Miui jelly bean rom for alcatel 995 - Android General

I've made this topic for the Alcatel OT-995 MIUI Rom. Update coming soon. Bugs can be reported here.

Boot
Razielwolfy said:
I've made this topic for the Alcatel OT-995 MIUI Rom. Update coming soon. Bugs can be reported here.
Click to expand...
Click to collapse
I tried this ROM, boots and then ask for pin. After giving pin I skipped registeration process and I got message simcard locked restart now to use 3G. After restart It shows xiaomi or MIUI logo then again same process and then restart. It is just stuck in simlock. So had to go back to my official rom.

Just unlock your sim in another phone.Then start the miui rom.I used that rom,but too many bugs .

I flashed this rom, and got stuck at bootloops on first flash.
Then i reflashed it, and the phone booted and then on every input the phone hot-reboots....
Lets hope this rom will be updated and debugged
Greetings,

Any news about this rom ???

Does bluetooth work on this without distortion?

still lots of bugs but runs very smoothly, i hope the released version will be OK :good:
http://forum.xda-developers.com/showpost.php?p=36369770&postcount=3270

Related

HTC One Max Cm11 (HELP PLZ)

My device: HTC ONE MAX (International) , Rooted , TWRP Installed, Hboot 2.49
My Problem/q : whenever i try to flash custom roms that have a cyanogenmod 11 base such as the CrDroid or the AOSB or any rom that has a cyanogenmod base everything works perfect except that when the signals show after like 20 seconds i get "Android.process.phone has stopped error" twice and when i press OK the signals are gone.
Now keep in mind i did a Clean Full wipe Installation.
Someone please take a minute or two and help me with this problem i will be really grateful. thanks alot.
OneLessRoot said:
My device: HTC ONE MAX (International) , Rooted , TWRP Installed, Hboot 2.49
My Problem/q : whenever i try to flash custom roms that have a cyanogenmod 11 base such as the CrDroid or the AOSB or any rom that has a cyanogenmod base everything works perfect except that when the signals show after like 20 seconds i get "Android.process.phone has stopped error" twice and when i press OK the signals are gone.
Now keep in mind i did a Clean Full wipe Installation.
Someone please take a minute or two and help me with this problem i will be really grateful. thanks alot.
Click to expand...
Click to collapse
Thats a bug. Send the bug report to the rom developer. Mine bug on cm11 for moto g was that if the notification bar was filled with details of upcoming alarms the system.ui would force close as soon as i unlock the phone and that happened repeatedly.
Sent from my XT1033 using XDA Free mobile app
OneLessRoot said:
My device: HTC ONE MAX (International) , Rooted , TWRP Installed, Hboot 2.49
My Problem/q : whenever i try to flash custom roms that have a cyanogenmod 11 base such as the CrDroid or the AOSB or any rom that has a cyanogenmod base everything works perfect except that when the signals show after like 20 seconds i get "Android.process.phone has stopped error" twice and when i press OK the signals are gone.
Now keep in mind i did a Clean Full wipe Installation.
Someone please take a minute or two and help me with this problem i will be really grateful. thanks alot.
Click to expand...
Click to collapse
are you using the recovery version specified on CM website?
http://wiki.cyanogenmod.org/w/Install_CM_for_t6
yeah im on the latest TWRP and everything is fine in the roms i flash except for that i get the message "android.process.phone" has unfortunately stopped and then there is no service. this repeats over and over. service comes for 20-40 seconds and then i get the message and then it goes away

H60-L02 return to stock help

Hey guys,
Have had my Honor 6 H60-L02 FDD-LTE for little under 4 hours now
Already unlocked the bootloader and flashed CWM V.6.0.5.1
I installed the MIUI v4.9.6 Rom and i don't really like it, it keeps coming up saying com.android.phone has stopped, and when you update to v4.12 it gets stuck in a boot loop
So I don't think MIUI is very stable for the phone, and I want to install EMUI v3.0 (This isn't lollipop yet is it?)
Long story short, I figure i have to reflash the stock recovery firmware because CWM wont install an Update.App file
I downloaded the Honor 6 Multitool
When i get to install recovery, i choose my honor 6 model then it asks for EMUI 2.3 or 3.0, i tried all the 3.0's and they dont load the recovery, just go back into android
so i tried some of the EMUI 2.3's, i have no idea what each number at the end represent and which one suits my phone... i.e B118SP02?
So that is what stage im at, i have MIUI v4.9.6 with CWM V.6.0.5.1
And i am trying to install EMUI v3.0 stable
Any help would be pretty awesome, can say im slightly disappointed with the availability of roms for this phone, but hopefully this will change in the future
Ok ...
i will start from beginning , i will tell you how to get the last stable update for your phone .
witch is B310【EMUI3.0_Android4.4】.
First Download it from here it's 1GB .
or from here (you should translate it first and click on stable and download) .
Second continue with this link .
Attention : Do step 6 before 5 .
Or go to
http://forum.xda-developers.com/showpost.php?p=57274153&postcount=1
scroll down to: 3 Button Restore not working (If you change between variant example L02>L12) Or Partition been changes and cannot restore back Stock version. Use this steps below : -
Links to the revert package etc are in the post too
Tried Myahyam's method and now the phone is stuck in a boot loop (shows the honor, powered by android splash, goes black then repeats the splash)
need to unbrick the damn thing now
im following the honor 6 multitools unbrick method, its in fastboot transfering files now, will report back when its done.
Just out of curiosity, besides MIUI and EMUI, what other roms are available to flash using CWM or TWRP?
Okay, managed to get CWM back on and sideload the MIUI4 rom again, just to prove to myself that I didn't brick my phone, so that parts all good!
I will have to try your method another time Julsen, i fly out on a 3 week holiday tomorrow morning, and want to load some games and movies to the phone to watch on the plane.
Hopefully when I come back in 3 weeks, there will be a better choice of roms to install using CWM/TWRK
If not, I will attempt your method Julsen, at least i now know how to fix any softboot/bootloop problems, good learning experience all up!
Here u will find couple of custom roms flashable via cwm
http://bbs.anzhi.com/forum.php?mod=forumdisplay&fid=1387&filter=typeid&typeid=15409&mobile=no
Sent from my H60-L02 using Tapatalk
Help me please!
I am having exactly the same problem that serpent is having.
Did any1 found solution?
Hey all, back from my 3 week trip
@nrpetonr i went to that site and grabbed two roms to flash using CWM, they both seem to put it into a boot loop
This phone is strange really, ever since i have unlocked the bootloader and put on a custom rom, its been the only rom that has worked, the rest all put me into a bootloop
Maybe i should try TWRP instead

[Q&A] (Share) Resurrection-Remix-LP-v5.5.1-ferrari

Q&A for (Share) Resurrection-Remix-LP-v5.5.1-ferrari
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for (Share) Resurrection-Remix-LP-v5.5.1-ferrari. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
apna.suresh0305 said:
I think any custom ROM can't replace the MIUI camera, i tried CM 12.1 but camera is very upset in terms of picture clarity as well camera app is very laggy and some times gets hang and wont response. Not able to dare to try custom ROMs due to this reason.
It would be really very great if anyone can able to port MIUI camera to these custom ROMs.
Click to expand...
Click to collapse
Tottaly agrre with you, xiaomi phone camera is main reason for me, too bad none custom rom able to provide equal result from camera miui rom. If there any it would be fantastic
cannot get cwp installed
hey guys,
i cannot get the CWP installed or the TWRP .... i cannot find the link to download and get the phone into the recovery and install the new rom,
please provide me the links and i will try the rom.
ps: i have tried the TWRP TOOLKIT VERSION 3 , BUT BECAUSE I AM IN THE LATEST MIUI VERSION IT DOESN NOT INSTALL THE TWRP, I HAVE TRIED IT MANY TIMES. ALSO THE VIDEO ON YOUTUBE THAT SAYS THE TWRP TOOLKIT VERSION 4 is redirecting to spam websites,
also i am trying to log in in miui but i have forgot my details and there isnt a reset link ! i am getting despert!!!!
thanks
vrtsvas said:
ps: i have tried the TWRP TOOLKIT VERSION 3 , BUT BECAUSE I AM IN THE LATEST MIUI VERSION IT DOESN NOT INSTALL THE TWRP, I HAVE TRIED IT MANY TIMES. ALSO THE VIDEO ON YOUTUBE THAT SAYS THE TWRP TOOLKIT VERSION 4 is redirecting to spam websites,
also i am trying to log in in miui but i have forgot my details and there isnt a reset link ! i am getting despert!!!!
thanks
Click to expand...
Click to collapse
Try version 4 of the toolkit.
That worked for me.
Also, make sure you do exactly as the desctiption says, don't change the order of actions (as i did) because then it will not work.
First make sure that you pc has the right drivers (or use this: http://forum.xda-developers.com/showthread.php?t=2588979)
Then use v4 from this link and use the right order (http://en.miui.com/thread-117336-1-1.html)
So first TWRP then root (if you still need it).
Automatic turn off issue
How to fix automatic turn off issue
WiFi not working
Please provide WiFi driver
Mi4i going into bootloop after flashing CM based roms!
I have tried almost all of the custom roms(latest ones) available for Xiomi mi 4i but neither of them actually worked for me. Whenever i flash the roms, it gets installed correctly and when it asks for language selection, it shuts off. I have tried flashing with both twrp and cwm, cleared cache, dalvik cache but problem never solved. I think the CM has some serious problems with this devices.
aniketmule said:
I have tried almost all of the custom roms(latest ones) available for Xiomi mi 4i but neither of them actually worked for me. Whenever i flash the roms, it gets installed correctly and when it asks for language selection, it shuts off. I have tried flashing with both twrp and cwm, cleared cache, dalvik cache but problem never solved. I think the CM has some serious problems with this devices.
Click to expand...
Click to collapse
Mine is not directly going into boot loop.
Sometimes it works a few minutes (up to 20 or so), but it will shut down.
When connected to power it does NOT shut down, but still.
I tried yesterday the CM 12.1 version from Smoki3 from july 30th and that seems to work, but i did not have any time any more, so i had to restore my nadroid backup.
Will try it later again (maybe tomorrow) if that really does work, or if it was just to short time for it to shut down.
elot01 said:
Mine is not directly going into boot loop.
Sometimes it works a few minutes (up to 20 or so), but it will shut down.
When connected to power it does NOT shut down, but still.
I tried yesterday the CM 12.1 version from Smoki3 from july 30th and that seems to work, but i did not have any time any more, so i had to restore my nadroid backup.
Will try it later again (maybe tomorrow) if that really does work, or if it was just to short time for it to shut down.
Click to expand...
Click to collapse
I think I was using developer rom and flashed CM on it directly so the problem occured. I read somewhere on a forum that you should flash it on global rom. I tried it with ASOPA-L rom as it was having the same problem and it worked flawlessly. Now going to try it with latest CM rom.
One thing I noticed the camera quality is better in ASOPA-L but this rom lacks performance mode.
I'm experiencing bad speaker sound after installing this ROM. Is there any way to fix that.
Sent from my Mi 4i using Tapatalk
I'm absolutely loving this rom. I've no idea why xiaomi let's miui be so slow and laggy. This room feels great and everything runs/opens so much faster and it looks fantastic. Cmon Xiaomi, step up your game, miui is way too heavy.
Like other people have mentioned, the only downside to not having miui is the camera. I've tried a bunch of others and the quality is greatly reduced compared to the miui camera. Please someone, please port miui 6 camera!!! PLEASE!! I'll be your best friend.
Whenever i boot ..it turns off...pls hlp
Thanks in advance
vrtsvas said:
hey guys,
i cannot get the CWP installed or the TWRP .... i cannot find the link to download and get the phone into the recovery and install the new rom,
please provide me the links and i will try the rom.
ps: i have tried the TWRP TOOLKIT VERSION 3 , BUT BECAUSE I AM IN THE LATEST MIUI VERSION IT DOESN NOT INSTALL THE TWRP, I HAVE TRIED IT MANY TIMES. ALSO THE VIDEO ON YOUTUBE THAT SAYS THE TWRP TOOLKIT VERSION 4 is redirecting to spam websites,
also i am trying to log in in miui but i have forgot my details and there isnt a reset link ! i am getting despert!!!!
thanks
Click to expand...
Click to collapse
i also experienced the same problem when i was on miui 7 beta... i was able to flash twrp recovery but failed to flash custom ROMs... after that i reverted back to miui6 6.6.10.0 by using fastboot... and then again flashed twrp using mi toolkit v4 and succeeded in flashing custom ROM... this works 100%.Keep in mind that u can't flash a custom ROM..if u r on later version of 6.6.10.0

Restart loop

Hello
I use a ROM with XT897 CM10.2.1 and SIM MOD CornholioGSM since July 2014, it was working fine.
I flashed the ROM-cm-SNAPSHOT-YOG4PAO23E 12.1-20150901-xt897 (RELEASE) one month ago and the ROM worked well. A week ago, the phone was much slower, I turn off reboot and since it constantly!
I made the following transactions with TWRP:
- Reset factory
- Flash ROM (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897)
- Flash ROM (BlissPop-v4.0.1-xt897-OFFICIAL-20150917-1514)
- Flash recovery (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897-recovery.img)
- Flash TWRP
- Flash ROM (cm 12.1-20151007-SNAPSHOT-YOG4PAO339-xt897)
Always the same, I have the boot logo and the logo of the ROM and the phone reboots.
The ROM (CM12.1) has started once and then restart the phone has rebooted repeatedly.
I tried with or without a SIM card.
I do not understand where does the problem, can you help me?
Well not having the phone in front of me, I don't really quite understand the issue myself - however, I would suggest using RSD Lite and one of the FXZ files to flash everything (including recovery) back to stock.
If you still have issues, there is a bigger problem (likely hardware failure).
Hello
sorry if my explanation was not clear.
I added a photo which shows the two steps in the operation of my phone.
Step 1: Start the phone .
Step 2 : boot ROM CM12
The Step 2 lasts 23 seconds then return to Step 1 and Step 2 and Step 1, Step 2 infinitely .
I hope this is understandable .
I read on the forum that used some RSD Lite but as I had not used for the ROM installation, I did not understand why use .
I'm a new user, i can't post picture, I send link by PM, thanks.
I thought my last post made it clear what purpose RSD Lite and the FXZ files are - they restore the phone to stock completely - ROM, recovery, everything will be reset to when it was stock from the factory (granted it may be a newer image than what shipped on the phone, but you get the point).
Again, as I stated previously, if you still have issues after flashing everything stock your issue is likely not software, but hardware.
I searched the forum about RSD Lite. Now I understand its usefulness.
I used RSD Lite to flash the ROM asanti_c_sprint-user-4.1.2-9.8.2Q-122_XT897_FFW-5-6-release-keys-cid9.xml.zip
My phone had with SPRINT .
The flash went well but unfortunately I still have the same problem :
Step 1: unlocked bootloader screen
Step 2: The red M MOTOROLA
Step 1, Step 2 , .....
Is there another test or I can consider it a hardware problem ?
Hardware problem can come out of the MODSIM ? I use a SIM card in the phone for 16 months.
Nicolas.636 said:
I searched the forum about RSD Lite. Now I understand its usefulness.
I used RSD Lite to flash the ROM asanti_c_sprint-user-4.1.2-9.8.2Q-122_XT897_FFW-5-6-release-keys-cid9.xml.zip
My phone had with SPRINT .
The flash went well but unfortunately I still have the same problem :
Step 1: unlocked bootloader screen
Step 2: The red M MOTOROLA
Step 1, Step 2 , .....
Is there another test or I can consider it a hardware problem ?
Hardware problem can come out of the MODSIM ? I use a SIM card in the phone for 16 months.
Click to expand...
Click to collapse
The hardware issue is likely not related to the SIM modification. As to what exactly has failed, I'm not sure... perhaps the NAND or something else memory related.
Aouch aouch...
Thank you for your help.
I think it remains for me to search for a motherboard for photon Q.
Long life in the forum!
Use "borrowed" TWRP recovery image.
Nicolas.636 said:
Hello
I use a ROM with XT897 CM10.2.1 and SIM MOD CornholioGSM since July 2014, it was working fine.
I flashed the ROM-cm-SNAPSHOT-YOG4PAO23E 12.1-20150901-xt897 (RELEASE) one month ago and the ROM worked well. A week ago, the phone was much slower, I turn off reboot and since it constantly!
I made the following transactions with TWRP:
- Reset factory
- Flash ROM (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897)
- Flash ROM (BlissPop-v4.0.1-xt897-OFFICIAL-20150917-1514)
- Flash recovery (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897-recovery.img)
- Flash TWRP
- Flash ROM (cm 12.1-20151007-SNAPSHOT-YOG4PAO339-xt897)
Always the same, I have the boot logo and the logo of the ROM and the phone reboots.
The ROM (CM12.1) has started once and then restart the phone has rebooted repeatedly.
I tried with or without a SIM card.
I do not understand where does the problem, can you help me?
Click to expand...
Click to collapse
I had a similar incident a few days ago. I have a hard time stopping myself from pushing the limits. Usually I stop when it's broken. I tried RSD Lite, SDB sideload/ flash, zip install from recovery, fastboot(mine's dead), all with no luck.
Any how, If you have CWM, temporarily change to TWRP. If you already have TWRP it's easier.
XDA has a TWRP recovery image in the forum. Put that in your sdcard (I had to paste it from my computer because my xt897 was soft bricked). Flash from TWRP.
Worked fom me. got my phone back after 1 week of flashing everything and then some.
Good luck.
http://forum.xda-developers.com/showthread.php?t=2295643
http://forum.xda-developers.com/showthread.php?t=2295643&page=2
Hello
thank you for this new information.
I tried it and it worked with the ROM [PQ_ICS-Stock] but only with that one!
I tried the ROM [PQ_JB-421] , several Cyanogen ROM but still the same looping boot problem.
I tried several version of TRWP without success .
I do not understand why my Photon Q only works with this ROM [PQ_ICS-Stock] .
Is still a motherboard problem ?
Hello everyone
I'm going crazy !
As I had not managed to solve my problem, I ordered a mainboard on ebay.
Today I realized the SIMMOD on this new board.
when I restarted phone the same startup problems with the ROM SPRINT !
I unlocked the bootloader .
I installed TWRP 2.7.1.2
I installed CM12.1-20151219 - NIGHTLY - XT897
Still the same problem starting loop.
Someone an idea ?
Nicolas.636 said:
Hello everyone
I'm going crazy !
As I had not managed to solve my problem, I ordered a mainboard on ebay.
Today I realized the SIMMOD on this new board.
when I restarted phone the same startup problems with the ROM SPRINT !
I unlocked the bootloader .
I installed TWRP 2.7.1.2
I installed CM12.1-20151219 - NIGHTLY - XT897
Still the same problem starting loop.
Someone an idea ?
Click to expand...
Click to collapse
If you can't RSD Lite, something is up. Either you are not doing the process correctly, or there is something wrong with the device (still).
Perhaps you were always on ICS and never made the official jump to JB? You say you can RSD Lite to an ICS version, just not a JB version? So 4.0.x works but 4.1.x does not?
Again I'm talking stock. If stock doesn't work, I wouldn't even attempt CM. Start with the basics, then work your way towards the aftermarket.
I agree that if the stock rom does not work after the installation with RSD Lite is that it remains something (software) .
The first motherboard I used 12.1 CM for several months it is that the phone supports android 5.1
I agree that it must abort running a stock ROM before flashing a ROM CM. But the ICS ROM STOCK works!
It is possible that I did not do the process correctly .
What surprises me is that the second board had the same problem with the ROM SPRINT !
I will do other tests.
Nicolas.636 said:
What surprises me is that the second board had the same problem with the ROM SPRINT !
Click to expand...
Click to collapse
This is the part that makes me think you are perhaps missing some step in the process somewhere.
Can you RSD Lite to ICS? Not flash it with TWRP. If that is successful, try to RSD Lite to the latest JB again.
I modified the second motherboard ( mod sim card ) and I started the phone with the ROM SPRINT and I got the boot problem repeatedly.
the common point of two motherboards is that they both have a bad ESN .
I will do other tests.
Nicolas.636 said:
I modified the second motherboard ( mod sim card ) and I started the phone with the ROM SPRINT and I got the boot problem repeatedly.
the common point of two motherboards is that they both have a bad ESN .
I will do other tests.
Click to expand...
Click to collapse
Bad ESN shouldn't prevent booting... it would prevent you from activating the device on the Sprint network, but I would imagine you don't care about that...
arrrghhh said:
it would prevent you from activating the device on the Sprint network, but I would imagine you don't care about that...
Click to expand...
Click to collapse
yes
I used RSD Lite 6.1.6 for flashing the ROM [ 2014-03-09 - TSv2 ] but the process has blocked after the flash.
Here is what I did :
1- run RSD Lite
2- Start the phone in FASTBOOT mode.
3- usb phone connection to PC
4- opening of the ROM [ 2014-03-09 - TSv2 ] and "uncompress and start flashing"
5- flash goes well
6- the phone reboots => Logo M red => telephone reboot => Logo M red => again ....
7- RSD Lite waits for the restart ... [ it waits again, LOL ]
8- I turned off the phone and I unplugged.
9- I turned on the phone who start properly, I arrived at the language selection screen .
The ROM is an android version 4.0.4 , I think you know this ROM .
Why the process with RSD Lite has blocked the phone to reboot ?
That's what I did wrong in the process?
I have read many forum post, I tried several methods but only in the ROM 4.0.4 STOCK work. Flashed with RSD lite or restoration of a backup with TWRP.
I have the bootloop problem using RSD Lite 6.2.4 for ROM 4.1.2 CSPIRE or ROM 4.1.2 SPRINT. No error message of RSD lite. No error message of phone.
I've modified the XML file but it changed nothing.
Same problem using TRWP with custom ROM or restoration of a backup ROM4.1.2 JB.
Same problem using OPEN RECOVERY 209 with custom ROM.
Where is the problem ?
I would use CM12 ROM.
Nicolas.636 said:
I have read many forum post, I tried several methods but only in the ROM 4.0.4 STOCK work. Flashed with RSD lite or restoration of a backup with TWRP.
I have the bootloop problem using RSD Lite 6.2.4 for ROM 4.1.2 CSPIRE or ROM 4.1.2 SPRINT. No error message of RSD lite. No error message of phone.
I've modified the XML file but it changed nothing.
Same problem using TRWP with custom ROM or restoration of a backup ROM4.1.2 JB.
Same problem using OPEN RECOVERY 209 with custom ROM.
Where is the problem ?
I would use CM12 ROM.
Click to expand...
Click to collapse
Without having the device in my hands, it's hard to say for sure. The only difference I can see you are doing differently from me is using a newer version of RSD. I doubt that would be an issue, but may want to try other RSD versions.
In the end, I suppose if 4.0.4 works, use that...
Thank you for you help.
I'll buy a other PHOTON Q on EBAY.
I do other test with the new PHOTON Q.
Hello
I received my new q photon.
It is version 4.1.2
I unlocked the bootloader .
I made a backup with TWRP and OPEN_RECOVERY_209 .
I tried an installation of 3 different ROM but I have an error message !
I do not understand where does the problem ?!
Is this a bad version of TWRP or ROM ?

Touch screen mirrored after custom rom

Hey Guys,
So i have a big problem with my International Galaxy S6 Flat. I tried to update from a custom rom to a stock android 6.0 rom and i failed, so i got stuck in a bootloop. I used a custom rom again so i can get out of the bootloop, but when i tried to set the options in the android installation menu i discovered that my x axis got inverted. So whenever i try to press D i get a K.
I even tried to use the *#2663# code which i read on this forum. but this doesn't work, it doesnt show me the menu to download the firmware. is there another way to download that firmware ?
I flashed new kernels,bootloaders, everything. But i just can't fix it. I'm so desperately atm. I hope you can help me.
Thanks.
Anyway. Flash official ROM from Sammobile and you will be fine.

Categories

Resources