htc camera, blurry pictures in the dark with flash - AT&T, Rogers HTC One X, Telstra One XL

Why can't HTC fix this? They are blurry because the shutter is too fast and the light doesn't stay on long enough, whereas the galaxy s3 turns the light on, focuses, than takes the pictures.
Seems like an easy software fix

For_itembine said:
Why can't HTC fix this? They are blurry because the shutter is too fast and the light doesn't stay on long enough, whereas the galaxy s3 turns the light on, focuses, than takes the pictures.
Seems like an easy software fix
Click to expand...
Click to collapse
Give it a shot and report back lol honestly ice never seen this problem.
Sent from my HTC One XL using Tapatalk 2

For_itembine said:
Why can't HTC fix this? They are blurry because the shutter is too fast and the light doesn't stay on long enough, whereas the galaxy s3 turns the light on, focuses, than takes the pictures.
Seems like an easy software fix
Click to expand...
Click to collapse
i am also having the same problem did you manage to find a solution

Related

Capacitive Button Backlight

do any of you guys experience the issue where the capacitive buttons dont light up when theyre supposed to ? which is almost.... always ?
one really annoying thing for me :|
Yes, you're not the only one to have this but It's very intermittent for me.
Sent from my HTC Desire S using XDA App
In my brief time with the DS, the buttons lit up just once. In anything other than full light, they were useless.
Sent from my HTC Incredible S using XDA App
well tbh i dont have DS ...yet. im thinking if i should buy this or incredible S :| had optimus 2x in mind.... but its got issues lol.
any1 tried to play dungeon defenders on this phone ? if so ,does it work smoothly enough ? and btw, hows the loudspeaker ? good quality or still crappy -.- ?
My experience is that buttons backlighting simply doesn't work. Sometimes they light up (no matter if environment is dark or bright) but most of the time they don't. Completely sporadic behavior. Makes it difficult to use device in the dark. Engadget has highlighted this problem in their review of Desire S http://www.engadget.com/2011/04/10/htc-desire-s-review/
hm... looks like it works for me okay
Swapped the DS for an Incredible S, backlit buttons work perfectly. So suspect DS software issue?
Sent from my HTC Incredible S using XDA App
I haven't noticed any problems either, they are lit when they are supposed to.
Sent from my HTC Desire S using XDA Premium App
No problems here
Sent from my HTC Desire S using XDA App
xilw3r said:
do any of you guys experience the issue where the capacitive buttons dont light up when theyre supposed to ?|
Click to expand...
Click to collapse
Works fine here.
Seems ok here.
Very bizarre - got rid of the DS after a day mostly for the wifi issue, but to a degree also because I could not see the buttons in anything other than full light! They literally came on once and that was when I connected it with my PC.
How can that be so when other folks don't have that issue. Different software versions?
Everything ok here.
DS S-OFF with superuser and BusyBox installed. (ROOT)
Maybe a hard reset would had helped.
There are well reported software issues with the buttons, basically the phone detects the background ambient light levels and decides whether our not to light up the buttons
Sometimes in a dark room the presence of a bright light source such as a window or a bright Tv stop them from lighting
unfortunately there us nothing we can do.
Although considering that the buttons don't change positions I always know where they are and which one is which so I can't see what the real problem is?
Sent from my HTC Desire S using XDA App
Ive had to get used to guessing where the buttons are as well.
As an aside you can force them on by putting your thumb over the front camera.
Not a solution but useful when your stuck.
Gordon
gordonendersby said:
As an aside you can force them on by putting your thumb over the front camera.
Gordon
Click to expand...
Click to collapse
Covering front camera doesn't help in my case IE buttons don't light up.
if you cover sensors on the top left of the screen (one cm to the left from HTC logo) the light should turn on after 2-3 seconds.
Its not the front camera that performs the light sensing it's another sensor thats located on the front face of the phone just to the left of the word hTC under the glass.
you can test this by covering the top left of your phone with your left finger/thumb and after 2-3 seconds the buttons should light up.
edit: sorry just realised that I said same as post above.
Sent from my HTC Desire S using XDA App
funny htc with all their adjustments ...
Haven't had any probe.. work on light sensor,so if there's light shining on phone then won't work,if in dim lit room then they light up..
Sent from my 7 Mozart using XDA Windows Phone 7 App

Long bright light before flash

Hi, my G2x has this really bright LED light that goes for a good 5 seconds before it actually takes a picture. Is there anyway to stop this? If I'm on the receiving end it blinds me, as it does other people when getting their picture taken.
Its for the auto focus. It will remain lit for as long as it takes to focus. Not sure if you can disable but doing so would also disable its ability to focus.
Sent from my LG-P999 using XDA Premium App
Actually, it sounds more like the red-eye reduction flash mode to me. Instead of using "Auto" for your flash setting, try manually setting the flash type you want to use.
is this a serious question? TURN OFF THE FLASH!
danz8509 said:
is this a serious question? TURN OFF THE FLASH!
Click to expand...
Click to collapse
Is that a serious answer? If you turn off the flash then the picture will come out dark, he is refering to the light that comes on before the flash.
Yea I just had some pics taken with my phone. It was dark, and when they hit the button, the LED light came on for like 3-4 seconds, then flickered while it took the pic.
My Nexus One did the same thing. It is for the focus, since we have an auto-focusing lense.

Question about auto brightness...

When set to auto does anyone have the screen lighten up then darken as you browse through a site?
It is really noticeable when I am on Google+(white background). I don't remember having this happen on my G2. Anyways I now don't use auto.
Just wondering if its normal.
Sent from my HTC One S.
It might be that while holding your phone you cover the light sensor and by that simulate dark surroundings?
I would guess that you have it near some surface. So when it shows white background, the light reflects from surface and the sensor thinks its "bright" outside, so turns on the brightness. As you surf and see some picture or change page (or w/e what doesnt have so much white) the sensor detencs that its not that bright anymore and turns down brightness...
Atleast that would be my guess. Screen does make some light and sensor can get affected by it (its above screen, u can see it true glass).
I noticed this too while playing on the demo at a TMobile store. It was only when I went to the HTC Play or movies or whatever it's called. Some of the movies would darken the screen when they started playing. Kind of odd. I wasn't moving around (changing light on the phone). Just standing there at the counter playing with it.
LikeaG2root said:
When set to auto does anyone have the screen lighten up then darken as you browse through a site?
It is really noticeable when I am on Google+(white background). I don't remember having this happen on my G2. Anyways I now don't use auto.
Just wondering if its normal.
Sent from my HTC One S.
Click to expand...
Click to collapse
I have noticed this
This happens to me as well, along with this yellow tint when on low brightness, anybody else getting the yellow tint? Or is it just me?
Sent from my MB860 using XDA
justin11141 said:
This happens to me as well, along with this yellow tint when on low brightness, anybody else getting the yellow tint? Or is it just me?
Click to expand...
Click to collapse
I believe I have seen this as well. Brief, full screen, yellow flicker/tint.
Happened to me during, or immediately after, the unlock/flash/root process, and haven't seen it since. Happened with a new notification came in, seemed to almost revolve around the notification bar. Is this consistent with what you saw?
This is common amongst a lot of light sensors. Happened to me on my Vibrant and when I had a iphone.
Sent from my HTC VLE_U using XDA

AT&T One X capacitive lights on most of the time! Calibrations off? Anybody else?

Is anyones at&t htc one X capacitive lights calibration seem to be off. I've noticed must of the time they stay on. Even under bright florescent lights at work. They only go off pretty much in direct sunlight. Or if I hold the phone up to the light. And before anybody asks I do not have a case blocking the light sensor. It does react to my finger when I place over it.
Sent from my HTC One X using xda premium
I think that's somewhat normal for this device, which is why there's a mod in the dev section that you can flash (assuming you're rooted/bl-unlocked) that will either disable them entirely, or dim them to an acceptable level.
Use the app adjbrightness in the app market and you can fore them to be off all the time
Sent from my HTC One X using XDA
Yup, I think that's just how its calibrated. I've noticed the buttons lit when there is plenty of light. And there have been a few times where the room lighting was very dim, and the buttons were not lit, when it would have been useful for them to be.
redpoint73 said:
Yup, I think that's just how its calibrated. I've noticed the buttons lit when there is plenty of light. And there have been a few times where the room lighting was very dim, and the buttons were not lit, when it would have been useful for them to be.
Click to expand...
Click to collapse
Well thanks everyone for the replies. I guess that's just how they work. I will try one of the apps out too and see. I appreciate the input.
Sent from my HTC One X using xda premium

Update or bad screen?

Hey people
Got my smart watch about 4 days ago and it was all good until tonight and now for some reason i can't see the clock anymore unless i press the power button :S i could have sworn it had a low light mode and the clock was visable ok but since tonight i can't see the time unless there's a light pointing straight at the watch. I hooked it upto the service centre thing and updated it through that but hasn't helped.
am I going mad here and just seeing things? :S
EDIT: i also noticed when i turn it off i get some weird colours appearing in the clockface some pinks/purples. i don't understand it was ok a couple of hours ago and it's been on my wrist the whole time :S
Did you try to reset the watch? Also our you have any custom clocks installed, remove them. As after reset, Sony smartwatch app will reinstall them on the watch, once the watch and the phone are connected.
On your watch, go to settings and tap reset watch.
Sent from my HTC One SV using Tapatalk
tried that chap loads of times and nothing tried re-installing firmware and nothing swell. no custom watchfaces installed either just the stock ones
Roxas598 said:
Hey people
Got my smart watch about 4 days ago and it was all good until tonight and now for some reason i can't see the clock anymore unless i press the power button :S i could have sworn it had a low light mode and the clock was visable ok but since tonight i can't see the time unless there's a light pointing straight at the watch. I hooked it upto the service centre thing and updated it through that but hasn't helped.
am I going mad here and just seeing things? :S
EDIT: i also noticed when i turn it off i get some weird colours appearing in the clockface some pinks/purples. i don't understand it was ok a couple of hours ago and it's been on my wrist the whole time :S
Click to expand...
Click to collapse
Just to make it clear, you are not talking about the low power mode right? No backlight, but can be still seen by people in ambient light??? Maybe you should take a picture of the watch so we can clearly see what is going on.
At night my sw2 turns of the screen completely. But when I MOVE the watch it turns on the clock on the display. I think it has an accelerometer that turns off the screen when no movement is detected.
Sent from my GT-N5100 using Tapatalk
severoprisan said:
At night my sw2 turns of the screen completely. But when I MOVE the watch it turns on the clock on the display. I think it has an accelerometer that turns off the screen when no movement is detected.
Sent from my GT-N5100 using Tapatalk
Click to expand...
Click to collapse
The same for me. I think that isn't a bug, but accelerometer
Inviato dal mio LG-D802 utilizzando Tapatalk
It is normal.
It is a feature to save battery when it isn't worn.
I am more curious as to the "watch (display) turns on from moving it". Does the SW2 have an accelerometer? My watch display doesn't kick on when I move it. Or was this a feature of the earlier SmartWatches?
Nomad1600 said:
I am more curious as to the "watch (display) turns on from moving it". Does the SW2 have an accelerometer? My watch display doesn't kick on when I move it. Or was this a feature of the earlier SmartWatches?
Click to expand...
Click to collapse
I believe SW2 does have an accelerometer. Put your watch on a table, leave it untouched for while, screen completely turns off. Not even the low power watch mode is displayed. But once you move it, low power watch comes back on (without the backlight). I observed it many times when it was charging and when left at the bed side table.
But it is not utilized for backlight function. That is a missing feature people are asking for. But I don't really need it. Just like a regular watch, I press a button to turn the light on when I can't see it in the dark.
Sent from my HTC One SV using Tapatalk
thearif said:
I believe SW2 does have an accelerometer. Put your watch on a table, leave it untouched for while, screen completely turns off. Not even the low power watch mode is displayed. But once you move it, low power watch comes back on (without the backlight). I observed it many times when it was charging and when left at the bed side table.
But it is not utilized for backlight function. That is a missing feature people are asking for. But I don't really need it. Just like a regular watch, I press a button to turn the light on when I can't see it in the dark.
Sent from my HTC One SV using Tapatalk
Click to expand...
Click to collapse
Wow... I didn't even notice the screen going completely black after sitting for a while. I am still on watch honeymoon, and either the watch is on my wrist or turned off and on the dresser. But sure enough, it does go into a deeper "sleep" mode and wakes up when I pick it up. Nice!
I do see that having it wake to the backlit mode would be nice but it would seem to kill the battery since when worn it would be in more constant movement. Unless they tuned the accelerometer to only wake when a more significant motion happens.
Nomad1600 said:
Wow... I didn't even notice the screen going completely black after sitting for a while. I am still on watch honeymoon, and either the watch is on my wrist or turned off and on the dresser. But sure enough, it does go into a deeper "sleep" mode and wakes up when I pick it up. Nice!
I do see that having it wake to the backlit mode would be nice but it would seem to kill the battery since when worn it would be in more constant movement. Unless they tuned the accelerometer to only wake when a more significant motion happens.
Click to expand...
Click to collapse
Yeah the previous iteration of smartwatch from Sony did not have always on watchface and it was a necessity. And to see the time you had to turn on the display. One way was to double tap on the watch screen to wake it up. Another way was to light up the screen by lifting your arm and turning the watch towards you. But the second way never really worked reliably.
But I don't think SW2 needs that. As we already have always on watch with great readability even in places where there little light.
Sent from my HTC One SV using Tapatalk
thearif said:
Just to make it clear, you are not talking about the low power mode right? No backlight, but can be still seen by people in ambient light??? Maybe you should take a picture of the watch so we can clearly see what is going on.
Click to expand...
Click to collapse
Sorry for the delay! yeah seems my watch didn't have the low power mode and now it does it's just near impossible to see unless i have some light directly on the screen
Roxas598 said:
Sorry for the delay! basically sitting here in the dark i can't see the time on the display at all but i could when i first got it now I need to actually press the button to see the time :S dunno if it's just me thinking i could or not is the problem lol
Click to expand...
Click to collapse
So there is nothing on the screen not even the low power mode on the watch. I don't know what to tell you boss as you have already done a reset. Maybe one thing to check is to use SUS to reflash the firmware using your pc, if you haven't done it already.
Sent from my HTC One SV using Tapatalk
thearif said:
So there is nothing on the screen not even the low power mode on the watch. I don't know what to tell you boss as you have already done a reset. Maybe one thing to check is to use SUS to reflash the firmware using your pc, if you haven't done it already.
Sent from my HTC One SV using Tapatalk
Click to expand...
Click to collapse
sorry chap i updated my post there is something on the screen but it's impossible to see without some sort of light source on it makes it kinda annoying to use could have sworn it wasn't when i first got it but figured i'd ask anyway!
Roxas598 said:
sorry chap i updated my post there is something on the screen but it's impossible to see without some sort of light source on it makes it kinda annoying to use could have sworn it wasn't when i first got it but figured i'd ask anyway!
Click to expand...
Click to collapse
No problem. I never considered the low power hard to see. But I guess most of the time I am in well lit places
Sent from my HTC One SV using Tapatalk

Categories

Resources