Related
I'm posting this on the four android-related forums that I participate in, in hopes that someone has seen this before and knows what to do.
Here's what I had:
- Droid 2 Global, unlocked, rooted, with Fission ROM, using Rogers Wireless, a GSM network in Canada
- it had been working just fine for 5 months
Here's what I did:
- Used RSDLite and the SBF loader to flash the stock 2.4.330 firmware as seen here: http://droid.koumakan.jp/wiki/SBF
- ended up with a bootloop, as the directions said I would. cleared data and cashe, no problem, phone booted.
- started up phone, switched to GSM mode, entered APNs, immediately had data service, tested phone functionality, all was well, used APN backup/restore and APN Manager to make backup files of my APNs
- Used stock recovery mode to upgrade to 4.5.607 (gingerbread) firmware as seen here: http://droid.koumakan.jp/wiki/4.5.607_Firmware
- I used the file linked to from here: http://www.droid-life.com/2011/08/22/gingerbread-build-for-the-droid2-global-leaks/
- started up phone, switched to GSM mode, entered APNs, immediately had data service, tested phone functionality, all was well, used APN backup/restore and APN Manager to make backup files of my APNs
- rooted phone using the adb method that is out there. rebooted and confirmed root access. installed a couple apps that need root. tested phone functionality, all was well. used APN backup/restore and APN Manager to make backup files of my APNs
- As described here, http://droid.koumakan.jp/wiki/CyanogenMod Installed Droid 2 Recovery Bootstrap and ROM Manager in order to flash CWM. rebooted into CWM, factory reset, installed the latest release (10/06), and rebooted
- started up phone, switched to GSM mode, phone app crashed immediately (as is to be expected, based on known bugs), rebooted for it to take effect
Now here's the problem:
- phone can make calls and receive texts with no problem, but cannot get data. wifi also works.
- went into wireless settings, mobile networks, access point names, nothing shows up. Clicked "add APN". entered the APN info that had worked for me before at the past two junctions. hit menu button, then save. takes me back to the APN screen, but no APN shows up.
- repeated this cycle a few times following reboots, etc. Eventually the phone gets to the point where the "add APN" button will not even come up when the menu key is hit.
- during the above, was also checking the "network operators" setting. The phone does locate all of the networks that are "in the air" but no matter which one I choose it will tell me "your sim card does not allow a connection to this network"
- used root explorer to check /data/data/com.android.providers.telephony/databases/telephony.db. There is a list of about 1500 APNs. There are multiple entries for Rogers including all of the ones I tried to enter that appeared not to save.
- used APN backup/restore and APN manager to attempt deleting existing APNs, restoring the ones that were known to work, etc. Nothing works. These programs do work, and when I check the telephony.db file I can see what they have done to the file, but they are unfortnately unable to make any APN "stick" at the APN screen, and apparently that is the only way that it will work.
more info:
- I've noticed that the list of rogers entries seems to get larger and larger as I go through this process multiple times. I may be wrong, but it seems that this telephony.db file might not actually get changed or updated when you flash a new kernel/firmware/mod/rom to the phone.
- I'm sure that the lack of a list of APNs and the "sim card does not allow connection" message are related. For whatever reason there seems to be a bug in CM7 where the telephony.db file has problems "talking" to the APN screen in settings. But it must not affect most people.
- yes, I have tried a new SIM card.
- yes, I have tried clearing cache, data, dalvik, and fixing permissions.
- Anyone else on Rogers Running CM7 on a D2G? If so, I'd love to talk to you. Maybe I could convince you to send me a working CWM backup. I imagine that if you're a conscientious rommer, you have a backup made folling a fresh install of CM7.
I used to do at one point. The froyo base 2011.08.13 version was the last one that worked for me. Newer ones boot looped if SIM card is inside, no matter what I do. I stopped trying after couple further releases all of which boot looped. Essentially quit using CM4D2G due to bluetooth not working with BT handsfree. Later, after the official Motorola GB release came, I have not even looked back. Since I like few BLUR features, especially dialler, the GB Motorola released suits me very well. With the doubled battery life and the MUCH BETTER GSM radio in 606/607 bulds, phone finally settled down and I can now rely on it.
I have CM7 on another of my phones - actually 2 of them - a Milestone and (recently) a HTC Vision - I love CM7.1 especially on the latter!
I assume your phone works fine with stock rom - right?
Edit: I have a XT860 which is in for repairs - once I get it back and I have a reliable daily phone I plan to experiment with the new GB based CM4D2G. Hopefully this week...
leobg said:
I used to do at one point. The froyo base 2011.08.13 version was the last one that worked for me. Newer ones boot looped if SIM card is inside, no matter what I do. I stopped trying after couple further releases all of which boot looped. Essentially quit using CM4D2G due to bluetooth not working with BT handsfree. Later, after the official Motorola GB release came, I have not even looked back. Since I like few BLUR features, especially dialler, the GB Motorola released suits me very well. With the doubled battery life and the MUCH BETTER GSM radio in 606/607 bulds, phone finally settled down and I can now rely on it.
I have CM7 on another of my phones - actually 2 of them - a Milestone and (recently) a HTC Vision - I love CM7.1 especially on the latter!
I assume your phone works fine with stock rom - right?
Click to expand...
Click to collapse
Yes, everything works really well with stock rom. I was quite impressed, as it was my first GB experience. Unfortunately, as with cars, I am all about the "options", and I can't seem to let go of a feature once I have experienced it. I love CM7 and I really want to make it work for my D2G.
I posted this same thing at the rootzwiki thread, and one of the head developers said "You my friend may finally have identified where the gsm data issues are coming from. it isnt just you, it's 98% of the gsm users that arent having data". Another user got me to change a couple of permissions. I thought he was onto something but it didn't work, either. Nonetheless, I think I brought enough attention to this issue and also gave them something to work with through all my trial and error. I am optimistic.
But, for now, I think I have to take CM7. I want my data! I am really tempted to just give stock GB a shot. But Blur scares me. Most people don't seem to like it, though I admit I don't fully understand what Blur is! I see there is MIUI and apex, angel Hexen and VenusX. I might have to try them first.
hallo!
had exactly the same problem! i bought a verizon phone an using it in greece!
But i simply dowloaded some APNs manager from the market and within 2 minutes my phone was connecting to the internet!! So if this worked for me i`m sure its gonna work for u too!!
greek_lover_69 said:
hallo!
had exactly the same problem! i bought a verizon phone an using it in greece!
But i simply dowloaded some APNs manager from the market and within 2 minutes my phone was connecting to the internet!! So if this worked for me i`m sure its gonna work for u too!!
Click to expand...
Click to collapse
Can you be more specific as to what you did? Because it sounds exactly like something I tried already. What was the exact name of the software you used? Was your problem 100% exactly the same as mine, or just similar? I literally can't make an APN show up at the APN screen at all.
seventieslord said:
Can you be more specific as to what you did? Because it sounds exactly like something I tried already. What was the exact name of the software you used? Was your problem 100% exactly the same as mine, or just similar? I literally can't make an APN show up at the APN screen at all.
Click to expand...
Click to collapse
Some people have this exact problem with the D3, looks like in the D3 placing the phone in airplane mode and then on again is enough to make the APN manager able to read the MCC/MNC codes and, consequently, to store the provided apn.
I wish it was that easy, but it's not. I have tried a number of solutions similar to that but no dice. I appreciate the attempt though.
Sent from my DROID2 GLOBAL using XDA App
For the record I have that problem on the D2g flashed with the latest builds of cyanogen rom, (with the same SIMs perfectly working on D3 and D2g with the stock rom), and the airplane mode trick doesn't works too.
So far I haven't found a solution
To get my wife's d2g to work in japan I had to use root explorer to manually edit a file. The file is located at etc/ppp/peers/pppd-ril.options mount the file rw and manually edit the user name and password to match your apn. Toggle airplane mode on off after saving changes and it should work.
Sent from my HTC S710d using XDA Premium App
Thanks, i guessed that if a proper fix may be hard to find, a workaround was easy enough, I'll try it later with the gingerbread froyo.
dobosininja said:
To get my wife's d2g to work in japan I had to use root explorer to manually edit a file. The file is located at etc/ppp/peers/pppd-ril.options mount the file rw and manually edit the user name and password to match your apn. Toggle airplane mode on off after saving changes and it should work.
Sent from my HTC S710d using XDA Premium App
Click to expand...
Click to collapse
sounds interesting. I will give that a try the next time I flash CM7. I moved on to Apex. It's ok, but absolutely dreadful for battery life. I can't imagine CM7 is any better considering it has about 50 more bells and 125 more whistles. But I do prefer CM7 to anything else so as soon as I actually have some tweaking time again, I'll give this a shot.
Since both CM7 and Apex are built off the same firmware, I could just flash them overtop eachother, and wipe date and cache, right? As long as it's that easy, I could see myself trying this sooner.
seventieslord said:
sounds interesting. I will give that a try the next time I flash CM7. I moved on to Apex. It's ok, but absolutely dreadful for battery life. I can't imagine CM7 is any better considering it has about 50 more bells and 125 more whistles. But I do prefer CM7 to anything else so as soon as I actually have some tweaking time again, I'll give this a shot.
Since both CM7 and Apex are built off the same firmware, I could just flash them overtop eachother, and wipe date and cache, right? As long as it's that easy, I could see myself trying this sooner.
Click to expand...
Click to collapse
I gave this a try, and no dice. Too bad.
Thanks anyways.
The Solutor said:
Some people have this exact problem with the D3, looks like in the D3 placing the phone in airplane mode and then on again is enough to make the APN manager able to read the MCC/MNC codes and, consequently, to store the provided apn.
Click to expand...
Click to collapse
I now own a D3. CM9 is doing the exact same thing to me!
I tried what you said and I am still not getting data. phone and texts work though, just like before.
So long story short...
- Updated to CM10 official "stable" build last night (from November 1st Nightly, which I never had issues with)
- Started it up, phone wouldn't activate.
- Read about a hotfix. Wiped, flashed, applied hotfix, etc.
- Still could not activate/receive phone calls.
- Tried to flash back to stock with root and it didn't work.
- Realized my IMEI was missing.
- Followed a guide to get my IMEI back.
- Still not much progress. I can get 4G data, but when I try to make a phone call it says "Mobile network not available".
- Decided to ODIN + flash 100% stock
- Still no phone calls sending/receiving.
Now I can access 4G data, but I cannot make or receive phone calls. I have tried various wipes, resets, battery removals, SIM removals, etc. etc.
Anyone have any advice for me? It has been about 12 hours now that I've been without service.
It does show that I have 3-4 bars on the status bar, but I still cannot make calls.
Much appreciated.
aereolaite said:
So long story short...
- Updated to CM10 official "stable" build last night (from November 1st Nightly, which I never had issues with)
- Started it up, phone wouldn't activate.
- Read about a hotfix. Wiped, flashed, applied hotfix, etc.
- Still could not activate/receive phone calls.
- Tried to flash back to stock with root and it didn't work.
- Realized my IMEI was missing.
- Followed a guide to get my IMEI back.
- Still not much progress. I can get 4G data, but when I try to make a phone call it says "Mobile network not available".
- Decided to ODIN + flash 100% stock
- Still no phone calls sending/receiving.
Now I can access 4G data, but I cannot make or receive phone calls. I have tried various wipes, resets, battery removals, SIM removals, etc. etc.
Anyone have any advice for me? It has been about 12 hours now that I've been without service.
It does show that I have 3-4 bars on the status bar, but I still cannot make calls.
Much appreciated.
Click to expand...
Click to collapse
i don't know the number off the top of my head, but someone said to call the # that gets your number reprovisioned, that could possibly fix the issue thats plaguing you
edit: just did a quick search and someone said just call verizon from another phone and say "hey, i need ya to reprovision my phone, its number is blahblahblah" and just go thru it that way
digitalsynner85 said:
i don't know the number off the top of my head, but someone said to call the # that gets your number reprovisioned, that could possibly fix the issue thats plaguing you
Click to expand...
Click to collapse
Try to reprovision your sim card using this code:
*2767*3855#
It will format your internal storage so back it up. You must be on TouchWiz as well.
Sent from my SCH-I535 using xda app-developers app
Same Issue!
Still not much progress. I can get 4G data, but when I try to make a phone call it says "Mobile network not available".
- Decided to ODIN + flash 100% stock
- Still no phone calls sending/receiving.
Now I can access 4G data, but I cannot make or receive phone calls. I have tried various wipes, resets, battery removals, SIM removals, etc. etc.
Anyone have any advice for me? It has been about 12 hours now that I've been without service.
It does show that I have 3-4 bars on the status bar, but I still cannot make calls.
Much appreciated.[/QUOTE]
Same nearly EXACT problem for me. Back on stock now still no phone but I do have data. Did the provisioning code but still get mobile network not available message. Did calling Verizon work? Any help greatly appreciated!
jamestheartist said:
Still not much progress. I can get 4G data, but when I try to make a phone call it says "Mobile network not available".
- Decided to ODIN + flash 100% stock
- Still no phone calls sending/receiving.
Now I can access 4G data, but I cannot make or receive phone calls. I have tried various wipes, resets, battery removals, SIM removals, etc. etc.
Anyone have any advice for me? It has been about 12 hours now that I've been without service.
It does show that I have 3-4 bars on the status bar, but I still cannot make calls.
Much appreciated.
Click to expand...
Click to collapse
Same nearly EXACT problem for me. Back on stock now still no phone but I do have data. Did the provisioning code but still get mobile network not available message. Did calling Verizon work? Any help greatly appreciated![/QUOTE]
Try a new sim card?
bageloid said:
Same nearly EXACT problem for me. Back on stock now still no phone but I do have data. Did the provisioning code but still get mobile network not available message. Did calling Verizon work? Any help greatly appreciated!
Click to expand...
Click to collapse
Try a new sim card?[/QUOTE]
Yep. Put my girlfriend's in and same thing. Going to try re-rooting, installing stock TW again, and see what happens.
jamestheartist said:
bageloid said:
Try a new sim card?
Click to expand...
Click to collapse
Yep. Put my girlfriend's in and same thing. Going to try re-rooting, installing stock TW again, and see what happens.
Click to expand...
Click to collapse
Your eri might be borked... The only way I was able to fix that on my phone was using the now deleted IMEI and ERI tool thread.
edit:http://webcache.googleusercontent.c....6.0...0.2...1c.1.15.psy-ab.DIaMHJmSIlU&pbx=1
Unfortunately the attachment links are dead
Damn, that's what I figured too. I have seen some issues semi-related to this subject with others who were running CM 10.1 roms, not just S3 owners, so I guess that no matter how many times you do something right, sometimes things still go wrong, It just is what it is, or that damn program HiApn was a little beyond me, and I borked it up that way. Got the new TouchWiz multi-window OTA update update fine though, re-rooted it and was going to explore it further, but I think I'm just going to replace it under warranty since the one year will be up in a couple weeks. Sorry to do that, since it keeps the price of phones high, but crap. It looks like it's toast for telephony, although 911 DOES work, just nothing else phone related. It sees my phone number, and can read that much of the sim, and my IMEI appears to be true. Strangest damn thing! Oh well, looks like a re-locked bootloader and Triangle Away for me.Thanks for your responses, best of luck to the OP....
(Oh, and btw, I actually like that multi-window feature, so when I get my new one, I'm just going to leave it factory!)
Wait a minute...borked ERI? That's fixable? If it's not too radical, I have a few days to try that before I have to send my original phone back, so if I can fix it I'd rather do that.
After reading that post you put up a link to, my ERI is already at 5...?
Hey everyone. I'm having a problem with my network after going into the test menu (*#*#4636#*#*). I'm hoping someone can help me out, and hopefully this will also help others in the future that have the same problem. I haven't seen any other discussion about this for this phone. I am on Verizon Wireless and have a Droid RAZR MAXX HD.
Background: I was helping a friend re-enable 4G LTE on her HTC Thunderbolt, which the store had disabled for her when she first got it because 4G was not yet available in her city. I figured this was done in the test menu, so I went to it from mhy phone to help her set similar settings.
The Problem: Stupidly enough, because I love tinkering with things, I pressed the menu button (...) and pressed the "Set GSM/UMTS Band" button. My two options were "USA Band" and "Cellular". I panicked a bit, then thinking, decided to select "USA Band". When I did that, I was on Verizon Wireless, and I get LTE data. However, I can't make or receive phone calls. My phone won't ring (though it "rings" for the person trying to call me and they get to my voicemail). If I try to call someone else, it hangs perpetually at "dialing". Setting the band to "Cellular" gives me both LTE/1X data and phone calls, but now I'm perpetually stuck on "Extended Network", which I can only imagine is U.S. Cellular in my area.
Normally, this wouldn't be a problem. I can make and receive calls just fine, data works OK. However, I'm afraid that when I travel and (what I think is) U.S. Cellular, I'm going to be in trouble, and not be able to make or receive phone calls. I need to fix this before I travel. I understand that doing a factory reset or SBF to ICS will solve the problem (please confirm if this will fix it?), but that's my ultimate and final solution. I'm not rooted right now so I don't have the luxury of backing up my app data and text messages, and would like to find a different way to fix this first if it exists. I'm hoping I didn't permanently screw up my phone. Any help is appreciated.
I would just backup your phone using my backup or my backup root. Rooting your RAZR HD maxx is very very simple.. I would backup using my backup and restore back to stock ics using matts utility (Google it) and then root, then protect root using ota root keeper from the marketplace and then protect root and unroot in the app. Then install the ota update from Verizon. Then re enable root in the app and make sure to update binaries in superuser. That is very important. Then just protect root and unroot and upgrade to jellybean. Then your problem will be fixed and you will have root on jellybean. If you need me to list it in simpler terms and help you through any of the process, just message me bud. Good luck!
Sent from my DROID RAZR HD using Tapatalk 2
joenforcer said:
Hey everyone. I'm having a problem with my network after going into the test menu (*#*#4636#*#*). I'm hoping someone can help me out, and hopefully this will also help others in the future that have the same problem. I haven't seen any other discussion about this for this phone. I am on Verizon Wireless and have a Droid RAZR MAXX HD.
Background: I was helping a friend re-enable 4G LTE on her HTC Thunderbolt, which the store had disabled for her when she first got it because 4G was not yet available in her city. I figured this was done in the test menu, so I went to it from mhy phone to help her set similar settings.
The Problem: Stupidly enough, because I love tinkering with things, I pressed the menu button (...) and pressed the "Set GSM/UMTS Band" button. My two options were "USA Band" and "Cellular". I panicked a bit, then thinking, decided to select "USA Band". When I did that, I was on Verizon Wireless, and I get LTE data. However, I can't make or receive phone calls. My phone won't ring (though it "rings" for the person trying to call me and they get to my voicemail). If I try to call someone else, it hangs perpetually at "dialing". Setting the band to "Cellular" gives me both LTE/1X data and phone calls, but now I'm perpetually stuck on "Extended Network", which I can only imagine is U.S. Cellular in my area.
Normally, this wouldn't be a problem. I can make and receive calls just fine, data works OK. However, I'm afraid that when I travel and (what I think is) U.S. Cellular, I'm going to be in trouble, and not be able to make or receive phone calls. I need to fix this before I travel. I understand that doing a factory reset or SBF to ICS will solve the problem (please confirm if this will fix it?), but that's my ultimate and final solution. I'm not rooted right now so I don't have the luxury of backing up my app data and text messages, and would like to find a different way to fix this first if it exists. I'm hoping I didn't permanently screw up my phone. Any help is appreciated.
Click to expand...
Click to collapse
Instead of rooting the device, you might just do a factory reset to resolve this issue... Saves your warranty and rooting won't fix the radio misconfiguration.
Sent from my XT925 using Tapatalk 2
A simpler set of steps are:
1. Backup my phone phone
2. Download matts utility
3. Restore back to ICS using the utility
4. Root using utility
5. Push OTA root keeper app using utility
6. Protect root and unroot
7. Install over the air update (OTA)
8. Enable root and update binaries in app
9. Protect root again and unroot
10. Install JB and re enable root
Rooting is definitely worth the benefits and restoring back to stock firmware is very easy if you need to return it under warranty. I have never had a case where they rejected my warrant because I was rooted. They all go to a factory and are just sbf'd back to stock anyway and repaired hardware wise. I wouldn't worry about it buddy. And another note, all the employees of my Verizon store have their phones rooted and even encouraged me to root mine for obvious reasons. Good luck buddy.
Sent from my DROID RAZR HD using Tapatalk 2
Thanks for the detail, itsdubai. I am aware of how to root, and I had my phone rooted on ICS and I used Voodoo OTA RootKeeper. The step I flubbed was not using "temp unroot". That caused me to lose root even though I thought I had protected it. I wish I had done it correctly the first time because then I wouldn't be so concerned about having to do a factory reset or SBF to ICS. However, the My Backup suggestion has definitely alleviated some of my concerns. The loss of text messages and other unrecoverable data was my biggest issue. I hate losing my app data but I can stomach that.
Do you or does anyone else know about this particular "Set GSM/UMTS Band" problem, and are we 100% sure that a factory reset or SBF back to ICS then OTA update will for sure fix the problem? Is there no other way to fix this without doing one of those things? I imagine that this configuration is set on the ROM somewhere and that Verizon just didn't leave an option to have the right bands active, so I'm just trying to make 100% sure that refreshing the ROM like this will fix it. Even with My Backup, setting a phone back up from factory is frustrating.
joenforcer said:
Thanks for the detail, itsdubai. I am aware of how to root, and I had my phone rooted on ICS and I used Voodoo OTA RootKeeper. The step I flubbed was not using "temp unroot". That caused me to lose root even though I thought I had protected it. I wish I had done it correctly the first time because then I wouldn't be so concerned about having to do a factory reset or SBF to ICS. However, the My Backup suggestion has definitely alleviated some of my concerns. The loss of text messages and other unrecoverable data was my biggest issue. I hate losing my app data but I can stomach that.
Do you or does anyone else know about this particular "Set GSM/UMTS Band" problem, and are we 100% sure that a factory reset or SBF back to ICS then OTA update will for sure fix the problem? Is there no other way to fix this without doing one of those things? I imagine that this configuration is set on the ROM somewhere and that Verizon just didn't leave an option to have the right bands active, so I'm just trying to make 100% sure that refreshing the ROM like this will fix it. Even with My Backup, setting a phone back up from factory is frustrating.
Click to expand...
Click to collapse
I had similar issues when I was playing with a Droid bionic. The only solution I found to fix the signal was to reset to do a factory reset... I saw out actually reset some BP code which I found was really interesting.
Sent from my XT925 using Tapatalk 2
Just warning when you play in this setting ... some phone and baseband ... is not restaured with a full restore or reset...
( by exemple the pantech burst ... go to wcdma mode only ... switch back to default with lte... lte never working ... some friend have same problem with different phone ... )
Same problem
danifunker said:
I had similar issues when I was playing with a Droid bionic. The only solution I found to fix the signal was to reset to do a factory reset... I saw out actually reset some BP code which I found was really interesting.
Sent from my XT925 using Tapatalk 2
Click to expand...
Click to collapse
Brother i am facing the same problem i have installed the USSD code runner software where i set the Radio Band to USA after that i have lost my cellular functions like now i cant call, msg anyone. i go to many person who know about the smart phone alot but can,t a soloution if any one can help i will be very thankful to you. I AM IN LAHORE PAKISTAN
ali021 said:
Brother i am facing the same problem i have installed the USSD code runner software where i set the Radio Band to USA after that i have lost my cellular functions like now i cant call, msg anyone. i go to many person who know about the smart phone alot but can,t a soloution if any one can help i will be very thankful to you. I AM IN LAHORE PAKISTAN
Click to expand...
Click to collapse
I have also this problem since today. Please someone help!!!!!
joenforcer said:
Hey everyone. I'm having a problem with my network after going into the test menu (*#*#4636#*#*). I'm hoping someone can help me out, and hopefully this will also help others in the future that have the same problem. I haven't seen any other discussion about this for this phone. I am on Verizon Wireless and have a Droid RAZR MAXX HD.
Background: I was helping a friend re-enable 4G LTE on her HTC Thunderbolt, which the store had disabled for her when she first got it because 4G was not yet available in her city. I figured this was done in the test menu, so I went to it from mhy phone to help her set similar settings.
The Problem: Stupidly enough, because I love tinkering with things, I pressed the menu button (...) and pressed the "Set GSM/UMTS Band" button. My two options were "USA Band" and "Cellular". I panicked a bit, then thinking, decided to select "USA Band". When I did that, I was on Verizon Wireless, and I get LTE data. However, I can't make or receive phone calls. My phone won't ring (though it "rings" for the person trying to call me and they get to my voicemail). If I try to call someone else, it hangs perpetually at "dialing". Setting the band to "Cellular" gives me both LTE/1X data and phone calls, but now I'm perpetually stuck on "Extended Network", which I can only imagine is U.S. Cellular in my area.
Normally, this wouldn't be a problem. I can make and receive calls just fine, data works OK. However, I'm afraid that when I travel and (what I think is) U.S. Cellular, I'm going to be in trouble, and not be able to make or receive phone calls. I need to fix this before I travel. I understand that doing a factory reset or SBF to ICS will solve the problem (please confirm if this will fix it?), but that's my ultimate and final solution. I'm not rooted right now so I don't have the luxury of backing up my app data and text messages, and would like to find a different way to fix this first if it exists. I'm hoping I didn't permanently screw up my phone. Any help is appreciated.
Click to expand...
Click to collapse
does your problem solved?? I have also this problem on motorola droid razr hd.
in this problem
i just flash radio .img
solved.
Would you please be more specific? where do you get the img file from?
jalal-jap said:
in this problem
i just flash radio .img
solved.
Click to expand...
Click to collapse
Had the same problem on moto E. Resolved it by flashing the baseband modem file
joenforcer said:
Hey everyone. I'm having a problem with my network after going into the test menu (*#*#4636#*#*). I'm hoping someone can help me out, and hopefully this will also help others in the future that have the same problem. I haven't seen any other discussion about this for this phone. I am on Verizon Wireless and have a Droid RAZR MAXX HD.
Background: I was helping a friend re-enable 4G LTE on her HTC Thunderbolt, which the store had disabled for her when she first got it because 4G was not yet available in her city. I figured this was done in the test menu, so I went to it from mhy phone to help her set similar settings.
The Problem: Stupidly enough, because I love tinkering with things, I pressed the menu button (...) and pressed the "Set GSM/UMTS Band" button. My two options were "USA Band" and "Cellular". I panicked a bit, then thinking, decided to select "USA Band". When I did that, I was on Verizon Wireless, and I get LTE data. However, I can't make or receive phone calls. My phone won't ring (though it "rings" for the person trying to call me and they get to my voicemail). If I try to call someone else, it hangs perpetually at "dialing". Setting the band to "Cellular" gives me both LTE/1X data and phone calls, but now I'm perpetually stuck on "Extended Network", which I can only imagine is U.S. Cellular in my area.
Normally, this wouldn't be a problem. I can make and receive calls just fine, data works OK. However, I'm afraid that when I travel and (what I think is) U.S. Cellular, I'm going to be in trouble, and not be able to make or receive phone calls. I need to fix this before I travel. I understand that doing a factory reset or SBF to ICS will solve the problem (please confirm if this will fix it?), but that's my ultimate and final solution. I'm not rooted right now so I don't have the luxury of backing up my app data and text messages, and would like to find a different way to fix this first if it exists. I'm hoping I didn't permanently screw up my phone. Any help is appreciated.
Click to expand...
Click to collapse
Recently i also got into the same situation and the other day i had an early morning flight to catch, so i was in a hurry, i seeked all over the net but didn't got any solution other then flashing the ROM again which was a headache. Here i get you the solution of the same without formating the device !!
Boot your device to bootloader !! Execute following comands these worked on Motorola devices but will work on other too !!
Code:
fastboot devices
fastboot erase modemst1
fastboot erase modemst2
fastboot erase cache
fastboot reboot
somyatiwari59 said:
Recently i also got into the same situation and the other day i had an early morning flight to catch, so i was in a hurry, i seeked all over the net but didn't got any solution other then flashing the ROM again which was a headache. Here i get you the solution of the same without formating the device !!
Boot your device to bootloader !! Execute following comands these worked on Motorola devices but will work on other too !!
Code:
fastboot devices
fastboot erase modemst1
fastboot erase modemst2
fastboot erase cache
fastboot reboot
Click to expand...
Click to collapse
Hello,
How & where to run these commands for my OnePlus 2 ?
For OP2, there is a Toolbox which runs in DOS on PC.
Am I supposed to put my phone in Fastboot mode, & then run these commands on the DOS based toolbox ?
Actually, I tried to change Radio Band of my phone, which resulted in one of my 3G SIM not getting detected !
but other LTE sim, is working fine though.
https://www.youtube.com/watch?v=-IGDZxeFHAc
My problem is listed here:
http://forum.xda-developers.com/showpost.php?p=68430659&postcount=7669
Hi, i have the same problem with my Xperia M4 Aqua. I stupidly pressedat the "Select Radioband" option and moronly select "USABand". Now my phone can't make nor receive a call and only runs in LTE Network.I have read some forums that suggested me to install the MTK Engineering and I have tried to download the MTK Engineering Mode, but it won't also run in my phone, it says that my phone isn't supported. Now i've been so confused.
Is factory reset my device is a wise option and can fix the problem?
did ne1 say chnge it back
Use somthing like xprivacy or that, mine has gsm umst or auto, its in settings using the app root or not, :crying: :good:
So here's my issue, my Galaxy S Blaze has been switched from ROM to ROM constantly, I have seen ROMS with modified build.props, other added features, and a bunch of other tweaks, you name it! I don't know what all those tweaks mean, I have no idea if it could affect the way my phone receives the signal but it got me so frustrated that I kept switching roms until finally then I went back to stock and am no longer am switching to another ROM.
Here's a history of the ROM switching I've made in the past couple of months:
1st - MIUI
2nd- Cyanogenmod
3rd- Gummy ROM
4th- Liquidsmooth ROM
5th- Cyanogenmod
6th- Dirty Unicorns (problems with signal started occurring right about here, and onwards)
7th- Stock ROM (hmm... nope nothing fixed.)
8th- Validus (still no, I didn't like the constant force-closing of many apps)
9th- Gummy ROM (nope, what's worse is my screen kept freezing if I had atleast 2 apps open and I slid down the notification drawer)
10th- Cyanogenmod (well, maybe switching to cyanogenmod will fix it)
11th- Gummy ROM (*sigh* switching back? Nope, still didn't help my signal)
12th- Stock ROM (you would expect it to be fixed right about here, but nope)
So what's up what is the exact problem with my signal? Here's the thing: My signal works! That's a start atleast. However, if I turn on my Wi-Fi while I'm home, I can still call/text people, all of that works. But after maybe 2 hours or so, the signal bar is still there, it's telling me it has signal and it's connected, SOMETIMES it will be empty meaning I have no signal(when I really do). But in reality, I can't receive texts, nor calls, none of that. So how do I fix it? By restarting my phone sadly, that has been the only solution for me for these past 2 months. People have complained to me because I don't answer my phone anymore, well I'm sorry my phone can't receive those calls due to this messed up signal. There are 3 other T-Mobile phones in the house that have no problem! The problem here is with my Blaze phone.
So what if I turn the Wi-Fi off for the whole day and see if it's the main thing causing the issue? Well, I did this. Turns out that the signal stays on longer than when I'm on Wi-Fi but it still goes out. I have switched SIM Cards, I have tried switching my APN: from "epc.tmobile.com" to "fast.t-mobile.com" but the problem appears to happen more quickly on the "epc" one than the "fast" one. Please help me with this, this has been frustrating me a lot lately. I'm not sure if anyone has even had the same exact problem that I'm having, I've searched online but haven't seen a similar problem.
Some of you might say, wow that is a lot of ROMS you've switched to, I'm sure there were more that I missed but that's as of recent. I can install ROMS correctly, I know how to use CWM when installing a .zip and using Odin when it's a .tar(or other supported file extensions). I've factory reset, wiped the cache, the dalvik cache, all before installing a new rom. After installing each rom, I've also factory reset and wiped the cache to make sure no other problems could affect the way the rom would work. Hopefully I did the procedure right, thanks for anyone who's willing to help me!
Right now I am running:
Baseband Version:
T769UVLH5
Kernel Version:
3.0.8-perf-T769UVLH5-CL990184
[email protected] #1
SMP PREEMPT Fri Aug 17 15:12:14 KST 2012
Android Version:
4.0.4
Another Issue is that I can't even transfer files to and from my phone when connected to my computer! This is another big issue, here are some images:
http :// i.imgur.com/xx699ss.png
http :// i.imgur.com/1wRzJpX.png
Here's what happens when I turn Wi-Fi Calling on but maybe it's just a built-in function that I forgot it had and it's probably normal:
http :// i.imgur.com/cTSqRci.png
By the way, sorry for the links just copy and paste them in a browser to and remove the spaces between the http :// and i.imgur, thanks! Unfortunately, I can't post links until I reach 10 posts. If the links don't work for you, I've also provided attachments.
Many thanks!!!
That last picture does show the proper function of Wi-Fi calling however I don't know what to say about the rest of your problems.
Sent from my SAMSUNG-SGH-T769 using XDA Free mobile app
There are two things I would recommend trying...
1. Use Blackhole System Wipe
I know you've been following all the proper steps in CWM (and I would say to keep doing so), but I've added using Blackhole, in addition to the first steps, and I always get great system performance on my phone, and my parent's phones (I put them on ProvisionMod after stock was being stupid). It works well for pre installation for ANY ROM and helps prevent pesky issues. However, chances are, your issue is baseband related and this probably won't solve it... But still! You never know! It's worth a shot!
2. Reroot your phone
I know this will be annoying and pesky... but sometimes the process goes wrong from the beginning and starts giving issues later on... When I first rooted my mom's blaze, something went wrong, despite my following all the directions, and one of her partitions was completely disabled, no matter the ROM. I redid the process of rooting her phone (not from GB though... From the ICS stock) and fixed the issue instantly! I would try these two steps first and see if they do anything! Good luck!
Sent from The Doctor's Blaze
It appears that 4G doesn't work with FreedomPop and most custom ROMs. It seems like either custom roms are detected by FreedomPop and disactivated from 4G, or (more likely) most ROMs have the wrong 4G information wrong for FreedomPop.
It could well be that most roms incorrectly detect the FreedomPop 4G network as Sprint. I know a similar problem exists with Credo Mobile, in which case changing the APN network information solves the issue.
Moreover, on reddit someone claims 4G works on cyanogen 7 but not on later version. Maybe that could help solve the issue?
I'd be very happy if one of you could help me figure what is wrong, or if you got 4G to work with a custom ROM on FreedomPop.
Solved!
Basing myself on the Boost Mobile APN fix, I made a new fix that should give 4G/LTE to FreedomPop users.
Download the FreedomPop fix here.
Just download the fix, put it on your phone, boot into your recovery (I suggest Philz), select Install Zip, and install the fix.
This new fix, compared to the previous one has the benefit of providing an extra APN (n.f6.ispsn) that should give superior performances. Moreover, the fix should be more robust, being based on the Boost Mobile fix instead of the Ting fix. Finally, it will also display "FreedomPop" (instead of Sprint) as your provider.
The previous method is also listed here in case it is of interest to you.
Previous method:
I found a way to get 4G on FreedomPop with Cyanogenmod 11! Just follow these simple instructions:
1. Download the Ting APN fix for Android 4.4 on your PC
2. Unzip the Ting APN fix somewhere.
3. Replace the apns-conf.xml file in system/etc/ directory of the unzipped Ting APN fix with this file: http://www.mediafire.com/view/25xozc3p6okf8zw/apns-conf.xml
4. Re-zip the Ting APN fix (with the modified apns-conf.xml), and put in on your phone.
5. Boot to Philz recovery, select Install Zip, and install the modified Ting APN fix. Voila! 4G/LTE should work (make sure to enable it in settings/mobile networks!)
Note that this will work on the S3, but may not work on other phones. To obtain proper apns-conf.xml file, I recommend you flash to 4.3 stock rom, and copy the apns-conf.xml file from /system/etc/apns-conf.xml file of your android and use that instead for step 3.
Freedompop phone to a Sprint Account
Hey guys, I have a nice Freedompop Galaxy s3 that came straight from FP rooted with their proprietary ROM. But the FP ROM is designed to use VOIP to make all calls and seems to do away with any actual cdma(?) dialer altogether. It's a nice phone for $200.00 and I think I'd like to keep it. But when I tried to activate it on my Sprint account, they get an error on their end and don't recognize it.
This question is for you hardcore developers out there. How can I completely reprogram it to a rooted sprint firmware with a dialer and activate it in place of my older HTC 4G LTE. But also "save" the FP ROM for restore if it won't activate. I have til October to return it, so I thought I'd play.
You should also know 1) that FP definitely runs on the sprint network and seems to work exclusively through their 3g/4g lte service (hence the proprietary ROM and no solid phone connectivity); 2) this galaxy is marked as "refurbished" (in pristine condition) and has no Sprint logo on it all (they asked me about this on the sprint chat site); 3) the battery drained pretty fast and the phone would get warm (my HTC never had these issues, though it seems to be common among s3 owners); 4) but all that being said, it's super fast (cf. to EVO) and I think I might enjoy the upgrade at this price.
Thanks for thinkin on it.Masterhanger
masterhanger said:
Hey guys, I have a nice Freedompop Galaxy s3 that came straight from FP rooted with their proprietary ROM. But the FP ROM is designed to use VOIP to make all calls and seems to do away with any actual cdma(?) dialer altogether. It's a nice phone for $200.00 and I think I'd like to keep it. But when I tried to activate it on my Sprint account, they get an error on their end and don't recognize it.
This question is for you hardcore developers out there. How can I completely reprogram it to a rooted sprint firmware with a dialer and activate it in place of my older HTC 4G LTE. But also "save" the FP ROM for restore if it won't activate. I have til October to return it, so I thought I'd play.
You should also know 1) that FP definitely runs on the sprint network and seems to work exclusively through their 3g/4g lte service (hence the proprietary ROM and no solid phone connectivity); 2) this galaxy is marked as "refurbished" (in pristine condition) and has no Sprint logo on it all (they asked me about this on the sprint chat site); 3) the battery drained pretty fast and the phone would get warm (my HTC never had these issues, though it seems to be common among s3 owners); 4) but all that being said, it's super fast (cf. to EVO) and I think I might enjoy the upgrade at this price.
Thanks for thinkin on it.Masterhanger
Click to expand...
Click to collapse
If I understand the issue, you got yourself a FreedomPop phone that you wish to activate with Sprint (NOT with FreedomPop)?
If so, I see two potential issues:
1. Your phone IMEI is with FreedomPop, and thus no longer recognized by Sprint. You'll have to ask Sprint to get your IMEI back, if possible.
2. You are using a FreedomPop ROM, and that ROM doesn't allow Sprint activation. Hopefully the actual phone is the same as the Sprint version and only the ROM is different. If you go to Settings and the model number is SPH-L710 then you are probably good. Try installing a Sprint stock ROM and then activate. I strongly recommend you backup your entire phone (including boot and efs) before you do that through, preferably through Odin - but be warned that you may hard brick your phone.
Works, but no sprint optimizer, profile update, or PRL
Hey Merudo,
I really appreciate the fix, thank you for that! However, as you can see in the title, there is no sprint optimizer, profile update or PRL update. That is really important stuff as the networks changes and upgrades all the time. Is there any way that file can be included too? Maybe I'm missing something, but the Tink fix said that there should be a sprint network update for the profile and PRL next to the CyanogenMod updates in About phone in the settings, but I never saw that when I put that on my phone. I have a Galaxy S3 phone I bought from freedomPop, but I absolutely hated the Samsung ROM so I wanted to flash CyanogenMod and now I'm having problems. I hope you have some ideas or can clear things up. Thanks again for the fix, and I saw your post on CyanogenMod site about this, that would be awesome if they did put this file into the ROM!
ColdHot said:
Hey Merudo,
I really appreciate the fix, thank you for that! However, as you can see in the title, there is no sprint optimizer, profile update or PRL update. That is really important stuff as the networks changes and upgrades all the time. Is there any way that file can be included too? Maybe I'm missing something, but the Tink fix said that there should be a sprint network update for the profile and PRL next to the CyanogenMod updates in About phone in the settings, but I never saw that when I put that on my phone. I have a Galaxy S3 phone I bought from freedomPop, but I absolutely hated the Samsung ROM so I wanted to flash CyanogenMod and now I'm having problems. I hope you have some ideas or can clear things up. Thanks again for the fix, and I saw your post on CyanogenMod site about this, that would be awesome if they did put this file into the ROM!
Click to expand...
Click to collapse
Hi ColdHot,
Sadly, profile/PRL update on custom ROM is a problem on all Sprint providers (Including Boost, Credo, FreedomPop, Ting, Virgin Mobile, and Sprint itself).
As far as I know, no custom ROM has built-in support for profile/PRL update for any of these providers.
I believe most people deal with the issue by switching back to a stock rom each time they wish to update profile or PRL. I personally switch back and forth between two full backups I make with Philz Touch Recovery.
Please do tell me if you ever find a better way!
Merudo said:
Basing myself on the Boost Mobile APN fix, I made a new fix that should give 4G/LTE to FreedomPop users.
Download the FreedomPop fix here.
Just download the fix, put it on your phone, boot into your recovery (I suggest Philz), select Install Zip, and install the fix.
This new fix, compared to the previous one has the benefit of providing an extra APN (n.f6.ispsn) that should give superior performances. Moreover, the fix should be more robust, being based on the Boost Mobile fix instead of the Ting fix. Finally, it will also display "FreedomPop" (instead of Sprint) as your provider.
The previous method is also listed here in case it is of interest to you.
Previous method:
I found a way to get 4G on FreedomPop with Cyanogenmod 11! Just follow these simple instructions:
1. Download the Ting APN fix for Android 4.4 on your PC
2. Unzip the Ting APN fix somewhere.
3. Replace the apns-conf.xml file in system/etc/ directory of the unzipped Ting APN fix with this file: http://www.mediafire.com/view/25xozc3p6okf8zw/apns-conf.xml
4. Re-zip the Ting APN fix (with the modified apns-conf.xml), and put in on your phone.
5. Boot to Philz recovery, select Install Zip, and install the modified Ting APN fix. Voila! 4G/LTE should work (make sure to enable it in settings/mobile networks!)
Note that this will work on the S3, but may not work on other phones. To obtain proper apns-conf.xml file, I recommend you flash to 4.3 stock rom, and copy the apns-conf.xml file from /system/etc/apns-conf.xml file of your android and use that instead for step 3.
Click to expand...
Click to collapse
OH MY GOODNESS THANK YOU SO MUCH MAN!!! I've seriously tried everything to get my 4G to work on my cyanogenmod infused freedompop (although its a sprint deivce) even by inputting my own apn's I found on the web. I was seriously even considering switching back to sprint just because 3g speeds just weren't cutting it. This finally did the trick. Thanks so much!
So ur fkashed to boostmobile with a freedom pop lte card in getting 4g lte? And boostmobile 3g and voice??
Sent from my SM-G900P using Tapatalk
Wicked X on Freedompop
I was running Wicked Sensations when I switched to FP. Nothing but headaches all around. Couldn't place calls off wifi, no 4G, PRL or Profile updates. FP support was useless at trying to resolve.
I then switched to Wicked X and the phone is running smooth. Optimizer, 4G, PRL and Profile updates are all working fine. I'm getting better battery life than my wife's phone we just purchased from FP running their ROM. Seems to be a good ROM so far for FP service.
Thanks, Merudo.
For anyone wondering, I applied this on a 5.0 rom on my S3 and it seems to work great.
usjbm said:
Thanks, Merudo.
For anyone wondering, I applied this on a 5.0 rom on my S3 and it seems to work great.
Click to expand...
Click to collapse
thanks for your information,
can you set the messaging (from freedompop) as defaulted dialer?
I tried the cynammod rom, when I used messaging app to dial the original dialer alway launched out, it is very annoying, so I have to flash back to freedompop rom.
has 5.0 the same problem? thanks!
New Fix Disclaimer
Hey Merudo,
I may get an S4 to use with FP and noticed your old fix had a disclaimer that it may not work on non-S3s. Could you clarify if the new fix has the same disclaimer? I see your comment in the .sh file says it handles universal lte builds but just want to make sure before purchasing otherwise I'll probably just go with an S3.
Not working... loosing my mind=(
I just moved and should be looking for work but, instead, I'm loosing my mind trying to make this work on my Sprint S4 running and, albeit, weekly build of CM12. For the love of god, has anybody figured anything out with that? It's really hard to network when I have no way of getting back to people. Not to mention how much I just spent on this phone.
Please help
I haven't been able to get any APN fix to work for freedompop on any Lollipop rom on my S4.
I get 3G without applying any fix, and either nothing happens, or I can't connect at all when using one of the 3 APN fixes I found.
Not sure why they don't work.
Can't seem to get data 3G/4G to work.
Can't seem to get data 3G/4G to work. When I disable wifi, I lose my Sprint(Freedompop) connection. I cant connect to the internet, etc.
I've tried these so far but nothing worked for me:
Universal_vmu_ApnFix-v.R2.zip
Freedompop APNs fix.zip
I love how fast this ROM is and want to make it my daily use phone.
Is there a specific process for getting it to work? Just want to make sure I'm not missing something.
Any advice/help is appreciated.
Freedompop (Sprint) SPH-L710 (Samsung Galaxy S3)
CM version 12-20150120-UNOFFICIAL-d2spr (lollipop 5.0.2 unofficial)
Baseband version: L710VPUDND8
EDIT: Is there a specific way to install to get it to work or? Or any other info I can provide that will help?
My current install went like this: wipe cache, wipe devik, factory reset, install CM12 ROM, install Freedompop APNs fix.zip, install gapps-1p-20141109-signed.zip, install Freedompop messaging, confirm registration, disable wifi, and no 3g/4g.
030415 Edit: My issue is resolved! I dialed *#*#4636#*#* and the TESTING screen came up immediately. Under "Set preferred network type:", I switched it to: LTE/GSM/CDMA auto (PRL) in the dropdown menu. I then turned off my WIFI, and LTE immediately showed up! I tested going to a webpage and it works!! I cannot thank you (shakim24 and XDA) enough!!! Turning the WIFI back on is a little tricky and requires some patience, but it will come back on. :good: :victory: :highfive:
Works for Nexus5 CM12 weekly
I am using multi rom with stock as the primary rom. I used that to update PRL and everything works as expected without any modifications. However, the CM12 data settings did not work without the FIX attached in this thread.
What ROM?
usjbm said:
Thanks, Merudo.
For anyone wondering, I applied this on a 5.0 rom on my S3 and it seems to work great.
Click to expand...
Click to collapse
Can you tell me what ROM you used, because I have not been able to find one for my S3
Should I download the fix from the attachment or on the link?
They seem to be different.
UPD: one in attachment seem to be better (more settings in the apns-conf.xml)
I'm also attaching another version of this fix with even more APNs for Freedompop. It equals the setup that came with original FreedomPop ROM
i am having same issue and none of these PRL's work. Can you tell me which fix you used before modifying the settings in TESTING menu
---------- Post added at 11:10 PM ---------- Previous post was at 11:08 PM ----------
donclark said:
Can't seem to get data 3G/4G to work. When I disable wifi, I lose my Sprint(Freedompop) connection. I cant connect to the internet, etc.
I've tried these so far but nothing worked for me:
Universal_vmu_ApnFix-v.R2.zip
Freedompop APNs fix.zip
I love how fast this ROM is and want to make it my daily use phone.
Is there a specific process for getting it to work? Just want to make sure I'm not missing something.
Any advice/help is appreciated.
Freedompop (Sprint) SPH-L710 (Samsung Galaxy S3)
CM version 12-20150120-UNOFFICIAL-d2spr (lollipop 5.0.2 unofficial)
Baseband version: L710VPUDND8
EDIT: Is there a specific way to install to get it to work or? Or any other info I can provide that will help?
My current install went like this: wipe cache, wipe devik, factory reset, install CM12 ROM, install Freedompop APNs fix.zip, install gapps-1p-20141109-signed.zip, install Freedompop messaging, confirm registration, disable wifi, and no 3g/4g.
030415 Edit: My issue is resolved! I dialed *#*#4636#*#* and the TESTING screen came up immediately. Under "Set preferred network type:", I switched it to: LTE/GSM/CDMA auto (PRL) in the dropdown menu. I then turned off my WIFI, and LTE immediately showed up! I tested going to a webpage and it works!! I cannot thank you (shakim24 and XDA) enough!!! Turning the WIFI back on is a little tricky and requires some patience, but it will come back on. :good: :victory: :highfive:
Click to expand...
Click to collapse
i am having same issue and none of these PRL's work. I am on CM 12.1, can you tell me which fix you used before modifying the settings in TESTING menu
Update : i finally got it working with flashing the PRL in first post but the phone works only when Data is enabled. when Data or wifi is switched off, i am not able to make or receive any calls. Does anyone has the same issue.
ajeevlal said:
i am having same issue and none of these PRL's work. Can you tell me which fix you used before modifying the settings in TESTING menu
---------- Post added at 11:10 PM ---------- Previous post was at 11:08 PM ----------
i am having same issue and none of these PRL's work. I am on CM 12.1, can you tell me which fix you used before modifying the settings in TESTING menu
Update : i finally got it working with flashing the PRL in first post but the phone works only when Data is enabled. when Data or wifi is switched off, i am not able to make or receive any calls. Does anyone has the same issue.
Click to expand...
Click to collapse
You can only make/receive calls when Data is enabled? It doesnt work via wifi? While data is turned off, open the Freedompop Messaging app and see if indicates that you are registered. What happens specifically when you try to make a call? (what errors or messages do you get)