[Q] Cant have recovery and boot into a rom. - HTC One S

i can only boot a rom when i choose the recovery option from the bootloader. its the newest possible bootloader.1.14.005 i think.if i want to install a rom i have to go to the bootloader, then install open recovery with fastboot then reboot the bootloader , then reboot to the newly installed recovery wipe everything , install the rom, power off.boot into bootloader load the kernel with fastboot, then restart the bootloader an then if i want to boot in to the rom its just stays on the logo with the red warning, so i taught its a brick but then went to bootloder and chose recovery - this way is boooting the rom.
Please could someone explain it to me - is that the way to do it for now???
Tried to install open recovery from goo manager its says installed but its not, still boots the rom instead.

It sounds like you're flashing the boot image into your recovery partition instead of into your boot partition.

You are the man .Thanks ))

Related

[Q] Clockwork issues

Okay so I rooted unlocked and flashed clockwork with the instructions here
http://forum.xda-developers.com/showthread.php?t=970237
But when I try to boot recovery from bootloader the screen goes black then just pops back up to the boot loader and wont let me access recovery if I check in rom manager it says I have clockwork but why cant I access it.
Did you do this step in the process.
4) Tap and hold on the file "install-recovery.sh" and rename this file to "install-recovery.sh.old".
This is needed if still on stock rom.
If not you have to flash recovery in rom manager everytime you reboot

[Q] in recovery !!

Hi everyone
i have a new problem :S
today i have root my phone
and install clockworld recovery
but when i go to recovery i see Exclamation mark and android logo !!!
i press power + volume up to see option .. but i don't see all option .. like install zip from sd card !!
i want to install CM7 !!
Plz help
That's the stock recovery, not CWM.
You have to boot into bootloader mode then flash CWM recovery image from there. After flashing, select recovvery in the bootloader menu and you'll be in CWM.
suksit said:
That's the stock recovery, not CWM.
You have to boot into bootloader mode then flash CWM recovery image from there. After flashing, select recovvery in the bootloader menu and you'll be in CWM.
Click to expand...
Click to collapse
Sounds like you did not remove /etc/install-recovery.sh if you've already flashed CWM and rooted.
This script is going to install the stock recovery image on each reboot. Boot up - remove / rename this file through root explorer or something similar (or adb if you like) and then reflash CWM either via fastboot or Rom Manager.

cant go to recovery and bootloader..HELP PLEASE

guys i just install mokee release 5.1.1,full wipe and everthing seems to be working,when i installoptimus kernel on the rom..the rom stuck in bootloop,so i long press to go to recovery..then i cant see recovery..when i boot to bootloader,i cant see bootloader to...? but it detect in adb...so what i did i just when to stock from the begining..just the same blank recovery and bootloader...try to flash bootloader and recovery just the same...Help would be needed here

Custom recovery for xperia L

Hi , I have rooted my xperia L and unlocked its bootloader. However when I tried to install a custom recovery, it keeps failing. I have tried both cwm and twrp. For cwm there is no official support so I tried using a custom but it couldn't read it .
For twrp , even though the device shows up in the twrp app , its unable to flash the recovery. it says :
flashing recovery was unsuccessful. Either you already have this recovery installed or another error has occurred. Would you like to attempt rebooting now?
My goal is to install a custom rom on my phone. Can anyone please tell me how to move formward from here ?
Thanks
You must be on the latest stock firmware.
I want you to go to this link " http://forum.xda-developers.com/xperia-l/help/how-to-recover-xperia-l-t3129724/page5 " .
And to replay number #46 and download the attached file.
Extract the the file in your computer and open the cmd in the folder by pressing shift+LMB and write the code:
Code:
fastboot flash boot boot.img
important:connect your phone to the computer in fastboot before pressing Enter, by holding the vol+ and connect it.
Now you can press entre you have now CWM recovery .
Boot to recovery and flash the rom you want.
Note: this recovery is for installing ROMs so if you want to use it with stock ROM so don't use it because it will stop the WiFi .
So just install it and directly install the ROM to have the wifi worked.
Don't forget to hit thanks
do I still have to use cwm rom manager? Because I tried that and it says it can't access the server.
So do I go directly to recovery by using adb reboot recovery ?
No there's no need.
After you done flashing your phone reboot it ,it will show you a led on Sony logo ,when you see this led keep pressing down button until it reboots to recovery .
I forgat to tell you that your phone must be powered of when fastboot
yeah no problem , I remembered to do that.. Got it. Thanks .
Quick question after flashing the rom , should I wipe the cache and delvvik AGAIN before flashing gapps ?
It depends on the ROM .
For example: CM 12 you mustn't flash gapps after flashing The rom, you must reboot to the ROM and then install a new recovery and then install the gapps.
In general I suggest to make factory reset before and after installing a ROM.

Thread Modes Teno W3 won't boot to TWRP recovery after flashing

I flashed TWRP on my tecno W3 using sp flash tool, after it went successfully, i powered my phone into recovery mode with the right combination of keys. But it wont boot into anything, but when i power it into normal mode, it goes successfully..and then i switch off and boot into recovery mode with the same combination of keys i used after flashing, it end up into stock recovery. It's like my phone is locked from booting into custom recoveries(even after unlocking the bootloader), and then it overwrites the custom recovery with stock after booting into normal mode. Is there any way i can get my phone to accept custom recoveries, and i have no root thats why im trying to flash a custom recovery first.
Also: I tried to use adb to boot into fastboot mode and boot into the same custom recovery i have by the command: fastboot boot <filename.img here>..but i didnt boot into anything, it just boot normally like i restarted my phone. I even tried to flash the img file in fastboot mode and then boot up with the fastboot command mentioned above, but it just boots into normal mode.
Specs
Model: Tecno W3LTE W3LTE-H356D1-M-161216V55
Chipset: MTK 6735M
CPU architect: armx64
Android SDK: 23
Android version: Marshamallow 6.0
Bootloader: Unlocked via adb
Did you install SU/Magisk after you flashed TWRP?This can usually prevent this issue.
RAMBO29 said:
Did you install SU/Magisk after you flashed TWRP?This can usually prevent this issue.
Click to expand...
Click to collapse
No, just TWRP. It flashed successfully, but the phone won't boot to anything, and when i force it to boot into recovery mode after flashing a custom recovery, it doesn't do anything, it just stucks in the Hi logo with a red exclamation mark...and i usually have to press the volume + and power button to get to the menu, but the menu for the custom recovery i just flashed fails to pop up. After that, i boot into normal, and it overwrites the custom with stock recovery again (can tell from when i boot into recovery again after booting into normal by bringing up stock recovery)..
I used the recovery i ported myself using calvik image kitchen tool.
My phone does it too. The TWRP asks me if it has to be reinstalled, if default recovery is taking its place. Flash SU or magisk in your recovery immediately after TWRP.

Categories

Resources