Related
Seriously stupid mistake.. was in Rom manager and loaded alt recovery.. drinking a bit and thinking I was using my Evo 4g.. so Amon Ra loaded and all I get now is default samsung splash screen!!! what an idiot. also when I plug in a usb at boot I just get this loading circle that freezes immediately. ..... Did I kill it?
I'd go into download mode and reflash it.
Sent from my SGH-T959V using Tapatalk
Not familiar with samsung.. just switched from my EVO.... but after doing a bit of r&d I finally figured out how to get to the yellow triangle download screen. Currently downloading odin 1.7.. and downloaded the odin t959vbk5.tar file.... any information would be greatly apprecaited... not sure what to do next.. i plan on running odin 1.7 though
Thats all u need just put phone in download mode and use odin to flash one of the roms in the forum its really easy im new to samsung aswell and I got it on first try yheres a guide for noobs in the forum on how to flash with odin too.
Sent from my SGH-T959V using XDA Premium App
1. Open odin
2. On odin there is a button named PDA click on it and load the .tar file (kb5, kc1, kd1)
3. Put phone into download mode
4. Click start
Hope your good after now
Sent from my SGH-T959V using XDA Premium App
thanks for the reply guys..
got odin 1.7 and 1.3.. and it downloads.. I get the blue bar loading on the phone about 99 percent .. and gets just about 100 percent then.. odin says "FAIL" in red.. .. I'm gonna keep trying stuff but if you have any experience with this error let me know..
Thanks!! .. I'm feeling like there's hope now!
Is this gonna be one of those cases where there is no hope until a .pit file becomes available?
How did you fix???
I am having the same issue.
I run Odin 1.85 and I get to 99% and it dies right after it says Data.
hammermedia said:
I am having the same issue.
I run Odin 1.85 and I get to 99% and it dies right after it says Data.
Click to expand...
Click to collapse
Try it with the kg4 leak in the dev section
Sent from my SGH-T959V using XDA Premium App
If you don't want GB, look for RaverX3X's KC1.
Download the KF2 or any rom.
Put phone in download mode.
Open odin. Any version over 1.0.
in PDA section, input the KF2.tar file or rom you downloaded
In Pit section, input the .0512 pit file. Click start and youre good to go.
Sent from my SGH-T959V using XDA Premium App
I Downloaded and installed your rom from HERE using rom manager, And I'm not sure what I did wrong but when I turn on my phone it goes to Phone Logo screen (first screen) then all black with a corrupted blue lines at the bottom about half an inch long. Then, a couple seconds later it goes to a full corrupted screen. then it just does everything repeatedly.
Sorry I can't take screen shots since my phone doesn't work. But any idea of what I might of done wrong?
My phone is already rooted and CwM was already installed. Not sure if the installation process was messed up or not. And I can't get my phone into the CwM recovery to fix this problem.
Dark9 said:
I Downloaded and installed your rom from HERE using rom manager, And I'm not sure what I did wrong
Click to expand...
Click to collapse
There are a bunch of threads and a sticky! (2nd topic in the Dev Forum) that state Rom Manager does not work with this phone. That is what you did wrong.
you should have flashed the rom in CWM, but since the damage is done, you will have to get the phone in download mode and use ODIN to flash a new rom and start over again.
Hopefully, you can still get in DL mode by holding both volume buttons at the same time and inserting the USB cable.
use FB's starter pack post for the files you need for ODIN, and don't use Rom Manager anymore!
http://forum.xda-developers.com/showthread.php?t=1223765
Or you can use the easier more stable alternative: Heimdall one click
http://forum.xda-developers.com/showthread.php?t=1422824
Sent from my SGH-T959V using XDA App
I tried to do the One-Click. But for some reason A caution sign in-between the link connection of the phone and pc..
EDIT: I've Tried pulling everything out battery, sim, sd, usb cord both end. waited a couple mins... then put everything back and tried again..
Dark9 said:
I tried to do the One-Click. But for some reason A caution sign in-between the link connection of the phone and pc..
EDIT: I've Tried pulling everything out battery, sim, sd, usb cord both end. waited a couple mins... then put everything back and tried again..
Click to expand...
Click to collapse
That's another download mode screen. The previous screen you described sounds like you didn't have the right boot loaders in place. Check out The KJ6 Heimdall One-Click Collection. Select any of the three of those you want to use, and follow Bhundven's instructions (really easy). All you need to have installed previously is Java.
Let us know how it goes.
Dark9 said:
I tried to do the One-Click. But for some reason A caution sign in-between the link connection of the phone and pc..
EDIT: I've Tried pulling everything out battery, sim, sd, usb cord both end. waited a couple mins... then put everything back and tried again..
Click to expand...
Click to collapse
This is another form of download mode. Heimdall should recognize the device and flash it.
Sent from my SGH-T959V using XDA App
Dark9 said:
I tried to do the One-Click. But for some reason A caution sign in-between the link connection of the phone and pc..
EDIT: I've Tried pulling everything out battery, sim, sd, usb cord both end. waited a couple mins... then put everything back and tried again..
Click to expand...
Click to collapse
I think thats like the last resort for our phones. I get it if i mess up during the first attempt to unbrick
Sweet thanks for the help I've got my phone UP and running now. ^^
Dark9 said:
Sweet thanks for the help I've got my phone UP and running now. ^^
Click to expand...
Click to collapse
Sent from my SGH-T959V using XDA App
> rom manager
Found the problem
Sent from my SGH-T959V using XDA App
tehgyb said:
> rom manager
Found the problem
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Lol
That or ignoring the sticky (first threads) in the development section entitled "don't use ROM manager"
Sent from my SGH-T959V using XDA App
Bassmanjames said:
Lol
That or ignoring the sticky (first threads) in the development section entitled "don't use ROM manager"
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Yeah. Lots of people don't read those. They just want to flash a ROM as quickly as they can. All the noobs should get a popup when they first join xda instead so they DO read it. Lol
-Sent From My Amazing SGS4G-
After the popup they should get quizzed on what they read lol
Sent from my SGH-T959V using XDA App
erikmm said:
After the popup they should get quizzed on what they read lol
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
We need operation iron fist back lol
Sent from my SGH-T959V using XDA App
The only reason I used Rom manager is cause I was told it was one way to install the roms
I tried going back to gingerbread using Heimdall 1 click and it gives me a kernel error and failed. Now phone won't boot past the rogers logo. Any suggestions? No samsung screen. No green battery indicator when plugged in. Heimdall does detect the phone, and I've tried all USB ports and cords at my disposal. I use a mac so no access to odin. This is the first brick I haven't been able to get myself out of. Any help you would be appreciated
I am a gt i9000 owner, but can you get into download mode?
Sent by Santa Clause
If you can get download mode, then flash a gingerbread stock rom, even if it means you will lose root still do it, then flash a new rom of your choice, if you can get into download mode then you haven't got a brick
Sent by Santa Clause
Been bricked more than once...you have?
Embarking on a fresh new ROM without educating oneself can be very frustrating....since your on a Mac..with in the one click you say it reading your phone...can you get to download mode?
Pull battery
Plug in USB to phone
Hold both volume button
Pop battery back in
Do you see...the yellow Android digging?
http://forum.xda-developers.com/showthread.php?t=1293751
bigjoe2675 said:
Been bricked more than once...you have?
Embarking on a fresh new ROM without educating oneself can be very frustrating....since your on a Mac..with in the one click you say it reading your phone...can you get to download mode?
Pull battery
Plug in USB to phone
Hold both volume button
Pop battery back in
Do you see...the yellow Android digging?
Click to expand...
Click to collapse
I can get into download mode.heimdall detects my phone. I tried both qksters and adam outlers 1 click. neither would take. If I upgrade heimdall version (as it tells me its out of date) it wont get through the initial connection to the phone. if I use with out upgrade it continues to fail on kernel download.
This is my second brick (first one was when trying to root it on my mac) First brick was fixed through odin at my work. Unfortunately I don't want to wait till monday to have a functioning phone
teknhard said:
I can get into download mode.heimdall detects my phone. I tried both qksters and adam outlers 1 click. neither would take. If I upgrade heimdall version (as it tells me its out of date) it wont get through the initial connection to the phone. if I use with out upgrade it continues to fail on kernel download.
This is my second brick (first one was when trying to root it on my mac) First brick was fixed through odin at my work. Unfortunately I don't want to wait till monday to have a functioning phone
Click to expand...
Click to collapse
Hummmm..ok
Let's step back here does out prompt you for drivers?
....you might have to make a stop at your office..
Try different USB ports, I used heimdall yesterday to go back to gingerbread (so I could get the boot loaders) and I had the same problem as you, I finally got it to work with a different USB port and even then it kept failing...but I just kept trying and eventually it went through
(Pull battery, place battery back in, hold volume up and down, plug USB in-should put you in download mode...even if you can't see anything on your screen you can still enter download mode)
Sent from my SGH-I997 using XDA
DOesnt prompt me for drivers. It detects my phone and says ready to flash. I see the download mode screen. so its not completey screwed. Just can't get past the rogers logo.. I only have two USB on my macbook.. tried both quite a few times guess i'll mess with it some more. see if I can get it going. Thanks for the tips. ANy others ideas would also be appreciated
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
theROMinator said:
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Funny I just did that yesterday using qkster heimdall after running the ics for the day....no issues utilizing it...so i say it does work...
theROMinator said:
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
bigjoe2675 said:
Funny I just did that yesterday using qkster heimdall after running the ics for the day....no issues utilizing it...so i say it does work...
Click to expand...
Click to collapse
I did not mean to be misleading, as you both have said, either or may work, I simply wanted to share my experience
mg2195 said:
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Sent from my SGH-I997 using Tapatalk 2 Beta-5
mg2195 said:
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Agreed. On my desktop (quad core 6 gb ram, watercooled blablablabl) can't run heimdal nor Odin to save its life.
My netbook (single core atom) took me back from CM9 with Odin like it was nothing.
My 7 year old laptop (running Ubuntu) works great using Heimdal (just run the .jar file as an executable)
theROMinator said:
I did not mean to be misleading, as you both have said, either or may work, I simply wanted to share my experience
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
No ... understood..no worries...there are some many that have never flashed or much less read anything regarding flashing are having so many prob`s...when this ics it's still bring birthed...for the infuse.
Instead of going to the dev section and doing some home work...understanding the basic info....they see ICS and have pictures of Sunday treats....in their mind...having no clue about the current ROM they are on now...Then the questions pop up...from individuals...after wards yelling SOS...But hey it's their phone.
bigjoe2675 said:
No ... understood..no worries...there are some many that have never flashed or much less read anything regarding flashing are having so many prob`s...when this ics it's still bring birthed...for the infuse.
Instead of going to the dev section and doing some home work...understanding the basic info....they see ICS and have pictures of Sunday treats....in their mind...having no clue about the current ROM they are on now...Then the questions pop up...from individuals...after wards yelling SOS...But hey it's their phone.
Click to expand...
Click to collapse
I've flashed lots of roms and never had any issues. Also looked through the forum and know the basics about getting back to stock. I'm no expert, but I have a decent idea what I'm doing. I do appreciate a forum you can ask questions though and have people help out when your stumped. I did what i could from the tools I have at my disposal here, and ran into some problems. I'm not yelling SOS, just asking for some tips as what I have tried hasn't worked. All the same I do appreciate everyones opinions and help they provide. THat's what makes this forum great.
why would you need to heimdall if you are on a rogers infuse? Isn't that for AT&T phones only?
teknhard said:
I've flashed lots of roms and never had any issues. Also looked through the forum and know the basics about getting back to stock. I'm no expert, but I have a decent idea what I'm doing. I do appreciate a forum you can ask questions though and have people help out when your stumped. I did what i could from the tools I have at my disposal here, and ran into some problems. I'm not yelling SOS, just asking for some tips as what I have tried hasn't worked. All the same I do appreciate everyones opinions and help they provide. THat's what makes this forum great.
Click to expand...
Click to collapse
I apologize wasn't directed to you just in general and your correct this forum is great...
Then reflash ics lol
Sent from my SGH-I997 using xda premium
threi_ said:
why would you need to heimdall if you are on a rogers infuse? Isn't that for AT&T phones only?
Click to expand...
Click to collapse
Because I don't have access to a PC for Odin, and the at&t should work to get me out of brick state. I currently can't get past rogers boot screen
GoSooners345 said:
Then reflash ics lol
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
I don't have recovery.. otherwise I certainly would have
Hi, can somebody please help me?
I tried to use Odin to return from a custom rom to a stock rom and after following the instructions to do so, something happened and now im getting the following:
ODIN MODE
PRODUCT NAME: SGH-I727
CUSTOM BINARY DOWNLOAD: YES (1: counts)
CURRENT BINARY: CUSTOM
firmare upgrade encountered an issue.
Please select recovery mode in Kies & try again
and now my phone only boots to this message
.
I am using ODIN 1.85 and it seams like it can read my phone but gets stuck on <ID:0/004>Setup Connection...
I was following this instructions: http://forum.xda-developers.com/showthread.php?t=1652398
I have read similar theads but found that they get CUSTOM BINARY DOWNLOAD: NO and CURRENT BINARY:STOCK, tried to follow those instructions but im guessing its not working because its not the same issue
is there a way to fix this? please help... don't know what to do
What tar file are you using?
Sent from my SGH-I727 using xda premium
Upgrades just don't work via kies sometimes. But what stock TAR are you using?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
DrDoctor said:
Upgrades just don't work via kies sometimes. But what stock TAR are you using?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
im using SGH-I727-UCKJ2-k0nane.tar... and im trying to go from custom rom to stock
I have one that should work, but I'm not at my comp right now. I'll post it when I can.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
acviridiana said:
im using SGH-I727-UCKJ2-k0nane.tar... and im trying to go from custom rom to stock
Click to expand...
Click to collapse
go to sammobile. You may need to sign up but it's free. They have factory firmware for lots of phones. I've heard lots of bad stuff about k0nane tars.
Sent from my SGH-I727 using xda premium
stoopendis said:
go to sammobile. You may need to sign up but it's free. They have factory firmware for lots of phones. I've heard lots of bad stuff about k0nane tars.
Sent from my SGH-I727 using xda premium
Click to expand...
Click to collapse
I am hosting that stock tar on dev host. There are also a bunch on vincoms sticky thread, including mine.
No big deal, he's still in download mode.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
acviridiana said:
im using SGH-I727-UCKJ2-k0nane.tar... and im trying to go from custom rom to stock
Click to expand...
Click to collapse
Here's a UCLF6 TAR for ATT phones. Uploading to devhost.
http://forum.xda-developers.com/showthread.php?t=1785999
stoopendis said:
go to sammobile. You may need to sign up but it's free. They have factory firmware for lots of phones. I've heard lots of bad stuff about k0nane tars.
Sent from my SGH-I727 using xda premium
Click to expand...
Click to collapse
I believe k0nane's works fine except for the fact it trips the flash counter. Sammobile or the sticky threads pointed out are surely your best bet.
extreme noob here
Hey guys, I dont have the exact problem, but i do think my skyrocket i727 is also soft bricked. Ive been researching allot since i dont know too much, and i dont wanna risk my phone dying on me. Any help will be greatly appreciated. While at work (currently deployed, so i can't go into an AT&T store) i used my friends charger to charge my phone. Ok, i put it were all the sockets are, that i always use and have not had any issues with. And it didnt charge, so i plugged it into my friends laptop. I see on my phone the blinking battery, and continue to use my gtalk. Had to step out to work, disconnected the charger and continued on with my day. A few hours later i took my phone out and noticed it kept on vibrating while the screen was black. Took the battery off put it back and nothing. Then took the battery out for like 2 3 hours, and again nothing. It will jus go to the 1st samsung logo, then to the second and go black, then vibrates every other second. I'm going crazy because i dont have a memory card and am soo terrified of losing my pictures and videos. I have read and have had the guys i work with help me, and one friend downloaded the Odis program, but before i use it, i just want to make sure theres nothing else I can do. Again ive read the steps, understand them, but will it delete my pictures?? I apoligize for the length of my thread, just trying to give as much detail as possible. I have never tried to modify my phone, so its still in its original form. Please help. Thank you in advance. Have agreat day
Nohemy73 said:
Hey guys, I dont have the exact problem, but i do think my skyrocket i727 is also soft bricked. . Had to step out to work, disconnected the charger and continued on with my day. A few hours later i took my phone out and noticed it kept on vibrating while the screen was black. Took the battery off put it back and nothing. Then took the battery out for like 2 3 hours, and again nothing. It will jus go to the 1st samsung logo, then to the second and go black, then vibrates every other second.
Click to expand...
Click to collapse
u have a sticky power button, below is a copy from the 1 stop sticky,
[INFO] Skyrocket randomly restarts and vibrates at 2 second intervals ...... possible sticky power button and solution
[INFO] Another thread with a bootloop problem
[INFO] Video of Skyrocket randomly restarts and vibrates at 2 second intervals
you can also search for more threads using "sticky power button"
stoopendis said:
http://forum.xda-developers.com/showthread.php?t=1785999
Click to expand...
Click to collapse
ok, im currently getting ready to try and flash I727UCLF6_I727ATTLF6_ATT.zip fom sammobile... hope this works, becuase this phone sure scared the hell out of me and I don't want to be left with a 400dll brick.
acviridiana said:
ok, im currently getting ready to try and flash I727UCLF6_I727ATTLF6_ATT.zip fom sammobile... hope this works, becuase this phone sure scared the hell out of me and I don't want to be left with a 400dll brick.
Click to expand...
Click to collapse
Just follow Vincoms directions for using Odin to a T. Specially what to check in what box.
Sent from my SGH-I727 using xda premium
stoopendis said:
Just follow Vincoms directions for using Odin to a T. Specially what to check in what box.
Sent from my SGH-I727 using xda premium
Click to expand...
Click to collapse
Ok, so i'm statting to worry... its been a little over 10min and Odin is still on <ID:0/004> system.img.ext4
last time this happened, after 3 hours of waithing on this message, my phone I guess crashed because it started to disply the original message I posted.
What should I do?
its been 30 min now... should I wait? should I unplug the phone and start over or should I just close Odin and start over?
acviridiana said:
its been 30 min now... should I wait? should I unplug the phone and start over or should I just close Odin and start over?
Click to expand...
Click to collapse
Ya you need to figure out what has happened. Are you sure you have Odin setup correctly? you have the file in the right Box (PDA I think). Every other box unchecked except auto reboot..?
http://forum.xda-developers.com/showpost.php?p=28785461&postcount=1
You extracted the TAR file from the zip?
yes, I followed all instructions posted on http://forum.xda-developers.com/showthread.php?t=1652398 and even reinstalled the drivers before beginning.
its still stuck there...should I just unplug the phone and start all over or should I close Odin?
acviridiana said:
yes, I followed all instructions posted on http://forum.xda-developers.com/showthread.php?t=1652398 and even reinstalled the drivers before beginning.
its still stuck there...should I just unplug the phone and start all over or should I close Odin?
Click to expand...
Click to collapse
Yes I think you can safely disconnect. You don't have Kies running in the background? And your phone shows up in the the upper left small window of Odin?
yes kies is not even installed and the phone does show up in the upper left corner of Odin
UPDATE: I decided to get another phone through my insurance and received the same phone as of today (3-11-13) so thanks to everyone that helped me it was a greatly appreciated! Thank you very much next time I root I'll make sure to backup everything and pay really close to everything. Thank you all for helping.
Okay long story short my phone (Galaxy S 4G) is stuck on the screen where it shows a Phone, !, and a Computer. I did some research on the Internet and read something saying that this is an alternative Download Mode. Basically, what I am trying to do is Unroot my phone / revering back to stock, but did some dumb things to the point where I am stuck on this screen. I am currently using Odin to do all of this, but Odin doesn't recognize my phone for some odd reason because its been read before. So I did some research and read that I had to uninstall then reinstall some drivers then reboot my computer then do everything again. I did that, but Odin is still not recognizing my phone. I tried plugging my phone in all USB ports of my computer and its still not recognizing my phone. What do you think I should be doing? I definitely need some help and it would be greatly appreciated if any of you can help me.
Tried a different cable? Wiped data/factory reset?
It's in download mode, that's a good thing.
Which Odin version are you using? Samsung kies installed? You could try uninstalling kies/drivers & go heimdall one click.. search for lumin30's guide (it's sticked in forum). Mash thanks in his thread if it helps
Sent from my SGH-T959V
champ1919 said:
Tried a different cable? Wiped data/factory reset?
It's in download mode, that's a good thing.
Which Odin version are you using? Samsung kies installed? You could try uninstalling kies/drivers & go heimdall one click.. search for lumin30's guide (it's sticked in forum). Mash thanks in his thread if it helps
Sent from my SGH-T959V
Click to expand...
Click to collapse
Well, yes it's in Download mode, but the alternative one with the phone, !, and computer. Also I can't wipe/data factory reset unless theirs a way to get that if so let me know. The version of Odin I am using 1.7, so I tried v1.80 and the latest version which is 3.07. Yes, I have Kies installed with the drivers as well. I also looked into that heimdall one click, but there is too much stuff to do and download that my computer cant handle because it is really old so maybe if there is another way around this that would be helpful other than that I don't know what else to do.
Whatever you did that got it there... was perfect. If you had just flashed it once more when you got to that screen, your phone would have been working ever since.
Now? No clue what you've done with drivers and the like since back then. Try a one-click in a new USB port without installing any drivers?
Does the computer see the device and not Odin or do both see nothing (any beeps ?).
Are you doing the battery drop in while it's connected to the usb? Or booting it (into download mode) then plugging it into computer?
Which Rom are you trying to flash?
Windows should be able to do the one click. Which version (of Windows) are you using?
Sent from my SGH-T959V
miglop said:
Well, yes it's in Download mode, but the alternative one with the phone, !, and computer. Also I can't wipe/data factory reset unless theirs a way to get that if so let me know. The version of Odin I am using 1.7, so I tried v1.80 and the latest version which is 3.07. Yes, I have Kies installed with the drivers as well. I also looked into that heimdall one click, but there is too much stuff to do and download that my computer cant handle because it is really old so maybe if there is another way around this that would be helpful other than that I don't know what else to do.
Click to expand...
Click to collapse
Look for Gremlin Remover in the dev section. It is an Odin One-Click.
lumin30 said:
Look for Gremlin Remover in the dev section. It is an Odin One-Click.
Click to expand...
Click to collapse
Here is the link
http://forum.xda-developers.com/showthread.php?t=1500427
Also try to delete ALL Samsung and Android drivers.
Sent from my SGH-T959V using xda app-developers app
Cooptx said:
Here is the link
http://forum.xda-developers.com/showthread.php?t=1500427
Also try to delete ALL Samsung and Android drivers.
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
You need Samsung drivers for ODIN.
That pesky kies installs them.
Sent from my SGH-T959V
im just trying to get back to stock/unroot but i cant access anything on my phone it just takes me to that screen. when i plug my phone it just says on the bottom right corner of my computer screen that the usb device cant be recognized. thats why i asked if there is a way around all of this
ive tried all usb ports on my computer and i cant get my computer to recognize my phone.
Okay I will try this method...
lumin30 said:
You need Samsung drivers for ODIN.
Click to expand...
Click to collapse
I know. Uninstall it then download fresh ones. Or just plug your phone in again and let it download new drivers.
Sent from my SGH-T959V using xda app-developers app
Odin only recognizes your port only if you actually in the download mode; the one with the picture of the android robot and the word 'downloading.' Here is what you need to do:
1) open Odin program;
2) remove battery from your phone;
3) plug USB cable into computer and your phone;
4) press the up and down volume keys at the same time;
5) As you hold down the volume keys, put the battery back on the phone, and wait for about 3 seconds. You should be able to see the download robot. If it doesn't work, try it again.
Sent from my SGH-T959V using xda premium
It's okay if just decided to get a new phone through my insurance it's fine no need for any of this anymore, but thanks to everyone that helped me. Next time I root my phone I make sure I back up everything that I need!
Sent from my SGH-T959V using xda app-developers app
Well, if you plan to root your new phone in future, you are going to run into this issue again. Backing up the data won't help you get out of this jam. My advice to you is to use your new phone as is; don't try to root or install customize roms <<<---that was a painful experience, but I've mastered the timing to the point it takes only one try now.
If you are a first timer, it is not easy to get into download mode. You have to do a couple of times to get a hang of it. It becomes an art form - just like getting into DFU mode on an iPhone for first time.
Sent from my SGH-T959V using xda premium
---------- Post added at 03:30 AM ---------- Previous post was at 03:19 AM ----------
gizmoscoop said:
Well, if you plan to root your new phone in future, you are going to run into this issue again. Backing up the data won't help you get out of this jam. My advice to you is to use your new phone as is; don't try to root or install customize roms.
If you are a first timer, it is not easy to get into download mode. You have to do a couple of times to get a hang of it. It becomes an art form - just like getting into DFU mode on an iPhone for first time.
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
Sent from my SGH-T959V using xda premium
Or, think of the learning curve he can have with 2... lol
Sent from my SGH-T959V
I'm wondering why no one told OP to use Heimdall One Click back to stock KJ6...
Its really not that difficult dude! Its scarier than it really is . Trust when we tell you. Its gonna be more time consuming than anything else bout 2 maybe 3 hours ...this includes downloading, deleting, re downloading, connecting, disconnecting, "If u can get Odin to open and running on your old computer.You should be able to get Java, Bhundvens 1 click ..and Or Gremlin remover".!!! Kies is only good if you want the Samsung drivers once you've got your phone back to full fledge stock. If you want to save the $130 its gonna cost you for a phone through (Assurion)that in reality isn't worth buying again your better off using that towards a New phone trust me bro I'm no dev and don't speak they're language Lol (I wish) I personally know from frustrating trial and error! Believe that u can do it and when you do it you'll be like wow that's it!!! Just try being more cautious homez.
Sent from my SGH-T959V using xda app-developers app
chris31jct said:
I'm wondering why no one told OP to use Heimdall One Click back to stock KJ6...
Click to expand...
Click to collapse
Actually, champ1919 told him that already. Scroll to first page.
Sent from my SGH-T959V using xda premium