is in standby. Though I can react, but not act. I have got the experience from my old HTC Desire when I click on the BT headset, that the voice search starts or I got the possibility to choose an application.
I already called the HTC support, but they were not very nice and said, that they can only support HTC accessoires. But I can not believe that I want to use accessoires from third party manufacturers.
So where is the problem? Is it a HTC problem? Is it related to Android 4.0 or is it related to a few amount of compatible BT headsets?
Already tested with Sennheiser EZX 60 and Jabra EasyGo.
Thanks in advance.
Ok, let's keep it simple. To all One S users with a Bluetooth headset:
What happens if you push the button on your BT headset?
When I bought Gear 2 Neo a week and a half ago, I immediately faced the following issue: how the hell I keep using my Bluetooth earpiece for conducting phone calls? As cool as it looks talking to the Gear, it's not as convenient as wearing an earpiece, and I've been using those for the last 12 years. This new annoyance combined with an old one: when I'm in the car, I want my phone to automatically switch to the car in-built Bluetooth audio, both for phone calls and for media. I don't want to do this manually! And now, with the Gear, just think of the possibility of talking to the watch while driving the car!
Now, the Samsung phone owners have the luxury of being able to switch to the earpiece after picking up the call on the Gear. Not ideal, but workable. Still puzzles me though if you're able to choose a specific Bluetooth phone audio device if you have more than one (e.g. as with the earpiece and the car example). But we, the non-Samsung owners, don't even have this option. So finding a solution was due!
So, here are my use cases:
When I'm not in the car, I'd like the phone to be connected to the Gear all the time while not in the call. This makes sure I get all the notifications etc.
When not in the car and I'm engaged in a call, I'd like Bluetooth phone audio to switch to my earpiece as soon as possible. This automatically disconnects the Gear, meaning I'm no longer able to receive notifications on it. But this is not an issue, as, when I'm on the phone, I prefer not to be distracted anyway. At the end of the call I want Bluetooth audio to reconnect back to the Gear.
When I'm in the car, I'd like my phone to connect to the built-in Bluetooth phone and audio. I would like to stay it like this for as long as my car audio system is on. This means I won't receive any notifications on the Gear, but I reckon this is rather good while driving. When my car audio is off, I'd like the phone to automatically reconnect back to the Gear.
There are two pieces of software that helped me with achieving this:
Tasker. It's not free, but is worth every cent you spend on it. What's more, you can download a 7-day free trial to play with this guide before you commit to buying it.
Secure settings. All the functionality you need for this guide is included in the free version.
My triggers are:
Phone ringing or off hook and not in the car: connect to the earpiece
Phone idle and not in the car: connect to the Gear
Car application is launched (happens automatically when I plug my HTC One M8 into its car holder): toggle car mode on, which, in turn, connects to the car Bluetooth
Power disconnected (which is what happens when I turn car engine off or pull the phone from the car holder) and the car mode was on: toggle car mode off
Car mode switched off: connect to the Gear
Device boot: connect to the Gear
Now, you can import the attached file into Tasker on your phone and give it a go. You will need to go and replace the device MAC addresses and names with YOUR devices first (in Secure Settings configuration for each and every relevant task).
If you don't have in-car Bluetooth, just disable the corresponding profiles.
Now, there are some things that need improvement:
Right now I can't answer the calls on the Gear even if I want (e.g. if I forgot my earpiece at home or if it's out of battery). The reason for this is the way Secure Settings plugin performs BT Connect action: it disconnects the currently connected device first and only then tries connecting the other device. Also, there is no way to figure out if this connection was successful or not. I'm thinking of implementing a special toggle that will disable automatic earpiece connection on user request.
One scenario that is not properly implemented yet is switching from in-car BT to the earpiece while in the call (e.g. when you arrive at your destination while talking on the phone and want to live the car without disconnecting the call). Right now this requires manual intervention.
Unfortunately, Bluetooth connectivity of many devices is still quite buggy. I often find that, despite the fact the phone shows it's connected to the device, the audio is not going through. Or the device doesn't think it's connected (both happen quite often with my in-car BT). Usually, what helps in this situations is resetting Bluetooth on the phone or on the device or on both. I'm thinking of adding BT off/on action before any device switch just to improve reliability. However, sometimes the device needs to be reset, which may be easy (e.g. turning the earpiece off and on) or not (you can't turn the in-car BT off without stopping the engine).
That's all for now. Feedback is appreciated!
Great add thank you!
Y
Sent from my SAMSUNG-SM-N900A using XDA-FORUM, powered by appyet.com
I'm having difficulty opening your file below. Do you open it using tasked, open via file explorer and edit or open via service manager. I also have the m8 and appreciate all the work you've done. I'm fairly new to tasked so figured it would be easier to change your file and then load it.
kartch said:
I'm having difficulty opening your file below. Do you open it using tasked, open via file explorer and edit or open via service manager. I also have the m8 and appreciate all the work you've done. I'm fairly new to tasked so figured it would be easier to change your file and then load it.
Click to expand...
Click to collapse
I have appradio 2. Is there a way to modify this to always disconnect the gear and connect the car radio when I plug in USB from the radio?
You can also accomplish all this with LLama profiles which is a free application
I ended up making my own. Was better as now I have some working knowledge of tasker and secure settings. I dont have Bluetooth in my car so was a little easier.
One thing I did add was a 5 second wait/delay so I can still look at who is calling on the watch, decide if i want to answer or reject from the watch and then if I do answer it automatically disconnects the Gear and allows you to talk through the phone or earpiece.
Thats my only addition as it maintains some function of the watch to allow screening of calls without pulling phone from pocket.
There is a bluetooth setting if you'll only use it for media or phone calls or both )
Just sayin
Proud to Be PINOY
Follow us on twitter @BuhayKolehiyo and @pinoulyKaKung
Sent from my Galaxy Note 3
mjpineda94 said:
There is a bluetooth setting if you'll only use it for media or phone calls or both )
Just sayin
Proud to Be PINOY
Follow us on twitter @BuhayKolehiyo and @pinoulyKaKung
Sent from my Galaxy Note 3
Click to expand...
Click to collapse
How exactly this helps (or is even related to) the issue at hand?
mpogr said:
How exactly this helps (or is even related to) the issue at hand?
Click to expand...
Click to collapse
because instead of disconnecting and reconnecting your watch you can leave it on and choose another device for voice calls and or notifications
mjpineda94 said:
because instead of disconnecting and reconnecting your watch you can leave it on and choose another device for voice calls and or notifications
Click to expand...
Click to collapse
The problem is the phone can have only one device connected to it using phone headset profile and it won't use any other profile (e.g. multimedia) for making calls.
Sent from my GT-I9505 using Tapatalk
Thanks ! Help me alot!
Nc
I need some resolve to me after the call is automatically disconnected BT Handset Gear2 but have remained constantly connected. Do with Timo anyone have experience? Thank you.
I solved this by using an nfc tag as a switcher! I bought an Nfc tag for just 25cents and I wrote on it with the free app Trigger... When I get in the car I swipe the phone on the nfc tag and it connects to the car BT and when I swipe the phone again it switches back to the gear!
Inviato dal mio GT-I9300
mjpineda94 said:
There is a bluetooth setting if you'll only use it for media or phone calls or both )
Just sayin
Proud to Be PINOY
Follow us on twitter @BuhayKolehiyo and @pinoulyKaKung
Sent from my Galaxy Note 3
Click to expand...
Click to collapse
How do you get to that setting? The only option (I have it connected to an M8) is phone audio
longshot201 said:
How do you get to that setting? The only option (I have it connected to an M8) is phone audio
Click to expand...
Click to collapse
It doesnt work
you need NFC , Task or Llama
NRGZ28 said:
You can also accomplish all this with LLama profiles which is a free application
Click to expand...
Click to collapse
[EDIT]
Hi,
I'm trying with Llama, can you give me some help?
I add a new condition "ringing", but I don't understand the related action. Per my understanding I need to disconnect the GEAR, but I cannot find the specific action.
Ok, I understand that is needed Secure Setttings, but I still not able to do what I need: when the action is executed, I need to disconnect gear...
Ok, now everything is OK.
Just to clarify for who is not able to import che xml for Tasker or just want to use Llama that is free.
It is necessary to install "Secure Settings" and to create a Local Plugin Action, involving Secure Settings.
In Secure Settings, selecting the BT connect/disconnect action, it is possible to select from a list of paired device on which of them perform the "connect/disconnect" action
Thanks a lot.
Unlocked Pixel 2 here, not rooted. I've noticed that while in my car, voice typing via the voice button in Gboard doesn't work; it doesn't seem to be getting voice at all. Google Assistant works fine via Bluetooth, and everything including voice typing works when not connected to Bluetooth. If I use voice commands to send text messages, it works fine, but I can't voice type in text fields in FB Messenger and the like.
socal87 said:
Unlocked Pixel 2 here, not rooted. I've noticed that while in my car, voice typing via the voice button in Gboard doesn't work; it doesn't seem to be getting voice at all. Google Assistant works fine via Bluetooth, and everything including voice typing works when not connected to Bluetooth. If I use voice commands to send text messages, it works fine, but I can't voice type in text fields in FB Messenger and the like.
Click to expand...
Click to collapse
Clear data for the Google app and go through the setup again.
Sent from my Pixel 2 using Tapatalk
Tidbits said:
Clear data for the Google app and go through the setup again.
Click to expand...
Click to collapse
Didn't help. Replicated issue with my Bluetooth speaker, except that now I discovered that voice typing does not work when phone calls via BT are enabled, but does when the device only supports media. Google Assistant works either way.
socal87 said:
Didn't help. Replicated issue with my Bluetooth speaker, except that now I discovered that voice typing does not work when phone calls via BT are enabled, but does when the device only supports media. Google Assistant works either way.
Click to expand...
Click to collapse
Clear the data for it and also clear data for the keyboard. I had that problem about a month back and that's what fixed it for me. Figured it was the Google app but I did clear data from the keyboard first.
Sent from my Pixel 2 using Tapatalk
Perhaps a related issue?
http://www.androidpolice.com/2017/1...t-detecting-voice-input-bluetooth-headphones/
Mathman85 said:
Perhaps a related issue?
http://www.androidpolice.com/2017/1...t-detecting-voice-input-bluetooth-headphones/
Click to expand...
Click to collapse
Perhaps but it seems most people with this issue have been having it with Assistant not getting voice input. Assistant works fine for me, via Bluetooth or otherwise. It's just voice typing that's being a pain.
K, tried clearing data for both Gboard and Google app. Voice typing still does not work when phone calls are enabled for Bluetooth devices.
Disabled Bluetooth headsets under Google > Settings > Voice; it uses handset microphone for both Google Assistant and Voice Typing now even when connected to Bluetooth devices. Better than nothing I suppose. Google Support had nothing useful to suggest other than a factory reset.
Does this (voice typing over bt) actually works for anyone? I just need confirmation that this works for anyone before I go clearing any data or perform factory reset...
Can anyone connect to a bt headset, start voice typing and go to the other room (so phone's mic does not pick up sound) and say something into the bt mic and that be entered as text?
I could dictate text using Gboard over wired headphones in Duolingo app while learning Spanish in my car. Now that I started using Samsung Galaxy Buds in car, I can no longer dictate like that over Bluetooth. I do not have any other bt headphones at the moment to try them out.
Assistant works if i press and hold the earpiece, but not by simply saying "Ok Google". But there is no option of telling Assistant to type in some text in the current app. Not that I know of.
You have to use something like BT mono and activate it whenever you want to type via Bluetooth. I use it whenever I am trying to type via voice in a car using my Motorola whisper, which does a much better job than the built-in microphone..